Precision messtables with integrated fixtures for stable, repeatable inspection
Messtables with integrated fixtures provide a vibration‑free platform designed for high‑accuracy inspection and laboratory testing, combining a precision baseplate with rigid mechanical structures to ensure process‑reliable measurements. These systems serve as stationary test stands for serial part inspection and complex laboratory setups, offering users the benefits of a granite base or customised plates with M8 threaded holes and T‑slots for flexible fixturing. By rigidly coupling the base and the build‑up structure, measurement errors from slippage or deflection are minimised, enabling repeatable accuracy, stable mounting, and modular configurability for diverse metrology and quality assurance tasks.
300mm Runout Tester For Diameters Up To 130mm, 16mm Travel Of Movable Tips, Cast Construction - Metav IndustryLine
Ensure consistent rotational accuracy with the combination of 0.01 mm measurement resolution, a cast-iron frame for vibration damping and a 16 mm travel of the movable centres; order the device directly via Metav Werkzeuge or consult our specialists for application advice. Runout tester M208.200 — 300 mm runout gauge for diameters up to 130 mm (Metav IndustryLine) A Runout tester M208.200 designed for precise rotational runout inspection of shafts and cylindrical components, ideal for workshop and small-series quality control. 0.01 mm resolution for precise runout checks Cast-iron frame and centres for stable measurements Movable centres travel 16 mm Suitable for diameters up to 130 mm Consistent, verifiable accuracy for quality control The core advantage is the 0.01 mm resolution, which makes the device suitable for standard workshop inspections and finer control tasks. Classified within the standard measuring range (up to 300 mm), this gauge offers a balance of reach and stiffness that fits routine machine‑shop use. In practical terms, the shown resolution allows operators to detect minute eccentricities that would otherwise pass unnoticed during manual assembly or balancing operations, supporting process decisions and reducing rework. Stable construction reduces measurement scatter Built with a cast-iron frame and centres, the apparatus delivers high intrinsic damping and resistance to thermal and mechanical influences. The substantial mass (weight 50 kg) and the defined structural geometry help to absorb vibration and keep the datum alignment stable during rotation. The result is improved reproducibility: repeated checks give consistent values, which simplifies statistical control and traceability in inspection logs and reduces uncertainty in final acceptance testing. Flexible centring and straightforward handling The device features measuring centres with a conical 60° tip and a movable-centre travel of 16 mm, enabling secure contact with a wide range of workpiece geometries without the need for complex fixtures. The cross arm (Ø10 x 150 mm) and column (Ø12 x 176 mm) dimensions provide a rigid support for the rotating part while allowing quick adjustments. For routine runout checks, the set-up time is minimised: once the component is supported between the centres, rotation and measurement can proceed immediately, which improves throughput in repetitive inspection tasks. Designed for workshop integration and reliability Engineered for daily industrial use, the gauge is optimised for rotational inspection of components up to 130 mm diameter within a 300 mm measuring envelope. The robust design and simple mechanical principle make maintenance straightforward and long-term operation economical. As part of the Metav IndustryLine range, the device benefits from a distribution and quality filter based in Emmerich, ensuring reliable availability and documentation for purchasers in Europe. Contact Metav Werkzeuge for bespoke advice on application and ordering of the Metav IndustryLine runout tester M208.200; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.200 GTIN: 4054469183541 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Maximum measurable diameter: up to 130 mm Accuracy / resolution: 0.01 mm Movable-centre travel: 16 mm Weight: 50 kg Overall length: 720 mm Cross arm: Ø10 x 150 mm Column: Ø12 x 176 mm Special features Cast-iron frame and centres Measuring centres 60° (height 176 mm) Suitable for rotational runout inspection Designed for workshop and small-series inspection FAQ How accurate is the runout measurement on this tester? The runout gauge offers a resolution of 0.01 mm, enabling detection of small eccentricities suitable for standard workshop quality control. What size of components can be inspected? Components with diameters up to 130 mm can be supported and checked within the device’s 300 mm measuring envelope. What advantages does the cast-iron construction provide? The cast-iron frame and centres increase damping and structural stability, improving reproducibility and reducing the influence of vibration on measurements. Does the device allow adjustment for different part geometries? Yes, the movable centres with 16 mm travel and the conical 60° measuring centres permit secure centring of a variety of cylindrical parts. Is the runout tester part of a defined product line? The device is supplied under Metav IndustryLine and is intended for reliable workshop integration and routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Runout Tester For Shafts, 0.005mm Accuracy, 100mm Max Workpiece Length, Grooved Roller - Metav IndustryLine
Benefit from 0.005 mm runout resolution, a compact 1–35 mm measuring range and simultaneous dual-point inspection that speeds up series checks. Secure consistent radial and face runout control with a grooved support roller and fine handwheel adjustment. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Runout testing device M208.213 — precise runout control, 1–35 mm range The Runout testing device M208.213 is a bench instrument for verifying radial and axial runout on shafts and small cylindrical components, optimised for repeatable shop‑floor inspection. 0.005 mm measurement resolution Measuring range 1–35 mm Simultaneous dual-point measurement Suitable for series measurements Precise measurement where it matters The instrument delivers an exacting 0.005 mm accuracy, making it suitable for quality checks where tight concentricity and face runout are critical. The fine resolution supports detection of minute deviations that can cause vibration, premature bearing wear or assembly misfit. As a result, production tolerances are easier to maintain and rework rates can be reduced, which contributes directly to consistent throughput and predictable part quality. The device is presented as a metrology tool for repeat inspections rather than a one-off check. Compact range with practical benefits With a 1–35 mm measuring range and a maximum workpiece length capacity of 100 mm, the tester covers small to medium shafts commonly encountered in precision assemblies. The roller with grooves secures cylindrical parts and prevents slippage while the robust construction keeps the measuring geometry stable. The comparatively light weight of 3 kg and bench footprint enable positioning on workshop measuring tables or integration with a stand for repeatable setups, combining reach and rigidity in a compact package. Faster series inspection through dual‑point measurement The design permits simultaneous dual-point readings, which halves the number of repositioning steps for many workpieces and speeds up throughput in serial testing. A manual fine‑adjustment handwheel allows controlled, tactile alignment and minimises operator-induced variability during setup. These features together create a workflow advantage: fewer handling steps, shorter cycle times and more reproducible results for batch inspection without sacrificing accuracy. Designed for workshop reliability Built for routine use, the instrument supports continuous series inspection and is adapted to the demands of a production environment. The construction emphasises repeatability and user ergonomics, reducing the chance of setup errors and enabling technicians to perform consistent runout assessments throughout a shift. Where calibration and traceability are required, regular calibration routines should be scheduled to maintain measurement certainty in line with internal quality plans. Contact Metav Werkzeuge today to discuss how the M208.213 can be integrated into existing inspection processes or to request tailored advice for specific shaft inspections Technical data Article number: M208.213 Label: Rundlaufprüfgerät 1 - 35 mm, 0,005 mm max. Werkstücklänge 100 mm, Rolle mit Nuten Manufacturer: Metav IndustryLine Key figures Measuring range: 1.0–35 mm Maximum workpiece length: 100 mm Accuracy: 0.005 mm Weight: 3 kg Aufnahme: 8 Special features Roller with two grooves (mit 2x Einschnitte) Simultaneous measurement at two positions Hand-operated fine adjustment (handwheel) Suitable for series measurements Compatible with bench mounting / use with stand FAQ What kinds of parts can be inspected with this runout tester? The runout tester is designed for shafts and small cylindrical components; the M208.213 handles parts up to 100 mm in length within the 1–35 mm diameter range. How does the dual‑point measurement help in production? Measuring at two positions at once reduces repositioning and shortens cycle time, which improves throughput during batch or series inspection. Is the instrument portable between workstations? At 3 kg and with a compact bench footprint, the unit is readily moved between measuring tables and can be mounted on appropriate stands for fixed setups. How is slippage prevented during measurement? The roller support features two grooves that stabilise cylindrical parts, ensuring repeatable seating and lower measurement scatter. Can the device be used for both radial and face runout checks? Yes; the tester is configured for radial and axial runout verification on cylindrical workpieces within its geometric limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Runout Tester With 0.002mm Resolution, Two-Point Measurement, Grooved Rollers, 100mm Max Workpiece Length - Metav IndustryLine
Take advantage of the combination of 0.002 mm accuracy, a compact 1–35 mm measuring range and grooved rollers for repeatable support to streamline runout inspection in production. Order the runout tester directly via Metav Werkzeuge or ask our consultants if needed. M208.210 Runout Tester — compact runout testing device with 0.002 mm accuracy by Metav IndustryLine M208.210 is a precision runout testing device designed for evaluating radial and axial runout on shafts and small cylindrical components in production and inspection environments. High resolution 0.002 mm accuracy Measuring range 1–35 mm Grooved rollers for secure support Simultaneous two-point measurement Precision and repeatability for production control The unit delivers 0.002 mm repeatability within a compact 1–35 mm measuring window, making it suitable for fine runout verification where tight tolerances matter. With this level of resolution, the device supports statistical process control and in-line quality checks by providing a stable, quantifiable measurement base; variances that would otherwise pass unnoticed can be identified quickly. The calibrated mechanical guidance and firm roller support reduce measurement scatter, so each check contributes reliable data for production decisions and corrective actions. Secure support and faster throughput in series inspections Designed to hold workpieces up to 100 mm length on grooved rollers with two slots, the instrument minimises slippage and centring errors during rotation. The roller arrangement enables simultaneous two-point measurement, which halves setup time when identifying eccentricity across multiple surfaces. A tactile hand wheel offers fine adjustment for alignment without complex fixtures, improving handling speed and keeping cycle times low for batch testing. These features together increase throughput while maintaining consistent measurement conditions for repeated inspections. Practical workshop integration and clear operational benefits The compact construction and roughly 3 kg mass make the device easy to position on a bench or a metrology table while retaining the stiffness needed for reproducible results. It suits routine checks in machine shops, quality departments and small-series manufacturing where reliable runout data is required without a large footprint. Note that the unit is supplied without a dial gauge, allowing users to pair their preferred indicator or sensor depending on the measurement chain and traceability requirements. For workshop adoption this flexibility supports existing calibration strategies and measuring equipment inventories. For precise runout verification choose the Metav IndustryLine M208.210 — contact Metav Werkzeuge for a tailored supply and technical advice. Technical data SKU: M208.210 GTIN: 4054469183725 eClass: 27201190 Numerical data Measuring range: 1.0–35 mm Maximum workpiece length: 100 mm Accuracy: 0.002 mm Weight: 3 kg Mounting positions: 8 Special features Grooved rollers with two cuts Simultaneous two-point measurement Hand-operated fine-adjustment wheel Supplied without dial gauge / fine measuring instrument Suitable for series measurements FAQ What accuracy can be expected from this runout tester? The runout tester delivers an accuracy of 0.002 mm, enabling sub-micron-sensitive evaluation for demanding runout inspections. What is the measuring range and maximum workpiece length? Measuring range is 1.0–35 mm with a maximum recommended workpiece length of 100 mm for reliable support and repeatable results. Are the rollers suited for cylindrical shafts and small components? Yes, the grooved rollers with two cuts provide secure support for shafts and small cylindrical parts, improving centring and stability during measurement. Is a dial gauge included with delivery? No, the device is supplied without a dial gauge so that the preferred indicator or electronic sensor can be fitted according to the user’s measurement chain. Can this device be used for series inspections? The design and adjustment features make it particularly suitable for series measurements, allowing efficient repetitive checks in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Runout Tester With 0.005mm Resolution, Max 100mm Workpiece Length, Plain Roll, Two-Point Measurement - Metav IndustryLine
Take advantage of precise runout control combined with compact handling: the device delivers 0.005 mm repeatability across a 3–35 mm diameter range and accepts workpieces up to 100 mm long, enabling efficient serial inspection with reliable results — order the runout tester directly via Metav Werkzeuge or ask our consultants if needed. Runout Tester M208.212 — 0.005 mm accuracy, 3–35 mm diameter The Runout Tester M208.212 is a compact measuring instrument for assessing radial and axial runout on shafts and short components in workshop and production environments. High precision 0.005 mm runout resolution Diameter range 3–35 mm for small shafts Simultaneous two-point measurement capability Compact for workpieces up to 100 mm long High-precision control for production quality The tester provides a 0.005 mm accuracy class that supports tight quality tolerances in machining and assembly. Such resolution reduces the need for repeated rework by detecting radial deviations at an early stage, improving process yield. The numerical specification is directly relevant for production control and incoming inspection, since the instrument translates small geometric deviations into actionable information for machine settings and corrective grinding. The emphasis on measurable precision strengthens traceability and shortens decision cycles during batch release. Built for efficient measurements on short shafts With a measuring range from 3–35 mm and a permitted workpiece length up to 100 mm, the device is tailored to inspections of small-diameter shafts, pins and short couplings. The capability for simultaneous two-point measurement halves the inspection time for concentricity checks and reduces handling steps in serial workflows. A manual handwheel provides fine positioning without the need for complex fixtures, which simplifies repetitive measurements in production and quality laboratories where throughput and reproducibility are essential. Practical mechanics that protect parts and simplify handling The roller is supplied without grooves, avoiding contact marks on finished surfaces while still providing stable support for rotating parts. Built as a compact unit and weighing approximately 3 kg, the instrument is easy to position on a bench or measuring table and integrates well with existing inspection jigs. Robust mechanical design and a clear focusing on repeatable clamping and rotation ensure that measurement scatter is minimised and inspection results remain consistent from piece to piece. Contact Metav Werkzeuge today for technical advice or to arrange a specification review for the Runout Tester M208.212 Technical Data Article number: M208.212 GTIN: 4054469183756 Label: Runout tester 3–35 mm, 0.005 mm, max. workpiece length 100 mm Facts Measuring range: 3–35 mm Max. workpiece length: 100 mm Resolution / accuracy: 0.005 mm Weight: 3 kg Mounting: 8 Special features Two-point simultaneous measurement Roller without grooves Handwheel for fine adjustment Suitable for serial measurements Compact design for bench use FAQ How accurately can runout be measured with this tester? The runout tester achieves an accuracy of 0.005 mm, allowing reliable detection of small radial deviations on shafts within the specified range. What shaft diameters and lengths are supported? The instrument covers diameters from 3–35 mm and is designed for workpieces up to 100 mm long, making it suitable for short shafts and small rotating parts. Can two measurements be taken at the same time? Yes — the device supports simultaneous two-point measurement, which speeds up concentricity and runout checks during serial inspections. Will the roller damage finished surfaces? The roller is supplied without grooves, which minimises marking on the component surface while still providing secure support during rotation. Which SKU identifies this product for ordering? Order references: M208.212 (GTIN 4054469183756) for procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3–25mm Runout Testing Device With Spring-Loaded Adjustable Contact Wheel, Aluminium - Filetta
Take advantage of high repeatability (0.002 mm) and a compact 3–25 mm measuring range combined with a spring-loaded, height-adjustable pressure roller for consistent contact during runout checks; order the device directly via Metav Werkzeuge or consult our specialists for tailored application advice. Runout tester MS910.491 — compact runout measuring device, 0.002 mm accuracy (Filetta) Runout tester MS910.491 is a compact measuring device for quickly checking radial runout on small shafts and precision components in machining and quality control environments. Compact 3–25 mm measuring range for small diameters High repeatability with 0.002 mm resolution Spring-loaded height-adjustable pressure roller for consistent contact Aluminium-alloy body for low weight and stable alignment Precision that speaks for itself The instrument delivers 0.002 mm accuracy, making it suitable where tight radial tolerances are required. The measuring range 3–25 mm targets small-diameter parts such as pin shafts, small bearings and precision spindles; this positions the unit in the micro class of runout testers, where space efficiency and stiffness are crucial. Stated accuracy is a decisive factor for quality assurance workflows: repeatable readings reduce rework and support faster go/no-go decisions on the production line. Designed for repeatable contact and straightforward setup Mechanical features are chosen for reproducibility and ease of use. The body is machined from aluminium alloy, keeping the total mass to 3.5 kg while maintaining alignment. A spring-loaded, height-adjustable pressure roller ensures uniform contact force across measurements, while the integrated handwheel aids fine positioning. The device accepts mounting or reception at Ø6 mm and Ø8 mm, and is provided with a fixing pin Ø7.56 mm for secure fixturing. Two threaded mounts (2x M8) are available for attachment to stands or fixtures, supporting stable tests and quick alignment to a reference axis. Note: delivery excludes a dial indicator and the additional accessories shown in product images. Where it fits in the workshop and what it enables This compact runout tester is suited to toolrooms, precision assembly benches and inspection departments that need a fast, reliable check of concentricity and radial deviation on small components. The device helps to identify out-of-tolerance shafts before final assembly, lowering scrap rates and speeding process control routines. The combination of low mass, compact footprint and consistent contact control makes it straightforward to integrate into bench setups or paired with a stand for repeat measurements. For procurement decisions, the Filetta MS910.491 delivers a balance of precision, handling and quick fixturing that supports efficient quality gates. For reliable runout measurement with the Filetta MS910.491, contact Metav Werkzeuge in Emmerich to arrange supply or discuss suitability for specific parts and fixtures Technical data Article number: MS910.491 Brand: Filetta Category: Messgeräte / Schaubstock | Prismen Material: Aluminium alloy Included accessory: Fixing pin Ø7.56 mm Note: Delivery without dial indicator and additional accessories shown in image Facts Measuring range: 3.0–25.0 mm Maximum accuracy: 0.002 mm Weight: 3.5 kg Mounting threads: 2x M8 Accepts Ø6 mm and Ø8 mm reception Special features Spring-loaded, height-adjustable pressure roller Handwheel for fine adjustment Compact design for micro-range components Stable aluminium-alloy construction FAQ How small a shaft can be checked with this runout tester? The runout tester MS910.491 covers a measuring range from 3.0 to 25.0 mm, so it is intended for small-diameter shafts and similar precision components. What level of precision can be expected during repetitive measurements? Repeatability is expressed as 0.002 mm, enabling consistent runout checks suitable for tight-tolerance quality control tasks with the Filetta runout tester MS910.491. Can the device be mounted to a stand for repeated checks? Yes. The unit has 2x M8 mounting threads and accepts Ø6 mm and Ø8 mm receptions, allowing secure mounting to stands or fixtures for reproducible setups. Is a dial gauge included for measurement readout? No. The delivery explicitly excludes a dial indicator and the other accessories pictured; the tester is supplied with the fixing pin Ø7.56 mm only. What benefits does the spring-loaded pressure roller provide? The spring-loaded, height-adjustable pressure roller ensures consistent contact force across the measured surface, reducing variation caused by manual pressure and improving measurement repeatability. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
500mm Runout Tester With 170mm Measuring Height, 16mm Travel Of Movable Tips, Cast Frame - Metav IndustryLine
Take advantage of the combination of high repeatability, a 0.02 mm accuracy class and a rigid cast construction for reliable runout inspection across small to medium components; order the runout tester directly via Metav Werkzeuge or ask our consultants for specification matching. Runout tester M208.201 – 500 mm measuring range, 0.02 mm accuracy (Metav IndustryLine) The Runout tester M208.201 is a bench-mounted runout inspection device for radial and rotational accuracy checks on components up to 500 mm, designed for precision workshops and metrology tables. 500 mm measuring range Accuracy 0.02 mm for precise control Cast frame and centres for dimensional stability Movable centres with 16 mm travel Consistent measurement performance for quality control The instrument delivers a defined measurement environment that reduces variation in production testing. With a guaranteed accuracy of 0.02 mm, the bench enables traceable runout checks and consistent pass/fail decisions during incoming inspection or in-process control. The 500 mm measuring range covers typical shaft and rotor lengths encountered in toolrooms and small-component manufacturing, while the measuring height of 170 mm allows clearance for standard fixtures. Operationally, the device supports repeatable radial checks by securing the component between centres and rotating it under observation, which reduces rework and speeds throughput. Stable cast construction reduces setup uncertainty A heavy, rigid chassis improves reproducibility by lowering natural vibration and thermal sensitivity. The frame and tailstock components are cast for rigidity, providing a stable reference surface that maintains alignment under load; the unit’s mass (approx. 80 kg) further dampens external disturbances. The twin centres are machined to a 60° tip angle and 176 mm tip height to suit common shaft profiles, and the movable centre travel of 16 mm allows fine axial positioning without additional fixtures. Together, these features mean fewer adjustments before measurement and a lower risk of operator-induced deviation. Practical dimensions and integration into the workshop Designed for placement on a metrology table or dedicated measuring bench, the tester’s overall length of 920 mm and compact cross‑section (cross arm Ø10×150 mm, column Ø12×176 mm) make it straightforward to integrate into existing inspection stations. The unit supports standard rotational checks and can be combined with external measuring instruments for amplitude analysis or dial indicators for visual readout. The instrument is supplied as a robust bench device suited to production and maintenance environments where repeatability and mechanical stability are priorities; documentation and traceable identifiers assist in process control and inventory handling. Choose Metav IndustryLine for stable metrology hardware—contact Metav Werkzeuge in Emmerich for technical matching and fast supply of the M208.201 runout tester Technical data SKU: M208.201 GTIN: 4054469105352 ECLASS: 27201190 Label: Runout tester 500 mm measuring height 170 mm, 80 kg Facts Measuring range: 0–500 mm Measuring height: 170 mm Nominal accuracy: 0.02 mm Weight: 80 kg Overall length: 920 mm Movable centres travel: 16 mm Cross arm: Ø10×150 mm Column: Ø12×176 mm Special features Frame and centres made from cast for stiffness Measuring centres with 60° tip angle, height 176 mm Designed for bench-mounted runout inspection Category: Messtisch / metrology table application Manufacturer brand: Metav IndustryLine FAQ What measuring range does the tester cover? The runout tester covers a measuring range of 0–500 mm and a measuring height of 170 mm, suitable for small to medium shafts and rotors. What level of accuracy can be expected? The device provides a nominal accuracy of 0.02 mm, enabling repeatable radial measurements for quality control tasks. Which features ensure measurement stability? Stability is achieved through a cast frame and centres, substantial unit mass (~80 kg) and machined centre geometry, which together reduce vibration and setup drift. Is the tester suitable for a production environment? Yes—the construction and dimensional data (920 mm length, solid mounts) make it appropriate for workshop and production metrology stations. How is the product identified for ordering and inventory? Order and identify the unit by SKU M208.201 or GTIN 4054469105352; the unit is listed under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
700mm Motorised Test Stand With Portable Colour Touch Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of motorised control, ISO 17025 traceability and seamless data export to speed up testing cycles while keeping results reproducible; order supplies or request tailored advice from Metav Werkzeuge for efficient integration into existing metrology workflows. Test stand — Motorised test stand with 1,000 N capacity and colour touchscreen (Microtech Metrology) The Test stand is a motorised testing rig for precise force and displacement checks, offering a 0–700 mm travel range and a portable 2.4" colour touchscreen for on-bench operation. Motorised travel control, smooth and reproducible 1,000 N maximum load capacity Colour 2.4" touchscreen portable display Wireless and USB data output for easy logging Traceable accuracy for routine quality checks The motorised rig delivers repeatable force application and a fine reading resolution of 0.001 N, making it suitable for routine quality control and R&D work where small differences matter. Supplied calibrated under ISO 17025, the unit arrives with a calibration certificate that documents traceability and reduces administrative overhead during audits. This combination of documented accuracy and fine resolution supports reliable pass/fail decisions and consistent sample comparison. Fast data capture and straightforward integration Equipped with Wireless and USB outputs and a colour 2.4" touchscreen, the device simplifies measurement logging and process documentation. Digital readout and export options reduce manual transcription, lowering the risk of human error while enabling immediate transfer to laboratory information systems or spreadsheet-based workflows. The portable display supports on-bench checks and facilitates data review without interrupting the test sequence. Motorised motion for consistent throughput Motorised travel removes variability caused by manual adjustment, so each cycle follows the same speed and position profile — a clear benefit for comparative testing and durability routines. The controlled motion increases throughput without sacrificing measurement integrity, translating into shorter test times for repetitive tasks and more reliable statistical results from production samples. Built for workshop and laboratory environments Designed for industrial metrology use, the unit combines a compact footprint with robust mechanics and compatibility with profile-measuring setups. The travel span of 0–700 mm covers a broad range of components while maintaining stiffness for reproducible readings. The portable display and wireless connectivity make the system adaptable across lab benches and inspection stations, supporting both hands-on technicians and automated data acquisition. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology motorised test stands into existing measurement chains, and to obtain the ISO 17025 calibration certificate and data-export options — email info@metav-werkzeuge.com or call +49 2822 7131930 for personal consultation Technical data Article number: 278170108 GTIN: 4061905460135 Manufacturer: Microtech Metrology Facts Measurement range: 0–700 mm Maximum load: 1,000 N Reading resolution: 0.001 N Display: Colour 2.4" touchscreen Data output: Wireless, USB Type: Motorised Special features Portable display included Digital operation Supplied calibrated to ISO 17025 Suitable for 2D profile measurement workflows Compact footprint for bench use FAQ Is the calibration certificate included with the test stand? Yes. The Microtech Metrology test stand is delivered fully calibrated and includes an ISO 17025 calibration certificate documenting traceability for the unit (SKU 278170108). What data interfaces are available for automated logging? The unit offers Wireless and USB outputs for direct export of measurement data to PCs or networked acquisition systems. What is the maximum force the device can apply? The motorised system supports a maximum load of 1,000 N, suitable for a wide range of component force tests. Which measurement range does the system cover? Travel covers 0–700 mm, providing sufficient reach for most small to medium-sized components used in laboratory and workshop contexts. Can the unit support repeated automated cycles for production testing? Yes. Motorised advancement ensures repeatable motion profiles that are suitable for comparative and cyclical testing in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Ø60 mm Messtisch Stand With Ø22x180 mm Column, Fine Adjustment, Base 149x90x30 mm - Microtech Metrology
Take advantage of a compact, workshop-ready solution that combines a fine-adjustment spindle with a Ø60 mm measuring table and a rigid Ø22 × 180 mm column for reproducible indicator positioning — order directly via Metav Werkzeuge or request advice from our consultants. Stand — Dial gauge stand with fine adjustment and Ø60 mm table (Microtech Metrology) The Stand is a dial gauge stand designed for stable, repeatable measurements in workshops and inspection benches, combining a compact base with micrometre-style positioning for precise indicator alignment. Fine-adjustment mechanism for micrometre positioning Large Ø60 mm measuring table for stable mounting Rigid column Ø22 × 180 mm for consistent support Compact base 149 × 90 × 30 mm for bench stability Precision control for reliable measurement results The combination of a fine adjustment mechanism and a robust support geometry enables controlled, small-step positioning of indicators, reducing setup variability. A micrometre-like adjustment removes abrupt movements and helps achieve repeatable contact force when taking readings. This level of control suits routine inspection tasks where small deviations matter and contributes directly to reduced rework and faster quality checks. The dial gauge stand concept supports common workshop indicators and makes precise comparative measurements straightforward. Stable construction for repeatable setups A substantial Ø60 mm measuring table and a Ø22 × 180 mm column form the mechanical backbone for consistent mounting and resistance to lateral play. The 149 × 90 × 30 mm base sits low on the bench to minimise rocking, while the vertical support maintains alignment during repeated measurements. These structural choices translate into measurable benefits: fewer discarded parts, less time spent on repositioning, and improved data quality in small-series production and toolroom tasks. The design balances rigidity and compact footprint for everyday metrology needs. Workflow integration and workshop benefits Engineered for practical bench use, the device accepts standard indicator fittings and fits easily into inspection stations or alongside machine tools. The fine adjustment feature eases the alignment of measuring probes to narrow grooves or small bores, while the compact footprint keeps valuable bench space free. Supplied by Microtech Metrology, the unit is tailored to users who prioritise dependable setup and swift changeovers; it supports routine checks, go/no‑go comparisons and setup verification with minimal additional tooling. Clear mechanical design reduces user training time and simplifies daily operation. For tailored purchasing or technical clarification, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge provides product advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 161002020 GTIN: 4061905456619 Manufacturer: Microtech Metrology eClass: 21170604 Core specifications Base dimensions: 149 × 90 × 30 mm Measuring table: Ø60 mm Column: Ø22 × 180 mm Mounting / receptacle: 8 Fine adjustment: yes Special features Fine-adjustment spindle for precise positioning Designed for dial gauges / dial indicators Compact footprint for bench integration Rigid column for repeatable setups FAQ What indicator types fit the stand? The stand accepts standard dial gauges and dial indicators; the mounting receptacle is listed as 8 and accommodates common indicator stems for secure fastening. Is this product supplied ready for use straight away? The Microtech Metrology dial gauge stand is delivered as a ready-to-install fixture and includes the mechanical fine-adjustment feature for immediate integration into inspection stations. Can the stand be used for comparative measurements on a production bench? Yes, the combination of a Ø60 mm measuring table and a rigid Ø22 × 180 mm column makes the stand suitable for repeatable comparative and setup measurements in small-series production. Does the stand require any special mounting or clamping? No specialised clamping is required; the compact base and standard mounting interface enable secure bench placement and straightforward attachment of dial indicators. Which benefits does the fine adjustment provide in daily use? The fine adjustment allows controlled micro-movements, improving alignment accuracy and reducing the risk of overshoot when positioning probes for tight features. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision and flexibility with measurement tables with superstructure
Measurement tables with superstructure combine a high-precision baseplate and an integrated mechanical frame to deliver stable, repeatable inspection conditions. Also referred to as measuring tables, inspection tables or test benches, these systems are designed for serial quality control, laboratory setups and demanding B2B metrology tasks.
How the system supports complex inspection and testing
These measurement tables with superstructure are used as stationary test stands where absolute stability and configurability are essential. A precision-lapped granit base plate provides the flat, vibration‑damped foundation, while a rigid column or stative is fixed to the base to carry dial gauges, lever indicators or electronic probes. For fixture and jig construction, the plates are supplied with M8 threaded holes and T-slots, enabling secure and repeatable attachment of clamping elements, stops and prisms. Multiaxis or multi-station arrangements are supported by modular components, permitting parallel coordination of several measuring axes.
Measurable gains for production and test labs
These systems deliver concrete efficiency and quality benefits for everyday workshop and metrology work:
- Significantly reduced measurement error thanks to the granit base plate and rigid superstructure, which minimise vibration and bending.
- Faster setup and changeover through standardised M8 threaded holes and T-slots, shortening fixture time and increasing throughput.
- Improved repeatability for serial inspection by fixing instruments such as dial gauges and electronic probes to a stable reference.
- Flexible adaptation to customer-specific requirements via customised drilling patterns and modular uprights, enabling tailored test rigs.
Why Metav is the practical partner for your metrology needs
Metav supplies a comprehensive range of measurement tables with superstructure and complementary accessories, backed by decades of precision expertise. From Emmerich, Metav operates as a quality filter for the European market: over 48,000 customers trust the company, and a catalogue of more than 250,000 products reduces supplier complexity for industry and trade. This combination of deep product range and dependable logistics makes Metav a pragmatic choice for workshop managers and metrology engineers seeking robust, configurable test benches.
In short: stable, modular measuring tables for consistent results
Measurement tables with superstructure provide a stable metrological foundation and modularity that together ensure repeatable, process‑secure inspection results for serial production and complex laboratory setups.
FAQ
What makes a measurement table with superstructure more stable than a standard workbench?
A measurement table with superstructure uses a precision-lapped granit base plate and a rigid, permanently mounted column or frame, which together damp vibrations and prevent the displacement or bending that commonly affects standard workbenches.
Can these measurement tables be adapted to custom fixtures?
Yes. The measuring tables are designed with M8 threaded holes and T-slots to accept bespoke clamping elements, prisms and stops, allowing quick and precise reconfiguration for customer‑specific test setups.
Which measuring instruments can be mounted on the superstructure?
Typical instruments mounted on the superstructure include dial gauges, lever indicators and electronic probes; the rigid assembly ensures that instrument readings remain repeatable across multiple test cycles.
Are these tables suitable for multi-station inspection?
Measurement tables with superstructure are well suited to multi-station and multiaxis inspection tasks, as modular components permit parallel coordination of several measuring axes and multi‑device setups.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com