Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 120402 KT315 Indexable Insert - Kennametal
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing directly by post. Information on technical features for CNMG 120402 insert from Kennametal Brand: Kennametal Manufacturer Order Number: CNMG120402FN-KT315-KENNAMETAL Facts / Figures: ISO-Code: CNMG120402 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CNMG-120402-KT315-Kennametal 40END
CNMG 120402 KTP10 Indexable Insert - Kennametal
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Product details for CNMG 120402 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CNMG120402FV-KTP10-KENNAMETAL Dataand Figures: ISO-Code: CNMG120402 Clearance Angle: 0° Angle: 80° Thickness: 4,76mm Radius: 0.2 Special features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CNMG-120402-KTP10-Kennametal 40END
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the insert's stable geometry for consistently high surface quality and low cutting forces; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG 120402 NS9530 — Turning insert (finishing) by Tungaloy A CNMG120402 NS9530 indexable insert engineered for precision external and internal turning of steel in finishing applications Finishing grade NS9530, uncoated cermet Sharp cutting edge for low cutting forces Rhombic CNMG shape, 80° cutting geometry 0.2 mm corner radius, double-sided chipbreaker High-precision finishing for steel components The CNMG120402 NS9530 insert is a finishing-grade solution tailored to deliver excellent surface finish on steel components through a combination of a sharp cutting edge and low cutting forces. The uncoated cermet composition provides a chemically stable, hard cutting edge that maintains geometry during continuous cuts and small depths of cut, making it particularly suitable for operations where surface integrity and dimensional accuracy are priorities. By reducing cutting forces, the insert helps lower vibration, which in turn supports consistent part quality and extended tool life. Geometry and material deliver measurable process benefits Engineered as a rhombic CNMG, the insert features an 80° included angle, a 0° clearance, a 0.2 mm corner radius and a plate thickness of 4.76 mm, all of which contribute to predictable cutting behaviour and mounting stability. The double-sided chipbreaker supports two usable faces per side, improving cost efficiency and offering repeatable chip control when matched to appropriate machining conditions. The base material—carbide substrate with a cermet cutting surface—combines wear resistance with edge sharpness to produce fine surface textures on steels without reliance on a coating. System compatibility and practical selection guidance This insert conforms to the ISO series of turning inserts and forms part of a system comprising a matching external holder or boring bar, underlay/clamping set and fastening screws; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided, rhombic design and cylindrical hole require a compatible clamping seat and screw arrangement. For best results, select the chipbreaker and grade according to the specific steel alloy, the intended cut (continuous vs interrupted) and machine-tool stability. The combination of the NS9530 grade and the rhombic CNMG geometry is engineered to enhance process reliability while delivering efficient finishing performance in shop-floor turning applications. For application-specific guidance on the Tungaloy NS9530 finishing grade and to request availability or a quotation, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: 6950920-Tungaloy Manufacturer SKU: TUN6950920 Manufacturer article number: 6950920 Model series: ISO turning inserts Name: CNMG120402 NS9530 Core specifications ISO designation: 120402 Inscribed circle / size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Clearance angle: 0° Materials & features Material: carbide substrate Cutting material: uncoated cermet (NS9530) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: rhombic (CNMG) Typical application: external and internal turning of steel Recommended for: finishing, continuous cuts, small depths of cut FAQ What materials is this insert intended for? The CNMG120402 NS9530 insert is a finishing-grade cermet designed primarily for machining steel, offering low cutting forces and a fine surface finish when used in continuous turning operations. How does the NS9530 grade affect performance? The NS9530 uncoated cermet provides a very sharp cutting edge with good wear resistance for finishing; the Tungaloy NS9530 grade is optimised to reduce cutting forces and improve surface integrity under stable conditions. Is the insert compatible with standard CNMG holders? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and plate thickness; the CNMG120402 shape follows ISO dimensions and requires a holder matching those parameters. Can the insert be used for interrupted cuts? The insert is optimised for continuous cuts and small depths of cut; for interrupted machining, choose a chipbreaker and grade selected for the specific material and stability requirements rather than relying solely on this finishing grade. How many cutting edges are available per insert? The double-sided chipbreaker design provides multiple usable edges; specific edge counts depend on the insert orientation and indexability on the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade and a precise 0° relief geometry for superior surface finish and low cutting forces; this delivers consistent finishing results in continuous turning operations. Order the insert directly via Metav Werkzeuge or consult their application experts for tailored advice. CNMG120402 NS9530 CNMG turning insert for turning – Tungaloy The CNMG120402 NS9530 Tungaloy indexable insert is an ISO‑compliant rhomboid turning insert designed as a finishing grade for steel, offering a sharp cutting edge and stable performance in continuous cuts. Uncoated cermet NS9530 for finishing 0° relief angle for accurate profiles 0.2 mm corner radius for fine detail ISO rhomboid insert with cylindrical hole Exceptional finishing performance with low cutting forces The finishing grade is built on an uncoated cermet substrate that prioritises surface quality and edge stability. Thanks to the NS9530 formulation and the inherently sharp cutting geometry, the insert produces low cutting forces and a consistently fine surface, reducing the need for secondary finishing. Intended for continuous cuts and small depths of cut, this geometry is especially effective where visual and dimensional surface quality are critical. The cemented carbide backing ensures sufficient support for the cutting edge under finishing conditions. Reliable fitment and straightforward toolholder compatibility Compatibility with toolholders is defined by shape, relief angle, tolerance class, fixing method, size and thickness, and this insert follows ISO conventions to ease integration into existing tool systems. The 0° relief and the rhomboid form factor make it suitable for standard CNMG toolheads; the cylindrical hole supports secure clamping and repeatable positioning. For workshops seeking predictable set‑up and quick indexability, the standard geometry helps to reduce machine downtime and simplifies inventory management. Application focus and material suitability for efficient machining This turning grade is optimised for finishing operations in steel, delivering repeatable edge performance and a stable chipflow with its double‑sided chipbreaker design. The small 0.2 mm corner radius permits accurate profile reproduction and fine-detail turning, while the 4.76 mm plate thickness provides structural rigidity during light finishing cuts. Where consistent surface integrity and tight tolerances matter, the combination of uncoated cermet and ISO form leads to both visual and dimensional benefits that support downstream assembly and inspection processes. For application guidance or to source the CNMG120402 NS9530 Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist assistance and rapid processing Technical Data Article number: 6966063 Manufacturer article number: 6966063 SKU: 6966063-Tungaloy Manufacturer SKU: TUN6966063 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Dimensions & Facts Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Hole: cylindrical Design & Special Features Uncoated cermet grade NS9530 Cemented carbide substrate Double-sided chipbreaker Rhomboid plate form (CNMG) With cylindrical hole for secure clamping Designed for finishing of steel Compatibility determined by shape, relief angle, tolerance class, fixing, size and thickness FAQ Is this insert suitable for finishing operations on steel? The CNMG120402 NS9530 Tungaloy insert is specifically developed as a finishing grade for steel, offering a sharp edge, low cutting forces and high surface quality for continuous cuts and small depths of cut. What is the corner radius and how does it affect the finish? The corner radius is 0.2 mm; this small radius helps to reproduce fine profiles and achieve a superior surface finish while minimising deformation on thin sections. Which holders are compatible with this ISO insert? Compatibility follows ISO conventions: holders matching the CNMG form, plate size 12, thickness 4.76 mm, and a compatible clamping design for a cylindrical hole will provide reliable fitment. Is the insert coated or uncoated? This grade is an uncoated cermet (NS9530), optimised for finishing applications where a sharp, wear‑resistant cutting edge and excellent surface integrity are priorities. What chip control can be expected with this insert? The insert features a double‑sided chipbreaker designed to promote stable chip formation under continuous finishing cuts, improving process reliability and surface consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade, precise ISO geometry and economical double-sided use for consistent finishing on steel; order the insert directly via Metav Werkzeuge or ask consultants for application support. CNMG 120402 NS9530 turning insert by Tungaloy — finishing cermet, 0.2 mm radius A CNMG 120402 NS9530 indexable insert designed for precision turning of steel, offering a finishing-grade uncoated cermet for low cutting forces and excellent surface quality. Cermet finishing grade NS9530 Sharp cutting edge for fine surface finish 0.2 mm corner radius, 80° insert geometry Double-sided chipbreaker, cylindrical hole Deliver consistently improved surface finish with a cermet finishing grade The uncoated cermet grade NS9530 is formulated for finishing operations on steel, delivering a finishing edge that keeps cutting forces low and reduces vibration. This results in measurable improvement in surface integrity and dimensional stability when making continuous passes with small depths of cut. For shops seeking predictable, high-quality finishes, the combination of a sharp cutting edge and a robust substrate supports longer intervals between regrinds and less rework. Predictable geometry for reliable process planning Manufactured to ISO dimensions, the insert features an included angle of 80° and a clearance angle of 0°, which together stabilise cutting forces and direction of chip flow. The modest 0.2 mm corner radius balances edge strength and the ability to achieve fine surface textures. Because compatibility with the holder is determined by form, clearance, tolerance class, fastening, size and thickness, using ISO-standardised inserts simplifies fixture selection and inventory management while enabling repeatable cycle-time planning. Application advantages and recommended cutting conditions This indexable solution is optimised for external and internal turning where continuous cuts and small depths of cut are common. The continuous cuts recommendation aligns with the uncoated cermet’s strengths: a sharp edge for excellent finish and low built-up edge tendency on steels. The double-sided chipbreaker and the rhombic plate form with a cylindrical hole allow cost-effective indexing and simple clamping arrangements, which supports higher productivity in finishing operations without sacrificing component quality. Practical integration into the production cell As part of a system comprising an ISO insert, a matching external holder or boring bar, shims and clamping sets, the insert is straightforward to install and index. The rhombic plate shape and the cylindrical hole facilitate stable location and secure fastening. For teams planning tool lists or retrofitting turning centres, this insert reduces set-up variability thanks to standardised dimensions and well-understood handling procedures, aiding faster process qualification and drift-free production runs. For precision finishing with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored application advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950912 Manufacturer SKU: TUN6950912 SKU: 6950912-Tungaloy Designation: CNMG120402 NS9530 Tungaloy indexable insert Core specifications Insert size: 12 mm Included angle: 80° Corner radius: 0.2 mm Clearance angle: 0° Plate thickness: 4.76 mm Special features Material: carbide Grade: NS9530 (uncoated cermet) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Series: ISO turning indexable inserts FAQ What materials is this insert intended for? This Tungaloy CNMG 120402 NS9530 insert is intended primarily for turning steel, offering a finishing-grade solution that performs best in continuous cutting on steels. Is the cutting edge coated? The grade NS9530 is an uncoated cermet, providing a sharp edge for superior surface finish rather than a coating-based wear layer. How is compatibility with a toolholder ensured? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; check holder specifications against the ISO dimensions of the insert before fitting. Can both sides of the insert be used? The double-sided chipbreaker and rhombic plate form allow the insert to be indexed and used on both faces before replacement. For which operations is this insert recommended? The insert is recommended for external and internal turning where fine surface quality and small depths of cut are required, particularly in continuous cutting applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Combining the CVD-coated T6215 grade, the 0.2 mm nose radius and the ISO CNMG form delivers durable wear resistance and consistent surface finish in stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CNMG 120402 T6215 indexable insert for turning — Tungaloy, CVD-coated, 0.2 mm radius The CNMG120402 T6215 indexable insert for turning provides a wear-resistant, CVD-coated solution optimised for stainless-steel applications under steady to lightly interrupted cuts CVD-coated carbide grade T6215 ISO CNMG 120402 rhombic insert 0.2 mm nose radius for fine finishes Double-sided chipbreaker, cylindrical hole Consistent performance for stainless-steel turning The CVD-coated cemented carbide matrix of this insert offers high wear resistance specifically designed for machining stainless steel under stable to slightly interrupted conditions. The T6215 grade balances edge stability and toughness, which reduces flank wear and helps maintain dimensional accuracy across longer tool life. In practice, this means fewer tool changes and more predictable component quality — a direct contribution to improved cycle-time efficiency and reduced scrap rates in serial production. Geometry and compatibility that simplify set-up The rhombic CNMG geometry with an 80° lead angle and a 0° relief provides a versatile cutting edge suited for both external and internal turning operations. The insert’s 0.2 mm nose radius supports fine surface finishes while the 4.76 mm thickness and 12 mm size ensure mechanical stability in standard ISO toolholders. Compatibility with a holder depends on form, relief angle, tolerance class, mounting method, size and thickness; selecting the correct holder and clamping kit is essential for achieving the intended performance and repeatability in the machining process. Practical benefits for production and process security With a double-sided chipbreaker and a cylindrical hole for secure fastening, the insert promotes stable chip formation and reliable clamping under load. The design aims to reduce vibrations and maintain a stable cutting edge during continuous runs, which supports consistent surface quality and extended insert life. For workshop planners, this results in lower downtime and more predictable maintenance intervals, contributing to overall process security and cost-efficiency in turning operations. For application advice, toolholder compatibility checks or to secure stock of Tungaloy CNMG120402 T6215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery options. Technical Data Article number: 6950917 SKU: 6950917-Tungaloy Manufacturer SKU: TUN6950917 Model series: ISO turning indexable inserts Facts Lead/approach angle: 80° Nose radius: 0.2 mm Thickness: 4.76 mm Size: 12 mm Relief angle: 0° Special features Grade: T6215 (CVD-coated cemented carbide) Insert form: rhombic Hole: cylindrical hole Chipbreaker: double-sided Intended application: external and internal turning of stainless steels under stable to slightly interrupted conditions System: ISO insert with compatible outer holder, clamping set and replacement screws FAQ Is this insert suitable for machining stainless steel? Yes. The CNMG120402 T6215 insert features a CVD-coated cemented carbide grade developed for stainless-steel turning under stable to lightly interrupted conditions. What chip control does the insert provide? The insert is supplied with a double-sided chipbreaker, designed to promote stable chip formation and reduce the risk of troublesome swarf in turning operations. How does one ensure compatibility with a toolholder? Compatibility is determined by insert form, relief angle, tolerance class, mounting method, size and thickness; verifying these parameters against the chosen toolholder ensures correct seating and clamping. Does the insert have a central hole and what is its style? Yes. The insert is provided with a cylindrical hole to suit standard clamping and fastening arrangements in compatible holders. What are the key geometry values to consider for set-up? Important measurable values include the 80° lead angle, 0.2 mm nose radius, 4.76 mm thickness and 12 mm size, which together influence cutting forces, finish and mechanical stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 and the rhombic CNMG120402 form for dependable performance in turning applications; order genuine parts directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T6215 Turning Insert by Tungaloy — rhombic 80° form, 0° clearance CNMG120402 T6215 is an ISO-standard rhombic turning insert optimised for stable to lightly interrupted cuts in rostfreier Stahl. CVD-coated carbide T6215 Rhombic 80° geometry Cylindrical mounting hole Double-sided chipbreaker design Durable grade and consistent edge life for industrial turning The CVD coating on this cemented carbide grade provides high wear resistance and thermal stability, making the insert suitable for continuous and light interrupted turning of rostfreier Stahl. The hardened substrate in combination with the coating ensures predictable flank wear and extended tool life, which translates into reduced tool-change frequency and higher machine uptime. Choosing a CVD-coated grade such as T6215 supports process reliability and helps to maintain dimensional accuracy across long production runs. Secure clamping and ISO compatibility to reduce setup risks Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic form with an 80° included angle and a cylindrical hole gives a stable seat in ISO-compatible holders and boring bars; correct selection of insert orientation and clamping torque reduces vibration and improves surface quality. The 0° clearance angle demands careful holder geometry but, when matched correctly, promotes rigidity and repeatable cutting results. Chip control and application fit for external and internal turning The double-sided chipbreaker geometry supports reliable chip evacuation under varied cutting conditions and is designed to be paired with a chipbreaker and grade suited to the workpiece, machining strategy and machine stability. For external and internal turning operations, the rhombic shape balances cutting edge strength with accessibility, enabling turning in more confined contours while maintaining consistent finish and form. Selection of the correct chipbreaker and grade helps to avoid built-up edge and to optimise cycle times. Operational benefits and selection guidance Selecting the right insert involves considering material, coating and chipbreaker against the machining task; the T6215 grade is formulated for wear resistance on rostfreier Stahl and is a pragmatic choice where process stability and predictable tool life are priorities. Use the insert in combination with an appropriate holder, substrate support and clamping set; regular inspection of edge condition and adherence to recommended cutting parameters will preserve performance and prevent premature failure. For reliable procurement and application support with Tungaloy turning inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical Data Article number: 6950904 Manufacturer SKU: TUN6950904 SKU: 6950904-Tungaloy Designation: CNMG120402 Model series: ISO turning inserts Material: Hartmetall Grade/coating: T6215, CVD-coated Core data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Clearance angle: 0° Mounting style: with hole, cylindrical hole Features & applications Rhombic insert form Double-sided chipbreaker Suitable for external and internal turning Intended for rostfreier Stahl under stable to lightly interrupted conditions ISO-standard interchangeability with compatible holders FAQ What materials is this insert best suited to machine? The CNMG120402 T6215 turning insert is designed primarily for machining rostfreier Stahl; the T6215 grade and CVD coating are selected for wear resistance in those conditions. How does the insert mount in a holder and what must be checked? The insert uses a cylindrical hole for secure clamping; confirm holder seat form, tolerance class, fastening method, size and thickness to ensure proper fit for the CNMG120402 insert. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker design offers dependable chip control in stable to lightly interrupted conditions; choose the chipbreaker and cutting data to match the specific operation. Which model or SKU should be ordered for this specification? Order the item by manufacturer article number 6950904 or SKU 6950904-Tungaloy to obtain the CNMG120402 T6215 insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, an 80° rhombic geometry and a 0.2 mm corner radius for consistent chip control and extended tool life during turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T6215 turning insert — Tungaloy, CVD-coated carbide, 0.2 mm radius CNMG120402 T6215 is an ISO-format indexable insert designed for turning applications, optimised for stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for wear resistance 80° rhombic geometry for versatile turning 0.2 mm corner radius for fine finishing Double-sided with cylindrical hole for secure clamping Increased productivity through longer tool life The CNMG120402 insert combines a CVD coating with a wear-resistant carbide substrate, providing a measurable increase in service life compared with uncoated grades. The coating reduces flank and crater wear, which translates into fewer indexings and less downtime. This results in higher process efficiency and a lower cost per component when machining medium-hard and stainless materials. The design supports stable cutting conditions, so the primary benefit is sustained cutting performance with predictable maintenance intervals. Consistent surface quality and chip control for stainless steels The 80° rhombic geometry and the double-sided chipbreaker are tuned to promote controlled chip formation when machining stainless steels, where work hardening and built-up edge are common challenges. The modest 0.2 mm corner radius enables fine finishing passes, producing improved surface finishes while maintaining edge strength. As a result, the insert enables reliable dimensional control and repeatable component quality, especially in serial production and precision-turning tasks where consistency matters. Simple integration and secure clamping for workshop use Compatibility with standard ISO holders is assured through the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole supports positive location and repeatable clamping. The 4.76 mm thickness and standard 12 mm size ensure robust seating in common turning toolblocks, while the 0° relief angle reduces the risk of interference on profile work. The design therefore eases tool changeover, shortens setup time and contributes to a smoother production flow — particularly valuable in mixed-batch or tool-changing workplaces. For procurement and application support, contact Metav Werkzeuge for supply and tailored advice — Metav Werkzeuge can confirm compatibility with existing holders and recommend cutting data for specific stainless steel grades. Technical Data Article number: 6966060 SKU: 6966060-Tungaloy Manufacturer SKU: TUN6966060 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Insert angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating / Grade: T6215 (CVD-coated) Geometry: rhombic, CNMG Chipbreaker: double-sided Application: turning, suitable for stainless steels Usage: compatible with ISO holders, designed for stable to lightly interrupted machining FAQ What materials is this insert best suited for? The CNMG120402 T6215 insert is optimised for stainless steels and performs well under stable to lightly interrupted turning conditions. How does the T6215 coating benefit machining? The T6215 CVD coating enhances wear resistance and reduces edge degradation, which helps maintain dimensional accuracy and extends the service life of the insert. Is the insert compatible with standard CNMG holders? Compatibility depends on holder form, clearance, tolerance class, fastening and size; the CNMG120402 geometry and cylindrical hole are designed for secure seating in ISO CNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9215 Wendeplatten - Tungaloy
CNMG 120402 T9215 Wendeplatte – ISO-Drehwendeschneidplatte von Tungaloy CNMG 120402 T9215 verbindet CVD-beschichtetes Hartmetall mit robuster Geometrie für produktives Drehen mittlerer Stahlqualitäten. ISO-genormte CNMG-Form für zuverlässigen Sitz CVD-beschichtetes Hartmetall für hohe Standzeit Für mittlere Stahlbearbeitung optimiert Doppelseitiger Spanbrecher, rhombische Form Zylindrisches Loch, 4,76 mm Plattendicke Produktivität und Prozesssicherheit steigern Die CNMG 120402 T9215 Wendeplatte ist entwickelt für produktive Außen- und Innendrehprozesse bei mittleren Stahlqualitäten. Die Kombination aus CVD-beschichtetem Hartmetall und optimierter Spanform sorgt für konstante Zustellung und reduzierte Werkzeugwechsel, was die Produktivität sichtbar erhöht. Durch die hohe Verschleißfestigkeit bleibt die Oberflächenqualität der Werkstücke über längere Standzeiten stabil, wodurch Rüstzeiten und Stillstand minimiert werden. Material und Beschichtung: robust und belastbar Das CVD-beschichtete Hartmetall der Sorte T9215 bietet eine ausgewogene Balance aus Verschleißwiderstand und Bruchsicherheit. Diese Kombination macht die Wendeplatte zur ersten Wahl bei kontinuierlichem bis leicht unterbrochenem Schnitt. Der Anwender profitiert von gleichmäßigen Schneidkantenzuständen und einer verbesserten Bearbeitungssicherheit, speziell bei anspruchsvollen Stahllegierungen und wechselnden Schnittbedingungen. Konstruktion und Kompatibilität für einfache Integration Die rhombische Plattenform mit Eckenradius 0,2 mm, 4,76 mm Plattendicke und zylindrischem Loch gewährleistet einfache Montage in standardisierten ISO-Außenhaltern. Die CNMG-Geometrie und die Toleranzklasse sichern präzisen Sitz und Wiederholgenauigkeit, sodass sich Werkzeuge schnell und zuverlässig in bestehende Werkzeugaufbauten integrieren lassen. Das reduziert Rüstaufwand und vereinfacht Lagerhaltung durch ISO-konforme Austauschbarkeit. Zielgruppe und empfohlene Anwendungen Diese Wendeplatte richtet sich an Fertigungsbetriebe, Lohnfertiger und Instandhaltungswerkstätten, die wirtschaftliche Zerspanung bei Stahlprodukten benötigen. Ideale Einsatzfelder sind Serien- und Einzelteilfertigung im Maschinenbau sowie Reparaturarbeiten mit mittleren Schnittparametern. Durch die robuste Sorte T9215 lassen sich konstante Ergebnisse und gute Oberflächengüten erzielen, auch bei leicht unterbrochenen Schnitten. Empfehlung: Für produktive und zuverlässige Zerspanung die CNMG 120402 T9215 Wendeplatte von Tungaloy direkt über Metav Werkzeuge anfragen: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6950914 Marke: Tungaloy Serie / Baureihe: ISO-Drehwendeschneidplatten Bezeichnung: CNMG120402 Fakten Eckenradius: 0,2 mm Plattendicke: 4,76 mm Plattengröße: 12 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: T9215 (CVD-beschichtet) Plattenform: rhombisch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Einsatzbereich: mittlere Stahlbearbeitung Systemaufbau: ISO-genormte Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der CNMG 120402 T9215 am besten bearbeiten? Die CNMG 120402 T9215 Wendeplatte ist speziell für die mittlere Stahlbearbeitung ausgelegt und bietet dabei gute Verschleißfestigkeit und Bruchsicherheit für konstante Ergebnisse. Welchen Vorteil bringt die CVD-Beschichtung der Sorte T9215? Die CVD-Beschichtung der T9215-Sorte erhöht den Verschleißwiderstand und verlängert die Standzeit, was bei kontinuierlichen Schnittbedingungen die Produktivität steigert. Ist die Wendeplatte für unterbrochene Schnitte geeignet? Ja, die mechanische Robustheit der T9215-Sorte erlaubt den Einsatz bei leicht unterbrochenen Schnitten; dabei bleibt die Kantenschärfe länger erhalten. Welche Plattendicke und Lochausführung hat die Wendeplatte? Die Platte hat eine Plattendicke von 4,76 mm und ein zylindrisches Loch zur Befestigung in ISO-konformen Haltern. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide grade and the 0.2 mm corner radius in a robust ISO rhombic geometry to raise productivity and tool life in medium-duty turning; order directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T9215 — ISO turning insert (rhombic, 80°) by Tungaloy The CNMG120402 T9215 is an ISO rhombic indexable insert for external and internal turning, engineered for productive machining of medium-strength components with a stable chipformer and reliable wear resistance CVD-coated carbide T9215 for high wear resistance Rhombic 80° geometry for stable cutting forces 0.2 mm corner radius for accurate contouring Double-sided chipbreaker for economical indexing Higher productivity through targeted coating and substrate The combination of a CVD-coated surface and a cemented carbide substrate provides a controlled wear pattern and consistent edge life, which directly reduces machining interruptions. This grade is tailored for medium-duty applications where a balance between wear resistance and fracture toughness is required; the result is longer intervals between indexings and fewer unscheduled tool changes. The engineered coating chemistry ensures predictable performance under continuous to slightly interrupted cuts while maintaining surface integrity on the workpiece. Geometry that stabilises the cut and improves surface finish An 80° included angle in a rhombic format delivers a wide bearing surface that dampens vibrations and distributes cutting loads. The modest 0.2 mm corner radius allows precise profile work without sacrificing edge strength, making the insert suitable for finishing passes and light roughing when stability is maintained. The zero-degree clearance specification supports a neutral cutting action that helps achieve consistent dimensional results and an improved nominal surface quality. Practical compatibility and reliable clamping As an ISO-standard insert, this indexable plate integrates into common holder systems when form, clearance angle, tolerance class, fastening and size match. The insert is furnished with a cylindrical hole, enabling secure mounting and repeatable positioning in compatible toolholders or boring bars. The double-sided chipbreaker design extends usable life by offering two cutting edges per index, increasing economy in high-volume setups without complex regrinding procedures. Choosing the right chipformer and process parameters Selecting the appropriate chipbreaker and cutting data maximises the benefits of the T9215 grade: for continuous cuts prefer moderate feed rates with stable support; for slightly interrupted conditions reduce cutting speed and favour the robust substrate to avoid chipping. The insert suits both external and internal turning operations when paired with a matching holder and correct clamping torque. Process planning that prioritises rigidity and consistent coolant supply will leverage the insert’s strengths for reproducible production output. For procurement or process consultation on the Tungaloy CNMG120402 T9215 insert, contact Metav Werkzeuge for application-specific advice and supply coordination at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and cutting data. Technical data Article number: 6966058 Manufacturer SKU: TUN6966058 Label / Name: CNMG120402 T9215 Tungaloy insert Model series: ISO turning inserts Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 12 mm Included angle: 80° Clearance angle: 0° Hole: cylindrical Special features Material: cemented carbide Coating: CVD, grade T9215 Shape: rhombic Chipformer: double-sided Application: turning (external and internal) Compatibility: ISO-standard insert family Mounting: with hole, compatible with appropriate holders Suitability: continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The CNMG120402 T9215 insert from Tungaloy is optimised for medium-strength metals and components where a balance of wear resistance and toughness is required; it performs well on typical medium alloy and carbon workpieces. How many usable edges does the insert provide? This indexable plate features a double-sided chipbreaker, offering two primary cutting edges per side and therefore multiple indexing positions to extend effective tool life. Is the insert compatible with standard CNMG holders? Compatibility depends on matching form, clearance angle, tolerance class, fastening and size; the CNMG120402 conforms to ISO dimensions, so it fits holders specified for CNMG 120402 inserts when those parameters align. Which cutting situations suit the T9215 grade best? T9215 is designed for productive machining under continuous to slightly interrupted cuts where consistent wear resistance is required without compromising fracture toughness. What benefits does the CVD coating provide on this insert? The CVD-coated surface on the CNMG120402 T9215 improves wear resistance and stabilises edge behaviour, supporting longer service intervals and more reproducible surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.2 mm corner radius for reliable edge life and proven compatibility with ISO holders for consistent turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG120402 120402 T9215 — Tungaloy turning insert (rhombic, 0° rake) The CNMG120402 T9215 is a rhombic ISO turning insert designed for external and internal turning in medium steel applications, combining a CVD-coated carbide grade with a double-sided chipbreaker for sustained productivity CVD-coated carbide for high wear resistance Rhombic CNMG 80° geometry, 0° rake angle Double-sided chipbreaker for consistent chip control 0.2 mm corner radius for balanced edge strength High, consistent performance for medium-steel turning The rhombic ISO insert delivers stable cutting under continuous to lightly interrupted conditions thanks to the T9215 CVD-coated carbide grade. The coating provides enhanced wear resistance while the substrate maintains fracture toughness, so component quality and tool life are optimised. For machining medium-strength steels, this combination reduces downtime through predictable tool change intervals and supports higher feed rates where process stability permits. The result is a measurable improvement in cycle time without compromising surface integrity. Secure clamping and predictable compatibility Designed to match ISO-holder geometries, the insert’s 80° cutting geometry and 0° rake require selection of a compatible external holder or boring bar that respects form, clearance angles and tolerance class. The insert features a cylindrical locating hole and standard thickness to ensure repeatable seating and clamping. When assembled correctly, the system minimises vibration and runout, improving dimensional repeatability and reducing the risk of unexpected edge failure in production environments. Controlled chips and surface quality for reliable throughput The double-sided chipbreaker is engineered to produce short, manageable chips in medium steel, helping to maintain uninterrupted material flow and safe evacuation. Together with the 0.2 mm corner radius, the insert offers a balance between edge strength and surface finish, allowing for light finishing passes as well as more substantial stock removal. For manufacturers prioritising consistent part quality and process reliability, the insert supports stable cutting forces and reduces rework rates. Practical selection and application tips for workshop use When choosing grade and geometry, match the T9215 grade to workpiece material and cutting conditions: it is intended as a first choice for medium steel machining where both wear resistance and breakage resistance are required. Select the insert size and thickness to suit the holder and application rigidity; ensure coolant strategy and cutting parameters are aligned with the grade’s capabilities to prolong tool life. Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness — confirm these parameters before production trials. For procurement or application advice on the Tungaloy T9215 grade and the CNMG120402 insert, contact Metav Werkzeuge by phone or email for tailored technical support and ordering assistance: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6950902 Manufacturer SKU: TUN6950902 Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Facts Insert shape: rhombic CNMG Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Rake angle: 0° Approach angle: 80° Hole: with cylindrical hole Special features Double-sided chipbreaker ISO-standardised insert Suitable for continuous to slightly interrupted cuts Recommended for medium steel machining Compatible with standard external holders and boring bars FAQ What applications suit this insert best? This CNMG120402 T9215 insert is intended primarily for external and internal turning of medium steels and performs well under continuous to lightly interrupted cutting conditions. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide offers improved wear resistance and good fracture toughness, which together extend the service life of the Tungaloy insert in medium steel machining. Is the insert reversible and how many cutting edges are available? The rhombic CNMG shape with a double-sided chipbreaker provides multiple indexed cutting edges per insert, enabling economical use of each cutting face. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening and insert size; the CNMG120402 fits holders designed for CNMG 120402 geometry with a matching locating feature. Can this insert handle interrupted cuts? Yes — the insert and grade combination is suitable for continuous to slightly interrupted cuts; for heavier interruptions, choose a geometry and grade adapted to greater shock loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the double-sided chipbreaker for reliable, productive turning of medium to heavy steel; benefit from stable chip control and long tool life. Order the CNMG120402 T9225 insert directly via Metav Werkzeuge or ask the consultants for application advice. CNMG120402 T9225 — CNMG ISO turning insert for robust steel machining by Tungaloy CNMG120402 T9225 is an ISO‑standard indexable insert for external and internal turning, designed as a robust universal grade for variable engagement and slightly interrupted cuts. CVD-coated carbide grade T9225 Universal for medium to heavy steel Double-sided chipbreaker for stability ISO CNMG 120402 shape with 0.2 mm radius Consistent performance under mixed cutting conditions The combination of a CVD-coated surface and a carbide substrate in grade T9225 provides a balance between wear resistance and toughness. This makes the insert particularly suitable for medium to heavy steel machining where engagement conditions change or cuts are intermittently interrupted. The coating reduces adhesive wear and supports higher cutting parameters, while the substrate maintains edge integrity under mechanical shock. For production environments, this translates into fewer insert changes and improved process continuity, helping to keep cycle times predictable. Stable chip control and extended tool life Equipped with a double-sided chipbreaker, the insert promotes controlled chip formation across a range of feeds and depths of cut. The rhombic geometry with an 80° approach angle and a 0° rake offers robust cutting stability; the small 0.2 mm corner radius improves edge strength for tough starts and interrupted cuts. For users less familiar with chipbreaker function: the chipbreaker deforms and segments the chip at the cutting edge, reducing risk of entanglement and improving evacuation, which in turn protects the workpiece surface and reduces secondary operations. Simple integration with ISO tooling systems As an ISO CNMG 120402 insert, the geometry and mounting interfaces follow international standards, enabling straightforward fitment into compatible external holders or boring bars. The insert has a 4.76 mm thickness and the plate size corresponds to the ISO 12 designation, with a cylindrical hole for positive clamping. Typical system setup comprises an ISO holder, a support shim or clamp, and the matching fastening screw. This standardisation shortens tooling planning and simplifies inventory management across multi‑machine shops. Why this grade benefits modern production The T9225 grade is formulated as a robust universal option that copes well with variable steel grades and unstable cutting conditions. Its design philosophy supports productive turning with a focus on process security and repeatable surface quality. Where operations demand a reliable compromise between life and edge stability—such as mixed batch production or workshops handling diverse steel components—this insert helps maintain throughput while reducing the frequency of tool interventions. Choose the Tungaloy CNMG120402 T9225 insert for resilient, predictable turning performance and contact Metav Werkzeuge for technical matching and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950916 SKU: 6950916-Tungaloy Manufacturer SKU: TUN6950916 Manufacturer: Tungaloy Facts Plate size: 12 Plate thickness: 4.76 mm Corner radius: 0.2 mm Approach angle: 80° Rake (clearance) angle: 0° Special features CVD-coated carbide, grade T9225 Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical hole for clamping ISO‑standard turning indexable insert for external and internal turning Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suited for? The CNMG120402 T9225 insert is intended primarily for medium to heavy steel machining and performs well under changing engagement conditions or slightly interrupted cuts. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert improves chip control and evacuation, reducing the chance of chip jamming and supporting consistent surface finish. Can the insert be used for internal turning as well as external turning? Yes, the ISO CNMG geometry and standard hole make the insert compatible with suitable boring bars and external holders for both internal and external turning operations. How many cutting edges are available per insert? The insert is double-sided and indexable; edges can be rotated or flipped according to the holder and clamping method to present fresh cutting edges as required. Which holders and clamping components are required? Mounting requires a compatible ISO CNMG external holder or boring bar, plus the appropriate shim/clamp and securing screw; ensure form, clearance, tolerance class and thickness match the insert specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9225 Wendeplatten - Tungaloy
CNMG 120402 T9225 Wendeplatte für Drehen von Tungaloy Die CNMG 120402 T9225 ist eine ISO-genormte, rhombische Wendeplatte für robuste Außen- und Innendrehprozesse in der Stahlbearbeitung. CNMG 120402 T9225 von Tungaloy: ISO-genormt CVD-beschichtetes Hartmetall für hohe Standzeit Doppelseitiger Spanbrecher für variable Schnitte Mit zylindrischem Loch und 0° Freiwinkel Eckenradius R0,2 und Plattendicke 4,76 mm Höhere Produktivität durch robuste Universalsorte Die CNMG120402 T9225 bietet eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit, ideal für wechselnde Eingriffsbedingungen. Durch die CVD-Beschichtung und das speziell abgestimmte Schneidstoffgefüge reduziert sich der Werkzeugwechselbedarf, was die Produktivität steigert und Stillstandzeiten verringert. Anwender profitieren von gleichbleibender Performance bei mittleren bis schweren Schnitten und weniger Ausschuss durch konstante Schnittbedingungen. Materialeigenschaften und Beschichtungsnutzen Gefertigt aus Hartmetall mit CVD-Beschichtung, sorgt die Platte für eine stabile Schneidkante und gute Spanabfuhr. Die CVD-Technologie erzeugt eine bindige, hitzebeständige Schicht, die besonders bei abrasiven Stählen und unterbrochenen Schnitten Vorteile bringt. Zur Erklärung: Bei der CVD-Beschichtung wird eine chemische Dampfabscheidung genutzt, die eine harte Schicht auf dem Substrat bildet und dadurch die Standzeit erhöht. Einsatzempfehlung und Bearbeitungsstrategie Für Außen- und Innendrehen empfiehlt sich die Auswahl des passenden Spanbrechers entsprechend Werkstoff und Schnittbedingungen; die doppelseitige Ausführung bietet zusätzlichen Vorteil bei Umsetzen der Schneide. Der Winkel 80° und der Eckenradius R0,2 unterstützen stabile Einstech- und Schruppoperationen. Bei wechselnden Eingriffen empfiehlt sich leicht reduzierte Schnittgeschwindigkeit und angepasste Vorschubwerte, um die Zähigkeit der Sorte optimal zu nutzen. Kompatibilität, Handling und Systemhinweise Als ISO-Drehplatte ist die Kompatibilität zu Haltern über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Die Platte verfügt über ein zylindrisches Loch und ist doppelseitig einsetzbar, was Handhabung und Vorratseffizienz verbessert. Austauschschrauben, Unterlagen und ein geeigneter Klemmsatz sind Teil des Systemaufbaus; so wird die Wiederholgenauigkeit beim Einlegen gewährleistet. Für produktive Zerspanung empfiehlt Metav Werkzeuge die CNMG 120402 T9225 als wirtschaftliche Lösung für mittlere bis schwere Stahlbearbeitung — technische Beratung und Bestellung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6950903 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CNMG120402 Tungaloy-Wendeplatte Daten Radius: 0,2 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 12 mm Eckenradius: 0,2 mm Freiwinkel: 0° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9225 Einsatz: Drehen Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch SKU Hersteller: TUN6950903 Hersteller Artikelnummer: 6950903 FAQ Was zeichnet die Sorte T9225 aus? Die Sorte T9225 von Tungaloy ist eine robuste Universalsorte auf Hartmetallbasis mit CVD-Beschichtung, ausgelegt für mittlere bis schwere Stahlbearbeitung und wechselnde Eingriffsbedingungen; sie bietet gute Zähigkeit und stabile Spanbildung. Für welche Anwendungen eignet sich die CNMG 120402 T9225 besonders? Die CNMG 120402 T9225 ist prädestiniert für Außen- und Innendrehen bei Stahlwerkstoffen, insbesondere wenn leicht unterbrochene Schnitte oder variable Schnittbedingungen vorliegen. Wie viele Schneidkanten stehen pro Platte zur Verfügung? Aufgrund der doppelseitigen Ausführung der CNMG 120402 Tungaloy-Wendeplatte stehen mehrere Nutzkanten zur Verfügung, was die Wirtschaftlichkeit durch längere Nutzungsintervalle verbessert. Welche Rolle spielt der Eckenradius R0,2? Der Eckenradius R0,2 der CNMG 120402 beeinflusst die Kantenstabilität und Oberflächengüte; kleinere Radien eignen sich für feine Konturen und gute Maßtreue bei Präzisionsdrehoperationen. Worauf ist bei der Halterkompatibilität zu achten? Die Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; für die CNMG 120402 ist ein rhombischer ISO-Halter mit entsprechendem Klemmsystem und zylindrischer Lochaufnahmenutzung erforderlich. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust T9225 grade and CVD-coated cemented carbide construction combined with an 80° rhombic geometry and a double-sided chipbreaker for dependable medium-to-heavy steel turning. Order directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. CNMG 120402 T9225 — Indexable insert for turning by Tungaloy The CNMG120402 T9225 is an ISO rhombic indexable insert designed for external and internal turning, optimised for medium-to-heavy steel machining and intermittent cuts. ISO rhombic 80° geometry for turning CVD-coated cemented carbide T9225 Double-sided chipbreaker with cylindrical hole 12 mm size, 4.76 mm thickness, 0.2 mm radius Consistent cutting performance where conditions vary The combination of a CVD-coated surface and cemented carbide substrate in the T9225 grade delivers a balance of toughness and wear resistance that is particularly suitable for medium-to-heavy steel machining. This composition supports reliable edge life under slightly interrupted cuts and fluctuating engagement, reducing unscheduled tool changes. The coating enhances thermal stability and abrasion resistance, so the tool keeps performance consistent across varied feeds and speeds while maintaining acceptable surface quality. Clear compatibility and secure clamping for predictable results As an ISO turning insert, the rhombic 80° geometry and the specified dimensions ensure compatibility with standard ISO holders when matching form, relief angle, tolerance class, fastening method, size and thickness. The insert is supplied double-sided, with a cylindrical hole for positive locating and repeatable seating; this allows economical use of both cutting edges and straightforward indexing. Noting the 0° clearance angle and the physical measures helps to identify the correct holder and clamping kit to achieve secure fixation and consistent tool projection. Designed to improve uptime and operational economy Selecting a robust universal grade such as T9225 supports stable chip formation and extended service intervals, which contributes directly to shop-floor productivity. The double-sided chipbreaker reduces chip control issues in a wide range of steels and cutting conditions, decreasing machine downtime and handling effort. Fewer insert changes and predictable wear behaviour translate into lower per-part tooling costs and a more efficient machining cycle, a tangible advantage for batch production and mixed-lot environments. Practical guidance for turning applications on the shop floor For external and internal turning applications, choose the chipbreaker and the insert grade according to workpiece material and rigidity of the setup. The 0.2 mm corner radius provides a good compromise between strength and edge definition for finishing and semi-finishing passes; the 12 mm size and 4.76 mm thickness are typical for robust external operations and allow for sufficient clamping surface. When mounting, verify holder compatibility with the ISO designation and confirm the double-sided chipbreaker orientation for optimum chip flow and evacuation. For application-specific advice or order placement, contact Metav Werkzeuge for a personalised consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMG 120402 T9225 insert and suitable holder combinations Technical data Article number: 6966059 Manufacturer SKU: TUN6966059 SKU: 6966059-Tungaloy Model series: ISO turning inserts Grade: T9225 Material: cemented carbide Dimensions / Key figures Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Geometry angle: 80° Clearance angle: 0° Special features CVD coating Double-sided chipbreaker Rhombic plate form Cylindrical hole Application: turning Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ Which turning operations is this insert intended for? The CNMG120402 T9225 indexable insert by Tungaloy is intended for external and internal turning operations, especially where medium-to-heavy steel machining and slightly interrupted cuts demand a tough, wear-resistant grade. How is holder compatibility ensured? Compatibility depends on matching the ISO geometry, the relief/freiwinkel, the tolerance class, the fixing method and the insert size/thickness; the CNMG120402 form and 80° rhombic geometry assist in selecting the correct ISO holder. What do the core specifications mean for machining? The CVD-coated cemented carbide and T9225 grade signal a balance of wear resistance and toughness suited to steels, while the 0.2 mm corner radius indicates suitability for mixed finishing and semi-finishing passes. Is the insert reversible or single-use per edge? This insert is double-sided with a cylindrical hole, allowing indexing of both cutting edges and improving economical use of the insert in production. Which SKU should be referenced when ordering or enquiring? Reference SKU 6966059-Tungaloy or Manufacturer SKU TUN6966059 when discussing the CNMG120402 T9225 Tungaloy indexable insert to ensure precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 -MF 1205 Indexable Insert - Sandvik
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Product specifications CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-MF1205-SANDVIK ISO-Code: CNMG120404 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: -MF Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-1205-Sandvik 40END
CNMG 120404 -QM 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Design details CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-QM1205-SANDVIK Facts / Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -QM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-1205-Sandvik 40END
CNMG 120404 -QM 1210 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-QM1210-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1210 Chip Breaker: -QM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-120404-1210-Sandvik 40END
CNMG 120404 -SF 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-SF1205-SANDVIK Dataand Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 1205 Chip Breaker: -SF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-1205-Sandvik 40END
CNMG 120404 -SM 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-SM1205-SANDVIK Facts / Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -SM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-1205-Sandvik 40END
CNMG 120404 -SM 1210 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-SM1210-SANDVIK Data/ Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 1210 Chip Breaker: -SM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-1210-Sandvik 40END
CNMG 120404 -SMC 1210 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404-SMC1210-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1210 Chip Breaker: -SMC with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-1210-Sandvik 40END
CNMG 120404 120404 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide durability and an ISO‑standard geometry that ensures reliable holder compatibility; the plate’s T9215 grade delivers wear resistance and fracture toughness for productive medium‑steel turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application guidance. CNMG 120404-TM T9215 — ISO CNMG120404 rhombic turning insert, CVD‑coated carbide, 0.4 mm corner radius (Tungaloy) A CNMG 120404-TM T9215 indexable turning insert engineered for medium steel turning, offering high wear resistance and consistent performance in continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 ISO CNMG 120404 rhombic geometry 0.4 mm corner radius for fine finish Double-sided chipbreaker with cylindrical hole Productivity with reliable wear resistance The T9215 grade is a CVD‑coated carbide designed to balance wear resistance and fracture toughness, making it particularly effective for medium steel machining. This combination allows stable cutting at elevated feed rates and supports high productivity in continuous to lightly interrupted operations. The coating reduces flank and crater wear, extending effective tool life and lowering changeover frequency, which benefits batch production and longer turning cycles. Precise ISO geometry for straightforward toolholder matching The insert follows the ISO CNMG120404 specification with a rhombic 80° included angle and 0° relief angle, which simplifies selection of the corresponding holder. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; ensuring these parameters match the toolholder avoids setup errors and contributes to consistent cutting conditions. The ISO conformity aids tool management and inventory control across multiple machines. Controlled surface quality and cutting stability With a 0.4 mm corner radius, the plate offers a favourable compromise between edge strength and surface finish: small radii help achieve finer finishes while maintaining edge integrity under moderate feeds. The double‑sided chipbreaker supports predictable chip formation and evacuation, while the cylindrical central hole and 4.76 mm thickness ensure secure clamping in standard CNMG holders. Together, these features reduce vibration, improve repeatability and support efficient finishing passes. For high‑productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific steel grades and machining conditions Technical data Article number: 6772176 Manufacturer SKU: TUN6772176 SKU: 6772176-Tungaloy Label: CNMG 120404-TM T9215 Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Material: carbide Coating: T9215 (CVD) Plate form: rhombic, with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO turning inserts FAQ What materials is this insert best suited for? The CNMG 120404-TM T9215 is optimised for medium steel machining; the T9215 CVD coating enhances wear resistance for continuous to lightly interrupted cuts. Can the insert be used for finishing passes? Yes — the 0.4 mm corner radius and the double‑sided chipbreaker facilitate improved surface quality during finishing operations while maintaining adequate edge strength. How does the ISO CNMG120404 designation affect holder selection? ISO CNMG120404 specifies the plate geometry and size; matching holder form, relief angle, tolerance class, fastening and thickness ensures secure clamping and correct cutting geometry. Is the insert suitable for interrupted cuts? The T9215 grade provides good fracture toughness and is suitable for continuous to lightly interrupted cuts; heavy interruption may require a different geometry or a tougher grade. What advantages does the CVD coating offer? The CVD coating improves resistance to flank and crater wear, reducing tool degradation at elevated cutting speeds and supporting longer effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 4325 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404LC4325-SANDVIK Facts for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-4325-Sandvik 40END
CNMG 120404 4325 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404MF4325-SANDVIK ISO-Code: CNMG120404 Grade: 4325 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-120404-4325-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com