Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 09T304 MF 2025 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MF2025-SANDVIK Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2025 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-2025-Sandvik 40END
CCMT 09T304 MF 2220 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MF2220-SANDVIK Facts for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 2220 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-09T304-2220-Sandvik 40END
CCMT 09T304 MM 1105 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Specifications CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM1105-SANDVIK Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-1105-Sandvik 40END
CCMT 09T304 MM 1115 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features for CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM1115-SANDVIK Facts & Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-1115-Sandvik 40END
CCMT 09T304 MM 1125 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM1125-SANDVIK Facts for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-1125-Sandvik 40END
CCMT 09T304 MM 2015 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us a sample insert or drawing by post Detail specifications indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM2015-SANDVIK Dataand Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-09T304-2015-Sandvik 40END
CCMT 09T304 MM 2025 Indexable Insert - Sandvik
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product features CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM2025-SANDVIK Data/ Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2025 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-2025-Sandvik 40END
CCMT 09T304 MM 2035 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product features indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM2035-SANDVIK Data/ Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2035 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-09T304-2035-Sandvik 40END
CCMT 09T304 MM 2220 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MM2220-SANDVIK ISO-Code: CCMT09T304 Grade: 2220 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: MM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-2220-Sandvik 40END
CCMT 09T304 MMC 2025 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304MMC2025-SANDVIK Facts and Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 2025 Chip Breaker: MMC with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T304-2025-Sandvik 40END
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet edge, precise geometry and ISO compatibility for consistent finishing results in turning operations; order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. CCMT 09T304 NS9530 — Tungaloy turning insert (cermet finishing for steel) The CCMT 09T304 NS9530 is an ISO‑standard rhombic turning insert engineered for finishing steel, offering a sharp cutting edge, low cutting forces and reliable performance in continuous cuts and small depths of cut. ISO rhombic insert CCMT 09T304 Uncoated cermet NS9530 for fine finishing Sharp edge and low cutting forces Cylindrical hole with single‑side countersink Consistent fine finishing with low cutting forces The NS9530 grade is an uncoated cermet designed specifically as a finishing grade for steel, delivering a sharp cutting edge that reduces cutting forces and improves surface quality. Cermet materials combine ceramic hardness with metallic toughness, which helps preserve edge geometry during continuous, low‑depth passes. The result is a high surface finish that often reduces downstream machining or polishing steps, supporting a lean production flow and improved cycle‑time efficiency. Secure clamping and geometry that supports repeatability The rhombic plate form and the cylindrical hole with single‑side countersink (40°–60°) ensure precise seating and reliable clamping in compatible holders. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; matching these ensures correct tool projection and repeatable cutting conditions. With a corner radius of 0.4 mm and a relief angle of 7°, the geometry favours stable chip flow and controlled cutting forces, which benefits both tool life and part tolerances. Application focus: finishing on external and internal turning Designed for external and internal turning, this insert excels in finishing passes and operations requiring minimal material removal per cut. The one‑sided chipbreaker supports smooth chip control during continuous cuts and small depths of cut, while the ISO‑standard outline simplifies inventory and tool selection for mixed‑machine shops. Selecting the NS9530 finishing grade helps achieve consistent surface quality on steel components where tight tolerances and good appearance are required. Practical advantages for workshop integration The insert’s nominal thickness of 3.97 mm, the 80° included angle and the standard CCMT designation allow integration into common turning systems without custom adapters. The uncoated cermet grade is tolerant of finishing speeds and promotes a fine edge profile, making it particularly suitable where surface integrity and minimal burr formation are priorities. Clear identification by ISO code and manufacturer SKU streamlines reordering and tool‑management processes. For tailored advice or to source the CCMT 09T304 NS9530 Tungaloy turning insert, contact Metav Werkzeuge for application recommendations and availability — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Manufacturer article number: 6997716 Manufacturer SKU: TUN6997716 SKU: 6997716-Tungaloy Model series: ISO‑Drehwendeschneidplatten WPL designation: CCMT09T304 Grade: NS9530 Numbers / core technical data Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Thickness: 3.97 mm Plate size: 09 Designs / special features Rhombic plate form (CCMT) Uncoated cermet cutting material (NS9530) Single‑side chipbreaker With cylindrical hole + single‑side countersink (40°–60°) ISO‑standard turning insert Intended for external and internal turning Suited to continuous cuts and small depths of cut FAQ Is this insert suitable for finishing steel components? Yes. The CCMT 09T304 NS9530 Tungaloy turning insert is a finishing grade for steel, where the uncoated cermet and sharp edge produce low cutting forces and improved surface finish. What geometry does the insert have and what does that mean for clamping? The insert uses a rhombic CCMT form with an 80° included angle, a 0.4 mm corner radius and a 7° relief; the cylindrical hole with a single‑side countersink ensures secure seating in compatible holders. Is the NS9530 grade coated? No. The NS9530 grade supplied with the CCMT 09T304 is uncoated cermet, optimised for fine finishing and sustained sharpness in continuous finishing cuts. Which turning operations are recommended for this insert? This insert is recommended for external and internal finishing operations, particularly continuous cuts and small depths of cut where surface integrity and low cutting forces are priorities. How is holder compatibility determined? Compatibility is determined by matching form, relief angle, tolerance class, fastening type, size and thickness; CCMT 09T304 NS9530 will seat correctly in holders designed for CCMT inserts when these parameters align. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 uncoated cermet cutting grade, a small 0.4 mm corner radius and ISO compatibility to achieve reliable, high-quality finishing in continuous turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for process advice. CCMT09T304 NS9530 Tungaloy turning insert — ISO rhombic format, uncoated cermet, 0.4 mm radius A CCMT09T304-format indexable turning insert by Tungaloy, designed for fine finishing in turning operations and compatibility with standard ISO toolholders. CCMT09T304 format for ISO toolholders NS9530 uncoated cermet grade for fine finishing 0.4 mm corner radius for precise profiles Cylindrical hole with single countersink 40°–60° Precision finishing for steels with low cutting forces The CCMT09T304 NS9530 insert is manufactured as an uncoated cermet grade optimised for finishing cuts where a fine surface finish and low cutting forces are priorities. The NS9530 composition delivers a sharp edge geometry, reduced built-up edge tendency and consistent edge integrity during continuous, light-depth passes. With a 0.4 mm corner radius, the insert supports precise profile control and predictable corner behaviour, which helps to maintain dimensional accuracy and reduces the need for secondary finishing. The result is a combination of improved surface quality and extended effective tool life in stable turning conditions. Secure clamping and ISO compatibility for consistent results Designed to the ISO indexable insert system, this rhombic-shaped insert features an 80° included angle and a 7° relief (clearance) angle. Compatibility with a holder is determined by the insert form, relief angle, tolerance class, method of attachment, size and thickness. The ISO conformity simplifies replacement and inventory management across a production facility. The cylindrical hole with a single countersink (40°–60°) ensures a reliable locating and clamping interface; when paired with a correctly specified external holder or boring bar and appropriate shim/fastening set, the assembly minimises vibration and contributes to reproducible cutting conditions. Chip control and application guidance for continuous turning This insert is supplied with a one-sided chipbreaker, intended for continuous cuts and small depths of cut typical of finishing operations. Select the chipbreaker and grade combination according to workpiece material and machining stability: the NS9530 finishing grade is particularly suitable for steel where a sharp cutting edge and low cutting forces are required. The insert’s geometry and single-sided chip control promote smooth chip flow and reduce intermittent loading on the cutting edge, which is beneficial in automated or lights-out production runs. For varied production requirements, pairing the insert with holders engineered for stiffness will enhance productivity and surface integrity. Discuss application specifics with Metav Werkzeuge to specify the right Tungaloy CCMT09T304 NS9530 inserts for precision finishing; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998427 SKU: 6998427-Tungaloy Manufacturer SKU: TUN6998427 ISO designation: CCMT09T304 Data Corner radius: 0.4 mm Included angle: 80° Relief (clearance) angle: 7° Plate thickness: 3.97 mm Plate size: 09 Special features Rhombic plate form (80°) Cylindrical hole with single countersink (40°–60°) One-sided chipbreaker Grade: NS9530 (uncoated cermet) Typical application: turning (external and internal) System build: ISO indexable plate, matching external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert suitable for? The NS9530 finishing grade is specified for machining steel and is provided as an uncoated cermet to deliver sharp-edge performance and good surface finish when the CCMT09T304 insert is used in turning operations. How does the 0.4 mm corner radius affect part quality? A 0.4 mm corner radius offers a balance between edge strength and profile precision; it helps achieve consistent corner geometry and a high-quality surface finish on turned components when light finishing passes are used. Is the CCMT09T304 compatible with standard ISO holders? Yes. The CCMT09T304 format conforms to ISO indexable insert standards; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness, so matching those parameters ensures secure clamping and repeatable performance. What type of chip control does the insert provide? The plate is supplied with a one-sided chipbreaker designed for continuous cutting and small depths of cut typical of finishing operations, promoting stable chip flow and reduced edge loading. Can this insert be used for internal turning? Yes. The geometry and chip control of the CCMT09T304 make it suitable for both external and internal turning applications when mounted in an appropriate boring bar or holder that provides sufficient rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compliance, a NS9530 uncoated cermet grade optimised for finishing, and robust geometry for repeatable clamping and superior surface quality; order the CCMT09T304 NS9530 Tungaloy insert via Metav Werkzeuge or request specialist advice from the consultants at Metav Werkzeuge for selection support. CCMT09T304 NS9530 Tungaloy insert for turning — uncoated cermet finishing, 0.4 mm radius CCMT09T304 is an ISO‑standard rhombic indexable insert developed for external and internal turning, designed to deliver fine surface finishes in steel finishing applications ISO rhombic insert CCMT09T304, with 0.4 mm radius Uncoated cermet grade NS9530 for finishing 7° clearance angle for low cutting forces Cylindrical hole with 40°–60° countersink High‑quality finishing for steel with consistent results The CCMT09T304 insert is tailored for finishing operations on steel where a sharp cutting edge and stable cutting conditions are decisive. The uncoated cermet grade NS9530 provides a sharp edge that reduces ploughing and generates low cutting forces, which in turn supports improved dimensional consistency and a high surface finish. Because the grade is optimised for continuous cuts and small depths of cut, the insert helps maintain process stability during extended finishing passes, reducing rework and improving throughput in precision turning cells. Geometry and clamping that increase process reliability Compatibility with a toolholder is governed by form, clearance, tolerance class, clamping method, size and plate thickness. This indexable plate features a rhombic shape with a 0.4 mm corner radius, a 7° clearance and a plate thickness of 3.97 mm, while the cylindrical hole with single‑sided countersink (40°–60°) ensures secure mechanical retention. These dimensional attributes yield repeatable positioning and help avoid micro‑movement at the cutting edge, which is essential for achieving consistent parts in serial production. Clear geometric definition also simplifies holder selection and minimises setup time. Process benefits, chip control and economic efficiency With a one‑sided chipbreaker adapted for finishing, the insert supports predictable chip formation and evacuation in common turning setups. The combination of cermet chemistry and finely honed cutting geometry promotes longer edge life under finishing conditions, contributing to lower tool‑change frequency and reduced downtime. Improved surface quality and reduced cutting forces translate into shorter downstream processing and a favourable cost‑in‑use ratio. For workshops pursuing reliable, repeatable finishing on steel components, this insert offers a pragmatic balance between precision and productivity. Contact Metav Werkzeuge to source the Tungaloy CCMT09T304 (SKU: TUN6998431) for precision finishing work, or request tailored selection support from their technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998431 Manufacturer SKU: TUN6998431 SKU: 6998431-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T304 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Hole style: cylindrical hole + countersink 40°–60° Grade: NS9530 Special features Uncoated cermet (NS9530) For finishing on steel; continuous cuts and small depths One‑sided chipbreaker Rhombic plate form Compatibility via form, clearance, tolerance class, clamping, size and thickness FAQ What turning operations is this insert suitable for? The CCMT09T304 NS9530 insert is intended for external and internal turning operations, especially finishing passes on steel where a sharp edge and low cutting forces are required. Is the insert coated? The insert is an uncoated cermet in grade NS9530, selected for its finishing performance and edge sharpness. How is holder compatibility determined? Compatibility depends on plate form, clearance angle, tolerance class, clamping method, plate size and thickness; the CCMT09T304 follows ISO dimensions to align with standard holders. What chip control can be expected with this insert? Equipped with a one‑sided chipbreaker, the insert promotes consistent chip formation during finishing cuts, aiding evacuation and surface integrity. What is the SKU and article number for ordering? Ordering references: Article number 6998431, Manufacturer SKU TUN6998431, and seller SKU 6998431‑Tungaloy; these identifiers assist with correct procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp, low-force cutting geometry and the fine-surface benefits of an uncoated cermet grade for consistent finishing results; order directly via Metav Werkzeuge or consult the technical team for process matching and availability. CCMT 09T304 NS9530 – ISO turning insert, uncoated cermet finishing (Tungaloy) CCMT 09T304 NS9530 is an ISO rhombic turning insert designed for finishing steel, providing a precise edge geometry and low cutting forces for continuous, fine-turning operations. ISO rhombic insert CCMT 80° geometry Uncoated cermet NS9530 for finishing Sharp edge for low cutting forces Suitable for continuous turning and fine cuts High-precision finishing for superior surface quality The insert delivers a measurable improvement in surface finish thanks to the uncoated cermet grade NS9530, which combines a sharp cutting geometry with stable wear behaviour. With a nose radius 0.4 mm and an 80° rhombic form, the geometry is optimised for small depths of cut and continuous cutting, producing consistent finishes while keeping cutting forces low. The result is reduced need for secondary operations and a predictable part quality in serial production. Increased process stability through controlled chip formation Designed as a finishing grade, the substrate and edge preparation promote stable chip formation and reduced micro-chipping. The sharp cutting edge lowers the force transmitted to the workpiece, which decreases vibration and supports repeatable results across batches. Compatibility with the machining system is governed by holder form, clearance, tolerance class, fastening method, size and thickness, ensuring that the insert integrates smoothly into existing tooling setups and contributes to higher throughput with fewer interruptions. Simple mechanical integration and predictable clamping The ISO system format simplifies replacement and setup: the insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening and positional repeatability. At a thickness of 3.97 mm and a clearance angle of 7°, the geometry supports stable clamping and precise tool-path control. The single-sided chipbreaker is tuned for finishing cuts, and the standardised form factor allows ready pairing with appropriate external holders or boring bars to achieve the intended cutting conditions with minimal adjustment. The CCMT 09T304 NS9530 insert thus supports efficient changeover and consistent process behaviour. For finishing operations that require dependable surface quality and low cutting loads, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability, technical advice and order handling Technical Data Article number: 6998422 Manufacturer SKU: TUN6998422 SKU: 6998422-Tungaloy Model series: ISO turning indexable inserts Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Insert angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide substrate Grade: uncoated cermet NS9530 Plate form: rhombic Chipbreaker: single-sided Application: turning With hole for screw fastening FAQ What applications is this insert best suited for? This insert is intended for finishing in turning operations; the NS9530 uncoated cermet grade on the CCMT 09T304 is optimised for continuous cuts and small depths of cut on steel. How does the NS9530 grade affect surface finish and tool life? The NS9530 uncoated cermet provides a sharp cutting edge that lowers cutting forces and supports superior surface finish while offering stable wear behaviour for predictable tool life with finishing feeds. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the CCMT 09T304 format conforms to ISO standards and fits matching CCMT external holders or boring bars. How is the insert secured and positioned in the tool? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for reliable screw clamping and positional repeatability in standard ISO clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet NS9530 and ISO compatibility to achieve consistent finishing results with minimal rework; order the insert directly via Metav Werkzeuge or consult the technical team for application support. CCMT09T304 NS9530 turning insert (finishing) by Tungaloy CCMT09T304 NS9530 is an ISO-format, rhombic indexable insert for turning, optimised for finishing steel components with low cutting forces and superior surface quality. Precision rhombic geometry, ISO size 09 Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Compatible with ISO turning holders Optimised finishing performance for steel components The CCMT09T304 NS9530 indexable insert is designed as a dedicated finishing grade for steel. The uncoated cermet composition of grade NS9530 provides a very sharp cutting edge and reduced built-up edge tendency, which produces a high surface finish in continuous cuts and small depths of cut. This results in fewer secondary operations and a more reliable production flow, delivering measurable improvements in throughput and part quality. Predictable geometry for consistent results and tool life The insert’s rhombic plate form and defined flank geometry give repeatable contact conditions and stable chip flow. A 0.4 mm corner radius combined with a 7° rake angle favours low cutting forces and reduced vibration, supporting consistent dimensional accuracy on external and internal turning. The reliable geometry helps to extend effective tool life and reduces variability between batches, aiding process control in series production. Secure mounting and straightforward integration The plate is supplied with a cylindrical hole and one-sided countersink (40°–60°) for secure clamping in ISO-compatible holders. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; this insert’s dimensions and hole style enable straightforward retrofitting into standard turning toolholders. The clear mechanical interface simplifies changeovers and minimises setup time in the workshop. Practical application advice for process reliability Use the single-sided chipbreaker and NS9530 grade for continuous finishing passes on steel where low feed and small depths are required. Select a holder and clamping set that match the plate’s ISO geometry and thickness to maintain process stability. For mixed or interrupted cuts, consider an alternative chipbreaker or a different grade; for stable finishing operations this insert delivers excellent surface quality and predictable performance rooted in Tungaloy’s material and manufacturing standards. For precision finishing on steel components, choose the Tungaloy CCMT09T304 NS9530 turning insert and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer article number: 6997713 SKU: 6997713-Tungaloy Manufacturer SKU: TUN6997713 Model series: ISO indexable turning inserts Label: CCMT09T304 NS9530 Tungaloy turning insert Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm ISO size: 09 Free clearance (rake) angle: 7° Wedge angle: 80° Special features Uncoated cermet grade NS9530 Rhombic plate form (CCMT) One-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning; finishing for steel Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The insert is optimised for finishing on steel; the NS9530 uncoated cermet grade gives a sharp edge and low cutting forces specifically suited to continuous finishing passes on steel components. Can the insert be used for internal turning? Yes. The rhombic geometry and ISO size allow use in appropriate internal and external turning holders when the holder matches the plate form, thickness and clamping arrangement. How is the insert clamped in the holder? The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°); secure clamping requires a matching ISO-compatible holder and correct underlay or clamp set according to the holder manufacturer’s guidance. How does the cermet grade affect surface finish? The uncoated cermet NS9530 presents a very sharp edge and low deformation at the cutting zone, which reduces cutting forces and helps deliver a superior surface finish on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet cutting edge, low cutting forces and ISO conformity for reliable finishing operations; order the CCMT09T304 NS9530 insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CCMT09T304 NS9530 Tungaloy turning insert — uncoated cermet, 0.4 mm nose radius CCMT09T304 NS9530 Tungaloy turning insert designed for finishing cuts in steel, suitable for both external and internal turning applications. Uncoated cermet grade NS9530 for fine finishing 0.4 mm nose radius for precise contouring 7° clearance angle reduces cutting forces Single-sided chipbreaker for continuous cuts High-quality finishing with uncoated cermet The insert’s uncoated cermet grade NS9530 delivers a sharp cutting edge tailored for finishing operations on steel, producing excellent surface quality with reduced tendency for built-up edge. Cermet combines the hardness of ceramic phases with the toughness of metallic binders, so the insert offers a consistently fine finish at small depths of cut and during continuous feeds. This results in fewer reworks and a measurable improvement in final part appearance compared with standard grades. Predictable chip control and stable machining Equipped with a single-sided chipbreaker, the design supports stable chip formation during continuous turning, which helps maintain process reliability and reduces the risk of workpiece damage. The chipbreaker geometry is selected to match the intended material and cutting conditions, enabling efficient evacuation of chips and lowering the likelihood of vibration. For operations where steady, repeatable cuts are essential, this insert provides controlled removal and consistent results over production runs. ISO compatibility and precise geometry for accurate set-up As an ISO-normed insert, fit is determined by form, clearance angle (7°), tolerance class, clamping method, size and thickness. The rhombic plate with an 80° included angle and a 0.4 mm nose radius offers fine contouring capability, while the 3.97 mm plate thickness ensures secure clamping in standard holders. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure fastening. These measurable specifications make it straightforward to select an appropriate external holder or boring bar and to verify compatibility during set-up. Practical benefits for workshop efficiency Integration into a complete system — insert, suitable external holder or boring bar, shim/clamp set and replacement screws — ensures straightforward replacement and minimal downtime. The combination of low cutting forces and a sharp edge reduces power draw and tool wear in finishing passes, contributing to longer tool life and stable surface finish across batches. For customers seeking predictable finishing performance in steel turning, the grade’s balance of edge quality and process stability supports higher throughput and dependable part quality. For precision finishing with the NS9530 grade, contact Metav Werkzeuge for a compatibility check, stock information and tailored recommendations to match holder geometry and machining conditions. Technical data Article number: 6735900 Manufacturer SKU: TUN6735900 SKU: 6735900-Tungaloy ISO designation: CCMT09T304 Label: CCMT09T304 NS9530 Tungaloy insert Facts Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Plate thickness: 3.97 mm Size: 09 Countersink angle: 40°–60° Special features Material: cemented carbide Cutting material: uncoated cermet NS9530 Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Application: turning Model series: ISO turning indexable inserts FAQ What is the primary application for this insert? This insert is intended for finishing in external and internal turning operations on steel, where a fine surface finish and low cutting forces are required. Why choose the NS9530 grade over conventional carbide? The NS9530 cermet grade provides a sharper, more wear-resistant edge for finishing passes, improving surface quality and reducing built-up edge compared with many standard carbides. How is holder compatibility determined? Compatibility depends on insert form, clearance angle (7°), tolerance class, clamping method, size and thickness; the ISO designation CCMT09T304 facilitates matching to suitable external holders or boring bars. Does the insert support continuous cutting conditions? Yes, the single-sided chipbreaker and the uncoated cermet edge are optimised for continuous cuts and small depths of cut, offering stable chip control and repeatable results. What mounting features does the insert have? The insert includes a cylindrical hole with a one-sided countersink (40°–60°) for secure fastening; the plate thickness of 3.97 mm and rhombic form ensure reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance and easy compatibility with ISO holders: the uncoated NS9530 cermet grade delivers low cutting forces and excellent surface quality on Stahl, while the CCMT geometry and 0.4 mm corner radius enable reliable, consistent finishing. Order the insert directly via Metav Werkzeuge or ask the consultants for application recommendations. CCMT09T304 NS9530 Tungaloy indexable insert for turning — uncoated cermet, 7° clearance The CCMT09T304 NS9530 is an ISO rhombic turning insert designed for finishing operations on Stahl, offering a sharp cutting edge and stable performance in continuous cut conditions. Uncoated NS9530 cermet for excellent surface finish Rhombic CCMT geometry with 80° cutting edge 7° clearance angle for low cutting forces 0.4 mm corner radius for precise finishing High-quality finishing with low cutting forces The uncoated NS9530 cermet grade is formulated for finishing on Stahl, providing a sharp cutting edge and reduced cutting resistance that together improve surface integrity. In continuous cutting conditions and with small depths of cut the material combination yields consistent dimensional results and low burr formation. The insert’s geometry is optimised for tight tolerances and superior surface quality, making it particularly suitable where a fine finish is the primary requirement. Reliable fit and clear mounting parameters Designed to the ISO CCMT specification, the insert’s compatibility with holders depends on form, clearance, tolerance class, fixing method, size and thickness. The rhombic shape and an 80° approach give versatility for both external and internal turning in common ISO holder systems. The plate thickness of 3.97 mm and the cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and repeatable seating, reducing downtime from repositioning and improving process stability. Consistent process results and application guidance A 0.4 mm corner radius supports precision finishing without compromising edge life in fine-feed operations, while the 7° clearance angle lowers cutting forces and minimises rubbing. As a finishing grade, the insert is best matched with small depths of cut and steady feed to exploit the cermet’s strengths: high surface quality and low cutting temperatures. Select the single-sided chipbreaker and grade combination according to the workpiece Stahl grade and the machine’s rigidity to achieve optimal outcomes. Practical advantages and expected outcomes in production Using this CCMT insert reduces the need for secondary finishing in many standard turning tasks, as the material-grade pairing minimises common defects and produces uniform surfaces. The combination of ISO standard geometry, robust clamping interface and a finishing-oriented cermet supports efficient batch production where repeatability and surface integrity matter. For specialised materials or unusual alloys, a brief application review with technical advisors is recommended to confirm cutting data and holder choice. For tailored machining advice on the CCMT09T304 NS9530 insert and to arrange supply through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt application support and delivery coordination Technical data Article number: 6998616 SKU: 6998616-Tungaloy Manufacturer SKU: TUN6998616 ISO designation: CCMT09T304 Grade: NS9530 Manufacturer: Tungaloy Facts Shape: rhombic (CCMT) Size: 09 Thickness: 3.97 mm Clearance angle: 7° Approach angle: 80° Corner radius: 0.4 mm Special features Uncoated cermet cutting material Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for finishing cuts and continuous cutting Intended application: external and internal turning FAQ What machining tasks suit this insert best? The CCMT09T304 NS9530 insert is optimised for finishing operations on Stahl, especially continuous cuts and small depths of cut where a high-quality surface is required. Which holders are compatible with the insert? Compatibility depends on holder form, clearance, tolerance class, fixing method, size and thickness; ISO CCMT holders and matching clamping kits are suitable for this insert. How does the NS9530 grade affect tool life and surface finish? The NS9530 cermet provides a sharp cutting edge and lower cutting forces, which improves surface finish and reduces the tendency for built-up edge in finishing applications. Is the insert suited for roughing operations? As a finishing-grade cermet, the CCMT09T304 NS9530 is not intended for heavy roughing; it is best applied where precision and surface quality are priorities. What are the key mounting dimensions to check before use? Verify the plate thickness (3.97 mm), size (09), corner radius (0.4 mm), and the cylindrical hole with countersink to ensure correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a NS9530 cermet finishing grade and a 0.4 mm corner radius for consistently high surface quality in turning operations; order the insert via Metav Werkzeuge or consult our specialists for application support. CCMT09T304 NS9530 Tungaloy insert for turning — ISO CCMT 09T304, finishing grade The CCMT09T304 NS9530 Tungaloy insert is an ISO‑standard rhombic turning insert designed for precision external and internal turning, offering a low‑force, fine‑finishing solution for steel applications. ISO CCMT shape, size 09 insert NS9530 cermet for fine finishing 7° clearance angle for low cutting forces 0.4 mm corner radius for fine surface finish Precise ISO compatibility for reliable toolholding and process control The ISO designation and rhombic geometry ensure predictable fitment in standard CCMT holders and boring bars, giving a consistent mounting baseline. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness, so the CCMT format provides straightforward interchangeability in established tool systems. This predictability reduces setup time and simplifies inventory management, supporting smoother production flows and fewer tool changes per shift. Finishing performance from the NS9530 uncoated cermet grade The uncoated NS9530 cermet is a finishing grade formulated for steels, delivering a sharp cutting edge with low cutting forces and excellent surface quality during continuous cuts and small depth‑of‑cut operations. The combination of a 0.4 mm corner radius and a 7° clearance angle helps to reduce built‑up edge and minimise vibration at the cutting zone, resulting in improved surface integrity and less downstream polishing. For applications requiring repeatable, high‑quality finishes, this grade provides a clear efficiency advantage. Practical application advice and measurable benefits Designed for both external and internal turning, the insert features a single‑sided chipbreaker and a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping. Selecting the appropriate chipbreaker and the NS9530 grade according to workpiece material and machining stability enables longer uninterrupted cutting, better process stability and lower scrap rates. The standardised geometry and finishing focus minimise secondary operations and can reduce overall cycle time for precision components. For precision finishing in steel, request the Tungaloy CCMT09T304 NS9530 insert from Metav Werkzeuge or contact Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6789574 SKU: 6789574-Tungaloy Manufacturer SKU: TUN6789574 Model series: ISO turning inserts Article designation: CCMT09T304 NS9530 Tungaloy insert Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features ISO rhombic plate Uncoated cermet grade NS9530 Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) For external and internal turning Compatible with standard CCMT holders FAQ What materials is this insert intended for? The CCMT09T304 NS9530 insert is a finishing grade designed primarily for steel; the NS9530 cermet provides a sharp edge and low cutting forces for continuous cuts. Is the CCMT09T304 compatible with standard CCMT holders? Yes, the ISO CCMT format and standard dimensions ensure compatibility with holders specified for CCMT‑09 inserts when form, size and thickness match. What surface finish can be expected with this grade? Using the NS9530 cermet and the 0.4 mm corner radius typically yields improved surface integrity and reduced need for secondary finishing on steel components. How is the insert clamped and what is the hole style? The insert features a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping in conventional CCMT toolholders. Which chipbreaker should be selected for this insert? A chipbreaker matching the material, cut depth and machining stability is recommended; the CCMT09T304 is supplied with a single‑sided chipbreaker suited for finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet NS9530 grade, ISO rhombic CCMT geometry and a 0.4 mm corner radius for reliable finishing of steel; ideal where low cutting forces and high surface quality are required. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T304 NS9530 Tungaloy turning insert — ISO CCMT finishing grade for turning A CCMT09T304 NS9530 ISO turning insert engineered for finishing steel with a sharp cutting edge, low cutting forces and excellent surface quality. Uncoated cermet NS9530 for superior surface finish 0.4 mm corner radius for precise machining ISO rhombic CCMT form with 7° clearance angle Cylindrical hole with 40°–60° countersink for fastening Precision finishing where surface quality matters The combination of uncoated cermet NS9530 and the ISO CCMT geometry delivers a finishing solution optimised for steels that require a sharp cutting edge and low cutting forces. The fine grade is designed for continuous cuts and small depths of cut, enabling a consistent high surface finish while limiting tool-induced vibration. In practical terms, users can expect improved first-pass results in external and internal turning operations where finish and dimensional accuracy are priorities. Reliable fit and secure clamping for consistent performance Compatibility of the insert with the toolholder is determined by geometry, tolerance class, fastener style, size and thickness. The rhombic plate form, 7° clearance angle and cylindrical hole with single-sided countersink (40°–60°) ensure repeatable seating and straightforward clamping. The plate thickness of 3.97 mm and size 09 conform to ISO specifications, making replacement and inventory management straightforward for ISO-compliant tool systems. Operational benefits in routine turning tasks A 0.4 mm corner radius provides a balance between edge strength and the ability to achieve fine surface finishes on steel components. The single-sided chipbreaker supports controlled chip formation in finishing cuts, reducing the risk of surface defects and secondary operations. The reduced cutting forces associated with this grade also help to minimise induced chatter on smaller overhangs, contributing to more efficient cycle times and lower scrap rates in stable machining setups. Practical selection and system considerations Choose a matching chipbreaker and holder according to workpiece material, machining stability and depth of cut; the single-sided chipbreaker suits finishing passes on steel. The typical system comprises the ISO turning insert, a compatible external holder or boring bar, a backing/clamping set and replacement screws. For bespoke applications or uncertainty on holder compatibility, guidance is available to ensure the insert and tooling system are optimised for the desired finish and productivity. For precision finishing with Tungaloy's NS9530 cermet, contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6789569 SKU: 6789569-Tungaloy Manufacturer SKU: TUN6789569 Model series: ISO turning inserts Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Countersink: 40°–60° Special features Material: cemented carbide Grade/coating: uncoated cermet NS9530 Plate shape: rhombic (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole with single-sided countersink Application: Turning (external and internal) Typical use: finishing steel, continuous cuts, small depths of cut FAQ What materials is this insert suitable for? The insert is specified as a finishing grade for steel; the NS9530 uncoated cermet is optimised for producing high surface quality in continuous cutting conditions. Which ISO designation and size does it use? This cutting insert is ISO designated CCMT09T304 (size 09) and follows the ISO rhombic CCMT form factor for compatibility with standard holders. What fastening style is required for the insert? The plate features a cylindrical hole with a single-sided countersink (40°–60°) and is clamped in holders designed for CCMT plates with matching hole and tolerance classes. Is the insert appropriate for internal as well as external turning? Yes; the geometry and grade are suitable for both external and internal finishing passes when paired with the correct boring bar or holder and appropriate machining parameters. How does the NS9530 grade affect cutting behaviour? The NS9530 cermet grade provides a sharp cutting edge, low cutting forces and strong surface finish performance, particularly advantageous for finishing cuts and small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade insert that combines a sharp cutting edge, low cutting forces and consistent ISO compatibility for reliable turning operations; order this insert via Metav Werkzeuge or consult their specialists for holder matching and process planning. CCMT09T304 NS9530 turning insert by Tungaloy — uncoated cermet, finishing grade CCMT09T304 NS9530 is an ISO rhombic turning insert designed for finishing steel in continuous cuts and small depth-of-cut operations Uncoated cermet for sharp cutting edge Optimised for continuous cuts and small depths Rhombic CCMT form, 7° clearance angle Compatible with ISO turning toolholders (with hole) Consistent finishing quality with reduced cutting forces The uncoated cermet composition and the NS9530 grade deliver a notably sharp cutting edge, producing superior surface quality on steel components. Cermet combines ceramic and metallic phases to offer hardness and wear resistance while maintaining brittle fracture control; in practice this means lower built-up edge formation and more stable finishes during continuous turning. For manufacturers seeking fewer secondary finishing steps, the reduced cutting forces translate into less spindle load and steadier surface results. Predictable fit and geometry for straightforward holder selection The rhombic CCMT form and ISO designation ensure compatibility across standard turning toolholders, provided form, clearance angle, tolerance class, fastening method, size and thickness align. The insert features a 7° clearance angle, an included angle of 80°, and a 0.4 mm corner radius, all of which influence cutting contact and strength. The plate thickness of 3.97 mm and the cylindrical hole with a one-sided countersink (40°–60°) support secure clamping in common clamping sets and facilitate straightforward replacement without altering tool geometry. Operational advantages that streamline production With a one-sided chipbreaker design and suitability for small ap cuts, this grade supports steady chip formation under continuous-cut conditions, reducing vibration and the risk of surface irregularities. The combination of a sharp edge and low cutting resistance shortens cycle times on finishing passes and reduces the need for manual rework. For setups where machine stability is moderate, selecting this finishing-grade insert can improve throughput while preserving dimensional accuracy. Practical guidance for integration into machining cells The system typically comprises the ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. When integrating the insert into a tool assembly, ensure the holder matches the CCMT size and the countersink profile for correct seating. The NS9530 grade is intended primarily for steel finishing; for interrupted cuts or heavier roughing conditions a different grade or geometry should be chosen. Regular inspection of the cutting edge and adherence to recommended feeds and speeds for finishing will extend life and maintain surface integrity. For tailored advice on Tungaloy finishing inserts and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss applications and order options Technical data Article number: 6998436 Manufacturer SKU: TUN6998436 Metav SKU: 6998436-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCMT09T304 NS9530 Facts Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Cutting material: uncoated cermet Grade: NS9530 Application: Turning Typical system: ISO insert + external holder/boring bar + shim/clamp set + replacement screws FAQ What materials is this insert suitable for? The CCMT09T304 NS9530 is formulated as a finishing grade for steel, providing high surface quality when used on steels under continuous cutting conditions. Is the insert coated? No, the CCMT09T304 NS9530 is an uncoated cermet insert; the absence of coating helps preserve the sharp cutting edge required for superior finishing. Which toolholders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for CCMT-size ISO rhombic inserts with a matching countersink will accept this insert. What corner radius does the insert have? The insert has a 0.4 mm corner radius, suitable for achieving fine surface finishes while maintaining edge strength for light finishing cuts. Can this insert be used for interrupted cuts or roughing? This grade is intended for finishing and continuous cuts; for interrupted or heavy roughing operations, a more robust grade or different geometry is recommended. What must be checked when replacing worn inserts? Ensure correct seating on the shim/clamp set, that the countersink profiles match, and that the clamp screw torque follows the holder manufacturer’s specification to maintain geometry and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T304 PF 1515 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304PF1515-SANDVIK ISO-Code: CCMT09T304 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: PF Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-1515-Sandvik 40END
CCMT 09T304 PF 4315 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Detail specifications CCMT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304PF4315-SANDVIK Facts & Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-09T304-4315-Sandvik 40END
CCMT 09T304 PF 4415 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304PF4415-SANDVIK Dataand Figures: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4415 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-4415-Sandvik 40END
CCMT 09T304 PF 4425 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T304PF4425-SANDVIK Figures for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T304-4425-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com