10mm T-Slot Nut DIN 508 8mm M6, Strength Class 10 - AMF
Benefit from standardised DIN 508 compatibility, a compact 8 mm T-slot fit and secure M6 threading for consistent clamping results; order directly via Metav Werkzeuge or consult our advisors for specification support. T-Nutenstein DIN 508 T-Nut 8mm M6 AMF — compact T-slot nut for standard clamping systems T-Nutenstein DIN 508 T-Nut 8mm M6 AMF is a standard-compliant T-slot fastening element for assembly and fixturing in machine tables and modular fixtures DIN 508 standardised design Compact 8 mm T-slot fit M6 internal thread for standard bolts Strength class 10 for reliable clamping Reliable standard fit for repeatable fixturing The T-Nutenstein DIN 508 T-Nut 8mm M6 AMF delivers a standardised interface via DIN 508, guaranteeing repeatable seating in 8 mm T-slot rails. The standard conformity ensures interchangeability across fixtures and tables that follow the same norm, which simplifies procurement and reduces assembly errors. The compact height 10 mm keeps the clamping envelope low, helping to avoid collisions in multi-level assemblies while providing sufficient material for thread engagement. This combination of size and standardisation aids planners and shop-floor staff in selecting compatible components without extensive measurement checks. High clamping reliability through defined strength and geometry Designed for dependable mechanical performance, the nut is specified with a strength class 10, indicating a high tensile capability for its category. The supplied axial values (A: 7.7, E: 13, K: 6) describe the critical seating and engagement dimensions that determine how the part sits and transfers load within a T-slot. These dimensional details assist engineers in verifying clamp geometry and calculating safe load paths in fixture design. Where predictable clamping behaviour is required, such clearly defined parameters reduce calculation overhead and support safe, auditable assembly practices. Practical compatibility and straightforward ordering The part accepts standard fastenings via the M6 thread and is intended for use in conventional T-slot systems with an 8 mm slot width. Supplied as packaging unit 1 and identifiable by SKU 4000833201NW, it is suitable for replacement stock or single-item assembly needs. The compact profile and standard thread make it simple to integrate into modular clamping setups, reducing the need for bespoke adaptors. For procurement and inventory management, the clear SKU and norm reference streamline ordering and ensure components arriving at the bench match design specifications. For specification guidance, order placement or to confirm fitment within a specific clamping system, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich. Technical data Article number: 4000833201NW UID: 4000833201NW Product type: T-slot nut Brand: AMF Dimensions & core data Height: 10 T-slot width: 8 Thread: M6 Standard: DIN 508 Packaging unit: 1 Special features Addition A: 7,7 Addition E: 13 Addition K: 6 Strength class: 10 FAQ What slot size does this T-slot nut fit? The nut is designed for an 8 mm T-slot and conforms to the DIN 508 specification for that slot width. Which thread size is provided on this part? This T-slot nut (AMF) features an M6 internal thread suitable for standard M6 bolts and screws. How is load capacity described for this component? Load-related capability is indicated by the strength class 10 and the axial dimensions (A: 7.7; E: 13; K: 6) which inform seating and load transfer. Can this item be used as a direct replacement in existing DIN 508 fixtures? Yes, the design follows DIN 508, making it suitable as a direct replacement where that norm is required. What is the ordering reference for this T-slot nut? Order or reference SKU 4000833201NW when requisitioning the AMF T-slot nut for procurement or stock purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm T-Slot Nut Nr. 510 Rhombic M8, Height 12mm - AMF
Take advantage of the M8 threaded connection, compact 12 mm height and rhombic profile for reliable fixture locating and uninterrupted production. Combine robust clamping performance with straightforward compatibility for 10 mm T-slots and order the component directly via Metav Werkzeuge or consult our advisors for specification support. T-slot nut No. 510 — 10 mm T-slot, M8 thread (AMF) T-slot nut No. 510 is a compact clamping element for securing workpieces and fixtures in 10 mm T-slots, offering a rhombic profile for positive locating in modular setups Fits 10 mm T-slots M8 internal thread Rhombic profile for positive locating High strength class 10 Secure, repeatable clamping for fixture workflows The rhombic T-slot nut provides a positive locating geometry that reduces lateral play and improves repeatability when securing clamps or tooling. With a 12 mm height and a designed fit for a 10 mm T-slot, the component delivers consistent seating in slot tracks, which minimises setup time and reduces the need for secondary alignment. This repeatability translates into fewer rejects and smoother machine operation during jigs and fixture changes. Simple integration with standard fixturing systems Compatibility with the widely used 10 mm T-slot combined with an M8 thread makes the part straightforward to incorporate into existing clamping systems and modular tables. The internal thread allows conventional bolts and studs to be used without special adapters, supporting fast assembly and disassembly. The clear mechanical interface supports efficient workflows and reduces the variety of fasteners required in the workshop. Robust performance under load and clear specification limits Specified with a strength class 10 rating and documented geometry parameters (A: 9.7; E: 15; K: 6), the nut is intended for demanding clamping applications where secure retention is essential. The rhombic form ensures torque is translated into axial holding force rather than slot damage, prolonging service life of both the nut and the slot. For shops aiming for predictable clamping behaviour, this combination of geometry and strength class supports a measurable improvement in operational reliability. For reliable fixturing choose the AMF No. 510 rhombic T-slot nut and contact Metav Werkzeuge for ordering and specification advice from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603182NW Type: No. 510 Product: T-slot nut Manufacturer: AMF Dimensions & core data Height: 12 mm T-slot width: 10 mm Thread: M8 Packaging unit: 1 A: 9.7; E: 15; K: 6; Strength class: 10 Designs & special features Rhombic profile for positive locating Intended for fixture and clamp mounting Compact form for minimal slot intrusion FAQ What T-slot width does the nut fit? The T-slot nut is designed for a 10 mm T-slot, matching standard 10 mm slot systems for modular tables and machine beds. Which thread size is provided on the component? The part features an M8 internal thread, allowing the use of common M8 bolts and studs for clamping and assembly. What is the height of the nut and why does it matter? The nut has a 12 mm height, which limits slot intrusion while providing sufficient engagement to transfer clamping forces securely. How does the rhombic profile improve clamping? The rhombic profile offers positive locating, reducing side play and ensuring torque is converted into axial clamping force rather than lateral movement. Is the strength rating specified for heavy-duty use? The component is documented with strength class 10 and geometry values (A: 9.7; E: 15; K: 6) to indicate suitability for demanding clamping applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12/20mm Keyway Block For Fixed Mounting, Suitable For M6 x 10, H2mm - AMF
Take advantage of precise fixture alignment and secure thread compatibility for stable clamping in mixed-slot machine tables; order directly via Metav Werkzeuge or consult the team for specification matching. T-slot nut No. 6322A — fixed-mount T-slot nut for 12/20 mm slots (AMF) The T-slot nut No. 6322A is a fixed-mount clamping component for machine tables and fixtures, designed for nominal T-slot widths of 12 mm and 20 mm and compatible with M6 x 10 fastenings. For 12 mm and 20 mm T-slots Compatible with M6 x 10 fasteners Designed for fixed mounting Secure clamping across machine and fixture slots The T-slot nut delivers a consistent mechanical interface where two different slot standards meet: a nominal 12 mm width on the machine side and 20 mm on the fixture side. This makes the component suitable for hybrid set-ups where adapters or stepped clamping rails are used. By matching the nominal slot dimensions, the element reduces lateral play and helps maintain repeatable positioning under load. The design supports conventional threaded fastenings and ensures that a standard M6 x 10 screw achieves the required clamp force without the need for special bolts or washers. Simple installation and compatibility benefits Installation is straightforward: the element accepts an M6 x 10 fastener and is intended for fixed mounting in the slot system, removing the need for complex alignment during assembly. Because the component is tailored to the two nominal slot widths, it provides mechanical compatibility between machine tables and dedicated fixturing plates. For procurement and system planning, the single-piece supply format simplifies stock keeping and allows planners to order the exact quantity required for assembly lines or jigs. Practical advantages for workshop and production use Using a dedicated T-slot nut that matches both machine and fixture slot dimensions reduces set-up time and minimises rework caused by ill-fitting clamping hardware. The part supports efficient tool changes and fixture swaps by providing a repeatable datum for clamping points. Where repeatability and minimised downtime are priorities, the component contributes to smoother production flow and predictable assembly outcomes, particularly in mixed-standard environments common in retrofit and modular fixturing. For reliable clamping in mixed-slot setups, order the AMF T-slot nut No. 6322A through Metav Werkzeuge and request specialist advice from the Metav team to ensure full compatibility with existing tables and fixtures. Technical data Article number: 4000833234NW SKU: 4000833234NW Type: Nr. 6322A Label: Nutenstein Nr.6322A Nennmaß der Nut 12/20mm z.Festmontage AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 UID: 4000833234NW Facts Nominal slot (machine): 12 mm Nominal slot (fixture): 20 mm Suitable for: M6 x 10 Special features Fixed-mount design Compatible with mixed slot standards (12 / 20 mm) Designed for standard M6 x 10 fastenings Supplied as single unit FAQ Which slot widths does this component fit? The T-slot nut No. 6322A fits nominal slot widths of 12 mm on the machine side and 20 mm on the fixture side, providing compatibility where both standards occur. What fastener size is required for mounting? Mounting requires an M6 x 10 fastener; the T-slot nut is designed to accept this standard metric screw for secure clamping. Is the T-slot nut intended for adjustable or fixed mounting? This variant is designed for fixed mounting, intended to be secured in place rather than used as a freely sliding T-slot nut. Can the part be used to bridge different fixture systems? Yes — because it addresses both 12 mm and 20 mm nominal slot dimensions, the component is suitable for bridging machine tables and fixture plates that use differing T-slot standards. How is the product supplied? The item is supplied as a single unit, allowing direct replacement or specific-count ordering for assembly needs. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm T-Slot Nut DIN 508 10mm M8, Strength Class 10 - AMF
Take advantage of a compact, DIN‑compliant fastening solution that combines a low profile with a robust M8 thread and strength class 10, ensuring consistent clamping performance in standard 10 mm T‑slots — order via Metav Werkzeuge or consult the specialists for application advice. T-Nutenstein DIN 508 T-Nut 10mm M8 AMF — standard T-slot nut with M8 thread and 12 mm height The T-Nutenstein DIN 508 T-Nut 10mm M8 AMF is a DIN‑508 compliant T‑slot nut designed for secure clamping in 10 mm machine table slots and modular fixturing systems. DIN 508 standard fit for T-slot 10 mm M8 internal thread for common fixtures Strength class 10 for high clamping loads Compact 12 mm height for low-profile setups Consistent fit and repeatable clamping in standard T‑slots Compliance with DIN 508 guarantees a precise seating geometry for insertion into T-slot 10 mm profiles, reducing lateral play and enabling repeatable clamping cycles. The machined profile matches common machine table tolerances, so fixture alignment and repositioning run with minimal adjustment. The combination of the standardised form and the integrated M8 thread means compatibility with widely used bolts and clamping elements, simplifying procurement and reducing the variety of fasteners required on the shop floor. High load capacity where strength matters Specified as strength class 10, the component is intended for demanding clamping tasks where increased tensile and yield capacity are required. This elevated class reduces the risk of plastic deformation under higher clamping torques and contributes to longer service intervals in high‑cycle production. For operations that prioritise mechanical reliability, the higher property class delivers a rational performance advantage and supports stable machining conditions with predictable holding force. Rapid integration into existing fixtures and easy machining layout The 12 mm height and compact form factor allow installation into low‑profile setups and tight assemblies without sacrificing thread access. Detailed installation dimensions — A 9.7; E 15; K 6 — provide the necessary reference for CAD modelling and fixture design, enabling seamless integration into existing jigs and clamping systems. The internal M8 thread aligns with standard clamping bolts, which accelerates assembly time and reduces the need for specialised fasteners, delivering a clear efficiency benefit on the production line. Proven reliability and supply continuity for workshops As a standardised T‑slot fastener from AMF, the part supports steady sourcing strategies for production and toolrooms. Availability via Metav Werkzeuge links the component to a stable European supply chain and a broad product range, which helps consolidate procurement and lowers vendor complexity. The presence of a defined standard and clear dimensional data supports quality assurance processes and simplifies documentation for inspection and traceability in workshop environments. For secure, DIN‑compliant clamping select the AMF T‑slot nut and contact Metav Werkzeuge for stock status or technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 4000833202NW UID: 4000833202NW Manufacturer: AMF Facts Height: 12 mm T-slot width: 10 mm Thread: M8 Addition: A 9.7; E 15; K 6 Strength class: 10 Packaging unit: 1 Special features Standard: DIN 508 Product type: T-slot nut SKU: 4000833202NW FAQ Which T-slot width does this nut fit? The AMF T‑slot nut is designed for a 10 mm T‑slot in accordance with DIN 508, providing the appropriate seating geometry for standard machine table slots. What thread size is provided in the nut? This T‑slot nut includes an M8 internal thread, matching common clamping bolts and fixture hardware used in workshop assemblies. What does strength class 10 mean for the application? Strength class 10 indicates a higher property class intended for elevated clamping forces; the AMF T‑slot nut rated as strength class 10 offers improved resistance to deformation under load compared with lower classes. Are detailed installation dimensions available for fixture design? Yes; the component data lists the addition values A 9.7; E 15; K 6, which serve as reference dimensions for CAD modelling and fixture layout when integrating the AMF T‑slot nut. Is this product standard compliant and suitable for repetitive clamping cycles? Manufactured to DIN 508, the T‑slot nut from AMF provides a standardised form that supports repeatable seating and reliable clamping performance across multiple cycles. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm T-Slot Nut M8 DIN 508 14mm Height, Strength Class 10 - AMF
Take advantage of a DIN 508-compliant fastening solution that fits 12 mm T-slots and provides an M8 internal thread for standardised fixturing; its strength class 10 rating ensures robust clamping and consistent repeatability in production environments. Order directly via Metav Werkzeuge or consult the team for application guidance. T-slot nut (DIN 508) — 12 mm T-slot, M8 thread — AMF A T-slot nut (DIN 508) engineered for securing fixtures and components in standard 12 mm T-slots, suitable for workshop and industrial clamping applications. DIN 508 compliant T-slot nut Fits 12 mm T-slots M8 internal thread Strength class 10 for high clamping forces Reliable clamping in standard T-slots The DIN 508 conformity guarantees compatibility with industry-standard T-slotted tables and profiles, enabling repeatable fixturing without trial-and-error adaptations. Built to sit precisely in a 12 mm slot and accept an M8 fastener, this component simplifies setup and reduces downtime during tool changes or rework. The standardised interface means fixtures and clamps from different suppliers align predictably, improving throughput and lowering setup variability. Built for strength and consistent repeatability Specified as strength class 10, the design supports elevated clamping forces while maintaining a secure seat in the T-groove. The factory-provided geometry values — A: 11.7; E: 18; K: 7 — define the critical seating and engagement dimensions that influence load distribution and torque transfer. This measured approach to geometry ensures that each unit delivers consistent mechanical behaviour across repeated cycles, which is essential for high-volume or precision assembly processes. Quick integration into assembly and fixturing workflows With a compact profile and standard thread form, the part integrates easily into existing fixturing systems and tooling kits. Supplied in single units, the item is identified by SKU/UID 4000603160NW for straightforward procurement and inventory control. Where fast replacement or exact-match parts are required, the standardised specification streamlines purchasing and reduces the risk of incorrect components entering the production line. The component supports efficient production planning by removing ambiguity about compatibility with common clamps and bolts. For secure, standard-compliant fixturing choose AMF T-slot nuts — contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU / UID: 4000603160NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 12mm M8 AMF Manufacturer: AMF Dimensions / Standards Height: 14 mm T-slot width: 12 mm Thread: M8 Standard: DIN 508 Packaging unit: 1 Features / Special values Strength class: 10 Addition: A: 11,7; E: 18; K: 7 Product type: T-slot nut FAQ What slot width does this T-slot nut fit? The T-slot nut is specified for 12 mm T-slots and accepts an M8 fastener, as shown in the product specification for the AMF T-slot nut (SKU 4000603160NW). Is the nut compliant with industry standards? Yes — the component is DIN 508 compliant, ensuring standardised dimensions and interchangeability with compatible fixture systems. What does strength class 10 mean for performance? Strength class 10 indicates the component is designed for higher clamping loads and improved resistance to yielding under torque, supporting more demanding assembly and machining tasks. What are the A, E and K values listed in the data? The values A: 11.7; E: 18; K: 7 are factory-specified geometry figures that define the seating and engagement dimensions of the part; they are used to verify fit and load distribution in fixturing designs. Is the material specified for this T-slot nut? The provided product data for the AMF T-slot nut (SKU 4000603160NW) does not specify the material; consult the manufacturer's technical datasheet for material confirmation and surface treatment details. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14/20mm T-Slot Nut Nr. 6322A for M6 x 16 Fixed Mounting, H10 5mm - AMF
Product data issue: the provided manufacturer "AMF" is not listed in the approved manufacturer reference overview supplied with the briefing. The specification mandates that a product description must include one of the exact manufacturer/responsible entries from that reference; without a matching entry the required manufacturer block cannot be completed and the full, compliant product text cannot be generated. Please supply the correct manufacturer name as it appears in the reference list (for example Metav IndustryLine, Filetta, Kern, Dino‑Lite, Walter Tools, etc.), or confirm which of the listed responsible contacts should be used for this article. After receiving a valid manufacturer mapping from the approved overview, a complete British English product description conforming to the requested structure and editorial rules will be produced.
14mm Slot Nut Nr. 6322B 10mm Height, For M6 x 16 Fixing - AMF
Take advantage of a compact, robust fastening solution with a 14 mm nominal slot width and compatibility with M6 x 16 fasteners; the compact 22 mm overall length supports secure, low-profile installations and simple assembly. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot nut No. 6322B — 14 mm slot, fixed mounting (AMF) A T-slot nut No. 6322B engineered for secure fixed mounting in 14 mm T-slots, suitable for workshop and industrial fixturing where compact, reliable clamping is required Nominal slot width 14 mm For fixed mounting applications Compatible with M6 x 16 Compact overall length 22 mm Secure and compact design for reliable clamping The design focuses on robust, repeatable fastening in 14 mm T-slots, providing a reliable interface between profile and fastener. The component’s 22 mm overall length and 10 mm height ensure a low-profile fit where space is limited while maintaining enough contact area for stable torque transmission. Thanks to the compatibility with M6 x 16 bolts, integration with common workshop hardware is straightforward. This combination reduces setup time and minimises rework, supporting efficient production and assembly cycles. Practical benefits for workshop and industrial applications Engineered for fixed mounting, this slot nut delivers consistent alignment and secure seating, which simplifies fixture assembly and prevents inadvertent loosening during operation. The compact geometry cuts material overhang and keeps assemblies neat, which is particularly useful in jigs, machine tables and modular framing. By using a standard bolt interface, procurement and maintenance are simplified, lowering total process costs and downtime without sacrificing performance. Installation clarity and compatibility Installation is intuitive: position the nut in the T-slot, align for the required clamping point and secure with the specified M6 x 16 fastener. The simple mounting principle reduces assembly errors and speeds up repetitive setups. Where interchangeability matters, the standardised 14 mm nominal slot width makes this component compatible with a wide range of aluminium profile systems and accessory parts commonly used across workshops and production lines. Contact Metav Werkzeuge for tailored advice on integrating the T-slot nut No. 6322B into existing assemblies and to confirm immediate availability from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833227NW Type: Nr. 6322B Brand: AMF Dimensions & specifications Height: 10 mm Overall length: 22 mm Nominal slot width: 14 mm Suitable for: M6 x 16 Designs & special features Product type: T-slot nut For fixed mounting Packaging unit: 1 UID: 4000833227NW Addition: B: 14 FAQ What slot width is this nut designed for? The nut is designed for a 14 mm nominal slot width and is specified accordingly for profile systems with that slot size. Which bolt size fits this component? This T-slot nut accepts M6 x 16 bolts for secure fastening in the designated T-slot. Is the nut suitable for fixed mounting applications? Yes, the T-slot nut No. 6322B is intended for fixed mounting, offering a stable interface for permanent or semi-permanent assemblies. What are the main dimensions to check for compatibility? Key dimensions are 22 mm overall length and 10 mm height; these determine fit and clearance within the profile and assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut 12mm M10, DIN 508 - AMF
Take advantage of the combination of DIN-compliant design, robust M10 threading and clear dimensional data for dependable fixture assemblies; the compact form factor ensures simple integration into standard 12 mm T-slots. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot nut DIN 508 T-slot 12 mm M10 AMF — DIN 508-compliant fastening element with strength class 10 The T-slot nut DIN 508 T-slot 12 mm M10 AMF is a standardised machine-shop fastener made for secure clamping in 12 mm T-slots, offering an M10 internal thread and a compact height of 14 mm for versatile fixture applications Compliant with DIN 508 For 12 mm T-slots M10 internal thread Strength class 10 Consistent clamping performance for fixture systems The nut is designed for consistent mechanical engagement in standardised T-slots, delivering repeatable clamping action when combined with appropriate bolts and clamping elements. Thanks to the M10 internal thread and strength class 10, the fastener provides a high-grade connection for common workshop and industrial fixtures. The dimensional parameters are compact—height 14 mm—which supports space-saving setups while maintaining sufficient thread depth for robust load transmission. This makes the component suitable for modular fixturing where predictable behaviour under preload is essential. Clear standardisation eases specification and procurement Built to DIN 508, the fastener can be specified with confidence in drawings and bills of materials; the conformity reduces ambiguity in procurement and assembly. The designation 12 mm T-slot describes the slot width the nut is intended for, so compatibility checks become straightforward during planning. Where technical clarity is required, the SKU 4000833203NW and the standard reference simplify order handling and inventory control, reducing time spent on verification and speeding up procurement cycles. Measured dimensions and application-oriented values Key application values are provided to support machining and fixture design: T-slot 12 mm, thread M10, and the axial dimensions given as A 11.7 mm, E 18 mm, K 7 mm support precise positioning and load calculations. The listed strength class 10 denotes a high-strength fastener grade, making the component suitable for demanding clamping tasks where elevated preload and shear resistance are required. Where unfamiliar, the strength class indicates the fastener's mechanical grade rather than surface finish—selection should match the mechanical demands of the assembly. Integration, handling and stock management benefits The product’s compact geometry simplifies insertion into grooves and allows rapid assembly with standard M10 bolts. Supplied in single-unit packaging, the item is easy to store and manage in small quantities or to include in kitted assemblies. Traceability is supported by the catalog reference and label data, which assist workshop managers in matching replacements and maintaining consistent quality across multiple machines or jigs. Practical handling considerations—such as the nut’s orientation and thread engagement—are compatible with common clamping workflows and standard tooling. For standard-compliant and reliable fixturing with the AMF T-slot nut, contact Metav Werkzeuge for expert advice and assured supply from Emmerich — fast, transparent and tailored to industrial requirements. Technical data Article number: 4000833203NW Label: T-Nutenstein DIN 508 T-Nut 12mm M10 AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 Facts Height: 14 mm T-slot width: 12 mm Thread: M10 Standard: DIN 508 Strength class: 10 A: 11.7 mm E: 18 mm K: 7 mm Special features DIN 508 conformity Intended for 12 mm T-slots M10 internal thread Compact height for space-saving fixtures FAQ What T-slot width is this nut designed for? The nut is intended for a 12 mm T-slot, matching standard 12 mm slot profiles used in machine tables and fixturing systems. Which thread size is provided in the fastener? This fastener features an M10 internal thread suitable for M10 bolts and clamping screws. Is the nut compliant with industry standards? Yes, the component is manufactured to DIN 508, ensuring consistent dimensions and interchangeability for industrial applications. What does strength class 10 mean for assembly use? Strength class 10 indicates a high mechanical grade for the fastener, making it suitable where increased preload and shear resistance are required in clamping applications. How can the SKU be used during ordering? Refer to SKU 4000833203NW when ordering or checking inventory to ensure the correct DIN 508 T-slot nut variant is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut M10 DIN 508 16mm Height, Strength Class 10 - AMF
Take advantage of the combination of DIN 508 conformity and a sturdy M10 thread for dependable fixture assemblies, together with a 14 mm T-slot fit for straightforward integration into standard machine tables. Order the component directly via Metav Werkzeuge or consult our technical team for application advice. T-Nutenstein (DIN 508) Werksnorm T-Nut 14mm M10 AMF — robust M10 thread, 14 mm T-slot fit T-Nutenstein (DIN 508) Werksnorm T-Nut 14mm M10 AMF is a precision T-slot nut designed for secure clamping in standard 14 mm T-slot profiles, suitable for industrial and workshop fixturing. DIN 508 standardised design M10 internal thread for secure fastening Fits 14 mm T-slot profiles 16 mm height for stable clamping Reliable clamping where repeatability matters The T-slot nut offers a standardised interface thanks to DIN 508 conformity, which ensures predictable geometry when assembling fixtures and clamps. Its M10 thread combined with a 14 mm T-slot fit provides a compact yet firm connection, reducing play and alignment effort during setup. This standardisation speeds up changeovers on machine tables and contributes to consistent repeatability across production runs. Designed for straightforward integration and time savings With a nominal height of 16 mm, this component sits flush in many conventional T-slot profiles, enabling a low-profile connection that keeps tooling clear of obstructions. The concise geometry simplifies handling during assembly, which translates into measurable time savings on repetitive clamping tasks. The specification line showing A: 13.7, E: 22, K: 8 denotes the relevant dimensional references used for precise seat geometry and compatibility checks. Built for industrial stress and long service life The nut’s strength class 10 indicates a high tensile capability for demanding clamping applications, making it suitable where a secure hold under load is essential. In practice, this means fewer retightening cycles and higher process reliability. The robust mechanical class reduces the risk of thread deformation when used with matching bolts, supporting continuous operation in manufacturing environments. Practical compatibility and application guidance Common applications include machine tables, modular fixturing systems and jigs where standard 14 mm T-slots are present. The component is intended for use with M10 bolts and is best paired with compatible washers and clamps to distribute load evenly. For specific material or profile checks, refer to machine table documentation or contact our technical advisers for confirmation of fit and suitability. For supply, specification checks or fitment advice contact Metav Werkzeuge—our specialists at info@metav-werkzeuge.com or +49 2822 7131930 will advise on integration and delivery options. Technical data Article number: 4000603162NW SKU: 4000603162NW Brand: AMF Product type: T-slot nut Standard: DIN 508 Facts Height: 16 mm T-slot width: 14 mm Thread: M10 Packaging unit: 1 Axite enrichment: A: 13.7; E: 22; K: 8; Strength class: 10 Special features DIN 508 conformity Strength class 10 Compact low-profile design Suitable for standard machine tables and modular fixturing FAQ What size T-slot does this nut fit? The nut is designed for 14 mm T-slot systems and provides a standard fit for corresponding profiles. Which thread size is provided and what fastener should be used? This part features an M10 thread; use an M10 bolt of suitable class and length for the intended clamp assembly. Is the component compliant with any standards? Yes, the product conforms to DIN 508, which standardises the geometry for T-slot nuts and ensures interchangeability. How does the strength class affect use? The strength class 10 indicates a high tensile capability, improving resistance to deformation under load and supporting secure clamping in industrial applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14mm T-Slot Nut M8 DIN 508 16mm Height, Strength Class 10 - AMF
Benefit from the reliable fit of the DIN 508 standard, the secure M8 threaded fastening and the precise 14 mm T‑slot compatibility for dependable clamping and quick assembly; order directly via Metav Werkzeuge or contact our advisers for detailed application support. AMF T-slot nut (DIN 508) – 14 mm T-slot, M8 thread The AMF T-slot nut (DIN 508) provides a standardised fastening element for machine tables and fixture systems, offering secure M8 thread engagement in 14 mm T-slots for industrial clamping and modular jig construction. DIN 508 compliant design 14 mm T-slot compatibility M8 threaded fastening High-strength class 10 Faster, more secure clamping with standard conformity The combination of a DIN 508 specification and a precise 14 mm T-slot geometry reduces setup uncertainty and ensures interchangeability across machine tables and modular fixtures. Standard conformity simplifies procurement and maintenance planning, as replacement parts match existing profile systems without trial fittings. The robust M8 thread provides a proven connection for medium-duty clamping tasks, while the defined geometry keeps lateral play to a minimum, supporting repetitive positioning and saving time during changeovers. Robust performance and material handling reassurance Manufactured for repeatable clamping, this component delivers a high-strength connection thanks to its strength class 10 rating and M8 thread form. The compact profile with a nominal height of 16 mm is suitable for many standard machining tables and workbench systems, allowing reliable load transmission without excessive bulk. Where process stability and secure fixation are required, the engineered geometry helps maintain clamping force and reduces the risk of loosening under vibration, contributing to consistent machining results and fewer setup-related rejects. Simple specification and integration for engineering teams Engineers and workshop planners benefit from clear, measurable specifications: 14 mm T-slot fit, M8 metric thread and compliance with an established DIN standard. These characteristics make planning straightforward and reduce the need for on-the-spot adjustments. The component’s documented dimensions and strength class facilitate calculations for clamping forces and safety factors, enabling rational decisions during fixture design and assembly. For procurement, the clear SKU and specification support repeatable ordering and part-tracking within inventory systems. Contact Metav Werkzeuge for procurement guidance and application advice on this AMF T-slot nut; our team in Emmerich can confirm suitability for specific machines and supply quantities to match production requirements. Technical data Article number: 4000603161NW Manufacturer: AMF Standard: DIN 508 SKU: 4000603161NW Facts Height: 16 mm T-slot width: 14 mm Thread: M8 Strength class: 10 Special features AMF brand T-slot nut Packaging unit: 1 Axite additions: A: 13.7; E: 22; K: 8 FAQ Is this component compatible with 14 mm T-slots? Yes. The AMF T-slot nut is specified for a 14 mm T-slot and is designed to fit standard 14 mm profiles without modification. What thread size does the nut accept? The part features an M8 threaded bore, providing conventional metric mating for bolts and studs. Does the nut conform to an established standard? The nut is made to DIN 508, ensuring compatibility and interchangeability with systems designed to that standard. What is the height of the nut and how does that affect clamping? The nut has a height of 16 mm, offering a compact profile that supports reliable clamping force while fitting common table and fixture geometries. What strength class applies to this fastening element? This item is rated strength class 10, indicating a high-strength fastening suitable for demanding clamping situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16/20mm T-Slot Nut Nr. 6322A For Fixed Mounting, M6 x 16 - AMF
Take advantage of a compact, fixed-mount solution that fits both 16 mm and 20 mm T-slots and accepts standard M6 × 16 fastenings; order directly via Metav Werkzeuge or consult the technical team for application advice. T-slot Nut No. 6322A by AMF — Nominal slot 16/20 mm, fixed mounting A T-slot nut No. 6322A engineered for secure, fixed mounting in both 16 mm and 20 mm machine and fixture slots, suitable for standard M6 × 16 fasteners. Fits 16/20 mm T-slots Fixed-mount design Compatible with M6 × 16 fastenings Low-profile form for compact assemblies Secure clamping for standard T-slots with minimal profile The T-slot nut delivers straightforward, dependable clamping where slot compatibility is critical. Designed around the nominal slot dimensions 16 mm / 20 mm, the component ensures consistent seating in both machine and fixture profiles, reducing play and misalignment during assembly. Its fixed-mount concept provides a stable bearing surface for threaded fastenings, allowing conventional M6 × 16 screws to be used without adaptation. This predictability shortens set-up times and supports repeatable results on the shop floor. Fast, reliable installation that supports production flow A compact, low-profile mounting element simplifies access in confined assemblies and streamlines insertion into the slot before final tightening. The reduced profile contributes to clearance savings and allows closer component placement, which benefits compact fixtures and modular assemblies. Because the part is tailored for standard thread and slot formats, maintenance and replacement cycles are simplified—spares management is easier when components conform to common industry sizes, improving uptime and operational efficiency. Robust choice for workshops and fixture construction Selecting a purpose-made T-slot nut for fixed mounting helps to avoid secondary modifications and on-site adjustments. The component’s clear specification for slot nominal sizes and thread compatibility supports process planning and quality control. For purchasing and procurement, this clarity enables straightforward parts lists and ensures components match machine tables or fixture rails, making it an efficient choice for engineering departments, toolrooms and production teams seeking reliable, repeatable clamping solutions. Contact Metav Werkzeuge for ordering and application support for the AMF T-slot Nut No. 6322A — technical consultation and prompt dispatch from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833236NW Type: Nr. 6322A Label: Nutenstein Nr.6322A Nennmaß der Nut 16/20mm z.Festmontage AMF Manufacturer: AMF Packaging unit: 1 Suitable for: M6 x 16 Core data Nominal slot dimensions: 16 mm / 20 mm Thread size: M6 × 16 Height (HL): 5 mm Pack unit: 1 Features Fixed mounting design T-slot nut for machine and fixture slots Compact, low-profile form Standard fastener compatibility FAQ What slot sizes is this nut intended for? The AMF T-slot Nut No. 6322A is specified for nominal slot dimensions of 16 mm and 20 mm, allowing use in both machine and fixture T-slots. Which fasteners are compatible with this T-slot nut? Compatibility is with standard M6 × 16 fastenings; the component accepts M6 threads with a 16 mm screw length as indicated. Is this item supplied individually or in sets? The product is supplied in a packaging unit of 1, so each order line corresponds to a single T-slot nut. Does the nut support fixed mounting only, or is it adjustable? The design is for fixed mounting, providing a secure, non-adjustable seating in the slot to ensure stable clamping under load. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Nut 14mm M12 with Strength Class 10, DIN 508 - AMF
Robust, standardised clamping for 14 mm T-slots with a compact 16 mm profile and M12 thread delivers dependable fixation and simple interchangeability; use the secure strength class 10 design for demanding workholding. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF — compact 16 mm height, M12 thread A T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF designed for secure, standard-compliant clamping on machine tables and clamping fixtures. DIN 508 standard conformity For 14 mm T-slots M12 threaded connection Strength class 10 clamping security Consistent, standard-compliant workholding for production Compliance with DIN 508 ensures predictable fitting and interchangeability across a wide range of machine tables and fixtures. The combination of a 14 mm T-slot profile with an M12 thread provides a balance between compact size and mechanical strength, allowing straightforward integration into existing setups. This standard-based approach reduces setup time and minimises the risk of mismatched components, supporting smoother production flows and fewer interruptions in clamping operations. Low-profile design that aids compact assemblies The 16 mm height offers a low-profile solution where space above the T-slot is limited. This compact build helps maintain a low centre of gravity for clamped parts and permits closer stacking of clamping elements, which is useful in multi-fixture arrangements or when working with tall workpieces. The narrow profile also simplifies access for spanners and torque tools while keeping the clamping point stable, enabling efficient use of available table space without sacrificing hold. Secure threaded connection for repeatable clamping An M12 threaded interface combined with a strength class 10 rating gives a high clamp-force capability relative to the component size. This means reliable fixation under cyclical loads and during machining operations where forces can vary. The numeric parameters A: 13.7, E: 22 and K: 8 describe the critical contact and installation dimensions that determine how the nut seats in the slot and how load is distributed; such detail supports predictable torque settings and safer, repeatable clamp results. Interchangeability, traceability and industrial suitability Marked by a clear label and SKU, the component is suitable for systematic inventory and maintenance procedures. The standard format eases replacement and stocking decisions in workshops and production facilities that favour modularity. For procurement and quality assurance, the SKU 4000833204NW and brand AMF provide traceability for parts lists and servicing, while the packaging unit of 1 simplifies single-item supply for targeted repairs or adjustments. Choose the AMF T-slot nut for standardised, high-strength clamping and contact Metav Werkzeuge for fast supply and expert advice from Emmerich Technical Data Article number: 4000833204NW Label: T-Nutenstein DIN 508 T-Nut 14mm M12 AMF Brand: AMF Product type: T-Nutenstein Facts Height: 16 mm T-slot width: 14 mm Thread: M12 A: 13.7 mm E: 22 mm K: 8 mm Strength class: 10 Packaging unit: 1 Special features DIN 508 compliance Compact low-profile design Threaded M12 connection Traceable SKU for procurement FAQ Is this component compatible with 14 mm machine T-slots? Yes. The T-slot nut conforms to DIN 508 and is specified for 14 mm T-slots, making it compatible with standard 14 mm slot profiles. What thread size does the nut use and what does that mean for clamping? The nut features an M12 thread; combined with strength class 10, this allows higher clamp forces compared with smaller threads, improving fixation during machining. What are the key installation dimensions to check? Relevant dimensions include A: 13.7 mm, E: 22 mm and K: 8 mm, which determine seating and load distribution in the T-slot and influence torque and engagement depth. Can the part be identified for ordering and maintenance? Yes. The item is listed under SKU 4000833204NW and labelled as T‑Nut 14mm M12 by AMF, facilitating procurement and inventory control. Is this suitable for heavy-duty industrial use? The strength class 10 rating and M12 thread indicate suitability for demanding clamping tasks where reliable fixation and repeatable torque behaviour are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut M12 Height 18mm DIN 508, Strength Class 10 - AMF
Benefit from a standard-compliant design, high strength class 10 performance and a compact 18 mm profile for secure clamping in 16 mm T-slots; order the AMF T-slot nut directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot nut (DIN 508) – T-nut 16 mm, M12 thread The AMF T-slot nut (DIN 508) is a precision clamping element for machinery and fixture work, developed for reliable engagement in 16 mm T-slots and fitted with an M12 internal thread. DIN 508 standardised design For 16 mm T-slots M12 internal thread Height 18 mm, strength class 10 Consistent, standardised fastening for repeatable setups A solution built to industry standards, this T-slot nut ensures DIN 508 compliance, guaranteeing interchangeability with matching table profiles and fixtures. The combination of a 16 mm slot fit and an M12 internal thread reduces ambiguity during procurement and simplifies inventory management. With its declared strength class 10, the component delivers a predictable load capacity that supports engineered clamping strategies; the specification therefore aids planners and workshop managers in selecting the correct element for machines and jigs without the need for extensive testing. Faster assembly and secure engagement at the machine The compact height 18 mm profile is designed for positive engagement in the slot, improving contact surface and reducing the risk of rotation under load. As a T-slot element, it converts axial screw force into secure lateral fixation, enabling efficient clamping with minimal setup time. This practical behaviour translates into measurable productivity gains on repeat runs and fixture changes, while the standardised geometry helps maintain consistent torque transfer and stable clamping forces across assemblies. Practical procurement and engineering information for integration Engineering values such as the axite enrichment (A: 15.7; E: 25; K: 9) and the declared strength class 10 provide the necessary data points for CAD integration and strength assessments, supporting design decisions early in the work process. Delivered in single-piece packaging, the component is appropriate for sample fitting or small batch supplies. For specification clarifications or to obtain additional technical drawings, Metav Werkzeuge provides direct support via email and telephone; this local point of contact aids rapid decision-making and reliable supply planning. Request tailored technical advice or a stock check from Metav Werkzeuge for the AMF T-slot nut (SKU 4000603165NW) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603165NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 16mm M12 AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 Numbers / Core data Height: 18 mm T-slot size: 16 mm Thread: M12 Strength class: 10 Axite values: A 15.7; E 25; K 9 Designs / Special features DIN 508 compliant Works standard T-nut 16 mm M12 internal thread Single-piece packaging FAQ Is this T-slot nut compatible with all 16 mm T-slots? The AMF T-slot nut is designed to fit standard 16 mm T-slots in accordance with DIN 508 and will be compatible with tables and profiles manufactured to that standard. What does strength class 10 mean for my clamping setup? Strength class 10 indicates the material grade and tensile characteristics declared for the component; the AMF T-slot nut’s class 10 rating supports robust clamping where predictable mechanical performance is required. Can the T-slot nut be used with M12 clamping screws directly? Yes, the internal M12 thread on this slot nut accepts M12 clamping screws, enabling direct use with standard threaded fasteners for secure fixation. Are the axite enrichment values relevant for fixture design? Yes, the axite values (A: 15.7; E: 25; K: 9) provide additional geometric and load-related information useful for CAD modelling and engineering assessments when integrating the T-nut into fixtures. Is the product supplied as single units or in bulk packs? The component is supplied as a single-piece packaging unit, suitable for sample fitting or precise quantities in assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut M14 DIN 508 18mm Height, Strength Class 10 - AMF
A compact combination of DIN 508 standard conformity, a 16 mm T-slot fit and a secure M14 thread ensures reliable fixture clamping and long service life. Benefit from the robust strength class 10 specification and fast supply from Metav Werkzeuge — order directly or consult our team for application advice. T-slot nut (DIN 508) — T-Nut 16 mm with M14 thread (AMF) The T-slot nut (DIN 508) is a standardised clamping element for 16 mm T-slots, providing a secure threaded anchor (M14) for fixtures, stops and tooling in milling and drilling tables. DIN 508 standard compliance For 16 mm T-slots M14 internal thread Strength class 10 Secure, standardised clamping for production tables The choice of a DIN 508-compliant T-slot component delivers predictable fit and repeatable positioning across a wide range of machine tables. By matching the common 16 mm T-slot dimension and offering an M14 internal thread, the part reduces setup times and minimises the need for custom adaptors. The standardisation translates into operational reliability: fixturing becomes straightforward, interchangeability is ensured and the risk of misfit is lowered. This practical compatibility supports efficient small-batch production and routine workshop tasks. Engineered for strength and stable fixation Manufactured to a strength class 10, this T-slot element provides high clamping resilience under load, making it suitable for demanding holding tasks. Dimensional data specified for seating and engagement (A: 15.7; E: 25; K: 9) ensures precise seating and consistent torque transmission when paired with appropriate bolts. The internal M14 thread permits use with common industrial fasteners, enabling secure joining without additional machining. The result is a robust connection that maintains alignment and resists loosening during machining cycles. Practical integration and workshop advantages The compact geometry and standard thread allow quick installation and replacement, which reduces machine downtime and simplifies inventory management. As a simple, durable component, the nut supports modular fixturing strategies and is well suited to both maintenance and production environments. For purchasers seeking dependable components, the standardised specification and measurable dimensions facilitate procurement and quality control within an industrial supply chain. For professional procurement of standardised clamping components, contact Metav Werkzeuge for fast delivery from Emmerich, technical advice and exact order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833205NW Article designation: T-slot nut (DIN 508) T-Nut 16mm M14 AMF Thread: M14 T-slot width: 16 mm Standard: DIN 508 Facts Height: 18 mm Addition A: 15.7 Addition E: 25 Addition K: 9 Strength class: 10 Packaging unit: 1 UID: 4000833205NW Special features Standardised for repeatable clamping Compatible with common M14 fasteners Robust strength specification Compact design for machine tables FAQ How does the DIN 508 standard affect compatibility with machine tables? The DIN 508 specification used for this T-slot nut ensures that the component seats and aligns consistently in 16 mm T-slots, providing predictable compatibility with standard machine tables and fixtures. Can the M14 thread be used with standard hex bolts and clamping elements? Yes, the M14 internal thread is compatible with commonly available M14 bolts and clamping hardware, allowing straightforward integration into existing fixturing systems. What do the A, E and K dimensions indicate for installation? The listed values (A: 15.7; E: 25; K: 9) describe key seating and engagement dimensions that determine how the nut locates in the slot and how much thread engagement is available for safe clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut Nr. 510 T-Slot 14mm M12 Rhombic, Strength Class 10 - AMF
Secure clamping and straightforward integration into standard fixtures thanks to the rhombic profile and an M12 fixation thread. The compact 16 mm height suits 14 mm T-slots while strength class 10 ensures reliable load capacity. Order the AMF T-slot nut directly via Metav Werkzeuge or ask our consultants for tailored advice. T-slot nut Nr. 510 — AMF T-Nut 14 mm, M12, rhombic T-slot nut Nr. 510 is a rhombic-profile T-slot nut designed for secure, repeatable fixturing in machine tables and modular fixtures. Rhombic profile for secure clamping Compatible with 14 mm T-slots M12 thread for robust fixation Strength class 10 for high load capacity Reliable clamping performance for precision fixtures The rhombic profile provides a positive seating in the slot, reducing lateral play and improving repeatability in clamping positions. Combined with the M12 internal thread and a nominal height of 16 mm, the component is dimensioned for stable engagement in 14 mm T-slots, delivering consistent clamp force under cyclic loads. The strength class 10 designation indicates enhanced tensile properties, which benefits applications where sustained clamping pressure and safety margins matter. Clear dimensional fit for quick selection and assembly Key dimensional values are specified as A: 13.7 mm, E: 22 mm and K: 8 mm, ensuring a predictable fit into profile and table grooves. These figures describe the main contact and engagement geometry and support compatibility checks with bolting hardware and slot tolerances. The rhombic head geometry and the T-slot interface allow simple assembly with standard hex bolts into the M12 thread, shortening setup time and reducing adjustment work on the shop floor. Suitable uses and workshop advantages The part is intended for use in milling tables, drilling jigs, and modular clamping systems where both positional accuracy and load resistance are required. Its compact form factor helps keep assemblies close to the workpiece while the M12 fixation ensures connection integrity during machining operations. Specified packaging unit facilitates inventory planning for workshops and distributors, and the combination of proven geometry and elevated material strength supports long service intervals and predictable maintenance cycles. For ordering or selection support for the AMF T-slot nut Nr. 510, contact Metav Werkzeuge for expert advice and prompt dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833217NW SKU: 4000833217NW Brand: AMF Type: Nr. 510 Product: T-slot nut Facts Height: 16 mm T-slot size: 14 mm Thread: M12 Dimensional values: A: 13.7 mm, E: 22 mm, K: 8 mm Strength class: 10 Packaging unit: 1 Special features Rhombic head profile Designed for machine table and fixture use Robust M12 fixation Compact, low-profile form FAQ Which T-slot width is this nut compatible with? The AMF T-slot nut Nr. 510 is designed for 14 mm T-slots and engages reliably with the specified head geometry. What thread does the component accept? The internal thread is M12, allowing use with standard M12 bolts for secure fastening. What does strength class 10 mean for load handling? Strength class 10 indicates higher tensile properties compared with lower classes, so the AMF T-slot nut Nr. 510 offers improved resistance to shear and tensile loads in demanding clamping situations. Are the dimensional values A, E and K relevant for fixture design? Yes; A: 13.7 mm, E: 22 mm and K: 8 mm define the main engagement geometry and help ensure correct clearance and contact in assemblies. Is this product suitable for repeated repositioning in jigs? The rhombic profile and robust thread make the part well suited to repetitive clamping and repositioning in modular workshop fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18/20mm Slot Nut For Fixed Mounting, Fits M6 x 16, H5 - AMF
Compact, reliable and made for mixed-profile setups: the combination of a fixed-mount design, compatibility with nominal groove 18 mm / 20 mm and support for M6 x 16 fasteners ensures consistent clamping and rapid assembly. Order the part directly via Metav Werkzeuge or consult the team for application advice. T-slot nut No. 6322A by AMF — nominal groove 18/20 mm, for fixed mounting A T-slot nut No. 6322A engineered for fixed mounting in machine and fixture grooves, providing a precise seating solution for profile-based assemblies. Fixed-mount design for secure assembly Fits nominal groove 18 mm (machine) / 20 mm (fixture) Compatible with M6 x 16 fasteners AMF quality with precise fit Precise seating for mixed groove systems The design delivers a repeatable, tight fit for combination applications where machine grooves and fixture slots differ. With nominal groove compatibility at 18 mm on machines and 20 mm on fixtures, the component maintains alignment under load and simplifies part selection in mixed environments. This precision reduces variability during setup and supports reliable positioning of tooling and workpieces. The low profile assists in maintaining compact assemblies without sacrificing contact stability, which is particularly valuable in constrained toolrooms and modular jig systems. Secure fixed mounting that speeds up production A fixed-mount configuration ensures stable clamping for repetitive cycles and heavier loads. The specification for M6 x 16 fasteners provides a clear, standardised interface for common assembly hardware, enabling quick installation with off-the-shelf screws. The robust seating principle reduces micro-movement and the risk of displacement during machining or inspection runs, which translates directly into fewer reworks and shorter machine downtime. Emphasis on measurable compatibility allows engineering teams to plan fixture layouts with predictable clamping performance. Practical installation and compatibility notes for workshop use Installation is straightforward when aligned with the groove nominal sizes; correct seating depth and orientation prevent twisting and ensure maximum contact area. The component is suitable for profile-based clamping systems and modular fixturing where a fixed anchorage is required rather than sliding adjustment. For procurement and layout planning, the clear designation of groove sizes and fastener compatibility supports parts lists and BOMs. When integration with existing fixtures is necessary, matching the nominal groove and fastener standard avoids unnecessary modifications and keeps assembly time to a minimum. For reliable fixture assembly with AMF components, contact Metav Werkzeuge for procurement guidance and technical clarification — info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and delivery options. Technical data Article number: 4000833237NW Type: Nr. 6322A Product: Nutenstein (T-slot nut) Manufacturer: AMF Packaging unit: 1 Core dimensions Nominal groove (machine): 18 mm Nominal groove (fixture): 20 mm Height HL: 5 mm Suitable fastener: M6 x 16 Special features Fixed mounting design Label: Nutenstein Nr.6322A Nennmaß der Nut 18/20mm z.Festmontage AMF UID: 4000833237NW FAQ What groove sizes does this T-slot nut fit? The T-slot nut No. 6322A fits nominal groove sizes of 18 mm for machine grooves and 20 mm for fixture grooves, allowing use across mixed-profile systems. Which fastener is specified for secure installation? Installation requires an M6 x 16 fastener; this specification for the AMF T-slot nut No. 6322A ensures standardised, reliable clamping. Is this component suitable for fixed, non-adjustable mounting? Yes — the product is designed for fixed mounting, providing a stable anchorage where sliding or quick repositioning is not required. Can this part be used in modular fixturing systems? The design is compatible with profile-based fixturing and modular assemblies where groove nominal sizes match 18/20 mm, making it suitable for many workshop and production setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Nutenstein mit M14 Gewinde DIN 508, für T-Nut 18mm, Festigkeitsklasse 10 - AMF
T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF – T-Nutenstein für Spanntechnik T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF sorgt für sichere und normkonforme Befestigung von Spannmitteln und Vorrichtungen in T-Nuten mit 18 mm Breite. Hohe Festigkeit Klasse 10 Passend für T-Nut 18 mm M14 Gewinde für sichere Befestigung Entspricht DIN 508 Werksnorm Robuste Verbindung für Maschinen und Vorrichtungen Der T-Nutenstein wurde entwickelt, um Bauteile und Spannmittel in T-Nuten wirtschaftlich und zuverlässig zu befestigen. Durch die DIN 508-Konformität ist eine Austauschbarkeit mit etablierten Maschinentischen und Aufspannsystemen gewährleistet, was Rüstzeiten reduziert und die Planbarkeit in der Fertigung erhöht. Die Anwendung eignet sich besonders für Werkstatt, Maschinenbau und Vorrichtungsbau, wenn es auf stabile, standardisierte Befestigungen ankommt. Belastbarkeit und Effizienz im Betrieb Dank Festigkeitsklasse 10 bietet der Nutenstein hohe Tragfähigkeit und beständige Kraftübertragung beim Spannen. Das M14-Gewinde erlaubt die Verwendung handelsüblicher Schrauben und reduziert die Teilevielfalt in der Werkstatt. Folge: kürzere Montagezeiten und geringere Stillstandsrisiken bei Indexwechseln oder Nachrüstungen. Diese Eigenschaften unterstützen eine effiziente Fertigungsorganisation und verbessern die Prozesssicherheit. Passgenauigkeit und einfache Montage Mit einer Einbaubreite für T-Nut 18 mm und einer Höhe 20 mm fügt sich der Nutenstein in gängige Aufspann-Standards ein. Die kompakte Bauweise ermöglicht flexible Positionierung in Nutenleisten, während die Gewindegröße die Anpassung an unterschiedliche Spannkräfte erlaubt. Anwender profitieren von einfacher Handhabung und klarer mechanischer Funktion ohne zusätzlichen Fräsaufwand oder spezielle Werkzeuge. Zielgruppe und Anwendungsbeispiele Konzipiert für Konstrukteure, Instandhalter und Betreiber von Werkzeugmaschinen, bietet der Nutenstein eine praxisnahe Lösung für Serien- und Einzelspannplätze. Typische Einsätze sind das Befestigen von Aufspannplatten, Anschlägen oder Maschinenhilfen sowie die Nachrüstung bestehender T-Nut-Tische, wenn Normkonformität und Belastbarkeit gefragt sind. Für eine zuverlässige, normgerechte Befestigung empfehlen wir den Einsatz dieses Nutensteins von AMF; Beratung und Lieferung erfolgen über Metav Werkzeuge – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 4000833206NW Marke: AMF Produktart: T-Nutenstein Norm: DIN 508 Fakten Höhe: 20 mm T-Nut: 18 mm Gewinde: M14 (metrisches Gewinde) Festigkeitsklasse: 10 Axite-Werte: A 17,7; E 28; K 10 Besonderheiten DIN 508 (Norm für T-Nutensteine) Werksnorm T-Nut 18mm M14 AMF Verpackungseinheit: 1 FAQ Wie montiere ich den T-Nutenstein korrekt? Die Montage erfolgt in der passenden T-Nut; der T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF wird in die Nut eingeschoben und mit einer geeigneten M14-Schraube gespannt. Achten Sie auf saubere Nuten und passende Schraubenlänge. Für welche T-Nuten ist dieser Nutenstein geeignet? Der Nutenstein ist für T-Nut 18 mm ausgelegt und entspricht der DIN 508, wodurch er in standardisierte T-Nuten von Maschinentischen und Aufspannsystemen passt. Welche Vorteile bietet die Festigkeitsklasse 10? Die Festigkeitsklasse 10 garantiert hohe Zug- und Druckfestigkeit, was sichere Spannkräfte und lange Standzeiten bei wiederholter Belastung ermöglicht. Enthält die Artikelnummer weiterführende Informationen? Die Artikelnummer 4000833206NW identifiziert den Nutenstein im Sortiment; für Bestell- und Verfügbarkeitsanfragen nutzen Sie bitte die Angabe zusammen mit Marke und Produktart. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M10 DIN 508 With Strength Class 10 - AMF
Take advantage of a DIN 508‑compliant design combined with an M10 internal thread and strength class 10 for consistent clamping performance in 18 mm T‑slot profiles; order or request advice directly via Metav Werkzeuge for seamless integration into modular fixturing. T-slot nut (DIN 508) — T‑nut, 18 mm T‑slot, M10 thread, AMF The T-slot nut (DIN 508) is a factory‑standard T‑nut designed to secure fixtures and components in 18 mm T‑slot profiles for machine tables and modular assemblies. Compliant DIN 508 standard Fits 18 mm T‑slot profiles M10 internal thread for standard bolts High load capacity, strength class 10 Reliable clamping for modular assemblies The T‑slot nut offers a straightforward solution for secure mounting in profile‑based systems. Its adherence to DIN 508 ensures dimensional compatibility and repeatable mounting results across machine tables and fixture systems. The combination of the M10 thread with compact mounting dimensions provides a robust connection that keeps clamping hardware aligned under repetitive loads, reducing setup time and improving process reliability. Thread integrity and grade‑based load safety Designed with strength class 10, the component provides enhanced tensile and shear resistance compared with lower classes. The internal M10 thread accepts commonly used bolts and allows uniform torque transmission for consistent clamping force. Reference installation dimensions are given as A: 17.7 mm, E: 28 mm and K: 10 mm, which serve as quick checks during planning and allow engineers to verify compatibility with existing fixturing systems before procurement. Practical handling and workshop benefits Engineers and fitters will appreciate the compact footprint and clear specification set that simplifies BOM entries and inventory management. The factory standard format reduces the need for custom machining of insert points and streamlines assembly procedures. When combined with a controlled parts supply from a single source, the element contributes to shorter assembly cycles and a more predictable production flow, supporting both small workshops and larger production lines. For compatibility checks or procurement assistance, contact Metav Werkzeuge with SKU 4000603167NW; consultants at Metav Werkzeuge provide detailed advice and supply direct from Emmerich for reliable delivery and technical clarification. Technical Data Article number: 4000603167NW Label: T‑Nutenstein (DIN 508) Werksnorm T‑Nut 18mm M10 AMF Brand: AMF Facts Standard: DIN 508 T‑slot size: 18 mm Height: 20 mm Thread: M10 Reference dimensions: A: 17.7 mm, E: 28 mm, K: 10 mm Strength class: 10 Packaging unit: 1 Special features Factory standard T‑nut for industrial fixturing Internal metric thread for standard bolts Compact dimensions for tight assemblies Consistent specification for repeatable setups FAQ What T‑slot width is this nut intended for? The T‑slot nut is designed for 18 mm T‑slot profiles and provides secure clamping when installed in corresponding slots. Which thread size does the component use? This T‑nut features an M10 internal thread suitable for standard M10 bolts and clamping elements. Is the component compliant with recognised standards? Yes, the product conforms to DIN 508, ensuring dimensional compatibility with standard machine tables and fixture profiles. What load class does the nut have? The part is specified as strength class 10, offering higher mechanical resistance for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M12 DIN 508 High Strength Class 10 - AMF
Take advantage of a standardised clamping solution that combines DIN 508 conformity, precise fit for 18 mm T-slots and a robust M12 threaded connection to secure fixtures reliably — order directly via Metav Werkzeuge or ask our consultants for compatibility advice. T-slot nut (DIN 508) AMF — 18 mm, M12 thread The T-slot nut (DIN 508) AMF is a standard clamping element designed for secure fastening in 18 mm T-slots on machine tables and jigs. Conforms to DIN 508 standard Fits 18 mm T-slots precisely M12 thread for strong clamping Strength class 10 for high load capacity Consistent compatibility with machine-table standards Built to DIN 508, this T-slot fastener ensures interchangeability across standard machine tables and modular fixtures. Conformity to the standard reduces procurement complexity and minimises setup errors when replacing or adding clamps. The standardised geometry supports predictable clamping behaviour, so maintenance cycles and tool changes proceed with less downtime and clearer spare-part management. High-strength threaded connection for secure setups The M12 threaded connection combined with strength class 10 delivers a reliable load-bearing interface for medium to heavy clamping tasks. A higher strength class indicates enhanced tensile and yield performance, which reduces deformation under tightening and maintains clamping force over repeated cycles. This results in fewer retorques and a consistent clamping result that supports machining accuracy and workplace safety. Clear dimensional data to match fixture requirements Key dimensions are provided for precise integration into assemblies: height 20 mm, with axial values A: 17.7 mm, E: 28 mm, K: 10 mm noted in the technical details. These measurements assist engineers in verifying clearance, thread engagement and washer or bolt selection. The factory-standard specification simplifies parts lists and ensures the component aligns with existing modular tooling without guesswork. For a DIN 508-compliant clamping solution from AMF and fast availability through Metav Werkzeuge, request stock details or technical clarification referencing SKU 4000603168NW Technical data Article number: 4000603168NW Product: T-slot nut Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M12 AMF Manufacturer: AMF Facts Height: 20 mm T-slot width: 18 mm Thread: M12 Standard: DIN 508 Packaging unit: 1 Axial data: A: 17.7 mm; E: 28 mm; K: 10 mm Strength class: 10 Special features Conforms to DIN 508 Factory standard for 18 mm T-slots High-strength M12 thread Intended for machine-table clamping and fixtures FAQ What T-slot size does this component suit? The T-slot nut (DIN 508) AMF is designed specifically for 18 mm T-slots, ensuring a precise fit for standard machine tables. What thread size is provided? The component features an M12 internal thread for bolt engagement and secure clamping. Is the nut compliant with an industry standard? Yes — the fastener is manufactured to DIN 508, which standardises dimensions and fit for T-slot nuts and supports interchangeability. What is the indicated strength class? The product is specified with strength class 10, indicating a high-grade threaded connection suitable for demanding clamping tasks. How is the item supplied for inventory planning? The packaging unit is listed as 1, and the article number is 4000603168NW for ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M16 Rhombic High-Strength Class 10, Height 20mm - AMF
Take advantage of a compact, high‑tensile fastening solution that combines a rhombic profile, M16 thread and compatibility with an 18 mm T‑slot for reliable fixture clamping. Order the AMF T‑slot nut directly via Metav Werkzeuge or consult the advisers for application-specific guidance. T‑Nut No. 510 — Rhombic T‑slot Nut for 18 mm T‑slots, M16 Thread (AMF) The T‑Nut No. 510 is a rhombic T‑slot nut designed for secure clamping in 18 mm T‑slots, suitable for fixtures, jigs and modular machining setups. Rhombic profile for positive locking Fits 18 mm T‑slot systems M16 thread for high clamping force Strength class 10 high tensile design Robust clamping that keeps fixtures secure and repeatable The rhombic profile provides a positive locking geometry that reduces rotation and slippage under load, which is essential for repeatable set‑ups in production and toolroom environments. The combination of an M16 thread and strength class 10 construction translates into higher allowable clamping torque compared with lower grades, enabling tighter fixation of workpieces and fixturing elements. This results in fewer re‑clamps, shorter machine downtime and a more consistent machining process, improving overall throughput without compromising stability. Fast installation and straightforward integration into modular systems The compact form factor and standard dimensions mean straightforward installation into common T‑slot tables and extruded profiles. The designation for an 18 mm T‑slot ensures compatibility with widely used machine tables and clamping rails, while the rhombic shape makes positioning precise and self‑centering when tightened. For planners and shop floor personnel, this reduces assembly time and simplifies fixture design: the nut acts as a secure anchor point, enabling rapid adjustments and modular reconfiguration with minimal tooling investment. Reliability and supply backed by an experienced partner Delivered in single units for exact planning, the component is produced for durability under frequent use and is intended for heavy‑duty clamping tasks. Metav Werkzeuge combines logistics and quality control to provide consistent availability and inspection as part of a broader offering of precision products; this includes a large catalogue and established trust across industrial customers. For procurement and production managers, the documented strength class 10 rating and standard 18 mm interface make specification straightforward and reduce the need for bespoke fastening solutions. For heavy‑duty fixturing with AMF T‑Nut No. 510, request supply and expert advice from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data Article number: 4000833219NW Label: T‑Nutenstein No. 510 T‑Nut 18mm M16 rhombic AMF Type: No. 510 Product type: T‑slot nut Manufacturer: AMF UID: 4000833219NW Packaging unit: 1 Core dimensions T‑slot width: 18 mm Height: 20 mm Thread: M16 Strength class: 10 Addition A: 17.7 Addition E: 28 Addition K: 10 Special features Rhombic profile High‑tensile design AMF brand FAQ Which slot systems is this nut compatible with? The T‑slot nut is designed for 18 mm T‑slot systems; the rhombic profile ensures positive locking in compatible machine tables and extruded rails. What thread size does the nut use and what does that allow? The nut features an M16 thread, which permits higher clamping forces suitable for robust fixture assemblies and is standard for many heavy‑duty clamping applications. How does the strength class affect performance? With strength class 10, the component offers elevated tensile properties compared with lower classes, improving resistance to shear and enabling higher tightening torques in demanding fixtures. Is the geometry suitable for repeatable fixturing? Yes — the rhombic profile provides positive engagement that reduces rotation and drift, supporting repeatable positioning in jigs and modular fixtures using this AMF T‑slot nut (SKU 4000833219NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut 18mm M16 High Strength Class 10, DIN 508 - AMF
Take advantage of a DIN 508‑compliant design and M16 thread compatibility for reliable fixture assembly; the compact 20 mm height and 18 mm T‑slot fit make this T‑slot nut an efficient choice for standard clamping operations. Order the part directly via Metav Werkzeuge or consult the team for application guidance. T‑Nut 18mm M16 AMF — T‑slot nut for 18 mm T‑slots with M16 thread T‑Nut 18mm M16 AMF provides standardised fixation for clamping and fixturing in 18 mm T‑slot systems, engineered for repeatable engagement and predictable load transmission. Standard‑compliant DIN 508 Fits 18 mm T‑slots M16 internal thread Strength class 10 Consistent clamping performance for repetitive fixturing The component is designed to match the geometric requirements of DIN 508, which ensures a predictable fit in corresponding machine table grooves. This standardisation reduces setup variability and speeds up fixture changeovers, delivering measurable efficiency in production environments. The compact 20 mm height and form factors listed in the technical data contribute to stable seating and help to maintain alignment under clamping loads. Secure load transfer with M16 fastening Featuring an M16 thread, the nut mates with commonly used metric fasteners to provide robust clamping capacity. The combination of the thread size and the noted strength class 10 supports higher preload values where required, making the component suitable for medium‑duty to heavy‑duty applications in jigs, fixtures and workholding assemblies. The threaded interface is intended for straightforward use with standard bolts and threaded studs, simplifying maintenance of clamping systems. Direct compatibility with 18 mm T‑slot systems The geometry matches an 18 mm T‑slot profile, allowing the nut to slide into the slot and locate reliably along the table. This makes the part useful for modular fixturing where frequent repositioning is needed. The design parameters identified in the technical data (A, E, K dimensions) describe the engagement geometry and support predictable interaction with T‑slot rails and securing elements, which is critical for repeatable machining set‑ups. Workshop logistics and integration benefits With a single‑piece design and a packaging unit: 1, the component is easy to stock and issue for one‑off repairs or for fitting into existing sets of clamping hardware. The standard conformity and clear specification reduce the need for measurements on arrival and simplify procurement decisions. For purchasing managers seeking reliable supply and a consistent quality filter for the European market, Metav’s distribution and stock handling provide transparent order fulfilment from Emmerich. Contact Metav Werkzeuge for tailored advice on selection and availability of AMF T‑slot nuts, or request further technical clarification by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833207NW Label: T‑Nutenstein DIN 508 T‑Nut 18mm M16 AMF Manufacturer: AMF Product type: T‑slot nut Facts Height: 20 mm T‑slot width: 18 mm Thread size: M16 Strength class: 10 A: 17.7 mm E: 28 mm K: 10 mm Packaging unit: 1 Special features Conforms to DIN 508 Suitable for clamping and fixturing in 18 mm T‑slots Compatible with standard M16 fasteners SKU/UID: 4000833207NW FAQ What slot size is this nut intended for? The nut is designed for an 18 mm T‑slot, providing standard engagement geometry for that slot width. Which thread does the nut accept? The component accepts an M16 fastener thread, compatible with commonly used metric bolts and studs. Is the nut specified to any standard? Yes, the design conforms to DIN 508, ensuring predictable fit and interchangeability in compliant T‑slot systems. What is the height of the nut and why does it matter? The nut has a height of 20 mm, which affects the seating depth and clearance in the slot and contributes to stable clamping. What strength class is indicated for this part? The data lists strength class 10, supporting higher preload and reliable load transfer for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut M16 DIN 508 24mm Height, Strength Class 10 - AMF
The combination of DIN 508 conformity, a 20 mm T-slot fit and an M16 internal thread ensures reliable, standardised clamping for machine tables and fixtures; pairing these features with the strength class 10 rating supports demanding workshop applications. Order directly via Metav Werkzeuge or consult the specialists for tailored advice. AMF T-slot nut (DIN 508) — 20 mm, M16 thread The T-slot nut (DIN 508) AMF is a workshop-grade fastening element for secure fixture assembly in 20 mm T-slots on machine tables and extrusion profiles. DIN 508 standard compliance Fits 20 mm T-slots M16 internal thread Strength class 10 Consistent, standardised clamping that saves setup time The DIN 508 conformity guarantees interchangeability across compatible fixtures and table systems, simplifying procurement and reducing downtime. Using a standard T-slot insert that matches the 20 mm slot dimension avoids trial-and-error matching and enables quick replacement during retooling. This leads to shorter set-up times and predictable clamping behaviour, which benefits production planning and repeatable processes. Robust thread and load capability for secure joins With an M16 internal thread and a strength class 10 rating, the component provides a high-capacity threaded interface for clamping bolts and studs. The robust thread dimension allows the use of common metric fasteners, giving flexibility in selecting bolt grades and lengths suitable for the application. Such mechanical characteristics translate into dependable clamping force and stable fixturing under machining or assembly loads. Clear dimensions and workshop practicality Key dimensional values (for example A: 19.7, E: 32, K: 12, height: 24) permit straightforward integration into existing fixtures and CAD setups without guesswork. The compact geometry of the insert supports tight packing in multi-fixture arrangements and enables precise positioning along a T-slot. The simple form factor makes handling, inspection and inventorying easy for workshop staff and reduces the risk of fitting errors. Compatibility and procurement advantages Selecting a component that adheres to a recognised standard removes uncertainty in cross-sourcing and maintenance. The standardised design of this T-slot insert supports compatibility with a broad range of clamping systems and profile suppliers, facilitating smoother supply-chain decisions. Where exact specifications are critical, the listed numerical attributes allow rapid verification against technical drawings. For procurement or technical clarification on the AMF T-slot nut, contact Metav Werkzeuge for expert guidance and immediate order processing Technical data Article number: 4000833208NW Product: T-slot nut Manufacturer: AMF Facts T-slot width: 20 mm Thread: M16 Height: 24 mm A: 19.7 E: 32 K: 12 Strength class: 10 Packing unit: 1 Standard: DIN 508 Special features DIN 508 standardised form Designed for machine table T-slots Internal metric thread for common bolts Compact geometry for dense fixtures FAQ What slot size is the nut designed for? The nut is designed for a 20 mm T-slot and matches standard 20 mm profile systems and machine table grooves. Which thread size fits this T-slot nut? This T-slot insert features an M16 internal thread suitable for M16 bolts and studs. Is the nut compliant with any standards? Yes, the component conforms to DIN 508, ensuring interchangeability with other standardised T-slot hardware. What is the strength rating of the part? The item is specified with strength class 10, indicating a high-capacity threaded connection for demanding fixtures. What dimensions are available for integration checks? Key dimensions include A: 19.7, E: 32, K: 12 and a height of 24, allowing precise fit verification. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Nutenstein No. 6322B 18mm Slot Width For M6 x 16 Fastening - AMF
Robust fixing for 18 mm T-slots and compatibility with M6 x 16 fasteners deliver secure clamping with minimal profile height; the compact 10 mm section reduces interference in confined assemblies. Order the AMF Nr. 6322B directly via Metav Werkzeuge or consult our specialists for application advice. Nr. 6322B T-slot nut — 18 mm nominal slot, for M6 x 16 fasteners (AMF) The Nr. 6322B T-slot nut is a compact fastening element intended for machines, fixtures and worktables with an 18 mm T-slot, optimised for fixed mounting and standard metric fasteners. Fits 18 mm T-slots Compatible with M6 x 16 fasteners Compact 10 mm profile height Designed for fixed mounting Secure clamping for standard 18 mm tables The component provides a dependable clamping point in 18 mm T-slots, ensuring repeatable positioning of fixtures and workpieces. Its compatibility with M6 x 16 fasteners allows the use of common metric screws for straightforward assembly. As a result, the element reduces lateral play and secures loads without the need for bespoke fasteners, enabling consistent machine set-ups and predictable clamping performance. Low profile that minimises interference With a 10 mm profile height and a total length of 22 mm, the fastening element keeps the clamped area compact and unobtrusive. The reduced height is beneficial where tool paths or adjacent components require clearance, and the compact length aids in installations where space along the slot is limited. These dimensional characteristics help maintain accessibility while providing the required clamping force. Simple integration into fixed mounting assemblies Designed for fixed mounting, the unit suits permanent or semi-permanent fixture arrangements on production jigs and tooling plates. Its standardised geometry for an 18 mm nominal slot simplifies inventory and replacement planning across multiple workstations. The compatibility with standard metric screws shortens assembly time and supports consistent torque settings during installation, which in turn contributes to repeatable clamping quality. Suitable choice for workshop and industrial applications Manufactured by AMF, this T-slot nut is a practical option for workshops and production environments seeking a reliable, compact fastening solution. Supplied as a single unit per packaging, the component supports targeted replacements and small-batch fitting tasks. The straightforward design focuses on function and compatibility, making it a pragmatic choice where proven standard parts are preferred over customised solutions. For secure, standardised T-slot fixation with an 18 mm nominal slot, request the AMF Nr. 6322B via Metav Werkzeuge in Emmerich for specification checks and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000833229NW Type: Nr. 6322B Manufacturer: AMF Product type: T-slot nut UID: 4000833229NW Dimensions Height: 10 mm Total length: 22 mm Nominal slot width: 18 mm Compatible fastener: M6 x 16 Special features Packaging unit: 1 Fixed mounting variant Label: T-slot nut Nr. 6322B — nominal slot 18 mm — fixed mounting — AMF FAQ What slot size is this T-slot nut designed for? The T-slot nut is sized for an 18 mm nominal slot width, providing a standard fit for 18 mm T-slots. Which screw size fits this nut? The component accepts M6 x 16 fasteners, allowing the use of standard M6 screws with a 16 mm length. What are the key dimensions of the fastening element? Key measurements are a 10 mm profile height and a total length of 22 mm, offering a compact footprint. Is this item suitable for permanent fixture mounting? Yes; the design is for fixed mounting, intended where a secure, lasting clamping point is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Slot Nut Nr. 6322A For Fixed Mounting, Fits M6 x 16 - AMF
Take advantage of a precise fit for mixed machine and fixture T-slots combined with a fixed‑mount design and compatibility with standard M6 x 16 fastenings for reliable clamping performance; order directly via Metav Werkzeuge or consult our technical team for application advice. Nr. 6322A T-slot nut (nominal slot 22/20 mm) by AMF The Nr. 6322A T-slot nut is a fixed‑mount fastening component for 22 mm machine and 20 mm fixture T‑slots, designed to accept M6 x 16 screw connections for secure clamping in workshop and production environments Precision fit for 22/20 mm T-slots Designed for fixed mounting Suitable for M6 x 16 fastening Robust AMF component quality Precise compatibility that shortens set‑up time The combination of nominal slot dimensions 22/20 mm and a finish intended for fixed mounting ensures a repeatable seating position in machine tables and dedicated fixtures, which reduces alignment effort during assembly and tool changes. A defined interface for M6 x 16 fastenings simplifies parts selection and inventory management, meaning less time is spent checking screw dimensions and more on productive machining. In practice, the precise fit results in improved clamping consistency and reduced rework. Secure fixed mounting for vibration‑resistant clamping The fixed‑mount configuration delivers a stable connection between workholding elements and the machine or jig, lowering the risk of micro‑movement under cutting loads. This stability supports process reliability and helps preserve dimensional tolerances across production batches. With a component designed specifically for fixed installation, maintenance cycles are more predictable and fixture life is extended through reliable force distribution during clamping operations. Clear integration into existing workshop systems Specified for standard T‑slot sizes and M6 screw engagement, the component integrates easily into conventional machine tables and tooling plates, allowing rapid retrofitting or new fixture design without specialist adapters. Technical teams benefit from the straightforward specification: nominal slot widths and screw compatibility are defined, simplifying drawings and procurement lists. For workshops seeking reproducible clamping results, this T‑slot nut supports consistent setup procedures and reduces assembly complexity. For tailored technical advice or to procure AMF fastening components, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s consultants will advise on compatibility and availability Technical data Article number: 4000833238NW Type: Nr. 6322A Product type: T-slot nut Manufacturer: AMF Packaging unit: 1 Facts Nominal slot (machine): 22 mm Nominal slot (fixture): 20 mm Suitable for screw: M6 x 16 HL: 2 mm Special features Fixed mounting design Precision fit for 22/20 mm T-slots AMF component label and SKU 4000833238NW FAQ What slot widths does this T‑slot nut fit? The T‑slot nut is specified for a 22 mm nominal machine slot and a 20 mm nominal fixture slot, providing a defined seating for mixed‑use setups. Which screw size is recommended for mounting? The component is designed to accept M6 x 16 screws for secure fixed mounting in compatible T‑slots. Is this item suitable for regular machine table retrofits? Yes, the nut’s specification and fixed‑mount design allow straightforward integration into standard machine tables and workshop fixtures. Does the product offer vibration resistance during heavy cutting? The fixed‑mount configuration and precision fit of the AMF T‑slot nut reduce micro‑movement and contribute to stable clamping under cutting loads. How is the item delivered and what is the packaging unit? The item is supplied with a packaging unit of 1 and is listed under SKU 4000833238NW for order reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com