63mm T-Slot Bolt 12mm M12 Grade 10.9 With Nut And Washer DIN 787 - AMF
Reliable, high-strength clamping for T-slotted tables: the combination of M12 engagement and Grade 10.9 performance delivers secure fixation and reduced rework in production environments — order via Metav Werkzeuge or consult our specialists for application matching. T-slot bolt DIN 787 — T-slot 12 mm, M12 thread, 63 mm, Grade 10.9 (AMF) The T-slot bolt DIN 787 is a high-strength fastener designed for secure clamping in T-slotted machine tables and fixture systems. Conforms to DIN 787 M12 metric thread T-slot width 12 mm Grade 10.9 high strength Durable clamping with reduced risk of failure Fasteners manufactured to Grade 10.9 provide elevated tensile properties compared with standard bolts, offering a dependable clamp under dynamic loads. The combination of a metric M12 thread and heat-treated strength class results in a tight joint that resists loosening and deformation during frequent setup changes. This translates into fewer interventions and longer periods of uninterrupted production when secure workholding is essential. Precision fit for T-slotted tables and fixtures Compliance with DIN 787 ensures a standardised shoulder and head geometry for insertion into T-slot 12 mm rails, so components seat consistently and without lateral play. The 63 mm overall length allows for sufficient thread engagement in typical clamping stacks, helping to maintain preload and prevent thread stripping. Explaining the standard in plain terms helps planners and buyers match the fastener to machine table profiles and clamping elements confidently. Practical dimensions and assembly advantages The package includes a mating nut and washer, enabling immediate assembly without sourcing additional components; this simplifies parts logistics and reduces BOM complexity. Precise axial measurements assist with setup calculation: A: 11.7; B: 40; E: 18; K: 7, providing clear guidance for designers and fitters working to tight tolerances. Delivered in single units for direct replacement or trial fit, the bolt supports modular clamping systems and straightforward retrofits. For specification advice or to secure reliable supply of AMF T-slot bolts, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our specialists will assist with technical matching, availability and delivery options. Technical data Article number: 4000833310NW Description: T-slot bolt DIN 787 T-Nut 12mm M12 L.63mm Grade 10.9 with nut and washer AMF Brand: AMF Facts Thread: M12 T-slot width: 12 mm Overall length: 63 mm Packaging unit: 1 Axial dimensions: A: 11.7; B: 40; E: 18; K: 7 Special features Conforms to DIN 787 Grade 10.9 high strength Includes nut and washer Designed for 12 mm T-slots FAQ What standard does this fastener meet? The bolt complies with DIN 787; the AMF T-slot bolt (SKU 4000833310NW) is manufactured to that standard for consistent head and shoulder geometry. What thread and slot size are specified? Thread is M12 and it is intended for a 12 mm T-slot; these dimensions suit common machine table profiles and clamping fixtures. Does the delivery include fastening accessories? Yes — the article description indicates the bolt is supplied with a nut and washer, allowing immediate assembly. What is the overall length and how does it affect clamping? Overall length is 63 mm; this provides sufficient thread engagement for reliable preload in typical clamping stacks. Are detailed dimensional values available for installation planning? Axial dimensions are provided: A: 11.7; B: 40; E: 18; K: 7, which assist in calculating clearances and stacking heights for precise installations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Bolt 18mm T-Slot M16 With Nut And Washer, Grade 8.8 - AMF
Benefit from a robust combination of grade 8.8 tensile strength, precise M16 thread engagement and compatibility with 18 mm T-slots for dependable fixture clamping and reduced setup time; order directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot bolt DIN 787 — M16, 18 mm T-slot, 63 mm length A durable AMF T-slot bolt manufactured to DIN 787 for secure clamping in 18 mm T-slots on machine tables and fixture plates. High tensile strength grade 8.8 Compatible with 18 mm T-slots Standard DIN 787 specification Includes nut and washer for assembly Secure clamping that keeps production moving The DIN 787 T-slot bolt delivers a predictable clamping solution with high tensile strength and a standardised head geometry that minimises slippage in machine table grooves. The M16 thread provides strong axial load capacity while reducing the need for frequent retightening; this translates into fewer interruptions during setup and a lower risk of workpiece movement under machining loads. By selecting a fastener with defined mechanical properties, production planners gain a measurable improvement in fixture reliability and process repeatability. Precise fit for standard machine tables and tooling Designed for use in an 18 mm T-slot, the fastener’s dimensions conform to established table and fixture systems, ensuring a consistent fit across compatible tooling. Conformity with DIN 787 means contractors and workshop engineers can rely on interchangeability when replacing or standardising clamping hardware. The defined geometry and thread specification simplify catalogue matching and make integration into tool lists straightforward, helping to speed purchasing decisions and reduce inventory complexity. Ready-to-use assembly reduces installation time Supplied complete with a nut and washer, the bolt is delivered as a ready-to-install fastener, eliminating the need to source separate components and accelerating the clamping process. With a total length of 63 mm, the fastener is suitable for many common clamping setups where a secure threaded engagement is required. The included washer helps distribute clamping forces evenly, protecting softer fixture surfaces and helping to maintain consistent torque readings across repeated assemblies. Practical benefits for workshops and production lines Adopting standardised T-slot fasteners supports lean workshop organisation: fewer unique parts, faster tool changes and a more predictable maintenance schedule. The combination of grade 8.8 strength and metric M16 thread makes the bolt suitable for medium to heavy clamping tasks without overengineering the solution. For planners and shopfloor technicians, this translates into improved uptime and a reliable baseline component for fixture design. For DIN 787-compliant clamping and advice on integrating this AMF T-slot bolt into existing tooling, contact Metav Werkzeuge for expert guidance and prompt supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833336NW Product type: T-slot bolt Standard: DIN 787 Brand: AMF Facts T-slot width: 18 mm Thread: M16 Total length: 63 mm Axite values: A: 17.7; B: 45; E: 28; K: 10 Pack unit: 1 Special features Grade 8.8 strength Includes nut and washer DIN 787 compliant FAQ What T-slot width is this bolt intended for? The bolt is designed for an 18 mm T-slot and matches standard table grooves used in many fixture systems. Which thread size does the fastener use? This fastener features an M16 thread, providing robust engagement for medium to heavy clamping tasks. Is the bolt supplied with assembly parts? Yes, the delivery includes a nut and washer, so the fastener is ready for immediate installation. What standard does the bolt comply with? The component is manufactured to DIN 787, ensuring dimensional compatibility with corresponding T-slot hardware. Can this bolt be used for heavy-duty clamping? With grade 8.8 tensile classification and an M16 thread, the bolt is suitable for many medium to heavy clamping applications where standardised performance is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Screw M10 Strength Class 10.9 With Nut And Washer, DIN 787 - AMF
Take advantage of a DIN‑compliant fastening solution that combines high tensile strength and standardised geometry for secure fixturing; the M10 thread and 63 mm overall length ensure reliable clamping in 10 mm T‑slot systems. Order the bolt via Metav Werkzeuge or consult our technical team for specification matching. T‑Slot Bolt DIN 787 — T‑slot 10 mm, M10 x 63 mm (AMF) The T‑Slot Bolt DIN 787 M10 x 63 mm is a high‑strength fastening element for machine tables and modular fixturing, designed to sit and lock securely in 10 mm T‑slots for precision clamping. DIN 787 standardised geometry Grade 10.9 high tensile strength Supplied with nut and washer Durable, standardised clamping for demanding fixtures The bolt meets DIN 787, providing a standardised profile that simplifies component selection and ensures compatibility across many clamping systems. Manufactured to Grade 10.9, the fastener delivers higher yield and tensile properties compared with lower grades, which translates into greater clamping security and fewer retightening cycles. For operations that demand repeatable locating and minimal play, the standard geometry reduces setup time and helps maintain machining tolerances during production runs. Fast and reliable assembly with included accessories Equipped with an M10 thread and a total length of 63 mm, the fastener suits a wide range of table plates and clamping stacks. The scope of delivery includes a nut and washer, enabling immediate installation without sourcing additional parts and reducing assembly steps. The combined dimensions are optimised for direct use in 10 mm T‑slot channels, improving throughput during fixture changes and decreasing machine downtime through quick, dependable fastening. Designed for industrial workshop efficiency and compatibility The T‑slot design is intended for repetitive clamping in production and maintenance contexts where consistency and robustness matter. Compatibility with a 10 mm T‑slot makes the fastener suitable for common milling tables and modular fixture systems. The component’s standardisation supports inventory rationalisation and procurement efficiency, while the high‑grade specification contributes to a longer service life under cyclic loads. Where traceable conformity and predictable behaviour under load are required, this solution supports dependable workshop workflows. For expert guidance on integrating AMF T‑slot bolts into existing fixturing systems, contact Metav Werkzeuge for personalised advice and supply from our Emmerich location. Technical data Article number: 4000833306NW Norm: DIN 787 Product type: T‑slot bolt Brand: AMF Core dimensions T‑slot size: 10 mm Thread: M10 Overall length: 63 mm Grade: 10.9 Packing unit: 1 Features & additions Supplied with nut and washer Axial additions: A: 9.7; B: 45; E: 15; K: 6 FAQ Is this fastener suitable for standard 10 mm T‑slots? Yes. The fastener is specified for a 10 mm T‑slot and is manufactured to DIN 787 dimensions to ensure fit and function in standard T‑slot systems. What are the thread type and total length of the bolt? The bolt features an M10 thread with an overall length of 63 mm, designated under article number 4000833306NW. Does the scope of delivery include fastening accessories? Yes. The product is supplied complete with a nut and washer to enable immediate assembly. What strength class does the bolt have? The fastener is specified as Grade 10.9, offering high tensile and yield performance suitable for demanding clamping applications. Is the component suitable for repeated fixture changes in a production environment? Yes. The standardised geometry and high‑grade specification support reliable repeated clamping and reduced setup time in production workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm 18mm T-Slot Screw M16 Grade 8.8 With Nut And Washer, DIN 787 - AMF
Robust fastening for fixture tables: the T-slot bolt DIN 787 combines standard-compliant design and a metric M16 thread with an 80 mm length for secure clamping, supplied complete with nut and washer; order directly via Metav Werkzeuge or consult the technical advisors for specification support. AMF T-slot bolt DIN 787 — 18 mm T-slot, M16 × 80 mm AMF T-slot bolt DIN 787 for machine tables and fixture systems, designed to secure workpieces and tooling in 18 mm T-slots. DIN 787 standardised design Suitable for 18 mm T-slot rails Metric M16 thread for strong clamping Supplied with nut and washer Secure clamping that fits standard fixtures The T-slot bolt is produced to DIN 787 dimensions and is intended for industrial and workshop fixture systems where repeatable positioning is required. The combination of an M16 thread and an 80 mm overall length provides a reliable grip through standard clamping plates and fixtures; this ensures consistently low setup times and stable fixation during machining or assembly, improving cycle-time efficiency. Compatibility with 18 mm T-slot rails reduces the need for custom adapters and supports quick integration into existing systems. High-strength performance for demanding applications Manufactured for strength and operational reliability, the fastener is specified as grade 8.8 in the product label, indicating a hardened steel class suited to medium- to high-load clamping tasks. The inclusion of a nut and washer in the delivery supports even pressure distribution and reduces the risk of loosening under vibration. Where repeatable torque application is required, this bolt’s mechanical rating allows predictable clamping forces and contributes to a safer, more stable production environment. Clear dimensions and quick verification at the workbench Critical dimensions are provided for rapid assessment and installation. The head and shank geometry (A: 17.7 mm, B: 55 mm, E: 28 mm, K: 10 mm) enables verification against fixture drawings and ensures the bolt seats correctly in the 18 mm T-slot. Such explicit measures assist in planning tooling layouts and avoiding assembly errors; the standardised geometry also simplifies inventory management by matching established fixture specifications. For reliable fixtures using AMF components, contact Metav Werkzeuge for ordering or technical clarification — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833337NW Manufacturer: AMF Product type: T-slot bolt Standard: DIN 787 UID: 4000833337NW Key dimensions T-slot width: 18 mm Thread: M16 Overall length: 80 mm Axite dimensions: A 17.7 mm; B 55 mm; E 28 mm; K 10 mm Features Supplied with nut and washer Grade: 8.8 (as stated in label) Packaging unit: 1 Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.80mm Güte 8.8 m.Mutter u.Scheibe AMF FAQ What T-slot size does this bolt fit? The AMF T-slot bolt DIN 787 is designed specifically for 18 mm T-slots and matches common fixture table profiles. Is the thread standard metric and what size is it? Yes, the fastener uses a standard metric M16 thread suitable for general fixture clamping applications. What does grade 8.8 indicate for performance? Grade 8.8 denotes a medium-high tensile strength class for steel fasteners; the AMF bolt’s specification supports reliable clamping under substantial loads while maintaining predictable elongation and torque behaviour. Are nut and washer included with the bolt? The delivery includes the corresponding nut and washer, allowing immediate installation and even load distribution across the clamped surface. Does the bolt comply with recognised standards for interchangeability? Compliance with DIN 787 ensures dimensional interchangeability with other components designed to the same standard, simplifying replacement and system planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Slot Bolt M12 12mm T-Slot With Nut And Washer Grade 10.9 - AMF
Take advantage of the combination of high clamping strength, DIN‑standard compatibility and complete fastening set for dependable fixture assembly; order the AMF T-slot screw directly via Metav Werkzeuge or consult our specialists for application advice. AMF T‑slot screw DIN 787 – M12 x 80 mm, Grade 10.9 The AMF T‑slot screw DIN 787 M12 x 80 mm serves as a high‑strength T‑slot fastener for standard 12 mm T‑slot profiles, engineered for machine fixtures, assembly tables and industrial tooling applications. Grade 10.9 high tensile strength Fits 12 mm T‑slot profiles Complete set with nut and washer DIN 787 compliant fastening Secure clamping with proven high‑strength performance The fastener is specified as Grade 10.9, indicating a high tensile class suitable for demanding clamping tasks; combined with the M12 thread, this produces a robust connection that reduces slippage and maintains positional accuracy under load. Manufactured to DIN 787, the design conforms to a recognised standard for T‑slot bolts, which simplifies engineering decisions and supports consistent assembly quality across fixtures. This technical reliability translates into fewer reworks and steadier production output. Precision fit for standard 12 mm T‑slot systems Designed for 12 mm T‑slot profiles, the screw’s geometry matches common machine‑table channels to ensure a secure engagement and predictable torque behaviour. The 80 mm overall length accommodates thicker clamping stacks, while the inclusion of nut and washer in the delivery means a complete fastening set is available straight away, shortening preparation time for installation. Clarifying the function of a T‑slot fastener: the head slides into the slot and, when tightened, converts axial clamping force into a secure hold against lateral displacement. Efficient installation and practical workshop advantages A standardised fastening such as this reduces selection time and simplifies inventory management in busy workshops and production facilities. With consistent dimensions and documented conformity to DIN 787, planning for fixture changes or repeat production runs becomes more straightforward, lowering downtime between jobs. Specification details such as thread size, slot compatibility and set contents support engineers and buyers in choosing the correct component for assembly and maintenance tasks, enhancing operational continuity. For procurement or application-specific advice on the AMF T‑slot screw and its suitability for particular fixtures, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical details and supply options. Technical data Article number: 4000833311NW Standard: DIN 787 Product type: T‑slot screw Brand: AMF Facts T‑slot width: 12 mm Thread: M12 Overall length: 80 mm Packing unit: 1 Special features Grade 10.9 Includes nut and washer Axite enrichment: A: 11.7; B: 55; E: 18; K: 7 FAQ Is this fastener compatible with 12 mm T‑slot profiles? Yes. The AMF T‑slot screw DIN 787 M12 x 80 mm is designed specifically for 12 mm T‑slot profiles and engages the slot geometry defined by that standard. What does Grade 10.9 indicate for this T‑slot screw? Grade 10.9 denotes a high tensile class for the bolt, giving increased clamping strength and resistance to shear compared with lower grades; the AMF item is intended for heavy‑duty fixture applications. Does the delivery include the necessary assembly parts? Yes. The product is supplied as a complete set with nut and washer included, enabling immediate assembly without sourcing additional components. Is the material or coating specified for corrosion resistance? The provided product data does not specify material or coating details; material/coating information should be checked on the technical datasheet before use where corrosion resistance is a requirement. Is the fastener manufactured to an established standard? Yes. The fastener conforms to DIN 787, ensuring standardised form and fit for T‑slot fastening applications; refer to SKU 4000833311NW for ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Slot Screw 14mm T-Slot M12 Grade 10.9 With Nut And Washer - AMF
Take advantage of the combination of DIN conformity, high tensile strength and precise T‑slot compatibility for reliable clamping performance in production environments; order the fastener directly via Metav Werkzeuge or consult our specialists if further specification is required. AMF T-slot bolt DIN 787 — 14 mm T-slot, M12, grade 10.9 A T-slot bolt DIN 787 engineered for secure clamping in 14 mm T‑slots on machine tables and tooling fixtures DIN 787 standard compliance High-strength grade 10.9 Fits 14 mm T-slots Includes nut and washer Consistent, standardised clamping for industrial use Conformity with DIN 787 ensures uniform dimensions and interchangeability across machine tables and clamping systems, simplifying parts management and reducing setup time. The combination of an M12 thread and a grade 10.9 specification delivers a high tensile rating suitable for demanding fixtures, so production runs remain stable and repeatable. This fastener is designed for systems that require both reliable clamping force and adherence to industrial standards. Precise fit for 14 mm T-slots and defined axial geometry Optimised for a 14 mm T‑slot, the fastener's geometry supports consistent seating and load distribution in the slot profile. The supplied dimensional values (Addition: A: 13.7 mm; B: 55 mm; E: 22 mm; K: 8 mm) indicate the axial and engagement measures relevant for selection and clearance checks on tables and fixtures. Clear dimensional data reduces trial-and-error during installation and helps engineers verify compatibility with existing tooling quickly. Durable components and ready-to-install supply Supplied complete with nut and washer, the assembly reduces procurement complexity and avoids mismatched components at installation. The grade 10.9 designation denotes a high-strength steel fastener designed to withstand the mechanical stresses typical of clamping operations, contributing to longer service intervals and lower maintenance frequency. Choosing a complete fastener assembly supports uptime and consistent clamping behaviour in workshop environments. Practical benefits for workshops and production planners Using a standardised T‑slot fastener streamlines inventory and assembly procedures, aiding lean production and minimising machine downtime. The clear specification and inclusion of the fastening hardware mean fewer order lines and faster fits on the shop floor, while conformity to recognised standards supports quality assurance and documentation. For buyers seeking dependable supply and technical advice, Metav Werkzeuge provides centralised sourcing and expertise tailored to precision workshop needs. For procurement or technical consultation on the AMF T-slot bolt DIN 787, contact Metav Werkzeuge in Emmerich for reliable supply and specification support Technical Data Article number: 4000833318NW Label: T-Nutenschraube DIN 787 T-Nut 14mm M12 L.80mm Güte 10.9 m.Mutter u.Scheibe AMF Manufacturer: AMF Packaging unit: 1 UID: 4000833318NW Facts Standard: DIN 787 T-slot width: 14 mm Thread: M12 Total length: 80 mm Axial dimensions (A/B/E/K): A 13.7 mm / B 55 mm / E 22 mm / K 8 mm Special features Grade 10.9 high-strength Includes nut and washer Product type: T-slot bolt (T-Nutenschraube) FAQ What T-slot width is this fastener designed for? This fastener is designed for a 14 mm T‑slot; the axial and engagement dimensions (A: 13.7 mm; B: 55 mm; E: 22 mm; K: 8 mm) support correct seating in that slot size. Which thread and length are specified for the bolt? The bolt uses an M12 thread and a total length of 80 mm as stated for the AMF T‑slot bolt DIN 787 (SKU 4000833318NW). Does the delivery include the matching nut and washer? Yes, the supply is complete with nut and washer included, reducing the need to source separate components for assembly. What does grade 10.9 indicate for this fastener? Grade 10.9 denotes a high-strength steel fastener suitable for demanding clamping applications, providing improved tensile performance over lower-grade alternatives. Is the fastener made to an industry standard for interchangeability? Manufactured to DIN 787, the fastener adheres to defined dimensions for interchangeability across compliant machine tables and clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com