Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 090408 AH6225 Wendeplatten - Tungaloy
Take advantage of the proven combination of a PVD-coated carbide grade and a robust geometry for consistent turning results on stainless steel; the insert’s stable cutting edge and double-sided chipbreaker support reliable mid-range machining. Order the CNMG090408 AH6225 Tungaloy turning insert directly via Metav Werkzeuge or consult the team for application matching. CNMG 090408 AH6225 Turning Insert – ISO CNMG, PVD-coated carbide by Tungaloy CNMG090408 AH6225 is an ISO‑standard turning insert designed for external and internal turning in industrial machining applications, offering a balance of sharpness and edge stability for varied operating conditions. CNMG 090408 ISO insert, rhombic form AH6225 PVD-coated carbide grade Optimised for stainless steel machining Double-sided chipbreaker, 0° clearance Consistent edge life and predictable wear for stainless steel The CNMG090408 AH6225 turning insert pairs a modern PVD coating with a proven carbide substrate to extend tool life under varying conditions. The AH6225 grade is developed as a universal solution for machining stainless steel, providing a stable cutting edge that reduces the frequency of index changes and helps maintain component tolerances. For customers evaluating cost of ownership, the result is fewer interruptions for tool changes and a lower total machining cost over the production run. Clear mounting and ISO compatibility for straightforward integration The insert follows ISO conventions for shape and sizing, simplifying holder selection and inventory management. With a 09 size, a plate thickness of 4.76 mm and a central bore in a cylindrical style, fitment depends on holder form, free angle, tolerance class, fastening method and dimensions. This standardisation enables easy replacement in compatible CNMG external holders or boring bars and reduces setup uncertainty in mixed-machine environments. Improved chip control and stable cutting geometry The rhombic CNMG geometry and double-sided chipbreaker promote consistent chip formation and evacuation during turning operations. The 0° clearance angle and a 0.8 mm corner radius contribute to balanced edge strength and surface finish when performing mid-range cuts. These design choices mean the insert performs reliably across interrupted cuts and variable feed rates, delivering reproducible part quality with reduced risk of edge chipping. Material and coating advantage for varying machining conditions The PVD coating enhances abrasive and built-up-edge resistance while preserving a sharp cutting profile, making the grade suitable for changing thermal and mechanical loads. The substrate and coating combination supports a broad material spectrum with a focus on stainless steel, offering a practical compromise between toughness and wear resistance. For production shops aiming for dependable performance, the insert supplies a stable baseline for process planning and repeatable outcomes. For Tungaloy turning applications, contact Metav Werkzeuge for availability and tailored machining advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6946851 Manufacturer SKU: TUN6946851 SKU: 6946851-Tungaloy Brand: Tungaloy Model series: ISO‑turning indexable inserts Designation: CNMG090408 AH6225 Core data Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Bore: cylindrical Special features PVD-coated carbide Universal grade for stainless steel Rhombic form (CNMG) Double-sided chipbreaker With bore for secure fastening Intended for turning (external and internal) FAQ Which materials is this insert best suited for? The CNMG090408 AH6225 Tungaloy turning insert is specified as a universal grade optimised for stainless steel and performs well in a range of similar alloyed steels under mid-range cutting conditions. How does the AH6225 grade affect machining performance? AH6225 is a PVD‑coated carbide grade designed to balance a sharp cutting edge with durability; the coating improves wear resistance while the substrate maintains toughness, resulting in predictable tool life for the CNMG insert. Is the CNMG090408 compatible with standard CNMG holders? Yes, the insert conforms to ISO CNMG dimensions; compatibility depends on holder form, free angle and fastening method, with the cylindrical‑bore design intended for secure mounting in appropriate external holders or boring bars. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker on this indexable insert supports consistent chip formation and evacuation, improving surface finish and reducing the chance of chip entanglement during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a universal AH6225 PVD-coated carbide grade, an ISO CNMG 090408 rhombic form and a double-sided chipbreaker for stable, repeatable stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG090408 AH6225 Tungaloy insert — ISO turning insert for stainless-steel machining The CNMG090408 AH6225 Tungaloy insert is an ISO-standard rhombic turning insert designed for external and internal turning, offering a 0° clearance angle and a balanced edge for medium machining conditions. ISO CNMG 090408 rhombic insert PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker for stable cutting 0.8 mm corner radius, 0° clearance angle Consistent machining quality for stainless steels The AH6225 grade is a PVD-coated carbide designed as a universal solution for stainless-steel applications, delivering a sharp yet stable cutting edge under varying conditions. The composition of the grade favours controlled wear and good edge integrity, which helps maintain dimensional accuracy across batch runs. Using this rhombic form contributes to a predictable chip flow and repeatable results when paired with a matching ISO turning holder. The combination of grade and geometry is particularly effective in shops that require a compromise between tool life and surface finish, enabling cost-effective production without sacrificing quality. Reliable chip control and secure clamping for productivity A double-sided chipbreaker and a cylindrical hole for secure screw fixation improve process reliability by guiding chips away from the cutting zone and ensuring stable clamping during interrupted cuts. Compatibility with the clamping system depends on insert form, free clearance angle, tolerance class, fixation type, size and thickness — these parameters ensure correct seating and repeatable run-out. The ISO system setup normally includes the insert, a suitable external holder or boring bar, a clamping pad/kit and replacement screws; this modular approach simplifies inventory management and reduces downtime for changeovers. Practical advantages in the workshop and application tips The 0.8 mm corner radius gives a balanced performance between edge strength and the ability to achieve decent surface finishes; the 4.76 mm plate thickness and rhombic geometry support moderate depths of cut in medium-duty turning. Select the chipbreaker style and grade according to material, machining mode and rigidity of the set-up: choose the AH6225 grade for variable stainless-steel work and aim for stable clamping and moderate cutting parameters to extend tool life. The ISO designation facilitates quick matching with standard toolholders, helping to streamline tool change procedures and improve overall process security while maintaining consistent surface quality. For machining tasks that demand a dependable balance of edge stability and versatility, contact Metav Werkzeuge for ordering and application advice regarding the Tungaloy CNMG090408 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and optimal cutting parameters. Technical data Article number: 6903160 Manufacturer SKU: TUN6903160 Our SKU: 6903160-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Geometry code: 090408 Included angle: 80° Clearance angle: 0° Special features Grade: AH6225 (PVD-coated carbide) Shape: CNMG 090408, rhombic insert Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO-standard holders and clamping kits FAQ What materials is this insert suitable for? The CNMG090408 AH6225 Tungaloy insert is formulated primarily for stainless-steel machining and performs well in a range of medium-duty turning operations where a stable, sharp cutting edge is required. How does the chipbreaker affect performance? The double-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of recutting; the insert’s geometry supports reliable chip flow during both continuous and interrupted cuts. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fixation type, size and thickness; the CNMG 090408 form fits standard ISO CNMG holders and compatible boring bars when used with the correct clamping pad and screws. What benefits does the AH6225 grade offer in practice? AH6225 provides a balance between edge sharpness and robustness for variable stainless-steel applications, helping to extend tool life while maintaining surface quality under changing cutting conditions. How should the corner radius influence parameter selection? The 0.8 mm corner radius offers improved edge strength for moderate depths of cut; select cutting speeds and feeds that match machine rigidity and workpiece stability to maximise life and surface finish with this radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH6225 Wendeplatten - Tungaloy
Combine the universal AH6225 PVD-coated carbide grade with the 80° rhombic geometry and a secure, hole-mounted clamping system for reliable machining of stainless steels. Order the CNMG090408 insert directly via Metav Werkzeuge or contact their consultants for tailored application guidance. CNMG090408 AH6225 Tungaloy indexable turning insert — PVD-coated carbide, 80° rhombic The CNMG090408 AH6225 is an ISO-standard turning insert designed for external and internal turning, optimised for medium machining of stainless steels and mixed production conditions. PVD-coated carbide grade AH6225 Optimised for stainless steels 80° rhombic geometry, 0° relief Double-sided chipbreaker, with hole Consistent cutting performance for stainless steels The insert delivers stable cutting thanks to its PVD-coated carbide composition and the AH6225 grade, which is designed for a sharp yet robust cutting edge. In practice, this means consistent surface quality and predictable tool life under variable batch conditions. The rhombic 80° geometry supports both axial and radial engagement, while the 0° relief reduces vibration in steady turning operations. The result is a dependable solution for shops that require repeatable results on stainless steels, with clear process advantages over uncoated alternatives. Secure tool clamping and straightforward tool matching Compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole and standard ISO dimensions simplify selection of the correct toolholder and clamping kit. The double-sided configuration permits economical indexing, and the central hole enables positive location and secure fixation. For production lines that must change inserts quickly, this design reduces downtime and ensures reproducible positioning, which supports high process reliability and fewer setup deviations. Versatile grade for mixed production and improved chip control The universal AH6225 grade is balanced for medium cutting conditions and varying materials, providing an advantageous mix of wear resistance and edge toughness. The integrated chipbreaker promotes controlled chip formation across different feeds and depths of cut, lowering the risk of chip entanglement and improving surface finish. For operations that alternate between small-batch prototypes and serial runs, the insert offers a pragmatic compromise between economy and performance, extending effective machining windows before regrinding or replacement is needed. Contact Metav Werkzeuge for application-specific recommendations and prompt supply of original Tungaloy CNMG090408 AH6225 inserts (SKU TUN6946872) from their central warehouse Technical data Article number: 6946872-Tungaloy Manufacturer SKU: TUN6946872 Manufacturer item number: 6946872 Facts Size designation: 09 Thickness: 4.76 mm Relief angle: 0° Cutting angle: 80° Corner radius: 0.8 mm Special features Material: carbide Coating / grade: PVD-coated, AH6225 Geometry: rhombic, with cylindrical hole Chipbreaker: double-sided Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The CNMG090408 AH6225 insert is optimised for machining stainless steels and performs well in mixed-production scenarios where a robust, versatile grade is required. How does the hole affect clamping and stability? The cylindrical hole provides positive location and secure clamping in compatible toolholders, improving repeatability and reducing the risk of insert movement during turning. Can the insert be indexed to extend service life? Yes, the insert is double-sided and indexable; both sides can be used to extend service life before disposal or reconditioning. Which holder features must be matched to ensure compatibility? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; selecting a holder with matching ISO geometry and clamping hardware is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated carbide grade, ISO-standard geometry and reliable chip control to keep turning processes productive and predictable. Order the insert directly via Metav Werkzeuge or contact the consultants for compatibility and application advice. CNMG 090408 AH6235 indexable insert for turning — Tungaloy CNMG090408 AH6235 indexable insert for ISO-format external and internal turning, designed for stainless steels and interrupted cuts ISO rhombic geometry CNMG 09 format AH6235 PVD-coated carbide grade 0° relief for robust engagement Double-sided chipbreaker with cylindrical hole Greater resistance to notch and chipping for stainless turning The CNMG090408 AH6235 indexable insert combines a PVD coating with a tougher carbide substrate to resist edge breakdown during the machining of stainless steels and other demanding alloys. The coating reduces built-up edge and improves wear behaviour, while the tougher substrate increases fracture resistance in interrupted cuts. This results in longer edge life and fewer unscheduled insert changes, supporting stable production and predictable maintenance intervals. Reliable chip control and secure clamping for consistent results A double-sided chipbreaker on a rhombic ISO geometry delivers consistent chip formation and evacuation in medium to heavy turning operations. The insert’s cylindrical hole and standard ISO dimensions ensure repeatable clamping with most ISO holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The 0° relief angle provides robust engagement at the cutting edge, improving workpiece finish and reducing vibration risks in less rigid setups. Pragmatic benefits for workshop productivity and process stability Selecting this grade and geometry translates into measurable production benefits: fewer tool changes, improved surface quality and better handling of interrupted cuts common in stainless-steel components. The double-sided design effectively doubles the available cutting edges per indexable insert, offering economical edge utilisation. For operations focused on repeatability and uptime, this insert supports higher first-pass yields and reduced rework, making it a practical choice for series turning and repair work. For application advice or to secure compatible holders and accessories, contact Metav Werkzeuge — the team can recommend the correct clamping and insert combination for the intended turning task Technical data Article number: 6903350 SKU: 6903350-Tungaloy Manufacturer SKU: TUN6903350 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 09 Included angle: 80° Relief angle: 0° Special features / Versions Grade: AH6235 Coating: PVD Material: carbide Shape: rhombic (CNMG) Hole: cylindrical, with hole Chipbreaker: double-sided Application: turning, suited to stainless steels and interrupted cuts ISO-format insert compatible with matching holders FAQ Which holder types are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance and fastening; the CNMG090408 AH6235 indexable insert fits ISO-compatible CNMG holders with matching size and clamping geometry Is this insert suitable for continuous turning of stainless steels? Yes, the AH6235 grade and PVD coating are optimised for stainless steels and deliver improved wear resistance for continuous as well as interrupted turning operations How many effective cutting edges does the indexable insert offer? The double-sided design provides two usable cutting edges per side when indexed according to the ISO geometry, extending effective edge life and reducing tooling costs What does the 0° relief angle mean in practice? A 0° relief angle gives a robust cutting engagement with reduced likelihood of edge chipping under heavy load; it supports stability in less rigid setups and during interrupted cuts Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015 for balanced wear resistance and edge stability, the double‑sided chipbreaker for consistent chip control, and ISO compatibility for straightforward toolholder selection. Order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMG 090408 AH8015 indexable turning insert — Tungaloy, PVD‑coated carbide, 80° geometry The CNMG 090408 AH8015 is an ISO‑standard indexable insert for general turning, designed primarily for machining heat‑resistant alloys and other demanding materials ISO‑standard CNMG insert, 090408 size PVD‑coated carbide grade AH8015 Double-sided chipbreaker for stable cutting 0.8 mm corner radius with cylindrical hole Predictable performance through a balanced carbide grade The PVD‑coated carbide grade AH8015 delivers a deliberate compromise between wear resistance and edge stability, making it a dependable choice for sustained turning operations of heat‑resistant alloys. The thin PVD layer increases surface hardness and reduces thermal softening at the cutting edge, which translates into extended tool life and fewer interruptions for tool changes. Combined with a double‑sided chipbreaker, the geometry supports stable chip formation under varying cutting conditions, helping to maintain surface finish quality and process consistency. ISO compatibility and design for secure clamping The rhombic 80° geometry and ISO CNMG form ensure interchangeability across compatible holders; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. This insert features a 0° clearance angle, a 0.8 mm corner radius and a cylindrical hole for positive locating and straightforward clamping. The plate thickness of 4.76 mm and the size designation 09 match common ISO toolholders, reducing the risk of mismatch and minimising setup time. Verifying holder compatibility by comparing these parameters before assembly supports reliable seating and repeatable cutting forces. Practical selection advice to increase productivity For best results in turning and internal operations, match the chipbreaker style and grade to the workpiece material, machining type and machine rigidity; the double‑sided breaker offers flexibility for both roughing and light finishing passes. Selecting the correct holder, underlay/washer and replacement screws as part of the system reduces vibration and improves tool life. The result is a more predictable process, fewer scrapped parts and improved throughput — advantages that contribute directly to lower part costs and higher shopfloor efficiency. For specification support or to secure supply of the CNMG 090408 AH8015 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data Article number: 6966102 SKU: 6966102-Tungaloy Manufacturer SKU: TUN6966102 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size designation: 09 Special features PVD‑coated carbide grade AH8015 Double‑sided chipbreaker Rhombic plate form Cylindrical hole for positive locating ISO‑standard indexable turning insert Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG 090408 AH8015 insert from Tungaloy is optimised for heat‑resistant alloys and general‑purpose turning where a balance between wear resistance and edge stability is required. How does the PVD coating affect performance? The PVD coating on the AH8015 grade increases surface hardness and thermal resistance, improving wear performance and reducing built‑up edge compared with uncoated grades. Which toolholder parameters must be checked for compatibility? Ensure the toolholder matches the CNMG form, the 80° geometry, the plate thickness (4.76 mm), size 09 and the clamping system that accommodates a cylindrical hole and the required tolerance class. Can the insert be used for both roughing and finishing? Yes; the double‑sided chipbreaker provides versatility that allows one face for heavier cuts and the other for finishing passes, subject to correct feed and speed selection. Is the 0.8 mm corner radius suitable for finishing work? A 0.8 mm corner radius offers a compromise between strength and surface finish; it provides a robust edge for medium feeds while still allowing acceptable surface quality in many finishing scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, PVD-coated carbide AH8015 and a 0.8 mm corner radius for consistent tool life and reliable machining of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090408 AH8015 — Tungaloy CNMG ISO turning insert for turning A CNMG 090408 AH8015 indexable insert designed for general turning applications, offering a rhombic geometry and PVD-coated carbide grade for balanced wear resistance and edge stability in heat‑resistant alloys ISO-standard rhombic CNMG geometry PVD-coated AH8015 for heat‑resistant alloys Double-sided insert with cylindrical hole Corner radius 0.8 mm for stable cutting Consistent productivity from PVD-coated carbide The PVD-coated AH8015 grade provides a measured balance between wear resistance and cutting-edge stability, especially when machining heat‑resistant alloys. As an ISO-standard insert, it integrates predictably into production chains, reducing setup variability and enabling consistent cycle times. The coating enhances thermal resistance so that higher cutting speeds become feasible without premature flank wear, resulting in a predictable tool life and fewer unscheduled tool changes. Geometry and mounting for reliable chip control The rhombic CNMG shape paired with a doppelseitig chipbreaker geometry allows reversibility and effective chip control in both external and internal turning. The central, cylindrical hole secures repeatable clamping and orientation on standard holders, while the 0° clearance angle and included 80° approach geometry support stable engagement with the workpiece. This combination reduces vibration and improves surface finish during conventional and semi-finishing passes. Practical benefits for workshop workflows With a corner radius of 0.8 mm and a plate thickness of 4.76 mm, the insert delivers a reliable contact area for stable cutting and predictable edge behaviour under moderate depths of cut. The double‑sided design halves tool cost per edge compared with single‑side alternatives. Compatibility with commonly used external holders and boring bars streamlines inventory and minimises adapter or holder changes, helping to keep downtimes short and throughput high. Choosing the right grade and application tips The AH8015 composition is recommended as a first choice for the general machining of heat‑resistant alloys where a compromise between wear resistance and edge toughness is required. For best results, pair the insert with a holder that matches the CNMG form, tolerance class and clamping method; select feeds and speeds taking into account the workpiece material and machine rigidity to exploit the insert’s balanced performance without over‑stressing the cutting edge. Contact Metav Werkzeuge today for a tailored recommendation on Tungaloy AH8015 inserts and to confirm compatibility with existing holders or specific machining tasks; Metav Werkzeuge can provide detailed application advice and delivery options. Technical Data Article number: 6946853 Manufacturer article number: 6946853 SKU Manufacturer: TUN6946853 Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Thickness: 4.76 mm Size: 09 ISO code: 090408 Special features Designation: CNMG090408 AH8015 Schneidstofftyp: PVD-coated cemented carbide Geometry: rhombic CNMG, double-sided Hole: with hole, cylindrical hole Typical use: external and internal turning Chipbreaker: double-sided Suitability: for heat-resistant alloys FAQ What materials is this insert suitable for? This CNMG 090408 AH8015 insert is primarily intended for the machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the PVD coating benefit cutting performance? The PVD-coated surface on the AH8015 grade offers improved thermal protection and reduced adhesion, which helps maintain edge integrity and extend the insert’s usable life under elevated cutting temperatures. Is the insert reversible and how does that affect cost? The double‑sided design allows the indexable insert to be rotated to a fresh edge, effectively doubling the number of usable cutting edges and lowering cost per edge compared with single‑edged inserts. Which holder types are compatible with this insert? Compatibility is determined by insert form, free angle, tolerance class, clamping and size; the CNMG090408 form fits standard CNMG external holders and boring bars when the holder matches the ISO specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH8015 grade and the ISO rhombic CNMG090408 geometry with a 0.8 mm cutting edge radius for stable, general-purpose turning of heat-resistant alloys; order or request application advice via Metav Werkzeuge. CNMG090408 AH8015 CNMG ISO rhombic turning insert for general turning – Tungaloy The CNMG090408 AH8015 is an ISO-standard rhombic turning insert designed for versatile external and internal turning in demanding materials, offering a balanced mix of wear resistance and edge stability. PVD-coated carbide AH8015 grade ISO rhombic CNMG 09 insert 0.8 mm cutting edge radius Double-sided chipbreaker, with cylindrical hole Reliable cutting performance for heat-resistant alloys The PVD-coated AH8015 grade provides a balance between wear resistance and cutting-edge stability, making this insert well suited for machining heat-resistant alloys and other demanding materials. The combination of a PVD coating and a robust carbide substrate reduces flank wear and helps preserve surface finish over longer tool life. In practice, this means consistent component quality during extended production runs and fewer unscheduled tool changes, improving overall machining efficiency. Designed for quick integration into ISO systems Compatibility with standard holders is determined by geometry, clearance angle, tolerance class, fixation method, size and thickness, and the CNMG090408 conforms to ISO norms for straightforward replacement. The rhombic plate form and the cylindrical hole allow secure clamping in a matching external holder or a boring bar; the double-sided design offers economical indexing. The system approach—insert, holder or boring bar, shim/clamp and replacement screws—ensures predictable clamping forces and repeatable set-up in production. Practical advantages in shop-floor use The relatively large 0.8 mm corner radius and the plate thickness of 4.76 mm contribute to edge strength and vibration damping during heavier cuts, while the 0° clearance supports stable cutting geometry in typical turning operations. Users benefit from a good compromise between robustness and the ability to achieve acceptable surface finishes without complex parameter changes. The insert’s ISO CNMG form simplifies stock management by matching widespread holder families. Clear benefits and user guidance Selecting the correct chipbreaker and grade for the workpiece and operation is essential; the double-sided chipbreaker here is suitable for a wide range of feeds and depths of cut in turning. For applications that demand higher stability or when machining particularly abrasive alloys, pairing this insert with a rigid holder and optimised cutting parameters improves tool life and process security. If further technical data or machining recommendations are required, Metav Werkzeuge provides application support and can advise on the ideal holder-insert pairing. Contact Metav Werkzeuge for tailored machining advice and reliable supply of Tungaloy CNMG090408 AH8015 inserts via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793718 Manufacturer SKU: TUN6793718 SKU: 6793718-Tungaloy Brand: Tungaloy Designation: CNMG090408 AH8015 Facts Angle: 80° Cutting edge radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° ISO code: 090408 Special features PVD-coated carbide (AH8015) Rhombic plate form (CNMG) Double-sided chipbreaker Cylindrical hole For turning (external and internal) FAQ What materials is this insert best suited for? The CNMG090408 AH8015 insert is formulated for general machining of heat-resistant alloys and similar demanding materials, with the AH8015 PVD-coated carbide offering a balance of wear resistance and edge stability. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fixation method, size and thickness; the ISO CNMG090408 designation ensures compatibility with standard CNMG holders and boring bars. What are the key dimensional specifications to check before fitting? Check the plate form (CNMG), corner radius (0.8 mm), thickness (4.76 mm) and the 80° included angle to ensure correct seating and clamping in the chosen holder. Can the insert be indexed and reused? Yes, the insert is double-sided with multiple usable edges; indexing provides economical use of the cutting material and predictable changeover. What advantages does the PVD coating provide? The PVD-coated AH8015 grade enhances surface hardness and wear resistance, improves flank wear behaviour and supports stable cutting performance during longer cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of proven ISO geometry, a PVD-coated AH8015 carbide grade and a 0.8 mm corner radius to ensure stable cutting and long edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG090408 AH8015 Tungaloy indexable insert — PVD-coated carbide for turning, 0.8 mm corner radius The CNMG090408 AH8015 Tungaloy insert is an ISO-indexed turning insert engineered for external and internal turning applications; its ISO CNMG geometry and PVD-coated grade suit machining of heat-resistant alloys. ISO CNMG090408 geometry for standard holders PVD-coated AH8015 carbide for heat-resistant alloys 0.8 mm corner radius for robust cutting edges Double-sided insert with cylindrical hole Consistent cutting performance for demanding turning The CNMG090408 AH8015 insert combines an ISO CNMG geometry with a PVD-coated AH8015 carbide grade, delivering a balance between wear resistance and edge stability. This composition makes the insert particularly suitable for the general machining of heat-resistant alloys, where thermal loads and edge degradation can limit productivity. The PVD layer reduces adhesive wear and helps maintain a predictable cutting behaviour at elevated temperatures, supporting longer uninterrupted runs and fewer insert changes. Shop-floor advantages that raise productivity A double-sided design and the presence of a cylindrical hole for secure clamping reduce tooling cost per cutting edge and simplify indexation. The 0.8 mm corner radius increases resistance to chipping and is advantageous for semi-finish turning where a robust edge improves cycle stability. The ISO standard form ensures broad holder compatibility; selecting the correct holder and clamping kit according to form, clearance and tolerance class enables consistent tool performance and quick changeover. Practical selection guidance for reliable results Compatibility depends on holder form, free/relief angle, tolerance class, clamping and plate thickness. The indexable plate is offered in the ISO series intended for turning; a matching outside holder or boring bar, appropriate shim/clamp set and fastening screw complete the system. Choose the chipbreaker and grade to match the workpiece, machining strategy and machine stability — the right combination reduces vibration, improves surface finish and lengthens insert life for predictable, cost-effective production. For reliable machining with Tungaloy’s AH8015 grade and ISO CNMG geometry, contact Metav Werkzeuge for tailored advice and fast supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6946673 Manufacturer SKU: TUN6946673 SKU: 6946673-Tungaloy Designation: CNMG090408 AH8015 Series: ISO turning indexable inserts Material: Carbide Grade: AH8015 Brand: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 09 Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Double-sided: yes Special features PVD-coated grade AH8015 Designed for heat-resistant alloys ISO CNMG090408 geometry Double-sided chipbreaker Compatibility determined by holder form, clearance, tolerance, clamping, size and thickness FAQ Is this insert suitable for heat-resistant alloys? The CNMG090408 AH8015 Tungaloy indexable insert (SKU 6946673-Tungaloy) is specified as a first choice for general machining of heat-resistant alloys due to its balanced wear resistance and edge stability. Can the insert be used for both external and internal turning? Yes, the insert is intended for external and internal turning; compatibility with a given holder or boring bar must be checked to ensure proper form, free angle and clamping. What advantage does the 0.8 mm corner radius offer? A 0.8 mm corner radius provides a robust cutting edge that resists chipping, improving stability in semi-finish operations and during interrupted cuts. Is the insert reversible and how does that affect cost? The insert is double-sided, allowing a second cutting edge to be used after indexing; this reduces cost per edge and extends productive tool life. How to ensure correct clamping and fit in the holder? Check holder compatibility against the ISO CNMG090408 form, the relief (free) angle, tolerance class, clamp system and plate thickness; proper clamping and a matching shim or clamp set ensure secure fixation and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide wear resistance and ISO-standard geometry for consistent turning of heat-resistant alloys; the balanced AH8015 grade offers stable cutting-edge life and wide material coverage. Order genuine Tungaloy inserts via Metav Werkzeuge or request application advice from our consultants for fast availability and reliable tool pairing. CNMG090408 AH8015 carbide turning insert — ISO rhombic, 80° included angle — Tungaloy The CNMG090408 AH8015 is an ISO-standard rhombic turning insert designed for general turning, offering a balanced mix of wear resistance and cutting-edge stability for machining heat-resistant alloys. PVD-coated carbide for heat-resistant alloys ISO CNMG 090408 rhombic geometry 0.8 mm corner radius for versatility Double-sided with cylindrical hole 4.76 mm plate thickness for rigidity Consistent geometry for repeatable turning performance The rhombic ISO form with an 80° included angle and 0° relief angle ensures predictable contact geometry and stable chip flow during external and internal turning. The standardised shape facilitates interchangeability across compatible holders; compatibility is governed by form, relief angle, tolerance class, fastening, size and plate thickness, enabling straightforward replacement and reduced setup time. Predictable geometry contributes directly to process stability and machining accuracy. Balanced grade optimised for heat-resistant alloys The AH8015 grade is a PVD-coated carbide selected as a first choice for general machining of heat-resistant alloys, balancing wear resistance with edge stability. This combination extends tool life under elevated cutting temperatures while maintaining surface quality. The moderate corner radius of 0.8 mm offers a compromise between strength and sharpness, supporting both finishing and light roughing operations with reduced risk of edge chipping. Practical design that supports secure clamping and rigidity The insert is double-sided and supplied with a cylindrical hole, compatible with a wide range of external holders and boring bars when the holder matches the ISO form and dimensions. The 4.76 mm plate thickness provides mechanical rigidity, lowering vibration sensitivity and enabling stable machining when paired with appropriately rated toolholders. Clear mechanical interfaces reduce assembly time and enhance repeatability across tool changes. Process advantages and productivity gains Using a wear-resistant PVD-coated grade with stable cutting-edge geometry reduces downtime for insert changes and contributes to consistent part quality. The double-sided design doubles indexable life per insert, while ISO conformity simplifies inventory management. Together, these attributes support economical production runs and predictable maintenance intervals, translating into lower cost per component and improved throughput. Contact Metav Werkzeuge for tailored application advice or to source genuine Tungaloy CNMG090408 AH8015 inserts and ensure optimal tool-holder pairing Technical data Article number: 6946875 Manufacturer SKU: TUN6946875 SKU: 6946875-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Size: 09 Special features PVD-coated carbide (AH8015) Double-sided insert with chipbreaker Rhombic plate form With cylindrical hole Application: Turning ISO-series insert; compatibility requires matching holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The AH8015 grade on the CNMG090408 insert is designed primarily for machining heat-resistant alloys, offering a balance of wear resistance and edge stability suitable for a wide range of alloyed materials. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius on the CNMG090408 insert provides increased edge strength compared with smaller radii, allowing light roughing and finishing with reduced chipping risk while maintaining acceptable surface finish. Is the insert compatible with standard CNMG holders? Yes, the CNMG090408 conforms to ISO geometry; compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness as specified by the toolholder manufacturer. Does the insert come pre-coated and what is the coating type? The insert is supplied in the AH8015 specification, which is a PVD-coated carbide grade engineered for enhanced wear resistance during machining of heat-resistant alloys. How does the plate thickness influence performance? The 4.76 mm plate thickness increases stiffness and reduces vibration sensitivity, supporting stable cutting conditions when used with appropriately rated holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance and edge stability offered by the AH8015 grade, together with ISO compatibility for straightforward integration into standard holders; order directly via Metav Werkzeuge or contact our advisors for cutting-data support. CNMG090408 AH8015 ISO turning insert for turning by Tungaloy — rhombic 09, 0.8 mm corner radius, 80° A CNMG090408 AH8015 insert designed for ISO‑compliant external and internal turning, optimised for heat‑resistant alloys and everyday workshop productivity ISO‑standard CNMG090408 insert, 80° included angle AH8015 PVD-coated carbide for heat-resistant alloys Rhombic 09 form with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole, 4.76 mm thick Higher productivity through balanced grade and coating The AH8015 grade is a PVD‑coated carbide engineered as a first choice for the machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability. This balance reduces unexpected tool changes and supports longer uninterrupted machining cycles, which leads to improved throughput. The coating enhances resistance to adhesive and abrasive wear at elevated temperatures, so the insert maintains performance where uncoated grades would deteriorate quickly. Simple integration with ISO tooling systems Manufactured to the ISO series format, the insert matches the critical parameters that determine holder compatibility: form, relief angle, tolerance class, clamping style, size and thickness. The rhombic 09 geometry with an 80° included angle and 0° free angle makes the component straightforward to fit into many standard external holders and boring bars. The cylindrical hole facilitates secure clamping and repeatable positioning, while the 4.76 mm thickness provides the mechanical support needed for stable cutting in interrupted or heavy cuts. Consistent chip control and surface quality The double‑sided chipbreaker reduces chip size and stabilises the cutting process, resulting in more consistent surface finishes and less time spent on secondary operations. The 0.8 mm corner radius strengthens the cutting edge, improving edge life under higher feed rates and more demanding conditions. Where fine surface finish is essential, selecting appropriate feeds and a matching chipbreaker style will deliver the required balance between tool life and finish quality. Practical application guidance for workshop use Intended primarily for turning, the insert performs well in both external and internal operations when paired with a suitable external holder or boring bar and properly selected cutting parameters. The system approach—insert, holder, clamp set and replacement screws—ensures secure assembly and repeatable results. For shops processing heat‑resistant alloys, the AH8015 choice reduces rework and increases uptime; for other materials, choose the chipbreaker and cutting data matched to the workpiece for optimal results. Contact Metav Werkzeuge today for tailored cutting data, rapid availability of Tungaloy CNMG090408 AH8015 turning inserts and practical advice for integration into existing tool systems Technical data Article number: 6946755 Manufacturer SKU: TUN6946755 SKU: 6946755-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Application: Turning Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 09 Included angle: 80° Free angle: 0° Special features Coating: PVD Grade: AH8015 Shape: Rhombic Hole: Cylindrical hole Chipbreaker: Double-sided chipbreaker Form designation: CNMG090408 FAQ What materials is the insert optimised for? The AH8015 grade on the CNMG090408 insert is optimised for machining heat‑resistant alloys; matching chipbreaker and cutting data is recommended when processing other materials. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength and tool life under heavier feeds, while producing a slightly more robust surface finish compared with smaller radii. Is this insert reversible and how is it clamped? Yes, the insert is double‑sided and designed for reversible use; the CNMG090408 AH8015 turning insert features a cylindrical hole for secure, repeatable clamping. How is compatibility with toolholders determined? Compatibility is determined by form, free angle, tolerance class, clamping method, size and thickness; the ISO‑compliant CNMG090408 designation aids correct holder selection. What does the designation CNMG090408 indicate? The designation indicates a rhombic CNMG geometry with an insert size 09, a 0.8 mm corner radius and the 04× thickness series (4.76 mm), matching ISO standards for turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD‑coated carbide (AH8015) and an ISO‑standard CNMG format for reliable turning of heat‑resistant alloys; the double‑sided chipbreaker and cylindrical hole ensure economical clamping and simple indexability. Order the CNMG090408 AH8015 insert directly via Metav Werkzeuge or consult our technical team for application advice. CNMG090408 AH8015 CNMG indexable insert for turning by Tungaloy — PVD‑coated carbide, double‑sided chipbreaker CNMG090408 AH8015 is an ISO‑standard rhombic insert designed for general turning applications where a balanced combination of wear resistance and edge stability is required ISO‑standard rhombic CNMG insert PVD‑coated AH8015 carbide grade For heat‑resistant alloys and general turning Double‑sided chipbreaker for cost efficiency Cylindrical hole for secure clamping Consistent cutting performance for heat‑resistant alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for the general machining of heat‑resistant alloys, delivering a balance between wear resistance and edge stability. This composition supports sustained cutting conditions common in aerospace, power generation and other high‑temperature alloy work, helping to maintain dimensional accuracy and surface quality over longer tool life. Where high thermal loads occur, the coating reduces flank wear and helps preserve the cutting edge for predictable tool‑change intervals. Reliable fit and secure clamping reduce setup variability The rhombic CNMG format conforms to ISO dimensions, so compatibility with external holders is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert features a cylindrical hole for consistent clamping and a corner radius of 0.8 mm, which offers a compromise between toughness and surface finish. The plate thickness 4.76 mm and the 80° insert angle aid in stable engagement during both external and internal turning, reducing chatter and contributing to repeatable results on standard CNMG toolholders. Economic machining through indexability and chip control Being double‑sided with a dedicated chipbreaker on each usable edge, this insert doubles the available cutting edges before replacement, lowering per‑edge cost and improving process economy. The integrated chipbreaker is matched to general turning tasks; when paired with a suitable holder and cutting parameters, it promotes controlled chip formation and evacuation. The combination of a robust substrate and PVD coating reduces unplanned interventions, supporting higher productivity and predictable throughput in serial and batch production. Practical selection and handling advice for secure results For best results, choose a chipbreaker and grade that match the workpiece material, machining mode and system rigidity; the AH8015 grade is particularly suited for alloys that demand thermal resilience. Confirm holder compatibility by checking form, free angle and tolerance class rather than relying solely on nominal ISO designation. Inserts are reversible; ensure correct orientation and torque for clamping screws to prevent slippage. If further machining data or parameter recommendations are required, technical advice is available to align insert choice with cycle‑time and surface‑finish targets. For tailored advice on applying the CNMG090408 AH8015 Tungaloy indexable insert or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge for application support and ordering assistance. Technical data Article number: 6750468 Manufacturer SKU: TUN6750468 Product name: CNMG090408 AH8015 Tungaloy insert Facts Size designation: 09 Corner radius: 0.8 mm Thickness: 4.76 mm Relief angle: 0° Insert angle: 80° Hole style: cylindrical Special features PVD‑coated carbide (AH8015) Double‑sided chipbreaker ISO‑standard rhombic format (CNMG) For turning of heat‑resistant alloys Compatible with standard CNMG holders FAQ What materials is this insert suitable for? This CNMG090408 AH8015 insert is intended primarily for heat‑resistant alloys and general turning applications where a balance of wear resistance and edge stability is required. How many usable cutting edges does the insert provide? The CNMG090408 AH8015 Tungaloy insert is double‑sided, offering multiple usable edges before replacement to improve cost efficiency. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this radius balances edge strength and surface finish, influencing feed and cutting‑force requirements during turning. Is the insert compatible with standard CNMG holders? Yes, the insert follows ISO CNMG dimensions; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. What does the AH8015 designation mean? AH8015 denotes a PVD‑coated carbide grade chosen for a combination of wear resistance and cutting‑edge stability, especially for higher‑temperature alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015, a 0.8 mm corner radius and robust edge stability to maintain consistent turning performance on heat‑resistant alloys; order directly via Metav Werkzeuge or contact the consultants for compatibility advice. CNMG090408 AH8015 ISO turning insert (rhomboid, PVD‑coated) by Tungaloy A CNMG090408 AH8015 rhombic turning insert for external and internal turning, optimised for heat‑resistant alloys and general turning operations PVD-coated carbide grade AH8015 ISO CNMG 090408 rhombic insert Double-sided with cylindrical hole Balanced wear resistance and edge stability Durable grade for heat‑resistant alloys and general turning performance The AH8015 grade is a PVD‑coated carbide formulation developed as a first choice for machining heat‑resistant alloys. The coating and substrate balance wear resistance with cutting‑edge stability, which reduces unexpected tool changeovers and keeps cycle times predictable. For workshops processing high‑temperature alloys, this insert offers reliable flank and crater wear behaviour that supports longer uninterrupted runs and helps stabilise overall production efficiency. Geometry and system compatibility that simplify tool selection With a rhombic form, 0° clearance, an 80° main angle and a 0.8 mm corner radius, the insert delivers a predictable cutting profile and good access for external and internal turning tasks. Compatibility with holders is determined by form, clearance, tolerance class, fixing method, size and thickness; the insert integrates into standard ISO systems alongside a matching outside holder or boring bar, shim/clamping set and spare screws. Clear geometry reduces setup time and simplifies tool inventory management. Practical benefits for workshop productivity and quality The double‑sided design and cylindrical locating hole permit economical use and secure clamping, while the nominal thickness of 4.76 mm and insert size 09 provide mechanical stiffness for stable cutting. The balanced edge stability of the grade minimises edge chipping on interrupted cuts and supports consistent surface finish and dimensional accuracy. For operations prioritising repeatability and low variance, this insert contributes directly to improved process control and fewer in‑process rejects. For tailored advice on holder compatibility, stock availability or application‑specific recommendations contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMG090408 AH8015 turning insert and matching toolholders. Technical data Article number: 6966088 SKU: 6966088-Tungaloy Manufacturer SKU: TUN6966088 Model series: ISO turning inserts Core specifications Insert designation: CNMG090408 Grade/sort: AH8015 Material: carbide Thickness: 4.76 mm Insert size: 09 Corner radius: 0.8 mm Main angle: 80° Clearance angle: 0° Hole: with hole (cylindrical) Features & compatibility PVD‑coated carbide grade AH8015 Rhombic insert, double‑sided chipbreaker Suitable for external and internal turning Compatibility via form, clearance, tolerance class, fixing, size and thickness System components: insert, outside holder/boring bar, shim/clamping set, spare screws Typical application: machining heat‑resistant alloys and general turning FAQ What materials is this insert best suited for? The CNMG090408 AH8015 insert is formulated for machining heat‑resistant alloys and covers a broad range of general turning applications where a balance of wear resistance and edge stability is required. How is the insert clamped in the toolholder? This rhombic, double‑sided insert locates via a cylindrical hole and is secured by the holder’s clamping screw and shim/clamping set compatible with ISO turning systems. Can the edge radius be used for finishing passes? The 0.8 mm corner radius provides a compromise between strength and finish; it is suitable for semi‑finishing and programmes that require stable cutting with good surface integrity. Is the grade PVD coated and what benefit does that bring? Yes, the AH8015 is PVD‑coated, which enhances wear resistance and helps maintain cutting‑edge integrity during elevated temperatures and sustained cutting. Which components are required to assemble a working system? A complete turning system comprises the insert, a matching outside holder or boring bar, the appropriate shim/clamping set and spare screws; compatibility depends on form, clearance, tolerance class, fixing, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AT9530 Wendeplatten - Tungaloy
Take advantage of consistent surface quality, uniform wear behaviour and ISO compatibility in one proven insert; the AT9530 coating and cermet cutting material deliver productive finishing cycles. Order the CNMG090408 AT9530 turning insert directly via Metav Werkzeuge or consult our technical advisors for tailored application support. CNMG090408 AT9530 Turning insert by Tungaloy A CNMG090408 AT9530 ISO-compliant turning insert designed for finishing and light turning of steel, offering controlled chip formation and a focus on surface integrity. ISO‑compliant CNMG090408 geometry AT9530 coated cermet grade Double-sided chipbreaker for stable chips Optimised for finishing and light turning High-quality finishing performance for demanding steel turning The rhombic geometry, combined with the AT9530 coated cermet grade, is engineered to produce a superior surface finish while maintaining steady wear behaviour. In practical terms, this means fewer part reworks and a more predictable tool lifetime when carrying out light cuts and finishing passes. The specification emphasises controlled cutting action and thermal stability typical of cermet coatings, which helps keep dimensional accuracy and visual part quality consistent across production batches. Compatibility and mounting that support efficient tool changes Designed as an ISO‑standard insert, compatibility with existing holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 0° relief angle and rhombic shape require matching clamping geometry; the presence of a cylindrical hole also affects the choice of clamping screw and support pad. Specifying compatible holders and clamping sets ensures secure fixing, repeatable seat location and minimal setup time, supporting uninterrupted machining processes. Practical material guidance and chip control explained This insert is tailored for steel finishing: the AT9530 coating promotes uniform wear and a fine surface texture, while the double-sided chipbreaker contributes to controlled chip segmentation and evacuation. The combination of a 0.8 mm corner radius and a 4.76 mm plate thickness balances edge strength with the ability to achieve fine surface profiles. For less experienced users, remember that chipbreaker selection must match workpiece material, cutting depth and machine rigidity to achieve the intended benefits. For precision finishing with Tungaloy’s AT9530 cermet insert, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6773688 Manufacturer SKU: TUN6773688 Vendor SKU: 6773688-Tungaloy ISO designation: CNMG090408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Main angle: 80° Relief angle: 0° Hole style: cylindrical hole Special features Grade: AT9530 (coated cermet) Carbide body Double-sided chipbreaker ISO turning insert series Rhombic plate form (CNMG) Suitable for finishing and light turning of steel FAQ What operations is this insert best suited for? The CNMG090408 AT9530 turning insert by Tungaloy is optimised for finishing and light turning operations on steel where surface quality and uniform wear are priorities. Which workpiece materials can be machined with this grade? The AT9530 coated cermet grade is intended primarily for steel finishing; it offers improved surface integrity and consistent wear when used in appropriate finishing parameters. How can compatibility with existing holders be ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; check the holder geometry against the CNMG090408 dimensions and the presence of a cylindrical hole before fitting. What chip control features does the insert provide? The double-sided chipbreaker on the CNMG090408 supports stable chip formation and evacuation, aiding consistent cuts and reducing the risk of built-up edge during finishing passes. What are the relevant geometric details to note before setting up? Key dimensions are a 0.8 mm corner radius, 4.76 mm plate thickness and an 80° main angle; the insert also has a 0° relief angle and a cylindrical locating hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet GT9530 grade and the robust ISO CNMG090408 geometry to achieve consistently high surface quality and extended cutting life; order directly via Metav Werkzeuge or consult the product specialists for holder and chipbreaker selection. CNMG090408 GT9530 Tungaloy indexable insert — ISO turning insert for turning A CNMG090408 GT9530 indexable insert engineered for finishing to light universal turning of steel, delivering improved surface finish and reliable wear resistance in stable machining conditions Coated cermet GT9530 for extended tool life ISO CNMG 09, rhombic 80° geometry Double-sided insert with cylindrical hole 0° relief angle and 0.8 mm corner radius Enhanced finish and predictable tool life The coated cermet GT9530 grade is formulated for finishing and light universal turning, combining a wear-resistant cermet substrate with a tailored coating to reduce abrasive wear and maintain edge integrity. In practice this translates into a more consistent surface finish and longer intervals between indexings when machining steel under stable conditions. Cermet inserts excel where fine surface quality matters: the hardened surface of the cermet matrix resists adhesion and maintains a keen cutting edge, while the coating further postpones flank wear. Compatibility with ISO holders is ensured by the standard CNMG geometry and specified thickness. Stable geometry for versatile turning operations The rhombic 80° geometry and the standard CNMG form permit both external and internal turning with effective access to shoulders and contours. The 0° relief angle suits rigid set-ups where minimal tool overhang and high stability are priorities, enabling repeatable dimensional tolerance and surface control. The double-sided design provides two cutting edges per indexed side, while the cylindrical central hole ensures secure clamping and consistent seat location. For optimum results, select the chipbreaker and grade variant that align with workpiece stability and the intended cut depth. Practical handling that reduces downtime A thickness of 4.76 mm and a 0.8 mm corner radius provide a good balance between edge strength and the ability to produce fine finishes; the corner radius stabilises the cut and helps avoid chatter in steady conditions. The CNMG format, combined with double-sided use, reduces tooling costs by increasing edge economy and simplifying spare-part management. Replacement is straightforward: the insert, holder, clamp and screws form the system and can be serviced without complex adjustments, which lowers machine downtime and contributes to predictable production cycles. Brand performance and process reliability Made by Tungaloy, the insert benefits from a manufacturing approach that emphasises consistent cutting-edge quality and modern grade development. The combination of a cermet substrate and applied coating supports reliable wear behaviour and repeatable machining performance across production runs. For operations prioritising surface quality and extended edge life in turning steel, this insert presents a processing-stable solution that complements productivity goals while maintaining cost-efficiency. Contact Metav Werkzeuge for tailored advice on holder compatibility, chipbreaker selection and batch supply for the Tungaloy CNMG090408 GT9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6710242 Manufacturer SKU: TUN6710242 Designation: CNMG090408 Manufacturer: Tungaloy Material / substrate: carbide Grade / coating: GT9530 (coated cermet) Facts Size designation: 09 Plate thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 80° Relief angle: 0° Hole style: cylindrical Special features Rhombic plate form Double-sided chipbreaker ISO-standard turning insert Compatible with matched CNMG holders Suitable for finishing and light universal turning of steel FAQ What workpiece materials is this insert designed for? This insert is intended primarily for machining steel in finishing to light universal turning applications, utilising the GT9530 coated cermet grade for improved surface finish and wear resistance. How many usable cutting edges does the insert provide? The double-sided construction gives multiple usable edges; each side can be indexed to provide additional cutting edges before replacement is required. Which geometry and holder features are required for compatibility? Compatibility depends on matching the CNMG shape, 80° geometry, plate thickness, relief angle and clamping style; use a holder designed for CNMG inserts with a cylindrical-clamping arrangement. What finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and surface quality, delivering consistent finishes while reducing the risk of edge chipping in stable set-ups. How is the insert secured in the toolholder? The insert uses a central cylindrical hole and standard clamp/screw fixation; proper torque and a matching clamping seat ensure repeatable location and secure fixation Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 coating, precise CNMG090408 geometry and reliable ISO compatibility to improve finishing results and extend tool life; order directly via Metav Werkzeuge or consult their technical team for application-specific advice. CNMG 090408 GT9530 Turning Insert (CNMG090408) by Tungaloy — Coated Cermet for Finishing A CNMG090408 GT9530 indexable turning insert engineered for external and internal turning, offering a wear-resistant coated cermet grade for improved surface finish and extended life in stable machining conditions Coated cermet grade GT9530 Rhombic 80° insert geometry 0° clearance, 0.8 mm nose radius Double-sided chipbreaker with cylindrical hole Consistent finishing and extended tool life with GT9530 The GT9530 grade is a coated cermet designed for wear resistance during finishing and light universal turning of steel. The cermet substrate delivers a fine edge stability that supports improved surface quality, while the coating enhances resistance to abrasive wear. As a result, operators benefit from fewer interruptions for insert changes and more predictable component tolerances. The combination of a refined substrate and protective coating makes this insert particularly suitable where surface finish and tool life are prioritised over aggressive material removal rates. Precision geometry for reliable clamping and stable results The CNMG090408 format uses a rhombic 80° geometry and a 0° clearance angle that together enable stable engagement in both external and internal turning operations. The 0.8 mm nose radius balances edge strength and finishing capabilities: a larger radius increases process stability and surface integrity, while still allowing accurate form turning when required. Compatibility with ISO toolholders is determined by form, clearance, tolerance class, fastening method, size and thickness, ensuring straightforward integration into existing toolsets and reducing setup time. Practical benefits and application guidance for production use The double-sided chipbreaker and cylindrical hole allow economical indexing of available cutting edges and secure fixing in matched holders. Under stable clamping and machine conditions this grade performs best in finishing to light universal turning of steel, where consistent chip control and a high-quality surface are required. Select an appropriate chipbreaker and holder matching the insert’s specifications to exploit the coated cermet advantages; when in doubt, Metav Werkzeuge’s specialists can advise on holder compatibility, grade selection and process parameters to raise productivity and reduce cycle-time variability. Contact Metav Werkzeuge for tailored advice on GT9530 cermet inserts and application optimisation — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer article number: 6797214 SKU: 6797214-Tungaloy Manufacturer SKU: TUN6797214 Model series: ISO turning indexable inserts Grade/coating: GT9530 Material: cemented carbide Facts Insert designation: CNMG090408 Insert size: 09 Insert thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Nose radius: 0.8 mm Special features Rhombic insert shape (CNMG) Double-sided chipbreaker With cylindrical hole for positive fixing Coated cermet for finishing/light universal turning of steel ISO compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What applications suit this insert best? The CNMG090408 GT9530 insert is intended for external and internal turning, especially finishing and light universal operations in steel where a fine surface finish and longer tool life are required. Which material grade does the insert use? This insert uses the GT9530 coated cermet grade, formulated for wear resistance and improved surface quality during finishing cuts. How is compatibility with toolholders determined? Compatibility is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures proper clamping and performance. Does the insert include a hole and what type is it? Yes — the insert is supplied with a cylindrical hole, designed for secure fixation in compatible indexable toolholders. Is the insert suitable for roughing? The GT9530 grade is optimised for finishing and light universal turning rather than heavy roughing; for heavy material removal a tougher grade is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance and ISO compatibility for reliable finishing and extended tool life; the stable geometry and double-sided chipbreaker reduce downtime and operating costs. Order original Tungaloy inserts directly via Metav Werkzeuge or consult the team for application-specific guidance. CNMG 090408 GT9530 Tungaloy Turning Insert — Coated Cermet, 0.8 mm Corner Radius CNMG 090408 GT9530 is an ISO-standard rhombic turning insert designed for precision external and internal turning in stable machining conditions Coated cermet grade GT9530 ISO CNMG 090408 rhombic insert 0.8 mm corner radius for fine finishes Double-sided chipbreaker with cylindrical hole Consistent surface quality and prolonged tool life The GT9530 grade is a coated cermet engineered for low-wear finishing and light general-purpose turning where a high-quality surface finish matters. The combination of cermet chemistry and a tailored coating improves resistance to abrasive wear while maintaining sharp cutting edges; this results in fewer tool changes and more consistent part surfaces during series production. For operations where dimensional stability and surface integrity are priorities, the insert's polished edge geometry supports predictable cutting forces and smoother finish. ISO standard geometry for simple toolholder selection Supplied as an ISO CNMG 090408 format, the insert fits standard holders when shape, clearance angle, tolerance class, fastening method, size and thickness are matched. The rhombic form and central hole enable secure clamping on a wide range of external holders and boring bars. Stating the ISO designation simplifies procurement and ensures compatibility across tool systems, while the two-sided design provides economical indexable performance with repeatable seating and concentricity. Precision geometry that promotes process stability With a 0.8 mm corner radius, 4.76 mm thickness and an 80° approach angle, the geometry is tuned for stable cutting with reduced vibration and improved edge strength. The rake angle 0° offers a predictable cutting action across common steels, helping to maintain surface finish without excessive cutting forces. These features assist in achieving reproducible machining results, especially in applications where tool runout and fixture rigidity are controlled and where consistent tool life is essential for planning production cycles. Practical system considerations and handling benefits The insert forms part of a complete system: indexable plate, matching clamping kit or shim, fastening screws and the appropriate external holder or boring bar. The double-sided chipbreaker and cylindrical centre hole facilitate reliable seating and straightforward indexing, while the rhombic shape enables use in both external and internal turning. Operators benefit from reduced setup times and predictable replacement intervals, enabling smoother workflow planning and lower inventory complexity when using standard ISO formats. Contact Metav Werkzeuge for tailored advice on Tungaloy GT9530 inserts and to secure original CNMG090408 stock via Metav Werkzeuge; technical consultants are available by email or phone to discuss holder compatibility and process optimisation. Technical data Article number: 6735913 Manufacturer SKU: TUN6735913 SKU: 6735913-Tungaloy Model series: ISO indexable turning inserts Core specifications ISO designation: CNMG090408 Size: 09 (ISO) Thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 80° Rake angle: 0° Hole style: cylindrical centre hole Chipbreaker: double-sided Shape: rhombic Application: Turning Materials & grade Grade: GT9530, coated cermet Material: cemented carbide FAQ What materials is this insert best suited for? The GT9530 grade is a coated cermet optimised for steel machining where good surface finish and extended life are required; it performs well in stable cutting conditions. How many cutting edges are available per insert? The double-sided geometry provides two usable cutting edges per indexable plate before regrinding or replacement is necessary. How does the ISO CNMG 090408 designation help when selecting a holder? ISO CNMG 090408 identifies the insert form and size so compatible holders can be selected based on shape, thickness (4.76 mm), clearance and clamping method to ensure correct fit and repeatability. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength with surface quality, reducing the risk of chipping while supporting finer surface finishes in finishing passes. Is the GT9530 insert suitable for heavy roughing? GT9530 is a wear-resistant finishing to light general-purpose grade; for heavy roughing, a tougher grade would be recommended to withstand higher mechanical loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 IC520N Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-F3PIC520N Series: TURNING CERMET ISO-Code: CNMG090408 Grade: IC520N Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNMG-090408-IC520N-ISCAR 40END
CNMG 090408 IC6015 Indexable Insert - ISCAR
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product features for CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-M3MIC6015 Facts and Figures: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNMG-090408-IC6015-ISCAR 40END
CNMG 090408 IC6015 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-F3MIC6015 Data/ Figures: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090408-IC6015-ISCAR 40END
CNMG 090408 IC6025 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Performance features for CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-M3MIC6025 Facts for the tool: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNMG-090408-IC6025-ISCAR 40END
CNMG 090408 IC6025 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Design details CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-F3MIC6025 Series: ECO FLASHTURN ISO-Code: CNMG090408 Grade: IC6025 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.8 Chip Breaker: double-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNMG-090408-IC6025-ISCAR 40END
CNMG 090408 IC804 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product details indexable inserts CNMG 090408 from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-F3SIC804 Figures for the tool: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC804 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CNMG-090408-IC804-ISCAR 40END
CNMG 090408 IC806 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-M3MIC806 Data/ Figures: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CNMG-090408-IC806-ISCAR 40END
CNMG 090408 IC806 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features CNMG 090408 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CNMG090408-F3SIC806 Facts for the tool: ISO-Code: CNMG090408 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Series: ECO FLASHTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CNMG-090408-IC806-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com