Magnetic workholding systems that speed up machining
Magnetic workholding systems provide a secure, repeatable way to fix ferrous components for machining operations, combining either mechanical or electromagnetic activation to suit milling, grinding and EDM applications. By delivering consistent holding force measured in kgf and controllable magnetic flux density in gauss, these systems improve setup speed and reduce distortion on precision parts while enabling efficient chip evacuation. Commonly used as magnetic chucks or magnet plates, they offer versatile fixturing for diverse machining centres and allow quick changeovers between jobs.
2040 Magnetic Chuck With Fine Pole Distribution 50mm Height, 28N/kg Holding Force - Vertex
Secure, precise workholding is achieved with a magnetic chuck that combines a fine pole distribution and a rated magnetic force of 28. With a 50 mm overall height and a mass of 31 kg, the unit offers stable clamping for demanding milling and grinding tasks. Order the VGF-2040B via Metav Werkzeuge or consult our specialists for integration guidance. VGF-2040B Magnetic Chuck (Fine Pole Distribution) by Vertex A magnetic chuck, VGF-2040B, offering fine pole distribution for stable workholding in precision machining. Fine pole distribution for precise clamping High magnetic force rating: 28 Solid 50 mm height for stable setup Robust build at 31 kg mass Consistent workholding for precision machining The magnetic chuck is engineered to provide repeatable clamping for a wide range of small to medium workpieces. The fine pole distribution increases the number of contact points between the workpiece and the chuck, which helps to reduce micro-movement and improves positional stability during machining. This effect is particularly beneficial when performing high-precision milling or surface grinding, where even slight shifts can affect tolerances. The specified magnetic force value of 28 indicates the chuck's holding capability as given in the product data, supporting confident selection for production tasks that require steady, vibration-resistant clamping. Faster setups and fewer auxiliary fixtures A compact overall height of 50 mm and a substantial mass of 31 kg result in a stable base that resists tipping and chatter under load. By reducing dependence on multiple mechanical fixtures, the magnetic solution streamlines clamping routines and shortens changeover times; this leads to higher machine utilisation and improved throughput. The fine pole arrangement also simplifies fixturing for irregular or segmented parts, enabling more direct and effective contact without complex jigs. The workholding plate therefore supports more efficient process flows while maintaining machining quality. Reliable performance and straightforward integration Manufactured by Vertex, this Type B workholding device is designed for workshop integration and consistent duty. The robust mass contributes to inherent damping during cutting, while the fine pole pattern preserves surface quality on sensitive components. Routine handling and machine mounting follow common workshop practices, and the product identification—SKU VGF-2040B and GTIN 4061905086748—supports ordering and inventory control. Combined with Metav Werkzeuge’s supply and advisory services, the chuck represents a practical choice for precision-focused shops seeking dependable magnetic clamping. For specification checks or ordering, contact Metav Werkzeuge in Emmerich: email info@metav-werkzeuge.com • phone +49 2822 7131930 • WhatsApp +49 170 2837271; Metav can advise on integrating the Vertex VGF-2040B into existing workflows Technical data Article number: VGF-2040B GTIN: 4061905086748 Manufacturer: Vertex eClass: 21020809 Core specifications Weight: 31 kg Height: 50 mm Magnetic force: 28 Type: B Special features Fine pole distribution Robust mass for stability Image file: vgf-1018b.jpg FAQ What is the intended application for this magnetic chuck? The VGF-2040B magnetic chuck is intended for precision workholding in machining operations such as milling and surface grinding where stable clamping and positional repeatability are required. How does the fine pole distribution affect performance? Fine pole distribution on the VGF-2040B increases contact points with the workpiece, which reduces micro-movements and improves stability, supporting tighter machining tolerances. What mounting dimensions and identification should be used for ordering? Order using the article number VGF-2040B or GTIN 4061905086748; the core mounting and integration follow standard workshop practices for a Type B magnetic chuck. Is the VGF-2040B suitable for use in production environments? Yes, the combination of the rated magnetic force, solid 31 kg mass and 50 mm height makes the VGF-2040B suitable for continuous use in production settings seeking reliable workholding. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
250mm Magnetic Chuck Round, 78mm Height, 20.2kg - Vertex
Taking advantage of compact dimensions, robust mass and consistent magnetic clamping, this round clamping plate secures small to medium workpieces while keeping setups low and accessible; order the unit directly via Metav Werkzeuge or consult our advisors for application guidance. Vertex VGD-10 round magnetic clamping plate – 250 mm diameter, 78 mm height The VGD-10 magnetic clamping plate is a round workholding solution designed for stable, space-saving clamping on machine tools and precision setups. 250 mm diameter for versatile workholding Low-profile 78 mm height for tight setups Solid 20.2 kg mass for improved stability Precision magnetic clamping for machine tool use Stable clamping for consistent machining results The core advantage of a magnetic clamping surface is a continuous, uniform grip across the face, which reduces chatter and helps to maintain dimensional accuracy during cutting or finishing operations. The combination of a 250 mm diameter and a substantial 20.2 kg mass provides inertial stability that resists vibration, while the flat round face enables predictable seating of flat or slightly profiled components. For production environments where repeatable, reliable holding is required, the magnetic clamping approach minimises mechanical clamping marks and accelerates part positioning, supporting steady cycle times and improved surface finish. Space-efficient design that simplifies setups A low-profile clamping plate reduces distance between the spindle and the workpiece, improving tool reach and visibility in constrained machine setups. With a height of 78 mm, the unit is suitable where vertical space is limited and where quick changeovers are valued. The compact footprint means fixtures and accessories can be arranged closer to the workpiece, shortening setup time and facilitating faster access for probing or tool changes. This design delivers operational convenience without sacrificing the holding performance expected from heavier workholding systems. Durable build and practical workshop integration Manufactured by Vertex, the VGD-10 combines straightforward functionality with a robust form factor that fits into a broad range of machine tool environments. The round configuration supports efficient rotation of parts and easy indexing, while the mass and geometry of the plate contribute to stable machining conditions. As a component in a well-organised workholding strategy, this clamping plate can act as a reliable base for repeat production batches or for fixtures that demand consistent magnetic retention. The model is supplied as a ready-to-mount unit for integration into standard machine tables. Speak to Metav Werkzeuge to discuss the Vertex VGD-10 and secure a compact, stable magnetic clamping solution tailored to machine tool requirements, available from our Emmerich facility Technical data Article number: VGD-10 GTIN: 4061905085598 Manufacturer: Vertex Facts Diameter: 250 mm Height: 78 mm Weight: 20.2 kg Special features Round design Magnetic clamping plate Brand: Vertex FAQ What applications is this magnetic clamping plate suitable for? The Vertex VGD-10 magnetic clamping plate is intended for machine tool workholding where stable, low-profile clamping is required for small to medium-sized flat parts. What are the exact dimensions of the unit? The plate has a diameter of 250 mm and a height of 78 mm as specified for the VGD-10. How heavy is the clamping plate and why does that matter? The unit weighs 20.2 kg; the mass contributes to vibration damping and greater stability during machining. Is the design suitable for compact machine setups? Yes, the low-profile geometry and round footprint of the VGD-10 allow closer tool access and simplified fixture arrangement in constrained setups. Which identifiers should be used when ordering or referencing this product? Reference the SKU Article number VGD-10 and GTIN 4061905085598 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
250x500mm Magnetic Chuck 26N Magnet Force, 50mm Height - Vertex
Take advantage of the combination of high holding power, robust construction and a compact profile to improve machining repeatability; order the clamping solution directly via Metav Werkzeuge or consult the advisers for technical guidance. Magnetic Clamping Plate VG-1020 — 250 x 500 mm working surface, 50 mm height (Vertex) The Magnetic Clamping Plate VG-1020 is a workshop-grade magnetic chuck designed for secure workholding during milling, grinding and light turning operations in production and toolrooms. 250 x 500 mm working surface 50 mm plate height Robust 50.3 kg construction Consistent clamping for repeatable machining results A magnetic chuck delivers fast, reproducible workholding that reduces set-up time and minimises part distortion. The VG-1020 combines a substantial working surface with a low-profile 50 mm height to keep the machining centre of gravity stable while allowing good access for cutting tools. The measured magnetic force ensures reliable contact across the entire plate, which translates into higher repeatability between batches and fewer rework cycles. For workshops that prioritise cycle stability, this magnetic clamping solution supports steady, measurable improvements in throughput. Robust design that supports industrial workflows Heavy-duty construction provides a secure base for demanding tasks: the plate’s mass of 50.3 kg enhances vibration damping and helps maintain clamp integrity under load. The solid build reduces chatter and supports consistent surface finish quality when paired with standard milling or grinding processes. The combination of robust construction and a substantial work area enables longer uninterrupted machining runs, benefiting production environments where downtime for re-clamping is costly. Clear integration into existing fixtures and processes The plate’s rectangular 250 x 500 mm format is compatible with common machine table sizes, simplifying fixture planning and reducing the need for bespoke adaptors. The relatively low profile supports flexible fixturing, making it possible to use conventional parallels and supports without compromising the clamping field. Where magnetic workholding is preferred for speed and non-invasive contact, this clamping plate offers a pragmatic balance between accessibility and secure retention. Maintenance and reliability for continuous use Magnetic chucks require routine inspection and cleaning rather than complex maintenance procedures. With periodic surface cleaning and avoidance of heavy contaminants, the unit maintains its holding power and service life. The plate’s design emphasises longevity and predictable performance, helping workshops plan maintenance intervals in line with production schedules rather than reacting to unexpected failures. This predictability supports better planning and cost control over the lifecycle of the tool. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex magnetic clamping plate into workshop operations and to discuss suitability for specific machining tasks Technical Data Article number: VG-1020 GTIN: 4061905086441 ECLASS: 21020809 Facts Dimensions: 250x500mm Height: 50mm Weight: 50.3 kg Magnetic force: 26 Special features Brand: Vertex UID: VG-1020 Image asset: vg-407-main.jpg FAQ How does a magnetic clamping plate improve setup times? A magnetic clamping plate, such as the Magnetic Clamping Plate VG-1020 from Vertex, reduces mechanical fixturing because parts are held by magnetic force, shortening fixture and alignment steps compared with mechanical clamping. Can the VG-1020 be used for precision milling and grinding? Yes, the VG-1020’s stable working surface and mass contribute to reduced vibration and improved surface finish, making it suitable for many milling and grinding applications in production and toolrooms. What maintenance is required to keep magnetic performance stable? Regular cleaning of the plate surface and removal of swarf and coolant residues will maintain magnetic performance; the VG-1020 benefits from simple, time-efficient upkeep rather than complex servicing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300mm Magnetic Chuck Round Surface, 78mm Height, 30.4kg - Vertex
The combination of reliable holding performance, space-saving low profile and a stabilising mass ensures consistent machining results; order the unit directly via Metav Werkzeuge or consult our specialists for selection advice VGD-12 Round Magnetic Chuck – 300 mm diameter, 78 mm height (Vertex) The VGD-12 Round Magnetic Chuck is a compact clamping device for secure fixation of ferromagnetic workpieces on milling and grinding machines 300 mm diameter for medium-sized workpieces 78 mm compact height for low-profile setups 30.4 kg mass for vibration damping and stability Stable, accurate clamping for medium parts The VGD-12 delivers precision clamping for a wide range of medium-sized components thanks to its 300 mm diameter. Magnetic holding eliminates many mechanical clamps, allowing for unobstructed access to the workpiece and reducing repositioning time. For machining operations where repeatable alignment and uniform contact are crucial, the magnetic surface provides even attraction across the contact area, improving process consistency and reducing the need for frequent adjustments. This results in measurable time savings over repeated setups. Low-profile design that preserves machine clearance With a total height of 78 mm, the chuck is designed for applications with limited spindle or table clearance. The compact profile helps maintain the machine tool’s working envelope while allowing secure clamping at a low centre of gravity. This design advantage supports effective tool engagement and reduces the chances of collisions or interference with fixtures, making the chuck suitable for tight or nested arrangements on the machine table. Mass and build quality that reduce vibration and improve finish Weighing 30.4 kg, the device’s inherent mass contributes to vibration damping during cutting and finishing operations. Increased stability during machining lowers chatter and enhances surface finish without additional supports. The robust construction supports steady cutting conditions which, in turn, can extend cutter life and reduce rework rates. For operations that prioritise consistent surface quality, the stability provided by the chuck is a tangible production benefit. Practical integration in the workshop and procurement reliability Supplied under SKU VGD-12 with GTIN 4061905086632, this round magnetic chuck fits standard table setups and is easy to identify for inventory and procurement processes. Delivered through Metav Werkzeuge, the product benefits from a European quality filter and dependable logistics from Emmerich, supporting uninterrupted supply to industry and trade. The clear identification and compact footprint simplify planning for storage and machine allocation in busy shops. Consult Metav Werkzeuge about the Vertex VGD-12 for precise magnetic clamping solutions and availability from our Emmerich stock, or ask our consultants for help selecting the right chuck for specific machining tasks Technical data SKU: VGD-12 GTIN: 4061905086632 Product: Round magnetic chuck Manufacturer: Vertex Facts Diameter: 300 mm Height: 78 mm Weight: 30.4 kg eClass: 21020809 Special features Round design Compact low-profile height High mass for vibration damping Asset image available: vgd-06-main.PNG FAQ What are the key dimensions of the chuck? The VGD-12 round magnetic chuck has a diameter of 300 mm and a height of 78 mm, making it suitable for medium-sized setups where a low profile is required. Is the chuck suitable for heavy-duty machining? The chuck’s mass of 30.4 kg provides stabilising weight that helps reduce vibration during machining; assessment of suitability for specific heavy-duty operations should consider machine capacity and cutting parameters. Which workpiece materials can be held by this chuck? Magnetic chucks are generally intended for ferromagnetic materials; for confirmation on compatibility with particular alloys or parts, refer to the product specifications and consult technical guidance. How is the product identified for ordering and inventory? This device is listed under SKU VGD-12 with GTIN 4061905086632 for straightforward procurement and stock management. Can the chuck be used on different machine tables? The round design and compact height allow versatile placement on standard machine tables; ensure the table mounting and clamping arrangement are suitable for the intended operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x600mm Magnetic Chuck 26N/cm² Holding Force, 48mm Height - Vertex
Take advantage of the combination of a compact 300 x 600 mm footprint, a low 48 mm profile and a substantial mass of 73.5 kg for stable, repeatable workholding; order the VG-1224 magnetic clamping plate directly via Metav Werkzeuge or consult the sales engineers for tailored advice. VG-1224 Magnetic Clamping Plate – 300 x 600 mm, 48 mm profile | Vertex A VG-1224 magnetic clamping plate designed for secure, repeatable workholding of flat ferrous components in machine-shop environments. *Compact 300 x 600 mm footprint *Notable holding value 26 *Low 48 mm profile for tight setups Consistent magnetic holding for precise machining The VG-1224 delivers reliable magnetic holding characterised by a defined holding value of 26, which translates into consistent clamping force across the plate surface. This steadiness reduces workpiece movement under cutting loads and supports dimensional accuracy during milling and grinding. The magnetic action secures ferrous parts without mechanical clamps, simplifying set-up sequences and reducing obstruction in the machining envelope. The result is improved cycle stability and fewer reworks for precision-dependent operations. Space-efficient design that improves accessibility With a 300 x 600 mm working area and a slim 48 mm profile, the clamping plate is suitable where machine table clearance is limited. The low profile helps maintain minimal tool-to-workpiece distance and supports fixtures that require tight vertical tolerances. Smaller footprint equipment benefits from the plate’s compactness while still offering an ample magnetic surface for medium-sized components. This layout supports quicker access and easier toolpaths, promoting throughput in busy workshops. Mass and stability for vibration damping At 73.5 kg, the assembly provides intrinsic stability that assists in damping vibrations during cutting. The mass works in favour of improved surface finish and reduced chatter when paired with appropriate machining parameters. Handling and mounting should be planned in accordance with the plate’s weight; when installed on a machine table, the mass contributes to a solid foundation for repeatable operations, enhancing overall process reliability in series or batch production. Practical integration and straightforward maintenance The magnetic clamping principle means setup is often quicker than with mechanical clamps, reducing non-productive time between operations. The plate is compatible with standard machine tables and can be incorporated into existing workholding strategies. Routine maintenance focuses on keeping the contact surface clean and free of swarf or coolant residues to preserve magnetic holding performance and protect the plate geometry. The straightforward design supports long service life when standard workshop care procedures are observed. Contact Metav Werkzeuge to discuss how the Vertex VG-1224 magnetic clamping plate fits specific workholding needs; technical staff are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: VG-1224 GTIN: 4061905095436 Manufacturer: Vertex Data Dimensions: 300x600 mm Height: 48 mm Weight: 73.5 kg Magnetic force: 26 Special features ECLASS: 21020809 Image file: vg-407-main.jpg Product type: magnetic clamping plate FAQ What types of workpieces are suited to this magnetic clamping plate? The VG-1224 magnetic clamping plate is intended for flat ferrous workpieces; the magnetic system secures steel-based components for machining and finishing tasks. How does the magnetic holding value of 26 affect machining performance? A holding value of 26 indicates consistent magnetic clamping across the surface, aiding in stability and reducing the likelihood of workpiece movement during cutting on the Vertex VG-1224. Is the plate difficult to integrate into an existing machine table? Integration is straightforward: the VG-1224 mounts on standard tables and supports typical shop routines, with the plate’s compact dimensions easing positioning and set-up. What maintenance is required to preserve holding performance? Regular cleaning of the contact surface and removal of swarf and coolant residues will maintain the magnetic holding characteristics of the VG-1224 and extend service life. Does the weight of 73.5 kg impact handling and installation? The mass of 73.5 kg contributes to stability and vibration damping; appropriate handling equipment or assistance should be used during installation to ensure safe and accurate placement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x600mm Magnetic Chuck Very Fine Pole Distribution, 30 kgf Holding Force - Vertex
Take advantage of secure workholding and a very fine pole distribution to improve repeatability and reduce rework; the combination of a 300 x 600 mm clamping surface and a magnetic force rated 30 ensures stable machining performance. Order the magnetic clamping plate directly via Metav Werkzeuge or consult the team for specification guidance. Magnetic clamping plate VRTW-1224A — 300 x 600 mm, very fine pole distribution (Vertex) The Magnetic clamping plate VRTW-1224A is a Type A, heavy-duty workholding solution designed for precision machining where fine pole spacing and consistent holding power are required. 300 x 600 mm clamping surface Very fine pole distribution 50 mm plate height for stable support Magnetic force rated 30 for secure hold Robust construction, 77 kg mass Consistent holding for precision results A finely graded pole pattern combined with a clear magnetic force rating delivers repeatable clamping for delicate and small components. The very fine pole distribution reduces the need for additional fixtures, enabling secure contact across complex workpiece geometries and minimising movement during milling or grinding. The result is improved dimensional integrity and fewer secondary operations, which supports a more predictable production flow and higher first-pass yield. Designed for workshop integration and stability With a clamping surface of 300 x 600 mm and a plate height of 50 mm, the unit offers a compact footprint that still provides a generous working area for many machining tasks. At 77 kg, the construction adds mass where it matters, increasing damping and stability on the machine table without compromising positional accuracy. These dimensions make the plate straightforward to position on standard machine beds and allow for confident, vibration-resistant workholding during interrupted cuts. Faster setup for varied part sizes The Type A design and very fine pole spacing are suited to precise positioning of small to medium components, reducing reliance on elaborate mechanical fixtures. The pole layout provides multiple clamping points close together, allowing for better distribution of holding forces and fewer adjustments between jobs. For shops aiming to shorten setup times and increase throughput, this workholding system supports quicker changeovers and more flexible part orientation while maintaining safe clamping performance. Traceability and manufacturer quality Manufactured by Vertex, the clamping plate is identified for ordering and inventory by SKU VRTW-1224A and GTIN 4061905094910, facilitating procurement and traceable asset management. The robust build quality reflects workshop-grade expectations and supports consistent service life under normal machining conditions. For operations requiring clear documentation and durable equipment, the model integrates into existing workflows while offering straightforward identification for maintenance records. Contact Metav Werkzeuge in Emmerich for a tailored specification and to secure the Vertex VRTW-1224A for precision workholding Technical data Article number: VRTW-1224A GTIN: 4061905094910 Manufacturer: Vertex ECLASS: 21020809 Facts Dimensions: 300 x 600 mm Height: 50 mm Weight: 77 kg Magnetic force: 30 Special features Very fine pole distribution Type: A SKU: VRTW-1224A FAQ How does the fine pole distribution affect clamping performance? The very fine pole distribution on the Magnetic clamping plate VRTW-1224A increases the number of contact points, improving grip on irregular or small components and reducing the need for extra fixtures. Is the plate suitable for small, delicate parts? Yes. The fine pole spacing and Type A design allow delicate components to be held securely with lower local clamping pressure while maintaining positional stability during machining. What are the key dimensions and weight for machine setup? The clamping surface measures 300 x 600 mm, the plate height is 50 mm and the unit weight is 77 kg, enabling assessment of machine table compatibility and fixturing requirements. How can the VRTW-1224A be ordered or referenced? Order and inventory tasks can use SKU VRTW-1224A and GTIN 4061905094910 for precise identification and traceability when procuring the Vertex magnetic clamping plate. Does the product come from a recognised manufacturer? Yes. The magnetic clamping plate is produced by Vertex, a manufacturer known for machine tool accessories and workholding solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck 26 N Holding Force, 100x175mm - Vertex
Take advantage of a compact footprint and strong magnetic hold for dependable clamping in busy workshops; the combination of a 100 x 175 mm working area, 50 mm profile and a substantial holding force of 26 ensures stable, repeatable set-ups and reduced rework. Order the VG-407 magnetic chuck directly via Metav Werkzeuge or ask our consultants for tailored advice. Vertex VG-407 Magnetic Chuck — compact 100 x 175 mm, 50 mm height The VG-407 Magnetic Chuck is a compact magnetic workholding solution engineered for secure, low-profile clamping in machine shops and precision workshops. Compact 100 x 175 mm footprint 50 mm height for low-profile clamping Holding force 26 for secure workholding Efficient, measurable workholding for consistent results The VG-407 offers a compact footprint that suits crowded machine tables and small fixtures while maintaining a holding force 26 that delivers measurable stability during machining operations. By concentrating on the core parameters—100 x 175 mm working area and low profile—this magnetic chuck reduces set-up complexity, helping to shorten cycle times and decrease scrap rates. The design supports repeatable positioning, so end results are consistent and inspection rework is minimised, which in turn contributes to a more efficient production flow. Low-profile design that speeds up set-up and handling A 50 mm height together with a moderate mass of 7.2 kg means the unit sits low on the machine table and is easy to manoeuvre when reconfiguring fixtures. The compact mass aids in safe handling while the low profile improves access for milling heads and grinding wheels, making clamping and unclamping faster. The result is a practical balance between rapid set-up and operational stability: fewer interruptions during batch changes and reduced time between operations translate directly into increased shop-floor productivity. Practical reliability backed by a trusted supplier Supplied under the Vertex name, this magnetic workholding plate combines straightforward functionality with workshop durability. Metav stands for democratisation of precision and supports this product with a reliable European supply chain and expert advice from Emmerich. That combination of reliable supply and localised stock control contributes to predictable lead times and uninterrupted production planning. For workshops seeking a dependable, compact magnetic chuck for regular use, the VG-407 represents a pragmatic choice built around practical benefits rather than complexity. Contact Metav Werkzeuge for personalised advice and to secure the VG-407 magnetic chuck for prompt dispatch from Emmerich. Technical details Article number: VG-407 GTIN: 4061905083853 Brand: Vertex Core specifications Dimensions: 100x175mm Height: 50mm Weight: 7.2 kg Magnetic force: 26 Special features ECLASS: 21020809 Category: Vertex FAQ What is the VG-407 best used for? The VG-407 magnetic chuck is intended for magnetic workholding tasks in machine shops and precision workshops where a compact, low-profile clamping solution is required. What are the physical dimensions and mass? The magnetic chuck measures 100 x 175 mm, has a height of 50 mm and a weight of 7.2 kg. How strong is the magnetic hold? The VG-407 provides a holding force value of 26, offering secure clamping for routine machining and inspection processes. Is the VG-407 suitable for frequent set-up changes? Yes. The unit’s low profile and manageable mass support rapid set-up and easier handling during frequent fixture changes. Which brand manufactures the chuck and what is the SKU? This magnetic chuck is produced by Vertex and stocked as SKU VG-407 for convenient ordering and tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck Fine Pole Distribution, 28 kgf Holding Force - Vertex
Benefit from precise, repeatable workholding thanks to the combination of fine pole distribution, strong magnetic clamping force and a compact 50 mm profile for stable machining operations. Order the magnetic chuck directly via Metav Werkzeuge or consult the specialists if additional information is required. VGF-1545B Magnetic chuck (Type B) — fine pole distribution, compact 50 mm height (Vertex) A VGF-1545B magnetic chuck designed for precision workholding in machining and inspection, featuring a fine pole pattern that improves contact and grip on small or irregular ferrous parts Fine pole distribution for uniform clamping Robust steel body, height 50 mm High magnetic clamping force for stability Vertex quality, SKU VGF-1545B Improved precision and repeatability on critical components The fine pole pattern delivers a larger number of smaller contact zones, which results in more uniform clamping and reduced local deformation of workpieces. This effect benefits finishing operations and measurement tasks by promoting repeatable positioning and minimising runout. The design translates directly into fewer reworks and improved process reliability when holding delicate or thin ferrous parts. Compact design that speeds setup and keeps workflows efficient With a low profile of 50 mm and a total mass of 26 kg, the workholding plate occupies minimal vertical space while offering a secure base for machining. The compact footprint facilitates faster fixturing and makes it simpler to integrate into existing set-ups or inspection benches. The result is a measurable improvement in throughput and a reduction in non-productive time for changeovers. Robust construction for consistent performance and low upkeep Designed with industrial use in mind, the chuck combines a solid build with a magnetic system rated at magnetic force: 28, ensuring stable workholding under cutting loads. Routine cleaning of the pole faces and inspection of the pole distribution are the primary maintenance tasks; these simple procedures preserve the magnetic clamping force and extend service life. The robust approach reduces long-term downtime and supports a dependable production flow. Practical benefits translated into production gains By choosing this magnetic workholding solution, shops gain a balance of precision, stability and compactness that supports both small-batch finishing and repeatable measurement tasks. The fine pole distribution expands the range of geometries that can be held securely, while the strong magnetic attraction lowers the need for additional mechanical clamps. For operations prioritising surface quality and dimensional accuracy, this magnetic chuck offers a clear operational advantage. For trusted Vertex workholding with reliable delivery and local expertise, contact Metav Werkzeuge in Emmerich for tailored advice and supply coordination. Technical data Article number: VGF-1545B GTIN: 4061905086274 Brand: Vertex Classification: 21020809 Facts Weight: 26 kg Height: 50 mm Magnetic force: 28 Type: B Special features Fine pole distribution Magnetic workholding plate Compact, low-profile design FAQ What is the primary application of this magnetic chuck? The VGF-1545B magnetic chuck by Vertex is intended for secure workholding of ferrous workpieces during machining and inspection, offering repeatable positioning and improved surface quality. Can non-ferrous parts be clamped with this workholding plate? Non-ferrous parts cannot be held magnetically; the magnetic chuck is suitable for ferrous materials, while non-ferrous components require mechanical clamping or dedicated fixtures. How does the fine pole distribution affect smaller workpieces? The fine pole distribution increases the number of contact points, improving grip on small or irregular parts and reducing the likelihood of local deformation, which supports finer surface finishes and stable cutting conditions. What basic maintenance is required to keep performance consistent? Regular cleaning of the pole faces and periodic inspection of the pole distribution are recommended; these measures maintain the magnetic clamping force and help preserve the service life of the VGF-1545B. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck Fine Pole Distribution, 28 N/cm² Holding Force - Vertex
Take advantage of the combination of fine pole distribution, a magnetic force of 28 and a robust 50 mm height for consistent, distortion-free workholding; order the VGF-1540B magnet chuck directly via Metav Werkzeuge or contact our consultants for tailored advice. VGF-1540B Magnet chuck — fine pole distribution, 50 mm height The VGF-1540B is a magnet chuck engineered for precision workholding with a fine pole distribution, suitable for machining and grinding tasks where uniform clamping and minimal part distortion are essential. Fine pole distribution for thin workpieces High magnetic force of 28 for firm hold Robust 50 mm height for stability Solid 24 kg mass dampens vibration Secure clamping for delicate and flat parts A fine pole distribution creates a more even magnetic field across the work surface, reducing localised clamping pressure and lowering the risk of surface marks on thin or finely finished parts. This results in a steadier setup during grinding and light machining, improving surface quality and reducing rework. The design is particularly suitable where consistent contact and low deformation are required, delivering measurable gains in process reliability. Stable base for precision machining The chuck’s construction, with a 50 mm height and a weight of 24 kg, provides a stable platform that helps absorb and damp machining forces. Combined with a magnetic force of 28, the unit offers reliable retention of ferrous workpieces during moderate cutting and finishing operations. The overall effect is improved positional stability and reduced vibration, which supports tighter tolerances and better repeatability on the machine table. Practical workshop integration and upkeep The magnetic clamping plate is straightforward to incorporate into standard setups and benefits from low mechanical complexity. Routine care mainly requires keeping the pole faces and the workpiece contact area clean and free from swarf, coolant residues and rust; this preserves holding performance and extends service life. For specialist applications or questions about mounting and compatibility with specific machines, consult Metav Werkzeuge’s technical team for precise guidance. For reliable precision and straightforward integration, order the Vertex VGF-1540B magnet chuck via Metav Werkzeuge — our Emmerich-based team can advise on suitability and setup at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VGF-1540B GTIN: 4061905095412 ECLASS: 21020809 Type: B Measurements & weight Height: 50 mm Weight: 24 kg Magnetic force: 28 Features Product: Magnet chuck Pole configuration: Fine pole distribution Manufacturer: Vertex FAQ What kinds of workpieces are suitable for this magnetic chuck? Magnetic chucks like the VGF-1540B are best for ferrous (magnetic) and flat workpieces; the fine pole distribution improves support for thin and precision-ground parts. How does the fine pole distribution affect surface finish? A fine pole layout spreads clamping force more evenly, reducing pressure peaks and the likelihood of marking or distortion during machining with the VGF-1540B. Is the VGF-1540B heavy enough for stable machining? Yes, the chuck’s mass of 24 kg and a 50 mm height provide beneficial stability and vibration damping for many finishing and light machining tasks. What routine maintenance is required? Keep the pole faces and contact surfaces clean and dry; regular inspection for debris and corrosion will maintain the magnetic performance of the VGF-1540B over time. Can this chuck be used on grinding machines? The design and fine pole distribution make the VGF-1540B suitable for grinding operations where secure, uniform holding of flat ferrous components is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck Fine Pole Distribution, 28A Holding Force - Vertex
Take advantage of the combination of fine pole distribution, high magnetic force and robust mass for reliable, repeatable clamping in precision machining. Order the magnetic chuck directly via Metav Werkzeuge or ask our consultants if additional details are required. Magnetic chuck VGF-2045B — magnetic chuck with fine pole distribution and magnetic force 28 A Magnetic chuck VGF-2045B designed for secure, repeatable workholding in machining and grinding applications, featuring a compact 50 mm profile and purpose-built fine-pole layout. Fine pole distribution for precise clamping High magnetic force 28 for secure holding Solid construction, 36 kg mass for stability 50 mm height, compatible with standard setups Greater process stability through concentrated holding power The chuck combines a fine pole distribution with a measured magnetic force of 28 to ensure stable clamping of ferrous components. The relatively high mass of 36 kg and a slim 50 mm profile reduce vibration and support consistent machining results, which enhances throughput and lowers the rate of rework. This configuration promotes a steady setup time and improves surface finish by limiting micro-movements during cuts. The design prioritises mechanical robustness and predictable performance for shops that require dependable holding during milling and grinding. How fine-pole technology improves part accuracy Fine-pole technology distributes the magnetic field across many small poles, creating a uniform magnetic field that increases contact area with small or irregular parts. This reduces the need for auxiliary fixtures and minimises marking on worked surfaces while still providing secure retention. For delicate or geometrically complex components, the distributed field yields better seat and orientation compared with coarse-pole chucks, leading to improved precision and fewer alignment steps. The principle is straightforward: more even magnetic pressure equals more consistent machining outcomes. Designed for efficiency, handling and shop-floor integration Built as a Type B unit by Vertex, the chuck’s construction focuses on workplace efficiency and safe handling. The weight contributes to stability, damping tremor under load, while the modest height supports compatibility with many machine tables without excessive setup adjustments. The combination of fine-pole design and sturdy mass shortens clamping cycles and supports higher repeatability between batches. For procurement and operations teams this translates into measurable gains in cycle time and reduced machine downtime, reinforcing a rational case for inclusion in regular workholding inventories. Contact Metav Werkzeuge to discuss how the Vertex VGF-2045B magnetic chuck can be integrated into existing machining processes; our specialists in Emmerich provide tailored advice and rapid supply options Technical data SKU: VGF-2045B GTIN: 4061905086151 Type: B ECLASS: 21020809 Core specifications Weight: 36 kg Height: 50 mm Magnetic force: 28 Special features Fine pole distribution Brand: Vertex Image available FAQ What materials is the chuck suitable for? The magnetic chuck VGF-2045B is intended for ferrous workpieces and benefits machining processes that require magnetic retention and stable clamping. How does the fine pole distribution affect small workpieces? Fine pole distribution on the VGF-2045B creates a uniform magnetic field, improving contact and retention for small and irregular components without excessive marking. What dimensions and mass should be considered for machine compatibility? The unit has a height of 50 mm and a mass of 36 kg; these values should be checked against the machine table and load limits before installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 28 N/cm Holding Force - Vertex
Take advantage of a compact, high‑stability magnetic clamping solution that combines fine pole distribution with substantial holding capacity and a low profile for tight machine envelopes. Rely on the robust mass and repeatable magnetic force to reduce setup time and maintain process stability. Order directly via Metav Werkzeuge or consult the Metav team for application advice. VGF-1530B Magnetic chuck (Type B) — fine pole distribution, 50 mm height The VGF-1530B is a Type B magnetic chuck with fine pole distribution, designed for precise workholding where uniform contact and a compact profile are required in machining and grinding environments. Fine pole distribution for uniform clamping Compact 50 mm profile for low centre height Magnetic force rating 28 for dependable hold Robust 18 kg mass enhances machining stability Precision clamping that safeguards surface quality and repeatability The combination of a fine pole distribution and a stable magnetic circuit delivers consistently even clamping pressure across the workpiece surface. This reduces distortion and surface marking, which in turn helps to preserve component tolerances during material removal. The unit’s magnetic force is specified as 28, providing a dependable hold that supports uninterrupted machining cycles. The mass of the assembly contributes to damping and reduces vibration, improving finishing results and repeatability between batches. Compact profile for easier integration into existing setups With a 50 mm compact height, the chuck minimises changes to machine centre height and permits installation in confined machine spaces without extensive fixturing modifications. The low profile helps to maintain tool reach and cutting geometry, so operators can retain familiar setups while benefiting from stronger, more uniform clamping. The design suits production cells where space efficiency and consistent datum control are essential for throughput and quality. Built for continuous production with low maintenance The magnetic clamping plate is engineered for straightforward, long‑term operation: a stable magnetic system with minimal routine servicing keeps lifecycle costs low and downtime to a minimum. The durable construction and even pole layout mean set‑up times are reduced and handling is simplified, which supports faster changeovers and steadier production rates. For procurement teams, the device represents a practical balance of reliability and operational efficiency from a recognised industrial brand. Contact Metav Werkzeuge today to secure the Vertex VGF-1530B magnetic chuck with fine pole distribution and receive tailored advice from Metav Werkzeuge on application and integration. Technical data SKU: VGF-1530B GTIN: 4061905085543 Type: B eClass: 21020809 Facts Height: 50 mm Weight: 18 kg Magnetic force: 28 Special features Fine pole distribution Brand: Vertex Product image available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b5/2f/97/63/63972fb5c806fb82109e3432/vgf-1018b.jpg FAQ What types of workpieces are suitable for use with this magnetic chuck? The VGF-1530B is intended for clamping ferromagnetic workpieces, where magnetic clamping offers a secure, even hold for machining and finishing operations. How does the fine pole distribution benefit machining results? Fine pole distribution increases contact uniformity and reduces localised pressure peaks, improving surface finish and dimensional stability during cutting and grinding on the magnetic chuck. What does the 50 mm height mean for machine setup? A compact 50 mm profile keeps changes to centre height minimal and allows integration into machines with limited clearance while maintaining familiar tool geometry. Is the VGF-1530B suitable for repetitive production runs? Yes; the stable magnetic force and substantial mass of the clamping plate are designed to support consistent, repeatable clamping throughout series production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 28 N/cm Magnetic Force - Vertex
Secure workholding with a fine pole distribution and a compact 50 mm profile ensures consistent accuracy in small-part machining; combine reliable clamping and robust construction for fewer reworks and stable cycle times. Order the VGF-1535B magnetic chuck directly via Metav Werkzeuge or ask our consultants if needed. VGF-1535B Magnetic Chuck – fine pole distribution, 50 mm height by Vertex VGF-1535B is a magnetic clamping plate designed for secure fixation of small to medium workpieces in machining and grinding applications Fine pole distribution for small workpieces Rated magnetic force: 28 Robust 50 mm height construction Weighs 21 kg for stable machining Consistent clamping for precise machining cycles The magnetic workholding plate delivers repeatable grip for short production runs and precision tasks, reducing repositioning time and scrap rates. The fine pole distribution is engineered to increase contact area on smaller components, which improves holding stability without increasing surface distortion. With a compact profile and solid mass, the unit helps maintain concentricity during turning and milling, contributing directly to cycle reliability and lower downstream inspection effort. Low-profile design that suits constrained setups A shallow construction facilitates integration into low-clearance fixtures and enables use on tables with limited Z travel while retaining sufficient holding performance. The compact geometry supports close-proximity tooling and short overhangs, meaning setups can be completed faster and with less adjustment. Built to work in workshop conditions, the clamping plate balances stiffness and accessibility for manual loading as well as automated workholding, simplifying changeovers and reducing non-productive time. Workshop safety, handling and lifecycle benefits Robust mechanical design and clear handling characteristics make the device suitable for frequent use in production environments. Stable mass and even pole spacing reduce the risk of part movement under machining loads, while the construction allows measured cleaning and inspection intervals to preserve magnetic performance. For operators and engineers, this translates into predictable maintenance cycles and fewer unexpected interruptions to production — backed by proven manufacturing from Vertex and supply reliability through Metav Werkzeuge. Choose the Vertex VGF-1535B for fine-pitch clamping where space and accuracy matter, and contact Metav Werkzeuge in Emmerich for a tailored quotation or technical consultation including specification support Technical data SKU: VGF-1535B GTIN: 4061905085253 Manufacturer: Vertex Facts Weight: 21 kg Height: 50 mm Magnetic force (rating): 28 Special features Fine pole distribution Type: B ECLASS: 21020809 FAQ Is the magnetic chuck suitable for small, delicate workpieces? The VGF-1535B magnetic chuck from Vertex is designed with a fine pole distribution to improve contact on small components and reduce the risk of movement during machining. Can the plate be used on both milling and grinding machines? Yes, the magnetic clamping plate VGF-1535B is suitable for a range of machining and grinding operations where a low-profile, stable hold is required. How does the fine pole distribution affect part surface condition? Fine pole spacing on the Vertex VGF-1535B spreads the holding force more evenly across small surfaces, which helps to minimise local distortion while maintaining secure fixation. What are the main handling considerations for this magnetic chuck? Due to its mass (21 kg) and compact height (50 mm), the VGF-1535B should be handled with appropriate lifting aids or team lifting for safe mounting and removal. Is technical documentation available for setup and maintenance? Technical documentation and specification details for the Vertex VGF-1535B are available; Metav Werkzeuge can provide additional guidance on correct installation and maintenance practices. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 28N Holding Force - Vertex
Benefit from the fine pole distribution, a compact 50 mm profile and a magnetic force rating of 28 for dependable clamping and repeatable setups; order the magnetic chuck directly via Metav Werkzeuge or consult the specialists for application support. Magnetic chuck VGF-1018B — Vertex, fine pole distribution, 50 mm height The Magnetic chuck VGF-1018B is a low-profile magnetic clamping plate engineered for reliable holding of ferrous workpieces in milling, grinding and general machining environments. Fine pole distribution for small parts Magnetic force rating 28 for stable clamping Compact 50 mm height for low-profile setups Solid 7 kg mass for improved stability Faster setups and predictable clamping performance The compact design delivers a measurable advantage in cycle times: the magnetic force rating of 28 provides consistent holding power while the fine pole distribution reduces the minimum contact area required for small components. This pole layout increases contact points and improves surface conformity, which helps to reduce vibration and minimise rework. The reduced clamping variability translates into shorter set-up durations and greater process reliability for repetitive series production, increasing throughput without changing tooling. Low-profile design for closer tool approach and greater flexibility A slim 50 mm profile allows a closer approach of the cutting tool and lowers the workpiece centre of gravity, enabling more rigid support and safer machining when space is limited. The relatively solid 7 kg mass contributes to damping during cutting, while the compact footprint supports easy integration into existing fixtures or machine tables. For workshops seeking to optimise spindle access and reduce overhang, the compact profile enhances machining options and simplifies fixture design. Practical workshop use and support from an experienced supplier Maintenance is straightforward: keeping the pole faces clean and free of swarf preserves clamping efficiency and surface quality. The simple mechanical concept avoids complex service routines and suits both shop-floor use and demanding tooling environments. Metav Werkzeuge combines a broad product range with application know-how; their catalogue and advisory service support the selection and integration of Vertex clamping solutions, backed by a European logistics hub that acts as a quality filter for reliable supply. For tailored advice on integrating the Vertex VGF-1018B into production, contact Metav Werkzeuge's specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss clamping requirements and lead times. Technical data Article number: VGF-1018B GTIN: 4061905083471 Manufacturer: Vertex ECLASS: 21020809 Dimensions & performance Height: 50 mm Weight: 7 kg Magnetic force: 28 Features Fine pole distribution Type: B Product type: Magnetic chuck UID: VGF-1018B FAQ What size workpieces suit this magnetic chuck best? The Vertex magnetic chuck VGF-1018B performs well with small to medium ferrous workpieces where a fine pole distribution is required for improved contact and positioning. How does the fine pole distribution affect machining results? Finer pole spacing increases contact points and reduces marking on small components, so the VGF-1018B helps to improve surface finish and reduces the need for secondary operations. Is the VGF-1018B suitable for low-clearance setups? Yes, the compact 50 mm profile is designed to allow a closer tool approach, making it appropriate for low-clearance fixtures and tight machine environments. What basic maintenance does the chuck require? Regular cleaning of the pole faces and removal of swarf preserves clamping performance; the VGF-1018B relies on straightforward upkeep rather than complex servicing. Can the magnetic chuck be integrated into existing fixtures? The VGF-1018B’s compact format and standard mounting dimensions support easy integration into fixtures and machine tables for improved flexibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 28N Magnetic Force - Vertex
Take advantage of the combination of precise clamping for small parts, a compact 50 mm profile and consistent holding power to keep machining runs efficient and repeatable. Order directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Magnetic chuck VGF-1018BS (fine pole distribution) by Vertex – 50 mm profile, magnetic force 28 Magnetic chuck VGF-1018BS is a compact magnetic clamping plate designed for secure holding of ferrous workpieces in machining and measuring operations Fine pole distribution for small workpieces Compact 50 mm profile for limited spindle clearance Secure magnetic force 28 for steady clamping Precise clamping for small, intricate components The Magnetic chuck VGF-1018BS uses a fine pole distribution to distribute magnetic field lines in close intervals, which improves contact across small or irregular surfaces. This reduces the need for additional mechanical fixturing and minimises repositioning time. The result is improved repeatability and fewer rejects in batch runs, which supports higher throughput on milling, grinding or inspection stations. The fine-pole design is particularly beneficial when working with thin or small parts that would otherwise rock or lift on coarser pole layouts. Low-profile design that keeps machines accessible With a 50 mm height, the clamping plate offers a low-profile solution that helps preserve spindle clearance and reduces the risk of collisions in compact setups. The reduced vertical envelope makes integration into existing workstations straightforward, while still delivering a stable clamping surface. This compact form factor supports flexible fixturing plans and keeps tooling lines short, contributing to faster job changes and a more efficient shop-floor workflow. Reliable holding performance and simple handling Engineered to provide consistent clamping, the plate’s magnetic force 28 gives a dependable grip on ferrous materials during machining operations. At a practical weight of 7 kg, the unit is sturdy yet manageable for workshop handling and positioning. The magnetic clamping principle eliminates mechanical stress points on the workpiece, reducing distortion and the need for repeated alignments. These attributes combine to lower cycle times and protect critical tolerances, delivering measurable gains in production reliability. For specific application queries or to secure a Vertex VGF-1018BS magnetic chuck for the workshop, contact Metav Werkzeuge’s Emmerich quality team via info@metav-werkzeuge.com or call +49 2822 7131930 to obtain detailed technical documentation and purchasing options Technical Data SKU: VGF-1018BS GTIN: 4061905094965 Brand: Vertex Type: BS ECLASS: 21020809 Facts Height: 50 mm Weight: 7 kg Magnetic force: 28 Special features Magnetic clamping plate Fine pole distribution FAQ What is the main advantage of a fine pole distribution? A fine pole distribution provides closer magnetic poles across the clamping surface, improving contact on small or irregularly shaped ferrous parts and reducing the need for additional fixtures for precision work. Which machines is this magnetic plate intended for? The VGF-1018BS magnetic clamping plate is intended for stationary machining and inspection equipment where magnetic fixturing of ferrous workpieces is suitable. What holding performance can be expected? The specified magnetic force is 28, which provides dependable holding for many standard machining tasks; final suitability depends on workpiece geometry and cutting forces. How does the 50 mm profile benefit workshop layout? A 50 mm height conserves spindle clearance and allows installation in tight envelopes, supporting compact fixturing and quicker machine set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 30 N Magnet Force - Vertex
Take advantage of the combination of compact dimensions, very fine pole distribution and a stable magnetic rating for reliable, low-profile workholding in precision applications; order the magnetic chuck directly via Metav Werkzeuge or consult their specialists for system integration. VRTW-1018A Magnetic chuck (Type A) — compact 100 x 175 mm, 50 mm height by Vertex VRTW-1018A is a magnetic chuck designed for precise clamping of small to medium workpieces, offering a very fine pole distribution for improved contact and machining accuracy. Very fine pole distribution Compact 100 x 175 mm footprint 50 mm overall height Robust construction, 7 kg mass Precision clamping in a compact footprint The magnetic chuck delivers focused holding power on a small surface area without adding unnecessary bulk to the machine table. With a 100 x 175 mm footprint and a low profile of 50 mm, this unit is suited to tight set-ups where vertical clearance is limited. The very fine pole distribution improves contact on thin or irregular parts, reducing the need for additional fixturing and increasing effective machining area. Such a configuration supports higher part density on the table while maintaining the precision required for repeatable surface finishes. Predictable holding force for consistent machining results Engineered to provide a stable magnetic rating, the chuck is specified with a magnetic force of 30, ensuring reliable grip during milling, grinding and light turning operations. Predictable retention reduces vibration and micro-movement, which in turn lowers scrap rates and rework. The magnetic system's behaviour is straightforward to assess during set-up, enabling quicker cycle starts and improved throughput — a clear rational advantage in production and small-batch manufacturing where process consistency matters. Streamlined integration into existing workflows Designed for workshops that prioritise efficient fixturing, the unit’s compact mass and profile simplify table planning and toolpath clearance. The chuck is compatible with standard machining processes and can be incorporated into jigs or dedicated fixtures where space is a premium. For equipment selection and integration advice, Metav’s specialist offering combines product range and practical guidance to help match the clamping solution to the intended process, thereby reducing procurement complexity and downtime during implementation. Durable design with minimal maintenance requirements At a mass of 7 kg, the construction balances solidity with manageable handling during installation and storage. The fine pole layout is less prone to localised wear on contact points, supporting longer intervals between maintenance tasks. Regular cleaning of pole faces and magnetic surfaces preserves clamping performance; when serviced according to routine workshop practice, the chuck continues to deliver the stable holding characteristics that contribute to dependable production output. For precision clamping with Vertex quality, contact Metav Werkzeuge for tailored advice and ordering — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: VRTW-1018A GTIN: 4061905083983 Model: Type A Mass: 7 kg Footprint: 100 x 175 mm Height: 50 mm Facts Magnetic force: 30 Weight: 7 kg Dimensions: 100 x 175 mm Height: 50 mm Special features Magnetic chuck Very fine pole distribution Compact, low-profile design Suitable for precision workholding FAQ What materials can be clamped with this magnetic chuck? The VRTW-1018A magnetic chuck is intended primarily for ferromagnetic materials; its very fine pole distribution improves contact with thin sheets and small components made of steel and similar alloys. How does the fine pole distribution benefit machining? A finer pole pitch increases contact area on small or irregular parts, reducing local deformation and improving stability during milling and grinding with the VRTW-1018A. Is the chuck suitable for low-clearance setups? Yes. The 50 mm overall height and compact 100 x 175 mm footprint make the unit well suited to installations where vertical space is limited. How heavy is the unit and how does that affect handling? The unit weighs 7 kg, offering a robust feel while remaining manageable for workshop personnel during mounting and removal. Can the VRTW-1018A be used on rotary tables or specialised fixtures? The compact dimensions and stable magnetic rating make the chuck appropriate for integration on rotary tables and bespoke fixtures where small form-factor workholding is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Magnetic Chuck With Fine Pole Distribution, 30 N Magnetic Force - Vertex
Take advantage of the combination of precise clamping, compact dimensions and easy integration for a reliable workholding solution in small- to medium-sized machining tasks. Order the unit directly via Metav Werkzeuge or consult the team for application advice. Vertex VRTW-1018S magnetic chuck – 50 mm height, fine pole distribution The Vertex VRTW-1018S is a compact magnetic chuck designed for secure workholding in milling, grinding and general machining where fine pole distribution and a small footprint are required Fine pole distribution for precision clamping Compact 100 x 175 mm footprint 50 mm plate height for stable support Rated magnetic force 30 High-precision clamping for small footprints The magnetic chuck is engineered to deliver consistent holding performance in confined set-ups. With a fine pole distribution the holding surface distributes magnetic attraction across smaller zones, which improves grip on thin, irregular or small workpieces while reducing deformation. The compact 100 x 175 mm footprint and 50 mm plate height enable installation on smaller machine tables or dedicated fixtures without sacrificing stability. For production environments where component repeatability and setup speed matter, the combination of fine pole spacing and stable plate geometry reduces the need for additional mechanical clamps, so cycle times can be shortened and handling steps minimised. Improved process reliability and straightforward operation Magnetic workholding with this design supports efficient part positioning and repeatable clamping force. The device’s rated magnetic force of 30 provides a clear specification for process planning and toolpath safety assessments. Because magnetic attraction occurs across the whole pole array, the risk of point loading and local distortions is reduced, which benefits surface finish and measurement stability. Operational benefits include faster set-up and simplified alignment routines; once the part is placed it is held uniformly, enabling machining strategies to be executed with confidence and fewer interference checks. Robust design and suitable applications The workholding plate is specified for workshop and light industrial applications where reliable magnetic retention is required. Its mass and construction confer vibration damping during cutting and grinding operations, helping to protect delicate edges and improve dimensional outcomes. Typical uses include small batch milling, surface grinding of thin components and fixture-based inspection tasks where secure, repeatable holding is essential. The compact nature of the unit also makes it well suited to retrofit situations and secondary operations where space is limited but accurate clamping cannot be compromised. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VRTW-1018S into existing workflows—call +49 2822 7131930 or eMail info@metav-werkzeuge.com for specification guidance and ordering support Technical Data Article number: VRTW-1018S GTIN: 4061905094927 ECLASS: 21020809 Facts Dimensions: 100 x 175 mm Height: 50 mm Weight: 7 kg Magnetic force: 30 Special features Designation: Magnetspannplatte Secondary designation: with very fine pole distribution Brand: Vertex FAQ What materials can be clamped with this magnetic chuck? The magnetic chuck is intended for ferromagnetic materials; parts made from steel and similar alloys are compatible with the Vertex VRTW-1018S magnetic chuck. Is the unit suitable for grinding and milling operations? Yes. The plate’s construction and fine pole distribution support both grinding and light-to-moderate milling tasks where stable magnetic retention is required. How is the plate mounted to a machine table? Mounting details depend on the machine interface; the Vertex VRTW-1018S is designed for use on flat machine tables or fixtures where it can be fixed mechanically or by secondary clamps as required. Does the magnet force affect thin workpieces? Fine pole distribution reduces local deformation on thinner sections by spreading the magnetic pull over a greater number of smaller poles, improving grip while limiting distortion. How should the chuck be maintained to ensure long service life? Regular cleaning of the clamping surface and protection from ferrous contamination will preserve holding performance; wear and surface flatness should be checked periodically to maintain precision. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Angular permanent magnetic plate
Technische Daten: Bezeichnung: Magnetspannplatte VHM Abmessung: 100x175mm - 300x600mm Gewicht: 7,2 kg - 73,5 kg Magnetkraft: 26 Kg Höhe: 48mm bis 50mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Fine Pole Magnetic Plate
Technische Daten: Bezeichnung: Magnetspannplatte Vollhartmetall Abmessung: 100x175mm bis 300x600mm Gewicht: 7 kg bis 77 kg Typ: A, S Magnetkraft: 30 Kg Höhe: 50mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Magnetspannplatte rund
Technische Daten: Bezeichnung: Magnetspannplatte Vollhartmetall Durchmesser: 150 mm bis 300 mm Gewicht: 9,8 kg bis 30,4 kg Höhe: 78mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Middle pitch permanent magnetic chuck
Technische Daten: Bezeichnung: Magnetspannplatte Vollhartmetall Gewicht: 7 kg bis 36 kg Typ: B, BS Magnetkraft: 28 Kg Höhe: 50mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex VERTEX ist seit 1978 der führende Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² hat VERTEX die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch einen starken Fokus auf Forschung und Entwicklung ist VERTEX bekannt für seine innovativen Designs, die die Leistung und Effizienz von Maschinen steigern. Die hohe Lagerverfügbarkeit von 98% aller Artikel ermöglicht es den Kunden, schnell und unkompliziert auf ihre Bedürfnisse zu reagieren. VERTEX legt großen Wert auf Qualität und Kundenzufriedenheit und ist bestrebt, die individuellen Anforderungen der Kunden zu erfüllen. Als vertrauenswürdiger Hersteller ist VERTEX stets bereit, seinen Kunden hochwertige Maschinenteile anzubieten und einen herausragenden Service zu gewährleisten.
Secure accurate machining with magnetic workholding systems
magnetic workholding systems, often referred to as magnetic chucks or magnetic plates, provide a reliable method for fixing workpieces during precision machining. These systems secure ferrous components for operations on milling, grinding and EDM machines and are available with either mechanical activation or electromagnetic control. Consistent clamping and quick changeover make them a practical choice for modern workshops.
How the systems work and where they are essential
In practice, a magnetic chuck creates a holding field across the workpiece surface so that machining forces are absorbed without conventional mechanical clamping. Activation is either manual (mechanical) or switchable (electromagnetic), allowing for safe loading and repeated positioning. The strength of the magnet is expressed as magnetic flux density in Gauss, while the practical holding capability is stated in kgf (kilogram-force), giving objective, comparable values for setup planning.
Measurable benefits that speed up production
- Reduced setup time through instant holding and straightforward activation methods.
- Improved repeatability, supporting tighter tolerances and fewer reworks.
- Versatile machine compatibility with milling, grinding and EDM applications.
- Quantifiable holding performance via Gauss and kgf specifications for process planning.
- Safer handling when using electromagnetic activation for secure on/off control.
Metav as the partner for dependable workholding solutions
Metav combines deep specialist know-how with a broad, quality-controlled range, making it the pragmatic choice for procurement. From Emmerich, Metav operates as a quality filter for the european market, supplying over 250,000 products and trusted by more than 48,000 customers. This scale reduces supplier count for workshops while ensuring steady availability and reliable logistics from our site in Emmerich am Rhein.
Technical data — key measures and applications
- Suitable for milling, grinding and EDM
- Activation: mechanical or electromagnetic
- Holding strength indicated in kgf
- Magnetic strength indicated in Gauss
- Designed for secure clamping of ferrous workpieces
FAQ
What types of operations are magnetic workholding systems suitable for?
magnetic workholding systems are suitable for milling, grinding and EDM operations where a flat, secure contact area can be established between chuck and workpiece.
How is the holding force specified and compared?
Holding force for magnetic chucks is typically given in kgf, while the magnetic field intensity is stated in Gauss; both values allow objective comparison between systems.
Can I switch the magnetic effect on and off during loading?
Yes. Magnetic workholding systems are available with mechanical activation or electromagnetic switching, enabling safe loading and rapid activation when required.
Why choose Metav for magnetic chucks?
Metav offers a broad, quality-checked selection and consistent supply from Emmerich, backed by decades of specialist experience and a large, satisfied customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com