Ausstattungen für Fräsmaschinen

Take advantage of a compact, workshop-ready accessory that combines simple handling with precise compatibility for Vertex VEC machines — the slim design and exact fit reduce changeover time and support reliable cutting processes. Order the part directly via Metav Werkzeuge or consult the Metav team for confirmation of suitability. VEC-600G-C — Vertex cutting wheel, compatible with VEC series, 60 g The VEC-600G-C is a dedicated cutting wheel accessory for Vertex VEC cutting and grinding machines, intended to deliver consistent sectioning performance in industrial and trade workshop applications. Cutting wheel for VEC series machines Compatible with VEC-600G model Lightweight 60 g for easy handling SKU VEC-600G-C, GTIN 4061905095368 Precise replacement for routine cutting tasks A compact cutting wheel designed as a direct accessory for the VEC family improves repeatability in daily workshop operations. The slim profile and modest mass help to reduce handling time during wheel changes, while the defined fit to the VEC series supports straightforward mounting. By specifying a part matched to the original machine series, downtime is minimised and process consistency is maintained through a replacement that aligns with the original equipment’s mounting and rotational characteristics. This contributes to a predictable production flow and lower cycle interruptions. Compatibility-focused design that simplifies maintenance Compatibility is a central feature: this accessory is listed as suitable for the VEC-600G and integrates with the VEC cutting and grinding platform. The modest weight of 0.06 kg (60 g) assists quick manual replacement and safer handling at the bench. The SKU and GTIN are provided to ensure the correct ordering and stock control procedures are followed, streamlining procurement and inventory management. For maintenance planners, a standardised part like this reduces the variety of spares required and aids faster turnaround during servicing. Support for efficient workshop logistics and quality assurance Choosing a branded spare that matches the machine family helps to maintain machine performance and supports consistent end results. Sourcing through an established distributor ensures traceability and reliability in supply. Metav’s role as a precision partner offers a consolidated procurement route for workshop consumables and accessories, helping to centralise orders and maintain stock continuity. The combination of targeted compatibility and lightweight handling makes this accessory a pragmatic component for routine replacements and scheduled maintenance cycles. For secure supply of Vertex cutting accessories, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or phone +49 2822 7131930 to confirm suitability for the VEC-600G and place an order Technical data SKU: VEC-600G-C GTIN: 4061905095368 Manufacturer: Vertex Facts Weight: 0.06 kg eClass: 21069101 Features Type: Cutting wheel (accessory for cutting and grinding machine VEC) Compatible with VEC-600G Category: Vertex FAQ Is this accessory compatible with the VEC-600G cutting and grinding machine? Yes. The VEC-600G-C is specified as compatible with the VEC-600G and is intended as an accessory for the VEC cutting and grinding series. What is the weight of the cutting wheel and how does that affect handling? The part weighs 0.06 kg (60 g); its low mass supports quicker manual handling and easier replacement during routine maintenance. How is the product identified for ordering and stock control? Identification is via SKU VEC-600G-C and GTIN 4061905095368 to ensure accurate procurement and inventory tracking. Can this wheel be used on other makes or models of machines? The wheel is listed for the VEC series, specifically the VEC-600G; compatibility with other machines has not been specified in the available product data and should be verified against the target machine’s mounting specifications. What information about materials or coatings is available for this accessory? Material and coating details are not specified in the provided product data; consult the technical datasheet or supplier documentation for further specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Technische Daten: Bezeichnung: LED-Lampe Vollhartmetall IP-Schutz: IP 20 Gewicht: 1,2 kg - 2 kg Winkel: 24° Arm: 220x310mm bis 500mm Leistung: 110V/220V - 220V Lichttemperatur: 6500 K Licht: 12V/6W Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.

Take advantage of the proven compatibility with the VHL halogen lamp, the easy handling provided by a 0.6 kg weight and the traceability via GTIN for reliable procurement. Order or request advice directly from Metav Werkzeuge if further clarification is required. J-M01 — Accessory for VHL halogen lamp, lightweight, Vertex J-M01 is an accessory intended for use with the VHL halogen lamp, supplying a compatible component for existing halogen lighting assemblies. Accessory for VHL halogen lamp Lightweight 0.6 kg Manufacturer: Vertex Ensured compatibility for consistent lighting performance The accessory offers clear compatibility with the VHL halogen lamp, providing a straightforward replacement or spare-part option that maintains system consistency. By matching the lamp family and connection intent, the component supports uninterrupted operation of lighting assemblies and simplifies parts management. Traceability is supported through the visible GTIN: 4061905093982, which aids stock control and supplier verification while reducing procurement errors. Easier handling and reduced handling effort thanks to low weight With a net weight of 0.6 kg, the item is notably lightweight, which translates into simpler handling during installation and replacement. The reduced mass lowers manual strain when changing components in confined or elevated workspaces and can accelerate routine maintenance tasks. This practical benefit contributes to smoother workflows in workshops and production areas that use halogen illumination. Clear provenance and dependable sourcing via recognised partners Produced by Vertex, the accessory is identifiable for procurement and inventory purposes, allowing precise ordering and quality tracking. The SKU J-M01 and the associated GTIN support accurate documentation and compatibility checks. Metav Werkzeuge complements this by offering an established European supply channel; Metav’s role as a quality filter from Emmerich, combined with its broad product range and long-standing customer trust, underpins reliable delivery and repeatable sourcing for industrial users. Contact Metav Werkzeuge to confirm compatibility and secure the J-M01 accessory for VHL halogen lamps from our stock and to receive tailored advice on integration. Technical Data Article number: J-M01 GTIN: 4061905093982 Manufacturer: Vertex eClass: 27110390 Facts Weight: 0.6 kg GTIN: 4061905093982 eClass: 27110390 Applications & Features Application: accessory for VHL halogen lamp Category: Accessory SKU: J-M01 FAQ Is this accessory compatible with the VHL halogen lamp range? Yes. The J-M01 accessory is specified for the VHL halogen lamp family and is intended as a compatible component for those lamp assemblies. What is the weight of the accessory? The accessory weighs 0.6 kg, which keeps handling and replacement straightforward in workshop and production settings. How can the authenticity of the part be verified? Check the GTIN 4061905093982 and the SKU J-M01; both identifiers confirm the part as the Vertex accessory for VHL halogen lamps. Who manufactures this accessory? Vertex is the manufacturer of the J-M01 accessory, produced and distributed under the Vertex brand for halogen lamp applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a waterproof lighthead and a compact single-joint arm combined with dual-voltage compatibility for flexible installation and dependable inspection lighting. Order the VHL-500S directly via Metav Werkzeuge or consult our advisors for specification guidance. VHL-500S Industrial Inspection Lamp — Waterproof head, single-joint arm (Vertex) The VHL-500S is an industrial inspection lamp designed for wet environments and precise positioning, suitable for assembly benches, inspection stations and machine-mounted lighting. Waterproof light head (IP67) Arm protected to IP65 Selectable halogen or LED light source Single-joint arm for precise positioning Reliable illumination where precision matters The VHL-500S combines a waterproof lighthead rated IP67 with an arm protected to IP65, delivering consistent illumination even in dusty or spray-prone environments. This construction reduces downtime caused by lighting failures and supports continuous inspection tasks. The robust enclosure and compact mass ensure the unit remains stable once set, contributing to a consistent visual reference for measurement and assembly operations. The rugged design is aimed at industrial settings requiring dependable, localised lighting. Flexible electrical compatibility and lamp options Equipped for 110V/220V supply systems and specified for halogen bulbs at 12V/50W–24V/50W, the lamp adapts to common workshop installations without elaborate rewiring. The option for halogen or LED illumination allows a choice between traditional colour rendering and the energy efficiency of modern LEDs where retrofit modules are applied. The single-joint articulation provides repeatable positioning, simplifying tasks that demand the same lighting angle repeatedly, while the overall weight keeps the fixture manageable for retrofits and maintenance. Built for inspection and workshop workflows As an inspection lamp from Vertex, the VHL-500S focuses on practical benefits: robust ingress protection for reliable use near coolant or cleaning processes, precise alignment through its articulated arm, and compatibility with standard workshop voltages. These attributes result in fewer interruptions and a clearer visual assessment of components during quality checks. The lamp is tailored to support measurement and assembly routines where consistent illumination improves error detection and work quality. Choose the VHL-500S from Metav Werkzeuge for dependable, workshop-ready inspection lighting and contact our team in Emmerich for specification advice and supply logistics Technical data SKU: VHL-500S GTIN: 4061905094538 Weight: 2.7 kg Protection: Light IP67 / Arm IP65 Power supply: 110V/220V Light specification: 12V/50W–24V/50W (Halogen) Arm: 1 joint eCl@ss: 27110640 ETIM: EC001959 Facts Voltage compatibility 110V and 220V Halogen lamp rating 50 W Weight 2.7 kg Ingress protection IP67 / IP65 Special features Waterproof lighthead Arm protected to IP65 Halogen or LED lighting options Compact single-joint articulation Designed for industrial inspection tasks FAQ What environments is this lamp suitable for? The VHL-500S is designed for industrial inspection zones where splashing or dust is present; the lighthead is IP67 rated while the arm meets IP65 protection. Can the lamp be used with standard workshop voltages? Yes. The VHL-500S supports 110V/220V mains supplies and is specified for halogen elements at 12V/50W–24V/50W. Is the articulation suited to repeated positioning? The single-joint arm provides stable, repeatable positioning, making the lamp suitable for tasks that require consistent illumination angles. Does the VHL-500S accept LED modules? The model is offered with halogen as standard; LED conversions can be applied where compatible modules are available to benefit from lower power consumption and longer life. Who manufactures this product? Vertex is the manufacturer of the VHL-500S inspection lamp; the unit is produced to industrial protection and electrical standards for workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Hardened L-profile jaws tailored for VQC vises provide robust, repeatable clamping and improved part stability; the compact 124.5×74×40 mm format and balanced mass support steady machining operations. Order the VQC-125MJL directly via Metav Werkzeuge or consult Metav’s specialists for specification clarification. VQC-125MJL Hardened L-jaws for VQC vises, 124.5×74×40 mm — Vertex The VQC-125MJL hardened L-jaws are a purpose-designed clamping accessory for VQC vises, enabling profile-contact support for small to medium workpieces in workshop and light production settings. Hardened L-profile for durable contact Precision fit for VQC vises Compact dimensions 124.5×74×40 mm Stable clamping, weight 2.02 kg Greater repeatability through hardened contact geometry The hardened L-profile delivers a defined contact surface that reduces deformation under load and preserves clamping geometry over extended use. By combining a rigid profile with a considered mass distribution, these jaws support repeatable positioning and minimise the need for frequent readjustment. The result is fewer set-up cycles and more consistent output when the jaws are paired with a VQC series vice. Compact footprint that improves accessibility and rigidity With overall dimensions of 124.5 × 74 × 40 mm, the design provides a low-profile contact that keeps the clamping point close to the machine table or vice base, improving rigidity and reducing lever forces on the workpiece. The modest mass of 2.02 kg contributes to stability while remaining manageable for fast changeovers. This combination suits applications where both accessibility and secure support are required, for example finishing, drilling and light milling tasks. Practical integration and workshop benefits The geometry and mounting interface are optimised for direct replacement on VQC vises, ensuring a clean fit and straightforward installation. These jaws are intended as a durable clamping aid that complements standard vice operation, reducing vibration transmission and supporting clean, predictable machining results. Specified dimensions and balanced weight make them easy to handle during tool changes while preserving the precision expected in production environments. Choose Vertex quality: order the VQC-125MJL via Metav Werkzeuge for reliable supply from Emmerich and benefit from fast specialist advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VQC-125MJL GTIN: 4061905087677 Brand: Vertex Facts Dimensions: 124.5 x 74 x 40 mm Weight: 2.02 kg SKU: VQC-125MJL Special features Hardened L-profile for extended service life Designed for use with VQC vises Compact format for improved accessibility FAQ What is the primary advantage of these L-jaws? The hardened profile provides durable, repeatable contact that improves clamping stability and reduces deformation during machining with the VQC series vises. Are these jaws compatible with all VQC vise sizes? The VQC-125MJL is designed specifically for VQC vises; compatibility should be confirmed against the vice model and mounting pattern. What are the exact dimensions and weight? Dimensions are 124.5 × 74 × 40 mm and the mass is 2.02 kg, details that assist with set-up planning and fixture design. Is the material specification listed for the jaws? The product data provided does not include a material field; the item is described as hardened, and further material specifics can be obtained from the manufacturer or Metav’s technical documentation. Can these jaws be used for milling and drilling operations? Yes, the profile and rigidity make them suitable for drilling and light milling tasks where profile contact and stable support are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of hardened clamping surfaces, a precision fit for VQC vises, and compact dimensions to ensure stable, repeatable workholding and reduced setup times. Order the jaws directly via Metav Werkzeuge or contact our consultants for application advice. Hard L-jaws for VQC vises by Vertex — hardened replacement jaws, compact 159.5 x 86 x 50 mm Hard L-jaws for VQC vises are hardened replacement jaws designed to deliver reliable clamping for machining and workshop applications with VQC vises Hardened design for durable clamping Precision-machined fit for VQC vises Compact dimensions: 159.5 x 86 x 50 mm Weight approx. 3.86 kg for robust handling Consistent clamping through hardened construction The hardened jaw geometry provides a wear-resistant contact surface that preserves jaw profile under repeated load, supporting consistent clamping force and longer service intervals. Designed as a direct replacement for VQC vises, the component reduces the need for frequent regrinding and maintains part accuracy across batches. The combination of a wear-hardened face and a stable seating interface translates into fewer interruptions for maintenance and a lower total cost of ownership in production environments. Precision fit reduces setup time and runout A precision-machined seating and contact area ensure accurate alignment with the VQC vise body, which helps to minimise runout and misclamping during milling or drilling operations. The close fit between jaw and vise body improves repeatability when reattaching the jaws, enabling faster set-ups and more reliable tolerances. This precise interface is particularly valuable in small-batch production or prototyping where every clamping iteration affects final part quality. Compact dimensions for versatile workshop use With external dimensions of 159.5 x 86 x 50 mm, these L-jaws suit compact and mid-size vises where space is at a premium but secure clamping is still required. The relatively modest footprint allows integration into fixtures and machines without extensive modification, making the jaws suitable for a range of workshop layouts. The modest mass of 3.86 kg contributes to stable handling while remaining manageable for routine installation and replacement. Practical benefits for everyday machining As hardened replacement jaws, the component is intended for straightforward installation and durable daily use. The robust contact faces assist in protecting workpiece surfaces during clamping and reduce the tendency for slippage under moderate to high clamping forces. Where repeat accuracy and durability are priorities, the hardened L-jaws provide an efficient, low-complexity solution that helps maintain throughput without frequent jaw change-outs. Contact Metav Werkzeuge in Emmerich for specification checks and to secure Vertex hardened L-jaws for your VQC vises — our consultants will advise on fitment and delivery from our European warehouse Technical Data Article number: VQC-160L-MJL GTIN: 4061905089169 ECLASS: 21029107 Dimensions: 159.5 x 86 x 50 mm Weight: 3.86 kg Designation: Hard L-jaws Application: for VQC vises Manufacturer: Vertex FAQ Are these jaws compatible with all VQC vise models? Compatibility is intended for VQC vises; check the seating dimensions and SKU VQC-160L-MJL to confirm fit for the specific model. What material are the jaws made from and are they hardened? The jaws are supplied as hardened L-jaws with wear-resistant contact faces designed for extended service life in machining applications. How does the compact size affect usability? The compact 159.5 x 86 x 50 mm form factor allows integration in confined setups while delivering stable clamping suitable for many workshop tasks. Can the jaws be used for precision work without additional dressing? The precision-machined seating ensures good repeatability; for ultra-fine tolerances, verification after installation is recommended. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of adjustable stroke rates and a robust 150 kg construction to secure steady, repeatable production; the combination of selectable 140 spm / 160 spm settings and precision design supports consistent throughput and low-vibration operation. Order the Precision Ram Head VSH-125 directly via Metav Werkzeuge or ask our consultants if technical clarification is needed. Precision Ram Head VSH-125 by Vertex — selectable 140/160 spm, five-stage control The VSH-125 Precision Ram Head is a compact, heavy-duty module engineered for use on presses and impact machines where controlled stroke rate and reproducible force cycles are essential Selectable 140 or 160 spm in five stages Robust 150 kg assembly for reduced vibration Designed for precision repeatability and long service life *Suitable for integration into production presses Match production speed to process requirements with selectable stroke rates The unit offers two nominal stroke frequencies, 140 spm and 160 spm, selectable across five discrete stages, enabling straightforward adaptation of cycle speed to the task at hand. In this context, spm denotes strokes per minute, a direct measure of throughput; choosing the correct stage reduces cycle time without compromising process control. The stepwise selection simplifies setup, so line engineers can align the ram’s rhythm with forming or assembly operations and maintain a predictable production tempo. Heavy construction that stabilises operation and improves repeatability Weighing 150 kg, the assembly provides a mass that helps damp dynamic forces and stabilise the kinematics of the ram. This robust construction reduces the amplitude of vibration during impact cycles, which in turn supports higher dimensional consistency of produced parts and lowers the risk of progressive wear. For workshops requiring dependable cycle-to-cycle accuracy, the design contributes to sustained repeatability and predictable maintenance intervals. Integration-friendly design and dependable supply chain backing The module’s compact format and clear performance range facilitate mechanical integration into existing press frames or specialised impact machinery. Combined with Metav Werkzeuge’s role as a European quality filter and logistics hub, procurement is simplified: stock availability from Emmerich and a centralised parts offering reduce lead times. Metav’s decades of precision experience and wide product range support a reliable supply and make replacement planning straightforward, while technical documentation and imagery assist in compatibility checks prior to installation. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VSH-125 into production lines and to confirm availability from our Emmerich stock Technical data Article number: VSH-125 GTIN: 4061905084737 Manufacturer: Vertex Facts Weight: 150 kg Speed: 140 spm or 160 spm, selectable in 5 stages ECLASS: 36600490 Special features SKU: VSH-125 Images: main and detail available Category: Vertex FAQ What stroke rates can be set on this ram head? The unit provides selectable stroke frequencies of 140 spm or 160 spm, adjustable across five discrete stages to match production requirements. How heavy is the assembly and what does that mean for operation? The assembly weighs 150 kg; the substantial mass helps damp vibration and supports improved cycle-to-cycle repeatability when integrated into press machinery. Is the unit suitable for integration into existing press frames? The design of the VSH-125 is intended for integration with presses and impact machines where controlled stroke rates and precision cycles are required; mechanical compatibility should be confirmed against the host machine’s mounting and drive interface. Which identifiers and codes are available for ordering or cataloguing? Relevant identifiers: SKU VSH-125 and GTIN 4061905084737; ECLASS code 36600490 is provided for classification. Who manufactures this ram head and where is it supplied from? This product is manufactured by Vertex and is supplied via Metav Werkzeuge’s European distribution, with stock and logistical support from Emmerich. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a robust Flange B accessory that delivers stable mounting and reliable integration with precision slotting heads; the solid 23 kg construction supports consistent machining results. Order this component directly via Metav Werkzeuge or consult the Metav team for application guidance. Accessory for Precision Slotting Head (Flange B) – Vertex VSH-FGB The Accessory for Precision Slotting Head provides a robust Flange B connection for industrial slotting applications, designed to improve mounting stability and repeatability. Flange B for precision slotting heads Solid construction, 23 kg mass Easy integration with Vertex systems Identified SKU VSH-FGB for ordering Improved repeatability through stable mounting A secure mounting interface reduces variability at the spindle and tool interface. The Flange B design gives a stable mechanical link to a precision slotting head, which translates into fewer alignment adjustments and more predictable machining cycles. For production contexts where part-to-part consistency matters, this accessory supports cleaner process control and reduced rework. The weight and mass distribution contribute to vibration damping, helping to maintain tool position under cutting loads and promoting better surface finish on processed components. Built for continuous workshop use and dependability Durability and low-maintenance operation are primary concerns in industrial environments. The accessory’s solid construction and industrial-grade build quality are intended to withstand repeated mounting and mechanical stress over long production runs. This leads to less downtime for component replacement and a lower total cost of ownership through extended service intervals. As a Vertex-branded component, it aligns with established manufacturing standards and supports robust production workflows without unnecessary complexity. Clear identification and straightforward integration Procurement and system integration are simplified by clear identification and standardised interfaces. The item is listed under SKU VSH-FGB, which facilitates ordering and inventory management, while the Flange B interface supports standardised attachment to compatible slotting heads. Technical teams benefit from simple, repeatable installation procedures, and production planners gain the reassurance of a defined component for BOMs and machine retrofits. Metav’s role as a local quality filter in Europe further ensures transparent delivery and reliable stock handling for industrial buyers. Contact Metav Werkzeuge to confirm compatibility with existing slotting heads and to request the Vertex VSH-FGB specification for your production setup Technical data Article number: VSH-FGB GTIN: 4061905088186 Manufacturer: Vertex Machinery Works Co., Ltd. Type: Flange B Category: Accessory for precision slotting head Weight: 23 kg Eclass: 21040713 Facts Weight: 23 kg GTIN: 4061905088186 Eclass number: 21040713 Special features Type: Flange B Application: for precision slotting head SKU: VSH-FGB Brand: Vertex FAQ What is the primary function of this accessory? The accessory is designed as a Flange B mounting component for precision slotting heads, providing a stable mechanical interface to improve repeatability and reduce alignment effort. Is the accessory compatible with standard slotting heads? Compatibility is based on the Flange B interface and the mounting specifications of the slotting head; the VSH-FGB by Vertex is intended for use with precision slotting heads that accept a Flange B connection. How heavy is the unit and why does that matter? The unit weighs 23 kg; the added mass helps with vibration damping and contributes to a firmer, more stable mounting during machining operations, which can improve surface finish and process consistency. What regular checks are recommended to maintain performance? Periodic inspection of mounting bolts, interface faces and the seating condition is advised to ensure continued alignment and secure fastening; routine checks support long-term stability and safe operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable mechanical lifting and a flexible selection of sizes make this set a practical addition to workshop equipment; the compact 7.5 kg total weight supports easy handling and storage. Order the set directly via Metav Werkzeuge or consult our advisors for application-specific guidance. VSJ-B screw jack set by Vertex — compact, versatile workshop lifting elements A VSJ-B screw jack set designed for mechanical lifting and precise positioning tasks in workshop and fixture applications Comprehensive set with multiple VSJ sizes Robust mechanical lifting elements Compact total weight of 7.5 kg Ideal for workshop positioning tasks Engineered for dependable mechanical lifting and positioning The screw jack set offers a straightforward mechanical solution where controlled linear movement and stable support are required. Built with practical workshop use in mind, the set combines simple mechanics with precision that reduces reliance on complex electronics. Designed primarily for repeated adjustment and load transfer tasks, these components provide reliable operation under routine industrial conditions. The combination of durable construction and consistent function supports efficient process workflows and reduces unplanned downtime in production and assembly settings. A complete selection of compatible jack sizes for varied tasks Delivered as a set, the contents include VSJ-150A, VSJ-250A and the smaller units VSJ-1A–6A, enabling selection of the right jack for each lifting or positioning requirement. This arrangement supports flexible use across jigs, fixturing and alignment operations where different stroke lengths or mechanical advantages are needed. Having multiple sizes in one package simplifies inventory management and speeds up set-up, while the assortment helps avoid frequent procurement of individual units for varied projects. Practical integration, easy handling and maintenance With a total package weight of 7.5 kg, handling and storage are kept efficient without compromising robustness. The mechanical design favours straightforward integration into existing assemblies or test stands, with common mounting approaches and predictable behaviour under load. Supplied as a coordinated set, the units are suited to retrofits, prototype builds and production tooling alike. For buyers seeking a trusted supply chain, Metav Werkzeuge offers warehousing and distribution across Europe, ensuring dependable availability and a transparent logistics process. Contact Metav Werkzeuge in Emmerich for application advice and to request the Vertex VSJ-B specification — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VSJ-B GTIN: 4061905094040 Manufacturer: Vertex Facts Total weight: 7.5 kg Pieces per set: 10 ECLASS: 21044290 Special features Product type: screw jack set Set contents: 2× VSJ-150A, 2× VSJ-250A, VSJ-1A/2A/3A/4A/5A/6A Supplied as a set (satz: true) FAQ What is included in the set? The set contains two VSJ-150A, two VSJ-250A and units VSJ-1A through VSJ-6A as listed in the product contents for the VSJ-B screw jack set Which applications suit these screw jacks? These screw jacks are suitable for workshop lifting, positioning and fixture applications where mechanical linear movement and stable element support are required What is the total weight of the package? The complete set has a total weight of 7.5 kg Who manufactures the VSJ-B set? The VSJ-B set is manufactured by Vertex and supplied through Metav Werkzeuge Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise prismatic clamping, a compact lightweight design and clear identification for efficient workshop workflows; order the prism jaw attachment directly via Metav Werkzeuge or consult our advisors if required. Prism jaw attachment VWS-VW-4 — precision prism profile, compact and traceable The Prism jaw attachment VWS-VW-4 is a specialist clamping aid designed to secure cylindrical workpieces with a prismatic contact geometry for reliable holding in machining and inspection setups. Precision prism profile for secure clamping Lightweight: 0.36 kg for easy handling SKU VWS-VW-4 for straightforward identification GTIN 4061905086779 for full traceability Secure clamping for cylindrical components: consistent grip, reduced distortion The prismatic contact geometry provides a deliberately shaped seating that aligns and supports round and cylindrical parts, converting radial forces into stable contact and thereby reducing part deformation during clamping. This characteristic results in improved repeatability and fewer setup adjustments, which is particularly valuable when handling turned shafts, pins or assemblies that require axial stability. The compact construction and the lightweight 0.36 kg mass make positioning and reconfiguration straightforward on the shop floor, while the precision profile simplifies alignment for subsequent operations. Increased efficiency through reliable handling and faster set-up A prismatic jaw reduces the need for additional supports or fixtures by offering an immediate seating surface tailored to cylindrical geometries, which shortens preparation time and minimises machine idle periods. The measured approach to clamping delivers a clear efficiency gain: stable workholding lowers scrap risk and reduces rework, contributing to smoother process flow. For production environments where changeovers are frequent, the clear identification and repeatable interface accelerate part change routines and support productivity targets. Clear identification and traceability to support quality systems The component is provided with the designation VWS-VW-4 and a GTIN for seamless documentation within inventory and quality-management systems. Marking and catalogue references help integrate the attachment into existing tooling lists and maintenance schedules, supporting traceability and audit requirements. This clarity aids procurement and toolroom workflows by ensuring the correct item is selected and recorded for recurring tasks or maintenance checks. Supply assurance and partnership benefits for workshops and industry Sourced from Vertex and distributed through Metav Werkzeuge, the item benefits from a distribution network oriented to consistent supply and workshop needs. Metav’s position as a precision partner offers customers transparency of stock and a centralised source for complementary products and accessories, helping to reduce vendor count and simplify logistics. The combined emphasis on dependable product identification and straightforward handling underpins a practical approach to maintaining uptime and consistent quality in everyday machining tasks. Choose the Vertex VWS-VW-4 prism jaw attachment via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for ordering and technical clarification to secure precise, traceable clamping for your workshop. Technical data Article number: VWS-VW-4 GTIN: 4061905086779 Manufacturer: Vertex Weight: 0.36 kg Data ECLASS: 21029205 Weight (kg): 0.36 Special features Prismatic jaw profile for cylindrical clamping SKU: VWS-VW-4 Image available: vws-vl-4-detail.jpg FAQ What is the primary function of this prism jaw attachment? The prism jaw attachment VWS-VW-4 provides a prismatic seating surface designed to hold round and cylindrical workpieces securely for machining and inspection tasks. Is the VWS-VW-4 suitable for use in production changeovers? Yes, the compact design and clear identification (SKU VWS-VW-4, GTIN 4061905086779) support rapid reconfiguration and inventory control in production environments. How does the prismatic profile benefit part accuracy? The prismatic geometry aligns cylindrical parts and spreads clamping forces to reduce distortion, improving repeatability and reducing the need for corrective machining. Who manufactures this attachment and how is it identified for ordering? The attachment is manufactured by Vertex and is identified by article number VWS-VW-4 and GTIN 4061905086779 for procurement and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of consistent clamping accuracy, compact, lightweight design, and durable machining for reliable workholding. Order the VWS-VQS-4 directly via Metav Werkzeuge or consult our advisors for compatibility and delivery options. Prismatic Jaw Attachment VWS-VQS-4 by Vertex — prismatic V-profile, precision-machined The Prismatic Jaw Attachment VWS-VQS-4 is a prismatic V-profile clamping jaw designed for precision workholding in machining and inspection setups, providing stable support for cylindrical and round components. Prismatic V-profile for secure clamping Compact, lightweight design at 0.42 kg Compatible with standard vice jaws Precision-machined for repeatable positioning Secure, vibration-resistant clamping for round parts The prismatic design delivers a defined seating surface that centres rods and shafts reliably, reducing the need for secondary fixtures. Machined tolerances and a prismatic V-profile ensure consistent contact lines across the clamping surface, which improves repeatability and reduces set-up time in series operations. Where stability under cutting forces is required, the geometry of the jaw minimises lateral movement and supports efficient material removal with controlled vibration. Small footprint, easy integration into workholding systems With a compact, lightweight construction weighing 0.42 kg, the attachment is simple to handle and position, enabling fast changeovers in busy shop environments. The modest mass reduces inertia when reorienting setups or exchanging jaws, while the robust machining offers a balance between portability and durability. This combination supports workflow efficiency in both maintenance benches and production cells, particularly where space optimisation matters. Precision machining that supports quality assurance Manufactured to consistent standards, the component supports repeatable inspection and machining processes by providing a stable datum for components. The accessory is particularly useful where concentricity and axial alignment are critical; the prismatic contact translates directly into measurable improvements in part acceptance rates. As a Vertex component, the unit benefits from established manufacturing procedures that prioritise dimensional accuracy and surface finish, supporting traceable quality in production. Contact Metav Werkzeuge for tailored advice, stock status and delivery details on the Vertex Prismatic Jaw Attachment VWS-VQS-4 — supplied from Emmerich with technical guidance available. Technical data Article number: VWS-VQS-4 GTIN: 4061905088759 Manufacturer: Vertex Facts Weight: 0.42 kg ECLASS: 21029205 ETIM: EC001959 Special features Prismatic jaw (V-profile) Precision-machined surface SKU/UID: VWS-VQS-4 / VWS-VQS-4 Images available (main and detail) FAQ What is the main application of the prismatic jaw attachment? The prismatic jaw attachment is intended for secure clamping and centring of cylindrical and round components in machining and inspection setups, improving stability during operations. Is the Vertex VWS-VQS-4 suitable for production line changeovers? Yes, the Vertex VWS-VQS-4 has a compact design and low mass that support rapid changeovers and easier handling in production environments. How does the prismatic V-profile improve repeatability? The prismatic V-profile creates defined seating lines that centre parts consistently, which enhances repeatability and reduces variation between setups when using the same datum. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise, repeatable clamping and a compact footprint — the prism jaw delivers stable support for round components while remaining easy to handle at just 0.96 kg. Order the prism jaw attachment directly via Metav Werkzeuge or ask our consultants for application advice. Prism Jaw Attachment VWS-VA-6 — Vertex prism jaw for precision clamping The Prism Jaw Attachment VWS-VA-6 is a specialised clamping accessory intended to secure cylindrical and round workpieces for machining, inspection and fixture tasks. Precision clamping for cylindrical parts Lightweight at 0.96 kg for easy handling Vertex quality and traceable SKU VWS-VA-6 Consistent precision for cylindrical components The prismatic design ensures stable support and accurate axial alignment when holding round parts, reducing vibration and runout during machining. By converting curved surfaces into defined contact points, the device improves repeatability in serial production and inspection tasks. The compact accessory is aimed at workbench vices and fixture systems where consistent clamping geometry directly affects part quality and downstream processes. Faster setup and smoother workflow at the bench With a low mass and straightforward interface, the attachment shortens changeover times and simplifies handling during batch work or prototype runs. The reduced handling effort contributes to operational efficiency and fewer interruptions on the shop floor, while the straightforward form factor supports tidy jig layouts. The result is tangible productivity gains through reduced setup time and a more reliable workholding regime. Traceability, brand assurance and supply continuity Supplied by Vertex, the accessory is listed under SKU VWS-VA-6 and identifiable by GTIN 4061905089572, which supports documentation and inventory processes. Partnering with Metav Werkzeuge provides additional assurance: Metav acts as a quality filter for the European market, combining decades of experience, a broad product range and dependable logistics from Emmerich. This combination supports consistent procurement, stock transparency and easier compliance with internal quality systems. Contact Metav Werkzeuge in Emmerich for compatibility checks or to request application guidance on the Vertex prism jaw attachment VWS-VA-6 — local stock and expert advice ensure reliable supply and fast technical clarification. Technical data Article name: Prism jaw attachment SKU: VWS-VA-6 GTIN: 4061905089572 Manufacturer: Vertex Facts Weight: 0.96 kg Classification: eClass 21029205 Design & features Product type: Prism jaw attachment Brand: Vertex Identifies as clamping accessory for cylindrical components Compact, bench-mount compatible accessory FAQ What workpieces is the prism jaw attachment suited for? The prism jaw attachment is intended for cylindrical and round components; the prismatic contact geometry provides stable support for such shapes during machining or inspection. How heavy is the Vertex VWS-VA-6 and does that affect handling? The VWS-VA-6 weighs 0.96 kg, which makes it easy to mount and reposition on bench vices or fixtures without requiring specialised lifting aids. Is the component traceable for inventory and quality systems? Yes — the accessory is listed under SKU VWS-VA-6 and GTIN 4061905089572, facilitating traceability and documentation in production or procurement systems. Can the prism jaw be integrated into existing vices and fixtures? The prism jaw attachment is designed as a clamping accessory for standard bench and fixture setups; consult Metav Werkzeuge for verification of compatibility with a specific vice or fixture system. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise cylindrical clamping, lightweight handling and clear article identification for efficient workshop operation. Order the Vertex prism jaw insert directly via Metav Werkzeuge or ask the consultants for technical advice. VWS Prism Jaw Insert VWS-VA-4 — precision prism profile for cylindrical workpieces VWS-VA-4 is a compact prism jaw insert designed to support secure and repeatable clamping of round components in workshop and light industrial settings. Precision prism profile for cylindrical parts Lightweight 0.4 kg for easy handling SKU VWS-VA-4 · GTIN 4061905088261 Consistent clamping for round components that reduces setup time The prism profile concentrates clamping forces evenly around cylindrical workpieces, reducing the risk of deformation and improving concentricity during machining or measuring tasks. As a dedicated prism jaw insert, the component provides repeatable positioning and controlled contact points, which supports tighter tolerances and fewer reworks. The design translates into measurable productivity gains where consistent round-part handling is required. Easy handling and quick integration into precision workflows At 0.4 kg, the insert is lightweight enough for frequent changes yet solid in feel, aiding fast tool changes and shorter fixture cycles. The compact form makes storage and handling straightforward, while the clearly marked SKU VWS-VA-4 and GTIN 4061905088261 simplify inventory management and procurement. Where small setup improvements matter, the combination of low mass and a defined prism geometry lowers handling time and contributes to an uninterrupted production flow. Reliability and supply backed by a specialised partner Sourcing this prism jaw insert through an experienced supplier ensures consistent quality and reliable delivery. Metav’s role as a European quality filter and long-standing precision partner brings both logistical reliability and product competence to the process. Choosing a recognised brand such as Vertex supports confidence in manufacturing standards and repeatability, which is essential for workshops and specialist distributors focused on measurable performance. Contact Metav Werkzeuge in Emmerich for a consultation on Vertex prism jaws and to request a tailored supply recommendation directly from the dealer Technical Data Article number: VWS-VA-4 GTIN: 4061905088261 ECLASS: 21029205 Facts Weight: 0.4 kg Special features Prism jaw insert For cylindrical workpieces Brand: Vertex FAQ What is the primary application of this prism jaw insert? The VWS prism jaw insert is intended for secure and repeatable clamping of cylindrical components during machining or inspection tasks. Can the insert be handled and changed frequently in a production environment? Yes, the lightweight design (0.4 kg) supports frequent changeovers and simplifies handling in busy workshop routines. How is the item identified for procurement and stock control? Identification is via SKU VWS-VA-4 and GTIN 4061905088261, which are provided for clear ordering and inventory management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision clamping, lightweight design (0.7 kg) and easy integration with the VWS series for reliable setups and consistent repeatability. Order the Prism attachment jaw VWS directly via Metav Werkzeuge or ask our consultants for application advice. Prism attachment jaw VWS — precision clamping for cylindrical workpieces Prism attachment jaw VWS is a compact clamping accessory designed to support accurate holding of round and cylindrical components in machining and inspection setups. Precision prism jaw for cylindrical clamping Lightweight design, only 0.7 kg Compact format for limited fixture space Compatible with VWS series accessories Secure, repeatable clamping for round components The prism jaw principle converts line contact into a secure three-point hold, reducing slippage and improving concentricity when working with shafts, rods or bar-stock. Thanks to its focused contact geometry, setup time is reduced while measurement and machining accuracy is maintained. The accessory is suited to tasks where consistent orientation and minimal rework are priorities, offering a practical solution for production and metrology environments where part repeatability matters. Compact design that improves workflow at the fixture With a lightweight construction of 0.7 kg, the attachment minimises added mass on the clamping station and simplifies handling during fixturing operations. The compact footprint supports dense tooling arrangements and the ability to position the jaw in tight spaces without compromising access for cutting tools or measuring probes. Less handling time and improved accessibility contribute to faster cycle times and a clearer workflow on the shop floor. Engineered for integration and dependable shop performance Produced under the Vertex designation and indexed as SKU VWS-VH-5, this prism attachment jaw is intended to complement the VWS product family, enabling straightforward integration into existing setups. The component classification (ECLASS 21029205) indicates suitability for standard clamping applications within industrial workflows. Attention to geometric precision in the jaw profile ensures stable seating of cylindrical parts, supporting consistent results across repeat operations and lowering the risk of part damage during clamping. Contact Metav Werkzeuge for specific compatibility details and to discuss how the Vertex Prism attachment jaw VWS can be integrated into existing fixturing solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VWS-VH-5 GTIN: 4061905093579 Manufacturer: Vertex Facts Weight: 0.7 kg ECLASS: 21029205 Special features Prism attachment jaw design Series: VWS SKU: VWS-VH-5 FAQ What is the weight of the prism attachment jaw? The prism attachment jaw VWS (SKU VWS-VH-5) has a weight of 0.7 kg. For which applications is this jaw intended? The prism jaw is intended for secure holding of round and cylindrical workpieces where accurate axial alignment and repeatability are required. Does this component belong to a series or system? Yes, the item is part of the VWS series and is designated as VWS-VH-5. Is the material information specified for the prism attachment jaw? Material information is not provided in the available product data for the Vertex prism attachment jaw VWS. Which classification applies to this product? The product is classified under ECLASS 21029205. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, high-precision clamping solution that combines reliable positioning and easy handling. The lightweight design (0.58 kg) supports quick set-ups and consistent repeatability during measurement and machining tasks. Order the prism jaw attachment directly via Metav Werkzeuge or ask our consultants if needed. Prism Jaw Attachment VWS — precision prism jaw, lightweight 0.58 kg (Vertex) The Prism Jaw Attachment VWS is a precision clamping accessory intended for industrial workholding and measurement applications, designed to simplify locating and securing cylindrical or rounded workpieces during machining and inspection tasks. Compact prism geometry for stable clamping Lightweight: 0.58 kg for easy handling Engineered for repeatable positioning Accurate locating for consistent process results The prism geometry provides a stable seat for round and cylindrical components, ensuring accurate locating and improved axial alignment in fixtures and measuring setups. By converting radial contact into a defined V-support, this attachment reduces positional variation and enables repeatable results across batches. The clear mechanical principle behind the design minimises adjustment time and helps maintain consistent tolerances in serial operations. Ease of handling reduces set-up time With a mass of 0.58 kg, the prism jaw attachment offers practical benefits for frequent tool changes and reconfigurations. The reduced weight simplifies manual handling and positioning, which contributes to faster set-ups and less operator fatigue in day-to-day workshop use. The compact format is advantageous where space is limited on machine beds or inspection fixtures, providing a neat solution without compromising functional stability. Integration into workshop workflows and quality routines The attachment is suitable as an add-on for standard clamping and measuring arrangements, supporting smoother throughput and more reliable inspection cycles. The simple principle of the prism seat means minimal training is required to achieve correct positioning, and the component supports traceable alignment procedures that feed into quality assurance documentation. Where process documentation is required, the use of a dedicated prism support helps standardise fixturing across operators and shifts. Proven brand and supply chain advantages Sourced from Vertex, the attachment benefits from established manufacturing and quality practices, making it a dependable choice for workshops seeking robust workholding solutions. Via Metav Werkzeuge, customers gain access to a broad selection of precision aids and the logistical reliability of a European distribution hub, which eases procurement and ensures consistent availability for industrial and trade customers. For ordering or tailored advice on integrating the Vertex VWS-VJ-500 prism jaw attachment into existing fixtures, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VWS-VJ-500 GTIN: 4061905092572 Brand: Vertex Facts Weight: 0.58 kg eCl@ss: 21029205 Special features Prism jaw attachment for precision workholding Image assets available for inspection SKU: VWS-VJ-500 FAQ What is the primary function of this prism jaw attachment? The prism jaw attachment VWS is intended to provide a defined support for round and cylindrical parts, improving locating accuracy and enabling repeatable clamping in machining and measurement setups. Is the VWS-VJ-500 suitable for use in tight setups? Yes, the compact design and 0.58 kg weight make the VWS-VJ-500 well suited to constrained spaces on machine beds and inspection fixtures where a small footprint is required. Which manufacturer produces this attachment? The prism jaw attachment is manufactured by Vertex; the product is listed as VWS-VJ-500 and supplied through Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact 0.88 kg prism jaw attachment for reliable clamping and straightforward inventory tracking; order directly via Metav Werkzeuge or consult our advisers for specification checks. Prism Jaw Attachment VWS-VH-6 by Vertex — compact 0.88 kg prism jaw A Prism jaw attachment VWS-VH-6 engineered for prismatic clamping of cylindrical and irregular workpieces in workshop and machining environments. Compact 0.88 kg construction Designed for prism clamping Vertex-manufactured quality SKU VWS-VH-6 for easy identification Secure holding for round and irregular parts A prismatic clamping insert offers a reliable way to hold cylindrical workpieces with reduced risk of deformation. The design transfers clamping pressure along defined contact lines, improving precision and stability during machining operations. At 0.88 kg, the unit combines a lightweight form factor with the handling benefits expected in busy shops, simplifying positioning and reducing operator fatigue. The configuration is suitable where consistent alignment and repeatable seating are required for turning, drilling or inspection tasks. Traceability and straightforward procurement for production control Clear identification aids supply-chain efficiency: the component is listed under SKU VWS-VH-6 and GTIN 4061905086786, enabling quick reordering and stock management. Manufactured by Vertex, the part integrates into established spare-part systems and benefits from manufacturer traceability that supports quality assurance. Using standard identifiers reduces administrative effort and helps maintain uninterrupted workflow when synchronising parts for fixtures, vices and clamping sets. Faster setup and lower handling effort on the shop floor The compact geometry of this prism jaw insert minimises the space required on a vice or fixture, allowing rapid swaps and short changeover times. That simplicity translates into measurable operational gains through reduced setup time and fewer handling steps. For workshops that value pragmatic solutions, the component delivers consistent contact conditions and straightforward mounting, contributing to a smoother production rhythm and dependable repeatability. Contact Metav Werkzeuge for availability and tailored advice on the Vertex VWS-VH-6 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VWS-VH-6 GTIN: 4061905086786 Manufacturer: Vertex ECLASS: 21029205 Weight: 0.88 kg Core Measurements Weight: 0.88 kg GTIN: 4061905086786 ECLASS: 21029205 Design & Features Product type: Prism jaw attachment Range: VWS Identification: SKU VWS-VH-6 Image assets available: vws-vk-4-main.jpg, vws-vl-4-detail.jpg FAQ What is the primary application of this prism jaw attachment? The prism jaw attachment is intended for secure clamping of cylindrical and irregular workpieces where defined contact lines improve stability during machining; the VWS-VH-6 is designed for such prismatic clamping tasks. How is the component identified for reordering? Reordering is simplified via the SKU VWS-VH-6 and GTIN 4061905086786, which support inventory systems and procurement processes. Who manufactures this prism jaw, and what does that imply? This item is manufactured by Vertex; the Vertex origin provides traceability and aligns with standard workshop part management practices. Is the prism jaw heavy to handle on the shop floor? At 0.88 kg the component is lightweight for its class, allowing easier handling and faster setup compared with bulkier clamping accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise prism clamping, lightweight handling and easy identification for consistent setup and fewer rejects. Order the part directly via Metav Werkzeuge or consult the team for compatibility and stock details. Prism jaw attachment "VWS" — prism-profile clamping jaw, precision orientation, Vertex Prism jaw attachment "VWS" provides a dedicated prism clamping solution for secure holding of round and cylindrical components during measurement and light machining operations. Precision prism geometry for secure round parts Compact design at 0.51 kg weight Compatible with VWS series fittings Manufacturer Vertex – SKU VWS-VA-5 Accurate seating for cylindrical parts improves measurement reliability The prism profile of this clamping insert is engineered to centre and stabilise cylindrical components, reducing lateral movement during measurement. By providing a defined bearing line, the prism shape supports repeatable positioning which contributes to consistent measurement results and fewer rework cycles. The design is particularly useful in clamping technology contexts where round parts require reliable contact points for inspection or processing. Clear, reproducible seating reduces setup time and improves downstream quality control. Compact form and handling that speeds up fixture changes With a mass of 0.51 kg, the attachment is lightweight enough for quick handling while remaining stable in the clamping seat. The compact dimensions enable efficient use of bench space and simplify tool changes in a modular fixturing system. Where frequent swaps between jaws are necessary, the reduced mass lowers the effort required for manual handling and speeds up changeovers, thereby supporting lean workflows in small-batch production and inspection routines. Clear identification and integration into existing setups Labelling and the SKU VWS-VA-5 allow straightforward inventory control and reordering. The component is supplied as part of the VWS range from Vertex and is intended for integration into compatible jaw and vice systems. The defined geometry aids in aligning parts for both metrology and light clamping tasks, making it a useful accessory in measuring benches, calibration fixtures and controlled assembly stations. Documentation and images are available for verification prior to purchase to support planning and procurement. Contact Metav Werkzeuge for availability, technical matching and ordering guidance on the Vertex prism jaw attachment VWS-VA-5 Technical Data Article number: VWS-VA-5 GTIN: 4061905088742 Manufacturer: Vertex eClass: 21029205 Facts Weight: 0.51 kg Special features Product type: Prism jaw attachment Series: VWS SKU: VWS-VA-5 Images available in product gallery FAQ What is the primary purpose of this prism jaw attachment? The prism jaw attachment is intended to seat and stabilise round and cylindrical components for measurement and light clamping, improving repeatability and positioning in inspection setups. Is the VWS-VA-5 compatible with other Vertex jaw systems? The VWS-VA-5 is part of the VWS series by Vertex and is designed for integration into compatible VWS fittings and clamping configurations. What is the weight of the prism jaw attachment? The prism jaw attachment weighs 0.51 kg, which supports easy handling and rapid fixture changes without compromising stability. How is the item identified for ordering and stock control? The component is listed under SKU VWS-VA-5 and GTIN 4061905088742 to ensure precise ordering and inventory management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision prism faces and a lightweight 0.35 kg design for reliable clamping and minimal load on fixturing systems. Order the prism jaw directly via Metav Werkzeuge or consult our product specialists for integration advice. Prism Jaw Attachment VWS-VMC-4 – Precision prism faces, compact 0.35 kg (Vertex) The Prism Jaw Attachment VWS-VMC-4 is a compact clamping insert engineered for secure support of cylindrical and round components during machining and inspection operations, delivering repeatable positioning in shop-floor and light industrial setups Precision-ground prism faces Low weight: 0.35 kg Vertex-manufactured quality GTIN 4061905089824 for traceability Consistent, repeatable clamping for round workpieces The prismatic insert provides consistently centred support for cylindrical stock, reducing repositioning time and enhancing process reliability. Precision-ground prism faces ensure repeatable contact points that translate directly into fewer setup adjustments and less scrap. For operators and planners this means improved throughput: fixtures remain stable under load and concentricity is maintained during milling or measurement tasks. The design focuses on functional benefits rather than embellishment, so the advantage is straightforward — precision that supports efficient production. Lightweight design that eases handling and protects equipment At just 0.35 kg, this prism jaw minimises additional mass on the vice or fixture, which helps to preserve the dynamics of portable setups and reduces wear on rotary and linear motion components. The low mass supports faster manual handling during changeovers and reduces strain during frequent reconfiguration. In practical terms, the lightweight insert contributes to faster cycle times and gentler handling of sensitive assemblies while maintaining robust contact with the workpiece thanks to its prismatic geometry and machining tolerances. Traceability and build quality that support industrial workflows Manufactured by Vertex, this prismatic attachment is documented with GTIN 4061905089824, enabling inventory control and traceable procurement. Clear identification and manufacturer provenance simplify replacement planning and quality audits. The product’s straightforward form and documentation support integration into existing fixturing strategies, and its construction aligns with standard clamping practices used across workshops and service departments. This contributes to dependable supply and reproducible results in everyday production environments. Choose Vertex quality for dependable clamping — contact Metav Werkzeuge in Emmerich for procurement guidance or to request supplementary technical data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: VWS-VMC-4 GTIN: 4061905089824 Weight: 0.35 kg Manufacturer: Vertex Core Data ECLASS: 21029205 Weight (kg): 0.35 GTIN numeric: 4061905089824 Special features Prism jaw attachment for clamping round components Vertex brand quality Compact, low-mass design Image assets available for visual reference FAQ What materials is the prism jaw suited to support during clamping? The prism jaw attachment is designed to support cylindrical and round components; it provides secure contact for typical metals and machined parts used in workshop environments. How heavy is the VWS-VMC-4 and what impact does that have on fixtures? The VWS-VMC-4 weighs 0.35 kg, a low mass that reduces additional load on vice slides and rotating fixtures and helps when frequent changeovers are required. Is the product traceable for inventory and procurement? Yes — the item is documented with GTIN 4061905089824 and the SKU VWS-VMC-4 to support traceability and stock management. Who manufactures this prism jaw and where can specification details be requested? Manufactured by Vertex, full specification requests and technical clarifications can be directed to Metav Werkzeuge via the contact details provided in the product listing Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining precise prismatic clamping with a compact, lightweight design (0.4 kg), the VWS prism jaw attachment delivers secure support for cylindrical components and contributes to consistent machining results; order the VWS prism jaw attachment directly via Metav Werkzeuge or ask the consultants if further clarification is needed. VWS Prism Jaw Attachment – Precision prismatic clamping, 0.4 kg (Vertex) VWS is a prism jaw attachment designed to provide prismatic support for cylindrical workpieces in workshop and machine-tool clamping setups, helping to stabilise round parts during machining and inspection. Secure prism support for round workpieces Compact, lightweight design 0.4 kg Precision machining for repeatable clamping Series VWS for straightforward integration Consistent support for cylindrical parts reduces rework The VWS prism jaw attachment delivers secure clamping through a prismatic contact profile that stabilises round and tubular workpieces. By aligning the workpiece on defined prism surfaces, machining and measuring operations gain improved concentricity and reduced radial play. This leads to fewer setup iterations and less rework, which supports higher process reliability. The design prioritises precision contact over broad surface pressure, so fixtures maintain part geometry during cutting or inspection sequences. Minimal added mass maintains machine dynamics With a total mass of 0.4 kg, the prism-mounted jaw keeps added inertia low, preserving spindle and axis dynamics during rapid cycles. The compact construction facilitates quick handling and faster jaw changes in high-mix production environments while maintaining repeatable clamping points. A lower mass clamping insert reduces the risk of overloading smaller workholding systems and helps to sustain cycle times without compromising positional stability or repeatability. Practical gains for workshop throughput and quality assurance In everyday workshop use the prismatic insert supports faster set-up and consistent results across batches, making it a practical choice for small-series turning, milling and inspection tasks that involve round components. The robust prismatic seating reduces operator adjustments and contributes to predictable downstream processes. Sourcing through an experienced partner ensures parts meet expected standards of fit and finish; Metav Werkzeuge acts as a quality filter for the European market, combining product availability with technical guidance to support operational continuity. For production environments that demand repeatable prismatic clamping, request tailored advice or obtain the Vertex VWS prism jaw attachment via Metav Werkzeuge — Metav Werkzeuge’s specialists can advise on integration and supply. Technical Data Article number: VWS-VMC-6 GTIN: 4061905090011 Name: Prism jaw attachment (VWS) Brand: Vertex Facts Weight: 0.4 kg ECLASS: 21029205 Special features Series: VWS Images: vws-vk-4-main.jpg, vws-vl-4-detail.jpg FAQ What is the primary purpose of this prism jaw attachment? The VWS prism jaw attachment is intended to provide prismatic support for cylindrical workpieces, improving stability and concentricity during machining or measurement operations. How heavy is the VWS prism jaw attachment? The VWS prism jaw attachment has a weight of 0.4 kg. Is the material of the prism jaw specified? Material information is not provided for the VWS prism jaw attachment in the available data. Which identifiers should be used to reference this product? Reference the Article number VWS-VMC-6 and GTIN 4061905090011; the ECLASS code is 21029205. Are visual references available to inspect the design details? Yes, product images are available (vws-vk-4-main.jpg and vws-vl-4-detail.jpg) for visual inspection of the geometry and mounting form. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Precision support for cylindrical components and a robust Vertex build result in repeatable clamping and reliable handling across workshop operations; benefit from the compact 1.76 kg unit and the clear SKU reference for order processing. Order the prism jaw attachment directly via Metav Werkzeuge or consult our specialists for application advice. Prism jaw attachment VWS-VA-8 — Vertex prism jaw for stable cylindrical support Prism jaw attachment VWS-VA-8 for stable support of round and turned workpieces in clamping setups Prism jaw attachment VWS series Stable support for cylindrical parts Compact unit, weight 1.76 kg Made by Vertex for workshop use Increase process reliability with precise prism support The prism-style clamp provides a defined contact geometry that improves repeatability when holding round parts. By using a dedicated prism profile the setup reduces lateral movement and ensures consistent seating of shafts and bar material. For production environments where reproducible positioning matters, this attachment offers a technical advantage: the design transfers clamping forces into a stable support rather than relying on surface friction alone. The unit’s modest mass complements quick handling while maintaining solid contact for measurement, inspection or secondary machining tasks. Streamline workshop integration and part handling Designed as an accessory for clamping systems, the jaw attachment simplifies fixturing by offering a ready-made bearing surface for cylindrical workpieces. The engineered geometry reduces the need for bespoke parallels or soft jaws, saving setup time and minimising handling steps. Built to Vertex standards, the component combines straightforward function with durable workmanship, lowering maintenance demands and supporting a steady production flow. The clear SKU and factory designation enable direct procurement and traceability within inventory systems. Support for quality-focused operations and supplier confidence Adopting a purpose-built prism support contributes to measurable improvements in throughput and inspection certainty. The compact construction and consistent contact points lead to fewer reworks and faster alignment, which is particularly relevant in small-batch precision work and mixed-production shops. Sourced under the Vertex name, the attachment aligns with Metav’s emphasis on accessible precision: dependable components that form part of a practical, centrally supplied toolset for industry and trade partners. Choose Vertex quality with the VWS-VA-8 prism jaw attachment — contact Metav Werkzeuge for tailored application advice and to secure this component for your clamping equipment Technical Data Article number: VWS-VA-8 GTIN: 4061905091018 Manufacturer: Vertex Core specifications Weight: 1.76 kg ECLASS: 21029205 UID: VWS-VA-8 Special features Prism jaw attachment (Prismenaufsatzbacke) Series designation: VWS Brand: Vertex FAQ What purpose does the prism jaw attachment serve? The prism jaw attachment provides a defined bearing surface to support and locate cylindrical workpieces, improving stability during clamping and handling with the Vertex VWS-VA-8. What is the weight of the unit? The VWS-VA-8 has a mass of 1.76 kg, which supports easy handling while maintaining solid contact for repeatable fixturing. How is the product identified for ordering? Order or reference the item using SKU VWS-VA-8 and GTIN 4061905091018; the manufacturer is Vertex. Can the prism jaw attachment be used across different clamping systems? The design is intended as a prism-style jaw for integration with compatible clamping setups; suitability for a specific chuck or fixture should be verified against system interfaces. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a precision prism profile, robust workshop construction and lightweight handling to improve clamping reliability and set-up speed; order the part directly via Metav Werkzeuge or consult our technical advisers for application matching. Prism jaw attachment VWS-VK-8 — Vertex precision prism profile, 1.16 kg A Prism jaw attachment for secure clamping of cylindrical and round stock in workshop and production environments, designed for reliable positioning and repeatable results Precision prism profile for round stock Solid construction, workshop-ready Lightweight at 1.16 kg for easy handling Consistent, precise clamping for round workpieces The VWS-VK-8 prism jaw attachment delivers a consistent prism contact surface that centres and supports cylindrical parts during clamping. The geometry reduces lateral movement and improves concentricity, which is particularly beneficial for turning, grinding and inspection set-ups. Owing to its defined contact angle, the component minimises distortion of sensitive parts while ensuring repeatable positioning between operations. This leads to measurable gains in process reliability and fewer reworks, supporting higher first-pass yields. Engineered for everyday workshop use and handling efficiency Constructed with workshop demands in mind, the assembly balances robustness with a low mass of 1.16 kg, reducing operator fatigue during fixture changes and speeding manual set-up. The reduced weight also simplifies handling when swapping jaws or configuring chucks, shortening changeover times. Designed to integrate with standard clamping systems, the jaw offers uncomplicated mounting and durable performance under routine load cycles, which enhances overall equipment availability and supports a steady production rhythm. Clear benefits for process planners and quality control The prism attachment supports improved measurement and machining outcomes by providing stable, repeatable support for cylindrical components. For quality control, the defined contact reduces variability in run-out readings and helps maintain alignment through several machining steps. When paired with systematic set-up routines, the jaw contributes to leaner workflows and predictable tolerances, delivering a pragmatic cost-benefit through lower scrap rates and reduced inspection time. Metav’s role as a precision partner ensures each component is supplied through a quality-filtered distribution network in Emmerich, helping to simplify procurement for workshops and industrial users. Request a compatibility check or order through Metav Werkzeuge — our consultants in Emmerich can confirm fitment for specific chucks and advise on integration of the Vertex prism jaw VWS-VK-8; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VWS-VK-8 GTIN: 4061905095764 ECLASS: 21029205 Numbers / Core technical data Weight: 1.16 kg Special features Prism jaw attachment Brand: Vertex FAQ What is the primary application for this prism jaw attachment? The VWS-VK-8 prism jaw attachment is intended for secure clamping of cylindrical and round stock to improve concentricity during machining and inspection tasks. How much does the VWS-VK-8 weigh? The prism jaw VWS-VK-8 has a mass of 1.16 kg, which aids handling without compromising stability. Is the prism jaw compatible with common workshop chucks? The VWS-VK-8 is supplied as a prism-type jaw intended for integration with standard clamping systems; technical advisers can confirm compatibility for specific chucks. What advantages does the prism profile provide in quality control? The defined prism contact of the VWS-VK-8 reduces lateral movement and run-out, supporting more consistent measurement and higher repeatability in inspection and machining. Who manufactures the prism jaw VWS-VK-8? The part is manufactured by Vertex and is offered through Metav Werkzeuge as part of their precision clamping range. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Technische Daten: Bezeichnung: Lampe Vollhartmetall IP-Schutz: IP 67 oder Licht IP 67 und Arm IP 65 je nach Ausführung Gewicht: 1,6 kg bis 4 kg Zubehör inklusive: Kabel 1,8m Arm: 1 Gelenk bis 400x400mm (rund) Leistung: 110V/220V Licht: 12V/50W (Halogen) - 9 W (LED) Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.

Nach IP67 zertifiziert und somit staubdicht und gegen zeitweiliges Untertauchen geschützt. Diese Eigenschaften machen die LED-Maschinenlampe besonders langlebig und widerstandsfähig gegen Schmutz und Feuchtigkeit. Ob in der Industrie, im Handwerk oder in anderen anspruchsvollen Anwendungen - das Werkzeug bewahrt seine Funktionalität selbst in rauesten Umgebungen. Technische Daten: Bezeichnung: LED-Maschinenlampe VHM IP-Schutz: IP 67 Besonderheit: 3 Arten zur Befestigung: Magnet, Haken und Stand Geeignet für: 12 W Glühbirne oder 7,5 W Glühbirne je nach Ausführung Gewicht: 0,61 kg - 3,5 kg Länge: 300 mm bis 734 mm Winkel: 120° Leistung: 100V-240V Lichttemperatur: 5300 K Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.

Technische Daten: Bezeichnung: LED-Signallicht VHM IP-Schutz: IP 54 Durchmesser: 60 mm bis 60 mm Gewicht: 0,7 kg bis 0,77 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.