Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ANMT 09T3PP AH120 Wendeplatten - Tungaloy
Take advantage of the durable PVD-coated AH120 carbide and the precise parallelogram geometry for stable milling with reduced downtime; order directly via Metav Werkzeuge or consult our specialists for application-matched solutions. ANMT 09T3PP AH120 — Tungaloy indexable milling insert, PVD-coated carbide, parallelogram 09 The ANMT09T3PP AH120 is an indexable insert for milling operations, designed for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide AH120 for wear resistance Parallelogram form, 09 size, 85° lead angle Cylindrical hole with 40°–60° countersink Consistent cutting performance through wear-resistant coating The AH120 grade is a PVD-coated carbide developed for milling applications that demand both a sharp cutting edge and reliable chip control. The coating improves surface hardness and resistance to flank wear, which results in longer intervals between index changes and a steadier cutting process. For production environments, this translates into fewer interruptions, more predictable component quality and a better cost-in-use ratio compared with uncoated grades. The combination of substrate and coating supports both finishing passes and more aggressive engagements depending on the tool body used. Secure clamping and precise geometry for repeatability The insert’s parallelogram outline, nominal size 09 and 85° lead angle provide a stable seating and cutting orientation in compatible milling bodies. With a thickness of 3.97 mm, a zero corner radius and a 0° clearance angle, the geometry delivers a defined cutting edge ideal for true-to-form profiling and shoulder work. The feature set includes a cylindrical hole with a single-sided countersink (40°–60°) for positive clamping force and repeatable positioning. When the insert, seat, and cutter body are matched technically, the result is consistent runout behaviour and surface finish across repeated cycles. Flexible application range and controlled chip formation Designed for a variety of milling strategies — from face and shoulder milling to slotting, high-feed and contour operations — the plate features a single-sided chipbreaker that encourages predictable chip flow for one-sided cutting directions. The material and chipbreaker design reduce the risk of built-up edge and improve process stability in mixed production runs. Because the indexable system comprises the milling body, insert, clamping screw and, where required, a shim, it is important that all components are compatible; correctly matched assemblies exploit the insert’s strengths for efficient metal removal and repeatable finishes. Practical purchasing and in-process considerations The insert is supplied as part of Tungaloy’s milling system family and must be paired with a matching cutter body for correct function. The item is catalogued under manufacturer article number 6800918 and manufacturer SKU TUN6800918, enabling simple stock management and reorder processes. For shops aiming to reduce setup time, keeping a ready supply of AH120 inserts allows quick replacement during planned tool changes, improving machine uptime. Where special cutting parameters are required, technical support can advise on the optimal insert orientation, clamping torque and cutter family pairing to ensure the best life and surface quality. Contact Metav Werkzeuge for tailored application advice on the ANMT 09T3PP AH120 indexable milling insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable cutter bodies and procurement options Technical Data Article number: 6800918 Manufacturer SKU: TUN6800918 Our SKU: 6800918-Tungaloy Numbers / Core technical data Size: 09 Thickness: 3.97 mm Lead angle: 85° Corner radius: 0 mm Clearance angle: 0° Designs / Special features Material: carbide (cemented carbide) Coating / grade: PVD-coated AH120 Plate form: parallelogram Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Typical applications: face, shoulder, slot, high-feed and contour milling System components: milling body, indexable insert, clamping screw, possible shim FAQ What machining tasks is this insert best suited for? The ANMT09T3PP AH120 insert is suitable for face, shoulder, slot, high-feed and contour milling where a sharp, process-secure cutting edge is required. Is the AH120 grade suitable for heavy interrupted cuts? AH120 is a wear- and breakout-resistant PVD-coated carbide designed to maintain a sharp edge and good process security, which supports tougher milling conditions when paired with an appropriate cutter body. How must the insert be mounted to ensure correct function? The insert requires a compatible Tungaloy milling body with matching seat geometry; the system uses a clamping screw and may require a shim to ensure secure and repeatable clamping. What does the zero corner radius mean for finishing work? A corner radius of 0 mm provides a very sharp cutting edge for accurate profiling and tight-radius features, while the PVD coating helps manage wear during finishing passes. Where can the ANMT09T3PP AH120 be ordered or specified? This insert is listed under article number 6800918 and manufacturer SKU TUN6800918; ordering and technical discussion are available via Metav Werkzeuge and their technical advisors. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 09T3PP AH120 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade (AH120) and a parallelogram form with precise 85° geometry to secure consistent cutting performance in Tungaloy milling systems; order directly via Metav Werkzeuge or request advice from our consultants for selection and compatibility. ANMT 09T3PP AH120 — Tungaloy indexable milling insert (parallelogram, 3.97 mm, 85°) The ANMT09T3PP AH120 is an indexable milling insert designed for reliable milling operations within Tungaloy milling tool systems, suitable for face, shoulder, slot and high-feed milling. PVD-coated carbide for high wear resistance Designed for Tungaloy milling tool systems Parallelogram form, 3.97 mm thickness Cylindrical hole with single-side countersink Engineered for consistent machining performance The insert is manufactured from carbide and finished with a PVD coating, delivering a balance of wear resistance and edge integrity that is especially useful where a sharp cutting edge and process security are required. The AH120 grade is specified for applications prone to wear and chipping; this composition supports repeatable part quality and reduces unscheduled tool changes. The insert’s geometry—a parallelogram form with an 85° cutting angle—ensures stable engagement with the workpiece and predictable chip flow, which in turn can improve cycle-time consistency on both roughing and finishing passes. Secure seating and simple clamping for production stability Designed to work within matched Tungaloy milling bodies, the indexable insert relies on correct seat geometry and clamping to perform. The cylindrical hole with a single-side countersink (40°–60°) and the defined 3.97 mm plate thickness provide a secure mechanical location once clamped, so the cutting edge is presented consistently from one index to the next. This engineering reduces the risk of misalignment and supports stable cutting conditions, which is advantageous in batch production or mixed‑batch scenarios where reproducibility matters. Chip control and edge characteristics that aid surface finish The insert’s single-sided chipbreaker design promotes controlled chip formation across a range of milling tasks. When paired with the sharp edge characteristics of the AH120 grade, the result is an improved surface finish on the machined component and reduced tendency for edge breakout under intermittent cuts. For users less familiar with carbide grades, the practical benefit is straightforward: enhanced tool life under typical milling feeds and speeds and fewer machining interruptions due to edge failure. Practical fitment and workshop handling The insert is supplied in a standard ISO arrangement 09T3PP, with a nominal plate size of 09 and a corner radius of 0 for profiling where a small nose radius is desirable. The indexable design allows rapid indexing and replacement, which is helpful for workshop throughput. Given the necessity of matching plate seat, geometry and cutter body, it is recommended to verify compatibility with the intended Tungaloy milling body before integration into a toolset; correct mating will ensure the benefits of the insert are realised on the machine. For process-critical milling applications, choose the Tungaloy ANMT 09T3PP AH120 for durable, sharp-edge performance and contact Metav Werkzeuge for tailored selection support at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: 6800913 Manufacturer SKU: TUN6800913 Model series: Milling indexable inserts Facts Thickness: 3.97 mm Cutting angle: 85° Plate size: 09 Corner radius: 0 Relief angle: 0° ISO designation: 09T3PP Special features Material: Carbide Coating: PVD‑coated Grade: AH120 (wear- and chip-resistant) Plate form: Parallelogram Hole: Cylindrical hole + single-side countersink (40°–60°) Chipbreaker: Single-sided Typical applications: Face, shoulder, slot, high-feed and contour milling Compatibility: For use with Tungaloy milling systems (matching seat and geometry required) FAQ What milling operations are best suited to this insert? The ANMT09T3PP AH120 insert is intended for face, shoulder, slot, high‑feed and contour milling when paired with the appropriate Tungaloy milling body. Which materials can the AH120 grade handle effectively? The AH120 PVD‑coated carbide is formulated to offer wear and chip resistance across a broad range of materials typically encountered in milling; the insert is particularly beneficial where a sharp cutting edge and process reliability are priorities. How does the parallelogram form affect tool setup? The parallelogram plate form determines the insert seating and cutting orientation; correct matching of seat geometry in the milling body is required to ensure the ANMT09T3PP AH120 functions as intended. Is the insert suitable for interrupted cuts or unstable conditions? The AH120 grade’s resistance to chipping and the controlled chip formation from the single-sided chipbreaker make this indexable insert suitable for applications that include intermittent engagement, within the limits of recommended cutting data. What identification should be quoted when reordering? When reordering, reference the ANMT09T3PP AH120 Tungaloy indexable insert and article number 6800913 (Manufacturer SKU TUN6800913) to ensure the exact item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 09T3PP GH330 Wendeplatten - Tungaloy
ANMT 09T3PP GH330 – Wendeplatte zum Fräsen, Tungaloy Die ANMT09T3PP GH330 ist eine Hartmetall-Wendeschneidplatte von Tungaloy für universelles Fräsen in Frässystemen, geeignet für Plan-, Schulter-, Nut- und Konturfräsen. Parallelogramm-Form für stabile Schnittkräfte GH330-Sorte: Ausgewogenes Verhältnis von Zähigkeit und Verschleißfestigkeit Mit Loch und einseitiger Senkung (40°–60°) für sicheren Sitz Plattendicke 3,97 mm für präzise Stabilität Einseitiger Spanbrecher optimiert Spanbildung Produktivität steigern durch optimierte Schneidkantenstabilität Die Wendeschneidplatte überzeugt durch die GH330-Sortenwahl, die gezielt Zähigkeit und Verschleißfestigkeit kombiniert. Dadurch reduziert sich Werkzeugverschleiß bei wechselnden Schnittbedingungen und die Standzeit verlängert sich spürbar. Anwender profitieren von konstanteren Bearbeitungsergebnissen und weniger Rüstunterbrechungen, was die Produktionsrate erhöht und Ausschuss reduziert. Haltbarkeit und Materialauswahl für robuste Bearbeitung Gefertigt aus Hartmetall bietet die Platte dauerhafte Kantenstabilität bei anspruchsvollen Fräsaufgaben. Die Plattendicke von 3,97 mm und die Parallelogramm-Form garantieren mechanische Steifigkeit, die Vibrationen dämpft und die Oberflächengüte verbessert. Der einseitige Spanbrecher sorgt für definierte Spanabfuhr, erklärt und erleichtert den Umgang auch bei schwerspanenden Werkstoffen. Kompatibilität und Einbaubedingungen für Frässysteme Die ANMT-Ausführung verlangt passenden Plattensitz und korrespondierende Fräskörper; die Kombination aus Form, Lochbild und Senkung (zylindrisches Loch + einseitige Senkung 40°–60°) gewährleistet sicheren Sitz und präzise Montage. Mit einem Winkel von 85° eignet sich die Platte für Standard-Winkelgeometrien in modularen Frässystemen und erlaubt vielseitige Einsatzfälle vom Hochvorschub bis zur Konturbearbeitung. Zielgruppe, Anwendungshinweise und Nutzen Entwickelt für Fertiger und Lohnbearbeiter, die prozessstabile Fräsoperationen benötigen, bietet die Platte einfache Einsetzbarkeit in bestehenden Tungaloy-Frässystemen. Anwender erhalten eine wirtschaftliche Lösung für Serien- wie Einzelteilefertigung, die durch weniger Werkzeugwechsel und zuverlässig reproduzierbare Ergebnisse Kosten senkt und Stillstandszeiten minimiert. Empfehlung: Für produktives Plan‑ und Konturfräsen empfiehlt sich die Wahl der ANMT09T3PP GH330 von Tungaloy; bei technischen Fragen steht Metav Werkzeuge gern zur Verfügung, eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6800915 Marke: Tungaloy Serie: Fräswendeschneidplatten Hersteller SKU: TUN6800915 Daten Plattendicke: 3,97 mm Winkel: 85° Plattengröße: 09 Eckenradius: 0 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: GH330 Plattenform: Parallelogramm Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Schneidstofftyp: Tungaloy-Schneidstoffsorte FAQ Was bedeutet die Bezeichnung ANMT09T3PP GH330? Die Bezeichnung beschreibt Form und Größe: ANMT steht für die Plattengattung, 09 für die Plattengröße, T3 für die Plattendicke in der Nomenklatur und PP für die Geometrie; GH330 kennzeichnet die Tungaloy-Schneidstoffsorte, die Zähigkeit und Verschleißfestigkeit ausgleicht. Für welche Fräsanwendungen eignet sich die Wendeplatte am besten? Die Platte eignet sich besonders für Plan-, Schulter-, Nut‑ und Konturfräsen sowie Hochvorschuboperationen, abhängig vom eingesetzten Fräskörper und Systemaufbau. Ist die ANMT09T3PP GH330 kompatibel mit anderen Herstellersystemen? Die Platte ist für Tungaloy‑Frässysteme konzipiert; Plattensitz, Geometrie und Fräskörper müssen technisch übereinstimmen, um sicheren Sitz und korrekte Spanführung zu gewährleisten. Wie wirkt sich der einseitige Spanbrecher auf die Bearbeitung aus? Der einseitige Spanbrecher formt kontrollierte Späne, verbessert die Spanabfuhr und reduziert das Risiko von Aufbauschneiden bei schwerspanenden Werkstoffen. Welche Vorteile bietet die GH330‑Sorte im Produktionsalltag? GH330 bietet ein ausgewogenes Verhältnis aus Zähigkeit und Verschleißfestigkeit, was zu längeren Standzeiten, stabiler Spanbildung und gleichmäßigeren Bearbeitungsergebnissen führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ANMT 09T3PP T3130 Wendeplatten - Tungaloy
Reliable carbide indexable insert in Tungaloy T3130 grade combines wear resistance and edge stability with a parallelogram geometry and secure clamping; designed for productive milling operations and compatible with Tungaloy milling systems when seat, geometry and cutter body match. Order the insert directly via Metav Werkzeuge or consult the technical advisors for tool-family matching and availability. ANMT09T3PP T3130 ANMT 09T3PP T3130 Milling Insert by Tungaloy The ANMT09T3PP T3130 is a parallelogram-shaped carbide indexable insert for milling applications, intended for use in compatible Tungaloy milling systems. T3130 grade for balanced wear resistance Parallelogram form for versatile milling Cylindrical hole with 40°–60° countersink 85° cutting angle for robust engagement Consistent edge life that stabilises production The Tungaloy T3130 grade is formulated to balance wear resistance and toughness, giving stable performance across mixed milling duties. With a focus on controlled flank wear and durable cutting edges, the insert sustains repeatable component quality in series production. The use of carbide as the base material supports consistent tool life under varying cutting conditions, reducing the frequency of index changes and contributing to predictable machining cycles. System compatibility for reliable clamping and safe operation Successful integration requires that insert seat, geometry and milling body are technically matched; the system approach ensures correct seating and torque transmission. The cylindrical hole combined with a one-sided 40°–60° countersink secures the clamping screw and prevents lateral movement during engagement. When used in the appropriate tool family, the clamping interface provides repeatable positioning and stable cutting dynamics, which supports process reliability and reduces vibration-related wear. Geometry that supports efficient material removal The parallelogram shape and an 85° cutting angle offer robust engagement for a range of milling tasks, from face and shoulder work to contour and high-feed strategies where the cutter family allows. The insert thickness of 3.97 mm and size 09 provide a compact geometry that can be favourable for tight assemblies and multi-tooth cutter layouts. A zero corner radius promotes sharp geometries for slotting and finishing passes when required, while the specified relief angle maintains the intended cutting clearance. Versatile application range with productive chip control Designed for general milling, the insert suits face milling, shoulder milling, slot milling and contour milling, subject to the chosen cutter body and operating parameters. The single-sided chipbreaker geometry supports controlled chip formation and evacuation, improving surface consistency and machining throughput. The overall combination of grade, form and hole style enables broad material coverage and productive metal removal in diverse workshop and production environments. Contact Metav Werkzeuge to specify the ANMT09T3PP T3130 for the production setup, request technical matching to existing cutter bodies or check current stock and delivery options Technical data Article number: 6853807 Manufacturer item number: 6853807 SKU: 6853807-Tungaloy Manufacturer SKU: TUN6853807 Facts Thickness: 3.97 mm Size: 09 Cutting angle: 85° Corner radius: 0 mm Relief angle: 0° Special features Parallelogram shape Carbide material Grade: T3130 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Designed for milling; seat and geometry must match Tungaloy milling systems FAQ What is the primary application for this insert? The ANMT09T3PP T3130 is intended for milling operations within compatible Tungaloy milling systems, including face, shoulder, slot and contour milling depending on the cutter family. Which material spectrum is the T3130 grade suitable for? Tungaloy’s T3130 grade provides broad material coverage and a balance of wear resistance and toughness, making the insert suitable for a wide range of common machining tasks when paired with the correct cutting data. How is the insert secured in the milling body? The insert is clamped via a cylindrical hole with a one-sided countersink (40°–60°); correct seating and the matching clamping screw ensure secure fixation and consistent positioning for the ANMT09T3PP insert. What are the key dimensions for selection and setup? Key dimensions are size 09, thickness 3.97 mm, an 85° cutting angle and a corner radius of 0 mm; these values support selection of compatible cutter bodies and clamping hardware (see SKU 6853807-Tungaloy for reference). Is this an original Tungaloy product? Yes, the ANMT09T3PP T3130 is offered as an original Tungaloy indexable insert and is listed under SKU 6853807-Tungaloy for identification and ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH120 carbide and a parallelogram geometry with secure clamping, which delivers stable cutting performance and long tool life for demanding milling tasks. Order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. ANMT 1404PP AH120 – Tungaloy indexable milling insert for milling, PVD-coated carbide The ANMT1404PP AH120 is an indexable insert engineered for Tungaloy milling systems; it is designed for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are essential. PVD-coated carbide AH120 for wear resistance Parallelogram form with 85° cutting angle Cylindrical hole with single-sided countersink Consistent edge life through PVD-coated AH120 performance The AH120 grade is a PVD-coated cemented carbide engineered to combine wear resistance with a durable, sharp cutting edge. This composition reduces flank wear and chipping during interrupted cuts, which translates into longer service intervals and more consistent surface finishes. By prioritising such material characteristics, the insert supports predictable process windows and helps maintain throughput in serial milling operations without frequent index changes or rework. Geometry tuned for stability and versatile milling applications A parallelogram-shaped insert with an included angle of 85° and a single-sided chipbreaker offers both axial engagement control and chip formation suited to a variety of milling tasks. The chipbreaker directs chips reliably for face, shoulder, slot, high-feed and contour milling, while the 85° geometry improves clamp stability and allows positive engagement in different cutter bodies. Proper matching of insert seat, geometry and milling body maximises clamping security and repeatability across production batches. Practical dimensions and system compatibility for fast setup The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) to ensure secure fastening with the appropriate clamping screw and support pad. Key dimensions include a plate size of 14 mm and a plate thickness of 4.76 mm, with a corner radius of 0 mm and a free angle of 0°, making it suitable for applications that require a sharp corner definition. Compatibility with the corresponding milling body and clamping components is essential; the system comprises the milling body, the indexable insert, the clamping screw and, where needed, a backing pad. For machining tasks demanding reliable edge life and process security with Tungaloy AH120 inserts, contact Metav Werkzeuge for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6800925 SKU: 6800925-Tungaloy Manufacturer SKU: TUN6800925 Model series: Fräswendeschneidplatten Material: Cemented carbide (PVD-coated) ISO designation: 1404PP Grade: AH120 Shape: Parallelogram Numbers / Core technical data Plate size: 14 mm Plate thickness: 4.76 mm Included angle: 85° Free angle: 0° Corner radius: 0 mm Countersink: 40°–60° Design / Special features Cylindrical hole with single-sided countersink One-sided chipbreaker for controlled chip flow PVD-coated carbide for wear resistance Suitable for face, shoulder, slot, high-feed and contour milling Intended for use in compatible Tungaloy milling systems FAQ What materials can be machined with this insert? The ANMT1404PP AH120 insert is a PVD-coated cemented carbide designed primarily for general milling operations; it performs well on a wide range of materials where a sharp cutting edge and process security are required. How is the insert secured in the milling body? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and is fixed with the appropriate clamping screw and backing pad as specified for the matching milling body. What does the AH120 grade mean for tool life? AH120 denotes a wear- and fracture-resistant PVD-coated carbide grade; ANMT1404PP AH120 offers extended edge life and reduced risk of chipping under typical milling conditions. Which milling operations is this geometry suited to? The parallelogram form with an included angle of 85° and a one-sided chipbreaker makes the insert suitable for face, shoulder, slot, high-feed and contour milling when used within the matching Tungaloy system. Are the dimensions compatible with standard holders? Dimensions such as 14 mm plate size and 4.76 mm thickness are industry-standard for the specified ISO designation; the insert is compatible with holders and milling bodies that accept ANMT 1404PP profiles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 and a precise parallelogram form for consistent, high-productivity milling. Order the ANMT 1404PP AH120 directly via Metav Werkzeuge or ask the consultants for application advice. ANMT 1404PP AH120 — Tungaloy milling indexable insert, PVD-coated carbide, 85° cutting angle ANMT 1404PP AH120 is an indexable insert designed for milling applications in Tungaloy milling systems, offering a wear- and fracture-resistant grade for stable, repeatable machining. PVD-coated carbide AH120 Wear- and fracture-resistant grade Parallelogram form, 14 mm size Cylindrical hole with single-side countersink Consistent cutting performance for demanding milling operations The ANMT1404PP insert delivers process security through a combination of sharp cutting geometry and a robust substrate. The PVD coating enhances surface hardness and reduces adhesion, while the carbide core provides thermal stability and edge strength; together these properties support prolonged tool life and reduced downtime. This makes the insert suitable for planar, shoulder, slot, high-feed and contour milling tasks assigned to matching tool families, where consistent chip control and dimensional repeatability are required. System compatibility that simplifies tool management Designed specifically for Tungaloy milling systems, the insert’s parallelogram shape and centre hole with a single-side countersink ensure correct seating and clamping in approved cutter bodies. Matching insert seat, geometry and cutter body is essential for secure fixation and repeatable performance; improper combinations are to be avoided. The standardised ISO designation and compatible geometries reduce setup complexity and spare-part variance, supporting a lean tooling inventory and faster changeovers on the shop floor. Durable grade and predictable chip control for productivity gains The AH120 grade is a wear-resistant, fracture-resistant formulation optimised for milling where a sharp cutting edge and stable cutting action are demanded. The one-sided chipbreaker is tuned to the insert geometry to promote controlled chip formation across a range of feeds and depths of cut. As a result, material removal rates can be maintained with lower risk of unexpected edge failure, improving overall productivity and yielding a more consistent surface finish in serial production. Selection and handling advice to maximise return on tool investment When selecting this type of insert, check the cutter body for matching seat geometry and ensure the clamping screw and any required shim are specified for the system. The insert’s 85° cutting angle and 0° clearance make it suited to general-purpose and finishing passes depending on the tool family. For best results, follow the tool-maker’s recommended cutting data and replace inserts at the first signs of edge chipping to preserve workpiece quality. Correct storage and handling will also help retain the integrity of the PVD coating and the cutting edge. Discuss your application with Metav Werkzeuge and specify the ANMT 1404PP AH120 for reliable milling performance; Metav Werkzeuge can provide technical guidance and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6800920 SKU (seller): 6800920-Tungaloy Manufacturer SKU: TUN6800920 Model series: Milling indexable inserts ISO designation: ANMT1404PP Numbers / Core technical data Size: 14 mm Thickness: 4.76 mm Cutting angle: 85° Clearance angle: 0° Corner radius: 0 Countersink angle: 40°–60° Design / Special features Material: carbide Coating: PVD Form: parallelogram Hole: cylindrical hole with single-side countersink Chipbreaker: one-sided Application: milling (plan, shoulder, slot, high-feed, contour depending on tool family) FAQ What materials can be machined with this insert? The ANMT 1404PP AH120 is a PVD-coated carbide insert intended for a broad range of milling tasks; AH120 is optimised for applications requiring a sharp cutting edge and good wear resistance, so it performs well in general steels and mixed-material production where process security is required. Is this insert compatible with any Tungaloy milling body? Compatibility requires matching the insert seat, geometry and clamping system; the ANMT1404PP designation identifies the geometry, but only tool bodies designed for ANMT-type inserts and the corresponding seat should be used. How does the AH120 grade affect tool life? The AH120 grade combines a wear-resistant substrate with a PVD surface layer to reduce edge wear and minimise chipping, which typically extends usable life under stable cutting conditions compared with uncoated alternatives. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker is designed to control chip flow in the defined cutting directions for this insert geometry, improving chip evacuation and contributing to surface quality and consistent tool forces during milling. Can the insert be used for high-feed milling? High-feed capability depends on the assigned tool family and cutter body; ANMT1404PP inserts can be used in high-feed or conventional milling operations provided the associated milling system and cutting data support the process. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP GH330 Wendeplatten - Tungaloy
Take advantage of GH330's balanced wear resistance and edge stability combined with precise seating dimensions for consistent milling performance; order through Metav Werkzeuge or consult our specialists to confirm compatibility with the intended cutter body. ANMT 1404PP GH330 indexable insert for milling — Tungaloy A ANMT1404PP GH330 Tungaloy indexable insert designed for versatile milling tasks including face, shoulder, slot, high‑feed and contour operations when matched to the correct cutter body GH330 carbide grade for wear resistance Parallelogram form for rigid seating Cylindrical hole with 40°–60° countersink 14 mm size with 4.76 mm thickness for accurate fit Longer tool life through a balanced carbide grade The supplied grade GH330 is a Tungaloy‑developed carbide that combines wear resistance with controlled toughness to maintain cutting edge integrity over longer cycles. This balance reduces the frequency of insert changes and stabilises the machining process, resulting in more consistent component tolerances. In practice, the choice of grade supports productive milling across a broad range of materials, while the engineered edge stability helps to avoid unexpected edge chipping during interrupted cuts. Precision seating and geometry for reliable machining Designed as a parallelogram‑shaped insert with a cylindrical fixing hole and a one‑sided countersink (40°–60°), the component ensures repeatable clamping and alignment in compatible milling bodies. The insert measures 14 mm across with a thickness of 4.76 mm and features an 85° approach inclination, delivering a stable contact interface and predictable chip flow. These dimensional details translate directly into improved run‑out behaviour and consistent surface quality when the insert seat, geometry and cutter body are matched correctly. Chip control and application flexibility Equipped with a single‑sided chipbreaker, the insert is tailored to promote effective chip formation and evacuation in many milling scenarios. The zero corner radius supports precise profile generation and fine finishing where a defined cutting outline is required. Depending on the assigned tool family, the insert is applicable for face, shoulder, slot, high‑feed and contour milling, offering a flexible solution for shops that require a single grade to cover multiple operations. Compatibility guidance and installation considerations This indexable component is intended for use within Tungaloy milling systems; therefore, insert seat, geometry and cutter body must be technically compatible for safe and efficient operation. The central hole and countersink arrangement require matching clamping screws and seat designs to achieve the promised stability. When integrating the insert into a tooling system, verify the cutter family and clamping torque to secure the seating and preserve the cutting edge life promised by the GH330 grade. For application verification and stock or technical enquiries regarding the ANMT1404PP GH330 insert from Tungaloy, contact Metav Werkzeuge for tailored advice and compatibility checks — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6800922 Manufacturer SKU: TUN6800922 Full article name: ANMT1404PP GH330 Tungaloy indexable insert Manufacturer: Tungaloy Material: Carbide Numbers / Core Technical Data Insert size: 14 mm Thickness: 4.76 mm Approach/angle: 85° Corner radius: 0 mm Relief/clearance angle: 0° Countersink angle: 40°–60° Designs / Special features Parallelogram insert form Cylindrical hole with one‑sided countersink Single‑sided chipbreaker Carbide grade GH330 for balanced wear/toughness Compatible with Tungaloy milling systems when seat and geometry match technical requirements FAQ What materials is this insert suitable for? The GH330 grade is formulated for general milling and offers a broad workpiece coverage; it performs well across many steels and common materials used in milling operations. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker on the ANMT1404PP GH330 promotes controlled chip formation and evacuation, which aids surface finish and reduces the risk of built‑up edge under typical milling conditions. Is the insert ready for use in any milling body? The insert will function only when the insert seat, geometry and cutter body are technically compatible; correct matching to the Tungaloy milling system is essential for safe clamping and reliable performance. What does the zero corner radius mean for finishing? A corner radius of 0 mm allows for exact profile reproduction and sharper transitions during finishing passes, making the insert suitable where defined edges are required. Which product identifiers should be used when ordering? Reference the manufacturer article number 6800922 or the manufacturer SKU TUN6800922 together with the designation ANMT1404PP GH330 to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
ANMT 1404PP T3130 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy's wear-resistant grade and a compact parallelogram geometry for reliable edge stability and long tool life; order directly via Metav Werkzeuge or consult our technical advisors for verification of seat and toolbody compatibility. ANMT 1404PP T3130 indexable insert for milling — Tungaloy ANMT1404PP T3130 as an indexable insert designed for milling applications, compatible with Tungaloy milling systems when seat, geometry and body are matched. Optimised Tungaloy grade T3130 Parallelogram form, 14 mm size Cylindrical hole with one-sided countersink One-sided chipbreaker for controlled swarf Durable grade for extended cutting cycles The insert is manufactured in a T3130 carbide grade developed by Tungaloy to balance wear resistance and toughness for milling operations. This composition maintains a stable cutting edge under intermittent loads and varying cut depths, which reduces the frequency of tool changes and supports higher machine utilisation. The design is intended to deliver consistent performance across face, shoulder and contour milling tasks, helping production planners to maintain cycle-time targets and predictable tool-life forecasts. Geometry that improves stability and chip control A parallelogram-shaped insert with a nominal size of 14 mm and a plate thickness of 4.76 mm provides a compact seating area that contributes to low-vibration cutting when correctly clamped. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and an approach/lead angle of 85°, which together ensure secure fastening and reliable axial location in compatible tool bodies. The one-sided chipbreaker aids in producing predictable swarf flow and surface finish, while the zero corner radius and 0° relief are suited to precise profiling and finishing passes. Efficiency gains through consistent surface quality Using a purpose-designed grade and geometry enables more parts to be completed within the same tool-life window, improving overall machining economy. The combination of edge stability and chip control translates into fewer reworks and more uniform part tolerances, which is particularly relevant for production runs where surface quality and repeatability matter. Typical applications covered include face milling, shoulder operations, slotting and high-feed machining depending on the chosen cutter family and cutting data. System matching and practical handling advice This insert belongs to a milling indexable insert system; the insert seat, geometry and cutter body must be technically compatible to achieve the specified performance. Correct clamping torque and orientation in the tool body are essential to preserve edge life and prevent fretting. For customers requiring confirmation of toolbody compatibility or cutting data for specific materials, Metav Werkzeuge’s technical consultants can provide application-specific guidance and cutting-parameter suggestions based on machine and material data. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts into production lines; technical checks and matching recommendations are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6853808 Manufacturer SKU: TUN6853808 Merchant SKU: 6853808-Tungaloy Type designation: ANMT1404PP Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Facts Size: 14 mm Thickness: 4.76 mm Approach/lead angle: 85° Countersink angle range: 40°–60° Corner radius: 0 mm Relief (free) angle: 0° Special features Material: carbide Grade: T3130 by Tungaloy Shape: parallelogram Hole: cylindrical hole with one-sided countersink Chipbreaker: one-sided Application: milling (face, shoulder, slot, high-feed, contour) System requirement: compatible Tungaloy milling tool body and seat FAQ Is this insert suitable for high-feed milling? The ANMT1404PP T3130 indexable insert is intended for a range of milling tasks including high-feed operations when assigned to a matching cutter family and appropriate cutting data. What material is the insert made from and what are the benefits? The insert is made of carbide in Tungaloy’s T3130 grade, offering a balance of wear resistance and toughness that supports longer cutting cycles and improved edge stability. Which tool bodies will accept this insert? This insert requires a tool body and seat designed for the ANMT-style parallelogram insert form; the seat, geometry and cutter body must be technically matched to the ANMT1404PP designation. Does the insert include a chipbreaker and what effect does it have? Yes; the insert features a one-sided chipbreaker that promotes consistent chip formation and helps achieve predictable surface finish and swarf evacuation in many milling operations. Are there any special clamping recommendations? Secure clamping with the correct torque and proper alignment in the tool body is essential to achieve the performance promised by the ANMT1404PP T3130 insert and to avoid premature wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
AOGT 040204 IC08 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts AOGT 040204 from ISCAR Brand: ISCAR Manufacturer Order Number: AOGT040204-90ALIC08 Data/ Figures: ISO-Code: AOGT040204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC08 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-AOGT-040204-IC08-ISCAR 40END
AOMT 030204 IC1008 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications AOMT 030204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT030204-N-45DTIC1008 Figures for the tool: ISO-Code: AOMT030204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC1008 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-AOMT-030204-IC1008-ISCAR 40END
AOMT 030204 IC1008 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for AOMT 030204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT030204-N-30DTIC1008 Data/ Figures: ISO-Code: AOMT030204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC1008 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: OTHER DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-AOMT-030204-IC1008-ISCAR 40END
AOMT 040204 IC1008 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications AOMT 040204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT040204-90DTIC1008 Series: DR DRILL ISO-Code: AOMT040204 Grade: IC1008 Material: cemented carbide Form: parallelogram Clearance Angle: individuell with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-AOMT-040204-IC1008-ISCAR 40END
AOMT 040204 IC808 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts AOMT 040204 from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT040204-90HDIC808 Series: DR DRILL ISO-Code: AOMT040204 Grade: IC808 Material: cemented carbide Form: parallelogram Clearance Angle: individuell with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-AOMT-040204-IC808-ISCAR 40END
AOMT 040204 IC808 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data AOMT 040204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT040204-90DTIC808 Facts / Figures: ISO-Code: AOMT040204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC808 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-AOMT-040204-IC808-ISCAR 40END
AOMT 040204 IC908 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features for indexable inserts AOMT 040204 from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT040204-90DTIC908 Series: DR DRILL ISO-Code: AOMT040204 Grade: IC908 Material: cemented carbide Form: parallelogram Clearance Angle: individuell with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-AOMT-040204-IC908-ISCAR 40END
AOMT 060204 IC508 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product features AOMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT060204-45DTIC508 Data/ Figures: ISO-Code: AOMT060204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC508 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-AOMT-060204-IC508-ISCAR 40END
AOMT 060204 IC908 Indexable Insert - ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product details AOMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT060204-45HDIC908 Facts / Figures: ISO-Code: AOMT060204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC908 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-AOMT-060204-IC908-ISCAR 40END
AOMT 060204 IC908 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for AOMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: AOMT060204-45DTIC908 Facts & Figures: ISO-Code: AOMT060204 Clearance Angle: individuell Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC908 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: DR DRILL Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-AOMT-060204-IC908-ISCAR 40END
AOMX 090308 IC328 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts AOMX 090308 from ISCAR Brand: ISCAR Manufacturer Order Number: AOMX090308TR-HMIC328 Figures for the tool: ISO-Code: AOMX090308 Clearance Angle: individuell Angle: 85° Thickness: 3,18mm Radius: 0.8 Features Material: cemented carbide Grade: IC328 Form: parallelogram Chip Breaker: - Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-AOMX-090308-IC328-ISCAR 40END
APCR 1003PD IC28 Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics APCR 1003PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APCR1003PDFR-PIC28 Series: HELIMILL/HELI2000 ISO-Code: APCR1003PD Grade: IC28 Material: cemented carbide Form: parallelogram Clearance Angle: 11° without hole Thickness: 3,18mm Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APCR-1003PD-IC28-ISCAR 40END
APCR 1003PD IC928 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APCR 1003PD from ISCAR Brand: ISCAR Manufacturer Order Number: APCR1003PDFR-PIC928 Data & Figures: ISO-Code: APCR1003PD Clearance Angle: 11° Angle: 85° Thickness: 3,18mm Special features Material: cemented carbide Grade: IC928 without hole Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APCR-1003PD-IC928-ISCAR 40END
APCR 1604PD IC28 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features APCR 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APCR1604PDFR-PIC28 Facts & Figures: ISO-Code: APCR1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC28 without hole Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APCR-1604PD-IC28-ISCAR 40END
APCR 220605 IC28 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications APCR 220605 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APCR220605-HMIC28 Facts for the tool: ISO-Code: APCR220605 Clearance Angle: 11° Angle: 85° Thickness: 6,35mm Radius: 0.5 Special features Material: cemented carbide Grade: IC28 without hole Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APCR-220605-IC28-ISCAR 40END
APCR 220620 IC28 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts APCR 220620 from ISCAR Brand: ISCAR Manufacturer Order Number: APCR220620-HMIC28 Dataand Figures: ISO-Code: APCR220620 Clearance Angle: 11° Angle: 85° Thickness: 6,35mm Radius: 2 Features Material: cemented carbide Grade: IC28 without hole Form: parallelogram Chip Breaker: single-sided Series: OTHER HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APCR-220620-IC28-ISCAR 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com