Biological Microscope iScope IS.1153-PLi/DFi Trinocular Darkfield Plan IOS Objectives 4x/10x/40x/100x Köhler LED Illumination - Euromex

Take advantage of the combination of high-contrast darkfield optics, reliable Köhler LED illumination and a trinocular head for straightforward documentation — order the microscope directly via Metav Werkzeuge or request personalised technical advice for seamless integration into the laboratory. iScope IS.1153-PLi/DFi Biological Microscope — Trinocular darkfield system with Köhler LED (Euromex) The iScope IS.1153-PLi/DFi is a trinocular biological microscope optimised for darkfield observation and routine documentation in life science, teaching and clinical laboratory environments. Trinocular head for camera attachment Plan optics for flat field imaging Darkfield illumination for high contrast Köhler LED for even, long-life lighting Superior imaging that supports reliable analysis This laboratory-grade instrument combines Plan IOS objectives with an EWF 10x/22 mm eyepiece to deliver a flat field and clear resolution across the image plane. Plan optics correct for field curvature and ensure that measurements and visual assessments remain accurate from centre to edge, which is essential during microstructural analysis or specimen screening. The optical design reduces the need for frequent refocusing and supports consistent results in repetitive workflows. Enhanced contrast and stable illumination for delicate samples The integrated darkfield capability emphasises fine structural details by excluding direct light and highlighting scattered light from the specimen. When paired with Köhler LED illumination, users benefit from uniform brightness, adjustable contrast and lower thermal load on sensitive samples. LED lighting also provides long operational life and reduced maintenance compared with older lamp systems, supporting continuous use in busy laboratories with minimal downtime. Practical ergonomics and reliable sample handling A mechanical stage without rack overhang provides unobstructed movement and prevents accidental catches during stage travel, improving handling precision for slide scanning. The trinocular head permits simultaneous binocular viewing and camera mounting for image capture or documentation, facilitating teaching demonstrations, digital archiving and remote analysis. Robust mechanical components ensure repeatable positioning and reduce cumulative error during serial inspections. Relevant applications and support for confident integration This system is well suited to cell biology, microbiology teaching labs and specimen screening where contrast and documentation matter. The optical configuration supports both observation and digital capture workflows, helping laboratories to standardise procedures. If additional technical specifications or accessory recommendations are required, Metav Werkzeuge can provide detailed documentation and advise on compatible cameras and accessories to match the laboratory’s needs. Contact Metav Werkzeuge for tailored advice on integration, spare parts and delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt, expert support. Technical data Article number: IS.1153-PLi/DFi Name: iScope IS.1153-PLi/DFi Type: Biological microscope Brand: Euromex Facts Eyepieces: EWF 10x / 22 mm Objectives: Plan IOS 4x, 10x, 40x, 100x Special features Trinocular head Darkfield capability Mechanical stage without rack overhang Köhler LED illumination Series: iScope Category path: Microscopes > Upright microscopes > Darkfield microscopes FAQ What magnifications are available with this microscope? The iScope IS.1153-PLi/DFi is supplied with Plan IOS objectives at 4x, 10x, 40x and 100x together with an EWF 10x/22 mm eyepiece, providing a flexible range for routine laboratory work. Is the microscope suitable for image documentation? Yes, the trinocular head on the Euromex system allows simultaneous binocular observation and camera attachment for straightforward documentation and digital archiving. How does darkfield improve specimen visibility? Darkfield illumination enhances contrast by blocking direct light and visualising scattered light from structures; in this model the darkfield setup is complemented by Köhler LED for even, adjustable illumination with low thermal impact. Can sensitive biological samples be observed without heat damage? The Köhler LED lighting produces minimal heat at the specimen plane compared with traditional lamps, reducing the risk of thermal damage during extended observation. Where can I get accessories or further technical data? For accessory recommendations and complete technical documentation related to the iScope IS.1153-PLi/DFi, contact Metav Werkzeuge and request compatible cameras or spare parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.1153-PLPH Trinocular Phase Contrast Plan Objectives, Mechanical X-Y Stage - Euromex

Take advantage of precise phase‑contrast imaging, a trinocular head for straightforward documentation and a mechanical X‑Y stage for reliable specimen positioning — order the iScope directly via Metav Werkzeuge or consult the Emmerich team for configuration advice. Biological microscope iScope IS.1153-PLPH — Trinocular phase‑contrast instrument with plan optics The Biological microscope iScope IS.1153-PLPH is a laboratory instrument designed for phase‑contrast observation and documentation in education and life‑science applications, featuring plan phase‑contrast objectives and a mechanical X‑Y stage. Trinocular head for camera attachment Plan phase-contrast objectives EWF 10x/20 mm widefield eyepieces Mechanical X‑Y stage for precise specimen control Consistent phase‑contrast for transparent samples The combination of Plan phase‑contrast objectives and a dedicated phase‑contrast optical path delivers enhanced contrast for unstained, transparent specimens. This optical design reduces spherical aberration across the field, which results in more even image quality and improved detail resolution for cellular structures. The inclusion of EWF 10x/20 mm eyepieces supports comfortable observation and a wide field of view, making prolonged inspection less fatiguing while maintaining critical image information for analysis. Reliable documentation and camera integration A Trinocular head enables simultaneous observation and digital capture, allowing image acquisition without interrupting the inspection workflow. The camera port is suitable for industry‑standard microscope cameras, which facilitates documentation and teaching demonstrations. The built‑in iCare‑Sensor provides monitoring of operational parameters, supporting reproducible imaging conditions and assisting in consistent data collection when documenting experiments or producing reports. Precise specimen handling for repeatable results The Mechanical X‑Y stage offers controlled specimen movement and fine positioning, which is essential for systematic scanning and comparison of multiple fields of view. This level of control benefits both routine laboratory tasks and structured training sessions where repeatability is important. The robust stage mechanics contribute to long‑term stability and reduce drift during extended observations, which is particularly valuable when recording time‑lapse sequences or comparing consecutive samples. Designed for laboratory and teaching environments Built with educational and life‑science laboratories in mind, the instrument combines intuitive handling with professional optics to support both instruction and research. The configuration balances image quality and operational convenience, making it suitable for classroom demonstrations, routine diagnostic work and initial research tasks where phase contrast is required. The overall design emphasises dependable performance and ease of integration into existing laboratory workflows. Contact Metav Werkzeuge today to discuss configuration options for the iScope IS.1153-PLPH and to arrange a tailored delivery from our Emmerich team Technical data Article number: IS.1153-PLPH SKU: IS.1153-PLPH Model series: iScope Product type: Biological microscope Brand: Euromex Facts Eyepieces: EWF 10x/20 mm Special features Trinocular head Plan phase-contrast objectives Mechanical X‑Y stage iCare‑Sensor Application: Phase contrast microscopy FAQ What magnification do the supplied eyepieces provide? The instrument is supplied with EWF 10x/20 mm widefield eyepieces, which offer an expanded field of view for comfortable, detailed observation with the plan optics. Can the trinocular head be used with a camera? Yes, the trinocular head is intended for camera attachment and supports standard microscope camera integration for documentation alongside live observation. Is this microscope suitable for teaching laboratories? The combination of robust mechanics, plan phase‑contrast objectives and easy camera integration makes the microscope well suited to both teaching and routine laboratory use. How does the mechanical X‑Y stage benefit routine work? The Mechanical X‑Y stage provides precise specimen positioning and repeatability, which supports systematic scanning and comparison of multiple fields of view. What role does the iCare‑Sensor play in imaging? The iCare‑Sensor monitors key operational parameters to help maintain consistent imaging conditions and improve reproducibility during documentation and analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.1153-PLPHi Trinocular Phase Contrast Plan Objectives, Köhler LED - Euromex

Take advantage of high-contrast phase imaging and reliable sample control through plan phase-contrast optics and a mechanical X‑Y stage for consistent laboratory results; order the iScope IS.1153-PLPHi directly via Metav Werkzeuge or ask our consultants for tailored configuration advice. iScope IS.1153-PLPHi — Biological microscope with phase contrast and trinocular head (Euromex) The iScope IS.1153-PLPHi is a laboratory biological microscope optimised for phase-contrast observation and digital documentation in education and life-science routines. Trinocular head for camera attachment Phase contrast optics for transparent samples Köhler LED illumination for even field Mechanical X‑Y stage with smooth travel High-contrast imaging for unstained specimens Phase contrast is the core capability that sets this instrument apart. Equipped with plan phase-contrast IOS objectives and EWF 10x/22 mm eyepieces, the instrument converts phase differences into visible contrast so transparent cells and tissues are rendered with clarity without staining. The combination of plan-corrected optics and phase rings ensures a flat field across the view and reduces optical aberrations; this yields images that are easier to quantify and reproduce in routine workflows. The optical design supports consistent interpretation of subtle morphological details, which benefits teaching labs and diagnostic preparations alike. Stable handling and integrated documentation workflow A trinocular head provides a direct path for camera integration while the mechanical X‑Y stage allows precise specimen positioning and repeatable scans across a slide. The wide-field eyepieces deliver a comfortable view for prolonged sessions and make alignment of the camera sensor straightforward. Mechanical stage control reduces sample repositioning time and increases throughput for serial observations. These elements combine to offer an efficient microscopy workflow where reproducible frame capture and reliable sample navigation become standard, reducing setup time and improving day-to-day productivity in practical teaching and research tasks. Consistent illumination and careful sample observation Illumination is provided by Köhler LED, delivering an even field and stable colour temperature that supports reproducible imaging and reduces thermal load on specimens. An iCare sensor is integrated to monitor illumination conditions and help maintain steady light levels throughout an examination; this contributes to less frequent adjustments and a lower risk of photobleaching during prolonged observations. Köhler alignment ensures even illumination across the field of view, which simplifies contrast balancing and enhances the quality of micrographs for documentation or image analysis workflows. Built for teaching, life-science labs and routine microscopy This model is tailored for environments that require robust optics, straightforward operation and the option to document results digitally. The instrument’s specification supports a broad range of applications from educational exercises to routine cell observations in life-science laboratories. The design emphasises stability and repeatability, offering users a dependable microscope that integrates easily into existing lab setups. For laboratories seeking accessible precision, the unit represents a practical balance of optical performance and operational reliability. For tailored technical advice or procurement of the Euromex iScope IS.1153-PLPHi, please contact Metav Werkzeuge in Emmerich for personalised configuration and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.1153-PLPHi SKU: IS.1153-PLPHi Label: Biological microscope iScope IS.1153-PLPHi Facts Eyepieces: EWF 10x/22 mm Head: Trinocular Illumination: Köhler LED Special features Trinocular head Phase contrast Plan phase-contrast IOS objectives Mechanical X‑Y stage iCare sensor Köhler LED illumination Manufacturer: Euromex Product type: Biological microscope Model series: iScope Category: Phase contrast microscopes FAQ Can a camera be attached to the microscope? The trinocular head of the iScope IS.1153-PLPHi allows direct camera attachment for digital imaging and documentation. Is the instrument suitable for observing unstained live cells? Yes, the phase contrast configuration with plan phase-contrast IOS objectives is designed for visualising unstained, transparent specimens. How does the Köhler LED benefit routine use? Köhler LED illumination provides even field lighting and stable colour temperature, supporting reproducible observations and clearer micrographs with the iScope IS.1153-PLPHi. Are the eyepieces suitable for wide-field observation? The EWF 10x/22 mm eyepieces offer a wide field of view, improving situational awareness at the eyepiece and easing camera alignment. Is this model appropriate for teaching laboratories? The combination of robust optics, simple operation and camera integration makes the iScope IS.1153-PLPHi well suited for educational settings and routine life-science tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.1153‑EPL/DF Trinocular Darkfield E‑Plan 4x/10x/40x/100x - Euromex

Take advantage of the combination of a trinocular head and E-Plan optics for clear darkfield imaging and straightforward documentation; order the biological microscope iScope IS.1153-EPL/DF directly via Metav Werkzeuge or ask our consultants if needed. iScope IS.1153-EPL/DF Biological Microscope — Trinocular head, Darkfield, E-Plan optics (Euromex) The iScope IS.1153-EPL/DF is a trinocular biological microscope configured for darkfield observation, designed for routine laboratory work and educational environments. Trinocular head for camera attachment Darkfield configuration for enhanced contrast E-Plan objectives 4x/10x/40x/100x EWF 10x/20 mm wide-field eyepieces Reliable contrast for unstained and delicate specimens The darkfield arrangement delivers significantly improved visibility of transparent or unstained samples by scattering light to reveal edges and fine structures that are otherwise difficult to discern. Combined with E-Plan objectives, which are corrected for flat-field imaging, the instrument produces a uniform image across the field of view; this supports consistent measurements and reduces the need for frequent refocusing. The optical configuration therefore translates into time savings and more reproducible results in teaching labs and routine diagnostics, where repeatability and clarity are critical. Streamlined documentation and imaging workflow A trinocular head enables simultaneous viewing and image capture, making the model particularly suitable for documentation and digital reporting. Wide-field eyepieces (EWF 10x/20 mm) provide a comfortable viewing field for extended sessions, while the plan-corrected objectives maintain sharpness to the periphery—advantages that simplify image acquisition and reduce post-processing. The design supports a practical workflow: observe, capture, and archive with minimal interruption, which is essential for lab teams that balance microscopy with other analytical tasks. Designed for everyday laboratory use and teaching The configuration suits a range of life-science applications where contrast and documentation matter, from specimen preparation assessment to routine morphological checks. The combination of darkfield capability and a comprehensive objective set ensures versatility across sample types. Built for dependable operation, the instrument contributes to a predictable lab routine and supports pedagogic settings where multiple users require consistent optical performance and simple camera integration for demonstrations. Contact Metav Werkzeuge for specialist advice on the iScope IS.1153-EPL/DF and to arrange procurement or application guidance from the Emmerich team Technical data Article number: IS.1153-EPL/DF Brand: Euromex Product type: Biological microscope Model series: iScope Facts Eyepieces: EWF 10x / 20 mm Objectives: E-Plan 4x, 10x, 40x, 100x Special features Trinocular head Darkfield configuration E-Plan objectives Wide-field eyepieces (EWF) FAQ What magnifications are available with this model? The Euromex iScope IS.1153-EPL/DF is supplied with EWF 10x eyepieces and E-Plan objectives at 4x, 10x, 40x and 100x, providing a versatile magnification range for routine laboratory tasks. Is the darkfield configuration suitable for unstained samples? Yes, the darkfield set-up on the iScope IS.1153-EPL/DF enhances contrast for unstained or transparent specimens, making structural details more visible without staining. Can a camera be attached to this microscope? The trinocular head of the iScope IS.1153-EPL/DF permits camera attachment for documentation and teaching; specific camera interfaces and adapters should be selected to match the chosen imaging device. Which objectives come with the instrument? This model is equipped with E-Plan objectives in 4x, 10x, 40x and 100x, optimised for flat-field imaging and reliable peripheral sharpness. For which applications is this microscope best suited? The iScope IS.1153-EPL/DF is aimed at life-science teaching, routine laboratory observation and applications requiring enhanced contrast and image documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.1159-PLPHi Phase Contrast Binocular Köhler LED - Euromex

Take advantage of precise phase-contrast imaging and stable LED illumination combined with user-friendly ergonomics for dependable lab work. Order the instrument directly via Metav Werkzeuge or consult the Metav team for tailored advice. Biological Microscope iScope IS.1159-PLPHi — Binocular phase-contrast system with Köhler LED The iScope IS.1159-PLPHi is a binocular biological microscope designed for phase-contrast observation and documentation in teaching and life-science laboratories. Binocular head with photo tube for imaging Plan phase-contrast objectives 10x–100x EWF 10x/22 mm wide-field eyepieces Köhler LED illumination with iCare sensor Clear phase-contrast imaging for reliable cell observation The optical configuration centres on Plan phase-contrast objectives, which deliver consistent field flatness and superior contrast for transparent specimens. This design reduces image distortion across the field, enabling clearer visualisation of cellular structures during routine analysis. With wide-field eyepieces and corrected plan optics, the instrument supports repeatable observations that benefit both practical teaching and documented laboratory workflows. Consistent illumination and sensor-assisted stability Equipped with Köhler LED illumination, the instrument ensures uniform light distribution and low thermal load at the specimen, which helps maintain sample integrity during extended sessions. The integrated iCare sensor monitors illumination conditions to promote reproducible results and minimise manual readjustment, making long or repeated periods at the bench more efficient and less error-prone. Ergonomic design that improves throughput and documentation A binocular head with a dedicated photo port simplifies the transition from observation to imaging, while EWF 10x/22 mm eyepieces offer comfortable viewing for extended use. The mechanical stage without rack overhang provides unobstructed slide handling and precise specimen positioning, which speeds up routine screening and reduces the risk of sample interference. These aspects combine to reduce handling time and support clearer documentation of findings. Robust feature set with laboratory-ready compatibility The phase-contrast capability, plan-corrected objectives and dedicated imaging port form a cohesive package tailored to education and life-science tasks. The construction supports standard accessory integration and separate accessory assignments where required. Built for regular laboratory use, the configuration balances optical performance with straightforward operation to support both learning environments and practical research benches. For precise phase-contrast imaging and rapid documentation, contact Metav Werkzeuge in Emmerich for expert advice and immediate supply of the Euromex iScope IS.1159-PLPHi — reliable equipment, direct from a trusted precision partner. Technical Data Article number: IS.1159-PLPHi SKU: IS.1159-PLPHi Brand: Euromex Model series: iScope Product type: Biological microscope Core specifications Eyepieces: EWF 10x/22 mm Objectives: Plan-Phasenkontrast IOS 10x, 20x, 40x, 100x Head: Binocular Illumination: Köhler LED Special features Photo attachment (photo port) Phase contrast capability iCare sensor Mechanical stage without rack overhang Accessories assigned separately FAQ What magnification range is available with this microscope? The Euromex iScope IS.1159-PLPHi is supplied with Plan phase-contrast objectives covering 10x, 20x, 40x and 100x, combined with EWF 10x eyepieces for standard magnification steps. Is the microscope suitable for documentation and imaging? Yes, the binocular head includes a photo port so the iScope IS.1159-PLPHi can be readily connected to cameras for image capture and documentation. Does the illumination support long observation sessions? The Köhler LED illumination of the iScope IS.1159-PLPHi provides stable, low-heat illumination suitable for extended use, while the iCare sensor contributes to reproducible light settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.3153-EPLi/6 Trinocular E‑Plan EPLi 4x/10x/S40x/S100x Oil, 100 W HBO NeoLED - Euromex

Combining 100 W HBO excitation with NeoLED illumination and a set of E‑Plan objectives, this trinocular microscope delivers dependable fluorescence contrast and crisp brightfield detail for routine laboratory workflows; order the iScope IS.3153-EPLi/6 directly via Metav Werkzeuge or consult our specialists for accessory matching. Biological Microscope iScope IS.3153-EPLi/6 — Trinocular fluorescence microscope with 100 W HBO and NeoLED (Euromex) Biological Microscope iScope IS.3153-EPLi/6 is a trinocular upright microscope configured for fluorescence applications and routine biological imaging in teaching and diagnostic laboratories Trinocular head for simultaneous observation and imaging E‑Plan objectives 4×/10×/40×/100× oil Dual illumination: 100 W HBO and NeoLED Blue and green fluorescence filter sets High-contrast fluorescence imaging with stable illumination The combination of 100 W HBO excitation and NeoLED illumination provides both the intensity required for fluorescence excitation and the stability needed for repeatable imaging. The high‑energy HBO source enables clear excitation of common fluorophores, while the LED unit offers lower‑heat, long‑term illumination for transmitted light techniques. This mix reduces setup time between fluorescence and brightfield modes and supports consistent image capture during documentation. Optical precision that supports reliable analysis Equipped with E‑Plan objectives in 4×, 10×, 40× and 100× oil, the optical train is designed for flat‑field correction and high resolution across the usable field of view. Plan‑corrected optics minimise edge distortion and produce uniform sharpness, which is especially beneficial when quantifying structures or creating montages. The 100× objective uses immersion oil to achieve the numerical aperture required for fine detail and subcellular observation. Workflow advantages for imaging and documentation The trinocular head allows simultaneous binocular observation and camera attachment, improving throughput in teaching or multi‑operator environments and simplifying image capture for reports. The dedicated camera port maintains optical alignment while the viewing tube supports comfortable posture for extended sessions. Together with the dual illumination system, the optical configuration facilitates fast switching between observation modes and efficient documentation of findings. Suitable for routine lab use and varied applications Supplied with Blue and Green filter sets, this unit is configured for common fluorescence assays and routine histology checks. As an upright biological microscope within the fluorescence category, it is appropriate for educational labs, diagnostic screening and general life science tasks that require both brightfield and epifluorescence capability. Accessories and matching components are available separately to extend functionality for specific applications. For tailored advice on accessories, camera compatibility or to secure supply from Metav Werkzeuge in Emmerich, contact our sales team for a detailed consultation on the iScope IS.3153-EPLi/6 and its lab applications. Technical Data Manufacturer article number: IS.3153-EPLi/6 SKU: IS.3153-EPLi/6 Brand: Euromex Product type: Biological microscope Model series: iScope Core technical data Head: Trinocular Objectives: E‑Plan EPLi 4×, 10×, 40×, 100× oil Illumination: 100 W HBO; NeoLED Filter sets: Blue and Green Special features and equipment Configured for fluorescence and brightfield imaging Trinocular port for camera attachment Plan‑corrected objectives for flat field imaging Suitable for teaching, diagnostics and routine life science work FAQ What illumination sources are included with this microscope? The iScope IS.3153-EPLi/6 includes a 100 W HBO excitation lamp for fluorescence and a NeoLED unit for transmitted light, enabling rapid switching between modes. Which objectives are supplied and what do they offer? The instrument is supplied with E‑Plan objectives at 4×, 10×, 40× and 100× oil, offering plan correction for uniform sharpness and a 100× oil objective for high‑resolution work. Is the microscope ready for image documentation? Yes. The trinocular head supports simultaneous observation and camera connection, allowing the iScope IS.3153-EPLi/6 to be used with a range of cameras for documentation and teaching workflows. Which fluorescence channels are available out of the box? Blue and green fluorescence filter sets are supplied, optimised for common dyes in educational and routine laboratory assays. What applications suit this microscope best? This upright biological fluorescence microscope is well suited to teaching labs, routine diagnostic screening and general life science imaging where both brightfield and fluorescence are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.3153-PLi/3 Trinocular Plan PLi Objectives 4x/10x/40x/100x Oil, HBO & NeoLED Illumination - Euromex

Benefit from the combination of a trinocular head, high‑quality Plan PLi objectives and dual 100 W HBO / NeoLED illumination for versatile fluorescence and transmitted‑light work; order the instrument directly via Metav Werkzeuge or consult our specialists for configuration advice. iScope IS.3153-PLi/3 Biological Microscope — Trinocular head with Plan PLi objectives The iScope IS.3153-PLi/3 is a biological microscope designed for fluorescence and routine life‑science imaging, pairing a trinocular head with Plan PLi optics and dedicated blue and green filter sets. Trinocular head for simultaneous viewing and imaging Plan PLi objectives 4x, 10x, S40x and S100x oil Blue and green fluorescence filter sets Dual illumination: 100 W HBO and NeoLED High‑precision optics for clear, reproducible images The optical layout centres on Plan PLi objectives, which deliver a corrected, flat field across the image plane; this minimises edge distortion and supports accurate observation and documentation. The combination of 4x, 10x, S40x and S100x oil objectives covers the common magnification range for cell and tissue work while preserving contrast and detail. A trinocular head enables a direct optical path for a camera, so documentation and live viewing can proceed in parallel. The built‑in diopter adjustment on both eyepieces ensures comfortable binocular viewing and rapid visual matching between operators, reducing setup time and intra‑user variability. Stable excitation and flexible illumination for fluorescence applications Illumination is a decisive factor for fluorescence microscopy: the system combines a 100 W HBO excitation source with a NeoLED option, offering both strong excitation and longer‑lived LED lighting for less heat and lower lamp change frequency. Paired with blue and green filter sets, this arrangement enables selective excitation for common fluorophores and straightforward contrast control in epi‑fluorescence workflows. The dual‑light approach provides practical flexibility: high‑intensity illumination for demanding fluorescence captures and LED illumination for routine inspection or extended sessions where thermal load and stability matter. Built for laboratory workflow and dependable service life Specified as a biological microscope within the iScope series, the instrument is engineered for daily laboratory use and easy integration into imaging setups. The trinocular configuration simplifies camera mounting without compromise to ergonomic binocular viewing, while Plan optics assist quantitative tasks by delivering consistent image geometry. For laboratories seeking reliable supply and technical partnership, Metav combines wide availability with specialist advice and a comprehensive product range, acting as a quality filter for European procurement. If further technical details or configuration guidance are required, Metav’s consultants can advise on matching cameras, eyepieces or additional filter options to specific applications. For tailored configuration advice or to secure supply of the Euromex iScope IS.3153-PLi/3, contact Metav Werkzeuge for expert guidance from Emmerich and dependable delivery to the lab bench. Technical Data Article number: IS.3153-PLi/3 SKU: IS.3153-PLi/3 Manufacturer: Euromex Product type: Biological microscope Facts Objectives: 4x, 10x, S40x, S100x oil Illumination: 100 W HBO; NeoLED Head: Trinocular Special features Plan PLi objectives Blue and green fluorescence filter sets Diopter adjustment on both sides Model series: iScope Category: Fluorescence microscopes FAQ Is this microscope suitable for fluorescence imaging? Yes. The Euromex iScope IS.3153-PLi/3 is equipped with 100 W HBO excitation and NeoLED options together with blue and green filter sets, enabling routine fluorescence observation and documentation. Can a camera be fitted to the microscope for image capture? Yes. The trinocular head supports camera attachment while maintaining binocular viewing, so the iScope IS.3153-PLi/3 can be used for live observation and simultaneous image acquisition. What objective magnifications are supplied with the system? The instrument includes Plan PLi objectives at 4x, 10x, S40x and S100x oil, covering typical magnification needs for cell biology and histology work. Does the microscope support comfortable binocular use for different operators? Yes. The system features diopter adjustment on both eyepieces to accommodate individual eyesight differences and speed up operator handover. Which illumination options improve versatility for lab workflows? Dual illumination—100 W HBO for strong excitation and NeoLED for stable, lower‑heat lighting—gives users flexibility for demanding fluorescence captures and longer observation sessions. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope iScope IS.3153-PLi/6 Trinocular Plan PLi Objectives 100 W HBO NeoLED - Euromex

Take advantage of the combination of fluorescence-capable illumination, high-quality Plan PLi objectives and a trinocular head for reliable imaging and straightforward documentation; these features support reproducible results and efficient workflow. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration and application advice. Biological microscope iScope IS.3153-PLi/6 — trinocular lab instrument with fluorescence illumination Biological microscope iScope IS.3153-PLi/6 is a laboratory-grade upright microscope designed for routine fluorescence and brightfield work in research, teaching and diagnostic settings. Trinocular head for camera attachment Plan PLi objectives to 100x oil Dual illumination: 100 W HBO and NeoLED Blue and green filter sets for fluorescence Consistent fluorescence results with robust optics The instrument is configured for fluorescence microscopy with dedicated blue and green filter sets and a powerful 100 W HBO lamp, which together deliver bright, selective excitation for common fluorophores. The inclusion of Plan PLi objectives ensures flat-field imaging and corrected optics across the field of view, reducing the need for frequent refocusing and making measurement and documentation more efficient. This combination supports repeatable signal capture and lowers the risk of data variability in routine lab workflows. Flexible illumination for contrast and longevity Dual illumination provides both a traditional mercury/arc-style excitation and a modern LED source: 100 W HBO for intense fluorescence excitation and NeoLED for energy-efficient brightfield observation and extended sample inspection. The LED option reduces heat-load and light-induced photobleaching during prolonged visual inspection, while the HBO source offers the intensity required for weakly fluorescent samples. The instrument’s illumination choices translate into operational flexibility and extended sample throughput without sacrificing image quality. Ergonomic documentation and reliable handling A trinocular head supports camera integration for image capture and live documentation, enabling simple transition from observation to digital recording. The head features dioptre adjustment on both sides, allowing multiple users to achieve comfortable focus without altering the main optical alignment. Built for frequent laboratory use, the design balances stable mechanical performance with accessible controls, which helps maintain uptime and facilitates staff training on microscopy techniques. The result is a dependable workstation that accelerates routine analysis and record-keeping. For tailored advice on camera options, filter sets or availability, contact Metav Werkzeuge in Emmerich by e‑mail or phone; our consultants will assist with specifications and order processing Technical data SKU: IS.3153-PLi/6 Manufacturer: Euromex Model series: iScope Product type: Biological microscope 4x, 10x, 40x, 100x magnifications Illumination: 100 W HBO; NeoLED Trinocular head Plan PLi objectives (4x / 10x / S40x / S100x oil) Blue and green filter sets Dioptre adjustment on both sides Fluorescence-capable FAQ Is this microscope suitable for fluorescence applications? Yes. The iScope IS.3153-PLi/6 from Euromex is configured with blue and green filter sets and a 100 W HBO illumination source for common fluorescence workflows. Can a camera be attached to document results? Yes. The trinocular head allows camera attachment for image capture and documentation when using the iScope IS.3153-PLi/6. Does the instrument include oil-immersion optics? Yes. The configuration includes a Plan PLi 100x oil objective suitable for high-magnification, oil-immersion imaging with the Euromex biological microscope. What are the illumination options for brightfield and fluorescence? The instrument combines a 100 W HBO excitation source for fluorescence with a NeoLED option for energy-efficient brightfield observation in the iScope IS.3153-PLi/6. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Biological Microscope MicroBlue MB.1652 Binocular 4x/10x/S40x, S60x Additional Objective, Dual Color NeoLED - Euromex

Take advantage of the combination of precise optics, versatile illumination and a mechanical X–Y stage for dependable classroom and laboratory workflows; order the MicroBlue MB.1652 directly via Metav Werkzeuge or ask our consultants for tailored advice. MicroBlue MB.1652 biological microscope — Euromex, binocular head & Dual Colour NeoLED The MicroBlue MB.1652 is a binocular biological microscope designed for teaching and routine laboratory observation, equipped with multi‑power objectives and a mechanical X–Y stage for controlled specimen handling. Binocular head for comfortable viewing Objectives 4×, 10× and 40×; extra 60× accessory Mechanical X–Y stage for precise specimen positioning Dual Colour NeoLED illumination with battery option Clear optical performance for reliable observation The instrument combines a binocular viewing head with a set of objectives (4×, 10× and 40×) plus a supplementary 60× lens, delivering a versatile range for brightfield microscopy. This configuration supports both demonstration and individual examination by enabling stepwise increases in detail. The optical layout reduces eye fatigue during extended sessions, while the selectable objective set permits quick adaptation between overview and fine detail, improving throughput in teaching and diagnostic tasks. Precise specimen handling to speed up workflows A mechanical X–Y stage facilitates controlled lateral movement of slides, which is particularly helpful for systematic scanning and repeatable positioning of regions of interest. The stage enables accurate alignment and reduces repositioning time, which supports efficient routines in education and quality control. For users unfamiliar with stage operation, the mechanical control offers an intuitive way to gain reproducible results without complex adjustments. Flexible illumination and portable use for varied environments The Dual Colour NeoLED system provides adjustable colour balance to enhance contrast across different sample types, from stained preparations to unstained wet mounts. Battery operation expands the unit’s usability to mobile teaching scenarios or locations where mains power is intermittent. Together, these features ensure consistent sample illumination and foster confidence in everyday observations while preserving specimen detail. For dependable classroom and laboratory performance, contact Metav Werkzeuge in Emmerich for a technical consultation on the MicroBlue MB.1652 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and available accessories Technical Data Article number: MB.1652 SKU: MB.1652 Manufacturer: Euromex Model series: MicroBlue Product type: Biological microscope Facts Objectives: 4×, 10×, 40×; supplementary 60× Head: Binocular Stage: Mechanical X–Y stage Illumination: Dual Colour NeoLED Power: Battery operation Special features Category: Brightfield microscopes Accessories mapping: see separate accessory fields Intended use: teaching and routine laboratory observation FAQ What magnification steps are available with this microscope? The MicroBlue MB.1652 is supplied with 4×, 10× and 40× objectives and an additional 60× accessory, allowing smooth progression from overview to higher detail levels. Is the illumination adjustable for different sample contrasts? Yes, the Dual Colour NeoLED lighting of the MicroBlue MB.1652 permits adjustment of colour balance to enhance contrast for a variety of sample types. Can the microscope be used away from mains power? Battery operation is supported, enabling the instrument to be used in classroom demonstrations and locations without immediate mains access. How does the mechanical X–Y stage benefit routine work? The mechanical X–Y stage enables precise and reproducible slide positioning, which speeds up scanning and repeat measurements in teaching and quality control environments. Which category does this microscope belong to and what is it best suited for? Classified as a brightfield biological microscope, the MicroBlue MB.1652 is best suited for educational laboratories and routine sample observation where robust, easy‑to‑use optics are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

BS.1152-PLPHi Biological Microscope 10x/20x/40x/100x Plan Phase Contrast Objectives, Köhler NeoLED - Euromex

Benefit from a microscope that combines Plan phase-contrast objectives, stable Köhler NeoLED illumination and an ergonomic binocular head to speed up sample evaluation and reduce user fatigue. Order directly via Metav Werkzeuge or consult the team if additional details are required. bScope BS.1152-PLPHi — Biological microscope with Plan phase-contrast optics and Köhler NeoLED (Euromex) bScope BS.1152-PLPHi is a biological microscope designed for phase-contrast imaging in routine laboratory work and teaching, offering oil-immersion capability and an ergonomic head for extended use. Plan phase-contrast objectives for high-contrast imaging Köhler NeoLED illumination with stable light output Five-position nosepiece for versatile magnification Ergonomic head with two swivel positions for comfort Precision phase-contrast optics for clearer cellular detail The optical layout centres on Plan phase-contrast objectives (IOS 10x / 20x / S40x / S100x oil) combined with HWF eyepieces, which produce a flat field and consistent contrast across the image. This optical combination reduces artefacts and improves the visibility of transparent specimens, making routine observations and documentation more reliable. The inclusion of an oil-immersion 100x objective ensures that fine structural detail is resolvable when needed, while the optical design maintains colour fidelity and even illumination for reproducible results. Stable illumination and ergonomic handling to improve throughput Illumination is provided by Köhler NeoLED, a low-heat light source that delivers uniform, flicker-free light and reduces maintenance intervals compared with conventional lamps. The instrument’s ergonomic head with two swivel positions and a binocular head layout supports comfortable viewing angles during long sessions, lowering operator fatigue and improving consistency between users. A five-position nosepiece enables fast changes between magnifications, cutting downtime in multi-step routines and increasing sample throughput in teaching and diagnostic environments. Built for routine labs and adaptable workflows The instrument is engineered for everyday laboratory use with robust mechanics and straightforward operation. The fivefold revolver and the selection of HWF 10x/20 mm eyepieces support common workflows in cell biology, microbiology and histology. Accessory allocation is documented separately to simplify configuration for specific tasks. For laboratories seeking a balance between performance and ease of use, this model offers proven phase-contrast capability without unnecessary complexity. If additional technical specifications or compatibility information is required, the Metav team can supply the relevant data and advice via the contact details below. Contact Metav Werkzeuge to discuss how the bScope BS.1152-PLPHi with Köhler NeoLED can be configured for specific laboratory tasks and to request tailored technical guidance from the Metav specialists Technical Data Article number: BS.1152-PLPHi SKU: BS.1152-PLPHi Product type: Biological microscope Model series: bScope Brand: Euromex Core specifications Eyepieces: HWF 10x / 20 mm Objectives: Plan phase-contrast IOS 10x / 20x / S40x / S100x oil Nosepiece: Five-position (fivefold revolver) Head: Binocular with two swivel positions Illumination: Köhler NeoLED Special features Plan phase-contrast optics Ergonomic head with two swivel positions Oil-immersion 100x objective for high-resolution work Accessory assignment: see matching accessories field FAQ What magnifications are covered by the supplied objectives? The objectives supplied cover the common laboratory range with Plan phase-contrast IOS 10x, 20x, S40x and S100x oil, enabling low- to high-magnification examinations and oil-immersion observation with the Euromex BS.1152-PLPHi. Is the illumination suitable for long sessions and photographic documentation? Yes, the Köhler NeoLED illumination provides stable, uniform light with minimal heat output, which is well suited to extended use and consistent image capture on the bScope BS.1152-PLPHi. Does the microscope support comfortable multi-user use in teaching environments? The binocular head with two swivel positions and the ergonomic design reduce neck and eye strain, supporting repeated use across different operators in teaching and routine lab settings. Can the BS.1152-PLPHi be adapted with additional accessories? Accessory allocation is available in the separate accessories field; the instrument’s five-position nosepiece and standard eyepiece format make it compatible with common accessories for phase-contrast microscopy. Is an oil-immersion lens included and when should it be used? An S100x oil objective is included for high-resolution observations; oil immersion should be used when resolving fine structural detail at high numerical aperture is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

BS.1153-PLPHi Biological Microscope 10x/20x/40x/100x Oil Plan Phase Contrast, Köhler NeoLED - Euromex

Benefit from Plan phase-contrast objectives and a Köhler NeoLED illumination system for consistent contrast and low-maintenance operation. Order the bScope BS.1153-PLPHi biological microscope directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.1153-PLPHi biological microscope — Trinocular phase-contrast instrument with Köhler NeoLED bScope BS.1153-PLPHi is a trinocular upright biological microscope optimised for phase-contrast applications in life science laboratories and teaching environments Trinocular head for camera attachment Plan phase-contrast objectives up to 100x oil Köhler NeoLED illumination for stable lighting Ergonomic head with two swivel positions Precision optics for clear phase-contrast imaging The instrument is equipped with Plan phase-contrast objectives (10x, 20x, S40x, S100x oil) that deliver flat-field images with reduced spherical aberration, enabling reliable observation of unstained, transparent specimens. The long working distance and plan correction mean the optical field remains sharp across the view; this is particularly useful when documenting delicate cells or microstructures. The combination of high-quality objectives and an HWF 10x / 20 mm eyepiece provides a well-defined image circle for routine analysis and teaching demonstrations. Stable illumination for reproducible results Illumination is provided by Köhler NeoLED, a modern LED system offering homogeneous light, low heat generation and long service life. Köhler illumination aligns condenser and field diaphragms to maximise contrast and uniformity, which is essential for phase-contrast techniques. The low-maintenance LED source reduces downtime and avoids the colour-shift issues associated with ageing bulbs, supporting consistent imaging across multiple sessions and operators. Ergonomic design to reduce fatigue and speed workflows An ergonomic trinocular head with two swivel positions improves user comfort and laboratory throughput: one position allows traditional binocular viewing; the other is optimised for camera attachment or alternate observation angles. The five-position turret facilitates rapid objective changes without loss of focus, saving time during multi-magnification workflows. These design choices translate into fewer interruptions, reduced neck and shoulder strain during extended use, and a measurable increase in daily sample throughput. Practical suitability and purchasing assurance Built as part of the bScope series, this upright biological microscope combines phase-contrast capability with a trinocular port for digital documentation, making it suitable for teaching, routine laboratory analysis and clinical observation. Accessories and compatible camera mounts are available separately according to laboratory needs. For further technical clarification or assistance selecting the right configuration for a specific application, Metav Werkzeuge provides direct advisory support from Emmerich to ensure the instrument meets operational requirements. For expert advice or to arrange fast delivery from Emmerich, contact Metav Werkzeuge about the Euromex bScope BS.1153-PLPHi — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and procurement support. Technical data Article number: BS.1153-PLPHi Brand: Euromex Model series: bScope Product type: Biological microscope Category: Phase-contrast microscopes (upright) Facts Eyepieces: HWF 10x / 20 mm Objectives: Plan phase-contrast IOS 10x, 20x, S40x, S100x oil Revolver: Five-position turret Head: Trinocular ergonomic head with two swivel positions Illumination: Köhler NeoLED Special features Trinocular port for camera attachment Plan-corrected phase-contrast optics Oil-immersion option for highest magnification Ergonomic head to switch between viewing positions FAQ What magnification range is available with this instrument? The Euromex bScope BS.1153-PLPHi supports eyepieces HWF 10x and Plan phase-contrast objectives 10x, 20x, S40x and S100x oil, providing suitable magnifications for routine cell observation and detailed structural work. Can a camera be attached for documentation? Yes. The trinocular head permits camera attachment so images can be recorded; camera adapters compatible with the trinocular port are available separately. Is the illumination suitable for long-term cell observation? Köhler NeoLED provides stable, low-heat illumination that is well suited to prolonged observation and time-lapse documentation without warming the specimen. Does the instrument support phase-contrast without staining? Phase-contrast optics on this model are designed specifically for visualising unstained, transparent samples, making staining unnecessary for many live-cell and thin-sample applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

BS.4053-PLMRi 5 W NeoLED Auflicht Materialmikroskop Trinokular 30° 360° drehbar, IOS-Planobjektive 5x/10x/20x/50x - Euromex

bScope für große Proben BS.4053-PLMRi Materialmikroskop bScope für große Proben BS.4053-PLMRi bietet hochpräzise Optik und stabile Mechanik für die Analyse von großen Proben in Labor, Prüffeld und Fertigung bScope BS.4053-PLMRi Materialmikroskop von Euromex IOS‑Planobjektive 5x 10x 20x 50x Großer Objekttisch 185 x 140 mm Verfahrweg 35 x 30 mm Trinokularkopf 30° 360° drehbar für Fotoaufnahmen Integriertes 5 W NeoLED Auflicht Fotoadapter inklusive Präzision und Optik für große Proben Das Mikroskop ist auf verlässliche Bildgebung ausgelegt: IOS‑Planobjektive (5x, 10x, 20x, 50x) liefern korrigierte, flache Bildfelder und reduzieren Bildverzerrungen bei großen Proben, sodass Messungen und visuelle Prüfungen konsistent bleiben. Die mitgelieferten EWF‑Okulare 10x/22 mm sorgen für ein weites Sichtfeld, optimale Ergonomie und ermöglichen komfortables Arbeiten über längere Zeiträume. Das integrierte 5 W NeoLED-Auflicht bietet gleichmäßige, langlebige Beleuchtung ohne starke Wärmeentwicklung, was empfindliche Proben schont. Der mitgelieferte Fotoadapter BS.5120 erlaubt direkte Dokumentation für Prüfberichte und Archivierung. Ergonomie, Mechanik und Feinjustage Für präzise Positionierung großer Prüfkörper bietet der Objekttisch 185 x 140 mm einen Verfahrweg von 35 x 30 mm und erlaubt gleichmäßiges Verschieben auch schwerer Proben. Die Fokussierung arbeitet mit einer Auflösung von 1,3 µm und einer Verfahrstrecke von 20 mm; pro Umdrehung werden 130 µm umgesetzt, was feinste Schärfeeinstellungen ermöglicht. Der Trinokularkopf ist um 360° drehbar und um 30° geneigt, wodurch sowohl visuelles Arbeiten als auch die Anbindung von Kameraequipment ergonomisch möglich sind. Der vergrößerte Säulenstand und die Basis 300 x 250 mm sorgen für Stabilität und vibrationsarmen Betrieb. Einsatzbereiche, Zielgruppe und Varianten Das System richtet sich an Prüflabore, Materialprüfung, Forschungseinrichtungen und Fertigungsbereiche, die robuste Lösungen für große Bauteile benötigen. Typische Anwendungen sind Oberflächeninspektion, Fehlstellenanalyse, Messaufgaben und dokumentationspflichtige Prüfprozesse. Die Ausstattung mit Planobjektiven macht das Gerät besonders geeignet für Anwender, die reproduzierbare, messtaugliche Aufnahmen benötigen. Ein 100x‑Objektiv ist optional erhältlich und erweitert den Anwendungsbereich Richtung hochaufgelöster Detailanalysen. Nutzen Sie die Kombination aus präziser Optik, stabiler Mechanik und einfacher Fotointegration und bestellen Sie das bScope für große Proben über Metav Werkzeuge – bei Fragen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: BS.4053-PLMRi Marke: Euromex Serie: bScope für große Proben Produkttyp: Materialmikroskop Lieferumfang: Fotoadapter BS.5120; Staubschutz; Anleitung Mikroskopkopf: Trinokular, 30°, 360° drehbar Objektivsystem: IOS-Planobjektive 5x / 10x / 20x / 50x Okulare: EWF 10x/22 mm, Steckdurchmesser 30 mm, 100x optional Beleuchtung: 5 W NeoLED-Auflicht Objekttisch: 185 x 140 mm; Verfahrweg 35 x 30 mm Fakten Objektivvergrößerungen: 5x / 10x / 20x / 50x Okularvergrößerung: 10x (EWF 10x/22 mm) Verfahrweg Objekttisch: 35 x 30 mm Tischgröße: 185 x 140 mm Fokussierung: 1,3 µm Auflösung Schritthub pro Umdrehung: 130 µm Fokus Verfahrweg: 20 mm Basismaß: 300 x 250 mm Säulenhöhe (BS.9047): 28 cm Pupillenabstand: 48–76 mm Beleuchtung Leistung: 5 W Besonderheiten Trinokularkopf: Fotoanschluss möglich EWF Okulare: Weitfeldokulare für größere Sichtfläche IOS Planobjektive: Korrigierte Planobjektive für flaches Bildfeld Fotoadapter BS.5120: Direkte Kameraintegration Staubschutz: Schutzhaube inklusive 100x Objektiv: Optional erhältlich, erweitert Vergrößerungsbereich FAQ Welche Vergrößerungsbereiche bietet das Mikroskop? Das Gerät ist mit IOS‑Planobjektiven in 5x, 10x, 20x und 50x ausgestattet; in Kombination mit den EWF‑Okularen ergeben sich praxisgerechte Vergrößerungen für Materialprüfung und Oberflächenanalysen. Ein 100x‑Objektiv ist optional verfügbar. Ist die Kameraintegration im Lieferumfang enthalten? Ein Fotoadapter BS.5120 ist im Lieferumfang enthalten; für die Nutzung von Sensoren oder spezifischen Kameragrößen sind die passenden Fotoanschlüsse und Sensorgrößen wie in den Zubehörbedingungen angegeben. Wie groß dürfen die Proben maximal sein? Der Objekttisch 185 x 140 mm mit Verfahrweg 35 x 30 mm erlaubt das komfortable Positionieren großer Prüfkörper; schwerere Bauteile profitieren von der stabilen Basis 300 x 250 mm. Wie fein ist die Fokussierung einstellbar? Die Fokussierung arbeitet mit einer Auflösung von 1,3 µm und einem Hub von 20 mm; das ergibt präzise Schärfeeinstellungen, die für messtaugliche Dokumentation in Prüfabläufen ausreichen. Welche Beleuchtungsart wird verwendet? Es kommt ein 5 W NeoLED-Auflicht zum Einsatz, das gleichmäßige, langlebige Beleuchtung ohne nennenswerte Wärmeentwicklung liefert und so bei temperaturempfindlichen Proben Vorteile bietet. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

DX.1153-PLPHi Biological Microscope Delphi-X Observer Phase Contrast Objectives 10x/20x/40x/100x Oil 3 W NeoLED Köhler - Euromex

Take advantage of Plan phase-contrast optics and Köhler NeoLED illumination for consistent contrast and low-heat operation in routine laboratory workflows. The combination of a sixfold objective turret and SWF 10x eyepieces ensures rapid magnification changes and comfortable observation. Order this configuration through Metav Werkzeuge or consult our specialists for configuration and accessory options. Delphi-X Observer DX.1153-PLPHi — Biological microscope with Plan phase-contrast objectives and 3 W NeoLED Köhler Delphi-X Observer DX.1153-PLPHi is an upright biological microscope designed for phase-contrast examinations in research, teaching and diagnostic laboratories, optimising contrast for transparent specimens. SWF 10x/25 mm eyepieces Six-position objective turret Plan phase-contrast objectives incl 100x oil 3 W NeoLED Köhler illumination Optimised imaging for phase-contrast work The instrument’s combination of Plan phase-contrast objectives and SWF eyepieces provides sharp, flat-field images with improved detail across the field of view. Phase contrast converts minute optical-density variations into visible contrast, making unstained cells and thin sections easier to evaluate. The set of 10x, 20x, 40x and 100x oil immersion objectives covers common laboratory magnifications and helps to reduce the need for multiple microscopes. Optical flatness and corrected aberrations in the Plan optics minimise edge distortions, which benefits quantitative observations and image documentation. Even, low-heat illumination for stable long-term observation The 3 W NeoLED Köhler illumination ensures homogeneous field lighting and stable colour temperature while producing minimal heat at the specimen plane, which protects live samples and delicate preparations. Köhler alignment provides uniform illumination and contrast control, improving reproducibility between sessions. The six-position objective turret enables quick, reliable objective changes without losing focus, supporting efficient workflows during practical classes or multi-specimen analyses. The SWF 10x/25 mm eyepieces contribute to a comfortable exit pupil and straightforward focusing. Practical build and accessory compatibility for lab workflows Robust mechanical design and the sixfold turret provide durability for frequent use in teaching and clinical environments. An oil immersion 100x objective is included for high-resolution requirements; proper oil technique yields finer detail at high numerical apertures. Accessories are referenced separately on the accessory sheet for tailored configurations such as camera adapters or replacement eyepieces, allowing modular expansion without replacing the base instrument. The package supports repeatable imaging and can be integrated into established laboratory routines with minimal training. Discuss the Delphi-X Observer’s phase-contrast configuration with Metav Werkzeuge in Emmerich for tailored advice and accessory recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DX.1153-PLPHi SKU: DX.1153-PLPHi Manufacturer: Euromex Product type: Biological microscope Model series: Delphi-X Observer Label: Biologisches Mikroskop Delphi-X Observer DX.1153-PLPHi Performance figures Eyepieces: SWF 10x / 25 mm Objectives: Plan phase-contrast EIS 10x, 20x, S40x, S100x oil Illumination: 3 W NeoLED Köhler Revolver: Sixfold / six-position turret Special features Plan phase-contrast optics Oil immersion 100x objective SWF wide-field eyepieces Köhler NeoLED illumination for even field lighting Six-position objective turret for swift magnification changes Category path: microscopes → upright microscopes → phase-contrast microscopes Source: Life Science PDF, p. 25 Accessory reference: see accessory sheet FAQ What magnifications are available with this microscope? The Delphi-X Observer DX.1153-PLPHi is supplied with Plan phase-contrast objectives at 10x, 20x, 40x and a 100x oil immersion option for high-resolution work. Is the illumination suitable for live-cell observation? Yes, the 3 W NeoLED Köhler illumination on the Delphi-X Observer provides low-heat, stable lighting appropriate for many live specimens and long observation periods. Does the microscope support phase-contrast without additional components? Phase contrast is implemented via the Plan phase-contrast EIS objectives included with the Delphi-X Observer DX.1153-PLPHi; a matching condenser or phase ring alignment may be required according to the accessory sheet. Are camera adapters available for image documentation? Camera adapters and other accessory options are listed on the separate accessory sheet for the Delphi-X Observer and can be selected to suit documentation needs. What type of eyepieces are fitted and what is their field of view? The instrument is equipped with SWF 10x/25 mm eyepieces, providing a comfortable field of view suited to routine inspection and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

IS.1053-PLMi

iScope IS.1152-EPL Biological Microscope Binocular E-Plan Objectives, Mechanical X-Y Stage - Euromex

Taking advantage of a binocular head, E‑Plan objectives and a mechanical X‑Y stage ensures reliable bright‑field imaging and precise sample handling; order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. Biological Microscope iScope IS.1152-EPL — Binocular head with E‑Plan objectives and mechanical X‑Y stage (Euromex) The Biological Microscope iScope IS.1152-EPL is an upright bright‑field instrument with wide‑field eyepieces and an integrated X‑Y stage, designed for teaching, routine laboratory inspection and life‑science applications Binocular head for comfortable observation EWF 10x/20 mm wide-field eyepieces E‑Plan objectives for flat field imaging Mechanical X‑Y stage for precise positioning Integrated iCare sensor for operational monitoring Consistent, flat‑field imaging for dependable results High‑quality optics are the foundation of reproducible microscopy. The instrument combines E‑Plan objectives, engineered to deliver a corrected, flat image across the field, with EWF 10x/20 mm eyepieces that expand the usable field of view. This optical pairing reduces edge distortion and improves the clarity of cellular structures in bright‑field observation. For laboratories that require clear documentation of routine samples, the flat‑field correction supports consistent photomicrography and simpler comparison between preparations. The optical design minimises the need for repeated refocusing, which saves operator time and reduces handling‑related artefacts. Precise sample control that speeds up workflow A mechanical X‑Y stage allows accurate, repeatable movement of slides for systematic inspection and measurement tasks. The stage's fine adjustment enables methodical scanning of large specimens and fast relocation of regions of interest, which is particularly useful for sample mapping and classroom demonstrations. Combined with the binocular configuration, the arrangement supports steady, ergonomic observation during longer sessions. The mechanical controls are robust and straightforward, enabling technicians and students to concentrate on the specimen rather than on fiddly positioning, thereby improving throughput and reducing training time. Practical monitoring and straightforward integration into labs An integrated iCare sensor adds an extra layer of operational awareness by providing measurable feedback during use; the exact parameters displayed depend on system configuration. The binocular head offers comfortable stereoscopic alignment of both eyes for extended use, while the upright layout is compatible with standard slide handling and staining workflows found in educational and clinical settings. The instrument is categorised as a bright‑field microscope, making it suitable for routine observation of stained sections, cell cultures and prepared slides. For workshops or small laboratories seeking a dependable upright microscope with quality optics and precise sample control, this configuration balances usability with technical performance. Contact Metav Werkzeuge today to discuss application fit and request a tailored quotation for the Euromex iScope IS.1152-EPL — Metav Werkzeuge can advise on accessories and delivery from Emmerich to your workbench Technical data Article number: IS.1152-EPL SKU: IS.1152-EPL Manufacturer: Euromex Model series: iScope Product type: Biological microscope Facts Eyepieces: EWF 10x/20 mm Head: Binocular Objectives: E‑Plan Special features Mechanical X‑Y stage iCare sensor Classified under bright‑field microscopes (Hellfeldmikroskope) Suitable for teaching and routine laboratory inspection FAQ What magnifications can be achieved with this microscope? The instrument uses EWF 10x/20 mm eyepieces together with E‑Plan objectives, so usable magnifications depend on the objective set fitted; common laboratory objective combinations provide standard low to high power magnification levels for routine bright‑field work with the iScope IS.1152-EPL. Is the iScope IS.1152-EPL suitable for educational use? Yes, the Euromex iScope IS.1152-EPL is designed for teaching and routine laboratory tasks, offering a binocular head and a mechanical X‑Y stage that support repeated demonstrations and systematic slide scanning. What are the benefits of E‑Plan objectives on this model? E‑Plan objectives on the iScope IS.1152-EPL deliver a flattened image field and improved edge sharpness compared with non‑plan optics, making it easier to compare areas across a slide and to capture consistent images. Does the microscope include any monitoring features? The iScope IS.1152-EPL includes an iCare sensor, which provides operational monitoring; the sensor contributes to controlled and documented instrument usage depending on system configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Mikroskop Achios-X Observer AX.1152-PLi Digital Module Compatible - Euromex

Take advantage of a modular upright brightfield microscope that serves as a stable base unit with straightforward upgrade paths; the combination of modularity and clear documentation capability supports efficient lab workflows and future-proof imaging. Order this instrument directly via Metav Werkzeuge or consult their specialists for compatibility and delivery. Achios-X Observer AX.1152-PLi — Euromex upright brightfield microscope, modular digital-ready The Achios-X Observer AX.1152-PLi is a compact upright brightfield microscope designed as a base unit for laboratory, teaching and routine inspection tasks where later digital integration is required Euromex Achios-X upright brightfield design Base unit suitable for digital add-on Compatible with AX.DIGI-ADD digital module Article number AX.1152-PLi for reference Flexible base unit for scalable imaging The Achios‑X Observer AX.1152‑PLi is offered as a dedicated base unit that prioritises adaptability. As a brightfield upright instrument, it provides a conventional optical path for transmitted-light observation while allowing later expansion with a dedicated imaging module. This modular approach reduces initial investment while enabling documentation and digital analysis when required. The clear separation between optical base and imaging module simplifies maintenance and keeps the initial system compact. How modular imaging improves workflow and documentation Fitting a separate digital module such as AX.DIGI‑ADD converts the optical observation chain into a documented workflow without replacing the entire instrument. For laboratories and teaching facilities that require occasional image capture or want to upgrade incrementally, the modular concept minimises downtime and preserves existing laboratory procedures. The modular upgrade supports traceable records and visual reporting, making the system suitable for routine inspection and educational demonstrations where images are required after observation. Practical compatibility and procurement assurance Specification and compatibility are straightforward: the unit is listed as model series Achios‑X Observer with article number AX.1152‑PLi, and the documented accessory combination with AX.DIGI‑ADD is indicated in the product literature. For buyers seeking supply reliability and a predictable acquisition process, Metav Werkzeuge acts as a central partner, offering product availability and procurement support from Emmerich. This procurement route reduces complexity and supports continuity in workshop and laboratory supply chains. For technical confirmation, ordering and assured delivery of the Euromex Achios‑X Observer AX.1152‑PLi, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for expert consultation and secure dispatch from Emmerich. Technical data Article number: AX.1152-PLi SKU: AX.1152-PLi Product type: microscope Facts No measurable specifications provided Special features Model series: Achios-X Observer Base unit for digital module AX.DIGI-ADD Type: Upright brightfield microscope Manufacturer: Euromex FAQ What does the Achios‑X Observer AX.1152‑PLi include as standard? The Achios‑X Observer AX.1152‑PLi is offered as the optical base unit; the product documentation lists it as the base for an optional digital add‑on, with the imaging module supplied separately under AX.DIGI‑ADD. Is a digital camera included with this instrument? No, the digital camera module is not included; the AX.DIGI‑ADD digital module is available separately and is shown as the compatible add‑on in the product literature. Can the base unit be used for teaching and routine inspection? Yes, the upright brightfield configuration of the base unit is suitable for teaching demonstrations and routine inspection workflows where transmitted‑light observation is required. How is the AX.DIGI‑ADD intended to be used with the base unit? The AX.DIGI‑ADD module attaches as an imaging upgrade to convert the optical observation into a documented image stream, enabling capture and archiving while preserving the original optical setup. Where can one find the article number for ordering or reference? The article number for reference is AX.1152‑PLi, listed in the technical literature and relevant for procurement and spare‑part enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Trinocular Biological Microscope 4x/10x/S40x/S100x Oil Objectives NeoLED Illumination - Euromex

Take advantage of precision optics and modern LED illumination for reliable imaging in teaching and laboratory settings; the trinocular head, E‑Plan objectives and NeoLED light source combine to deliver clear, contrast-rich results. Order the instrument directly via Metav Werkzeuge or consult the technical team for tailored advice. bScope BS.1153-EPL — biological microscope with trinocular head and E‑Plan objectives (Euromex) The bScope BS.1153-EPL is a trinocular biological microscope engineered for brightfield observation in education and life‑science laboratories, offering E‑Plan corrected optics and modern NeoLED illumination for consistent results. Trinocular head for parallel observation HWF 10x / 20 mm eyepieces for a wide field of view E‑Plan objectives 4x, 10x, 40x, 100x oil NeoLED illumination for stable light output Purpose‑built optics for dependable results The instrument uses E‑Plan objectives, which are engineered to provide a corrected field across the visual plane; this reduces edge distortion and improves accuracy when assessing specimens. Combined with HWF 10x / 20 mm eyepieces, the optical system delivers a broad, comfortable viewing field that supports extended observation periods. Such features are particularly valuable in instructional environments and routine laboratory work, where reliable image quality reduces interpretation errors and accelerates workflow. Efficient illumination and observation workflow A modern NeoLED light source provides steady, cool illumination with minimal heat transfer to samples, helping to preserve delicate preparations during extended sessions. The four‑position nosepiece enables rapid change between 4x, 10x, 40x and 100x oil immersion objectives, supporting a wide range of magnifications from low overview to high‑resolution detail. The trinocular configuration facilitates simultaneous visual inspection and photodocumentation, allowing an upright optical path for a camera or imaging module without interrupting routine observation. Designed for teaching and laboratory practicality The optical configuration and mechanical layout are suited to both classroom demonstrations and laboratory analysis: the wide eyepiece field improves group viewing and reduces eye strain, while the corrected objective set supports reproducible, high‑contrast imaging. This balance of usability and optical performance makes the instrument a fit for curricula in biology and for basic research tasks where cost‑effective, dependable tools are required. The instrument’s features encourage consistent results across multiple users and sessions. Documentation, maintenance and procurement considerations Optics that include an oil immersion objective require routine cleaning and appropriate immersion media to maintain performance; following standard laboratory procedures will preserve image quality and extend component life. Photodocumentation via the trinocular port is possible with compatible camera adapters; consult technical specifications for sensor compatibility and adapter options. For accessory allocation and available imaging modules, refer to the separate accessory listing associated with this model. For tailored procurement and technical support regarding the Euromex bScope BS.1153-EPL, contact Metav Werkzeuge for availability, accessory matching and delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.1153-EPL SKU: BS.1153-EPL Brand: Euromex Model series: bScope Product type: biological microscope Data Eyepieces: HWF 10x / 20 mm Objectives: E‑Plan 4x / 10x / S40x / S100x oil Head: Trinocular Illumination: NeoLED Special features Four‑position nosepiece (revolver) Brightfield application (Hellfeld) Label: Biologisches Mikroskop bScope BS.1153-EPL Categories: brightfield microscopes; upright microscopes; educational and life science use FAQ What magnification range does this instrument cover? The Euromex bScope BS.1153‑EPL covers standard brightfield magnifications using the supplied E‑Plan objectives and HWF 10x eyepieces: typical total magnifications are 40x, 100x, 400x and 1000x with oil immersion. Is the trinocular head suitable for photography? Yes, the trinocular configuration of the bScope BS.1153‑EPL allows a dedicated phototube for camera attachment, enabling simultaneous observation and documentation when paired with a compatible camera adapter. Does the instrument include an oil immersion objective? The objective set for the bScope BS.1153‑EPL contains an S100x oil immersion lens; proper immersion oil and routine cleaning are recommended to maintain optical performance. Which illumination system is fitted and what are its benefits? The instrument is equipped with NeoLED illumination, providing stable, cool light that minimises heat transfer to samples and ensures consistent brightness for long observation sessions. For which applications is this microscope best suited? This model is optimised for brightfield examination in educational settings and basic life‑science laboratories, delivering corrected optics and comfortable eyepiece fields for routine teaching and analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Trinocular Biological Microscope IS.3153-PLFi/3 Plan PLFi Objectives 4x/10x/40x/100x Oil, 100 W HBO NeoLED - Euromex

Take advantage of the combination of precision Plan PLFi objectives, robust trinocular head configuration and dual illumination for dependable fluorescence imaging; order the instrument directly via Metav Werkzeuge or consult Metav's specialists for application advice. Biological Microscope iScope IS.3153-PLFi/3 — Trinocular fluorescence microscope with Plan PLFi objectives The Biological Microscope iScope IS.3153-PLFi/3 is a trinocular fluorescence microscope designed for life‑science imaging and documentation, combining high‑contrast fluorescence capabilities with plan‑corrected optics for routine laboratory and teaching applications. Trinocular head for camera and viewing Plan PLFi objectives incl. 100x oil Blue and green fluorescence filter sets Dual illumination: 100 W HBO and NeoLED Reliable fluorescence imaging for clear results Built around a trinocular head and dedicated fluorescence filter sets in blue and green, this instrument delivers consistent contrast for fluorescence samples. The 100 W HBO illumination provides the intensity needed for demanding fluorescence stains, while the integrated NeoLED offers stable brightfield illumination for transmitted‑light observation. Together, these light sources enable efficient switching between modes and reduce downtime during multi‑method protocols. The optical design prioritises even field illumination and minimal aberration, which supports reproducible imaging across experiments. Precision optics that improve measurement and documentation Equipped with Plan PLFi objectives (4x, 10x, S40x, S100x oil), the system maintains flat‑field performance and accurate edge rendering for both qualitative observation and image capture. The plano‑corrected optics reduce field curvature, making it easier to obtain sharp montages and stitched images for documentation. The trinocular configuration reserves a dedicated camera port, allowing simultaneous image acquisition while the eyepieces remain available for live inspection. This balance between observation and documentation streamlines workflows in research laboratories and educational settings. Practical illumination and handling for laboratory workflows The dual‑illumination concept—high‑intensity HBO for fluorescence and NeoLED for routine observation—combines sensitivity and longevity, lowering long‑term operating interruptions. The inclusion of 100x oil objective capability facilitates high‑resolution studies, while the plan correction helps to keep focus across the field when switching magnifications. Dioptre compensation on both eyepieces ensures comfortable binocular viewing and reduces eye fatigue during extended sessions. Robust mechanical control and a camera‑ready head support rapid transitions from sample preparation to image capture, enhancing throughput in busy facilities. For laboratories seeking dependable fluorescence imaging, consult Metav Werkzeuge for technical guidance and procurement—contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and compatibility with existing camera systems. Technical data Article number: IS.3153-PLFi/3 SKU: IS.3153-PLFi/3 Manufacturer brand: Euromex Core data Head: Trinocular Objectives: Plan PLFi 4x / 10x / S40x / S100x oil Illumination: 100 W HBO; NeoLED Product type: Biological microscope Model series: iScope Category: Fluorescence microscopes Special features Blue and green fluorescence filter sets Dioptre adjustment both sides Camera port via trinocular head Plan-corrected objectives for flat field imaging FAQ What illumination options are available for fluorescence and brightfield? The microscope supports both 100 W HBO for fluorescence excitation and NeoLED for brightfield observation, enabling fast switching between contrast modes. Which objectives are included and what magnifications do they provide? Plan PLFi objectives are supplied: 4x, 10x, S40x and S100x oil, offering a wide magnification range for sample overview and high‑resolution detail work. Is the head suitable for simultaneous viewing and camera attachment? Yes, the trinocular head permits parallel eyepiece observation and camera connection via the dedicated camera port for documentation and live capture. Are fluorescence filter sets included for common fluorophores? Blue and green filter sets are part of the configuration, covering many standard fluorophores used in routine life‑science applications. Can the instrument be used in teaching laboratories as well as research facilities? The design combines robust handling, comfortable binocular viewing and camera readiness, making it suitable for both teaching environments and routine research tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Trinocular Biological Microscope iScope IS.3153-PLFi/6 Plan PLFi Objectives, 100W HBO & NeoLED Illumination - Euromex

Take advantage of a fluorescence-ready configuration with a trinocular head and high-quality Plan PLFi objectives for consistent, flat-field imaging; the combined 100 W HBO and NeoLED illumination provides flexibility between intense excitation and prolonged brightfield observation. Order directly via Metav Werkzeuge or ask the Metav consultants for technical guidance and delivery from Emmerich. Biological microscope iScope IS.3153-PLFi/6 by Euromex — trinocular configuration with fluorescence-ready optics Biological microscope iScope IS.3153-PLFi/6 is a laboratory-grade upright microscope designed for fluorescence and routine life‑science applications, combining a trinocular viewing head with Plan PLFi optics and dual illumination for versatile imaging. Trinocular head for simultaneous observation Plan PLFi objectives for high flatness 100 W HBO and NeoLED dual illumination Blue and green fluorescence filter sets Diopter adjustment on both eyepieces Fluorescence-capable layout for laboratory workflows The instrument is built around a trinocular head, which supports simultaneous eyepiece observation and an additional imaging channel, streamlining workflows that combine visual inspection and image capture. The fluorescence-ready configuration — featuring dedicated blue and green filter sets — is paired with a high-output 100 W HBO source for reliable excitation of common fluorophores, while the integrated NeoLED option provides stable, low-heat illumination for transmitted-light applications. This combination reduces downtime between contrast methods and supports routine laboratory throughput. Optical performance that delivers reproducible results The optical train is specified with Plan PLFi objectives (4x, 10x, S40x, S100x oil), which are designed to produce a flat field across the image and consistent sharpness towards the edges. Such correction helps avoid the need for repeated refocusing when scanning large specimens or capturing stitched images, so less time is spent compensating for field curvature. The inclusion of an oil immersion S100x objective extends the resolving power for high-magnification detail, making the system suitable for demanding biological examinations. Flexible illumination for contrasting techniques Dual illumination allows selection between the intense excitation of a 100 W HBO lamp and the continuous, energy-efficient NeoLED source. The former supplies the strong, narrow-band excitation required for many fluorescence applications, while the latter is preferred for extended brightfield observation and when minimising specimen heating is important. The supplied filter sets (blue and green) support a range of fluorophores and make switching between channels rapid and reproducible, aiding comparative imaging and multi-colour experiments. Ergonomics and everyday usability in the lab Practical design details support regular use: diopter adjustment on both eyepieces accommodates operators with differing eyesight without impairing focus, and the trinocular format facilitates image documentation alongside conventional observation. Constructed for routine life‑science environments, the microscope is appropriate for teaching labs, research benches and diagnostic workstations where both fluorescence and transmitted-light techniques are required. For additional specifications or to confirm suitability for a particular protocol, technical advisors are available by e‑mail or telephone. Contact Metav Werkzeuge for product consultation and delivery from Emmerich — technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: IS.3153-PLFi/6 SKU: IS.3153-PLFi/6 Manufacturer: Euromex Facts Illumination: 100 W HBO; NeoLED Objectives: Plan PLFi 4x, 10x, S40x, S100x oil Special features Trinocular head Diopter adjustment on both eyepieces Blue and green fluorescence filter sets Fluorescence microscope category Model series: iScope FAQ Which objectives are supplied with the microscope? The Euromex Biological microscope iScope IS.3153-PLFi/6 (IS.3153-PLFi/6) is supplied with Plan PLFi objectives 4x, 10x, S40x and S100x (oil). Is this system suitable for fluorescence imaging? Yes — the iScope IS.3153-PLFi/6 is configured for fluorescence with blue and green filter sets and a 100 W HBO illumination unit to provide the excitation needed for common fluorescent dyes. Can a camera be attached to the system? Yes — the trinocular head of the Euromex iScope IS.3153-PLFi/6 permits mounting an imaging device on the dedicated third port for simultaneous documentation. What illumination options are available for routine work? The system offers both a high-intensity 100 W HBO lamp for fluorescence excitation and a NeoLED source for stable, low-heat brightfield observation in the Euromex iScope IS.3153-PLFi/6. What ergonomic adjustments support multiple users? The Euromex iScope IS.3153-PLFi/6 includes diopter adjustment on both eyepieces, allowing operators to set individual eye correction without losing focus. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com