Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 120404 T9225 Wendeplatten - Tungaloy
Combine CVD-coated carbide grade T9225, ISO CNMG120404 geometry and a 0.4 mm corner radius for reliable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. CNMG120404 T9225 Turning indexable insert by Tungaloy — CVD-coated carbide, 80° rhombic The CNMG120404 T9225 indexable insert is an ISO-format turning insert designed for robust medium-to-heavy steel machining, offering a universal, CVD-coated carbide grade for variable cutting conditions. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel CNMG 120404, 80° rhombic insert form Double-sided chipbreaker with 0.4 mm corner radius High-performance cutting for variable steel operations The insert’s CVD-coated carbide substrate and the T9225 grade combine hardness with enhanced toughness, enabling consistent performance in demanding turning tasks. This composition is engineered for medium-to-heavy steel machining where variable engagement or slight interruptions occur; the coating increases wear resistance while the substrate maintains edge stability. The net effect is a longer effective tool life and fewer unscheduled indexings, which supports predictable cycle times and reduces process variability on lathes and turning centres. System compatibility and practical geometry advantages Engineered to ISO dimensions, the ISO CNMG120404 format ensures broad holder compatibility where form, relief angle, tolerance class, fixing method, size and thickness match. The 80° rhombic shape and 4.76 mm thickness provide a stable seating and good edge strength; the cylindrical hole enables secure clamping with standard screws and clamps. The specified 0° relief angle suits many external turning set-ups and demands correct holder selection to secure the required cutting clearance. These measurable attributes simplify integration into existing tool systems and help planners verify fit before purchase. Operational benefits: chip control, edge life and handling The double-sided chipbreaker geometry offers reliable chip control across a range of feeds, while the 0.4 mm corner radius balances strength and surface finish to reduce chatter risk on less rigid set-ups. As an indexable solution, the insert minimises downtime by providing multiple usable edges and straightforward replacement. The robust universal grade supports operators facing mixed batch production, where one insert must cope with slightly varying cuts. For production managers, this translates into reduced tool inventory complexity and improved spindle uptime. For dependable medium-to-heavy steel turning with the Tungaloy CNMG120404 T9225 insert, contact Metav Werkzeuge for tailored recommendations and prompt supply Technical data Article number: 6780908 Manufacturer SKU: TUN6780908 SKU: 6780908-Tungaloy Material: carbide Coating/grade: CVD-coated T9225 Facts Insert form: CNMG (rhombic), 80° Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical hole Special features Double-sided chipbreaker ISO turning indexable insert Universal grade for medium–heavy steel Suitable for interrupted or variable cuts Compatible with standard CNMG holders FAQ Which materials is this insert suitable for? The CNMG120404 T9225 insert is specified as a robust universal grade for medium-to-heavy steel machining and is optimised for variable engagement conditions. How does the T9225 grade affect performance? The T9225 CVD-coated carbide grade offers a combination of wear resistance and increased toughness, making the insert reliable under slightly interrupted cuts and fluctuating cutting conditions. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, improving edge life while helping achieve a consistent surface quality in general turning tasks. Is the CNMG120404 compatible with existing holders? Compatibility depends on matching the ISO CNMG form, size, thickness, relief angle and fixing method; the CNMG120404 format follows ISO dimensions to ensure broad holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T9235 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide quality, a double-sided chipbreaker and a secure 0° clearance for reliable turning in unstable or interrupted cutting conditions; order the CNMG120404 directly via Metav Werkzeuge or consult our application specialists for process optimisation. CNMG 120404 T9235 ISO turning insert (rhomboid, 0° clearance) – Tungaloy The CNMG120404 T9235 is an ISO rhomboid turning insert designed for external and internal turning of steel, offering a tough carbide grade for interrupted cuts and unstable machining situations. CVD-coated carbide grade T9235 Double-sided chipbreaker for interrupted cuts 0° clearance for secure seating Rhomboid form with cylindrical hole Reliable chip control even in interrupted turning The combination of a double-sided chipbreaker and a CVD-coated carbide substrate provides consistent chip formation under variable cutting conditions. The T9235 tough grade is formulated for steel at lower cutting speeds and for operations where the cut is interrupted or the setup lacks rigidity; this results in fewer tool failures and steadier cycle times. By stabilising chip flow, the insert helps to reduce rework and downtime, making production more predictable and cost-effective. Secure seating and ISO compatibility for fast tool changes The insert follows ISO standards and features a rhomboid form with a cylindrical hole, enabling straightforward mounting in matching holders. The 0° clearance ensures firm seating while the 80° geometry supports a broad range of turning tasks. Compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness; matching these parameters with the selected holder minimises vibration and promotes repeatable accuracy in both external and internal turning operations. Tough grade and coating for extended tool life A CVD coating on a carbide substrate gives the insert the wear resistance required for abrasive steels and intermittent cuts. The T9235 grade emphasises toughness over extreme hardness, which pays off where chipping risk is elevated or where surface contact is inconsistent. This balance between toughness and coating performance elevates tool life and reduces the frequency of insert changes, contributing to lower tooling costs per component and fewer machine stops. Practical application guidance and setup recommendations The ISO CNMG form is versatile for general turning; select the chipbreaker and grade to match the workpiece material, cutting parameters and machine stability. For steel and interrupted cuts, the T9235 grade with its 0.4 mm corner radius is a reliable choice to maintain edge strength while achieving acceptable corner definition. Ensure the holder matches the ISO geometry and that clamping components are in good condition to exploit the insert’s mechanical advantages and achieve consistent surface finish and dimensional control. For tailored advice on Tungaloy carbide inserts and to confirm the suitability of the CNMG120404 T9235 for specific turning tasks, contact Metav Werkzeuge for application support and technical documentation. Technical data Manufacturer article number: 6785805 SKU: 6785805-Tungaloy Manufacturer SKU: TUN6785805 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications ISO designation: CNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Shape angle: 80° Features & applications Material: carbide Coating/grade: T9235 (CVD-coated) Chipbreaker: double-sided Hole: cylindrical hole Plate shape: rhomboid Application: turning; suited to steel, interrupted cuts and unstable conditions FAQ Which materials is this insert best suited for? The CNMG120404 T9235 insert is optimised for steel; the T9235 grade and CVD coating make it particularly suitable for interrupted cuts and conditions where toughness is required. What are the key geometric features of the insert? The insert is an ISO CNMG120404 rhomboid with an 80° shape angle, 0° clearance, a 0.4 mm corner radius and a thickness of 4.76 mm, intended for turning operations. Can this insert be used for internal as well as external turning? Yes, the CNMG120404 design and its ISO conformity allow use in both external and internal turning when paired with a compatible holder. How does the chipbreaker affect performance? The double-sided chipbreaker improves chip control during interrupted cuts, reducing the likelihood of entanglement and promoting consistent surface quality when machining steel with the T9235 grade. What should be considered when choosing a holder for this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and repeatable machining performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade optimised for steel, a 0.4 mm nose radius and robust double-sided chip control to keep turning operations productive even under unstable or interrupted-cut conditions; order the insert via Metav Werkzeuge or consult our specialists for tailored advice. CNMG 120404 T9235 turning indexable insert — CVD-coated carbide, 0.4 mm radius (Tungaloy) The CNMG120404 T9235 is an ISO-standard rhombic indexable insert for external and internal turning, designed for steel machining with reliable chip control in unstable cutting conditions ISO CNMG 120404 form, rhombic geometry CVD-coated carbide grade T9235 for steel Double-sided chipbreaker for interrupted cuts 0.4 mm nose radius with cylindrical hole Longer tool life and consistent performance for tougher turning jobs The CVD-coated composition of this insert provides a hard, wear-resistant surface on a tough substrate, balancing edge protection with resistance to fracture. As a consequence, the T9235 grade is optimised for steel at moderate cutting speeds and in situations with variable stability, delivering longer tool life and fewer insert changes. The rhombic geometry combined with the double-sided chipbreaker helps to maintain controlled chip formation during both external and internal turning, reducing cycle interruptions and improving overall process reliability. Precise form and compatibility reduce setup time Conformance to the ISO CNMG 120404 specification ensures predictable fitment and repeatable results across standard holders. Key dimensional details — including the 0.4 mm nose radius, 4.76 mm thickness and the with cylindrical hole feature — simplify fixture selection and clamping. Clear specification of form, clearance angle and tolerance class enables straightforward matching with existing tooling systems, which shortens machine downtime and supports faster changeovers. This insert is therefore suitable where consistent geometry and straightforward replacement are priorities. Practical advantages for challenging and interrupted cuts When facing interrupted cuts or unstable workholding, impact resistance and chip evacuation are decisive. The combination of a tough carbide substrate and a protective CVD coating offers enhanced chip resistance, while the double-sided chipbreaker promotes manageable swarf and reduces heat concentration at the cutting edge. These properties result in improved surface finish and fewer secondary operations. For operations that demand steady throughput under variable conditions, this insert delivers efficiency gains and contributes to predictable production output. For precision turning with Tungaloy’s T9235 grade, contact Metav Werkzeuge for a tailored recommendation and fast supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785911 Manufacturer SKU: TUN6785911 SKU: 6785911-Tungaloy Model series: ISO turning indexable inserts Numeric data Size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Insert angle: 80° Designs & special features Material: carbide Grade/coating: T9235, CVD-coated carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO holder fit determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMG120404 T9235 indexable insert is designed primarily for steel machining; the T9235 grade provides toughness and wear resistance suited to interrupted cuts and less stable conditions. Can this insert be used for internal turning as well as external turning? Yes, the ISO CNMG 120404 form and rhombic geometry make the insert appropriate for both external and internal turning applications when used with the correct holder and mounting arrangement. What are the distinguishing features of the T9235 grade? The T9235 grade combines a tough carbide substrate with a CVD coating, offering a balance of fracture resistance and surface hardness that benefits performance in unstable cutting or interrupted operations. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on this insert promotes predictable chip formation and evacuation, which reduces downtime from chip-related issues and helps maintain consistent surface finish during turning. What should be checked for holder compatibility? Holder compatibility depends on insert form, clearance angle, tolerance class, fastening method, overall size and thickness; ensure these match the ISO CNMG 120404 specification for reliable clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide (T9235), ISO CNMG120404 geometry and a 0.4 mm nose radius for reliable turning results in unstable or interrupted cuts; order directly via Metav Werkzeuge or consult their application specialists for tailored recommendations. CNMG120404 T9235 ISO turning indexable insert — CVD‑coated carbide (Tungaloy) CNMG120404 T9235 is a rhombic, ISO‑standard indexable insert designed for turning applications, particularly suited to steel machining where interrupted cuts or limited stability demand a tough, wear‑resistant grade. CVD‑coated T9235 carbide grade ISO CNMG 120404 geometry 0.4 mm nose radius for fine finish Double‑sided chipbreaker, with cylindrical hole Consistent cutting performance under unstable conditions The T9235 grade is a CVD‑coated carbide chosen for its toughness and resistance to chipping at lower cutting speeds. In turning operations where machine or workpiece stability cannot be guaranteed, the tougher microstructure of this grade limits flank and crater wear, extending effective tool life and reducing unexpected interruptions. The 0.4 mm nose radius balances surface finish and cutting forces, enabling improved repeatability when finishing external diameters or performing light profile passes. Easy integration into ISO‑based tool systems Compatibility is assured by the ISO CNMG form: ISO CNMG120404 geometry, rhombic shape and standard mounting features make this insert compatible with a wide range of external holders and boring bars. Key parameters that determine a correct fit are form, 0° clearance, tolerance class, fastening method, size and 4.76 mm thickness. A typical system comprises the insert, a matched external holder or boring bar, a shim/clamp set and replacement screws — enabling quick replacement and minimised downtime. Reliable chip control and secure fixing for steel turning The double‑sided chipbreaker is tuned for chip segmentation during steel turning, helping to prevent long, stringy chips in interrupted cuts and improving operator safety. The insert is supplied with a cylindrical hole, which supports secure axial clamping and repeatable seating in the pocket. The CVD coating enhances thermal resistance and wear performance on steel; combined with the T9235 substrate it provides a productive solution for machining scenarios where toughness and process security are decisive. For robust turning of steel with the Tungaloy T9235 grade, contact Metav Werkzeuge for application advice and tailored recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6785912 SKU: 6785912-Tungaloy Manufacturer SKU: TUN6785912 Model series: ISO turning indexable inserts Item name: CNMG120404 T9235 Tungaloy insert Facts Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Thickness: 4.76 mm Insert size: 12 mm Special features CVD‑coated carbide (T9235) Rhombic insert shape (CNMG) Double‑sided chipbreaker With cylindrical hole Suitable for turning (steel emphasis) Compatible with holders per form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert intended for? This Tungaloy CNMG120404 T9235 insert is intended primarily for steel machining, especially where toughness is needed for interrupted cuts or less stable setups. How does the T9235 grade behave in interrupted cuts? The T9235 CVD‑coated carbide offers increased toughness and improved resistance to chipping during interrupted cuts, providing more consistent tool life under unstable conditions. Which holders fit this insert? Holders that accept the ISO CNMG120404 form and match the insert’s 0° clearance, size and thickness will be compatible; correct matching considers form, tolerance class and fastening method. What surface finish can be expected with this geometry? With a 0.4 mm nose radius and the double‑sided chipbreaker, the insert delivers good surface quality for finishing passes while maintaining controlled cutting forces. Is the insert reversible or single‑use per edge? The rhombic CNMG shape with a double‑sided chipbreaker provides multiple usable cutting edges; the insert can be indexed according to wear and application needs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T9235 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade and a double‑sided chipbreaker provides robust performance for interrupted cuts and unstable machining conditions; the insert’s ISO dimensions and cylindrical hole ensure straightforward mounting and rapid tool changes. Order the item through Metav Werkzeuge or consult their technical advisers for holder compatibility and process optimisation. CNMG 120404 T9235 ISO turning insert for turning — Tungaloy The CNMG120404 T9235 is an ISO rhombic turning insert designed for external and internal turning, offering a tough grade for steel under lower cutting speeds and interrupted cuts. CVD-coated carbide grade T9235 Designed for unstable cutting conditions Double-sided chipbreaker for chip control ISO rhombic insert with cylindrical hole Consistent chip control and durable cutting edge The CNMG120404 T9235 combines a CVD‑coated surface with a carbide substrate to extend edge life and resist flank wear in demanding applications. The double‑sided chipbreaker is engineered to deliver predictable chip formation, reducing the risk of built‑up edge and improving surface finish when turning steels. This results in fewer tool changes and more reliable cycle times on batch and single‑piece production, making the component a cost‑effective choice where process stability is a priority. Suited to unstable and interrupted machining The T9235 grade is formulated as a tough grade for steel, explicitly intended for lower cutting speeds and situations with strong interruptions or variable clamping. Under these conditions, the insert’s geometry and coating combination help absorb shock and avoid premature chipping, which supports longer tool life and consistent part quality. For shops facing frequent chatter or interrupted cuts, this insert offers a pragmatic balance between wear resistance and fracture toughness. ISO compatibility and secure mounting for quick tool changes As an ISO‑standard indexable plate, compatibility with a toolholder depends on form, clearance, tolerance class, fastening and thickness; the rhombic shape, 80° cutting angle and 0° clearance must be matched to the selected holder. The insert features a cylindrical hole for positive clamping and a 0.4 mm corner radius, while the plate thickness of 4.76 mm and size 12 mm conform to ISO limits for this designation. Verifying these dimensions against the holder drawing ensures repeatable seating and optimised cutting conditions. Practical advantages for workshop productivity In production environments the insert’s ISO form and standard screw hole support fast stock rotation and predictable logistics. The combination of CVD‑coated protection and a robust chipbreaker reduces downtime from edge failures and improves first‑pass yields, which enhances throughput without sacrificing part quality. Operators gain confidence from consistent chip evacuation and the insert’s capacity to withstand interrupted cuts, while engineers benefit from clear specification data for process planning. For application advice, availability checks or to request stock of the Tungaloy CNMG120404 T9235 turning insert (SKU TUN6785910), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and quote the SKU for rapid support Technical data Article number: 6785910 Manufacturer SKU: TUN6785910 SKU: 6785910-Tungaloy Model series: ISO turning indexable inserts Material: carbide Coating: CVD-coated Grade: T9235 Manufacturer: Tungaloy Facts Size (inscribed circle): 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 80° Clearance angle: 0° Special features Rhombic plate form Cylindrical hole for positive clamping Double-sided chipbreaker CVD coating for wear resistance Designed for steel and interrupted cuts ISO-compliant turning insert FAQ Which materials is this insert intended for? The CNMG120404 T9235 insert from Tungaloy is primarily specified for machining steel, especially where interrupted cuts or unstable conditions occur; refer to SKU TUN6785910 when enquiring about process limits. How is holder compatibility determined? Compatibility depends on insert form, clearance, tolerance class, fastening type, size and thickness; the CNMG120404 has a rhombic form, 80° angle and a cylindrical hole, so match these dimensions to the chosen holder and clamping set. What benefits does the CVD coating provide? A CVD‑coated surface on the carbide substrate improves wear resistance and maintains edge integrity under thermal and abrasive loads, contributing to longer tool life in turning operations on steel. Can the insert be indexed for multiple edges? Yes, the double-sided design allows indexing to a fresh cutting edge, offering economical use of the plate and reduced frequency of replacements. What is the corner radius and why does it matter? The corner radius is 0.4 mm, which balances edge strength and surface finish; a larger radius improves edge robustness, while a smaller radius favours finer surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, precise 80° rhombic geometry and a small nose radius for consistent results in unstable turning operations; order via Metav Werkzeuge or consult our specialists for selection and holder compatibility. CNMG 120404 T9235 indexable turning insert — rhombic 80°, CVD-coated carbide by Tungaloy CNMG120404 T9235 is an ISO-format indexable insert engineered for turning applications, offering a balanced solution for external and internal turning where interrupted cuts and unstable conditions demand a tough grade and reliable chip control. CVD-coated carbide grade T9235 for steel 80° rhombic shape for stable cutting 0.4 mm nose radius for fine surface finish Double-sided chipbreaker, cylindrical hole design Durable grade for demanding steel turning The insert uses the T9235 CVD-coated carbide grade, formulated to deliver elevated toughness for steel machining at reduced cutting speeds. This composition reduces fracturing under interrupted cutting and absorbs impacts from unstable set-ups, which results in more predictable wear behaviour and extended edge life. The practical effect is fewer unplanned tool changes and improved process stability when machining medium to heavy interrupted turning cycles. Geometry tuned for accuracy and surface quality The 80° rhombic geometry combined with a 0.4 mm nose radius provides a controlled contact area that supports both form turning and light finishing passes. A smaller nose radius improves dimensional accuracy and surface finish on critical diameters, while the 80° approach angle enhances radial support for the cutting edge. Compatibility with holders depends on form, clearance angle, tolerance class, fastening, size and thickness, so confirm mounting specifics when integrating the CNMG120404 T9235 into existing tool systems. Designed for efficient indexing and chip control Featuring a double-sided chipbreaker and a cylindrical hole, the insert accepts two cutting edges per index and locates securely in standard ISO clamping systems. The 4.76 mm plate thickness and 12 mm inscribed size give robust body support, reducing the propensity for vibration in less rigid set-ups. A chipbreaker with two usable faces aids repeatable chip formation and evacuation, lowering cycle interruptions and helping maintain consistent cycle times. Practical application guidance and tooling system notes Intended primarily for external and internal turning, the insert performs best when paired with a matching holder or boring bar selected for the intended cut depth and stability. Select the chipbreaker and grade according to the workpiece material and the nature of the cut: the T9235 grade excels on steel in lower-speed, high-impact scenarios. Ensure the chosen holder matches the insert’s form, 0° clearance angle specification, tolerance requirements and fastening method to achieve reliable seating and repeatable geometry. For robust, cost-effective turning with Tungaloy’s CVD-coated T9235 grade, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785913 Manufacturer SKU: TUN6785913 Stock SKU: 6785913-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / Core technical data Inscribed size: 12 mm Plate thickness: 4.76 mm Approach angle: 80° Nose radius: 0.4 mm Clearance angle: 0° Designs / Special features Grade/coating: T9235, CVD-coated carbide Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What workpiece materials is this insert suited to? The T9235 grade is tailored for machining steel; the insert provides enhanced toughness and chip control for interrupted cuts and unstable turning conditions. Can this insert be used for finishing passes? Yes, the small 0.4 mm nose radius and rhombic geometry support fine finishing and accurate diameter control when set up with appropriate feeds and holders. How is the insert mounted and indexed? The insert features a cylindrical locating hole and is secured in ISO-format holders; the double-sided chipbreaker allows two usable cutting edges before regrinding or disposal. Is this insert compatible with standard CNMG holders? Compatibility depends on holder form, fastening, tolerance class, size and plate thickness; confirm that the holder matches the ISO designation and the insert’s 4.76 mm thickness before assembly. What are the main benefits of the CVD coating on this grade? The CVD-coated surface enhances wear resistance while the core carbide maintains toughness, improving tool life under lower cutting speeds and during interrupted cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp TH10 uncoated carbide grade and a stable double‑sided chipbreaker for consistent turning results and efficient tool indexing; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and process advice. CNMG 120404 TH10 CNMG turning insert — uncoated carbide, 80° rhombic by Tungaloy A CNMG 120404 TH10 ISO‑standard turning insert designed for external and internal turning where low cutting forces and clean surfaces are required, especially on non‑ferrous materials. CNMG 120404 TH10 ISO rhombic insert Sharp uncoated carbide for non‑ferrous materials Double‑sided chipbreaker for stable chip control 80° corner angle, 0.4 mm corner radius Precise geometry for reliable external and internal turning The insert’s ISO‑standard geometry and 80° rhombic configuration deliver predictable cutting engagement and good access for external and internal operations. The rhombic form and the specified clearance angle 0° reduce interference at entry and exit, which benefits cycle stability and surface consistency. Because the design follows ISO norms, compatibility with appropriately dimensioned holders is ensured when form, tolerance class, fastening method, size and thickness are matched; this enables reliable tool changes and repeatable process set‑up in series production. TH10 uncoated carbide: low cutting forces and clean finishes on non‑ferrous work The TH10 grade is an uncoated carbide developed as a sharp, universal option for non‑ferrous materials and situations that favour minimal cutting forces. An uncoated cutting edge often improves chip formation and reduces built‑up edge when machining aluminium, copper alloys and similar materials, producing cleaner surfaces without the need for coating layers. For applications where thermal loading is moderate and surface integrity is critical, this grade supports efficient machining with reduced cutting energy and good dimensional control. Practical integration, chip control and economical indexing The insert’s double‑sided chipbreaker and central cylindrical hole simplify clamping and enable economical indexation during production. Sizes such as 12 mm nominal and a thickness of 4.76 mm give robust seat engagement, while the 0.4 mm corner radius balances edge strength with achievable surface finish. Correct selection of the matching holder and fastening hardware is essential; because compatibility depends on form, free angle, tolerance class, fastening and plate thickness, confirming those parameters prevents misfits and maintains process reliability. The construction supports straightforward indexing and reduces downtime, contributing to a productive machining cycle. Contact Metav Werkzeuge for application guidance on the Tungaloy TH10 insert and assistance with holder selection — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802017 Manufacturer SKU: TUN6802017 SKU: 6802017-Tungaloy Model series: ISO-Drehwendeschneidplatten Item name: CNMG120404 TH10 Tungaloy-Wendeplatte Facts Size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Corner radius: 0.4 mm Angle: 80° Special features Insert form: rhombic Hole: with hole (cylindrical) Chipbreaker: double-sided Grade/coating: TH10 (uncoated carbide) Material: carbide Application: turning Typical use: non‑ferrous materials FAQ Which materials are best machined with this insert? The CNMG120404 TH10 Tungaloy turning insert (SKU 6802017-Tungaloy) is optimised for non‑ferrous materials such as aluminium and copper alloys, where a sharp, uncoated carbide edge promotes clean chip formation and good surface quality. How does the TH10 grade compare to coated grades for finishing? TH10, as an uncoated carbide grade, often offers lower cutting forces and reduced built‑up edge on soft or ductile non‑ferrous alloys, whereas coated grades are typically chosen for abrasive or high‑temperature applications; the TH10 grade supports fine surface finishes in the right material range. What determines compatibility with a tool holder? Compatibility depends on the insert form, clearance angle, tolerance class, fastening type, size and thickness; ensure the holder matches the CNMG120404 geometry and mounting features to achieve secure clamping and correct tool projection. Is the insert indexable and how does the chipbreaker help? The double‑sided chipbreaker design allows the insert to be indexed to a fresh cutting edge when required, improving economy and uptime while maintaining consistent chip control and process stability. What surface quality can be expected when using this insert? When used in appropriate materials and with suitable cutting parameters, the TH10 uncoated carbide grade supports clean surfaces and low cutting forces, making it suitable for finishing passes on non‑ferrous components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 TH10 Wendeplatten - Tungaloy
Benefit from a sharp, uncoated carbide cutting edge in the TH10 grade and a 0.4 mm nose radius for low cutting forces and clean surface finishes; the double-sided chipbreaker and ISO CNMG geometry provide economical edge changes and consistent results. Order the inserts directly via Metav Werkzeuge or request tailored cutting data from the consultants. CNMG120404 TH10 – CNMG turning indexable insert (rhombic, 0° relief) by Tungaloy A CNMG120404 TH10 insert for ISO-standard turning applications, optimised for non‑ferrous materials and jobs that demand low cutting forces and fine surface quality. Uncoated carbide TH10 grade Rhombic CNMG geometry, ISO 120404 0.4 mm nose radius for fine finishes Double-sided chipbreaker, economical use Consistent cutting performance for turning operations The ISO-format indexable insert is designed for stable, repeatable turning tasks on lathes and turning centres. The uncoated carbide substrate in TH10 delivers a sharp, low-friction cutting edge that reduces cutting forces and helps achieve a clean surface on non‑ferrous workpieces. The rhombic CNMG geometry with an 80° included angle combines rigidity with accessible cutting edges, making the insert suitable for both external and internal turning when matched with an appropriate holder. The 0° relief should be considered during holder selection, as compatibility with the toolholder depends on geometry, tolerance class and fastening method. Economical edge life and straightforward re-indexing A double-sided chipbreaker offers multiple usable edges per insert; this lowers tooling cost per cutting edge and simplifies changeover. For applications where low cutting forces are essential—such as machining brass, aluminium alloys and other non‑ferrous materials—the uncoated TH10 grade helps avoid built‑up edge and promotes consistent chip formation. The 0.4 mm nose radius balances strength and surface finish: small radii improve detail and leave finer finishes, while the CNMG shape ensures sufficient support for moderate radial depths of cut. Practical guidance for selection and use Compatibility with the holder is determined by form, relief angle, tolerance class, fastening and plate thickness. The insert’s 4.76 mm plate thickness and 12 mm inscribed circle must match the seat and clamp of the selected cartridge or boring bar. The cylindrical centre hole enables secure clamping and precise positioning. Choose the chipbreaker variant that fits the workpiece material and the expected level of machining stability; the chip control influences surface quality and cycle time as much as substrate choice. Application scope and recommended setups Designed within the ISO turning insert system, this rhombic insert performs well in operations requiring a sharp, uncoated cutting edge. Typical uses include short‑chipping non‑ferrous components and finishing passes where low cutting force and a tidy surface are priorities. For roughing or highly interrupted cuts, consider a geometry and grade combination optimised for increased edge strength. When in doubt, reference the ISO series system and the insert’s measured data—12 mm inscribed circle, 4.76 mm thickness, 0.4 mm nose radius, 80° included angle—to match the correct holder and clamping set. Contact Metav Werkzeuge to request detailed cutting parameters, secure original Tungaloy CNMG120404 TH10 inserts and receive application-specific advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801966 Manufacturer article number: 6801966 Manufacturer SKU: TUN6801966 SKU: 6801966-Tungaloy Designation: CNMG120404 TH10 Dimensions & angles Inscribed circle: 12 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Included angle: 80° Materials & features Grade: TH10 Substrate: uncoated carbide Geometry: rhombic, CNMG (ISO 120404) Chipbreaker: double-sided Hole: cylindrical hole Application: Turning (external and internal) FAQ What materials are best machined with this insert? The CNMG120404 TH10 insert from Tungaloy is intended primarily for non‑ferrous materials and applications where a sharp, uncoated edge reduces cutting forces and improves surface finish. How does the double-sided chipbreaker affect tool life? A double-sided chipbreaker provides additional usable cutting edges, allowing re‑indexing to a fresh edge and lowering the cost per effective edge while maintaining effective chip control. Is the insert compatible with standard ISO CNMG holders? Compatibility with ISO CNMG holders depends on form, relief angle, tolerance class, fastening and plate thickness; the insert’s ISO designation and dimensions (12 mm IC, 4.76 mm thickness) should be matched to the holder seat. What does a 0° relief angle mean for setup? A 0° relief denotes a neutral relief geometry that must be matched to the holder geometry; it can affect cutting contact and requires correct seating and clamping to ensure proper cutting conditions. How should the 0.4 mm nose radius be used in finishing? The 0.4 mm radius offers a balance between edge strength and surface finish, making it suitable for fine finishing passes where a controlled surface texture is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precision, low cutting forces and easy integration into established tool systems for efficient turning operations; order genuine inserts via Metav Werkzeuge or consult the technical team for compatibility and application advice. CNMG 120404 TH10 Tungaloy indexable insert for turning — ISO rhombic geometry, 0.4 mm radius CNMG 120404 TH10 Tungaloy indexable insert offers a compact solution for general turning tasks, designed for reliable performance in a wide range of non-ferrous applications. ISO‑standard rhombic insert, size 12 Uncoated carbide grade TH10 for low cutting forces 0.4 mm corner radius for precise surface finish Double‑sided chipbreaker for consistent chip control Cylindrical hole for secure screw mounting Consistent cutting performance with an ISO‑conforming design The CNMG120404 TH10 insert combines an ISO‑standard outline with a rhombic geometry that supports versatile turning operations. The uncoated carbide composition (grade TH10) is formulated to provide low cutting forces, which reduces spindle load and supports stable cutting at modest feeds. Reduced cutting effort contributes directly to longer tool life in many non-ferrous machining tasks and helps to maintain dimensional stability on the workpiece. The indexable nature of the plate enables quick orientation changes and efficient use of the cutting edge, supporting uninterrupted production cycles and predictable process planning. Geometry and edge design that improve surface quality The plate’s 0.4 mm corner radius and double‑sided chipbreaker are engineered to balance cutting strength with finish quality. A small corner radius like 0.4 mm enables finer external radii and improved surface finish on light‑duty turning and semi‑finishing operations. The double‑sided chipbreaker enhances chip segmentation on both edges, aiding consistent evacuation when machining short and medium chips. The insert’s 0° relief angle and rhombic shape influence the effective rake and engagement, so the insert can be selected to favour either surface finish or heavier material removal depending on the holder and cutting conditions chosen. Practical compatibility and application guidance for tool systems Compatibility with holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the CNMG120404 is supplied with a cylindrical hole for standard screw clamping to most ISO‑compatible external holders and boring bars. The plate thickness of 4.76 mm and the standardised insert size provide straightforward replacement in existing tool rigs. The grade TH10 is a sharp, uncoated universal grade recommended primarily for non‑ferrous materials, where a clean cutting edge helps to avoid built‑up edge and secures superior surface finishes. For system assembly, pair the insert with a correctly matched external holder, backing pad and replacement screws specified for the holder series to ensure repeatable clamping and positional accuracy. Request a quotation or technical consultation from Metav Werkzeuge to source genuine Tungaloy CNMG 120404 TH10 inserts and confirm holder compatibility for the intended turning application — contact Metav Werkzeuge for fast, application‑oriented advice Technical data Article number: 6801962 Manufacturer SKU: TUN6801962 Model series: ISO‑Drehwendeschneidplatten Designation: CNMG120404 TH10 Tungaloy insert Material: Carbide Dimensions & key figures Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: with hole (cylindrical) Special features Rhombic plate shape Double‑sided chipbreaker Cylindrical hole for screw fixing Uncoated carbide grade TH10 ISO‑standard turning insert FAQ What materials is this insert best suited for? The CNMG 120404 TH10 Tungaloy insert is optimised for non‑ferrous materials and applications where an uncoated, sharp carbide edge supports low cutting forces and clean surfaces. How is the insert mounted in a toolholder? Mounting is by conventional screw clamping: the plate is supplied with a cylindrical hole for secure fixing to ISO‑compatible external holders and boring bars. Does the corner radius affect finishing capability? Yes — the 0.4 mm corner radius supports finer surface finishes and more accurate external profiles while maintaining adequate edge strength for light to moderate turning. Is this a single‑edge or multi‑edge solution? The plate is double‑sided and indexable, offering two usable cutting edges per side and permitting economical re‑indexing to renew the cutting edge. What should be checked for holder compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; matching these parameters ensures correct seating and repeatable performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 WF 1115 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications for indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF1115-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-1115-Sandvik 40END
CNMG 120404 WF 1125 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF1125-SANDVIK Facts for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1125 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-1125-Sandvik 40END
CNMG 120404 WF 1515 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Information on technical features indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF1515-SANDVIK ISO-Code: CNMG120404 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-1515-Sandvik 40END
CNMG 120404 WF 1525 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product features CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF1525-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1525 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-1525-Sandvik 40END
CNMG 120404 WF 2015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF2015-SANDVIK ISO-Code: CNMG120404 Grade: 2015 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: WF Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-2015-Sandvik 40END
CNMG 120404 WF 3005 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF3005-SANDVIK Facts for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 3005 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-3005-Sandvik 40END
CNMG 120404 WF 3210 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics for insert CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF3210-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 3210 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-3210-Sandvik 40END
CNMG 120404 WF 3225 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF3225-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Features Material: cemented carbide Grade: 3225 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-120404-3225-Sandvik 40END
CNMG 120404 WF 4315 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for CNMG 120404 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF4315-SANDVIK Figures for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-4315-Sandvik 40END
CNMG 120404 WF 4415 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics for CNMG 120404 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF4415-SANDVIK Facts and Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-4415-Sandvik 40END
CNMG 120404 WF 4425 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF4425-SANDVIK Facts for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4425 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CNMG-120404-4425-Sandvik 40END
CNMG 120404 WF 5015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics for CNMG 120404 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WF5015-SANDVIK Dataand Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: WF with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-5015-Sandvik 40END
CNMG 120404 WL 1525 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Information on technical features for CNMG 120404 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WL1525-SANDVIK Facts / Figures: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 1525 Chip Breaker: WL with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-1525-Sandvik 40END
CNMG 120404 WL 4315 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts CNMG 120404 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WL4315-SANDVIK Facts for the tool: ISO-Code: CNMG120404 Clearance Angle: 0° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WL with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-120404-4315-Sandvik 40END
CNMG 120404 WL 4415 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Detail specifications CNMG 120404 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG120404WL4415-SANDVIK ISO-Code: CNMG120404 Grade: 4415 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 4,76mm Radius: 0.4 Chip Breaker: WL Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-120404-4415-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com