Combining a swivelling threaded insert with a nickel-plated finish, this spanner accelerates hanger-bolt and wall-anchor installations while resisting corrosion. The 220 mm length delivers reliable leverage for secure fixings. Order the GEDORE Stock Screw Spanner 3171 directly via Metav Werkzeuge or consult our specialists for application guidance. GEDORE Stock Screw Spanner 3171 — hanger bolt spanner with swivelling thread insert, nickel-plated GEDORE Stock Screw Spanner 3171 for fast, reliable hanger-bolt and wall-anchor fittings in workshop and site environments For hanger bolt and wall anchor fixings Swivelling threaded insert for easy engagement Nickel-plated corrosion-resistant surface 220 mm length for secure leverage Faster installation through a swivelling threaded insert The GEDORE Stock Screw Spanner 3171 is designed for efficient attachment of hanger bolts used in wall-dowel and anchor systems. The core advantage is the swivelling threaded insert, which permits quick engagement with threaded studs of sizes M6–M12, reducing alignment time and the need for repeated repositioning. In practical terms, this means fewer tool changes and a more continuous workflow when fitting anchors into masonry or other substrates. The tool’s functionality is aimed at workshop professionals and installers who value measurable time savings on repetitive fixing tasks. Durable finish and extended leverage for secure fittings A nickel-plated surface provides improved resistance to corrosion compared with untreated steel, helping to preserve the tool’s performance over time and under intermittent outdoor or humid conditions. At 220 mm overall length, the spanner offers deliberate leverage for tightening and loosening hanger bolts without excessive exertion, improving torque control and reducing hand fatigue. The combination of finish and length supports consistent, reproducible results during installation work, contributing to fewer reworks and greater on-site reliability. Clear compatibility and low-maintenance use The spanner is specified for hanger-bolt applications and accepts common stud diameters M6, M8, M10 and M12, making it suitable for a broad range of wall-anchor systems. For users less familiar with thread designations: the “M” value denotes the nominal thread diameter in millimetres, so M6 indicates a 6 mm stud. Routine care is straightforward — wipe clean after use, avoid abrasive chemicals that could affect the plating, and store in a dry place to maintain the finish. The straightforward specification reduces the need for complex matching decisions and simplifies procurement for maintenance teams. Robust choice for trade and workshop environments Built to support repetitive fixing tasks, the tool is intended for professional trade and workshop use where dependable mechanical properties matter. The practical design helps to minimise installation time while maintaining consistent engagement with threaded studs. Where precision and repeatability are priorities, this spanner provides a focused, cost-effective option that integrates well into a kit of installation tools. For reliable hanger-bolt installations choose the GEDORE Stock Screw Spanner 3171 from Metav Werkzeuge — available from our Emmerich hub with expert advice and swift dispatch, contact info@metav-werkzeuge.com or +49 2822 7131930 for detailed application support. Technical Data Article number: 4000812519NW SKU/UID: 4000812519NW Manufacturer: GEDORE Werkzeugfabrik GmbH & Co. KG Packaging unit: 1 Facts Length: 220 mm Thread compatibility: M6, M8, M10, M12 Special features Application: for wall anchor fixings (hanger bolts) Feature: swivelling threaded insert Surface: nickel-plated FAQ Which thread sizes does the spanner accept? The GEDORE Stock Screw Spanner 3171 accepts threaded studs in sizes M6, M8, M10 and M12, covering common hanger-bolt diameters used for wall-anchor fixings. Is the surface resistant to corrosion? Yes, the tool features a nickel-plated surface that improves corrosion resistance and helps maintain a reliable finish in workshop and intermittent outdoor use. Can the spanner be used with different types of wall anchors? The spanner is designed for hanger-bolt and wall-anchor installations; it engages the threaded portion of the stud rather than the anchor body, making it compatible with a wide range of anchor systems that employ external threads. How does the swivelling threaded insert help during installation? The swivelling threaded insert eases initial engagement with the stud, reducing the need for precise alignment and speeding up repetitive fixing tasks, which is particularly useful on-site. What is the overall length and what benefit does it provide? The tool measures 220 mm overall, providing improved leverage for secure tightening and better torque control compared with very short keys. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Gewindeeinsatz DIN 8140, Typ Standard (V-COIL) von VÖLKEL Der Gewindeeinsatz von VÖLKEL sorgt für dauerhafte, korrosionsbeständige Innengewinde nach DIN 8140 und eignet sich für sichere Verbindungen in Industrie und Werkstatt Frei durchlaufender Gewindeeinsatz nach DIN 8140 Aus rostfreiem Stahl für hohe Korrosionsbeständigkeit Präzise Toleranz ISO 2 (6H) für passgenaue Montage Für metrisches Gewinde M10 x 1,5 ausgelegt V-COIL System für belastbare Innengewinde Robuste Materialwahl für langfristige Korrosionsbeständigkeit Der Einsatz besteht aus rostfreiem Stahl, der mechanische Festigkeit mit zuverlässiger Korrosionsbeständigkeit verbindet. Diese Materialwahl reduziert Nacharbeit und Ausfallzeiten, weil Gewindeflanken weniger korrodieren und damit länger tragfähig bleiben. Für Betriebe, die Bauteile in feuchter Umgebung oder mit chemischer Beanspruchung montieren, bedeutet das weniger Reklamationen und stabilere Montageergebnisse. Präzise Passform nach Norm für sichere Verbindungen Geliefert nach DIN 8140 mit Toleranz ISO 2 (6H) garantiert der Einsatz eine definierte Passung für M10 x 1,5 Gewinde. Die Angabe Nennmaß 2,0 x D beschreibt das Verhältnis von Einsatzlänge zu Nenndurchmesser und hilft bei der richtigen Auslegung für Bauteildicke und Lastverteilung. Diese Normkonformität vereinfacht die Planung: Bohrbild und Einbaumaße lassen sich direkt aus den Vorgaben ableiten, womit Montagetoleranzen minimiert werden. Wirtschaftliche Beschaffung und einfache Integration in Fertigungsprozesse Die Konstruktion als frei durchlaufender Einsatz im V-COIL-System ermöglicht schnelle Montage mit Standardwerkzeug und sichert hohe Tragfähigkeit bei wiederholter Lastanwendung. Durch die standardisierte Ausführung lassen sich Ersatz- und Verschleißteile problemlos austauschen, was die Instandhaltung vereinfacht. Für Einkäufer und Werksmeister bietet die Kompatibilität mit gängigen Fertigungsprozessen unmittelbare Vorteile bei Beschaffung und Lagerhaltung. Setzen Sie auf die bewährte Gewindetechnik von VÖLKEL über Metav Werkzeuge – bei Fragen zur Anwendung oder Spezifikation erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Technische Daten Artikelnummer: 4000867643NW Marke: VÖLKEL GmbH Typ/Ausführung: Standard Fakten Norm: DIN 8140 Gewinde: M10 x 1,5 mm Nennmaß: 2,0 x D Toleranz: ISO 2 (6H) Besonderheiten Material: Rostfreier Stahl Frei durchlaufend V-COIL System Lieferform: Verpackungseinheit 100 Stück FAQ Was bedeutet Nennmaß 2,0 x D beim Gewindeeinsatz? Das Nennmaß 2,0 x D beschreibt das Verhältnis von Einsatzlänge zum Nenndurchmesser und hilft bei der Auswahl der passenden Einsatzlänge für das Bauteil; beim Gewindeeinsatz DIN 8140 von VÖLKEL sorgt dieses Verhältnis für ausreichende Eingreiftiefe und Lastverteilung. Ist der Gewindeeinsatz für korrosive Umgebungen geeignet? Ja, der Gewindeeinsatz aus rostfreiem Stahl ist für Umgebungen mit erhöhter Feuchtigkeit oder moderaten chemischen Belastungen geeignet und reduziert dadurch Korrosionsrisiken im Vergleich zu unbeschichteten Einsätzen. Welche Toleranzklasse hat dieser Einsatz und warum ist das wichtig? Der Einsatz entspricht der Toleranz ISO 2 (6H), was eine präzise Passung gewährleistet und Montageabweichungen minimiert; das ist besonders wichtig für Schraubverbindungen mit definierter Vorspannkraft. Wie wird der Einsatz montiert und passt er in Standardbohrungen? Der frei durchlaufende V-COIL-Einsatz ist für die Montage mit gängigen Einbringwerkzeugen ausgelegt und kann in Bohrungen nach DIN 8140 eingesetzt werden; die Standardisierung erleichtert die Integration in bestehende Produktionsprozesse. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Stainless, DIN‑compliant reinforcement for reliable threaded connections; combines corrosion resistance, exact ISO tolerance and a production-ready pack for uninterrupted assembly. Order the V-COIL inserts directly via Metav Werkzeuge or consult the consultants for specification and supply. V-COIL threaded insert DIN 8140 for M10 x 1.5 — stainless steel, 1.5×D, 100 pcs The V-COIL threaded insert is a standard DIN 8140 solution for restoring or reinforcing M10 x 1.5 threads in metallic assemblies, suited to industrial and maintenance applications. DIN 8140 compliant threaded insert Stainless steel construction, corrosion-resistant ISO 2 (6H) tolerance for precise fits 1.5×D nominal length for secure engagement Pack of 100 inserts for production runs Durable reinforcement that keeps assemblies in service The helical coil design provides a robust threaded reinforcement that restores stripped threads and prevents further wear. Manufactured from stainless steel, the coil offers long-term corrosion resistance where environmental exposure or frequent assembly cycles would otherwise compromise fastenings. Using a coil with a nominal length of 1.5×D ensures sufficient thread engagement to transfer loads reliably while maintaining the original fastener class. Precision fit according to recognised standards Compliance with DIN 8140 and a tolerance of ISO 2 (6H) guarantees predictable interference and interchangeability across production batches. This level of dimensional control supports process stability and reduces rework: assemblies meet specification first time, reducing downtime and scrap. The insert’s geometry and material selection allow predictable torque and clamping behaviour, which is essential for repeatable assembly processes in workshops and production lines. Ready-for-production packaging and material benefits Delivered as a pack of 100, the system supports small-batch maintenance as well as continuous production runs without frequent replenishment. The free‑running coil form (continuous/“frei durchlaufend”) simplifies insertion and speeds installation with conventional winding tools, saving time during assembly and repair. The stainless composition also minimises inventory complexity by covering a range of operating environments where corrosion resistance is required. Simple installation and broad application scope Installation is achieved with standard coil insertion tools and follows established procedures for helical inserts, producing a secure seat for M10 x 1.5 fasteners. The solution suits both repair scenarios and new‑build reinforcement where enhanced thread strength is desired. Its standard type construction permits application in a wide variety of steel and non-ferrous components while retaining predictable mechanical performance. For specification support or to secure a production supply of V-COIL threaded inserts in stainless steel contact Metav Werkzeuge in Emmerich — technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with selection and delivery. Technical data Article number: 4000867644NW Item name: Threaded insert DIN 8140, standard type, M10 x 1.5 Brand: VÖLKEL GmbH Pack unit: 100 pcs UID: 4000867644NW Core dimensions Thread size: M10 x 1.5 Nominal length: 1.5×D Tolerance: ISO 2 (6H) Pack quantity: 100 pcs Materials & features Material: stainless steel Standard: DIN 8140 Type: Standard Free-running (continuous) helical coil V-COIL system FAQ What is the intended application for these inserts? The V-COIL threaded insert is designed to restore or reinforce M10 x 1.5 threads in metal components, providing a corrosion‑resistant, standardised thread form suitable for industrial assembly and repair. Are these inserts suitable for corrosive environments? Yes, the inserts are made from stainless steel, offering enhanced corrosion resistance compared with plain steel coils and making them suitable for applications with exposure risks. Which tolerance class do the inserts conform to? The inserts are manufactured to a tolerance of ISO 2 (6H) and comply with the dimensional requirements of DIN 8140, ensuring consistent thread fit and interchangeability. How many inserts are supplied per pack? The product is packed as 100 pieces per unit, intended to support both maintenance tasks and production runs without frequent restocking. Can standard insertion tools be used with these coils? Yes, the continuous helical design permits installation with conventional coil insertion tools; follow standard helical insert installation procedures to achieve secure seating. Manufacturer: VÖLKEL GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining DIN 8140 compliance with a stainless steel construction and ISO 2 (6H) tolerance delivers reliable, corrosion‑resistant thread reinforcement for M10 x 1.5 applications; order the V‑COIL inserts directly via Metav Werkzeuge or consult the technical team for specification support. V‑COIL Thread Insert M10 x 1.5 — DIN 8140 standard, stainless steel (VÖLKEL) A V‑COIL thread insert M10 x 1.5 designed as a standard, free‑running insert for reinforcing or creating durable internal threads in metal assemblies. DIN 8140 standard compliant Stainless steel for corrosion resistance ISO 2 (6H) tolerance for precise fit Continuous, free‑running thread design Reliable thread reinforcement for demanding assemblies The V‑COIL insert provides a secure method for creating or repairing internal threads to the M10 x 1.5 specification while meeting the DIN 8140 standard. Made from stainless steel, the component offers corrosion‑resistant performance where exposure to moisture or mild chemicals is a concern. The continuous, free‑running geometry reduces risk of thread hang‑ups during assembly and permits smooth engagement of mating bolts, supporting faster cycle times and reducing rework caused by damaged threads. Engineered tolerances for repeatable, accurate fits Tolerance control is central to predictable assembly behaviour; these inserts are manufactured to ISO 2 (6H) tolerance, which ensures repeatable mating with standard bolts and screws and minimises play in the joint. The nominal length of 1.0 x D aligns insert length to the hole diameter, balancing strength and material use. In practice, the controlled tolerance and defined length translate into consistent torque transfer and predictable preload in bolted joints, aiding quality control and simplifying inspection protocols. Durable performance and application flexibility Constructed from stainless steel and offered as a standard type, the insert combines durability with broad applicability across mechanical assemblies, repair operations and prototyping. The continuous thread design supports installation into pre‑tapped holes for reinforcement or into prepared bores with appropriate installation tools. Batch supply and standard packaging support efficient stock management for production lines or maintenance departments, contributing to lower downtime and steady throughput in workshop environments. For technical clarification or to secure V‑COIL thread inserts for immediate supply, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930; the Metav team can confirm suitability and delivery options. Technical data Article number: 4000867631NW Label: Thread insert DIN 8140, standard type, M10 x 1.5, stainless steel, V‑COIL UID: 4000867631NW Core technical data Nominal thread: M10 x 1.5 Nominal length: 1.0 x D Tolerance: ISO 2 (6H) Standard: DIN 8140 Pack unit: 100 pieces Materials / Special features Material: stainless steel Type: Standard, continuous (free‑running) thread Brand: V‑COIL Free running design: yes FAQ What is the nominal thread size of these inserts? The thread inserts are specified for M10 x 1.5 internal threads and conform to the DIN 8140 form for this size. Which standard and tolerance apply to these V‑COIL inserts? Production follows DIN 8140 and the manufactured tolerance is ISO 2 (6H) to ensure consistent mating with standard fasteners. What material is used for the inserts? The inserts are manufactured from stainless steel, giving the V‑COIL insert improved corrosion resistance for industrial and maintenance applications. How is the nominal length expressed and why does it matter? Nominal length is given as 1.0 x D, relating the insert length to the nominal diameter to balance engagement length and material usage for predictable joint strength. In which situations are these thread inserts typically used? These thread inserts suit thread reinforcement, repair of worn threads and new-thread installations in assemblies where durability and repeatable fits are required; they are supplied in standard pack units suitable for production and maintenance needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a corrosion‑resistant stainless steel construction, DIN 8140 conformity and a set of 15 V‑Coil inserts for reliable thread restoration; order the kit directly via Metav Werkzeuge or consult the team for technical advice. V‑Coil Thread Repair Kit M10 x 1.5 — stainless steel, DIN 8140 by VÖLKEL A V‑Coil thread repair kit for reinstating damaged internal threads and reinforcing M10 x 1.5 connections in industrial maintenance and repair tasks DIN 8140 compliant inserts Stainless steel construction Contains 15 inserts 1.5×D insert length Maintain production continuity with standard‑compliant thread restoration The V‑Coil thread repair kit M10 x 1.5 delivers a standardised solution for reinstating damaged internal threads. Built to DIN 8140, the set aligns with established engineering tolerances and inspection criteria, which reduces uncertainty during acceptance checks. The stainless steel inserts provide corrosion resistance where metallic contact and longevity are required, while the V‑Coil geometry restores the original thread form and load distribution. This systematic approach supports efficient asset maintenance and helps avoid repeated interventions. Improved engagement and load distribution thanks to the 1.5×D inserts Each insert in the set has a length of 1.5×D, which increases the axial engagement compared with shorter inserts and improves thread strength under cyclic and static loads. The coiled‑wire design provides uniform contact across the mating bolt, improving clamping reliability without changing the nominal bolt size. The set specification emphasises measurable performance: the defined insert length and coil geometry ensure predictable mechanical behaviour, which simplifies component selection and failure‑mode considerations in maintenance schedules. Practical scope and ready availability for routine repairs The repair set contains 15 inserts, supplied as a single kit for straightforward inventory management. The kit is tailored for the M10 x 1.5 metric thread, enabling direct replacement of worn internal threads without altering mating hardware. The compact scope of delivery makes it suitable for workshop maintenance kits and on‑bench repairs where rapid turnaround is required. Because the inserts conform to an industry standard, integration into existing repair procedures and documentation is simplified and audit trails remain intact. Durable materials and brand reliability for traceable repairs Constructed from stainless steel and provided under the VÖLKEL name, the insert set is designed for durability in environments where oxidation and corrosion could undermine repair longevity. The use of a recognised thread‑repair system reduces the risk of non‑conforming restorations and supports traceability in quality records. For businesses aiming to keep equipment in service with minimal interruption, a standardised, corrosion‑resistant thread repair solution contributes directly to operational reliability and predictable maintenance budgeting. For procurement and technical clarification on the V‑Coil thread repair set by VÖLKEL, contact Metav Werkzeuge in Emmerich — technical advice and order handling are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000867010NW SKU / UID: 4000867010NW Manufacturer: VÖLKEL GmbH Specifications Thread size: M10 x 1.5 Insert length: 1.5×D Number of inserts: 15 Packaging unit: 1 Special features Material: stainless steel Standard: DIN 8140 Insert type: V‑COIL Brand: VÖLKEL GmbH FAQ What thread size is covered by this repair set? The set is specified for M10 x 1.5 internal threads; the V‑Coil thread repair kit M10 x 1.5 (SKU 4000867010NW) matches that metric standard. How many inserts are included in the kit? The kit contains 15 inserts, supplied as a single set for workshop stocking and serial repairs. What material are the inserts made from? The inserts are manufactured from stainless steel, providing corrosion resistance for longer service life in typical industrial environments. Which standard does the product comply with? Conformity is declared to DIN 8140, ensuring compatibility with recognised engineering tolerances and inspection criteria. What does 1.5×D mean for the inserts? The designation 1.5×D indicates that each insert has an axial length equal to 1.5 times the nominal thread diameter, increasing thread engagement and improving load distribution for restored connections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a stainless steel, DIN‑compliant repair system that restores load-bearing threads quickly and reliably; the included 15 inserts and 1.5×D length provide strong engagement and long service life. Order the kit directly via Metav Werkzeuge or consult our specialists for technical advice. V-COIL Thread Repair Kit M10×1 — DIN 8140, stainless steel, 15 inserts A V-COIL thread repair kit designed for restoring stripped or damaged M10×1 metric threads to DIN 8140 standard in mechanical assemblies and workshop components. Stainless steel inserts, corrosion-resistant DIN 8140 compliant repair solution 15 precision inserts per kit 1.5×D length for secure engagement Fast restoration of load-bearing threads for reduced downtime The V-COIL thread repair kit enables efficient repair of worn or damaged threads in housings and components where strength matters. Each M10×1 insert is manufactured from stainless steel, which is corrosion-resistant and suitable for assemblies exposed to moisture or lubricants. Using inserts instead of re-tapping or replacing parts reduces scrap and keeps machines running, delivering measurable savings in maintenance time and component replacement. Standard compliance and reliable retention for long-term performance The kit is produced to DIN 8140 specifications and includes inserts with a length of 1.5×D, a dimension that ensures sufficient thread engagement and load distribution in the parent material. For technicians unfamiliar with the notation: 1.5×D means the insert length equals one and a half times the nominal diameter, improving pull‑out resistance without increasing installation complexity. This standardised approach simplifies quality assurance and keeps assemblies within industry norms. Practical workshop benefits and compatibility with common applications Supplied as a compact set of 15 inserts, the system suits routine maintenance, prototype work and small-batch production repairs. The coil geometry restores full thread profile and maintains original torque characteristics, allowing continued use of standard fasteners. As a ready-to-use repair solution, the kit reduces machine downtime and streamlines maintenance workflows while preserving component integrity over repeated service cycles. For reliable thread restoration with V-COIL inserts, contact Metav Werkzeuge for tailored technical guidance and seamless supply from Emmerich to the workshop bench. Technical data SKU / Article number: 4000867001NW Product description: Thread repair kit M10×1 DIN 8140 Brand: V-COIL Facts Thread size: M10×1 Inserts per kit: 15 Insert length: 1.5×D Special features Material: stainless steel Standard: DIN 8140 System: V-COIL FAQ What thread size does the kit restore? The kit restores M10×1 threads; it contains inserts sized and shaped for metric M10 with 1.0 mm pitch. How many inserts are included and what is their material? This thread repair kit includes 15 inserts, manufactured from stainless steel for enhanced corrosion resistance. What does 1.5×D mean and why is it important? 1.5×D indicates the insert length equals one and a half times the nominal diameter; this length improves retention and distributes load more evenly in the parent material. Is the system compliant with recognised standards? Yes, the repair solution is produced to DIN 8140 and is suitable where conformity to that standard is required. Can the repaired thread accept original fasteners without modification? Once installed, the insert restores the original thread profile so standard M10×1 fasteners can be used without altering tightening procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of standard conformity, corrosion-resistant material and compact packaging to ensure reliable thread performance and simplified logistics; order directly via Metav Werkzeuge or consult the specialists for application advice. VÖLKEL V‑COIL threaded insert DIN 8140 — M12×1.75, stainless steel, 1.0×D The V‑COIL threaded insert (DIN 8140, standard type) provides a free-running internal thread for M12×1.75 applications in machinery and assembly contexts. Standardised to DIN 8140 Made from stainless steel Free‑running internal thread Pack of 100 V‑COIL inserts Robust standard compliance for predictable assembly performance The component conforms to DIN 8140, offering a manufactured tolerance of ISO 2 (6H) which supports consistent thread engagement and interchangeability across production batches. This standard alignment reduces variation during assembly and simplifies quality control processes, making the insert a reliable choice where repeatable fastening performance is required. The M12×1.75 designation specifies the internal thread form, ensuring compatibility with common metric fasteners and enabling straightforward integration into existing designs. Corrosion resistance and dimensional efficiency Constructed from stainless steel, the insert provides enhanced corrosion resistance compared with untreated inserts, extending service life in environments exposed to moisture or light contaminants. The nominal length of 1.0×D means the insert length equals the nominal diameter, providing a compact profile that minimises material removal while still delivering secure thread engagement. The free‑running internal form reduces insertion friction during fastener assembly and supports consistent torque behaviour in repetitive operations. Practical handling and inventory advantages Delivered as a pack of 100, the inserts are suited to small-batch production runs and maintenance stocking alike, streamlining procurement and reducing order frequency. The packaging quantity supports predictable material planning and helps maintain a continuous fastening supply without overstocking. The V‑COIL style design facilitates reliable insertion and repeatable performance, reducing rework and downtime associated with damaged or worn threads. Application clarity and supply support Designed as a standard type in the DIN 8140 family, the insert is suitable where a robust, standardised internal thread is required and where stainless‑steel corrosion resistance is advantageous. Specification-driven procurement is eased by the clear numeric data and standards compliance. For further clarification on fitment, compatibility or batch supply, Metav Werkzeuge offers technical consultancy and a European distribution filter that helps ensure consistent product quality and availability. Consult Metav Werkzeuge for application checks and ordering options — contact +49 2822 7131930 or email info@metav-werkzeuge.com for detailed advice and supply from stock. Technical data SKU: 4000867632NW Label: Gewindeeinsatz DIN 8140 Typ Standard for M12×1.75, stainless steel, 1.0×D, V‑COIL Manufacturer: VÖLKEL GmbH Packaging unit: 100 pcs Core specifications Thread: M12×1.75 Nominal length: 1.0×D Tolerance: ISO 2 (6H) Quantity per pack: 100 pcs SKU: 4000867632NW Features & materials Material: stainless steel Standard: DIN 8140 Type: Standard Free‑running internal thread V‑COIL style insert FAQ What is the thread size and pitch of this insert? The V‑COIL threaded insert is designed for an internal thread of M12×1.75 as specified on the product label (SKU 4000867632NW). Which standard does the insert comply with? The insert complies with DIN 8140 and is manufactured to a tolerance class of ISO 2 (6H), ensuring dimensional consistency. How long is the insert relative to its diameter? The nominal length is 1.0×D, which means the length equals the nominal diameter for a compact, efficient profile. How are the inserts supplied and what is the pack size? The product is supplied in a pack of 100 inserts, suitable for production runs and maintenance stocking (SKU 4000867632NW). Is the material corrosion‑resistant? Yes, the V‑COIL insert is made from stainless steel, providing improved corrosion resistance compared with unprotected alternatives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A free‑running, DIN 8140 stainless‑steel thread insert in M12×1.75 with a 1.5×D nominal length combines repeatable thread quality and corrosion resistance for reliable assemblies; the ISO 2 (6H) tolerance ensures precise mating with standard bolts and reduces rework. Order this V‑COIL insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. V‑COIL Thread Insert DIN 8140 – M12×1.75, Stainless Steel, 1.5×D V‑COIL thread insert (DIN 8140) for reinforcing internal M12×1.75 threads in stainless‑steel assemblies with a free‑running design and ISO 2 (6H) accuracy Free-running insert, compliant with DIN 8140 Made from corrosion-resistant stainless steel ISO 2 (6H) tolerance for precise thread fit Pack of 100 for consistent stock supply Consistent thread performance through standard conformity The insert conforms to DIN 8140, delivering a standardised internal thread form that matches metric fasteners. The ISO 2 (6H) tolerance guarantees a repeatable clearance class so components can be assembled with predictable torque and fit. A nominal length of 1.5×D provides sufficient engagement to restore or strengthen tapped holes while maintaining the necessary material thickness for reliable load transfer. This standard compliance reduces variability in production and lowers the risk of failed assemblies. Corrosion resistance and operational reliability Made from stainless steel, the component offers long‑term resistance against oxidation in humid or cyclic environments. The free‑running design means bolts can pass through unhindered where required, simplifying fastening processes and enabling through‑bolt applications where appropriate. These material and design choices minimise maintenance intervals, prevent thread galling in repeated service, and contribute to uninterrupted machine operation — a practical advantage for workshops and small production lines seeking dependable parts. Practical stocking and application benefits for workshops Supplied in a pack of 100, the insert supports consistent stock levels for repair and assembly tasks, reducing ordering frequency and downtime. The helical‑style reinforcement suits repair work and new builds where stainless‑steel assemblies demand corrosion‑resistant internal threads. For customers seeking guidance on fit or application, Metav’s team can advise on selection and quantities to match workshop routines. The combination of standard conformity and bulk supply supports efficient inventory management and predictable production flow. For secure thread reinforcement with V‑COIL inserts, contact Metav Werkzeuge for stock availability and tailored technical guidance; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Item number: 4000867646NW Description: Thread insert DIN 8140, M12×1.75, stainless steel Pack quantity: 100 Brand: V‑COIL Facts Thread size: M12×1.75 Nominal length: 1.5×D Tolerance: ISO 2 (6H) Standard: DIN 8140 Materials & features Material: stainless steel Type: Standard Free-running (through) VE = 100 FAQ What tolerance class does this insert comply with? The insert is specified to ISO 2 (6H) tolerance, providing a precise internal thread fit suitable for standard metric fasteners and predictable assembly behaviour. Is the insert suitable for corrosive environments? Yes, the insert is manufactured from stainless steel, offering corrosion resistance for use in humid or mildly corrosive conditions where stainless‑steel assemblies are required. How long is the insert relative to the thread diameter? The nominal length is 1.5×D, which ensures adequate engagement for restoring or reinforcing tapped holes while maintaining the correct functional depth for M12×1.75 threads. What quantity is supplied per package and how is it useful for stock management? The product is supplied in a pack of 100, enabling workshop stock consistency and reducing the need for frequent reordering during maintenance or assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a DIN‑compliant solution that combines repeatable thread quality, corrosion resistance and compact packaging for efficient workshop replenishment. The combination of a stainless steel construction, ISO 2 (6H) tolerance and a nominal length of 2.0 x D ensures reliable load distribution and durable internal threads; order via Metav Werkzeuge or consult our technical team for application advice. V-COIL thread insert, DIN 8140 — M12 x 1.75, stainless steel, 2.0 x D The V-COIL thread insert is a standard DIN 8140 internal thread reinforcement designed for creating or repairing M12 x 1.75 metric threads where corrosion resistance and consistent fit are required. DIN 8140 standard — reliable interchangeability Stainless steel for corrosion resistance ISO 2 (6H) tolerance for tight thread fit Pack of 100 inserts — ready for series use Consistent load-bearing threads thanks to standardised geometry The inserts conforming to DIN 8140 provide a predictable thread geometry that reduces variability in production and repair work. With a nominal engagement of 2.0 x D, the insert delivers adequate thread length for stable load transfer without unnecessarily increasing component weight or assembly time. This standardisation simplifies quality control and makes comparison with alternative solutions straightforward, while the metric designation M12 x 1.75 aligns with common machine‑screw specifications used across industrial applications. Corrosion resistance and fit precision for long service life Manufactured in stainless steel, the inserts are suited to environments where oxidation resistance extends service intervals and prevents early thread failure. The specified ISO 2 (6H) tolerance assures a close internal thread fit in new or repaired holes, improving torque transmission and reducing fretting under cyclic loads. For engineers specifying fasteners, this combination of material and tolerance supports durable assemblies without compromising interchangeability with standard bolts and shafts. Packaging and application efficiency for workshop workflows Supplied as a pack of 100, the set supports batch production and routine maintenance regimes while reducing procurement frequency. The design includes a free‑running coil profile allowing through‑bolt configurations where required and simplifying installation in blind or through holes. Handling and inventory are eased by the compact packaging and the consistent geometry, which together speed up assembly cycles and minimise downtime during changeover operations. Practical advantages backed by a reliable supplier network Sourcing from an established distribution channel ensures traceability and steady stock levels for recurring orders. The combination of standard conformity, corrosion‑resistant material and batch packaging makes these inserts a pragmatic choice for repair shops, maintenance teams and production lines that prioritise repeatable results and low failure rates. Metav’s role as a precision partner supports supply continuity and technical advice for integration into existing assembly procedures. For availability, technical clarification or to secure regular deliveries contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000867645NW Product designation: Thread insert DIN 8140, standard type, M12 x 1.75, stainless steel, 2.0 x D, pack 100 V-COIL Manufacturer (raw data): VÖLKEL GmbH Packaging unit: 100 Facts Thread size: M12 x 1.75 Nominal length: 2.0 x D Pack quantity: 100 Special features Material: stainless steel Standard: DIN 8140 Type: Standard Tolerance: ISO 2 (6H) Free‑running coil design Brand/series: V-COIL FAQ What hole preparation is required for these inserts? Hole preparation should follow the DIN 8140 recommendations; the V-COIL thread insert requires the corresponding drill and tap sizes for an M12 x 1.75 installation to achieve the specified 2.0 x D engagement. Are these inserts suitable for stainless steel components? Yes, the stainless steel construction of the V-COIL thread insert provides compatibility and corrosion resistance when used in stainless or mixed‑metal assemblies, though galvanic considerations should be reviewed for dissimilar metals. Can the inserts be used for both repair and new production? The design is suitable for thread repair and for strengthening threads in new components where standardised internal threads and improved wear resistance are required. Does the pack size support small series production? A pack of 100 pcs is intended to support small to medium series production and routine maintenance without frequent reordering. What does the tolerance ISO 2 (6H) indicate for fit? The ISO 2 (6H) tolerance denotes a tighter internal thread class that promotes a secure fit with standard bolts while reducing play and improving torque transmission in assembled joints. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, standard-compliant repair solution that combines stainless steel durability with a 1.5×D insert length for secure thread engagement; the kit supplies 10 inserts to restore M12 x 1.75 threads and keeps workshops running with minimal downtime — order directly via Metav Werkzeuge or consult our specialists for specification advice. V-Coil Thread Repair Kit M12 x 1.75 mm (stainless steel, 1.5×D) by VÖLKEL A V-Coil Thread Repair Kit designed to restore and reinforce M12 x 1.75 threads in stainless steel components according to DIN 8140, suitable for maintenance and repair tasks in mechanical workshops and industrial settings DIN 8140 compliant inserts Made from stainless steel for corrosion resistance Includes 10 inserts per kit 1.5×D length for secure engagement Restore stripped threads quickly and reliably The V-Coil thread repair kit provides a practical method for restoring stripped or damaged internal threads without replacing entire components. Designed for the common M12 x 1.75 mm pitch, the wire thread inserts recreate the original thread form and distribute loads across the parent material, reducing stress concentrations. This approach saves time and material costs by enabling repairs in situ rather than full part replacement. The thread repair system is particularly valuable where component reusability and structural integrity matter, for example in assemblies where downtimes need to be minimised. Durable stainless steel inserts for long-lasting performance Constructed from stainless steel, the inserts deliver enhanced corrosion resistance and maintain mechanical strength under cyclic loads. The specified 1.5×D insert length ensures sufficient thread engagement and reliable load transfer into the host material, improving fatigue resistance compared with worn threads. Each kit contains 10 inserts, making it convenient for routine maintenance or small-batch repair tasks. Where components operate in humid or corrosive environments, the material choice helps preserve the repaired thread over time, supporting consistent assembly and operational safety. Standardised specification for predictable workshop results Compliance with DIN 8140 provides a clear technical reference that simplifies procurement and quality assurance. Using a recognised standard means technicians and buyers can source compatible wire thread inserts with confidence and document repairs consistently across multiple sites. The compact kit format suits workshop shelves and service vehicles, enabling quick access when a repair is required. By standardising on familiar insert types and sizes, inventory management becomes more efficient and spare-part planning more reliable, supporting uninterrupted production workflows. For dependable thread restoration and fast product availability, request the V-Coil kit from Metav Werkzeuge or contact Metav’s technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and supply options. Technical Data Article number: 4000867012NW Description: Thread repair kit DIN 8140, M12 x 1.75 mm, stainless steel, 1.5×D V-COIL Manufacturer: VÖLKEL GmbH Facts Thread size: M12 x 1.75 mm Insert length: 1.5×D Inserts per kit: 10 Material: stainless steel Standard: DIN 8140 Special features V-Coil wire thread insert system Designed for thread restoration Packaging unit: 1 kit SKU/UID: 4000867012NW FAQ What thread size does the kit restore? The kit restores M12 x 1.75 mm internal threads using V-Coil wire thread inserts designed for that pitch. How many inserts are included in the kit? The kit contains 10 inserts, supplied as a single repair set to cover multiple repair operations. Is the insert material suitable for corrosive environments? Yes, the inserts are made of stainless steel, offering improved corrosion resistance for use in harsher conditions. What does 1.5×D mean for insert length? 1.5×D indicates the insert length is one and a half times the nominal thread diameter, providing dependable thread engagement and load distribution. Does the kit comply with an industry standard? The wire thread inserts in this kit conform to DIN 8140, ensuring standardised dimensions and predictable performance (SKU 4000867012NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable restoration of stripped metric threads is ensured by the combination of DIN 8140 compliance and stainless steel V‑COIL inserts; the compact kit contains 10 inserts sized for M14 x 1.25 threads, making it a practical, durable choice for maintenance and repair tasks. Order the thread repair kit directly via Metav Werkzeuge or consult the specialists for application advice. V‑COIL Thread Repair Kit M14 x 1.25 — stainless steel, DIN 8140 The V‑COIL thread repair kit is designed to restore damaged M14 x 1.25 metric threads in components where DIN 8140 conformity and corrosion resistance are required DIN 8140 compliant inserts Stainless steel V‑COIL construction M14 x 1.25 metric thread size Kit contains 10 inserts Restore load‑bearing threads with certified inserts A repair set built to industrial standards reduces downtime and avoids full component replacement. The V‑COIL system provides a predictable thread form that meets DIN 8140, ensuring restored threads regain rated strength and dimensional accuracy. Because the inserts are manufactured for metric threads, compatibility with M14 x 1.25 fastenings is guaranteed, and the 1.5×D length supports a reliable thread engagement depth for load‑bearing joints. This approach saves time in production and maintenance by returning parts to serviceable condition without overhauling assemblies. Durable performance and corrosion resistance for long service life Constructed from stainless steel, the inserts offer corrosion resistance in demanding environments, reducing the risk of seizing or galling in stainless assemblies. The short, robust design with 1.5×D engagement provides a high shear area while keeping the repair discreet and flush with the parent material. As a result, repaired connections maintain mechanical integrity under vibration and cyclic loads, which is especially relevant for machinery, plant equipment and assemblies exposed to moisture or corrosive atmospheres. Practical kit tailored for workshop use and rapid repair The compact set simplifies logistics for maintenance departments by supplying a ready batch of 10 inserts in a single packaging unit. The kit supports efficient workflow: technicians can select the correct V‑COIL insert for an M14 x 1.25 thread and complete the repair with common tools used in thread restoration. Documentation of DIN 8140 conformity provides procurement and quality teams with traceable standards, while the standardised thread form facilitates interchangeability and long‑term serviceability across assemblies. For reliable thread restoration with stainless steel V‑COIL inserts, contact Metav Werkzeuge in Emmerich for fast supply and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000867002NW SKU / UID: 4000867002NW Manufacturer: VÖLKEL GmbH Facts Thread size: M14 x 1.25 Number of inserts: 10 Length: 1.5×D Materials & special features Material: stainless steel Standard: DIN 8140 System: V‑COIL inserts FAQ What thread size does the kit repair? The V‑COIL thread repair kit restores M14 x 1.25 metric threads and is designed to re‑establish standard thread form in accordance with DIN 8140. How many inserts are included in the kit? The kit contains 10 inserts, supplied as a single packaging unit for workshop convenience. What material are the inserts made from? The inserts are manufactured from stainless steel, offering increased corrosion resistance for repairs in demanding environments. Is the kit suitable for load‑bearing applications? Yes — the combination of DIN 8140 conformity and a 1.5×D engagement length provides restored threads with reliable load capacity for many industrial uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Durable, standard-compliant thread reinforcement that combines stainless steel corrosion resistance with precise ISO 2 (6H) tolerance for repeatable assembly and long service life; order via Metav Werkzeuge or consult our specialists for selection advice. Thread insert DIN 8140 – V-COIL (stainless steel, M3 x 0.5, 2.0×D) A standardised thread insert designed for repair and strengthening of M3 x 0.5 threads in industrial and workshop applications. DIN 8140 standardised thread insert Made from stainless steel for corrosion resistance ISO 2 tolerance (6H) for precise fit Pack of 100 for workshop replenishment Consistent strength and corrosion resistance for threaded joints The insert delivers repeatable load-bearing capacity thanks to its DIN 8140 compliance and stainless steel construction. Manufactured to an ISO 2 (6H) tolerance, it ensures a predictable seating and torque behaviour in tapped components, reducing the need for rework and minimising downtime. Where thread repair or reinforcement is required, the helical insert restores thread cross-section and distributes loads more evenly, extending component life without costly re-machining. Precise engagement length for secure assembly With a nominal length of 2.0×D and a metric thread of M3 x 0.5, the insert provides the engagement necessary for reliable fastening in light to medium-duty assemblies. The dimensional specification 2.0×D indicates twice the nominal diameter as insert length, offering sufficient thread overlap to achieve rated strength while remaining compact for confined spaces. The controlled geometry supports consistent tool interactions during installation, which benefits production repeatability and quality control. Practical packaging and installation characteristics for workshops Supplied in a batch quantity of 100 pcs, the product supports continuous replenishment for small to mid-sized workshops and maintenance departments. The free-running design aids rapid installation and reduces the risk of cross-threading during assembly operations. Branded under V-COIL, these inserts are suited to both repair tasks and new-build components where corrosion resistance and standard conformity are priorities, ensuring long-term performance in mixed-material assemblies. For supply and technical guidance on V-COIL stainless steel inserts, contact Metav Werkzeuge for tailored recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000867633NW Label: Thread insert DIN 8140 Type Standard for M3 x 0.5 mm stainless steel 2.0×D 100 pcs V-COIL Manufacturer: VÖLKEL GmbH Facts Thread: M3 x 0.5 mm Standard: DIN 8140 Nominal length: 2.0×D Tolerance: ISO 2 (6H) Pack size: 100 pcs Materials & Features Material: stainless steel Type: Standard Free-running design Brand: V-COIL FAQ What materials are compatible with these inserts? The thread insert is manufactured from stainless steel and is suitable for use in components where corrosion resistance is required; compatibility depends on parent material and application conditions when using the V-COIL thread insert (SKU 4000867633NW). How does the ISO 2 (6H) tolerance affect assembly? An ISO 2 (6H) tolerance delivers a precise internal fit that promotes consistent torque values and repeatable seating, ensuring reliable performance of the V-COIL insert in lined or repaired threads. What does 2.0×D mean for insert selection? A nominal length of 2.0×D means the insert length equals twice the nominal diameter, providing sufficient engagement for secure fastening while keeping the insert compact for typical workshop applications. Are these suitable for both repair and new assemblies? Yes; the standardised design and stainless steel construction make the insert appropriate for thread repair and for reinforcing new assemblies where a robust, corrosion-resistant thread is required. Is this product supplied ready for immediate installation? The V-COIL thread inserts are supplied in a pack of 100, with a free-running design to facilitate installation without additional modification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a DIN 8140-compliant repair solution made from stainless steel that restores damaged metric threads and delivers consistent, workshop-grade repeatability; order the V‑COIL thread repair kit directly via Metav Werkzeuge or consult our specialists for specification advice. V‑COIL Thread Repair Kit M3×0.5 — stainless steel, 20 inserts The V‑COIL Thread Repair Kit M3×0.5 is a DIN 8140-compliant insert set designed to restore damaged M3 internal threads reliably in a production or repair environment. DIN 8140 compliant repair inserts Stainless steel insert material 1.5×D standard length inserts 20 V‑coils per set Restore thread strength quickly The insert set enables efficient reinstatement of worn or damaged internal threads by recreating the original thread geometry; the V‑COIL design distributes load across a larger surface area, reducing local stress and prolonging component service life. Where internal threads have become stripped or fatigued, the repaired thread achieves a reliable mechanical joint without resorting to larger fasteners or component replacement, supporting uninterrupted production and lower lifecycle costs. Long-term corrosion resistance and performance Manufactured from stainless steel, the inserts provide improved resistance to corrosion compared with standard steel repairs, which helps maintain clamp force and dimensional stability in humid or chemically exposed environments. The use of stainless inserts also mitigates fretting and galvanic effects when paired with compatible materials, offering a maintenance-friendly solution that preserves assembly integrity over time. Fast fitting with standard workshop tooling The set is specified as 1.5×D, indicating the insert length equals one and a half times the nominal diameter, which simplifies planning for drill and tap sequences. Installation requires a matched tap and an insertion tool; by following standard workshop procedures for thread repair, technicians achieve a consistent fit. The compact insert geometry supports repeatable installation, reducing machine downtime and making it suitable for both maintenance bays and small-series production. Conformity and measurable quality Compliance with DIN 8140 standardises dimensions and tolerances, ensuring interchangeability and traceable quality across batches. The set contains 20 precision-manufactured inserts, facilitating multiple repairs from a single kit and enabling predictable inventory management. Technical consistency like this supports quality assurance processes and simplifies documentation for audit or certification purposes. For DIN 8140-compliant thread restoration with workshop-ready reliability, request the V‑COIL Thread Repair Kit from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for detailed specifications and ordering information Technical information Article number: 4000867003NW SKU: 4000867003NW Description: Thread repair kit DIN 8140, M3×0.5, stainless steel, 1.5×D Packaging unit: 1 Core data Thread size: M3 × 0.5 Insert length: 1.5×D Number of inserts: 20 Standard: DIN 8140 Materials and features Material: stainless steel System: V‑COIL insert Type: standard repair insert set FAQ What does the kit contain? The V‑COIL Thread Repair Kit M3×0.5 contains 20 stainless steel V‑COIL inserts intended for thread restoration (SKU 4000867003NW). To which standard does the insert set conform? The insert set is manufactured to DIN 8140, ensuring standardised dimensions and compatibility with industry taps and installation tools. What does 1.5×D mean for the inserts? 1.5×D denotes the insert length equal to one and a half times the nominal diameter, providing guidance for tap depth and insertion procedures. Are tools included in the set? The kit supplies the V‑COIL inserts only; matching taps and insertion tools are required and should be selected according to DIN 8140 recommendations and workshop practice. Can the inserts be used for repeated repairs? Yes, the set of 20 inserts allows multiple repair operations; consistent insert quality supports repeatable results when installed with appropriate tooling and technique. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of standard-compliant thread inserts that combine corrosion resistance and precise tolerances for reliable small-thread assemblies; order directly via Metav Werkzeuge or consult the technical team for application guidance. V-COIL Thread Insert DIN 8140 — Standard Type, M3 x 0.5 mm, Stainless Steel The V-COIL thread insert for fine metric threads, designed to provide standardised, corrosion-resistant internal threads for applications where repeatable performance is essential. DIN 8140 standardised geometry Stainless steel construction for corrosion resistance ISO 2 (6H) tolerance for precise fit Pack of 100 inserts for efficient stock management Durable corrosion resistance for long-lasting small threads The insert is manufactured from stainless steel and conforms to DIN 8140, giving a robust internal thread that resists corrosion in demanding environments. This material choice reduces the risk of seizure and galvanic issues in mixed-metal assemblies while maintaining mechanical integrity. The continuous thread design ensures uninterrupted engagement along the insert length, supporting consistent torque transmission and reducing the likelihood of thread failure in delicate M3 applications. Precise tolerances that protect assembly quality With an ISO 2 (6H) tolerance and nominal length specified as 1.0×D, the insert establishes a repeatable, accurate mating surface for fasteners. Such precision minimises play and the potential for cross-threading, which is particularly important in small-scale assemblies where component variation is limited. The standardised geometry simplifies process qualification in production environments and facilitates interchangeability across batches and suppliers. Practical stock solution that lowers downtime Supplied in a pack of 100, this standard-type insert streamlines inventory handling for workshops and small production runs. The freely through-running design allows quick installation and consistent thread properties across multiple components, cutting assembly time and reducing machine or operator interruptions. Keeping a standardised stock of these inserts supports leaner workflows and fewer emergency procurement steps. Suitable uses and compatibility in fine-thread assemblies Engineered for metric fine threads such as M3 x 0.5 mm, the insert is appropriate for precision housings, control electronics enclosures and other small assemblies requiring reliable internal threads. The product’s conformity with DIN 8140 and its stainless-steel construction make it a sensible choice where corrosion resistance and dimensional conformity are required. For installations requiring a recognised coil-style insert system, the V-COIL format delivers a balance of serviceability and mechanical reliability. For reliable, standard-compliant M3 thread reinforcement and seamless supply, contact Metav Werkzeuge to order V-COIL inserts or request detailed technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000867626NW Product: Thread insert, DIN 8140, Type Standard Brand: V-COIL Manufacturer: VÖLKEL GmbH Core specifications Thread size: M3 x 0.5 mm Nominal length: 1.0×D Tolerance: ISO 2 (6H) Pack unit: 100 pieces Materials & features Material: stainless steel Standard: DIN 8140 Type: Standard Free-running (continuous) thread FAQ What thread size and pitch does this insert suit? The insert is specified for an M3 x 0.5 mm metric fine thread and follows the DIN 8140 geometry for consistent fit. How long is the insert relative to the nominal diameter? The nominal length is 1.0×D, providing the intended engagement length for secure fastening in small-thread applications. Is the material suitable for corrosive environments? Yes. The stainless steel construction of the V-COIL insert offers enhanced corrosion resistance compared with standard steel inserts. What tolerance class ensures interchangeability? The insert is manufactured to ISO 2 (6H) tolerance, ensuring precise and repeatable mating with standard bolts and screws. How many inserts are supplied per pack? The item is supplied in a pack of 100, enabling efficient replenishment and reduced frequency of reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of DIN 8140 conformity, stainless steel corrosion resistance and a 1.5×D nominal length to ensure durable, repeatable internal threads; order directly via Metav Werkzeuge or request technical advice from the Metav consultants. V‑COIL Thread Insert DIN 8140 — Standard type, stainless steel, for M3 x 0.5 V‑COIL thread insert DIN 8140 designed for creating and restoring metric internal threads in accordance with industrial standards, suitable for precision assembly and repair applications. Free-running insert to DIN 8140 Stainless steel for corrosion resistance ISO 2 tolerance (6H) for consistent fit 1.5×D nominal length for secure threads Industrial-standard threads for reliable assembly Built to DIN 8140, the V‑COIL thread insert provides a standardised internal thread form that supports consistent assembly processes. The use of stainless steel gives corrosion-resistant performance in humid or exposed environments and contributes to long-term retention of clamping forces. Specified for M3 x 0.5 metric threads, the component meets a recognised international norm, which simplifies parts ordering and ensures interchangeability across production batches. Improved engagement and fatigue resistance through 1.5×D design The 1.5×D nominal length increases the engagement length between bolt and insert, which improves connection security and reduces the likelihood of thread pull‑out under dynamic loads. The free-running design minimises installation torque variation and allows controlled bolt insertion. Together with ISO 2 (6H) tolerance, these attributes support repeatable torque settings and reduce rework in serial production, delivering measurable gains in assembly efficiency. Installation benefits and process integration Installation is compatible with standard insertion tools and follows typical insert fittings for metric threads; the component is intended to be installed where a standardised internal thread form and V‑COIL marking are required. The precise tolerance class ensures reliable mating with bolts manufactured to the same metric specification. As a result, maintenance intervals are extended and assembly lines benefit from reduced rejects and faster inspection routines without the need for bespoke tooling. Supply reliability and partner assurance Sourcing from a structured supply chain supports uninterrupted production. Metav acts as a quality filter for the European market and offers a centralised procurement route that reduces supplier complexity. Over time, Metav’s catalogue and service model have helped numerous workshops and manufacturers to secure consistent results, backed by clear product data and reliable logistics. For specification sheets, ordering details or tailored advice on the V‑COIL thread insert, contact Metav Werkzeuge — Metav’s consultants will provide fast, application-focused guidance and procurement support. Technical Data Article number: 4000867637NW Item label: Thread insert DIN 8140, standard type, for M3 x 0.5, stainless steel, 1.5×D, V‑COIL Facts Nominal length: 1.5×D Thread size: M3 x 0.5 Tolerance: ISO 2 (6H) Packaging unit: 100 pieces Special features Material: stainless steel Standard: DIN 8140 Type: Standard Free-running design V‑COIL designation FAQ Is this insert compatible with standard M3 bolts? Yes. The thread insert is specified for M3 x 0.5 threads and produced to DIN 8140, ensuring compatibility with bolts manufactured to the same metric standard. What advantage does the 1.5×D length provide? The 1.5×D nominal length increases thread engagement, improving resistance to pull‑out and enhancing load distribution in the connection. Does the insert resist corrosion? The insert is made from stainless steel, providing corrosion-resistant properties suitable for many industrial environments where moisture or oxidation might otherwise be a concern. How precise is the fit of the insert? Tolerance is ISO 2 (6H), offering a consistent and precise internal thread suitable for repeatable assembly and reduced variation in torque values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a corrosion‑resistant, DIN‑compliant thread repair that delivers consistent thread quality and simple inventory handling; the combination of stainless steel construction and ISO 2 (6H) tolerance supports reliable assembly processes. Order these inserts directly via Metav Werkzeuge or consult the team for technical guidance. V‑COIL thread insert M4×0.7 (DIN 8140) — stainless steel, standard type A V‑COIL thread insert M4×0.7 designed to create durable internal threads in through‑hole applications, conforming to DIN 8140 for industrial and maintenance use. DIN 8140 compliant insert, standard type Made from corrosion‑resistant stainless steel Tolerance ISO 2 (6H) for precise fit Pack of 100 inserts, 1.0×D length Reliable threaded connections for repeatable production The helical insert offers a proven way to restore or create internal threads that resist wear and corrosion. Made from stainless steel, the component maintains mechanical integrity in demanding environments, while conformity with DIN 8140 ensures compatibility with established tapping and fastener standards. The specified ISO 2 (6H) tolerance promotes consistent engagement with mating bolts, reducing variance in assembly torque and helping to maintain process stability in production runs. Practical installation and dimensional clarity With a nominal length of 1.0×D and an internal size of M4×0.7, the insert is suited to through‑hole applications where a full‑depth, free‑running thread is required. The geometry supports standard installation techniques for coil inserts, and the defined dimensions facilitate straightforward planning for tool selection and hole preparation. Clear specifications minimise setup time and permit accurate cycle time calculations for both repair and serial assembly tasks. Packaged for operational efficiency and stock control Supplied as a standard pack, these inserts streamline ordering for workshops and maintenance departments by aligning supply with recurring needs. Consistent batch specification and material choice reduce the risk of incompatible parts entering the workflow, contributing to lower rework rates and less production downtime. The standard format also simplifies catalogue management and supplier consolidation for purchasing departments. Suitable uses and operational benefits The coil insert serves both repair and new‑build scenarios: it increases thread life in softer base materials, mitigates stripping under repeated service, and provides a corrosion‑resistant interface in assemblies exposed to moisture or mild chemicals. By choosing a DIN‑specified, stainless solution from the V‑COIL range, maintenance teams gain a durable component that helps protect higher‑value parts and supports predictable maintenance intervals. For supply enquiries or detailed application advice on V‑COIL thread inserts, contact Metav Werkzeuge GmbH for expert support and reliable delivery from Emmerich. Technical Data Article number: 4000867627NW SKU: 4000867627NW Facts Thread size: M4×0.7 Nominal length: 1.0×D Tolerance: ISO 2 (6H) Standard: DIN 8140 Special features Material: stainless steel Type: Standard Free‑running / through hole design Brand: V‑COIL FAQ What material is used for these thread inserts? The V‑COIL thread insert is manufactured from stainless steel, providing corrosion resistance and reliable mechanical performance. Which standard governs these inserts? These inserts conform to DIN 8140, ensuring compatibility with industry‑standard thread and tapping specifications. What does the designation 1.0×D mean for installation? The 1.0×D value indicates the nominal length equals one times the nominal diameter, which determines hole depth and insertion length for correct installation. Are these inserts suitable for through‑hole applications? Yes, the design supports through‑hole or free‑running threads for full‑depth engagement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a corrosion-resistant, DIN 8140-compliant thread repair solution that secures M4 connections with a nominal length of 1.5×D for improved load distribution; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. V-COIL thread insert DIN 8140 — M4 x 0.7, stainless steel, 1.5×D The V-COIL thread insert DIN 8140 is a free-running helical coil designed to restore and reinforce internal threads in light to medium-duty assemblies, meeting industry tolerances for reliable mechanical fastening Free-running helical insert to DIN 8140 Stainless steel for corrosion resistance ISO 2 (6H) tolerance for precise fit Nominal length 1.5×D for secure engagement Reliable thread reinforcement for durable assemblies A helical thread insert provides a practical way to repair worn or damaged threads and to strengthen new female threads where base materials are softer than the fastener. The use of a stainless steel coil distributes clamping loads more evenly than direct tapping into the parent material, reducing local stress and increasing joint longevity. Specified for M4 x 0.7, this solution is suitable where consistent clamping force and repeatability matter in production and maintenance environments. Standard conformity that simplifies design and inspection Compliance with DIN 8140 and a declared tolerance of ISO 2 (6H) gives clear dimensional expectations and simplifies quality checks during incoming inspection. The specified tolerance class ensures a defined internal thread fit for common metric fasteners, reducing ambiguity in drawing specifications and easing interchangeability. For procurement and engineering teams, this standardised approach saves time in design validation and supports predictable assembly performance. Material selection for environmental resistance Manufactured from stainless steel, the insert offers enhanced corrosion resistance compared with untreated inserts, which is particularly valuable for components exposed to humidity or mild corrosive atmospheres. The metallic composition also preserves mechanical properties at fastening points and is compatible with common fastener materials, helping to avoid premature wear without compromising clamp integrity. Efficient packaging and consistent installation performance Delivered as a pack of 100, the coils are pre-sized to a nominal length of 1.5×D, providing sufficient engagement depth for M4 fasteners while keeping installation simple and repeatable. The free-running design facilitates insertion and alignment during assembly or repair tasks, reducing cycle time on workbenches and in service operations. For workshops and production lines, bulk packaging supports uninterrupted workflow and consistent component handling. For technical guidance on using V-COIL thread inserts in specific materials or assemblies, contact Metav Werkzeuge for availability and installation advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000867638NW Description: thread insert, DIN 8140, M4 x 0.7, V-COIL Manufacturer: VÖLKEL GmbH Facts Thread size: M4 x 0.7 Nominal length: 1.5×D Tolerance: ISO 2 (6H) Pack unit: 100 pieces Special features Material: stainless steel Standard: DIN 8140 Type: Standard Free-running helical insert Brand: V-COIL FAQ What thread size and pitch is this insert designed for? The V-COIL thread insert is specified for M4 x 0.7 threads, matching standard metric M4 fasteners and pitches. Which standard and tolerance does the insert comply with? This insert conforms to DIN 8140 and is manufactured to ISO 2 (6H) tolerance for consistent internal thread fit. What material is used for the insert and why is it beneficial? The coil is made from stainless steel, providing improved corrosion resistance and reliable mechanical behaviour at threaded connections. How long is each insert relative to the nominal diameter? Each insert has a nominal length of 1.5×D, ensuring adequate engagement for M4 fasteners and improved load distribution. How many inserts are supplied per package and what is the SKU? This article is supplied as a pack of 100 and is listed under SKU 4000867638NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a proven repair system that restores worn M4 threads quickly and reliably: stainless‑steel V‑Coil inserts ensure corrosion resistance and a secure fit, while DIN 8140 conformity guarantees industry compatibility; order directly via Metav Werkzeuge or consult the Metav team for supply and application advice. V‑Coil Thread Repair Kit M4x0.7 (DIN 8140) — Stainless Steel, 1.5xD V‑Coil Thread Repair Kit M4x0.7 for workshop and maintenance use, designed to restore damaged M4 threads with stainless‑steel inserts to the original thread form and strength Stainless‑steel V‑Coil inserts DIN 8140‑compliant repair system Includes 20 thread inserts Repair threads quickly while maintaining original strength The V‑Coil system provides a straightforward way to re‑establish stripped or damaged M4 threads. By installing a precisely formed coil insert into a correctly sized pilot hole, the original thread geometry and load‑bearing surface are effectively restored. The M4x0.7 size, combined with a 1.5xD insert length, delivers a balance between engagement length and compact installation, making the repair both robust and space‑efficient. For workshops seeking predictable outcomes, the coil method reduces the need for oversized fasteners and preserves component tolerances. Proven conformity and dependable batch performance Compliance with DIN 8140 ensures that each insert meets recognised dimensional and material criteria, which supports interchangeability and simplifies quality checks. The kit contains 20 inserts, enabling multiple repairs or stocking for routine maintenance tasks. Using stainless‑steel components improves resistance to corrosion and mechanical wear, which is particularly valuable in environments prone to humidity or mild chemical exposure. This predictable durability contributes to lower rework rates and steadier production uptime. Practical suitability for maintenance and light industrial applications The set is conceived for general workshop use and scheduled maintenance, where restoring threaded joints is preferable to component replacement. The V‑Coil inserts are suitable wherever M4 threads are required to regain original specification without changing mating parts. Installation requires standard coil insertion tooling and the correct tap size for the pilot hole; when applied correctly, the repair achieves consistent clamping performance and prolongs service life. For procurement and stock planning the compact kit format simplifies inventory management in maintenance stores. For procurement enquiries or technical clarification about the V‑Coil M4x0.7 kit, contact Metav Werkzeuge to arrange supply from our Emmerich centre or to discuss quantity needs at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000867004NW Description: V‑Coil thread repair kit M4x0.7, 1.5xD, stainless steel Manufacturer: VÖLKEL GmbH Packaging unit: 1 UID: 4000867004NW Facts Thread size: M4 x 0.7 Inserts per kit: 20 Insert length: 1.5xD Standard: DIN 8140 Special features V‑Coil system Material: stainless steel DIN 8140 compliant FAQ Is this kit suitable for repairing M4x0.7 threads? Yes. The V‑Coil Thread Repair Kit M4x0.7 is specifically designed for restoring M4 x 0.7 metric threads to their original form. How many repairs can be carried out with one kit? The kit contains 20 inserts, allowing for multiple repair operations depending on the number of inserts used per location. What does 1.5xD mean for the insert length? 1.5xD indicates an insert length equal to one and a half times the nominal thread diameter, which balances thread engagement and compact installation. Is the material corrosion‑resistant? The inserts are made from stainless steel, offering enhanced corrosion resistance compared with untreated alloys. Does the kit comply with industry standards? Yes. The repair system is compliant with DIN 8140, ensuring dimensional and performance compatibility with standardised thread‑repair procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of DIN 8140 conformity, stainless-steel corrosion resistance, and a practical pack of 100 for uninterrupted assembly processes; order the threaded insert directly via Metav Werkzeuge or ask our consultants if needed. V-COIL threaded insert DIN 8140 — Standard type for M4 x 0.7, stainless steel, 2.0xD The V-COIL threaded insert DIN 8140 is a stainless-steel standard insert designed to create robust M4 x 0.7 internal threads in thin-walled or pre-bored components, suited for industrial assembly and thread repair applications. DIN 8140 standard compliant insert Stainless steel construction, corrosion resistant ISO 2 tolerance (6H) for precision fit Pack of 100 inserts for production runs Consistent, standard-compliant threads for repeatable assemblies The insert is manufactured to the DIN 8140 specification and held to ISO 2 (6H) tolerance, which ensures a predictable thread geometry and interchangeability across production batches. Such dimensional consistency reduces variability in joint behaviour, helping planners and quality engineers maintain assembly tolerances and torque settings. The nominal length of 2.0xD provides full engagement for the M4 x 0.7 thread, delivering stable clamping forces where standard tapped holes would wear or strip over time. Faster insertion and reduced rework for production environments Featuring a free-running profile for through engagement, the component supports efficient insertion processes with fewer rejects and less rework. The free-running characteristic minimises alignment issues during automated or manual installation, while the pack of 100 supports uninterrupted production cycles and lowers setup frequency. This combination contributes to lower total assembly time per unit and a more economical production flow without sacrificing reliability. Corrosion resistance and suitability for stainless environments Constructed from stainless steel, the insert resists corrosion in humid or chemically exposed environments, making it appropriate for applications where surface longevity matters. The choice of material preserves the integrity of the mating thread and reduces maintenance intervals in assemblies exposed to corrosive atmospheres. The stainless composition also aligns with hygiene or aesthetic requirements where visible fastenings are used. Quality features that support process control and traceability Supplied under the V-COIL designation and packaged for consistent handling, the component supports straightforward inventory management and traceability. The standardised dimensions and material specification allow procurement and quality departments to integrate the parts into existing inspection plans and tool setups. Reliable repeatability at the component level translates to higher first-pass yields and a reduced risk of unscheduled downtime. For reliable, stainless-steel M4 thread inserts adhering to DIN 8140 and available in production-friendly packs, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification and ordering options. Technical data Article number: 4000867634NW SKU: 4000867634NW Packing unit: 100 pieces Core data Nominal size: 2.0xD Thread: M4 x 0.7 Tolerance: ISO 2 (6H) Standard: DIN 8140 Materials / Special features Material: stainless steel Type: Standard Profile: free-running (through) System: V-COIL FAQ What standard and tolerance does this insert meet? The V-COIL threaded insert is manufactured to DIN 8140 and specified to ISO 2 (6H) tolerance for consistent thread engagement. Which thread size and length are provided with this SKU? SKU 4000867634NW supplies M4 x 0.7 threads with a nominal length of 2.0xD, delivered as a pack of 100 inserts. What material is the insert made from and where is it suitable? The insert is made from stainless steel, suitable for applications requiring corrosion resistance and durable internal threads in metallic components. How does the free-running profile affect installation? The free-running profile enables uninterrupted thread engagement along the insert’s length, supporting reliable insertion and reducing alignment-related installation faults. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Gewindeeinsatz DIN 8140 Typ Standard für M5x0,8 aus rostfreiem Stahl Gewindeeinsatz DIN 8140 Typ Standard für M5x0,8 aus rostfreiem Stahl bietet eine robuste Lösung zur dauerhaften Reparatur und Verstärkung von Innengewinden in metallischen Bauteilen und Montageplatten. DIN 8140 konform Aus rostfreiem Stahl Toleranz ISO 2 (6H) Nennmaß 1,0xD Für M5x0,8 Einpressmontage Präzise Passform und Korrosionsschutz für sichere Verbindungen Der Gewindeeinsatz gewährleistet durch die Normkonformität DIN 8140 und die Toleranz ISO 2 (6H) eine hohe Austauschbarkeit und Vorhersagbarkeit in der Produktion. Anwender profitieren von einer konstanten Gewindegeometrie, die Montagezeiten reduziert und Nacharbeit minimiert. Die Verwendung von rostfreiem Stahl bietet zusätzlichen Korrosionsschutz, was insbesondere in feuchten oder chemisch belasteten Umgebungen die Lebensdauer der Verbindung deutlich erhöht. Einfache Integration in Fertigungsprozesse und Reparaturarbeiten Mit dem Nennmaß 1,0xD und der Gewindeangabe M5x0,8 lässt sich der Einsatz schnell in bestehende Prozesse einplanen. Die freie Durchlaufcharakteristik und das Standarddesign ermöglichen sowohl die Serienmontage als auch punktuelle Reparaturen ohne Sonderwerkzeuge. Dadurch sinkt der Aufwand für Vorrichtungen, und die Standzeit von Bauteilen wird erhöht, was die Gesamtproduktivität im Betrieb verbessert. Zuverlässigkeit, Anwendbarkeit und wirtschaftlicher Nutzen Das Produkt ist für den Einsatz in metallischen Werkstoffen spezifiziert und eignet sich besonders dort, wo dauerhafte, belastbare Verbindungen gefragt sind. Durch die Kombination aus Materialwahl und präziser Fertigung reduziert sich das Risiko von Gewindeversagen, was Instandhaltungskosten senkt und Ausfallzeiten verhindert. Die Anwendung ist sinnvoll in Maschinenbau, Apparatebau und Instandhaltung, wo belastbare Gewindeverbindungen die Betriebssicherheit erhöhen. Empfehlung: Vertrauen Sie auf die Qualität und Normtreue dieses Gewindeeinsatzes und nutzen Sie die Beratung und Lieferung durch Metav Werkzeuge GmbH für eine sichere Integration in den Produktionsablauf; Für technische Rückfragen: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 4000867628NW Marke: VÖLKEL GmbH Norm: DIN 8140 Typ: Standard Fakten Nennmaß: 1,0xD Gewinde: M5x0,8 Verpackungseinheit: 100 Besonderheiten Toleranz ISO 2 (6H) · Toleranzklasse für Gewinde rostfreier Stahl · Material für Korrosionsbeständigkeit frei durchlaufend · für einfache Montage V-COIL · Spiralgewindeeinsatz FAQ Wie wird der Gewindeeinsatz montiert? Der Gewindeeinsatz von VÖLKEL wird in das Mutterloch eingepresst oder eingedreht, je nach Anwendung, wobei das Nennmaß 1,0xD zu beachten ist. Für die Montage empfiehlt sich die Verwendung passender Einpress- oder Einschraubwerkzeuge, um die korrekte Positionierung und den optimalen Sitz sicherzustellen. Für welche Werkstoffe ist dieser Einsatz geeignet? Der Gewindeeinsatz ist aus rostfreiem Stahl gefertigt und eignet sich insbesondere für metallische Werkstoffe, wo Korrosionsbeständigkeit und mechanische Belastbarkeit gefordert sind. Die Norm DIN 8140 und die ISO-Toleranz sorgen für zuverlässige Ergebnisse in typischen Fertigungsumgebungen. Welche Vorteile bietet die Toleranz ISO 2 (6H)? Die Toleranz ISO 2 (6H) garantiert eine enge Maßhaltigkeit und damit eine hohe Austauschbarkeit mit standardisierten Schrauben. Das reduziert Ausschuss und vereinfacht die Montageplanung in Serienfertigung und Reparatur. Warum lohnt sich die Nutzung dieses Gewindeeinsatzes in der Produktion? Durch die Normkonformität, das Material und die definierte Geometrie sinkt das Risiko von Gewindeversagen, was Wartungsintervalle verlängert und Ausfallzeiten reduziert. Anwender erzielen damit bessere Gesamtanlageneffektivität bei geringeren Instandhaltungskosten. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of stainless steel durability, conformity to DIN 8140, and the space-saving nominal length of 2.0×D for reliable M5 x 0.8 assemblies; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. V-COIL Thread Insert DIN 8140 — Standard Type, M5 x 0.8, Stainless Steel, 2.0×D (100 pcs) The V-COIL thread insert DIN 8140 standard type secures corrosion-resistant internal threads for repairs and new assemblies, engineered for M5 x 0.8 fastening applications. DIN 8140 standard internal thread insert Stainless steel construction for corrosion resistance ISO 2 (6H) tolerance for precision fit Pack of 100, nominal length 2.0×D Durable stainless steel threads for long service life The use of stainless steel provides high resistance to corrosion and wear, making these inserts a practical choice for environments where longevity matters. Conformity with DIN 8140 guarantees a recognised geometry for threaded repairs and production parts, while the designation M5 x 0.8 specifies the exact metric thread profile expected in standard fastenings. This combination reduces failure rates in assemblies and extends maintenance intervals, supporting uninterrupted production and fewer repeat repairs. Precision tolerance and nominal length ensure consistent assembly A declared tolerance of ISO 2 (6H) delivers a reliable internal fit that matches mating bolts and screws with predictable clearance and repeatability. The nominal length of 2.0×D (two times the nominal diameter) balances thread engagement and material economy: sufficient engagement for secure load transfer while limiting insertion depth. The free-running coil design maintains full thread continuity through the hole, improving torque distribution and simplifying torque‑to‑yield calculations in engineering documentation. Efficient stocking and quick repair turnaround for workshops Supplied in sets of 100 pcs, these DIN‑compliant inserts support efficient spare-part management and reduce procurement cycles for maintenance departments. The V-COIL format is suitable for both repair and series production, enabling quick reinstatement of stripped threads or the creation of durable female threads in new components. For workshops and production teams seeking dependable thread reinforcement with minimal inventory overhead, this insert type offers a practical, standards‑based solution. Contact Metav Werkzeuge for specialist advice and secure supply of V-COIL thread inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU 4000867635NW Label V‑COIL thread insert DIN 8140 Standard M5 x 0.8 stainless steel Facts Thread size M5 x 0.8 Nominal length 2.0×D Tolerance ISO 2 (6H) Pack size 100 pcs Special features DIN 8140 standard Stainless steel material Free-running coil design Type: Standard Series: V-COIL FAQ What material are these inserts made from? The inserts are manufactured from stainless steel, providing corrosion resistance and long service life for the V-COIL thread insert. What does 2.0×D nominal length mean? A nominal length of 2.0×D indicates the insert length equals twice the nominal diameter, offering reliable thread engagement for M5 x 0.8 fastenings. Which standard governs the geometry of these inserts? The inserts conform to DIN 8140, ensuring standardised dimensions and interchangeability in industrial applications. Are these suitable for repair of stripped threads? Yes, the V-COIL thread insert is designed for both repair and new thread creation, restoring stripped holes to a durable internal thread. What is the SKU for ordering and reference? The SKU for this item is 4000867635NW, helpful for ordering or specifying the exact insert type. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining stainless steel construction with DIN 8140 precision and an ISO 2 tolerance, these V‑COIL thread inserts provide durable, accurately pitched M5x0.8 internal threads for reliable assemblies. The nominal 1.5×D length and pack size of 100 support efficient production runs and reduced downtime. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. V‑COIL thread insert M5x0.8 by VÖLKEL — stainless steel, DIN 8140 A V‑COIL thread insert M5x0.8 designed to create or repair high-quality internal threads with lasting retention and corrosion resistance for industrial and workshop use. DIN 8140 wire thread insert V‑COIL Stainless steel, corrosion-resistant Tolerance ISO 2 (6H) for precise fit Pack of 100, nominal 1.5×D length Reliable thread retention for robust assemblies A wire thread insert manufactured to DIN 8140 offers consistent load distribution and improved fatigue strength compared with raw tapped threads. The stainless steel construction resists corrosion while maintaining mechanical stability, so assemblies experience fewer failures and less rework. With the specified ISO 2 (6H) tolerance, mating fasteners run true and repeatably engage, which reduces alignment issues during assembly and supports quality control procedures in production environments. Fast installation and assured interchangeability Designed as a free-running V‑COIL, the insert installs quickly into a prepared tapped hole and delivers an immediate internal M5x0.8 thread ready for standard screws and bolts. The nominal length of 1.5×D provides a compact yet secure engagement suitable for constrained component geometries. Because the insert conforms to established standards, interchangeability is ensured across components and suppliers, simplifying maintenance routines and spare-part management — a clear efficiency gain for busy workshops and production lines. Corrosion resistance and long service life The choice of stainless steel for the V‑COIL element means enhanced resistance to oxidation and environmental exposure, contributing to longer service intervals and predictable performance. In batch use, the pack of 100 supports continuous workflows and reduces ordering frequency. Combined with Metav’s established supply chain and quality filtering at the Emmerich site, this insert is positioned as a dependable component for applications where operational continuity and part traceability matter. For a reliable supply from our Emmerich warehouse and advice on selecting the correct insert geometry, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the V‑COIL thread insert M5x0.8 and compatibility with specific assemblies Technical data Article number: 4000867639NW Product name: V‑COIL thread insert M5x0.8 (VÖLKEL) Manufacturer: VÖLKEL GmbH Pack unit: 100 Facts Thread size: M5 × 0.8 Nominal length: 1.5×D Tolerance: ISO 2 (6H) Quantity per pack: 100 pieces Special features Material: stainless steel Standard: DIN 8140 Type: Standard V‑COIL wire insert Free through-running design FAQ How does the V‑COIL insert increase assembly reliability? The V‑COIL thread insert M5x0.8 (SKU 4000867639NW) distributes load over a larger area than a bare tapped thread, improving fatigue resistance and reducing the risk of thread wear or pull‑out in repeated assembly cycles. Is this insert compatible with standard M5 fasteners? Yes. The V‑COIL thread insert M5x0.8 is manufactured to DIN 8140 and an ISO 2 (6H) tolerance, ensuring compatibility with standard M5 × 0.8 bolts and screws that conform to the same thread specifications. What does the nominal 1.5×D length mean for installation? A nominal length of 1.5×D indicates the insert provides one and a half times the thread diameter in engaged length; for these M5 inserts this offers a compact, secure engagement that is suitable where installation depth is limited. Can these inserts be used where corrosion resistance is required? Yes. The V‑COIL insert is made from stainless steel, offering improved corrosion resistance compared with untreated steel inserts, making it suitable for applications where environmental exposure is a concern. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of stainless steel durability, DIN 8140 conformity and a practical pack of 20 thread inserts to restore or reinforce M5×0.8 metric threads with minimal downtime; order directly via Metav Werkzeuge or contact our consultants for application advice. V-COIL Thread Repair Kit M5 x 0.8 mm — stainless steel, 1.5×D V-COIL Thread Repair Kit for restoring or strengthening M5 x 0.8 mm metric threads in mechanical components and assemblies DIN 8140 compliant thread repair Stainless steel inserts for corrosion resistance 20 ready-to-use thread inserts 1.5×D length for secure engagement Restore damaged threads reliably and to standard The kit follows DIN 8140, ensuring replacement inserts meet established dimensional and functional requirements. Each stainless steel insert restores the original thread geometry for M5 x 0.8 mm connections, providing consistent load distribution and improved wear resistance. The 1.5×D length specification increases engagement depth compared with short inserts, which helps to maintain clamping forces over repeated assemblies. This technical reliability reduces the risk of recurring failures and supports predictable maintenance planning in production environments. Cut maintenance time and simplify inventory management Supplied as a pack of 20 thread inserts, the set reduces the frequency of small reorders and makes workshop stocking more efficient. The standard M5 x 0.8 mm size covers a wide range of fastening applications commonly found in fixtures, panels and machine housings; having a ready set on hand shortens repair cycles and limits machine downtime. The compact packaging unit supports central procurement and rapid dispatch from Metav’s logistics hub, helping to keep operations running without unnecessary interruptions. Reinforce assemblies without redesign Thread inserts provide a durable metal-to-metal bearing where original threads are worn, stripped or made from softer materials. By installing a threaded coil, the base component regains its original screw-retaining capability and often outperforms the original thread in terms of fatigue and wear. The V-COIL system is engineered for repeatable engagement and ease of use in repair scenarios, offering a practical alternative to part replacement and minimising scrap rates on production lines. Corrosion resistance and long-term performance Made from stainless steel, the inserts resist oxidation and maintain mechanical properties in humid or mildly corrosive environments. Compliance with DIN standards adds an extra layer of quality assurance, supporting interchangeability and acceptance in regulated manufacturing contexts. Selecting corrosion-resistant inserts protects bolted connections and contributes to extended service intervals, which is particularly valuable for assemblies exposed to environmental or cleaning agents. Speak with Metav Werkzeuge for tailored advice on the V-COIL thread repair kit — our consultants can confirm suitability for specific assemblies and support ordering from Emmerich for fast delivery Technical Data Article number: 4000867005NW Description: V-COIL thread repair kit M5 x 0.8 mm Brand: VÖLKEL GmbH Facts Thread size: M5 x 0.8 mm Number of inserts: 20 Insert length: 1.5×D Standard: DIN 8140 Packaging unit: 1 Special features Material: stainless steel System: V-COIL Type: Stand Designed for thread restoration and reinforcement FAQ What thread size is included in the kit? The kit contains inserts for M5 x 0.8 mm threads suitable for standard metric fasteners. How many inserts are supplied in one pack? Each pack includes 20 thread inserts for multiple repairs or preventive stocking. Are the inserts corrosion resistant? Yes, the inserts are made from stainless steel to provide corrosion resistance in common industrial environments. Does the product meet industry standards? The V-COIL thread repair kit is specified to DIN 8140 to ensure dimensional and functional conformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combines corrosion-resistant stainless steel inserts with a DIN 8140‑compliant design to restore metric threads from M5–M12 with a 1.5×D engagement for long‑lasting repairs. Order directly from Metav Werkzeuge or consult the advisors for specification support. V-COIL Thread Repair Kit DIN 8140 M5–M12, Stainless Steel, 1.5×D V-COIL Thread Repair Kit DIN 8140 M5–M12 is a stainless‑steel insert system for restoring and reinforcing metric threads in damaged or worn components across workshop and industrial applications V-COIL system for durable thread restoration Stainless steel inserts, corrosion-resistant Conforms to DIN 8140 standard Coverage from M5 to M12, 1.5×D engagement Restore stripped threads quickly to avoid production stops The V‑COIL Thread Repair Kit offers a pragmatic repair method that restores worn threads to specification, reducing the need for part replacement and downtime. The helically wound thread insert is engineered to re‑establish a precise internal thread profile for sizes M5–M12, delivering a repeatable fit. Using a 1.5×D engagement length increases contact area and improves pull‑out resistance, which is vital when parts are subject to repetitive assembly or elevated loads. Consistent, measurable performance in line with standards The kit is manufactured in stainless steel and designed to meet DIN 8140, ensuring consistent geometry and tolerance adherence for replaced threads. The V‑shaped coil geometry converts shear stresses into compressive contact over the parent material, enhancing load distribution and fatigue resistance compared with makeshift repairs. Where specification conformity matters, this standard alignment simplifies inspection and documentation in maintenance records. Practical benefits for workshop and maintenance teams Adopting this insert system streamlines repairs without extensive rework: worn bores are reinstated with repeatable torque acceptance and reduced scrap rates. The robust construction supports applications that demand corrosion resistance and a durable mating surface. For complex assemblies or high‑value components, technical guidance is available from Metav Werkzeuge to help select the correct insert size and installation technique, supporting efficient maintenance planning and documentation. Long‑term reliability backed by dependable supply Made from corrosion‑resistant materials, the inserts provide a durable solution that helps extend component life and lower life‑cycle costs through fewer part replacements. Metav’s emphasis on accessible precision and supply reliability ensures that this V‑COIL solution can be sourced and supported consistently. Confidence in ongoing availability and technical support further reduces operational risk in scheduled and unscheduled maintenance activities. For application advice, specification confirmation or to order the V‑COIL insert system, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultants are available to assist with selection and implementation. Technical Data Article number: 4000867015NW Description: Thread repair assortment DIN 8140 M5–M12, stainless steel, 1.5×D, V‑COIL Packaging unit: 1 Manufacturer: VÖLKEL GmbH Core data Thread sizes: M5–M12 Engagement: 1.5×D Standard: DIN 8140 Packaging unit: 1 Special features Material: stainless steel System: V‑COIL helically wound coil insert Application: thread repair and reinforcement FAQ What thread sizes are covered by this kit? The V‑COIL thread repair assortment covers internal threads from M5 to M12, providing a standardised repair range for common metric thread sizes. Is the insert material suitable for corrosive environments? Yes, the inserts are made from stainless steel, offering enhanced corrosion resistance suitable for workshop and many industrial environments where oxidation must be minimised. What does the 1.5×D engagement specification mean? The 1.5×D indicates the insert’s engagement length relative to the nominal thread diameter, providing increased contact area and improved pull‑out strength compared with shorter engagements. Does the system conform to recognised standards? This repair assortment is produced in accordance with DIN 8140, ensuring predictable geometry and compatibility with inspection procedures that reference this standard. Can this insert restore the original thread strength? The V‑COIL design restores functional thread performance and typically improves load distribution by converting shear into compressive contact across the parent material, yielding a robust joint for repeated assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com