Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) for enhanced wear resistance and a CCMT120408 rhombic geometry with 0.8 mm nose radius for stable cutting performance in medium-steel turning; order directly via Metav Werkzeuge or request technical advice if required. CCMT120408 T9215 turning insert – Tungaloy The CCMT120408 T9215 is an ISO-format turning indexable insert engineered for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness. CVD-coated carbide (T9215) for high wear resistance ISO CCMT120408 rhombic insert with 0.8 mm nose radius Designed for medium-steel turning and reliable productivity Product grade that raises throughput in medium-steel turning The CVD-coated carbide grade T9215 delivers a hard, wear-resistant surface while maintaining core toughness, making it well suited for continuous to light interrupted cuts in medium-steel applications. As a CVD-coated substrate, the grade reduces flank and crater wear under typical turning feeds and speeds, which translates into longer tool life and less frequent index changes. For production-focused workshops, this means fewer tool interventions and more consistent cycle times—quality and economy combined. Geometry and clamping that enhances stability and repeatability The ISO CCMT120408 geometry denotes a standard rhombic shape with an included angle that supports a wide range of toolholder pockets. The insert’s 0.8 mm nose radius gives a predictable cutting edge for improved surface finish without overloading the tool, while the 7° clearance angle assists chip evacuation and reduces rubbing. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in compatible holders. Compatibility to a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching pocket design and clamping hardware is essential for optimal performance. Practical selection and machining advantages A single-sided chipbreaker in this indexable insert guides chips for controlled evacuation and reduced tool pressure peaks, which supports steady cutting and consistent surface quality. When paired with a correctly matched holder and clamping set, the grade and chip geometry minimise vibration and risk of edge chipping, particularly under slightly interrupted cuts. For operations seeking reproducible results, choosing this insert helps secure stable material removal rates and predictable tool-change intervals—advantages that improve overall process reliability and part quality. Contact Metav Werkzeuge for application advice on Tungaloy inserts, availability and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773991 Manufacturer SKU: TUN6773991 Merchant SKU: 6773991-Tungaloy Label: CCMT120408 T9215 Tungaloy-Wendeplatte Facts ISO designation: 120408 Insert form: CCMT (rhombic) Nose radius: 0.8 mm Clearance angle: 7° Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 80° Special features Coating: CVD-coated Grade: T9215 Material: carbide Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning of medium steels System components: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The CCMT120408 T9215 insert from Tungaloy is optimised for medium-steel machining and combines wear resistance with toughness for continuous to light interrupted cuts. Which toolholders fit the CCMT120408 geometry? Holders designed for ISO CCMT inserts with matching form, clearance angle, tolerance class, fastening method, size and thickness will accept this insert; check the holder pocket and clamping method before mounting. How does the T9215 coating affect tool life? The CVD-coated T9215 grade enhances wear resistance and reduces flank and crater wear on the carbide substrate, resulting in longer tool life under appropriate cutting parameters. Can this insert be used for finishing passes? Yes—thanks to the 0.8 mm nose radius and rhombic geometry, the insert provides a consistent surface finish when cutting conditions and holder rigidity are suitable. What role does the chipbreaker play for this insert? The single-sided chipbreaker controls chip formation and evacuation, lowering cutting forces and helping to maintain stability and predictable tool performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9215 Wendeplatten - Tungaloy
Benefit from a blend of CVD-coated carbide T9215, a 0.8 mm corner radius and a 7° relief angle that together deliver productive, wear-resistant performance for medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for application guidance. CCMT120408 T9215 CCMT 120408 T9215 — Turning insert, rhombic 12×4.76 mm by Tungaloy A CCMT120408 T9215 indexable turning insert engineered for medium steel applications, suitable for both external and internal turning in continuous to lightly interrupted cut conditions. CVD-coated carbide grade T9215 for steel Rhombic ISO CCMT120408 form, 12×4.76 mm 0.8 mm corner radius for robust edge life Suitable for external and internal turning High wear resistance for productive medium-steel machining The CVD-coated carbide composition of this insert (grade T9215) combines a protective ceramic layer with a tough substrate to increase wear resistance while maintaining breakage safety. This balance enables stable cutting in medium-steel applications and supports higher metal removal rates without frequent index changes. The single-sided chipbreaker promotes controlled chip formation, reducing the risk of entanglement and improving surface finish consistency. The result is measurable productivity gains and fewer unplanned tool changes in series production. Secure seating and ISO compatibility for predictable tool changes Designed to the ISO indexable insert family, the geometry and dimensions ensure compatibility with standard holders when form, relief angle, tolerance class, clamping method, size and thickness match. The rhombic plate shape and 80° seating angle combine with the cylindrical hole and single-side countersink (40°–60°) to deliver repeatable mounting and secure clamping. This repeatability reduces setup variance and contributes to process stability, making changeovers faster and reducing downtime in multi-shift operations. Edge strength and machining stability for demanding operations A 0.8 mm corner radius gives enhanced edge robustness for moderate depth cuts and aids resistance to edge chipping under variable loads. The modest 7° relief angle limits flank rubbing while keeping a positive cutting action for smoother engagement. With a plate thickness of 4.76 mm and a nominal size of 12 mm, the insert supports sufficient stiffness for routine turning tasks while the T9215 composition helps resist abrasive wear. Together, these characteristics yield consistent part quality and a reliable cutting edge life under continuous and slightly interrupted cutting regimes. Contact Metav Werkzeuge for stock availability and tailored application advice on Tungaloy CVD-coated carbide inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6774050 Manufacturer SKU: TUN6774050 SKU: 6774050-Tungaloy Name: CCMT120408 T9215 Tungaloy insert Facts Corner radius: 0.8 mm Size: 12 mm Thickness: 4.76 mm Relief angle: 7° Seat angle: 80° Hole style: with hole — cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: one-sided Application: external and internal turning on medium steel ISO form: CCMT120408 FAQ What materials is this insert intended for? This insert is specified for medium steel applications; the T9215 grade and CVD-coated carbide construction provide wear resistance and fracture safety for steel turning. Can the insert handle interrupted cuts? Yes, the insert is suitable for continuous to lightly interrupted cutting; the 0.8 mm corner radius and robust carbide substrate improve resistance to impact in such conditions. Which holder features are required for proper compatibility? Compatibility depends on matching the ISO form, relief angle, tolerance class, clamping method, size and thickness; the CCMT120408 shape, 7° relief and 4.76 mm thickness must be matched by the holder. How does the chip control perform on this grade? The single-sided chipbreaker on the CCMT120408 with T9215 provides consistent chip formation and evacuation for medium-steel turning, aiding surface finish and tool life. Is this an original Tungaloy article and where is it referenced? The insert is an original Tungaloy turning insert listed under manufacturer article number 6774050 and manufacturer SKU TUN6774050. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, robust 0.8 mm corner radius and ISO conformity for a stable, productive turning process; order the CCMT120408 T9215 insert directly via Metav Werkzeuge or consult our advisors for application support. CCMT 120408 T9215 turning insert – ISO indexable insert by Tungaloy CCMT120408 T9215 is an ISO-standard indexable insert designed for productive external and internal turning of medium steel materials. CVD-coated carbide grade T9215 0.8 mm corner radius for edge strength 80° rhombic form with 7° relief angle Cylindrical hole with 40°–60° countersink Consistent wear resistance for medium-steel turning The insert is manufactured in CVD-coated carbide, grade T9215, which delivers a balance of wear resistance and fracture toughness. This combination makes the tool particularly suitable for medium steel machining under continuous to slightly interrupted cutting conditions, improving run time between indexings. The coating reduces adhesion and flank wear while the carbide substrate maintains cutting-edge stability, so production runs can sustain higher productivity with fewer unplanned interruptions. Geometry that simplifies holder compatibility and clamping Defined by ISO form and dimensions, the rhombic 80° geometry and 7° relief angle ensure predictable seating in compatible toolholders. Compatibility is established by form, relief angle, tolerance class, fastening method, size and thickness; the insert’s rhombic shape and 4.76 mm thickness allow integration into common external holders and boring bars. The cylindrical hole with a single-sided countersink supports secure clamping and straightforward replacement, reducing setup time and risk of misalignment. Edge protection and chip control for production environments The 0.8 mm corner radius increases edge strength and reduces chipping during slightly interrupted cuts, while the one-sided chipbreaker assists consistent chip formation and evacuation on turning operations. These features together enhance surface finish and process reliability, translating to lower rework rates and more predictable tool life. In practice, the indexable insert forms part of a system comprising a matching holder, shim and clamping set plus replacement screws for efficient maintenance cycles. Practical benefits for workshop use and process planning As an ISO-standard insert, this product supports inventory rationalisation and easy replacement across multiple machines. The CVD coating and carbide construction afford longer service life in demanding batches, helping to lower total machining costs through fewer tool changes. For operations seeking reproducible results, the insert’s geometry and grade make it straightforward to specify cutting data and tolerances, while the standardised format aids cross-platform planning and tool management. For high-productivity turning with reliable wear resistance, request the Tungaloy CCMT120408 T9215 insert via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application advice and availability Technical Data Article number: 6772436 SKU: 6772436-Tungaloy Manufacturer SKU: TUN6772436 Label: CCMT120408 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core Data Size: 12 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Special features / Versions Shape: rhombic Hole: mit Loch Hole style: cylindrical hole + single-sided countersink (40°–60°) Grade: T9215 (CVD-coated carbide) Chipbreaker: one-sided Application: Drehen Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT120408 T9215 indexable insert is optimised for medium steel machining; the T9215 grade provides a blend of wear resistance and toughness suitable for continuous to slightly interrupted turning operations. How does the chipbreaker affect performance? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, improving surface finish and reducing the likelihood of recutting long chips in production cycles. Which holder features are required for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; ensure the toolholder accepts an ISO CCMT 120408 rhombic insert with the specified 7° relief and 4.76 mm thickness. Is the insert good for interrupted cuts? Yes—the carbide substrate combined with the 0.8 mm corner radius and CVD coating enhances fracture resistance and wear performance in continuous to slightly interrupted cutting situations. What is the manufacturer SKU and article number for ordering? The manufacturer SKU is TUN6772436 and the article number is 6772436 for the Tungaloy CCMT120408 T9215 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated T9225 grade combined with the ISO CCMT geometry for reliable medium to heavy steel turning; the insert’s 0.8 mm corner radius and single-sided chipbreaker provide secure performance under variable engagement conditions. Order the insert via Metav Werkzeuge or contact the consultants for application support. CCMT120408 T9225 — ISO turning insert for medium to heavy steel machining, Tungaloy CCMT120408 T9225 Tungaloy turning insert for ISO-compliant external and internal turning applications, designed for variable engagement and interrupted cuts CVD-coated carbide T9225 for steel machining Rhombic CCMT 120408 geometry 0.8 mm corner radius for robust cuts Single-sided chipbreaker for interrupted cuts Productivity through a wear-resistant grade The CVD-coated carbide T9225 is engineered as a universal, robust grade for the demands of medium to heavy steel machining. Its surface treatment increases wear resistance and keeps cutting edges stable across varying engagement conditions, which translates into longer tool life and fewer insert changes. This reliability supports higher productivity and reduces process interruptions, making it a sound choice where consistent removal rates and dependable edge behaviour are required. Geometry and clamping for stable, repeatable results The rhombic CCMT 120408 geometry with an 80° included angle and a 7° relief enables versatile approach angles while maintaining tool strength. The insert’s design, including the cylindrical hole with a one-sided countersink (40°–60°) and a 4.76 mm thickness, ensures secure clamping in compatible holders. These features reduce vibration and promote repeatable accuracy, so setups stay stable and workpiece tolerance compliance becomes easier to achieve in serial production. Better chip control and economical edge life Equipped with a single-sided chipbreaker and a 0.8 mm corner radius, the insert improves chip formation in interrupted and semi-stable cuts. The chipbreaker helps direct swarf away from the cutting zone, lowering recut risk and heat build-up. Combined with the T9225 grade’s toughness, this results in improved edge life and lower tooling cost per part — a tangible economic benefit for workshops focusing on throughput and consistent surface finishes. System compatibility and selection guidance The insert follows ISO standard dimensions, so compatibility with a suitable external holder, boring bar or support set is determined by shape, relief angle, tolerance class, fastening style, size and thickness. When selecting a combination, match the chipbreaker and grade to the workpiece material and machine stability. For interrupted cuts or unstable clamping, choose the T9225 grade and a robust holder to exploit the insert’s toughness; for finishing passes, consider smaller engagement and adjust feeds accordingly for improved surface quality. If assistance is needed to match holder type or cutting parameters, technical guidance is available. For specific application advice or to secure supply of the Tungaloy CCMT120408 T9225 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are available to recommend holders and parameters for best results. Technical data Manufacturer article number: 6781116 SKU: 6781116-Tungaloy Manufacturer SKU: TUN6781116 Model series: ISO turning inserts Designation: CCMT120408 T9225 Numbers / Core technical data Size (inscribed circle): 12 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° ISO code: 120408 Special features Material: carbide Coating: CVD Chipbreaker: single-sided Plate form: rhombic Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Grade: T9225, universal for medium to heavy steel machining FAQ What materials is this insert suitable for? The CCMT120408 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for variable engagement and lightly interrupted cuts. Does the insert fit standard CCMT toolholders? Yes, the insert follows ISO CCMT dimensions; compatibility with a holder depends on form, relief angle, tolerance class, fastening and plate thickness. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert improves chip control in interrupted and semi-stable cuts, lowering recut risk and helping to maintain consistent surface finishes. What benefit does the 0.8 mm corner radius bring? A 0.8 mm corner radius increases edge robustness for heavier cuts and improves edge life under varying engagement compared with finer radii. Is the Tungaloy grade suitable for automated production? The T9225 grade’s balance of wear resistance and toughness makes it reliable for automated and serial production where predictable tool life and consistent results are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of proven T9225 CVD-coated carbide toughness, ISO compatibility and a compact 0.8 mm corner radius for stable medium-to-heavy turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. CCMT 120408 T9225 indexable insert for turning — Tungaloy The CCMT120408 T9225 is an ISO‑standard indexable insert designed for turning applications, offering a robust universal grade and chip control for medium to heavy steel machining. CCMT120408 rhombic insert, 80° cutting angle T9225 CVD-coated carbide for medium–heavy steel 0.8 mm corner radius for reduced vibration Single-sided chipbreaker with cylindrical hole High-performance turning under variable conditions The CVD-coated carbide grade T9225 delivers a balanced combination of wear resistance and toughness suitable for medium to heavy steel machining, where interrupted cuts or changing engagement demand material resilience. As an indexable insert, it converts higher edge life into fewer tool changes and more productive cycles; the robust grade supports stable chip formation and predictable flank wear, which in turn reduces unplanned stoppages and contributes to a smoother production flow. The result is consistent part quality and improved process efficiency in both external and internal turning. Secure clamping, rigid geometry and operational stability Designed to the ISO insert standard, the plate form and fixing are decisive for holder compatibility: the fit depends on plate shape, relief angle, tolerance class, fixing method, size and thickness. The CCMT geometry with an 80° approach angle and a 7° clearance angle provides cutting stability and directional strength, while the 4.76 mm thickness increases resistance to bending and vibration. The cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping in compatible holders and supports repeatable positioning when rotating to a fresh cutting edge. Practical advantages and selection guidance for machinists The combination of a single-sided chipbreaker and rhombic shape offers versatility across common turning tasks while the 0.8 mm corner radius helps dampen chattering on less rigid set-ups. When selecting an insert grade and chipbreaker, prioritise workpiece material and cutting stability: the T9225 grade is a versatile choice for varying steel conditions and slightly interrupted cuts, translating into longer tool life and fewer interventions. For optimum results, pair the insert with a matched external holder or boring bar chosen for the plate form and thickness, and select cutting parameters that favour consistent chip evacuation and stable clamping. For reliable medium-to-heavy turning with Tungaloy's T9225 toughness, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781221 Manufacturer SKU: TUN6781221 SKU: 6781221-Tungaloy Designation: CCMT120408 Material: carbide Series: ISO indexable turning inserts Key figures Corner radius: 0.8 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Clearance angle: 7° Cutting angle: 80° Special features CVD‑coated carbide, grade T9225 Robust universal grade for medium to heavy steel Rhombic plate form (CCMT) Single-sided chipbreaker With cylindrical hole and one-sided countersink (40°–60°) ISO compatibility; fit determined by form, relief angle, tolerance class, fixation, size and thickness FAQ Which materials is this insert intended for? The CCMT120408 T9225 indexable insert is engineered primarily for medium to heavy steel machining; the T9225 grade offers the toughness required for varying engagement and lightly interrupted cuts. How does the hole and countersink design affect clamping? The cylindrical hole combined with a one‑sided countersink (40°–60°) provides secure, repeatable clamping in compatible holders and helps maintain correct seating under cutting loads for the CCMT120408 insert. What does the T9225 designation mean in practice? T9225 denotes a CVD‑coated carbide grade optimised for balanced wear resistance and toughness, offering dependable tool life and stable chip formation in demanding turning tasks. Can this insert be used for internal turning as well as external turning? Yes; the geometry and chipbreaker of the insert suit both external and internal turning, though holder selection and rigidity should be adapted to the specific operation to maintain stability. How should the corner radius and thickness influence process settings? A 0.8 mm corner radius reduces sensitivity to vibration compared with smaller radii, and the 4.76 mm plate thickness increases rigidity—both factors permitting slightly higher feed rates and improved edge life when the machine set-up is sufficiently rigid. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide cutting edge and the T9225 universal grade to ensure stable cutting in medium to heavy steel turning; the ISO conformity and defined geometry enable straightforward holder selection and fast indexable replacement. Order the insert directly via Metav Werkzeuge or request bespoke selection advice from their consultants. CCMT120408 T9225 — ISO indexable turning insert for turning by Tungaloy A CCMT120408 T9225 indexable insert designed for medium to heavy steel turning, offering robust cutting performance for interrupted cuts and variable engagement conditions. CVD-coated carbide for robust performance Universal T9225 grade for medium to heavy steel Rhombic CCMT form with 80° included angle 0.8 mm nose radius and 4.76 mm thickness Stable cutting for medium to heavy steel turning The CVD-coated carbide body in the T9225 grade provides a balance of toughness and wear resistance that is advantageous when machining steels under varying engagement conditions. As an indexable insert, it is intended to deliver consistent cutting behaviour during both continuous and lightly interrupted cuts, reducing the frequency of tool changes. The result is improved process stability and predictable surface quality when the tool is used in the appropriate application range. Clear compatibility and effortless toolset planning Manufactured to ISO dimensions and tolerances, the insert’s compatibility with holders depends on its geometry, 7° clearance, tolerance class, fixing method, size and thickness. This standardisation simplifies holder selection and inventory management: matching a rhombic CCMT insert to a corresponding external holder or boring bar ensures correct seating and clamping, which in turn secures repeatable cutting conditions and shorter setup times on the shop floor. Controlled chips and prolonged tool life The single-sided chipbreaker geometry supports reliable chip control when turning a wide range of steels. The chemical vapour deposition layer (CVD) on the carbide increases surface hardness and thermal resistance, which helps to maintain edge stability at elevated cutting speeds and prolongs tool life. For operators less familiar with coatings: CVD is a thin, hard layer applied in a controlled process that enhances wear resistance without significantly reducing substrate toughness. Practical benefits for daily workshop use The rhombic form with an 80° included angle and a 0.8 mm nose radius provides a versatile compromise between strength and surface finish, making the insert suitable for both external and internal turning tasks. Integration into a system is straightforward — insert, suitable external holder or boring bar, shim/clamp set and replacement screws — enabling fast replacement and minimal downtime. For specification assistance or to confirm suitability for a specific steel grade or turning strategy, Metav Werkzeuge can provide technical guidance. For robust, versatile steel turning choose Tungaloy’s T9225 grade — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781206 Manufacturer SKU: TUN6781206 Brand: Tungaloy Model series: ISO indexable turning inserts Type designation: CCMT120408 T9225 Application: Turning Material: Carbide Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade: T9225, universal for medium to heavy steel Cutting material/coating: CVD-coated carbide Plate form: rhombic (CCMT) Chipbreaker: single-sided Typical system: insert + external holder/boring bar + shim/clamp set + spare screws Suited for interrupted cuts and variable engagement conditions FAQ What steels is this insert suitable for? The CCMT120408 T9225 insert is engineered as a universal grade for medium to heavy steel machining and performs well under varying engagement conditions. How is the insert fixed to a holder? The insert is mounted in ISO-compatible holders; correct selection depends on the insert form, fixing method, tolerance class, size and thickness. What benefit does the CVD coating provide? The CVD coating increases surface hardness and thermal resistance, improving wear behaviour and supporting consistent performance at higher cutting speeds. Can the insert be used for interrupted cuts? Yes, the T9225 grade and robust geometry are chosen to cope with lightly interrupted cuts and fluctuating cutting conditions. What does the 0.8 mm radius mean for finish and strength? A 0.8 mm nose radius balances edge strength and achievable surface finish, offering a compromise suitable for many general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 UM 4315 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Specifications CCMT 120408 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UM4315-SANDVIK Figures for the tool: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-120408-4315-Sandvik 40END
CCMT 120408 UM 4415 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UM4415-SANDVIK Data/ Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-120408-4415-Sandvik 40END
CCMT 120408 UM 4425 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCMT 120408 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UM4425-SANDVIK ISO-Code: CCMT120408 Grade: 4425 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-120408-4425-Sandvik 40END
CCMT 120408 UR 4315 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UR4315-SANDVIK Data & Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-120408-4315-Sandvik 40END
CCMT 120408 UR 4335 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UR4335-SANDVIK ISO-Code: CCMT120408 Grade: 4335 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.8 Chip Breaker: UR Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-4335-Sandvik 40END
CCMT 120408 UR 4415 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Design details insert CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UR4415-SANDVIK Data/ Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-4415-Sandvik 40END
CCMT 120408 UR 4425 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications insert CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408UR4425-SANDVIK Facts for the tool: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-4425-Sandvik 40END
CCMT 120408 WM 1115 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM1115-SANDVIK Data/ Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-120408-1115-Sandvik 40END
CCMT 120408 WM 2015 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM2015-SANDVIK ISO-Code: CCMT120408 Grade: 2015 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.8 Chip Breaker: WM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-2015-Sandvik 40END
CCMT 120408 WM 3005 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM3005-SANDVIK Dataand Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 3005 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-3005-Sandvik 40END
CCMT 120408 WM 3210 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features for CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM3210-SANDVIK Facts / Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 3210 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-120408-3210-Sandvik 40END
CCMT 120408 WM 3225 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM3225-SANDVIK Data & Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-120408-3225-Sandvik 40END
CCMT 120408 WM 4305 Indexable Insert - Sandvik
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product features indexable inserts CCMT 120408 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM4305-SANDVIK Facts and Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4305 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-4305-Sandvik 40END
CCMT 120408 WM 4315 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM4315-SANDVIK Data/ Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-120408-4315-Sandvik 40END
CCMT 120408 WM 4415 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM4415-SANDVIK Facts and Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120408-4415-Sandvik 40END
CCMT 120408 WM 4425 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product details for CCMT 120408 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120408WM4425-SANDVIK Facts and Figures: ISO-Code: CCMT120408 Clearance Angle: 7° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-120408-4425-Sandvik 40END
CCMT 120412 3205 Indexable Insert - Sandvik
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Specifications for CCMT 120412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120412KR3205-SANDVIK ISO-Code: CCMT120412 Grade: 3205 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.2 Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-120412-3205-Sandvik 40END
CCMT 120412 4325 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications CCMT 120412 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT120412PM4325-SANDVIK Facts and Figures: ISO-Code: CCMT120412 Clearance Angle: 7° Thickness: 4,76mm Radius: 1.2 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-120412-4325-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com