Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T6215 carbide grade and precise geometry for efficient stainless steel turning; the insert delivers stable chip control and long tool life under stable to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. CCMT09T308 T6215 rhombic turning insert by Tungaloy — CVD-coated carbide for stainless steel The CCMT09T308 T6215 is a CVD-coated indexable insert designed for turning applications on stainless steel under stable to slightly interrupted machining conditions, compatible with ISO holders matching form, clearance and tolerance. CCMT09T308 rhombic insert, 80° geometry CVD-coated carbide grade T6215 for stainless steel 0.8 mm nose radius for fine surface finishes Cylindrical hole with single-side chipbreaker Consistent high-performance machining of stainless steel The combination of a CVD-coated surface and the T6215 carbide matrix yields a wear-resistant cutting edge optimised for the demands of machining stainless steel. This treatment improves thermal and abrasive resistance, which in turn prolongs edge life and reduces the frequency of insert changes. For production environments where uptime and predictable tool life matter, the coating and substrate pairing support higher cutting parameters while maintaining consistent results. The ISO-designated insert is aimed at external and internal turning tasks, where stable chip formation and controlled wear are priorities. Geometry engineered for repeatable accuracy and surface quality Featuring an 80° rhombic shape with a 0.8 mm nose radius and a 7° clearance angle, the insert provides a balanced contact zone that supports dimensional stability and surface finish. The 3.97 mm plate thickness adds stiffness in the clamp, reducing vibration in medium-duty turning operations. The cylindrical hole with one-sided countersink (40°–60°) ensures secure fastening in the pocket and consistent seat position, which is essential for repeatable tool offsets and reliable toolpath programming. These geometric details translate into fewer regrinds and more predictable cycle times. Durable chip control and process efficiency A single-sided chipbreaker matched to the grade helps evacuate chips effectively and reduces the risk of built-up edge when machining stainless steel. Under stable to slightly interrupted cutting, this design promotes steady chip flow and lowers the chance of surface damage, so cycle times remain efficient and downstream processes benefit from improved workpiece quality. When considered against throughput, the robust edge preparation and coating deliver a favourable tool-life-to-cost ratio, helping to lower overall machining costs in batch production and intermittent series. System compatibility and straightforward handling The insert integrates into standard ISO turning systems: an insert body, matched external holder or boring bar, backing/clip set and replacement screws form the complete assembly. Compatibility depends on insert form, clearance, tolerance class, fixing method, size and thickness; verifying these parameters with the chosen holder ensures correct seating and safe clamping. Spare screws and underplates should match the insert hole and countersink style for reliable mounting. For applications requiring adaptation—such as light interruptions or mixed material batches—adjusting cutting data and selecting the appropriate chipbreaker variant will maintain process security. For demanding stainless steel turning, contact Metav Werkzeuge to order the Tungaloy CCMT09T308 T6215 insert and request personalised application advice Technical Data Article number: 6945219 Manufacturer SKU: TUN6945219 SKU: 6945219-Tungaloy Model series: ISO indexable turning inserts Material: carbide Manufacturer: Tungaloy Facts Geometry: 80° Nose radius: 0.8 mm Clearance (relief) angle: 7° Plate thickness: 3.97 mm Size: 09 Special features ISO designation: CCMT09T308 Coating: CVD-coated Grade: T6215 Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning of stainless steel Intended system components: insert, suitable external holder or boring bar, backing/klemmsatz, replacement screws FAQ What materials is this insert intended for? The CCMT09T308 T6215 insert is formulated for machining stainless steel, offering enhanced wear resistance and chip control suited to that material class. Is the insert compatible with standard ISO holders? Compatibility is determined by insert form, clearance angle, tolerance class, fixing and thickness; the CCMT09T308 is ISO dimensioned and fits holders designed for CCMT inserts when those parameters match. What benefits does the T6215 grade provide? The T6215 CVD-coated carbide grade delivers good wear resistance and stable cutting behaviour for turning operations on stainless steel under stable to slightly interrupted conditions. How does the chipbreaker affect performance? The single-sided chipbreaker promotes consistent chip formation and evacuation, reducing built-up edge risk and improving surface quality in continuous turning. Which cutting data adjustments are recommended for stainless steel? When using the CCMT09T308 T6215 insert, moderate speeds and increased feed for thermal stability, together with appropriate coolant strategy, will typically yield the best compromise between productivity and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and ISO compatibility for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. CCMT 09T308 T6215 turning insert by Tungaloy — CVD-coated carbide, rhombic 80° form CCMT09T308 T6215 is a CVD-coated carbide turning insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 for wear resistance ISO rhombic CCMT form with 80° included angle Single-sided chipbreaker for consistent chip control Cylindrical hole with single-side countersink (40°–60°) Durable grade and productivity gains for stainless steel machining The T6215 grade is a CVD-coated carbide developed to deliver wear-resistant performance when turning stainless steel under steady or slightly interrupted conditions. The coating improves abrasive resistance and heat tolerance, which reduces flank wear and extends usable life; this leads to fewer indexings and lower tooling cost per component. Where consistent material removal rate and repeatable batch results are required, the combination of substrate and coating provides a predictable tool life that supports continuous production. ISO compatibility and secure mounting for predictable results Designed as an ISO CCMT09T308 insert, the geometry is rhombic with an 80° included angle and a 7° clearance, ensuring compatibility with standard CCMT holders when form, clearance, tolerance class, fastening, size and thickness match. The insert features a cylindrical hole with a single-side countersink (40°–60°) to suit common clamping systems. These mechanical details simplify integration into existing toolholders and minimise setup variability, contributing to stable cutting conditions and reproducible component quality. Chip control and surface quality with a single-sided chipbreaker The single-sided chipbreaker geometry is tailored to promote stable chip formation and evacuation in turning operations. By pairing the chipbreaker with the appropriate grade and cutting parameters, the tool supports improved surface finish and reduced risk of built-up edge when machining stainless steels. The controlled chip flow also reduces the likelihood of re-cutting, helping to protect the workpiece surface and preserve dimensional accuracy during longer cycles. Practical dimensions and mechanical strength for everyday use With a nominal size of 09, a plate thickness of 3.97 mm and a corner radius of 0.8 mm, the insert balances rigidity with cutting edge definition. The 0.8 mm corner radius offers a compromise between edge strength and surface finish capability, suitable for general turning tasks where durability and acceptable finish are required. Integration into a typical system—insert, compatible external holder or boring bar, shim/clamp set and replacement screws—ensures straightforward maintenance and fast index changes at the machine. Contact Metav Werkzeuge today for tailored advice on integrating the CCMT09T308 T6215 turning insert by Tungaloy into existing tool systems or to request a quote through Metav Werkzeuge Technical data Article number: 6876407 Manufacturer SKU: TUN6876407 SKU: 6876407-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: T6215, CVD-coated Application: turning Core data Size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief (clearance) angle: 7° Included angle: 80° Hole: cylindrical hole + single-side countersink (40°–60°) Special features Rhombic plate form (CCMT) Single-sided chipbreaker Grade T6215 for stainless steel machining CVD-coated carbide substrate Suitable for external and internal turning Compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What workpieces is this insert best suited to? The CCMT09T308 T6215 insert is optimised for machining stainless steel under stable to slightly interrupted cutting conditions, offering good wear resistance and chip control for typical turning applications. How does the T6215 grade improve process reliability? The T6215 CVD-coated carbide provides improved abrasive resistance and thermal stability, which extends tool life and supports consistent batch-to-batch performance when used with the correct cutting data. Which holder features ensure correct compatibility? Compatibility requires a matching CCMT holder regarding form, clearance angle, tolerance class, fastening method, size and plate thickness; the rhombic geometry and hole style are standard for CCMT applications. What is the effect of the 0.8 mm corner radius on machining? A 0.8 mm corner radius increases edge strength, reduces chipping risk and contributes to stable cutting forces, while still allowing acceptable surface finish for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of reliable tool life, consistent chip control and ISO compatibility for efficient stainless-steel turning operations; order the CCMT09T308 T6215 Tungaloy turning insert directly via Metav Werkzeuge or consult our technical team for application guidance. CCMT 09T308 T6215 — CCMT turning insert for Drehen by Tungaloy, 80° rhombic, 0.8 mm radius CCMT09T308 T6215 is an ISO rhombic turning insert engineered for productive external and internal turning in stainless steels under stable to lightly interrupted conditions CVD-coated carbide grade T6215 Designed for machining stainless steel Rhombic 80° geometry, 0.8 mm nose radius Single-sided chipbreaker, with mounting hole Productive turning performance for stainless steels The CVD-coated carbide composition and the T6215 grade deliver a balanced combination of wear resistance and edge stability that suits continuous and slightly interrupted turning. The 80° rhombic geometry with a 0.8 mm nose radius provides a robust cutting edge that reduces the risk of chipping while maintaining the capacity for controlled material removal. This results in consistent cycle times and reliable component quality, especially when machining corrosion‑resistant alloys and other challenging stainless-steel grades. Secure clamping and ISO compatibility for quick changeovers Designed as an ISO turning plate, the insert fits into standard holders when form, relief angle, tolerance class, fastening method, size and thickness match. The plate’s thickness of 3.97 mm, the cylindrical hole with one-sided countersink (40°–60°) and the defined geometry ensure repeatable seating and safe clamping. The single-sided chipbreaker supports predictable chip formation, simplifying process setup and minimising downtime during index changes — a practical advantage in batch production and mixed-lot turning. Practical handling and operational benefits The rhombic shape and central bore allow flexibility for both external and internal operations with straightforward indexation. The single-sided chipbreaker helps to control chip flow in stainless-steel turning, improving surface finish and reducing tool marks. Because the insert is supplied as an ISO-compatible plate, inventory management and tooling standardisation are simplified, supporting efficient workshop logistics and reduced set-up complexity for production teams. Application guidance and process optimisation For best results with this turning plate, pair the geometry and T6215 grade with a holder that matches the plate’s relief angle and tolerance class. Select cutting parameters appropriate for stainless steels — moderate cutting speeds with stable feeds and adequate coolant — to exploit the insert’s wear-resistant coating while avoiding thermal work hardening. The combination of predictable chip control and a robust edge provides an attractive cost‑per‑part balance in many industrial turning applications. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy CCMT09T308 T6215 insert and to secure the right inventory and delivery options for immediate production needs Technical data Article number: 6876260 Manufacturer SKU: TUN6876260 Seller SKU: 6876260-Tungaloy Model series: ISO turning inserts Facts Nose radius: 0.8 mm Plate thickness: 3.97 mm Included angle: 80° Free relief angle: 7° Plate size: 09 Special features CVD-coated carbide, grade T6215 Single-sided chipbreaker Rhombic plate form, ISO CCMT09T308 designation Cylindrical hole with one-sided countersink (40°–60°) Intended application: turning, external and internal Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Suitable for machining stainless steel under stable to lightly interrupted conditions FAQ What material range is suitable for this insert? The CCMT09T308 T6215 turning insert by Tungaloy is optimised for stainless steel machining and performs well under stable to lightly interrupted cutting conditions. Which holders are compatible with this ISO plate? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the CCMT09T308 designation follows ISO dimensions for rhombic turning inserts. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide offers enhanced wear resistance and edge stability, which contributes to longer tool life and consistent part quality in stainless-steel turning. Is the insert suitable for internal turning as well as external turning? Yes, the rhombic geometry and central bore design allow the insert to be used for both external and internal turning operations when installed in the appropriate holder (SKU: 6876260-Tungaloy). What chip control can be expected from this plate? The single-sided chipbreaker provides predictable chip formation for improved surface finish and safer chip evacuation during stainless-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD‑coated T6215 grade and the CCMT09T308 geometry deliver consistent edge life and good surface finish when turning rostfreier Stahl under stable to mildly interrupted conditions; reliable clamping and ISO conformity ensure compatibility with standard holders. Order the CCMT09T308 T6215 turning insert directly via Metav Werkzeuge or consult the Metav team for application advice. CCMT 09T308 T6215 Turning Insert — Tungaloy CVD‑coated carbide for turning CCMT09T308 T6215 Tungaloy turning insert is an ISO‑standard rhombic indexable insert designed for external and internal turning of rostfreier Stahl where stable or slightly interrupted cuts are expected CVD‑coated carbide for high wear resistance ISO rhombic CCMT 09 geometry, 7° clearance 0.8 mm corner radius for versatile turning Cylindrical hole with single‑side countersink Long‑lasting performance for rostfreier Stahl machining The CVD‑coated T6215 grade brings a wear‑resistant surface that extends tool life and maintains cutting edge integrity during continuous production runs. Because the grade is formulated specifically for machining rostfreier Stahl, the wear behaviour and thermal stability are balanced to reduce flank and crater wear under steady to mildly interrupted cutting conditions. This results in fewer insert changes, more predictable tool life and a consistently improved surface finish on turned components. Geometry and fit for dependable toolholding The rhombic CCMT09T308 geometry with an included angle of 80° and a 7° clearance supports a stable cutting edge and efficient chip flow in both external and internal turning operations. The 0.8 mm corner radius provides a compromise between edge strength and dimensional control, suitable for a wide range of turning passes. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping in compatible holders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness, so matching the insert to the holder is essential for repeatable results. Practical advantages and recommended use With a single‑sided chipbreaker and a thickness of 3.97 mm, this ISO insert is part of a system comprising the indexable plate, an outer holder or boring bar, underlay/clamp set and replacement screws — components that together determine rigidity and process stability. The insert is best applied where steady cutting conditions are achievable; selecting the correct chipbreaker and grade for the workpiece material and machining stability will reduce vibration, improve tool life and enhance surface quality. For technical queries on cutting data, holder selection or process setup, Metav Werkzeuge provides application support to match the insert to production needs. For optimised rostfreier Stahl turning with the Tungaloy T6215 grade, contact Metav Werkzeuge for tailored application advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6876211 SKU (manufacturer): TUN6876211 SKU: 6876211-Tungaloy ISO designation: 09T308 Insert designation: CCMT09T308 Facts Insert size: 09 Included angle: 80° Clearance (relief) angle: 7° Corner radius: 0.8 mm Thickness: 3.97 mm Special features CVD‑coated carbide (T6215) Single‑sided chipbreaker Rhombic ISO indexable insert With cylindrical hole + single‑side countersink (40°–60°) Intended application: turning rostfreier Stahl System: insert, outer holder/boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suitable for? The CCMT09T308 T6215 turning insert is specified for machining rostfreier Stahl and performs best under stable to mildly interrupted cutting conditions. Which holder types are compatible with the CCMT09T308 geometry? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the CCMT09T308 fits standard ISO‑compatible holders and boring bars designed for rhombic CCMT inserts. What does the T6215 designation mean for performance? T6215 denotes a CVD‑coated carbide grade tuned for wear resistance and stable cutting when turning rostfreier Stahl, offering extended edge life in continuous operations. How does the 0.8 mm corner radius affect machining results? A 0.8 mm radius increases edge strength compared with finer radii, reducing chipping risk while still allowing good dimensional control in general turning passes. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6876211 and the product SKU is 6876211‑Tungaloy (manufacturer SKU TUN6876211). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade designed for stainless‑steel turning, the precise 0.8 mm nose radius for fine finishes, and a stable rhombic 80° geometry that fits ISO toolholders; order directly via Metav Werkzeuge or ask the consultants for application support. CCMT09T308 T6215 — Tungaloy indexable turning insert, CVD‑coated carbide, 0.8 mm radius A CCMT09T308 T6215 indexable insert engineered for stable stainless‑steel turning and fine finishing across a range of production setups CVD‑coated carbide for stainless‑steel turning Precision 0.8 mm nose radius for fine finishes Rhombic 80° geometry with 7° clearance Cylindrical hole with 40°–60° countersink Consistent metal‑cutting performance for stainless steel The combination of a CVD‑coated surface and a wear‑resistant carbide substrate in grade T6215 provides a balance between tool life and edge strength when machining stainless steel under stable or mildly interrupted conditions. The coating reduces adhesive wear and enhances thermal resistance; this means longer intervals between indexings and fewer unscheduled tool changes. For production environments seeking predictable cycle times, the coated substrate offers measurable improvements in process stability and surface quality compared with uncoated alternatives. Geometry and edge form that support accurate finishing The rhombic 80° geometry and 0.8 mm nose radius concentrate the cutting forces into a controlled contact area, improving finish and dimensional repeatability on shafting and form features. The 7° clearance angle reduces rubbing on shoulders and minimises built‑up edge formation during low‑to‑medium cutting speeds. The single‑sided chipbreaker helps to direct chips away from the cutting zone, lowering the risk of re‑cutting and easing evacuation in turning operations. These design elements translate into reduced rework and a more consistent surface finish. Compatibility, handling and shopfloor advantages ISO conformity of the insert means compatibility is determined by form, clearance, tolerance class, fixing method, size and thickness; matching the insert to a suitable external holder or boring bar ensures secure clamping and reliable results. The central cylindrical hole with a one‑side countersink (40°–60°) facilitates straightforward seating and repeatable clamping torque. The insert’s 3.97 mm thickness and standard 09 size allow straightforward replacement in common insert pockets, supporting rapid changeovers and minimal setup time for batch production. For challenging stainless‑steel turning tasks, contact Metav Werkzeuge to discuss the Tungaloy T6215 insert and request tailored cutting data or application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6945210 Manufacturer SKU: TUN6945210 Name: CCMT09T308 T6215 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.8 mm Approach angle: 80° Clearance angle: 7° Hole: with cylindrical hole Special features Rhombic insert shape Single‑sided chipbreaker Cylindrical hole + one‑side countersink (40°–60°) CVD‑coated carbide, grade T6215 Application: turning, suitable for stainless‑steel under stable to slightly interrupted cuts Compatible with ISO external holders and boring bars FAQ What materials is this insert best suited for? The CCMT09T308 T6215 insert is optimised for stainless‑steel machining; the CVD coating and carbide substrate provide wear resistance and thermal stability for turning operations in rostfreiem Stahl. Can this insert be used in interrupted cuts? Yes, the T6215 grade is formulated for stable to slightly interrupted conditions; however, for heavy interruptions or highly unstable set‑ups a more robust geometry or different grade should be considered. Which holders accept this insert? Holders that conform to the relevant ISO external turning insert standards and match the CCMT form, size 09, thickness 3.97 mm and 80° approach angle will accept this insert; ensure the pocket accommodates the cylindrical hole and countersink for secure clamping. Is the chipbreaker suitable for long, continuous lengths? The single‑sided chipbreaker directs chips reliably in many turning applications and aids evacuation during continuous cuts, improving process stability and surface consistency. What are the identifying numbers for ordering and traceability? The product is listed as CCMT09T308 T6215 Tungaloy indexable insert, article number 6945210 and manufacturer SKU TUN6945210. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a 0.8 mm corner radius for reliable wear resistance and consistent productivity; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. CCMT 09T308 T9215 Tungaloy insert — ISO turning insert for external and internal turning A CCMT09T308 T9215 ISO turning insert engineered for medium-steel turning with a single-sided chipbreaker and cylindrical hole for secure clamping CVD-coated carbide T9215 Optimised for medium steel turning Single-sided chipbreaker design 7° clearance; cylindrical hole & countersink Durable grade for increased production rates The CVD-coated carbide T9215 brings a balanced combination of wear resistance and fracture toughness, making it suitable for continuous to light interrupted cutting in medium-strength steels. The coating reduces flank wear and maintains cutting-edge integrity, which translates into longer tool life and fewer insert changes on the shop floor. As a result, machining cycles become more predictable and cycle-time improvements are realised without compromising component tolerances. This turning grade supports higher feed rates and contributes to measurable productivity gains in serial production. Precision geometry for consistent surface finish and secure clamping The rhombic CCMT geometry with an included angle of 80°, a corner radius of 0.8 mm, and 7° clearance is designed to deliver reliable edge strength and good contact conditions in both external and internal turning. The insert thickness of 3.97 mm and the cylindrical hole with single-side countersink (40°–60°) ensure positive clamping and repeatable seating in ISO-compatible holders. These features reduce vibration and help achieve a stable cutting zone, which supports improved surface quality and tighter dimensional control in finished parts. Practical selection and lifecycle advantages for production shops With a single-sided chipbreaker matched to the grade, this insert enables efficient chip formation for medium-steel applications and simplifies inventory management by focusing on a versatile grade. Compatibility depends on holder form, clearance, tolerance class, attachment method, size and thickness; the typical system includes an ISO turning holder, a shim or clamp set and replacement screws. The combination of stable chip control and a robust substrate results in longer tool life and consistent results, lowering total machining costs and downtime in manufacturing environments. Metav Werkzeuge consultants can support selection for specific workpiece materials and machining conditions. For high-productivity medium-steel turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for tailored selection and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777811 Manufacturer SKU: TUN6777811 Metav SKU: 6777811-Tungaloy Designation: CCMT09T308 T9215 Model series: ISO turning inserts Manufacturer: Tungaloy Specifications Size: 09 Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Hole: cylindrical hole + single-side countersink (40°–60°) Features / Applications Material: CVD-coated carbide (T9215) Chipbreaker: one-sided Typical use: external and internal turning Compatible with ISO turning holders, shim and clamp sets Suitable for medium steel, continuous to light interrupted cuts FAQ What materials is this insert best suited for? The CCMT09T308 T9215 Tungaloy insert is optimised for medium steels and performs well in continuous to light interrupted cutting conditions. Which chip control is provided with this grade? This insert features a single-sided chipbreaker designed to produce stable chip forms when machining medium-strength steel, contributing to reliable material evacuation. What are the key geometric details for holder compatibility? Size 09, 0.8 mm corner radius, 3.97 mm thickness and a cylindrical hole with single-side countersink are the primary dimensions to check against an ISO turning holder. Is this grade suitable for interrupted cuts? The T9215 grade combines wear resistance with fracture toughness and is suitable for continuous machining and light interruptions rather than heavy interrupted cuts. How does the insert support consistent surface finish? The combination of rhombic geometry, 7° clearance and secure clamping of the CCMT09T308 helps reduce vibration and maintain cutting-edge stability for better surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated T9215 grade with the rhombic CCMT geometry yields a cost-effective, high-productivity solution for medium-steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application matching. CCMT 09T308 T9215 indexable turning insert — rhombic CCMT, 0.8 mm corner radius (Tungaloy) CCMT09T308 T9215 is an ISO-standard indexable insert for external and internal turning, optimised for medium-steel machining and continuous to lightly interrupted cuts. CVD-coated carbide T9215 grade ISO rhombic CCMT 09 form 0.8 mm corner radius for versatile finishing Cylindrical hole with 40°–60° countersink High productivity through wear-resistant grade and coating The T9215 grade, a CVD-coated carbide, is specified for medium-steel applications where a balance of wear resistance and fracture toughness is required. This combination reduces flank and crater wear under steady cutting conditions and supports longer index intervals, which directly lowers tool-change frequency and increases machine uptime. The result is measurable productivity gains in batch production and serial turning, with fewer interruptions for insert replacement and consistent part-to-part quality. Consistent seating and repeatability with ISO geometry The rhombic CCMT form follows ISO-standard dimensions and ensures compatibility with common turning holders when the form, clearance angle, tolerance class, fastening method, size and thickness are matched. The insert features a 7° clearance angle and a 3.97 mm thickness, which together provide stable seating and predictable cutting behaviour. For workshops that value repeatable tolerances, using ISO-compliant indexable inserts makes tool inventory and holder selection straightforward and reduces set-up variability. Controlled chip formation and reliable surface finish A single-sided chipbreaker combined with a 0.8 mm corner radius delivers a balance between strength at the cutting edge and a refined surface finish on workpieces. The rhombic geometry supports both external profiling and internal boring operations where access is limited, while the cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the pocket to maintain alignment under higher cutting forces. These features help achieve stable chip flow and minimise the risk of edge chipping during light interruptions. Application guidance and practical selection advice Designed for turning, the insert is best matched with chipbreaker and grade selection according to workpiece material, machining stability and cut type. For medium-steel operations with continuous cuts, the CVD-coated carbide grade is a first choice; for heavier interruptions or unstable setups, consider a more robust geometry or a reinforced clamping solution. For precise holder matching and cutting-parameter recommendations, technical specifications and compatibility information are available to support process planning and to safeguard cutting performance. Contact Metav Werkzeuge for detailed application support and order the Tungaloy CCMT09T308 T9215 indexable insert for dependable medium-steel turning performance Technical data Article number: 6777770 Manufacturer SKU: TUN6777770 SKU: 6777770-Tungaloy Item designation: CCMT09T308 T9215 Tungaloy insert Facts Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Insert size: 09 Included angle: 80° ISO code: 09T308 Special features CVD-coated carbide, grade T9215 Rhombic CCMT form Single-sided chipbreaker Cylindrical hole + one-side countersink (40°–60°) ISO-series indexable turning inserts Suitable for medium-steel machining Application: turning Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The CCMT09T308 T9215 insert is specified primarily for medium-steel machining, where the CVD-coated carbide grade combines wear resistance with edge strength. Is the insert compatible with standard CCMT holders? Compatibility requires matching the insert form, 7° clearance angle, thickness and fastening style; the CCMT09T308 conforms to ISO dimensions for CCMT-type holders. How does the 0.8 mm corner radius affect part finish? A 0.8 mm corner radius provides a compromise between edge robustness and surface finish, improving edge strength while enabling good finishing on turned surfaces. Can it be used for internal turning as well as external? Yes, the rhombic shape and single-sided chipbreaker make the insert suitable for both external profiling and internal turning operations where access permits. What fastening style does the insert require? The insert features a cylindrical hole with a one-sided countersink (40°–60°) and needs a matching pocket and screw for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, an 80° rhombic geometry and a 0.8 mm corner radius to raise cutting speeds and tool life in medium Stahl turning; order directly via Metav Werkzeuge or consult the technical team for optimum grade selection. CCMT09T308 T9215 — Rhombic CCMT ISO insert, 80° for turning — Tungaloy The CCMT09T308 T9215 is an ISO-indexed, CVD-coated carbide turning insert designed for productive medium Stahl machining, delivering a balance of wear resistance and breakage toughness in continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Rhombic CCMT insert, 80° cutting geometry 0.8 mm corner radius for robust edge Suitable for continuous and light interrupted turning High productivity and consistent wear resistance The combination of CVD-coated carbide and the T9215 grade yields a tool body that resists abrasive wear while maintaining edge strength under elevated cutting loads. This results in longer tool life and fewer index changes, directly improving spindle uptime and reducing non-productive time. The grade is formulated as a first choice for medium Stahl applications, so machining parameters can be pushed toward higher feed and speed windows compared with uncoated or lower-grade inserts. The overall effect is a clear productivity advantage in high-volume turning operations while preserving surface finish quality. Secure seating and stability for repeatable component quality The 80° geometry of the rhombic CCMT form provides a stable cutting edge orientation suited to a wide range of turning tasks, while the 0.8 mm radius strengthens the cutting corner against chipping. A 7° rake angle and a plate thickness of 3.97 mm contribute to rigidity and heat dispersion during heavy cuts. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure reliable clamping and repeatable positioning in compatible ISO tool holders. These mechanical features together promote predictable chip formation and dimensional stability across batches, reducing rework and inspection overhead. Application guidance and selection for reliable process results For best results, match the one-sided chipbreaker and the T9215 grade to the workpiece condition and cutting strategy: choose the breaker geometry for stable chip control under continuous cuts and select the same grade for light interruptions where fracture resistance is needed. Compatibility with the holder depends on form, relief angle, tolerance class, clamping method, insert size and thickness; typical system components include an ISO turning holder or boring bar, support shim/clip and suitable fastening screws. Tungaloy’s manufacturing quality supports consistent performance, making this insert a practical option when process reproducibility and throughput are priorities. Contact Metav Werkzeuge to define the optimal Tungaloy T9215 insert configuration for your turning applications and to arrange precise supply from stock; Metav Werkzeuge’s advisers can recommend feeds, speeds and holder compatibility for immediate implementation. Technical Data Article number: 6772428 Manufacturer SKU: TUN6772428 SKU: 6772428-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core data Corner radius: 0.8 mm Cutting angle: 80° Rake angle: 7° Thickness: 3.97 mm Size: 09 Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features CVD-coated carbide, grade T9215 Rhombic plate form CCMT (ISO) One-sided chipbreaker Intended application: turning (Drehen) Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert suited for? This insert is specified for medium Stahl machining; the T9215 grade combines wear resistance and toughness suited to general medium-carbon and alloyed Stahl turning tasks. What are the key geometry and mounting details? The insert uses an 80° rhombic CCMT geometry, a 0.8 mm corner radius, 3.97 mm thickness and a cylindrical hole with single-sided countersink (40°–60°) for secure clamping in ISO-compatible holders. What cutting conditions are recommended? The T9215 grade is optimised for continuous and light interrupted cuts, enabling higher productivity while maintaining surface integrity and tool life. What coating and grade does the insert have? The item features a CVD-coated carbide substrate in grade T9215, offering a balance of abrasive wear resistance and fracture toughness for stable production. How to ensure holder compatibility before ordering? Check holder form, relief angle, tolerance class, clamping method, insert size and thickness; for the CCMT09T308 T9215 (SKU 6772428-Tungaloy), Metav Werkzeuge can confirm fitment with the chosen ISO turning holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated carbide cutting edge with a 0.8 mm corner radius yields durable, high-productivity turning with reliable chip control for medium steels; the ISO CCMT format ensures compatibility with standard holders. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT09T308 T9215 – CCMT indexable turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) A CCMT09T308 T9215 indexable turning insert for external and internal turning, optimised for medium steel machining and compatible with ISO toolholders. CVD-coated carbide for high wear resistance Optimised for medium steel machining Rhombic CCMT shape with 0.8 mm radius Cylindrical hole with 40°–60° countersink Delivering consistent productivity through wear-resistant coating The combination of a CVD coating on a carbide substrate provides a balance of wear resistance and fracture toughness that supports sustained cutting performance in continuous and lightly interrupted cuts. This translates into longer tool life and fewer index changes, which reduces downtime and contributes to more predictable production schedules. The coating chemistry is selected to maintain edge integrity at elevated temperatures typical of medium steel turning, helping to preserve surface finish and dimensional stability. Straightforward compatibility and secure clamping for reliable operation Built to the ISO CCMT format, the insert is designed for compatibility with standard ISO external holders and boring bars. The rhombic geometry combined with a cylindrical hole and a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating, reducing the risk of movement under load. Clearances such as the 7° relief angle and the specified tolerance classes determine fit; matching holders by form, thickness and fastening method guarantees a safe, stable assembly and consistent cutting behaviour. Practical explanation of geometry and cutting behaviour A 0.8 mm corner radius provides a compromise between edge robustness and the ability to maintain smaller radii for fine profiles. The rhombic CCMT form gives versatile approach angles for both external turning and light boring operations, while the one-sided chipbreaker supports controlled chip formation when machining medium steel. For users with limited metallurgical background: chipbreakers mechanically shape the chip to prevent long, entangling swarf and to optimise heat evacuation from the cutting edge, improving safety and surface quality. Application guidance to maximise process efficiency Select the T9215 grade when machining general medium steels where a balance of wear resistance and toughness is required; the grade is suited to continuous to slightly interrupted cuts. Combining this insert with appropriate speeds, feeds and coolant strategies yields improved tool life and surface integrity. For process planners, the predictable wear pattern of this CVD-coated grade simplifies tool-change intervals and inventory planning, supporting higher throughput and lower unit costs in series production. For high wear resistance and reliable chip control, specify the Tungaloy CCMT09T308 T9215 indexable insert and contact Metav Werkzeuge for stock information and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774056 Manufacturer SKU: TUN6774056 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall SKU: 6774056-Tungaloy Facts Corner radius: 0.8 mm Insert size: 09 Relief angle: 7° Plate thickness: 3.97 mm Cutting angle: 80° Special features CVD-coated carbide grade T9215 Rhombic CCMT plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-format turning indexable insert Application: turning, external and internal Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The Tungaloy CCMT09T308 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade offers a good balance of wear resistance and toughness for continuous to lightly interrupted cuts. How is the insert clamped in a holder? Clamping requires a matching ISO CCMT holder that accommodates the rhombic form, plate thickness (3.97 mm) and the cylindrical hole with countersink; the specified countersink angle (40°–60°) supports secure, repeatable seating. What does the T9215 designation mean for performance? T9215 is a CVD-coated carbide grade selected to combine high wear resistance with good fracture tolerance, making it a first choice for productive machining of medium steels while maintaining edge stability. Can this insert be used for interrupted cuts? Yes; the grade and geometry handle continuous to slightly interrupted cuts. For heavily interrupted operations, a different geometry or a more shock-resistant grade should be considered. Which holders are compatible with this insert? Any ISO-compatible CCMT external holder or boring bar that matches the plate form, size 09, thickness 3.97 mm and relief angle will be compatible; correct matching of tolerance class and clamping method is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide durability and ISO‑standard geometry to maintain steady productivity in medium‑steel turning operations; compatibility with ISO holders and clear dimensions ensure simple tool selection and reliable clamping. Order the insert via Metav Werkzeuge or consult the Metav team for specification advice. CCMT 09T308 T9215 turning insert (ISO CCMT) by Tungaloy — CVD‑coated carbide, 0.8 mm nose radius A CCMT09T308 T9215 indexable turning insert designed for external and internal turning, optimised for medium‑grade steel machining and continuous to light interrupted cuts ISO‑standard CCMT rhombic form CVD-coated T9215 grade for medium steel 0.8 mm nose radius for versatile turning Cylindrical hole with 40°–60° countersink Productivity and wear resistance for medium‑steel turning The CCMT geometry combined with the T9215 CVD‑coated carbide grade delivers a measured balance between wear resistance and fracture toughness, suited to sustained production cycles. The coated substrate helps maintain edge integrity under heat and abrasion while the moderate toughness of the grade reduces the risk of chipping during light interruptions. As a result, machining runs benefit from longer effective tool life and consistent surface finish, supporting steady output with fewer insert changes. Precise geometry for dependable clamping and interchangeability The rhombic CCMT form and clear dimensional data — including the 0.8 mm nose radius, 7° relief angle and 3.97 mm plate thickness — enable predictable mating with ISO‑compatible holders. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; these parameters make the insert straightforward to replace and align in production fixtures. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) ensures secure fastening and repeatable seating in the toolholder. Application guidance and system considerations for efficient use Intended primarily for medium steel applications, the insert is suitable for continuous to light interrupted cuts and is typically used with an external holder or boring bar, plus a shim/clamp set and replacement screws as part of the system build. The single‑sided chipbreaker assists in chip control for common turning feeds, while selecting the correct chipbreaker and grade ensures stable cutting and improved surface integrity. For mixed or harder materials, matching a different chipbreaker or grade is advised to retain performance. For reliable medium‑steel turning choose the Tungaloy CCMT 09T308 T9215 insert — contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772435 Manufacturer SKU: TUN6772435 Model series: ISO‑Drehwendeschneidplatten Designation: CCMT09T308 T9215 Tungaloy‑Wendeplatte Numeric data Nose radius: 0.8 mm Inscribed circle / size: 09 Lead/approach angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Design and special features Shape: rhombic CCMT Grade: T9215 (CVD‑coated carbide) Chipbreaker: single‑sided Hole: cylindrical hole + single‑sided countersink (40°–60°) Application: external and internal turning; medium steel; continuous to light interrupted cuts Compatibility: ISO holders — determined by form, relief angle, tolerance class, clamping, size and thickness Typical system: insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The CCMT09T308 T9215 insert is optimised for medium‑grade steel machining; the T9215 CVD‑coated carbide offers wear resistance and toughness suited to continuous and light interrupted cuts. How does the T9215 coating affect tool life? The T9215 CVD coating enhances abrasion resistance and thermal stability, improving edge life and maintaining consistent cutting performance under typical turning conditions. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO CCMT geometry; compatibility with an ISO holder depends on form, 7° relief angle, tolerance class, clamping method, size and plate thickness (3.97 mm). What chip control can be expected with this insert? The single‑sided chipbreaker provides reliable chip formation for common turning feeds in medium steel, aiding evacuation and reducing risk of entanglement. Which SKU or article number should be referenced when ordering? Reference Article number 6772435 or Manufacturer SKU TUN6772435 when specifying this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, an 0.8 mm corner radius and ISO compatibility for efficient, repeatable turning operations; order the insert directly via Metav Werkzeuge or request cutting data from their consultants. CCMT09T308 T9215 CCMT 09T308 Tungaloy turning insert for Turning, CVD-coated, 0.8 mm radius A CCMT09T308 T9215 turning insert designed for medium steel machining, combining high wear resistance with fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide for wear resistance 0.8 mm corner radius for robust profiles Rhombic 09 form for versatile clamping Single-sided chipbreaker for medium steel High productivity from the grade and coating The CVD-coated carbide grade T9215 offers a balance of wear resistance and breakage security, making it a dependable choice for medium steel turning. The coating reduces flank and crater wear under typical cutting conditions, which extends life and supports stable cutting parameters. This results in fewer indexings and less downtime per workpiece, improving overall shop throughput while maintaining dimensional accuracy. Geometry engineered for stable performance A rhombic insert with an 80° approach angle and 7° relief ensures stable load distribution at the cutting edge; the 0.8 mm corner radius produces a robust cutting profile that resists edge chipping in routine external and internal turning. The with-hole design and one-sided countersink (40°–60°) guarantee secure clamping in compatible holders, while standard ISO form and tolerance classes enable straightforward replacement in approved toolholders and boring bars. Practical system setup and machining advice The insert forms part of an ISO system: indexable insert, matched external holder or boring bar, underplate/clamp set and replacement screws. The single-sided chipbreaker is tuned for continuous to slightly interrupted cuts typical in production turning of steel, supporting consistent chip formation and evacuation. Selecting a matching chipbreaker and the correct stability of the assembly reduces vibration, improves surface finish and prolongs tool life, so machining cycles remain predictable and efficient. Contact Metav Werkzeuge for cutting data and to order the Tungaloy CCMT09T308 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772422 Manufacturer SKU: TUN6772422 SKU: 6772422-Tungaloy Series: ISO turning inserts Dimensions & angles Size designation: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Approach angle: 80° Design & features Material: cemented carbide Grade: T9215 Coating: CVD Shape: rhombic Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Typical use: medium steel machining FAQ What materials is this insert best suited for? The CCMT09T308 T9215 insert (Tungaloy indexable turning insert, SKU 6772422-Tungaloy) is optimised for medium steel machining and delivers a balance of wear resistance and toughness. Is the insert compatible with standard ISO toolholders? Compatibility is determined by form, relief angle, tolerance class, attachment and thickness; the CCMT09T308 adheres to ISO insert dimensions for straightforward replacement in matching holders. What benefits does the T9215 grade provide? T9215 is a CVD-coated carbide grade offering high wear resistance with enhanced fracture safety, supporting higher productivity in continuous to lightly interrupted turning operations. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and correct seating in compatible external holders or boring bars for consistent cutting geometry. Which chipbreaker is fitted and what is its purpose? The insert features a single-sided chipbreaker designed to control chip formation during turning of medium steels, improving evacuation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide T9215 for high wear resistance and the ISO CCMT09T308 form for wide holder compatibility to keep turning operations productive and consistent; order the inserts directly via Metav Werkzeuge or consult the technical team for selection advice. CCMT 09T308 T9215 ISO indexable turning insert — Tungaloy, 80° rhombic geometry, CVD-coated carbide CCMT 09T308 T9215 is an ISO‑format indexable insert designed for general turning applications, combining a robust CVD coating with a rhombic 80° geometry for reliable medium‑steel machining ISO CCMT format for standard toolholders CVD-coated carbide T9215 for wear resistance 80° rhombic geometry for versatile turning Single-sided chipbreaker with cylindrical hole Improved productivity for medium‑steel turning The CVD‑coated carbide grade T9215 is engineered as a first choice for medium‑steel machining, providing a balance of wear resistance and fracture toughness that supports higher material removal rates. In continuous to lightly interrupted cuts this coating and substrate combination reduces flank wear and extends tool life, leading to longer uninterrupted production runs and fewer index changes. The result is a measurable uplift in throughput with consistent surface quality. Secure clamping and broad holder compatibility The ISO CCMT09T308 form with an included angle of 80° and a clearance angle of 7° offers broad compatibility with common external holders and boring bars. The insert thickness of 3.97 mm and the rhombic outline ensure stable seating and clamping; the cylindrical hole with one‑sided countersink (40°–60°) supports standard fastening systems and repeatable assembly. These geometrical features simplify tool changeovers and reduce set‑up variability in batch production. Controlled chips and consistent surface finish A single‑sided chipbreaker tailored to the grade promotes predictable chip formation during turning, which helps maintain cutting stability and reduces the risk of tool damage on light interruptions. The combination of geometry and coating supports improved surface finish in finishing passes while allowing secure performance in semi‑roughing when machine and clamping rigidity are sufficient. The insert forms part of a system comprising the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for full process control. Contact Metav Werkzeuge to confirm suitability for specific turning tasks or to request availability of the Tungaloy CCMT09T308 T9215 inserts; technical advice and order handling are available via Metav Werkzeuge. Technical data Article number: 6772440 SKU: 6772440-Tungaloy Manufacturer SKU: TUN6772440 Material: Cemented carbide Series: ISO turning inserts Type designation: CCMT09T308 Facts Corner radius: 0.8 mm Insert size: 09 Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Special features Coating: CVD (grade T9215) Chipbreaker: single-sided Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Recommended for: medium steel machining, continuous to light interrupted cuts FAQ Which materials are best machined with this insert? The Tungaloy CCMT09T308 with T9215 CVD coating is optimised for medium‑grade steels, delivering high wear resistance and good toughness for productive turning operations. Which holder types are compatible with this insert? Compatibility follows the ISO CCMT form; the insert fits standard CCMT external holders and boring bars when form, clearance angle, tolerance class, fastening and thickness match the toolholder specifications. Is the insert suitable for interrupted cuts? The grade and geometry are suited to continuous and light interrupted cutting; heavier interruptions require assessment of holder rigidity and cutting parameters for stable performance. How does the chipbreaker affect surface finish? The single‑sided chipbreaker promotes consistent chip control and cutting stability, supporting improved surface quality in finishing passes while still allowing efficient semi‑roughing when conditions permit. What does the cylindrical hole with countersink mean for clamping? The cylindrical hole plus one‑sided countersink (40°–60°) enables standard clamping with replacement screws and shim/clamp sets, ensuring repeatable seating and secure fastening in typical tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and fracture toughness delivered by the CVD-coated carbide grade T9215 combined with a precise 0.8 mm corner radius for consistent surface finish and long cutting life; order these inserts directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 09T308 T9215 — Tungaloy turning insert (CVD-coated carbide, 0.8 mm radius) CCMT 09T308 T9215 is an ISO rhomboid turning insert designed for medium steel machining, featuring an 80° geometry and a 7° relief angle for robust edge support and repeatable results. CVD-coated carbide grade T9215 0.8 mm corner radius for fine finishes ISO rhomboid 80° geometry Cylindrical hole with single-sided countersink Reliable wear resistance for medium steel productivity The CVD-coated carbide grade T9215 combines wear resistance with enhanced fracture toughness, making it a strong choice for sustained production runs. This combination supports high material removal rates while maintaining edge integrity under continuous to slightly interrupted cuts. The coating improves resistance to abrasion and built-up edge, which in turn extends effective tool life and reduces unscheduled tool changes, translating into measurable shop-floor efficiency gains. Geometry engineered for surface quality and strength The 80° geometry and 0.8 mm corner radius provide a balance between edge strength and surface finish: the larger included angle increases the effective cutting edge engagement, while the corner radius smooths the transition to the workpiece for improved surface appearance. The 7° relief reduces friction behind the cutting edge, helping to prevent rubbing and heat build-up. Together these geometric features support consistent part quality and reduce rework requirements when turning medium-grade steels. Secure clamping and system compatibility Designed as an ISO-compliant insert, compatibility with the toolholder depends on form, relief, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure clamping in compatible holders and boring bars. This secure fixation minimises micro-movement under load, supporting repeatable axial and radial positioning for precision turning operations and predictable tool life across batches. Proven productivity and predictable economics Selecting a carbide insert that suits both the workpiece material and cutting conditions reduces cycle times and tooling costs per part. The single-sided chipbreaker and the coating synergy result in controlled chip formation and stable cutting forces, which benefits throughput and machine uptime. For manufacturing environments prioritising repeatability and lower unit cost, these inserts help to shorten machining cycles and limit downtime for tool changes, supporting a more efficient production workflow. For tailored advice on applying Tungaloy CCMT 09T308 T9215 inserts or to secure a supply via Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance and rapid delivery options are available. Technical Data Article number: 6772432 Manufacturer SKU: TUN6772432 SKU: 6772432-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 80° Relief (free) angle: 7° Thickness: 3.97 mm Insert size: 09 Special features Material: carbide (Hartmetall) Coating / grade: CVD-coated, T9215 Shape: rhomboid Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning; optimised for medium steel machining FAQ What materials is this insert suitable for? The CCMT 09T308 T9215 turning insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 provides a balance of wear resistance and fracture toughness suitable for continuous to lightly interrupted turning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius on the CCMT insert increases edge strength and improves surface finish by smoothing the cutting action, which is especially beneficial when consistent part quality is required. Is this insert compatible with standard ISO holders? Compatibility depends on holder form, relief, tolerance class, fastening and size; the insert’s cylindrical hole with single-sided countersink (40°–60°) is designed for secure clamping in compatible ISO toolholders and boring bars. What cutting conditions suit this grade best? The Tungaloy T9215 grade performs well under higher productivity regimes and is recommended for continuous to slightly interrupted cuts in medium steels, where both durability and fracture resistance are required. Which product identifiers should be used when ordering? Order using Article number 6772432 or Manufacturer SKU TUN6772432 to ensure the correct CCMT 09T308 T9215 Tungaloy turning inserts are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the ISO CCMT09T308 geometry to achieve consistent performance in medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCMT 09T308 T9225 – Turning insert by Tungaloy, ISO CCMT09T308, rhombic CCMT09T308 T9225 is an ISO-conforming turning insert designed for external and internal turning in demanding steel applications, offering robustness for interrupted cuts and variable engagement. ISO rhombic CCMT geometry CVD-coated T9225 grade for steel turning 0.8 mm corner radius for durable edges Cylindrical hole with single-side countersink High-performance turning where consistency matters This rhombic turning insert is built on a carbide substrate with a CVD coating, delivering a balanced combination of wear resistance and toughness suited to medium-to-heavy steel machining. The T9225 grade is a robust universal option when cutting conditions vary or short interruptions occur, allowing longer tool life and less frequent index changes. The ISO specification and standardised geometry ensure predictable cutting action and straightforward integration into common holder systems. Precision fit and system-compatible design for reliable setup Compatibility with the toolholder depends on form, clearance angle 7°, tolerance class, fastening method, size and thickness; the insert is supplied in the ISO CCMT format for straightforward selection. The part features a 0.8 mm corner radius and a plate thickness of 3.97 mm, while the hole design is a cylindrical bore with a one-sided countersink (40°–60°), supporting stable clamping and repeatable seating. For a complete system, combine the insert with a matching outer holder or boring bar, a shim/locking set and replacement screws to secure consistent clamping force. Practical benefits for shop-floor productivity and surface quality The single-sided chipbreaker and the grade choice enable controlled chip formation and reliable evacuation, which contributes to stable machining and improved surface finish on steel components. The robust edge tolerance helps absorb fluctuations in engagement, reducing the risk of premature edge failure during interrupted cuts. Specifying this ISO-format insert streamlines tool inventory and supports predictable productivity gains on both batch and single-piece turning operations. Contact Metav Werkzeuge for tailored advice on toolholders and process parameters for the CCMT09T308 T9225 turning insert; Metav Werkzeuge can advise on matching chipbreakers and supply the required system components — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781452 Manufacturer SKU: TUN6781452 SKU: 6781452-Tungaloy Name: CCMT09T308 T9225 Tungaloy insert Core specifications Geometry: CCMT (rhombic) ISO code: 09T308 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 3.97 mm Size: 09 Principal angle: 80° Hole: with hole Special features Material: carbide Coating: CVD-coated Grade: T9225 (robust universal for steel) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning Model series: ISO turning inserts FAQ What materials is this insert intended for? The CCMT09T308 in T9225 grade is optimised for machining steel and is particularly suited to medium-to-heavy turning where toughness is required. Can the insert handle interrupted cuts? Yes, the T9225 grade and robust carbide substrate are designed to tolerate variable engagement and short interruptions without rapid edge degradation. What holder characteristics must be matched for proper use? Compatibility is determined by the insert form, clearance angle 7°, tolerance class, fastening method, size and thickness; using a matching ISO CCMT holder and correct clamping hardware ensures correct seating. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert controls chip formation for improved evacuation and consistent surface quality during steel turning. Is the CCMT09T308 suitable for internal and external turning? Yes, the ISO CCMT geometry and hole design allow use in appropriate outer holders and boring bars for both external and internal turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated carbide grade T9225 and a 0.8 mm nose radius for reliable medium-to-heavy steel turning and stable performance under variable engagement. Order or check compatibility via Metav Werkzeuge if further advice is required. CCMT09T308 T9225 — ISO rhombic turning insert for medium-to-heavy steel by Tungaloy The CCMT09T308 T9225 is an ISO rhombic turning insert designed for external and internal turning operations in steel, offering a single-sided chipbreaker, CVD coating and suitability for interrupted cuts. ISO CCMT 09T308 geometry CVD-coated carbide grade T9225 0.8 mm nose radius for stable cuts With cylindrical hole and countersink Proven productivity and predictable tool life for steel turning The rhombic ISO geometry with an 80° included angle and 7° relief provides a predictable contact pattern, reducing vibration and improving surface finish during turning. The combination of CVD-coated carbide and the T9225 grade yields a balance of toughness and wear resistance, meaning fewer indexings and longer productive cutting periods in medium-to-heavy steel operations. For users who require repeatable cycle times and consistent part quality, this insert delivers measurable improvements in process reliability. System compatibility and secure clamping for stable machining Designed as an ISO-standard indexable plate, the insert fits holders that match form, relief angle, tolerance class, fixation and thickness. The plate thickness of 3.97 mm, cylindrical hole with one-sided countersink (40°–60°) and standard 09 size ensure secure seating and reliable clamping. Proper holder and insert pairing reduces micro-movement at the cutting edge, which in turn preserves the integrity of the cutting edge and maintains dimensional accuracy on turned components — a clear advantage for batch production and precision parts. Practical guidance for selection and machining Select the single-sided chipbreaker and the T9225 grade when operations involve varying engagement or lightly interrupted cuts that need added toughness. The 0.8 mm nose radius is optimised for a mix of surface finish and chip control; smaller radii favour fine finishing, larger radii favour heavy stock removal. Cutting parameters should be adapted to the material and rigidity of the setup: moderate speeds and feeds deliver the best compromise between tool life and productivity in typical steel applications. For less experienced planners, this insert simplifies process design through its universal performance profile. For reliable medium-to-heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to confirm holder compatibility and place an order. Technical data Article number: 6781140 SKU: 6781140-Tungaloy Manufacturer SKU: TUN6781140 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Nose radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Plate size: 09 Included angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features CVD-coated carbide Grade T9225 — robust universal grade for medium-to-heavy steel Rhombic (CCMT) plate form Single-sided chipbreaker ISO CCMT09T308 designation With hole for secure clamping Application: turning (external and internal) FAQ What materials is this insert suited for? The CCMT09T308 T9225 insert is optimised for medium-to-heavy steel turning; the T9225 grade offers toughness suited to variable engagement and lightly interrupted cuts. Is the CCMT09T308 compatible with standard ISO CCMT holders? Yes, the insert follows ISO CCMT geometry — compatibility depends on matching form, relief angle, tolerance and plate thickness to the holder. What is the advantage of the T9225 grade? Tungaloy’s T9225 grade combines toughness and wear resistance, making it suitable for productive steel machining where engagement conditions may change. How does the 0.8 mm nose radius affect machining? A 0.8 mm radius balances surface finish and edge strength; it improves stability for general turning tasks compared with a finer radius while still allowing decent surface quality. Does the insert include a chipbreaker and a clamping hole? Yes, the plate features a single-sided chipbreaker and a cylindrical hole with one-sided countersink for reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance with a compact 0.8 mm corner radius and secure mounting for consistent production results; order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility. CCMT 09T308 T9225 — Turning insert (ISO CCMT09T308) by Tungaloy The CCMT09T308 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning in medium to heavy steel applications. CVD-coated carbide grade T9225 for steel turning 0.8 mm corner radius for stable chip control Rhombic ISO CCMT09T308 form, 7° clearance Cylindrical hole with single-side countersink 40°–60° High-performance coating and grade for longer tool life The combination of a CVD-coated carbide substrate and the T9225 grade provides a dependable balance between wear resistance and toughness. In practical terms, the coating reduces abrasive wear while the carbide core maintains edge stability under moderate interruption, which means fewer insert changes and more productive machining cycles. The indexable insert is engineered for steel machining, so choosing this grade reduces the risk of premature flank wear and helps sustain consistent dimensional accuracy across batches. Geometry that enhances stability and surface quality The rhombic form with an included angle of 80° and a 0.8 mm corner radius delivers a compromise between cutting-edge strength and finish quality. A larger corner radius increases the effective cutting edge engagement, improving surface finish and tool life when turning heavier sections, while the 7° clearance helps avoid rubbing on the flank. The single-side chipbreaker controls chip formation for common turning operations, and the cylindrical hole with single-side countersink (40°–60°) secures the insert reliably in the clamping system, reducing vibration and improving repeatability. Practical system compatibility and application guidance Compatibility with holders is determined by form, clearance, tolerance class, mounting, size and thickness; the insert’s ISO CCMT09T308 designation and a thickness of 3.97 mm ensure interchangeability with standard CCMT toolholders. The single-side chipbreaker and the 0.8 mm corner make this insert suitable for stable external turning as well as internal boring where the holder offers sufficient support. For interrupted cuts or variable engagement, the CVD-coated carbide grade gives additional edge protection and toughness, supporting reliable cycle times and predictable reconditioning intervals. Contact Metav Werkzeuge for a tailored tooling recommendation based on the Tungaloy T9225 grade and CCMT09T308 geometry — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6781261 Manufacturer SKU: TUN6781261 SKU: 6781261-Tungaloy Model series: ISO turning indexable inserts ISO designation: CCMT09T308 Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 3.97 mm Countersink angle: 40°–60° Plate size: 09 Special features CVD-coated carbide, grade T9225 Rhombic form (CCMT) Single-side chipbreaker Cylindrical hole with single-side countersink ISO‑standard turning insert for external and internal turning Compatible with CCMT holders and boring bars FAQ Which materials is this insert suitable for? The CCMT09T308 in T9225 is optimised for medium to heavy steel machining and performs reliably under slightly interrupted cuts where additional toughness is required. How does the CVD coating benefit the machining process? A CVD-coated carbide insert like the T9225 reduces abrasive wear on the cutting edge, extending tool life and maintaining consistent surface finish during prolonged turning operations. Can this insert be used for internal turning/boring? Yes; the rhombic geometry and 0.8 mm corner radius make the insert suitable for internal turning where the holder provides adequate support and the working conditions match the grade’s capabilities. What does the hole and countersink specification mean for clamping? The cylindrical hole with single-side countersink (40°–60°) secures the insert in standard CCMT clamping systems, improving stability and repeatability during machining. How to choose the right chipbreaker or holder for this insert? Select the chipbreaker and holder according to the workpiece material, required surface finish and the stability of the setup; the insert’s single-side chipbreaker is a versatile choice for many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise 0.8 mm corner radius, and ISO compatibility for reliable turning performance; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. CCMT09T308 T9225 ISO turning insert by Tungaloy — rhomboid, 0.8 mm radius The CCMT09T308 T9225 is an ISO-standard indexable insert designed for general turning, offering a durable solution for medium to heavy steel machining. CVD-coated carbide for durability Universal grade for medium–heavy steel Rhomboid form with 80° included angle Cylindrical hole with countersink (40°–60°) Consistent cutting in medium to heavy steel The combination of CVD-coated carbide and the T9225 universal grade delivers robust performance when machining steel under variable engagement and slightly interrupted cuts. The coating enhances wear resistance and contributes to predictable tool life, while the substrate carbide ensures toughness where chip formation and impact occur. This yields improved process stability and reduces the frequency of insert changes, which is particularly beneficial in production environments requiring steady cycle times and repeatable surface quality. Precision fit and simple integration into ISO tooling Compatibility with standard toolholders is determined by form, 7° relief, tolerance class, fastening method, size and thickness. The rhomboid geometry with an 80° included angle, 0.8 mm corner radius and 3.97 mm thickness ensures a secure mechanical fit and consistent clamping. The insert’s cylindrical hole with a single-sided countersink (40°–60°) provides reliable seating and torque transmission when used with matching clamping sets and screws. Clear identification of these parameters simplifies the selection of the correct holder and minimises setup time. Practical benefits for workshop efficiency A dedicated indexable insert grade like this one offers economical tooling: fewer complete-tool replacements, predictable wear patterns and manageable inventory for common turning tasks. The single-sided chipbreaker supports controlled chip formation on typical steels, improving surface finish and reducing rework. When combined with standardised ISO interfaces, the insert supports fast changeovers and consistent results across shifts, contributing to overall process reliability and lower total machining cost. For specialist advice or to secure original Tungaloy inserts for production use, contact Metav Werkzeuge—our consultants provide application-matched recommendations and availability information. Technical data Article number: 6781052-Tungaloy Manufacturer SKU: TUN6781052 Manufacturer article number: 6781052 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Plate size: 09 Included angle: 80° Features Material: carbide Coating: CVD-coated Grade: T9225 Form: rhomboid Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning System: ISO indexable inserts; compatibility via form, free angle, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT09T308 T9225 insert is a CVD-coated carbide grade formulated as a universal choice for medium to heavy steel machining and performs well under varying engagement and lightly interrupted cuts. How does the insert’s geometry affect performance? The rhomboid form with an 80° included angle and 0.8 mm radius offers a balance of strength and accessibility for external and internal turning, while the single-sided chipbreaker helps maintain stable chip control. Which holders are compatible with this ISO insert? Compatibility depends on holder form, 7° relief, tolerance class, fastening type, size and thickness—matching those parameters ensures proper seating and clamping for the indexable insert. Is the insert suitable for interrupted cutting or heavy cuts? Yes. The T9225 grade provides increased toughness for slightly interrupted cuts and medium–heavy cutting conditions, supporting reliable chip formation and tool life. What fastening arrangement does the insert use? The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to match common ISO clamping systems and secure the insert in place. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated cemented carbide grade that delivers consistent performance in medium to heavy steel turning; the hardened edge geometry and secure, countersunk hole ensure reliable clamping and stable chip control in interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our team for application guidance. CCMT09T308 T9225 CCMT indexable insert for turning — Tungaloy CCMT09T308 T9225 is an ISO-standard rhombic indexable insert designed for medium to heavy-duty turning of steel with a one-sided chipbreaker. CVD-coated cemented carbide Robust universal grade T9225 Rhombic CCMT shape, 7° clearance 0.8 mm corner radius Cylindrical hole with countersink 40°–60° High-performance cutting with durable CVD-coated carbide The CVD-coated cemented carbide composition of this insert provides a balance of wear resistance and toughness that suits sustained metal removal. As a universal grade, T9225 is tailored for medium to heavy steel turning, offering resilience under slightly interrupted cuts and variable engagement conditions. The engineered coating reduces flank wear, prolonging effective tool life and enabling predictable tool-change intervals, which contributes directly to process reliability and cost-efficiency. Secure clamping and precise fit for stable machining Compliance with ISO form and dimensions ensures compatibility with standard holders when geometry, clearance and tolerance class match. The insert features a cylindrical hole with one-sided countersink (40°–60°), which facilitates secure clamping and repeatable seating in the pocket. The 7° clearance minimises rubbing on the flank face while the rhombic form with an 80° included angle supports both finishing and more aggressive turning without compromising stability. Optimised geometry for surface finish and strength A 0.8 mm corner radius provides a compromise between edge strength and surface quality: larger radii increase load capacity for heavy cuts, while smaller radii favour finer finishes. The plate thickness of 3.97 mm contributes to insert rigidity and resistance to chipping. The one-sided chipbreaker design assists chip control in common turning conditions; selecting the appropriate chipbreaker and insert grade according to workpiece stability and cutting parameters will improve machining consistency. Practical benefits for production environments Standardised ISO sizing and proven grade chemistry reduce tooling complexity at scale, simplifying inventory and tool selection. The insert’s combination of toughness and wear resistance supports longer tool life and fewer unexpected interruptions, which translates into reduced downtime and lower effective cutting costs. For job shops and production lines that require dependable performance in varied turning tasks, this solution balances productivity with long-term repeatability. For precise tool selection and availability of the Tungaloy CCMT09T308 T9225 insert, contact Metav Werkzeuge for tailored recommendations and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781480 Manufacturer article number: 6781480 SKU: 6781480-Tungaloy Facts Model series: ISO turning indexable inserts Designation: CCMT09T308 Size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Material: cemented carbide Coating: CVD Shape: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What workpiece materials is this insert suitable for? The CCMT09T308 T9225 insert is formulated for steel turning and performs well in medium to heavy cuts where toughness is required. How does the T9225 grade behave in interrupted cuts? T9225’s balanced toughness reduces the risk of chipping during slightly interrupted cuts, offering stable performance under variable engagement. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, attachment method, size and thickness; ISO-standard external holders matching CCMT geometry are typically suitable. What advantage does the countersunk hole provide? The cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and repeatable seating, improving rigidity and reducing vibration during turning. Can this insert be used for finishing as well as aggressive cuts? Yes; the rhombic CCMT form and 0.8 mm corner radius allow a balance between finish quality and edge strength, making it adaptable across finishing and more aggressive turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the robust T9225 grade to maintain productivity during medium to heavy Stahl turning; the ISO conformity and secure clamping features ensure repeatable results. Order the insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. CCMT 09T308 T9225 – ISO turning insert by Tungaloy, CVD-coated carbide for medium to heavy Stahl machining The CCMT09T308 T9225 is an ISO rhombic turning insert engineered for reliable outer and inner turning in variable cutting conditions, offering a 0.8 mm corner radius and a one-sided chipbreaker for improved chip control. CVD-coated carbide grade T9225 Rhombic CCMT 09 insert, 0.8 mm radius One-sided chipbreaker for Stahl machining Cylindrical hole with 40°–60° countersink Consistent cutting performance for medium to heavy Stahl operations The combination of a CVD-coated carbide cutting material and the T9225 cutting grade provides a balance of hardness and toughness tailored to medium to heavy Stahl machining. This configuration supports interrupted cuts and variable engagement without sacrificing stability, which translates into fewer tool changes and more consistent cycle times. The one-sided chipbreaker helps direct chips away from the cutting zone, reducing risk of re-cutting and improving surface integrity. For production environments where changing workpiece conditions occur, this insert delivers predictable wear behaviour and repeatable dimensional control. Secure fit and repeatability with ISO conformity Designed to the ISO dimensions for rhombic turning plates, the insert ensures compatibility with standard indexable holders when matched by form, tolerance class, thickness and fastening. The 3.97 mm plate thickness and the 7° clearance angle contribute to a stable seating and effective rake geometry, while the cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and precise location. These mechanical characteristics support high repeatability across tool changes and simplify inventory management by aligning with ISO toolholder systems, which is particularly beneficial for workshops seeking reduced setup times and improved process control. Practical application notes and handling benefits The 0.8 mm corner radius offers a compromise between edge strength and finish quality, making the insert suitable for general turning tasks where robustness is required without major sacrifices in surface condition. The insert form and one-sided chipbreaker should be matched to the chosen feed and depth of cut to optimise chip formation and evacuation. As part of a complete system—indexable insert, matching outside holder or boring bar, clamp plate and replacement screws—the component supports straightforward maintenance and rapid index changes. For mixed batches or repair work, the T9225 grade's versatility reduces the need for multiple specialised grades, improving tooling economy. For reliable supply and expert application support of this Tungaloy insert, contact Metav Werkzeuge and request guidance on holder compatibility or cutting parameters. Technical data Article number: 6781148 Manufacturer SKU: TUN6781148 SKU: 6781148-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 09T308 Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Grade: T9225 Coating: CVD Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Drehen FAQ What materials is this insert suitable for? The Tungaloy CCMT09T308 in grade T9225 is designed primarily for medium to heavy Stahl machining and performs reliably under variable engagement conditions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius on the CCMT09T308 provides a good balance between edge strength and surface finish, making it appropriate for general turning tasks with moderate feeds. Is this insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the ISO conformity of the plate supports use with standard ISO holders when matched correctly. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker on this insert improves chip control during turning, helping to direct chips away from the cutting zone and enhancing surface integrity. Which cutting grade should be chosen for interrupted cuts? The T9225 grade of the CCMT09T308 is formulated to offer additional toughness for interrupted or varying cuts, making it a practical choice for such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, precise ISO geometry and secure clamping for consistent performance in medium to heavy steel turning. Order via Metav Werkzeuge or contact the consultants for tailored selection and compatibility checks. CCMT09T308 T9225 turning insert by Tungaloy — CVD-coated carbide for medium to heavy steel The CCMT09T308 is an ISO-standard rhomboid turning insert designed for external and internal turning in steel applications, offering a balance of toughness and wear resistance for intermittent and variable engagement conditions. CCMT09T308 rhomboid insert for turning CVD-coated carbide grade T9225 0.8 mm corner radius, 7° clearance angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for medium to heavy steel The CVD-coated carbide grade T9225 provides a robust universal solution for the machining of medium to heavy steel, combining surface protection with substrate toughness to resist chipping under interrupted cuts. This coating technology increases edge life while maintaining the mechanical strength of the carbide body, which translates into fewer indexings and longer production runs. The result is improved process stability and predictable tool life, which supports productivity and reduces unplanned downtime in serial turning operations. Precise geometry and secure clamping for repeatable results The rhomboid geometry with an 80° included angle, 0.8 mm corner radius and 7° clearance angle yields a stable cutting edge that supports consistent surface finish and dimensional control. A plate thickness of 3.97 mm and the cylindrical hole with a single-side countersink (40°–60°) ensure secure seating in ISO-compatible holders, lowering the risk of movement under load. These geometric attributes facilitate predictable cutting forces and vibration damping, which benefits both roughing passes and finishing cycles by improving repeatability across batches. System compatibility and practical guidance for setup As an ISO-indexable insert, the component forms part of a complete system that includes a suitable external holder or boring bar, underlay/clamping set and replacement fixing screws; compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The single-sided chipbreaker is matched to general turning tasks but should be selected according to workpiece material and machining stability for optimal chip control. For complex or variable machining conditions the combination of a robust universal grade and the correct chipbreaker reduces the likelihood of edge failure and supports continuous operation with predictable outcomes. Metav Werkzeuge provides technical advice and compatibility checks for system selection. Contact Metav Werkzeuge for application-specific advice on the Tungaloy CCMT09T308 CVD-coated insert and to confirm holder compatibility; info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781115 SKU: 6781115-Tungaloy Manufacturer SKU: TUN6781115 Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Plate thickness: 3.97 mm Plate size: 09 Special features Material: carbide Grade/coating: T9225, CVD-coated Plate form: rhomboid Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning System: ISO-indexable insert, compatible holders and clamping sets FAQ What materials is this insert suited to machine? The CCMT09T308 with T9225 grade is intended primarily for medium to heavy steel machining and performs well under slightly interrupted cutting conditions. How does the CVD coating benefit tool life? A CVD-coated surface on the Tungaloy insert enhances wear resistance while preserving substrate toughness, which increases edge life and reduces the frequency of indexings for continuous turning. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the CCMT09T308 is ISO-standard and fits holders designed for CCMT-format inserts. What does the plate hole specification mean for clamping? The cylindrical hole with a single-side countersink (40°–60°) provides a secure seating and reliable clamp engagement, supporting repeatable positioning under cutting loads. When should the single-sided chipbreaker be changed? The single-sided chipbreaker is suitable for general turning; selection should be reviewed when changing workpiece material, cut depth or if chip control issues arise during operation. Is this an original Tungaloy product and what is the SKU? This is an original Tungaloy turning insert, listed under SKU 6781115-Tungaloy (manufacturer SKU TUN6781115). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
CCMT09T308 T9225 Tungaloy-Wendeplatte zum Drehen | Tungaloy Die CCMT09T308 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für mittlere bis schwere Stahlbearbeitung und bietet robuste Zähigkeit bei wechselnden Schnittbedingungen. ISO-genormt, rhombische Form Robuste Sorte T9225 für Stahlbearbeitung Eckenradius 0,8 mm für präzisen Schnitt Mit Loch und einseitiger Senkung 40°–60° Einseitiger Spanbrecher für stabile Spanbildung Produktivität steigern durch wirtschaftliche Zerspanung Die Wendeplatte wurde entwickelt, um Produktionsprozesse wirtschaftlich zu gestalten und die Maschinenlaufzeit zu maximieren. Durch die Kombination aus Wirtschaftlichkeit und robuster Schneidstoffsorte ergibt sich eine verlässliche Performance bei Außen- und Innendrehen. Ein praxiserprobter Einsatzbereich ist die Serienfertigung von Stahlkomponenten, wobei die Platte unter wechselnden Eingriffsbedingungen stabile Ergebnisse liefert. Vorteil für Anwender: Höhere Ausbringung bei planbarer Standzeit. Material und Beschichtung für längere Standzeiten Die Wendeschneidplatte besteht aus Hartmetall mit CVD-Beschichtung, die eine harte, verschleißarme Oberfläche erzeugt. CVD steht für chemische Dampfabscheidung und sorgt für gute Haftung und Hitzebeständigkeit der Schicht. Daraus resultiert eine höhere Verschleißfestigkeit bei unterbrochenen Schnitten und bei Bearbeitung legierter Stähle. Ein technischer Nutzen ist die reduzierte Werkzeugwechselrate, was Stillstandzeiten im Fertigungsablauf minimiert. Passgenauigkeit und Anwendungshinweise für Halter Für optimale Ergebnisse ist die Kompatibilität zum Halter entscheidend; entscheidend sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die Platte eignet sich für Außen- und Innendrehen; der einseitige Spanbrecher wurde für stabile Spanbildung bei mittleren bis schweren Schnitten ausgelegt. Beim Einbau empfehlen sich passende Unterlage, Klemmsatz und Ersatzschrauben, um Wiederholgenauigkeit und sichere Spannverhältnisse zu gewährleisten. Zielgruppe und Einsatzempfehlung Die Platte richtet sich an Lohnfertiger, Automobilzulieferer und industrielle Werkstätten, die produktive und robuste Schneidlösungen für Stahl benötigen. Besonderer Vorteil ist die universelle Einsetzbarkeit der Sorte T9225 bei variierenden Bearbeitungsbedingungen und leicht unterbrochenem Schnitt. Für Anwender, die eine zuverlässige Kombination aus Verschleißfestigkeit und Zähigkeit benötigen, ist diese Platte eine nachhaltige Wahl. Empfehlung: Die CCMT09T308 T9225 Tungaloy-Wendeplatte empfiehlt sich für produktive Stahlbearbeitung – bei Fragen oder Bestellanfragen bitte Kontakt zu Metav Werkzeuge aufnehmen: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6781205 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CCMT09T308 T9225 Tungaloy-Wendeplatte Daten Eckenradius: 0,8 mm Plattendicke: 3,97 mm Freiwinkel: 7° Spitzenwinkel: 80° Plattengröße: 09 Besonderheiten Material: Hartmetall Beschichtung: T9225 (CVD-beschichtet) — CVD: chemische Dampfabscheidung Form: rhombisch Mit Loch: zylindrisches Loch + einseitige Senkung 40°–60° Spanbrecher: einseitig Anwendung: Drehen SKU Hersteller: TUN6781205 FAQ Für welche Werkstoffe eignet sich die Wendeplatte am besten? Die CCMT09T308 T9225 Tungaloy-Wendeplatte eignet sich primär für die Bearbeitung von Stahl und legiertem Stahl; die Sorte T9225 bietet Zähigkeit für leicht unterbrochene Schnitte und mittlere bis schwere Zerspanung. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung der Platte erhöht die Verschleißfestigkeit und Hitzebeständigkeit, wodurch die Standzeit gegenüber unbeschichteten Schneiden bei vergleichbaren Bedingungen deutlich verbessert wird. Welche Rolle spielt der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm sorgt für präzise Kantenausbildung und stabile Schnittkräfte, was zu gleichmäßigem Verschleißbild und verbesserten Oberflächengüten bei Bauteilen führt. Ist die Platte für innendrehende Anwendungen geeignet? Ja, die ISO-genormte CCMT09T308 ist für Außen- und Innendrehen ausgelegt; die rhombische Form und die Abmessungen ermöglichen vielseitigen Einsatz in entsprechenden Haltern. Welche Befestigungsmerkmale sind zu beachten? Beim Einsatz sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters zu prüfen; zusätzlich sollten passende Unterlagen, Klemmsätze und Ersatzschrauben verwendet werden, um sichere Spannverhältnisse zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for toughness and an ISO-standard form that ensures straightforward compatibility with common holders; the result is reliable material removal in medium to heavy steel turning. Order directly via Metav Werkzeuge or consult the technical team for selection and holder matching. CCMT 09T308 T9225 – ISO turning insert (CVD-coated carbide, universal grade) by Tungaloy The CCMT 09T308 T9225 is an ISO-standard turning insert for general turning applications, engineered for consistent performance in medium to heavy steel machining and for use where variable cutting conditions demand additional toughness. CVD-coated carbide grade T9225 For medium to heavy steel machining Rhombic 80° insert with 7° clearance 0.8 mm corner radius, single-sided chipbreaker High-performance metal removal with consistent tool life The combination of a CVD-coated surface and a robust carbide substrate delivers a balance between wear resistance and toughness that suits intermittent cuts and variable engagement. The T9225 grade is designed for productive turning of medium to heavy steel, reducing flank wear under fluctuating loads and maintaining edge stability. As a consequence, cycle times remain predictable and tool-change frequency is lowered, which supports uninterrupted production runs and cost-effective machining. Secure clamping and ISO compatibility to reduce setup time Compatibility is governed by ISO form, clearance angle, tolerance class, attachment type, size and thickness; using an ISO-standard insert simplifies matching to widely used toolholders. The rhombic geometry with an 80° included angle and 7° clearance provides a stable seat in the pocket, while the central hole with cylindrical bore and one-sided countersink ensures repeatable clamping. These features reduce the time spent on setup checks and contribute to safer, more reliable turning operations. Optimised chip control and application versatility A single-sided chipbreaker tailored to the grade assists in forming manageable chips when machining steels, improving evacuation and surface finish. The insert’s 0.8 mm corner radius supports a balance between edge strength and attainable surface quality; larger radii increase robustness, while this radius still enables fine finishing passes. Designed as a universal option, the insert is suitable for external and internal turning where moderate to heavy material engagement occurs. Practical guidance for selection and use Choose cutting parameters and a chipbreaker variant compatible with the workpiece and machine rigidity; lower feeds and conservative depths are advised when entering interrupted cuts despite the increased toughness of the grade. The 3.97 mm thickness provides sufficient clamping support for stable cutting, and the rhombic form offers multiple effective cutting edges when indexed correctly. When in doubt about holder compatibility or parameter windows, consult data sheets or the technical documentation supplied with the insert. For precise matching of toolholder, cutting data and to order original Tungaloy CCMT 09T308 T9225 turning inserts, contact Metav Werkzeuge for specialist advice and rapid supply Technical data Article number: 6781190 SKU: 6781190-Tungaloy Manufacturer SKU: TUN6781190 Model series: ISO turning insert series Brand: Tungaloy Material: cemented carbide Facts Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 09 Clearance angle: 7° Included angle: 80° Special features CVD-coated carbide grade T9225 Rhombic insert form Central hole: cylindrical + one-sided countersink (40°–60°) Single-sided chipbreaker Application: turning (external and internal) Typical use: medium to heavy steel machining ISO-standardised geometry for holder compatibility FAQ What materials is this insert suitable for? The CCMT 09T308 T9225 turning insert is intended primarily for medium to heavy steel machining and performs well where intermittent cuts or variable engagement demand added toughness. How does the T9225 grade improve performance? The T9225 CVD-coated carbide offers a combination of wear resistance and toughness that maintains edge stability under fluctuating loads, extending useful tool life in demanding turning operations. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO geometry parameters (form, size, thickness and hole style) so compatibility with matching ISO toolholders is straightforward when correct tolerance classes and clamping elements are used. What does the single-sided chipbreaker provide in practice? The single-sided chipbreaker assists in producing controllable chips and supports a better surface finish during steel turning, aiding chip evacuation and reducing the risk of built-up edge. Can this insert be used for finishing passes? With its 0.8 mm corner radius and balanced grade, the insert can be used for finishing where machine rigidity and cutting parameters are appropriate; finer radii or adjusted feeds may be chosen for higher surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9225), robust 80° rhombic geometry and secure clamping to maintain stable chip formation and long tool life in medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT 09T308 T9225 ISO turning insert for medium-to-heavy steel — Tungaloy CCMT09T308 T9225 is an ISO-standard indexable turning insert designed for external and internal turning in steel; the rhombic form and specific chipbreaker make it suitable where intermittent cuts demand higher toughness. CVD-coated carbide grade T9225 Robust universal grade for steel turning 80° rhombic geometry with 7° clearance Consistent cut quality under changing engagement conditions The CVD-coated carbide composition (T9225) provides a balance of hardness and toughness that supports reliable metal removal when cutting conditions vary. As a ISO-standard indexable insert, it was developed for medium-to-heavy steel turning and performs well in slightly interrupted cuts where a tougher grade is needed. The single-sided chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and improving surface finish; at the same time the robust substrate helps to resist crater wear, extending productive tool life. Compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. Higher productivity with predictable tool life and secure clamping Designed for productive machining, the geometry and dimensions contribute directly to process stability: the 80° rhombic shape enables versatile cutting angles, the 0.8 mm corner radius increases edge strength for heavier cuts, and the plate thickness (3.97 mm) combines stiffness with economical use of insert material. The centre hole is cylindrical with a single-sided countersink (40°–60°) for secure mounting and repeatable positioning, which lowers setup variability and supports higher material removal rates. These measurable features translate into fewer tool changes and lower downtime in batch production. Easy integration into existing tool systems and selection guidance As part of the ISO turning insert series, the indexable plate integrates into common external holders or boring bars when the form, fastening and size are matched. When selecting a chipbreaker and grade, choose the variant that suits the workpiece material, machining strategy and lathe-spindle stability; for mixed or interrupted cuts, a tougher universal grade such as T9225 reduces the likelihood of chipping. For specific holder compatibility or to optimise the chipbreaker selection, Metav Werkzeuge can advise on matching the insert to the clamping set and replacement screws supplied with typical toolholders. Contact Metav Werkzeuge for tailored advice on Tungaloy turning solutions and to specify the CCMT09T308 T9225 for reliable medium-to-heavy steel turning—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780680 SKU: 6780680-Tungaloy Manufacturer SKU: TUN6780680 Model series: ISO-Drehwendeschneidplatten Shape designation: CCMT09T308 Manufacturer: Tungaloy Facts Angle: 80° Clearance: 7° Thickness: 3.97 mm Corner radius: 0.8 mm Size: 09 ISO code: 09T308 Special features CVD-coated carbide grade T9225 Rhombic insert form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard indexable turning insert series Suitable for external and internal turning Robust universal grade for medium-to-heavy steel FAQ What materials is this insert suitable for? The CCMT09T308 T9225 insert is formulated as a robust universal grade for steel machining and is intended for medium-to-heavy turning operations where toughness is required. How does the chipbreaker influence performance? The single-sided chipbreaker promotes stable chip formation under varying engagement conditions; with the T9225 composition, it helps maintain surface finish and reduces the risk of built-up edge during interrupted cuts. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening and insert size; the ISO series designation facilitates matching to standard external holders and boring bars. What does the centre hole configuration mean for clamping? The cylindrical centre hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping and simplifies positional accuracy when fitted to matching screws and clamp sets. Is this an original Tungaloy product and what is the SKU? Yes, the part is an original Tungaloy indexable insert, manufacturer article number 6780680 and SKU 6780680-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 UM 1115 Indexable Insert - Sandvik
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Features indexable inserts CCMT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT09T308UM1115-SANDVIK Data & Figures: ISO-Code: CCMT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-09T308-1115-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com