Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a robust 1.2 mm corner radius and ISO conformity for consistent, productive turning results; order the insert directly via Metav Werkzeuge or request compatibility advice from their consultants. CNMG 160612 T9205 indexable insert for turning by Tungaloy — rhombic 80° geometry, CVD-coated grade CNMG160612 T9205 indexable insert designed for productive external and internal turning on steel under stable cutting conditions CNMG 160612 geometry for ISO turning CVD-coated carbide grade T9205 for steel 80° rhombic form with 1.2 mm corner radius Double-sided insert with cylindrical hole Consistent productivity from a CVD-coated carbide grade The CVD-coated cemented carbide grade T9205 is developed for productive machining of steel at elevated cutting speeds while maintaining wear resistance. The coating adds a hard, thermally stable surface that reduces flank wear and heat-related loss of edge life; this results in improved tool life and more predictable machining cycles. For operations where process stability and repeatable performance matter, the coated grade supports longer uninterrupted cutting times and reduces the frequency of tool changes, contributing to lower overall machining costs. Precise geometry for reliable clamping and repeatability The rhombic 80° shape with a 0° clearance and standard ISO dimensions ensures straightforward integration into common external holders and boring bars. Compatibility with a clamping system depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-conformant geometry simplifies selection of the correct holder. The insert’s cylindrical locating hole and standard thickness of 6.35 mm provide secure seating and repeatable indexability, helping to maintain concentricity and surface finish across multiple indexings. Stable chip control and stronger cutting edge Equipped with a double-sided chipbreaker, the insert offers balanced chip formation for many turning operations, enhancing evacuation and reducing the risk of built-up edge under recommended conditions. The 1.2 mm corner radius increases edge strength where contouring and moderate interrupted cuts occur, supporting better surface integrity and dimensional stability. In short cycle applications the combination of corner radius and chip control contributes to consistent component quality and lower scrap rates. System-oriented handling and application guidance The insert is part of an ISO indexable insert system that includes the mating external holder, shim/clamping set and replacement screws. When specifying for a shop, select the chipbreaker and grade that match the workpiece, machining strategy and machine rigidity; for this grade, stable setups and higher cutting speeds are ideal. The insert’s rhombic form and double-sided design mean two working edges per side, enabling economical use of the insert in serial production and straightforward inventory management. Contact Metav Werkzeuge for tailored holder compatibility checks and to source the Tungaloy CNMG160612 T9205 indexable insert directly; consultants are available to advise on optimal grade and chipbreaker selection. Technical Data Article number: 6785700 Manufacturer SKU: TUN6785700 Stock SKU: 6785700-Tungaloy Model series: ISO indexable turning inserts Material: cemented carbide Application: Turning Facts Cutting angle: 80° Corner radius: 1.2 mm Thickness: 6.35 mm Size: 16 mm Clearance angle: 0° Hole: with cylindrical hole Special features Grade: T9205 Coating: CVD-coated Shape: rhombic Chipbreaker: double-sided Insert designation: CNMG160612 Suitable for external and internal turning ISO-conformant geometry FAQ What materials is this insert intended for? The Tungaloy CNMG160612 T9205 indexable insert is optimised for machining steel in stable cutting conditions; the CVD-coated cemented carbide grade offers wear resistance at higher cutting speeds. How does one confirm holder compatibility for this ISO insert? Compatibility is determined by the ISO geometry and by matching holder form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG160612 designation helps to select the correct external holder or boring bar. What advantages does the T9205 grade provide compared with uncoated grades? T9205’s CVD-coated surface increases thermal and abrasive resistance versus uncoated carbide, yielding longer edge life and more consistent performance when turning steel at elevated speeds. How many usable cutting edges are available per insert? Due to the double-sided configuration and the rhombic form, the insert can be indexed multiple times; the CNMG160612 design provides economical reuse of cutting edges for serial production. Is the insert suitable for internal as well as external turning? Yes — the ISO CNMG geometry and the cylindrical locating hole allow use in suitable external holders and boring bars for both external and internal turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Stable edge life from the T9205 CVD‑coated carbide together with the robust 80° CNMG geometry ensures consistent, productive turning of steel; the double‑sided design and 1.2 mm corner radius deliver economical indexable performance — order the CNMG160612 T9205 directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. CNMG 160612 T9205 Turning indexable insert by Tungaloy, CVD‑coated carbide, 80° The CNMG160612 T9205 Tungaloy insert is an ISO‑standard indexable insert for productive external and internal turning, developed for stable machining of steel at elevated cutting speeds. CVD-coated carbide grade T9205 Optimised for productive steel turning 80° geometry for robust cutting Double-sided insert with 1.2 mm radius Increase productivity with a wear-resistant carbide grade The combination of a CVD‑coated carbide substrate and the T9205 grade is engineered for sustained performance in demanding turning operations. The coating improves wear resistance and heat tolerance, which translates into longer tool life under higher cutting speeds and consistent dimensional results. For production environments where cycle time and reproducibility matter, this graded carbide keeps process stability high and frequency of index changes low, improving overall throughput and lowering running costs. Geometry designed for stability and versatility The insert’s 80° approach geometry and 0° relief angle provide a balance of cutting-edge strength and general-purpose versatility; the slightly blunt orientation increases resistance to mechanical loads while remaining suitable for both finishing and medium‑depth cuts. The 1.2 mm corner radius contributes to edge robustness, reducing the risk of chipping on interrupted cuts and supporting steady surface quality. The double‑sided layout doubles index life per insert, making it a cost‑effective choice for batch production. Clear compatibility and straightforward setup As an ISO‑standard turning plate, compatibility with holders is defined by form, relief angle, tolerance class, clamping method, size and thickness. The CNMG160612 format fits standard CNMG external and boring holders that accept a 16 mm inscribed circle and a 6.35 mm plate thickness. The insert’s cylindrical hole supports secure clamping and repeatable positioning, simplifying changeovers and ensuring alignment accuracy. Choosing the correct chipbreaker variant and matching the grade to material and machine rigidity maximises performance. Practical benefits for everyday machining When processing steel under stable conditions, this insert offers a reliable blend of process security and value: fewer interruptions from edge failures, predictable wear behaviour and easier planning of tool inventories. The double‑sided indexable design reduces per‑cut cost, while the T9205 coating maintains cutting performance across longer tool life. For workshops seeking to combine productivity with consistent surface quality, the insert provides measurable efficiency gains without adding complexity to setup and programming. Contact Metav Werkzeuge today to discuss the CNMG160612 T9205 turning insert, request cutting data or receive tailored recommendations for holders and chipbreakers — Metav Werkzeuge’s team is ready to advise. Technical data Article number: 6785680 Manufacturer SKU: TUN6785680 SKU: 6785680-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle: 16 mm Approach angle: 80° Relief angle: 0° Special features CVD-coated carbide (T9205) Double-sided chipbreaker Rhomboidal plate shape With cylindrical hole ISO designation CNMG160612 Application: turning of steel FAQ Which materials is this insert best suited for? The T9205 grade is optimised for productive turning of steel; the CNMG160612 insert performs well in stable cutting conditions and at elevated speeds. Is the insert indexable and double‑sided? Yes, the CNMG160612 is a double‑sided indexable insert, providing two usable edges per side for economical usage. What does the 80° geometry mean for machining? An 80° approach angle increases edge strength and gives versatility across finishing and medium‑depth turning applications, offering good balance between cutting forces and surface finish. How is compatibility with holders ensured? Compatibility depends on form, relief angle, tolerance class, clamping type, size and thickness; CNMG160612 fits holders designed for CNMG format with 16 mm inscribed circle and 6.35 mm plate thickness. Which chipbreaker should be selected? Select a chipbreaker that matches the workpiece material, depth of cut and machine stability; the insert is available with the specified double‑sided chipbreaker suitable for common steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9205 for high productivity and the CNMG160612 geometry with a 1.2 mm corner radius for consistent edge life; order directly via Metav Werkzeuge or contact our advisers for application-specific advice. CNMG160612 T9205 turning insert — Tungaloy CNMG160612 T9205 is an ISO‑standard turning insert designed for productive external and internal turning under stable conditions CVD-coated carbide grade T9205 Rhombic 80° geometry, 1.2 mm radius Double-sided chipbreaker for stable cuts ISO-standard CNMG with cylindrical hole Delivering sustained productivity with CVD-coated carbide The CVD‑coated T9205 grade combines a wear-resistant coating with a robust carbide substrate to support higher cutting speeds and extended tool life. In practice, this means fewer insert changes and more uptime on production machines. The coating improves abrasion resistance during interrupted cuts and long light-duty turning cycles, while the substrate sustains edge stability under stable clamping conditions. These properties translate into a measurable increase in productivity for batch and continuous turning operations. Geometry that ensures predictable component quality The rhombic 80° shape and 1.2 mm corner radius provide a compromise between strength and profile control, making the insert suitable for medium to heavy turning passes where dimensional stability matters. The 0° relief angle is typical for this family and aids in maintaining constant cutting engagement; the double-sided chipbreaker promotes consistent chip formation and evacuation. Compatibility with the toolholder depends on form, relief, tolerance class, fastening, size and thickness, so correct holder selection is essential for repeatable surface finish and tool life. ISO standardisation simplifies tooling decisions As an ISO‑turning insert, the CNMG160612 fits into standard toolholder systems when dimensions match, and the cylindrical hole supports secure clamping and indexing. The plate thickness of 6.35 mm and the nominal size of 16 mm are common values that ease stock management and replacement planning. Using ISO‑standard components reduces setup variation and supports predictable cycle times across different machines and shifts, which benefits line balancing and order fulfilment. Best applications and material focus This insert is optimised for turning steel under stable conditions and at elevated cutting speeds, where the wear-resistant coating shows its strengths. Choose the T9205 grade when a consistent combination of surface quality and sustained edge life is required. For different workpiece materials or unstable setups, select an alternative chipbreaker or grade matched to the specific alloy and cutting parameters to maintain safety margins and efficiency. Contact Metav Werkzeuge for tailored application support and to source the Tungaloy CNMG160612 T9205 insert; specialist advice and prompt delivery are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785788 SKU: 6785788-Tungaloy Manufacturer item no.: TUN6785788 Model series: ISO turning inserts Material: carbide Designation: CNMG160612 T9205 Facts Corner radius: 1.2 mm Included angle: 80° Relief angle: 0° Thickness: 6.35 mm Size: 16 mm Hole: cylindrical (with hole) Design and special features CVD‑coated carbide, grade T9205 Rhombic plate form Double-sided chipbreaker ISO‑standard insert, compatible with ISO holders System composition: insert, external holder or boring bar, support/clamp set and spare screws FAQ What materials is this insert intended for? This insert is designed primarily for turning steel; the T9205 grade is a wear‑resistant CVD‑coated carbide optimised for productive steel turning under stable conditions. How does the chipbreaker affect performance? The double‑sided chipbreaker on the CNMG160612 promotes reliable chip control and evacuation, which helps maintain consistent surface finish and reduces the risk of chip entanglement during medium to heavy cuts. Will this insert fit existing CNMG holders? Compatibility depends on form, relief, tolerance class, fastening, size and thickness; the CNMG160612 is ISO‑dimensioned, but holders must match the 16 mm size, 6.35 mm thickness and cylindrical hole for secure clamping. What corner radius is available and when should it be used? The insert features a 1.2 mm corner radius, a good choice for achieving a balance between edge strength and dimensional control on parts that require consistent profiles. Can the CNMG160612 T9205 be indexed to use both sides? Yes, the plate is double‑sided; indexing extends usable life and supports economical part runs when the holder and clamping system allow safe re‑indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and the ISO CNMG geometry for efficient, high‑throughput turning in medium steels; the insert’s double‑sided chipbreaker and robust corner radius support continuous to lightly interrupted cuts. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting recommendations. CNMG160612 T9215 turning insert (ISO) — Tungaloy, rhombic 16 mm, 0° clearance A CNMG160612 T9215 ISO rhombic turning insert designed for medium steel machining; CVD‑coated carbide for enhanced wear resistance and stable cutting in continuous and lightly interrupted turning operations CVD-coated carbide grade T9215 ISO rhombic insert CNMG160612 Double-sided chipbreaker for turning 16 mm size, 1.2 mm corner radius Boosted productivity through material and coating technology The insert combines a CVD-coated surface with a wear‑resistant carbide substrate, providing a balance of wear resistance and fracture toughness that supports higher machining speeds and longer tool life. For workshop planners and production engineers, this means fewer indexings and more consistent component quality across runs. The chosen grade T9215 is optimised for medium steel and performs reliably in continuous to slightly interrupted cuts, reducing downtime and maintaining surface finish without the need for frequent regrinding. Precision fit and predictable system behaviour The ISO CNMG160612 geometry ensures predictable seating and repeatable orientation in standard holders; compatibility depends on form, clearance, tolerance class, fixation, size and thickness. Key dimensions such as 16 mm inscribed circle, 6.35 mm plate thickness and an 80° included angle provide the mechanical stability required for external and internal turning. The insert’s cylindrical hole and standard mounting pattern make replacement straightforward when paired with the correct backing pad and clamping set. Selecting the right holder and clamp avoids chatter and preserves the insert’s performance characteristics. Practical guidance for machining and system assembly Use the double‑sided chipbreaker when cutting medium steels to promote controlled chip formation and consistent evacuation; this reduces tool temperature and helps maintain dimensional accuracy. The insert is supplied as part of a system comprising the ISO insert, a matching external holder or boring bar, a backing plate/clamp kit and replacement screws — ensure all components meet the same tolerance class for best results. For interrupted cuts, verify clamping rigidity and consider reduced depth of cut; for long production runs, the grade’s robustness supports higher material removal rates with stable edge life. For precise holder selection and delivery of CNMG160612 T9215 inserts, contact Metav Werkzeuge for an application review and the required article details; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772496 Manufacturer SKU: TUN6772496 SKU: 6772496-Tungaloy Material: carbide Coating: CVD Facts Inscribed circle: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance (relief): 0° Hole: cylindrical Special features ISO rhombic CNMG geometry Double-sided chipbreaker Suited for external and internal turning Optimised for medium steel machining Compatible with standard ISO holders and clamping kits Suitable for continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance with toughness for productive turning. Is the insert reversible or indexable? Yes, the insert is double‑sided and indexable, allowing rotation to a fresh cutting edge to extend tool utilisation. Which holder types are compatible with this geometry? Standard ISO holders and boring bars designed for CNMG inserts will be compatible, provided form, clearance, tolerance class, fixation, size and thickness match. How does the CVD coating benefit machining? The CVD coating on the carbide substrate improves surface hardness and wear resistance, resulting in longer edge life and more consistent performance in continuous cutting. What should be checked when assembling the cutting system? Ensure the backing pad/clamp kit and replacement screws match the insert’s tolerance class and that clamping rigidity is sufficient for the intended depth of cut and material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable edge security of the CVD-coated T9215 grade deliver consistent, productive performance in medium steel turning; the rhombic 80° geometry with a 1.2 mm corner radius supports stable chip control and reduced tool changes. Order the CNMG160612 T9215 insert directly via Metav Werkzeuge or consult the team for application-specific guidance. CNMG 160612 T9215 ISO turning insert by Tungaloy — rhombic 80° geometry for medium steel The CNMG160612 T9215 Tungaloy insert is an ISO-standard rhombic indexable turning insert designed for external and internal turning tasks, offering a robust combination of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide T9215 grade Optimised for medium steel machining Double-sided chipbreaker for stable chips ISO CNMG 80° with cylindrical hole Consistent productivity through a high-performance grade The CVD-coated T9215 grade provides a controlled balance of wear resistance and fracture toughness, which translates into longer cutting edges under continuous operation and fewer unplanned tool changes. In practice, this means more consistent cycle times and improved part quality when machining medium-strength steels. The coating reduces flank and crater wear, while the carbide substrate preserves the edge under elevated mechanical loads, together supporting higher productivity without sacrificing process stability. Seamless compatibility within ISO toolholder systems As an ISO-series insert, compatibility depends on geometry, relief angle, tolerance class, fastening and thickness; the rhombic CNMG form and the presence of a cylindrical hole ensure positive seating in many standard external holders and boring bars. With a plate size of 16 mm, a thickness of 6.35 mm and an 80° cutting edge angle, the insert integrates into common tool systems when the holder specification matches these parameters. This predictable fit reduces set-up time and simplifies tool inventory management across workshops. Design features that reduce machining risk and improve chip control The double-sided chipbreaker design paired with a 1.2 mm corner radius promotes stable chip formation and helps avoid built-up edge during continuous feeds. A cylindrical hole facilitates secure clamping and repeatable repositioning, which reduces the risk of insert movement under heavy loads and improves repeatability of part geometry. These characteristics lower the incidence of machining interruptions and contribute to a smoother production flow. Practical selection and handling advice for longer life Select the chipbreaker and cutting conditions according to material, type of cut and machine stability: the T9215 grade is the first choice for medium steel where a balance of productivity and tool life is required. Using appropriate feeds, speeds and consistent coolant application extends the effective tool life, while correct torque on the clamp and verified seating prevent premature failures. Regular inspection of the cutting edge and prompt indexing of the double-sided insert keep component tolerances stable and reduce unit costs over production runs. Contact Metav Werkzeuge for availability, specification advice or to request the Tungaloy CNMG160612 T9215 insert (SKU TUN6772201) and ensure optimal selection for the intended turning application Technical data Article number: 6772201-Tungaloy Manufacturer SKU: TUN6772201 Manufacturer article number: 6772201 Facts Material: Carbide Coating: CVD Grade: T9215 ISO designation: CNMG160612 Special features Geometry: rhombic, 80° cutting edge angle Thickness: 6.35 mm Size: 16 Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Series: ISO turning inserts FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel applications; the T9215 CVD-coated carbide grade balances wear resistance and toughness for productive turning. How does the double-sided chipbreaker affect machining? A double-sided chipbreaker provides controlled chip formation on both cutting edges, improving surface finish and reducing the likelihood of clogging during continuous to slightly interrupted cuts. Which toolholders are compatible with this ISO insert? Compatibility requires matching form, relief angle, tolerance class, fastening, size and thickness; the CNMG160612 shape and the cylindrical hole fit standard ISO CNMG holders when specifications align. What are the key dimensions to check before ordering? Verify the plate size (16), thickness (6.35 mm), cutting edge angle (80°) and corner radius (1.2 mm) to ensure correct seating and performance in the chosen holder. Is the insert supplied with fixing hardware? The supplied data covers the insert; system components such as suitable holders, clamp sets and replacement screws are part of the overall tooling system and should be procured according to the machine and holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Combine the T9215 grade's high wear resistance with the stable rhombic geometry and a 1.2 mm corner radius to maintain productive turning cycles; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG 160612 T9215 CNMG turning insert, 80° rhombic, CVD‑coated by Tungaloy The CNMG 160612 T9215 is an ISO‑standard turning insert designed for external and internal turning operations, offering a balance of wear resistance and fracture toughness for medium steel machining. CVD-coated carbide grade T9215 80° rhombic insert geometry Double-sided with cylindrical hole 1.2 mm corner radius, 6.35 mm thickness Stable productivity for medium‑steel turning The CVD‑coated T9215 carbide combines high wear resistance with controlled toughness, making it particularly effective for continuous and lightly interrupted cuts on medium‑strength steels. The coating reduces flank and crater wear, which prolongs usable life under regular production conditions. For operations prioritising throughput, this grade supports extended tool life while maintaining dimensional stability, so machining cycles remain predictable and downtime is reduced. Accurate geometry that supports repeatable results The 80° rhombic geometry and 1.2 mm corner radius deliver a reliable cutting edge that balances strength and surface finish. A larger corner radius increases edge stability and helps to smooth surface irregularities, while the rhombic form provides good entry and exit angles for external and internal turning. The insert is double‑sided and features a cylindrical hole, enabling indexing to a fresh cutting edge and secure clamping in compatible holders; this design reduces tooling costs per machined part and simplifies inventory management. Straightforward integration into ISO tool systems As an ISO standard insert, the component fits established systems when paired with a suitable external holder or boring bar, plus the required backing/clamping set and replacement screws. Compatibility depends on shape, relief angle, tolerance class, fastening method, size and thickness, so toolholders must be selected to match these parameters. The 6.35 mm thickness and 16 mm inscribed circle allow robust clamping forces, which supports stable cutting conditions and reduces vibration in demanding setups. Practical guidance to extend tool life and process reliability Selecting the correct chipbreaker and matching the grade to workpiece stability are decisive steps for consistent performance. The double‑sided construction enables cost‑efficient indexing, while the CVD‑coated carbide substrate tolerates elevated cutting speeds typical of productive turning. For interrupted cuts or unstable set‑ups, consider adjusting feeds and engaging a more robust chip control geometry; for steady, continuous cuts the insert will deliver low wear rates and repeatable surface quality. Regular inspection of clamping torque and insert seating will prevent edge chipping and maintain machining accuracy. For tailored advice on machining parameters with Tungaloy’s T9215 inserts or to request stock and delivery information, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and fast processing. Technical data Article number: 6772180 Manufacturer SKU: TUN6772180 SKU: 6772180-Tungaloy ISO designation: 160612 Designation: CNMG160612 Facts Geometry angle: 80° Inscribed circle / size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Double‑sided: yes Special features Material: carbide substrate Coating: CVD coating Chipbreaker: double‑sided Hole style: cylindrical hole, with hole Plate shape: rhombic Series: ISO turning inserts Typical application: external and internal turning Suitability: continuous to lightly interrupted cuts FAQ Which materials is this insert best suited for? The CNMG 160612 T9215 insert is specified as a first choice for medium‑strength steel machining, combining wear resistance and fracture toughness for productive turning operations. What does the T9215 grade offer compared with other grades? T9215 denotes a CVD‑coated carbide grade that balances high wear resistance with robust edge strength, making it suitable for continuous to lightly interrupted cutting where consistent tool life is required. Is the insert indexable and how is it secured in the holder? Yes, the CNMG 160612 is double‑sided and indexable; it locates and is clamped via a central cylindrical hole and the matching clamping set on the chosen toolholder. Which toolholders work with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the insert requires a holder or boring bar designed for CNMG‑format ISO inserts and appropriate clamping hardware. Can this insert handle interrupted cuts or unstable set‑ups? The CNMG 160612 T9215 is intended for continuous to slightly interrupted cuts; for heavy interruptions or very unstable set‑ups a more fracture‑resistant grade or a geometry with enhanced chip control is recommended. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Benefit from high wear resistance, fracture toughness and ISO compatibility for reliable, productive turning. Order the CNMG160612 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG160612 T9215 turning insert by Tungaloy CNMG160612 T9215 is an ISO‑standard rhombic indexable insert designed for general turning operations in production environments, combining a CVD coating and a robust carbide substrate for efficient material removal. CVD-coated carbide T9215 Optimised for medium steel machining Double-sided chipbreaker for reliability ISO rhombic CNMG 16 profile Consistent cutting performance for production turning The CVD-coated carbide substrate in this insert delivers a balanced combination of wear resistance and fracture toughness, making it a dependable choice for continuous and light interrupted turning. The grade T9215 is formulated specifically for mid‑range steel machining, providing a stable cutting edge that maintains dimensional control over extended tool life. By using an ISO standard insert geometry, process parameters can be standardised across toolholders for predictable cycle times and reduced set‑up complexity. Geometry and clamping ensure repeatable accuracy The rhombic CNMG shape with a nominal size of 16 and a wedge angle of 80° provides a robust biting edge and versatile approach angles for external and internal turning. The insert includes a cylindrical hole for positive clamping and a plate thickness of 6.35 mm, ensuring stiffness in the tool assembly. Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; correct matching of holder and insert supports repeatable results and reduces vibration during cutting. Application range and machining guidance This grade is the first choice for medium steel applications and performs well in both finishing and medium roughing when appropriate feeds and speeds are applied. The double‑sided chipbreaker geometry promotes controlled chip formation, improving surface finish and reducing the risk of chip entanglement. With a corner radius of 1.2 mm, the insert balances edge strength and surface integrity; larger radii improve tool life under heavier cuts, while smaller radii assist fine finishing. Productivity, economy and handling benefits Using a graded carbide insert like this reduces downtime through fewer indexings and longer intervals between replacements, supporting higher productivity on the shop floor. The indexable insert format reduces inventory complexity compared with brazed tools and simplifies tool change procedures. Choosing a CVD‑coated, carbide insert helps to lower overall cutting costs by extending usable life and maintaining consistent tolerances across production batches. Contact Metav Werkzeuge today to discuss the Tungaloy CNMG160612 T9215 insert and receive tailored application advice or to place an order: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Manufacturer article number: 6772194 SKU: 6772194-Tungaloy Manufacturer SKU: TUN6772194 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core data ISO designation: CNMG160612 Insert size: 16 Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Wedge angle: 80° Hole: with cylindrical hole Special features Material: carbide Coating/grade: T9215 (CVD-coated carbide) Plate shape: rhombic Chipbreaker: double-sided Typical application: turning (external and internal) Suited for: medium steel machining Recommended for: continuous to light interrupted cuts System composition: ISO insert, matching external holder or boring bar, backing/clamping set and replacement screws Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The CNMG160612 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning of steels. How does the chipbreaker affect machining? The double‑sided chipbreaker on this Tungaloy insert promotes controlled chip formation, improving surface finish and reducing the risk of chip control issues during turning. What dimensions and geometry are important when matching a holder? Match the holder to the insert’s form, clearance angle (0°), tolerance class, clamping method, size (CNMG 16) and thickness (6.35 mm) to ensure correct seating and stability. Is this insert suitable for interrupted cuts? Yes, the CVD‑coated carbide grade T9215 is designed for continuous to light interrupted cuts and provides a good balance between fracture resistance and wear life. How is the corner radius specified and what does it mean for cutting? The insert has a corner radius of 1.2 mm, which offers a compromise between edge strength and surface finish; it supports moderate cutting depths with improved tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a 1.2 mm corner radius for robust, long-running turning operations; the rhombic ISO geometry ensures stable clamping and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for process recommendations. CNMG 160612 T9215 Turning Insert – Tungaloy CNMG160612 T9215 is a rhombic, ISO-standard turning insert designed for medium-steel machining in general turning applications CVD-coated grade T9215 for steel machining Rhombic CNMG shape, 80° cutting angle 1.2 mm corner radius for strong edge Cylindrical-hole insert for secure clamping High productivity through wear-resistant CVD-coated carbide The CVD coating on the carbide grade T9215 combines high wear resistance with mechanical strength, which results in extended tool life and fewer indexings. For medium-steel turning, this balance reduces downtime for insert changes and supports higher metal removal rates without sacrificing process stability. The result is a measurable improvement in shop throughput and reduced total cost per part when compared with uncoated grades. Stable geometry and secure clamping for consistent surface finish Built to the ISO CNMG geometry with an 80° approach angle and a rhombic form, the insert features a cylindrical mounting hole and a plate thickness of 6.35 mm, which together provide reliable seat contact and repeatable positioning in the holder. The defined 1.2 mm corner radius enhances edge strength and helps avoid premature chipping under moderate interruptions. This combination improves vibration resistance and contributes to consistently better surface quality on shafts and bores. Application guidance and process benefits for turning operations The two-sided chipbreaker configuration and the grade’s suitability for continuous to slightly interrupted cuts make this insert a pragmatic choice for production turning and batch work. Selecting a matching holder and the correct tolerance class ensures optimal heat evacuation and chip flow. For stability-sensitive operations, pairing the insert with a robust external holder minimises runout and maximises the advantage of the grade’s breakage resistance and productivity. Contact Metav Werkzeuge for tailored advice on cutting parameters and to arrange supply of the Tungaloy CNMG160612 T9215 insert; eMail: info@metav-werkzeuge.com – Phone: +49 2822 7131930 Technical data Article number: 6774103 SKU: 6774103-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Name: CNMG160612 Facts Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 80° Relief angle: 0° Mounting: with hole (cylindrical) Special features Rhombic CNMG geometry Double-sided chipbreaker Compatible with ISO-standard turning holders Designed for medium-steel machining Suitable for continuous to slightly interrupted cuts Stable edge for high productivity and wear resistance FAQ What materials is this insert intended for? The CNMG160612 T9215 insert is optimised for medium-steel machining and delivers a good compromise between wear resistance and breakage safety for production turning. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide provides enhanced wear resistance and mechanical durability, resulting in longer tool life and fewer indexings compared with uncoated alternatives. Is the insert compatible with standard CNMG holders? Yes, the ISO CNMG form and the cylindrical mounting hole ensure compatibility with CNMG holders that match the required form, relief angle and tolerance class. What cutting conditions suit this insert best? The grade performs well under continuous to slightly interrupted cuts; choose a matching chipbreaker and moderate feeds to exploit the insert’s productivity and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Take advantage of the high toughness and versatile performance of this ISO insert; the CVD-coated carbide grade T9225 and the 1.2 mm corner radius combine to deliver stable chip control and extended life in medium-to-heavy steel turning. Order genuine inserts via Metav Werkzeuge or consult the technical team for holder compatibility and process parameters. CNMG 160612 T9225 – Indexable turning insert (CVD carbide, 1.2 mm radius) · Tungaloy CNMG 160612 T9225 is an ISO-standard indexable insert for robust outside and inside turning in steel, engineered for interrupted cuts and varying engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for steel turning Double-sided design with cylindrical hole 1.2 mm corner radius, 80° rhombic geometry Consistent metal removal with reliable chip control The CVD-coated carbide composition of the CNMG160612 T9225 provides a balance of wear resistance and toughness that suits medium-to-heavy turning of steel. The grade is designed for slightly interrupted cuts and changing engagement conditions, so the result is stable chip formation and reduced tendency to notch wear. The 1.2 mm corner radius offers increased edge strength for longer edge life while maintaining acceptable surface finishes; this reduces the frequency of insert changes and supports a more continuous production flow. Easy integration with ISO tooling to reduce setup time As an ISO-standard indexable insert, the rhombic 80° geometry and dimensions match a wide range of standard holders. Compatibility with a holder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness, so selection is straightforward when those parameters are checked. The insert’s cylindrical hole and double-sided layout simplify clamping and inventory management; spareing the need for customised tooling reduces setup complexity and shortens downtime between jobs. Process reliability and predictable tool life for production The T9225 grade is a robust universal solution that delivers predictable tool life across varied steel grades and cutting conditions. The CVD coating improves resistance to abrasive wear and helps maintain a stable cutting edge under heavier loads, supporting consistent part quality and reduced scrap. Economically, fewer index changes and extended edge life translate into lower tooling cost per component and higher machine utilisation, reinforcing steady throughput in serial turning operations. Contact Metav Werkzeuge for application advice and to secure original Tungaloy CNMG 160612 T9225 inserts and compatible holders with rapid delivery Technical data Article number: 6781232 Manufacturer SKU: TUN6781232 Brand: Tungaloy Numbers / Core data Corner radius: 1.2 mm Thickness: 6.35 mm Size: 16 mm Included angle: 80° Clearance angle: 0° Designs / Special features CVD-coated carbide Double-sided chipbreaker Rhombic 80° geometry Cylindrical hole for clamping ISO turning insert series Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CNMG160612 T9225 insert is specified for steel machining and is formulated as a robust universal grade for medium-to-heavy turning operations. Can this insert handle interrupted cuts? Yes, the T9225 grade and the 1.2 mm corner radius are designed to tolerate slightly interrupted cuts and changing engagement conditions in turning. How does the insert mount to a holder? The insert uses a cylindrical hole and standard ISO dimensions; secure clamping depends on matching holder form, tolerance class, fastening method, size and thickness. Is this an indexable double-sided insert? Yes, the insert is double-sided with a chipbreaker on both faces to increase usable edge life and economic efficiency. Where can genuine inserts be obtained and who to contact for technical questions? Genuine Tungaloy CNMG160612 T9225 inserts are available through Metav Werkzeuge; for technical queries Metav Werkzeuge can advise on holder compatibility and cutting data Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and a robust rhomboid geometry for reliable medium-to-heavy steel turning and improved resistance to interrupted cuts; the ISO compatibility ensures consistent setup across holders. Order the insert directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. CNMG 160612 T9225 turning insert – CVD-coated carbide, 80° CNMG160612 T9225 Tungaloy insert is an ISO-standard rhomboid indexable turning insert engineered for medium-to-heavy steel machining, offering enhanced toughness for variable engagement and lightly interrupted cuts. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning Rhomboid shape with 80° approach angle Double-sided insert with cylindrical hole Improve process stability with a tougher grade The T9225 grade is a CVD-coated carbide formulation designed for demanding turning tasks where toughness matters. In practice this means a greater resistance to edge chipping during variable engagement or light interruptions, which directly translates into longer effective tool life and fewer unscheduled insert changes. The coating supports thermal resistance at elevated cutting temperatures typical for steel turning, while the substrate provides the ductility needed to withstand mechanical shocks. Together, these properties help maintain consistent component dimensions and reduce scrap rates in production runs. Consistent set-up and predictable compatibility for efficient workflow As an ISO-specified insert, compatibility with the clamping system is governed by form, relief angle, tolerance class, fixing method, size and thickness. This standardisation simplifies tool inventory management and ensures quick replacement in the toolholder without adjustments. The system approach—insert, suitable holder or boring bar, seat/pad and clamping screw—offers repeatable positioning and predictable cutting behaviour. Reduced setup time and consistent positional tolerance support higher uptime and make process planning and tool path validation more straightforward for workshop engineers. Geometry and chip control that support finish and productivity The rhomboid plate geometry with an 80° approach angle combines strength and access to external and internal turning operations. The double-sided chipbreaker promotes controlled chip formation across a range of feeds, assisting in swarf evacuation and protecting the cutting edge. A corner radius of 1.2 mm balances edge strength and achievable surface finish: larger radii distribute cutting forces and improve life, while still allowing fine surface quality when cutting parameters are matched. The cylindrical hole enables secure fastening and exact seating, contributing to process stability and repeatable component quality. For machining tasks that prioritise toughness and consistent performance, contact Metav Werkzeuge to source the Tungaloy CNMG160612 T9225 insert and schedule application advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 6780753 Manufacturer SKU: TUN6780753 SKU: 6780753-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG160612 T9225 Tungaloy insert Core specifications Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Approach angle: 80° Hole: cylindrical Materials & features Material: carbide Grade/coating: T9225, CVD-coated carbide Shape: rhomboid Chipbreaker: double-sided Mounting: with hole (cylindrical) Typical application: turning (external and internal) System components: ISO insert, holder/boring bar, seat/pad, clamping screw FAQ What materials is this insert suited for? The CNMG160612 T9225 insert is optimised for steel machining in medium to heavy turning operations and is particularly suitable when toughness is required for interrupted cuts. How does the T9225 grade differ from more wear-focused grades? T9225 emphasises toughness and robust edge integrity; unlike purely wear-resistant grades, it performs better under variable engagement and light interruptions, lowering the risk of edge chipping. Is the insert compatible with standard ISO toolholders? Yes, the CNMG160612 conforms to ISO geometries; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness to ensure correct seating in the holder. What advantage does the 80° approach angle provide? An 80° approach angle reduces radial cutting forces compared with a 90° face, improving stability on overhangs and allowing flexible use for external and internal turning tasks. Can the insert be turned over to use the second cutting edge? This is a double-sided indexable insert; rotating or flipping the plate allows access to additional edges, extending usable life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, universally applicable turning solution: the combination of a CVD‑coated carbide grade and an 80° rhombic geometry delivers consistent cutting performance and extended edge life for medium to heavy steel turning; order through Metav Werkzeuge or consult our specialists for process‑specific setup assistance. CNMG 160612 T9225 — ISO rhombic turning insert (Tungaloy) The CNMG160612 T9225 is an ISO‑standard rhombic turning insert designed for medium to heavy steel turning, offering a robust universal grade and a double‑sided chipbreaker for versatile machining. ISO rhombic geometry for robust turning CVD‑coated carbide grade T9225 80° angle with 1.2 mm corner radius Double‑sided chipbreaker; cylindrical hole Consistent productivity with a universal carbide grade The combination of a CVD‑coated carbide substrate and the T9225 grade is engineered for dependable performance in mixed and slightly interrupted cuts encountered in daily turning operations. This insert provides a balance between hardness and toughness, which reduces the frequency of edge failures and minimises downtime. The wear‑resistant coating protects the cutting edge under higher temperatures and improves consistent edge life, making the solution economically attractive for batch production as well as longer single‑piece runs. Geometry and design that simplify set‑up and increase uptime An 80° rhombic geometry with a 1.2 mm corner radius and a plate thickness of 6.35 mm offers stability at the cutting zone and predictable engagement with the workpiece. The double‑sided construction and the cylindrical centre hole allow reversible indexing and secure clamping in ISO‑compatible holders; compatibility depends on the holder’s form, clearance angle, tolerance class, clamping method, size and thickness. This design reduces tooling costs per cutting edge and supports rapid changeover, which helps maintain production flow and reduces non‑productive time. Coating and chip control for better surface finish and process security The CVD coating provides high resistance to abrasive wear and promotes stable chip formation, which in turn supports consistent surface quality on steel components. The integrated, double‑sided chipbreaker is suited to a wide range of cutting conditions; selecting the correct chipbreaker and match of insert sort to the workpiece material enhances process security and reduces the risk of built‑up edge. For general turning applications, this insert offers a straightforward route to improved reproducibility and fewer machine interventions. For tailored recommendations on the Tungaloy CNMG160612 T9225 insert and to ensure optimal holder compatibility and cutting parameters, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical consultation. Technical data Article number: 6780759 SKU: 6780759-Tungaloy Manufacturer SKU: TUN6780759 Facts Inscribed circle / size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Lead / included angle: 80° Clearance angle: 0° Special features CVD‑coated carbide Grade: T9225 (robust universal grade) Rhombic plate form (CNMG) Cylindrical centre hole Double‑sided chipbreaker ISO turning insert series Intended application: turning FAQ What materials is this insert suitable for? The CNMG160612 T9225 insert is formulated for medium to heavy steel turning; the T9225 grade provides toughness for slightly interrupted cuts and variable engagement conditions. Is the insert reversible and how does that affect cost per edge? Yes — the insert is double‑sided, enabling indexing of unused edges and reducing cost per cutting edge by extending the usable life of each insert. Which holders are compatible with this insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, clamping method, size and thickness; the insert follows ISO dimensions for CNMG‑type turning inserts. How does the CVD coating benefit machining performance? The CVD coating increases wear resistance at elevated temperatures, promotes stable chip formation and contributes to improved edge life and consistent surface finish in steel machining. Can this insert handle interrupted cuts or variable conditions? Yes — the T9225 grade is a robust universal choice designed to tolerate slightly interrupted cuts and changing engagement, offering a compromise between hardness and toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T9225 grade and the CNMG160612 ISO geometry delivers robust performance for mid-to-heavy steel turning; the 1.2 mm corner radius adds edge strength for interrupted cuts. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants to ensure holder compatibility and optimal cycle time. CNMG160612 T9225 indexable insert for turning – Tungaloy The CNMG160612 T9225 Tungaloy insert is an ISO-standard, rhombic indexable insert designed for external and internal turning applications, offering a robust universal grade for varying engagement conditions. CVD-coated carbide T9225 universal grade Rhombic CNMG geometry with cylindrical hole 1.2 mm corner radius for tougher cuts Double-sided insert for cost-effective edge use Engineered for sustained productivity in steel turning The combination of a CVD-coated carbide substrate and the T9225 grade provides a high degree of wear resistance while retaining enough toughness for interrupted or variable cuts. This balance reduces unexpected tool changes and helps maintain consistent cycle times on medium-to-heavy machining operations. The substrate and coating pairing is intended to slow flank wear and protect the cutting edge under fluctuating loads, which translates into longer usable edge life and predictable replacement intervals. Geometry and clamping that contribute to reliable results The ISO CNMG 160612 geometry presents a rhombic shape with an 80° included angle and a 0° clearance on the insert face, offering versatile engagement for both external and internal turning. The 1.2 mm corner radius increases edge strength and reliably withstands light interruptions, while the cylindrical hole and standard thickness of 6.35 mm ensure secure clamping in compatible holders. The double-sided nature and chipbreaker design make the insert economical per cutting edge and suitable where consistent chip control is required. Practical guidance for selection and application Designed as a universal solution, this indexable insert is suitable for a broad range of steel machining tasks; select the double-sided chipbreaker and the T9225 grade when a combination of toughness and wear resistance is needed. Match holder form, clearance angle, tolerance class and clamping method to the insert dimensions to ensure correct seating and repeatable accuracy. For operations with variable stability or intermittent cuts, the tougher grade and larger corner radius deliver greater process security and fewer interruptions to production. If further compatibility checks are required, technical data and holder recommendations can be provided. Contact Metav Werkzeuge for tailored compatibility checks and ordering advice on the Tungaloy CNMG160612 T9225 insert Technical Data Article number: 6780967 Manufacturer SKU: TUN6780967 Model series: ISO turning indexable inserts SKU: 6780967-Tungaloy Material: carbide Grade: T9225 Coating: CVD-coated Designation: CNMG160612 Application: turning Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Inscribed circle / size: 16 mm Included angle: 80° Clearance angle: 0° Special features Rhombic plate form Cylindrical hole Double-sided chipbreaker ISO-standard geometry Suitable for external and internal turning Robust universal grade for mid-to-heavy steel machining FAQ What materials is this insert best suited for? The Tungaloy CNMG160612 T9225 insert is formulated as a universal grade for steel machining, particularly mid-to-heavy applications where toughness and wear resistance are required. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and resistance to breakage, making the insert better suited for interrupted cuts and operations with variable engagement. Is the insert reversible and cost-effective per edge? Yes, the insert is double-sided, providing two usable cutting edges per side and improving cost efficiency per cutting edge. What does the CNMG160612 designation indicate? The CNMG160612 designation specifies the rhombic plate form, size (16 mm inscribed circle), thickness (6.35 mm) and ISO chipbreaker/geometry standard for turning applications. How should holders be matched to this insert? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; confirm holder specifications against the CNMG160612 dimensions to ensure secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 and the CNMG 80° rhombic geometry for reliable turning under interrupted or unstable cutting conditions; the robust 1.2 mm corner radius and double-sided chipbreaker support consistent chip control and longer tool life. Order the CNMG160612 T9235 directly via Metav Werkzeuge or contact the consultants for holder selection and process advice. CNMG160612 T9235 — Indexable turning insert, ISO-standard, for turning (Tungaloy) CNMG160612 T9235 is an ISO-standard indexable turning insert developed for external and internal turning where interrupted cuts or unstable conditions occur; the geometry and grade are optimised for steel applications. CVD-coated carbide grade T9235 For steel, low cutting speeds and interrupted cuts Rhombic CNMG 80° geometry, 1.2 mm corner radius Double-sided chipbreaker, cylindrical hole design Reliable cutting performance where stability is limited The CNMG160612 T9235 insert combines a CVD-coated surface with a tough carbide substrate to withstand impacts and fluctuating cutting forces. This ISO-standard insert is engineered for turning operations that require secure edge behaviour in stop-and-go or interrupted machining. The combination of coating and substrate reduces flank wear and helps maintain dimensional accuracy in serial and job-shop production, offering a tangible productivity advantage when feeds and speeds cannot be fully stabilised. Clear compatibility criteria and practical clamping guidance Compatibility with toolholders depends on form, clearance, tolerance class, fastening method, size and thickness; the rhombic plate format and the presence of a cylindrical hole simplify positive location in many standard CNMG holders. The insert features a 0° clearance setting and an 80° included angle, which should be matched to a holder that accepts ISO CNMG plates and secures them to prevent movement under interrupted loads. Choosing a holder with the correct seating and screw configuration ensures repeatable clamping and reduces the risk of edge chipping. Better chip control and economical cutting cycles The double-sided chipbreaker provides controlled chip formation on both indexable faces, improving evacuation in turning operations and reducing rework. With a 1.2 mm corner radius, the insert balances edge strength and surface finish, enabling more robust passes without sacrificing workpiece quality. These attributes translate into longer edge life and fewer index changes, supporting a more efficient production flow and lower tool handling times. Material focus and recommended cutting strategies This grade is specified as T9235, a CVD-coated carbide designed for steel machining at moderate to lower cutting speeds and in conditions where cuts are frequently interrupted. For roughing under unstable setups, select conservative speeds and feeds to exploit the insert's toughness; for finishing, optimise feed for the required surface quality while retaining the insert’s edge integrity. For specific holder pairings or cutting-parameter recommendations, Metav Werkzeuge can advise on matching carriers and insert orientations to achieve consistent results. For technical queries, the team is available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge to discuss the ideal holder pairing and order the Tungaloy CNMG160612 T9235 insert for stable, productive turning operations. Technical Data Article number: 6785858 Manufacturer article number: 6785858 Manufacturer SKU: TUN6785858 SKU: 6785858-Tungaloy Model series: ISO-turning indexable inserts Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Special features CVD-coated carbide grade T9235 Rhombic CNMG plate form Double-sided chipbreaker Cylindrical hole (with hole) ISO-standard turning insert suitable for external and internal turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The CNMG160612 T9235 insert is specified for machining steel; the T9235 grade is formulated to perform under lower cutting speeds and interrupted conditions common in steel turning. How is compatibility with toolholders ensured? Compatibility is determined by plate form, clearance angle, tolerance class, fastening, size and thickness; the CNMG geometry and cylindrical hole accommodate standard CNMG holders when the holder accepts ISO CNMG plates. What chip control features are provided? The double-sided chipbreaker on the CNMG160612 T9235 supports controlled chip formation on both faces, improving evacuation and reducing risk of re-cutting in turning operations. What is the corner radius and what does it mean for machining? The insert has a 1.2 mm corner radius, which offers greater edge strength for roughing and interrupted cuts while still enabling acceptable surface quality for many finishing passes. Does this insert have a hole, and what type is it? Yes, the insert is supplied with a cylindrical hole for positive location and secure clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide and a 1.2 mm corner radius for reliable performance in unstable or interrupted steel turning operations; order the insert directly via Metav Werkzeuge or request tailored cutting data from our consultants. CNMG 160612 T9235 turning insert — CVD-coated carbide, double-sided chipbreaker | Tungaloy The CNMG160612 T9235 is an ISO-standard turning insert engineered for both external and internal turning, offering a tough, CVD-coated carbide grade for interrupted cuts and unstable machining conditions. ISO-standard CNMG geometry CVD-coated carbide grade T9235 Tough grade for unstable and interrupted cuts Double-sided chipbreaker with cylindrical hole Proven toughness for interrupted and unstable turning The indexable insert combines a CVD-coated surface with a tough carbide substrate to provide controlled wear under demanding conditions. This composition makes the insert especially suited to machining steel where cutting speeds are moderate and the cut is interrupted or unstable. The T9235 grade is formulated to resist chipping and maintain cutting edge integrity, which translates into steadier component quality and reduced tool-change frequency. The combination of coating and substrate also supports predictable tool-life behaviour, aiding process planning in production environments. Precise geometry for dependable clamping and repeatability Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness, all conforming to ISO standards. With an inscribed size of 16 mm, a thickness of 6.35 mm and a corner radius of 1.2 mm, the insert provides consistent seating and repeatable positioning in commercial CNMG-compatible holders. The 0° clearance angle and 80° included angle help define the effective engagement and cutting forces, so correct holder selection and secure clamping yield stable cutting conditions and reproducible surface finish without guesswork. Chip control and edge utilisation to boost productivity The double-sided chipbreaker design, combined with a cylindrical hole for positive location, supports controlled chip formation and evacuation even under irregular cut interruptions. Good chip control reduces rework and risk of built-up edge, improving cycle reliability on both external and internal features. The rhombic insert form and indexable nature enable multiple edge uses per insert, lowering per-part tooling cost and simplifying inventory management in the workshop. Practical selection and application guidance For best results, pair the insert with a matching external holder or boring bar, and choose the chipbreaker style and grade according to workpiece material, machining method and machine stability. The ISO-series system architecture—insert, holder, shim/clamp set and replacement screws—ensures each component is specified for a coherent setup. In marginally stable setups the T9235 grade is recommended at reduced cutting speeds to preserve edge life; in steady, high-speed scenarios a different grade may be preferable to increase metal removal rate. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on the Tungaloy CNMG160612 T9235 turning insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785822 Manufacturer SKU: TUN6785822 SKU: 6785822-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Shape: rhombic Core figures Inscribed size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 80° Materials & special features Material: carbide Grade: T9235 (CVD-coated) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Series designation: CNMG160612 FAQ What makes this insert suitable for interrupted cuts? The CVD-coated T9235 grade and tough carbide substrate provide resistance to chipping and edge fracture, making the CNMG160612 T9235 insert appropriate for interrupted and unstable cutting conditions. Which holders are compatible with this CNMG geometry? Compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness; when these parameters align, standard CNMG holders and boring bars accept the CNMG160612 insert. What are the key dimensions to check before ordering? Check the inscribed size (16 mm), thickness (6.35 mm) and corner radius (1.2 mm); these determine seating, corner engagement and the achievable contour radius in turning operations. Does the double-sided chipbreaker improve chip control? Yes, the double-sided chipbreaker combined with the cylindrical locating hole encourages stable chip formation and evacuation, supporting cleaner cuts and less risk of built-up edge. Is this insert suitable for stainless or special alloys? The CNMG160612 T9235 insert is a tough grade optimised for steel and interrupted cuts; for stainless steel or advanced alloys, consult application data to confirm the ideal grade and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a robust cutting edge and double-sided geometry for consistent turning under unstable conditions. Order the CNMG160612 T9235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 160612 T9235 turning indexable insert — CVD-coated carbide, double-sided, Tungaloy CNMG160612 T9235 is a rhombic ISO-indexable insert designed for general turning applications where toughness and reliable chip control are required CVD-coated carbide T9235 for toughness Double-sided geometry for economical indexing ISO rhombic CNMG form for holder compatibility Cylindrical hole and 1.2 mm corner radius Reliable cutting performance for interrupted and unstable turning The CNMG160612 T9235 insert delivers consistent cutting performance thanks to its CVD-coated carbide substrate and a geometry tuned for interrupted cuts. The double-sided construction provides two usable edges per seat, reducing downtime and improving cost efficiency in batch production. The grade T9235 is formulated to remain tough at lower cutting speeds and in less stable setups, which helps to preserve the cutting edge where chatter or interruptions occur. The rhombic CNMG form and standard 80° lead angle ensure predictable engagement with the workpiece and familiar behaviour in most ISO holders. Easier setup and predictable chip control in everyday turning Compatibility with the toolholder is defined by form, relief angle, tolerance class, fixing method, size and thickness; this insert matches common CNMG holders thanks to its ISO geometry and cylindrical hole. The double-sided chipbreaker supports repeatable chip control, lowering the risk of built-up edge and facilitating smoother material evacuation. For applications in Stahl, choose feed and speeds that reflect the tougher T9235 behaviour — optimised for lower cutting speeds. If additional machining data or holder recommendations are required, technical advice is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Durable grade and economic advantages for standard turning tasks Manufactured from high-quality carbide and finished with a robust CVD layer, the insert offers a balance of edge strength and wear resistance that supports longer tool life under demanding turning conditions. The 1.2 mm corner radius helps distribute cutting forces, improving edge stability and surface finish in roughing and finishing passes. By combining replaceable insert economics with a proven ISO form, the solution reduces overall tooling expenditure and simplifies inventory management. Trust in the engineered consistency of the grade for repeatable results on production runs. Choose the Tungaloy CVD-coated CNMG160612 insert for demanding turning operations and contact Metav Werkzeuge for ordering and bespoke technical guidance Technical data Article number: 6785813 SKU: 6785813-Tungaloy Manufacturer SKU: TUN6785813 Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Lead/approach angle: 80° Relief angle: 0° Special features Material: carbide Coating/grade: T9235 (CVD-coated) Shape: rhombic (CNMG) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning ISO designation: CNMG160612 Suitable for: Stahl; optimised for unstable or interrupted cuts FAQ What materials is this insert designed to machine? The CNMG160612 T9235 insert is optimised for machining Stahl, offering toughness and edge stability for interrupted or less stable turning operations. Is the insert reversible and economical? Yes, the double-sided CNMG geometry provides two usable edges per seat, enabling economical index changes and reduced tool change frequency with the CNMG160612 T9235. How does the T9235 grade behave in practical cutting? T9235 is a CVD-coated, tough carbide grade formulated to perform well at lower cutting speeds and under interrupted cutting conditions, prioritising edge resilience over maximum speed. Which holder features must be matched for correct fitment? Compatibility is determined by the ISO form, relief (frewinkel) angle, tolerance class, fixing method, size and thickness; use a standard CNMG-compatible holder to ensure correct clamping and alignment. Does the insert include special chip control features? The double-sided chipbreaker is designed for predictable chip formation and evacuation, improving surface finish and reducing built-up edge during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 160612 T9235 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD‑coated carbide grade T9235, a CNMG 80° rhombic geometry and a double‑sided chipbreaker for reliable external and internal turning of steel under unstable or interrupted‑cut conditions; order or request application advice via Metav Werkzeuge. CNMG160612 T9235 turning insert — CVD‑coated carbide, 80° rhombic | Tungaloy The CNMG160612 T9235 is an ISO rhombic turning insert designed for external and internal turning of steel, offering a tough, CVD‑coated carbide grade for interrupted cuts and less stable machining conditions. CVD‑coated carbide grade T9235 Rhombic 80° geometry for versatile turning Double‑sided chipbreaker for consistent chips 1.2 mm nose radius for balance of strength and finish Consistent performance with a tough CVD coating The combination of a CVD‑coating and a tough carbide substrate (grade T9235) delivers improved wear resistance and thermal stability compared with uncoated grades. In practice this means extended tool life and more predictable change intervals when machining steel at lower cutting speeds or with interrupted cuts. CVD coatings form a hard, thin layer that reduces flank wear and provides a thermal barrier; the result is a more stable process and fewer unplanned tool changes, which supports continuous production and cost efficiency. Geometry engineered for stability and surface quality The insert’s 80° included angle and rhombic shape make it suitable for a wide range of turning profiles, while the 1.2 mm nose radius balances cutting edge strength and surface finish. The double‑sided chipbreaker supplies repeatable chip control for many roughing and finishing passes, and the cylindrical hole allows secure screw clamping in compatible ISO toolholders. A 0° clearance specification increases edge strength where robustness is required rather than aggressive tool relief, so the component performs well in interrupted cuts and when machine stability is limited. ISO compatibility and system considerations for predictable results As an ISO‑standardised insert, compatibility with the toolholder depends on form, clearance angle, tolerance class, mounting method, size and thickness. The insert integrates into standard systems comprising an appropriate external holder or boring bar, a support/locking set and spare screws. Selecting the correct holder and clamping set is decisive for process reliability: a matching toolholder ensures correct seating, repeatable clamping and optimal heat dissipation, all of which contribute to more consistent surface quality and longer edge life. Practical selection and application advice for turning steel Choose the chipbreaker and grade to match the workpiece material, machining stability and type of cut; the T9235 grade is intended for steel applications at lower cutting speeds and for interrupted or unstable cutting situations. Properly paired with a suitable holder and clamping, the insert provides improved chip control and steadier cutting forces, reducing the risk of edge chipping and downtime. For specific machining strategies or to clarify holder compatibility, technical consultation is available to help define the best combination for a given component and machine setup. Contact Metav Werkzeuge for application recommendations or to check availability of the CNMG160612 T9235 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785869 Manufacturer SKU: TUN6785869 Our SKU: 6785869-Tungaloy Model series: ISO turning inserts Designation: CNMG160612 Manufacturer article number: 6785869 Core specifications Nose radius: 1.2 mm Insert size: 16 mm Thickness: 6.35 mm Included angle: 80° Clearance angle: 0° Features & suitability Material: carbide Coating/sort: CVD‑coated, grade T9235 Shape: rhombic (CNMG) Chipbreaker: double‑sided Hole: cylindrical hole, with hole Typical application: external and internal turning Suited to steel, interrupted cuts and unstable conditions FAQ What materials is this insert suitable for? The CNMG160612 T9235 insert is specified for machining steel and is particularly suited to interrupted cuts and less stable machining conditions thanks to its tough CVD‑coated carbide grade. How does the 1.2 mm nose radius affect machining results? A 1.2 mm nose radius provides a compromise between edge strength and surface finish; larger radii increase strength and allow heavier cuts, while smaller radii improve the ability to produce finer surface finishes. Is the insert reversible or indexable? The insert is double‑sided, offering two effective cutting edges per index position; this maximises usable edges before replacement and supports economical usage. What should be considered for clamping and holder selection? Compatibility depends on form, clearance angle, tolerance class, mounting method, size and thickness; correct seating and screw clamping in a suitable ISO toolholder are essential for repeatable performance. Can this insert be used for internal turning (boring)? Yes — the rhombic geometry and the CNMG form allow use in both external and internal turning operations, provided a compatible holder or boring bar is used and appropriate cutting parameters are selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 160612 WM 4315 Indexable Insert - Sandvik
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Performance features for indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WM4315-SANDVIK Facts for the tool: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-160612-4315-Sandvik 40END
CNMG 160612 WM 4415 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing directly by post. Features indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WM4415-SANDVIK Figures for the tool: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Features Material: cemented carbide Grade: 4415 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-160612-4415-Sandvik 40END
CNMG 160612 WM 4425 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WM4425-SANDVIK Facts for the tool: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Features Material: cemented carbide Grade: 4425 Chip Breaker: WM with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CNMG-160612-4425-Sandvik 40END
CNMG 160612 WMX 2015 Indexable Insert - Sandvik
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product features for indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WMX2015-SANDVIK Figures for the tool: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Special features Material: cemented carbide Grade: 2015 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CNMG-160612-2015-Sandvik 40END
CNMG 160612 WMX 3210 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WMX3210-SANDVIK ISO-Code: CNMG160612 Grade: 3210 Material: cemented carbide Form: rhombic Clearance Angle: 0° with hole Hole Style: cylindrical hole Thickness: 6,35mm Radius: 1.2 Chip Breaker: WMX Chip Breaker: double-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-160612-3210-Sandvik 40END
CNMG 160612 WMX 3225 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WMX3225-SANDVIK Facts and Figures: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Features Material: cemented carbide Grade: 3225 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-160612-3225-Sandvik 40END
CNMG 160612 WMX 4305 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features indexable inserts CNMG 160612 from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WMX4305-SANDVIK Facts & Figures: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Special features Material: cemented carbide Grade: 4305 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-160612-4305-Sandvik 40END
CNMG 160612 WMX 4315 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Specifications CNMG 160612 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CNMG160612WMX4315-SANDVIK Facts for the tool: ISO-Code: CNMG160612 Clearance Angle: 0° Thickness: 6,35mm Radius: 1.2 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WMX with hole Hole Style: cylindrical hole Form: rhombic Chip Breaker: double-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CNMG-160612-4315-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com