Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
3.49mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Reliable shop-floor verification with a 3.49 mm test pin and ultra-fine ±0.001 mm tolerance ensures repeatable end‑measure checks; the 50 mm length and special steel construction support durable, deeper gauging tasks. Order this test pin directly from Metav Werkzeuge or consult our specialists for application advice. Test pin M323.349 — single precision gauge pin, Ø 3.49 mm, ±0.001 mm (Metav IndustryLine) A Test pin M323.349 designed for micro‑range end‑measurement and inspection tasks in workshop environments. Workshop version construction Diameter 3.49 mm, tolerance ±0.001 mm Length 50 mm for deeper measurements Special steel for robust wear resistance Precision tailored for micro measurements This single‑piece gauge pin delivers micrometre‑level control in a compact format. With a nominal diameter of 3.49 mm and a declared tolerance of ±0.001 mm, the pin suits micro‑range verification where repeatability is critical; it is classified for the micro measurement band (max. range up to 100 mm). The tight tolerance reduces measurement uncertainty during end‑dimension checks, helping to cut rework and maintain production throughput with predictable inspection cycles. Built for workshop use and straightforward handling The workshop‑grade finish and special steel composition provide mechanical resilience for routine shop use while keeping handling simple. At 50 mm overall length the pin reaches recessed bores and faces without losing rigidity, and its low mass supports rapid manipulation during sampling. Delivery in a protective box ensures the pin arrives free of transit damage and is convenient to store between uses, preserving the calibrated surface for longer service life. Integration into quality processes and traceability As a single verification element, the pin is ideal for go/no‑go checks, plugging fixtures or as a reference in comparator setups where a defined end‑measure is needed. The clear article identification and supplied GTIN support inventory control and traceability in quality documentation. For tailored advice on fitting the pin into existing jigging and inspection routines, Metav’s technical team can advise on mounting and handling to maintain measurement reliability. Contact Metav Werkzeuge today to source the Metav IndustryLine Test pin M323.349 or to request application guidance from our workshop measurement specialists Technical Data Article number: M323.349 GTIN: 4061905059094 Label: Prüfstift, einzeln, 3,49mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 3.49 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.006 kg Special features Material: Special steel Workshop version Supplied in protective box Single test pin FAQ What is the declared tolerance of this test pin? The test pin M323.349 from Metav IndustryLine has a declared tolerance of ±0.001 mm, suitable for micro‑range verification tasks. For which measurement range is this pin intended? The pin is intended for the micro measurement band; the nominal diameter is 3.49 mm and the overall length is 50 mm, making it appropriate for compact, high‑precision checks. Is the pin supplied ready for storage and transport? Yes, the Metav IndustryLine test pin M323.349 is supplied in a protective box to prevent damage during transport and to support safe storage. Can this single pin be used for fixture or comparator reference points? The gauge pin M323.349 is suitable as a reference element in simple fixtures and comparator setups where a defined, repeatable diameter is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.4mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the ±0.001 mm tolerance and compact 3.40 mm diameter combined with a 50 mm working length for reliable end‑measure verification and repeatable shop‑floor checks. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants to ensure correct integration into inspection routines. M323.340 Gauge Pin (3.40 mm) – ±0.001 mm tolerance, 50 mm length, Metav IndustryLine The M323.340 gauge pin is a workshop‑grade precision inspection pin designed for tight‑fit checks and end‑measure verification in production and quality control environments Workshop-grade precision inspection pin Diameter 3.40 mm for tight fit checks Tolerance ±0.001 mm for micrometre accuracy 50 mm hardened special steel construction Precision where micrometres decide A compact inspection pin with a 3.40 mm nominal diameter and ±0.001 mm specification enables highly reliable pass/fail checks for small bores and mating parts. The fine tolerance corresponds to micrometre‑level control and reduces uncertainty when validating end dimensions or verifying tooling fits. In practical terms, the small diameter and tight tolerance make this instrument suitable for precision assembly, inspection fixtures and verification of final measures on turned or drilled components. The design supports straightforward use in repeatability tasks where consistent contact geometry and minimal deformation are essential. Built for repetitive workshop use Constructed as a workshop‑grade item from special steel, this inspection pin balances handling ease with dimensional stability. With a 50 mm overall length, the pin grants sufficient reach for many standard checks without unnecessary leverage that could compromise repeatability. The low mass aids manual placement while the robust material withstands routine use in production areas. As a single‑piece precision pin, it streamlines inspection workflows where frequent insertion and withdrawal are required, helping to maintain consistent measurement conditions and reduce rework caused by uncertain fits. Practical application and measurement benefits In application, the gauge pin functions as a reliable reference for bore checks, end‑measure verification and fixture validation. Used with simple go/no‑go assemblies or as a reference in jigs and gauges, the pin helps shorten inspection cycles and contributes to stable process control. The precision offered by the specified tolerance supports tighter acceptance criteria and fewer downstream adjustments, improving overall production yield. Routine good practice includes gentle handling, clean‑room‑free storage and periodic verification against calibrated references to preserve the stated accuracy. Contact Metav Werkzeuge today to secure the M323.340 gauge pin for precise end‑measure verification or to discuss tailored inspection solutions with our specialists Technical data Article number: M323.340 GTIN: 4061905058080 Brand: Metav IndustryLine Core specifications Diameter: 3.40 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Workshop version Material: special steel Single gauge pin for inspection and verification Intended use: end‑measure verification FAQ What materials is the M323.340 suitable for inspecting? The M323.340 gauge pin (Metav IndustryLine) is primarily a dimensional reference for metallic and machined bores; material compatibility is determined by the workpiece rather than the pin itself. How significant is the ±0.001 mm tolerance in everyday inspection? A tolerance of ±0.001 mm places the inspection pin in the micrometre class, allowing the M323.340 to serve where high repeatability and tight acceptance limits are required in precision manufacturing. Is the M323.340 intended for production or laboratory use? The M323.340 is a workshop‑grade inspection pin designed for routine shop‑floor and production checks while still offering the precision needed for stringent quality control tasks. How should the gauge pin be maintained to preserve accuracy? Regular cleaning, avoidance of impacts, and storage in a dry, clean environment are recommended for the M323.340; periodic verification against calibrated standards will ensure continued performance. Can the M323.340 be used in fixture or jig assemblies? Yes, the M323.340 gauge pin (Metav IndustryLine) is suitable as a fixed reference or removable checking element in fixtures and jigs where consistent contact geometry is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5 mm Limit Plug Gauge With Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Combining DIN 7162 conformity, hardened steel construction and a wear allowance on the Go side yields a durable checking tool for repeatable bore inspections; order the gauge directly via Metav Werkzeuge or consult our advisers for application guidance. Limit plug gauge G7 — 3.5 mm, hardened steel (Filetta) Limit plug gauge G7 is a hardened-steel go/no-go gauge designed for rapid acceptance checks of small bores in production and quality control. Hardened steel construction Complies with DIN 7162 standard Wear allowance on the Go side Diameter 3.5 mm precision Reliable checks for small bores The limit plug gauge is intended for fast, unequivocal go/no-go inspections in the workshop and at in‑process control stations. Manufactured to DIN 7162, the tool offers standardised dimensions for consistent interchangeability across gauges and fixtures. With a nominal diameter of 3.5 mm, the gauge pin provides a compact solution for verifying small internal diameters without the need for complex measuring setups, enabling straightforward acceptance decisions and reducing inspection time. Designed to maintain accuracy and lifetime Constructed from hardened steel, the gauge resists wear and mechanical damage during repetitive use, which secures measurement stability over many cycles. The specified wear allowance on the Go side compensates for gradual material loss at the contact zone: this means the initial pass/fail boundary is conservatively set so that the Go end remains reliable as the gauge accumulates wear, thereby extending the service life and reducing replacement frequency. Such design reduces process interruptions and supports predictable maintenance planning. Practical integration into production and inspection routines As a dedicated measuring pin, the device integrates easily into gauge sets, test benches and handheld Go/No‑Go routines; the compact geometry allows quick handling and minimal fixturing. The simple acceptance logic of a limit plug gauge shortens operator training and accelerates throughput in inspection loops, delivering measurable time savings. For specific application scenarios or assistance with fixture compatibility, Metav’s technical advisers can provide pragmatic recommendations tailored to production needs. For standard-compliant bore checks and tailored application advice, order the Filetta limit plug gauge G7 via Metav Werkzeuge or contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS911.163 Manufacturer: Filetta Product: Limit plug gauge G7 Facts Diameter: 3.5 mm Standard: DIN 7162 Special features Material: hardened steel Wear allowance on the Go side Category: gauge pins / measuring pins FAQ What is the primary purpose of this limit plug gauge? The Filetta limit plug gauge G7 (MS911.163) is used for quick go/no-go inspections of small internal diameters to support fast acceptance decisions in production and quality control. Which standard does the gauge comply with? The gauge is manufactured to DIN 7162, ensuring standardised dimensions and compatibility with conventional metrology practices. What material is the gauge made from and why is that important? This limit plug gauge is made of hardened steel, which improves wear resistance and maintains functional tolerances during repetitive use. What does "wear allowance on the Go side" mean in practice? The wear allowance on the Go side means the Go end is dimensioned to allow a controlled amount of wear before it affects pass/fail decisions, extending the gauge’s usable life while preserving inspection reliability. Can this gauge be used on a shop floor for routine checks? Yes, the compact 3.5 mm gauge pin is suitable for routine shop‑floor Go/No‑Go checks and can be incorporated into simple test fixtures or handheld inspection procedures. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
3.5 mm Limit Plug Gauge With Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of a robust inspection tool that combines hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the good side for reproducible pass/fail checks; order the gauge via Metav Werkzeuge or request advice from our consultants for specification alignment. Filetta Limit plug gauge MS911.205 — hardened steel, DIN 7162, Ø 3.5 mm The Filetta Limit plug gauge is a compact inspection gauge for verifying internal diameters to DIN 7162, engineered for repeatable go/no‑go checks in production and quality control environments Hardened steel construction DIN 7162 compliant Wear allowance on good side Compact inspection gauge Ø3.5 mm Consistent go/no‑go verification for production control The limit plug gauge delivers a straightforward, objective decision at the workstation by separating acceptable bores from non‑conforming ones. Made from hardened steel, the gauge resists deformation and keeps the acceptance limits stable over long series, which reduces false rejects and costly rework. Compliance with DIN 7162 provides a recognised reference for inspectors and supports consistent acceptance criteria in incoming, in‑process and final inspections. Traceability and measurement clarity reduce uncertainty Marked limits and a clear go/no‑go function speed up inspection throughput while keeping measurement uncertainty low. The integrated wear allowance on the good side accounts for gradual material loss at the contact face, extending the effective service life before recalibration or replacement is required. This pragmatic design choice maintains inspection reliability without adding complexity to routine checks. Durable design for workshop conditions and regular handling Robust material selection and a compact form factor make the gauge well suited to repeat handling on shop floors and inspection benches. The small diameter of Ø 3.5 mm is ideal for fine bores and small components where space is limited; its finish and hardness ensure resistance against surface damage and sticking, which otherwise compromise pass/fail clarity and slow down quality routines. Practical integration and procurement advantages Using a standardised limit plug gauge simplifies documentation and reduces training time for inspectors: the pass/fail logic is immediate and requires no interpretation of numerical tolerance stacks. The gauge is a maintenance‑friendly tool that supports steady production flow and predictable inspection intervals, enabling planners to focus on process improvements rather than ad‑hoc measurement disputes. For purchase enquiries, technical clarifications or to source complementary inspection tools from Filetta, contact Metav Werkzeuge for personalised guidance and reliable delivery from Emmerich. Technical data Article number: MS911.205 Name: Limit plug gauge (Grenzlehrdorne) Manufacturer: Filetta Numbers / Core technical data Diameter: 3.5 mm Standard: DIN 7162 Designs / Special features Material: hardened steel Special feature: wear allowance on good side FAQ What acceptance standard does this gauge follow? The limit plug gauge is manufactured to meet DIN 7162, ensuring that acceptance limits correspond with widely used industrial inspection criteria. Which material is used for the gauge body? The gauge is produced from hardened steel, which provides dimensional stability and abrasion resistance for routine use. How does the wear allowance affect inspection? The wear allowance on the good side compensates for gradual surface wear, prolonging the useful life of the gauge and keeping go/no‑go decisions consistent over time. Is this gauge suitable for small bore inspection? Yes, its Ø 3.5 mm size is designed specifically for small bores and fine components where compact inspection gauges are required. What is the SKU for ordering or referencing the product? Reference the article number MS911.205 when specifying or ordering the Filetta limit plug gauge. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
3.51mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micron accuracy, compact size and workshop robustness for reliable end‑dimension verification; order directly via Metav Werkzeuge or consult the sales team for integration advice. M323.351 Gauge Pin — 3.51 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.351 engineered for high‑precision end‑dimension checks in metrology and workshop quality control Sub‑micron tolerance ±0.001 mm 3.51 mm diameter for precision fits 50 mm length, workshop execution Reduce rejects with measurable, repeatable accuracy The M323.351 is built to deliver repeatable measurements where a few micrometres make the difference between pass and rework. With a declared tolerance of ±0.001 mm, the pin enables reliable verification of end dimensions and tight bores, reducing uncertainty in incoming inspection and setup tasks. The small diameter supports verification of narrow features and mating parts, while the precise tolerance helps to ensure process stability and fewer downstream corrections. Workshop‑grade construction for everyday handling Manufactured from special steel in a workshop‑grade design, this precision pin combines dimensional stability with practical robustness. Its 50 mm length provides a useful reach for many standard fixtures without compromising handling, and the lightweight construction simplifies manual gauging tasks. The construction standard supports repeated use in production environments, so routine checks remain quick and consistent, contributing to efficient machine setups and shorter inspection cycles. Seamless fit into inspection and production routines This precision tool is intended for end‑dimension verification, gauge setting and spot checks during assembly or final inspection. Its compact form factor and 3.51 mm diameter make it suitable for narrow bores and precision components across toolmaking, small‑part manufacturing and quality labs. Backed by Metav IndustryLine’s quality filter in Emmerich and decades of distribution experience, the pin complements measurement chains that prioritise traceable, reproducible results. For procurement or technical ordering of the Metav IndustryLine M323.351 gauge pin, contact Metav Werkzeuge for product availability and specific integration recommendations via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.351 GTIN: 4061905059117 Label: Prüfstift, einzeln, 3,51mm, +/- 0.001 mm Länge 50 mm Key measurements Diameter: 3.51 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Materials & features Material: special steel Workshop execution Single gauge pin Application: end‑dimension checks FAQ What tolerance does this gauge pin provide? The M323.351 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, suitable for sub‑micron end‑dimension verification. What are the exact dimensions of the pin? The pin measures 3.51 mm in diameter and 50 mm in length (SKU: M323.351). What material is the pin made from? This item is made of special steel, chosen for dimensional stability and workshop durability. For which tasks is this pin most suitable? It is intended for end‑dimension checks, gauge setting and spot inspection of narrow bores and precision components in toolmaking and small‑part production. Is the item supplied as a single unit or a set? The product is supplied as a single gauge pin (labelled as einzeln); packaging specifics are not listed in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.52mm Test Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, a compact 3.52 mm diameter and a 50 mm working length for dependable end‑measurements in workshop environments; the workshop‑grade design and protective case keep the pin ready for repeated use. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application guidance. M323.352 Gauge pin (3.52 mm) — ±0.001 mm tolerance, 50 mm length The M323.352 is a single precision gauge pin designed for end‑measurements and dimensional checks in workshop and inspection routines, combining a narrow diameter with tight tolerance for consistent size verification. Diameter 3.52 mm with ±0.001 mm tolerance 50 mm overall length for end‑measurements Workshop version made from special steel Supplied in a protective case for transport Precision that reduces rework and strengthens quality control A compact diameter of 3.52 mm combined with a tolerance of ±0.001 mm delivers measurable benefits for final size verification and pass/fail inspection tasks. The extremely small permissible deviation means that the pin serves as a reliable reference for end‑measurements, lowering the risk of false acceptance and reducing repeat machining. In practical terms, this level of accuracy supports tighter process control and fewer downstream defects, which in turn saves time and material costs. Robust workshop design for everyday handling The workshop execution and special steel construction are chosen for durability under frequent use. With a usable 50 mm length the pin is long enough for secure placement in gauges and fixtures while remaining easy to handle by a single operator. Supplied in a protective case, the component remains protected from knocks and contamination during storage and transport, preserving its geometry and ensuring consistent measurement behaviour across repeated cycles. Practical metrology benefits for integration into inspection routines As a compact, high‑precision reference, this gauge pin supports rapid comparative checks and fits into slot, bore and plug gauge arrangements where small diameters are required. Its low mass and precise ground geometry provide excellent repeatability, making it suitable for both ad hoc verification on the shop floor and formal inspection steps in a quality plan. The combination of size, tolerance and durable material contributes to reliable measurement results and predictable production outcomes. For precision end‑measurement tasks choose the Metav IndustryLine M323.352 gauge pin — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: M323.352 GTIN: 4061905060076 Material: Special steel Designation: Prüfstift, einzeln, 3,52 mm, ±0.001 mm, Länge 50 mm Measurements / Core data Diameter: 3.52 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Features / Delivery Workshop execution Supplied in protective case Story trigger: endmasse SKU: M323.352 FAQ What level of precision does this gauge pin provide? The gauge pin from Metav IndustryLine offers a tolerance of ±0.001 mm, which is suitable for tight end‑measurements and high‑repeatability checks. Is the pin suitable for regular workshop use? Yes, the workshop version is manufactured from special steel and is designed for frequent handling and routine inspection tasks. Can this pin be used for bore and plug comparisons? The 3.52 mm diameter and ground geometry make the pin appropriate for plug‑type checks and comparative gauge arrangements where small diameters are required. How is the pin delivered to protect its geometry? The component is supplied in a protective case to prevent damage during transport and storage and to help maintain measurement reliability. Which identifier should be used when ordering or specifying this item? Use the SKU M323.352 or the GTIN 4061905060076 when specifying or ordering the gauge pin from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.53mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, ±0.001 mm tolerance and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application support. Gauge pin M323.353 — test pin, 3.53 mm diameter, ±0.001 mm (Metav IndustryLine) The gauge pin M323.353 is a workshop‑grade test pin designed for precise end‑dimension checks and fitting verification in production and inspection environments. Workshop version for industrial use Diameter 3.53 mm, tolerance ±0.001 mm 50 mm special steel pin for stable handling Supplied in a protective transport case Repeatable end‑dimension checks for quality control The small diameter and tight ±0.001 mm tolerance ensure consistently reproducible measurements when checking bore sizes, plug fits or component end dimensions. This level of accuracy corresponds to a fine metrological grade suitable for tactile inspection tasks where deviation must be kept to a minimum. The design reduces uncertainty in go/no‑go assessments and supports traceable inspection routines on the shop floor, contributing to stable production quality and faster decision‑making during first‑article inspections. Robust workshop construction that speeds up inspection Manufactured from special steel in a workshop configuration, the pin combines wear resistance with a compact 50 mm length that is easy to handle and store. The single‑piece supply format simplifies inventory management and avoids the confusion of sets for repetitive checks. Delivered in a protective transport case, the component is protected against transit damage and contamination, which helps to maintain measurement integrity and reduces downtime due to rework or cleaning. Simple integration into existing inspection workflows As a precision end‑measurement tool, the pin integrates with common verification processes such as bore gauging, seat testing and dimensional stamping checks. Its nominal diameter of 3.53 mm and fine tolerance make it particularly useful for end‑mass checks where small clearances determine part acceptance. The compact form factor supports fast handling, so inspection cycles remain efficient while delivering the fine accuracy required for quality assurance in small to medium components. For assured measurement reliability with Metav IndustryLine components, request further technical details or an application consultation from Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.353 GTIN: 4061905060083 Label: Prüfstift, einzeln, 3,53mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 3.53 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: special steel Version: workshop execution Delivery: single test pin Protective transport case included Application focus: end‑dimension checks FAQ What is the intended use of this gauge pin? The gauge pin M323.353 from Metav IndustryLine is intended for precise end‑dimension and fit checks such as bore gauging and plug tests in workshop and production inspection tasks. Is the pin suitable for repeated use in a production environment? Yes. The workshop execution and special steel construction make the gauge pin suitable for repeated handling and frequent inspection cycles while maintaining the specified ±0.001 mm tolerance. Does the product come with a protective case? A protective transport case is supplied with the single gauge pin to prevent transit damage and contamination during storage and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.54mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The combination of industrial-grade accuracy, compact form and a workshop-hardened finish ensures reliable end‑measure checks and long service life; supplied ready for protected transport, the pin supports efficient inspection workflows. Order the M323.354 gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.354 Gauge Pin – Ø 3.54 mm, ±0.001 mm (Workshop Grade) The M323.354 is a workshop-grade gauge pin designed for precise end‑measure verification and fit checking in jigs, fixtures and inspection routines. Ø 3.54 mm with ±0.001 mm tolerance Length 50 mm Workshop-grade special steel Delivered in protective transport case Exact small-diameter checks for consistent quality High-precision manufacturing of small diameters is often the deciding factor in assembly and inspection. This gauge pin delivers a certified tolerance of ±0.001 mm, which permits repeatable verification of bore fits and end measures where micrometric conformity is required. The combination of a precise diameter of Ø 3.54 mm and a compact length ensures minimal deflection during alignment tasks; as a result, inspection processes can be standardised and measurement variation reduced. Using a dedicated pin for end‑measure verification simplifies go/no‑go assessments and supports process control documentation. Robust workshop design that withstands daily use A workshop environment demands tools that resist wear without sacrificing accuracy. Machined from special steel and finished as a workshop-grade component, the pin resists surface damage from repeated seating in bores and mounting fixtures. At approximately 0.007 kg, the component is easily handled and positioned, while its 50 mm shank length provides sufficient engagement for stable checks without being unwieldy. Supplied in a protective transport case, the item is ready for safe storage and transport between inspection benches, minimising the risk of accidental damage and preserving the calibrated condition. Easy integration into metrology and assembly processes Designed for direct use in inspection jigs, plug gauge arrangements and end‑measure controls, the pin functions as a reliable reference for both manual and semi‑automated checks. Its compact geometry makes it suitable for confined setups and multi‑point alignment tasks, while being straightforward to document in quality records. The product is traceable via its SKU and GTIN for inventory control and quality management systems, enabling clear part identification in procurement and calibration logs. For workshops seeking to streamline routine checks, this small gauge component is a practical, high‑precision building block. For precise inspection needs, contact Metav Werkzeuge to request the Metav IndustryLine M323.354 gauge pin and confirm suitability for specific inspection procedures; Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.354 GTIN: 4061905060090 Weight: 0.007 kg Material: Special steel Diameter: 3.54 mm Length: 50 mm Tolerance: ±0.001 mm Workshop version Supplied in transport case Core specifications Diameter: 3.54 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Workshop-grade finish Special steel construction Protective transport case for delivery SKU: M323.354 Intended for end‑measure verification (storytrigger: endmasse) FAQ What applications is this gauge pin suited for? The M323.354 gauge pin is suitable for end‑measure verification, bore fit checks and fixture alignment in workshop and inspection settings. How precise is the diameter and what does the tolerance mean? The pin is manufactured to Ø 3.54 mm with a tolerance of ±0.001 mm, meaning the actual diameter will lie within that narrow band to ensure consistent fit testing. Is the gauge pin protected for transport? Yes, the product is supplied in a protective transport case to reduce the chance of damage during storage and movement. What material is used and why does it matter? Constructed from special steel, the pin offers enhanced wear resistance and surface stability, which helps maintain dimensional integrity during repeated use. How can the pin be referenced in inventory and quality systems? The component is identifiable by SKU M323.354 and GTIN 4061905060090 for clear tracking in procurement and calibration records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.55mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine ±0.001 mm accuracy and robust special steel construction for repeatable end‑measurement tasks; order directly via Metav Werkzeuge or ask our consultants for application advice. M323.355 Test Pin (3.55 mm, ±0.001 mm; 50 mm) – Metav IndustryLine The M323.355 Test Pin is a single precision inspection pin designed for reliable end‑measurements and gauging tasks in workshop and production environments Workshop design for robust daily use Diameter 3.55 mm with ±0.001 mm accuracy 50 mm overall length for end‑measurements Supplied in protective transport case Precision that reduces rework and inspection time The finely finished inspection pin delivers an accuracy of ±0.001 mm, equivalent to one micrometre, which provides a clear, objective measurement basis for critical end‑dimensions. This level of precision minimises the need for repeat checks and reduces downstream rework; in practice it helps to keep assembly tolerances within specification and supports efficient quality control processes. The narrow 3.55 mm diameter and the precise length control are tailored for tight bore and end‑face checks where repeatability is decisive. Mechanical robustness for everyday workshop use Made from special steel and supplied in a protective transport case, this workshop version is engineered for frequent handling and secure transport between bench and machine. The 50 mm overall length offers a practical working reach without compromising stiffness, so contact stability is maintained during manual gauging tasks. The compact mass contributes to responsive handling while the material choice ensures wear resistance in contact applications, extending the service life and lowering total cost of ownership through fewer replacements. Simple integration into established inspection routines The single inspection pin is suitable as a fixed reference for end‑measurement, gauging fixtures or portable checks where a small, repeatable contact element is required. Its uncomplicated geometry allows quick seating in holders or adapters and straightforward comparison against master gauges. Where traceable results are required, the product supports documentation workflows through standard metrology practice and clear numerical outcomes rather than subjective assessment, improving decision speed on shop‑floor acceptance. Contact Metav Werkzeuge for tailored advice or to order the Metav IndustryLine test pin directly from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.355 GTIN: 4061905055577 Category: Messstifte Weight: 0.007 kg Facts Diameter: 3.55 mm Length: 50 mm Accuracy: ±0.001 mm Special features Material: special steel Workshop version Supplied in protective transport case FAQ What tolerances can be reliably checked with this inspection pin? The inspection pin achieves ±0.001 mm tolerance performance, making the M323.355 Test Pin (Metav IndustryLine) suitable for micrometric end‑measurement tasks where variations of one micrometre matter. Is the test pin suitable for repeated shop‑floor use? Yes, the workshop design and special steel construction enable durable, repeated use; the supplied protective transport case keeps the pin secure during storage and handling. Can this pin be mounted in gauging fixtures or holders? The straight geometry and standard diameter allow the pin to be seated in common holders and fixtures for comparison and fixed reference applications. Does the product include calibration documentation? Calibration information is provided according to the product labelling and delivery scope; please contact Metav Werkzeuge for details about traceability and certificates. What typical applications suit a 3.55 mm, 50 mm inspection pin? Common uses include end‑face checks, small bore gauging, fixture reference points and final inspection of machined components where compact, repeatable contacts are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.56mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade build and sub-micron repeatability in a compact test pin; the combination of ±0.001 mm tolerance and a precise Ø 3.56 mm diameter ensures reliable end measurements and consistent inspection results — order the item directly via Metav Werkzeuge or consult our specialists for application advice. M323.356 Gauge pin — single test pin, Ø 3.56 mm, ±0.001 mm (Metav IndustryLine) The M323.356 is a single gauge pin designed for workshop metrology and end‑measurement tasks where a compact, high‑precision reference is required. Workshop-grade construction Diameter Ø 3.56 mm, length 50 mm High precision ±0.001 mm tolerance Special steel for wear resistance Consistent, measurable precision for inspection routines The compact test pin delivers repeatable reference points for go/no‑go checks, fixture setting and bore verification. With a declared tolerance of ±0.001 mm, the component provides a measurable improvement in dimensional control compared with coarser gauge tools; this precision reduces uncertainty during sampling and supports faster decision‑making in quality control protocols. The specified Ø 3.56 mm and 50 mm usable length make the pin well suited to small‑bore inspections and as a reference in micrometric checks without introducing excess overhang or deflection. Durable workshop design that withstands daily use Built as a workshop‑grade instrument from special steel, the pin combines a wear‑resistant surface with a geometry that resists deformation during repeated seating and removal. The light mass and compact form aid handling and reduce operator fatigue during repetitive checks, while the robust material choice prolongs service life in production environments. The single‑piece design minimises potential error sources and preserves the reference geometry over time, thereby lowering long‑term replacement frequency and contributing to predictable maintenance scheduling. Integrates smoothly into inspection and setup workflows As a single test pin with a clear item identity, the part can be used as a datum for setting up jigs, aligning fixtures or verifying bore diameters against production tolerances. Traceability is supported by the provided SKU and GTIN, facilitating inventory control and procurement within established supply chains. The pin’s compact dimensions allow straightforward storage and rapid deployment at the inspection station, helping to shorten setup times and increase throughput in routine quality checks. The product is therefore an efficient tool for workshops seeking to tighten process control without complex instrumentation. Contact Metav Werkzeuge today to request a quote for the M323.356 gauge pin or to discuss its suitability for inspection tasks — our specialists in Emmerich are available by email or phone Technical data Article number: M323.356 GTIN: 4061905055584 Label: Prüfstift, einzeln, 3,56mm, +/- 0.001 mm Länge 50 mm Category: Messstifte Manufacturer: Metav IndustryLine Facts Diameter: 3.56 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Accuracy class: ±0.001 Special features Workshop execution Material: special steel Single test pin delivery Story trigger: end measurement FAQ What tolerance is guaranteed for this gauge pin? The M323.356 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision reference and inspection tasks. What are the physical dimensions and weight of the test pin? The test pin measures Ø 3.56 mm with a length of 50 mm and a weight of 0.007 kg, designed for compact inspection setups. What material is used for the pin and how does that affect wear? The pin is manufactured from special steel in a workshop‑grade finish; this material selection increases wear resistance and helps preserve the reference geometry during repeated use. Can this pin be used as an end standard for bore checks and fixture setting? Yes — the compact geometry and tight tolerance make the M323.356 suitable as an end standard for bore verification, fixture alignment and setting tasks in production and repair workshops. How is the product identified for procurement and inventory? Identification is provided via SKU M323.356 and GTIN 4061905055584, facilitating ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.57mm Gauge Pin, Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, 3.57 mm diameter and 50 mm length for reproducible end‑dimension checks; order the part directly via Metav Werkzeuge or consult our technical advisors for application matching. M323.357 gauge pin — 3.57 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.357 gauge pin is a single, workshop‑grade inspection pin for end‑dimension verification and fixture set‑up in precision manufacturing environments. Workshop-grade precision ±0.001 mm Diameter 3.57 mm, ground finish Length 50 mm for fixture and end gauges Reproducible reference for end‑dimension inspection A compact, hardened reference element delivers consistent results when measuring finished diameters or setting up jigs. The 3.57 mm nominal diameter combined with the ±0.001 mm manufacturing tolerance creates a reliable reference surface that reduces measurement uncertainty. In practice, a stable reference pin shortens inspection cycles and improves quality control throughput by offering a repeatable datum for comparative or go/no‑go procedures. This benefit is especially relevant where small deviations can affect assembly fit or functional clearance. Robust material and workshop suitability Manufactured from special steel, the pin resists wear during frequent seating and removal cycles common in workshop routines. The workshop specification emphasises a ground finish for smooth seating and minimal surface deformation, which preserves the calibrated dimension over repeated use. The compact 50 mm shaft length provides adequate engagement in fixtures while remaining easy to handle, enabling single‑operator checks without sacrificing stiffness or repeatability. Practical integration into measurement workflows Lightweight and straightforward to use, the pin simplifies routine checks within production lines and inspection benches. At roughly 0.007 kg, handling is effortless and the item is appropriate for both bench inspection and fixture insertion. The single‑piece design suits direct incorporation into assembly jigs as a fixed reference or as a portable master for spot checks. Clear numerical specifications and material definition make the component easy to document in quality records and to include in process control plans. For precise end‑dimension control request the M323.357 through Metav Werkzeuge — our Emmerich team provides technical advice to ensure the pin fits the intended inspection task. Technical data Article number: M323.357 GTIN: 4061905055591 Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 3.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Workshop execution Single gauge pin (individual supply) Material: special steel Category: gauge pins FAQ What is the declared tolerance of this gauge pin? The M323.357 gauge pin is manufactured to a tolerance of ±0.001 mm, making it suitable as a high‑precision reference in workshop inspection routines. Which material is used for the pin? This gauge pin is made from special steel, selected for wear resistance and dimensional stability under repeated seating. Is the pin supplied individually or as part of a set? The article is supplied individually, as a single inspection pin suitable for fixture installation or portable use. Can the pin be used for jig and fixture set‑up? Yes — the 50 mm length and ground finish allow the pin to serve as a stable datum in jigs, fixtures and end‑dimension verification checks. What is the item weight for handling considerations? The pin weighs approximately 0.007 kg, facilitating easy manual handling and minimising added load on lightweight fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.58mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of a combination of exacting ±0.001 mm tolerance and robust, workshop‑grade construction to ensure repeatable end‑dimension checks. Order the test pin directly via Metav Werkzeuge or contact our advisers for application support. Test pin M323.358 — Precision gauge pin 3.58 mm, ±0.001 mm Test pin M323.358 is a workshop‑grade gauge pin intended for precise end‑dimension and fit verification in fixtures, gauges and assembly jigs. Accuracy ±0.001 mm for end‑dimension checks Diameter 3.58 mm, hardened special steel Length 50 mm for stable insertion depth Workshop version with transport case included Consistent accuracy for process control and quality gates The Test pin M323.358 is engineered as a high‑precision gauge pin for repeatable dimensional checks. With a tolerance of ±0.001 mm, it supports tight control limits that reduce downstream rework and improve first‑pass yield. The narrow diameter of 3.58 mm minimises contact area while keeping radial runout low; this makes the pin suitable for final go/no‑go verification, plug gauges and end‑mass inspection where dimensional certainty is essential. The design favours straightforward integration into existing inspection fixtures and manual gauge sets. Robust handling and workshop suitability for everyday use Designed as a workshop‑grade component, this test pin balances durability with ease of handling. Its 50 mm length gives ample insertion depth for stable seating in jigs without excess overhang, and the low mass keeps operator fatigue to a minimum during repeated use. Delivered in a protective transport case, the pin is protected in transit and during storage, helping to preserve measurement integrity and extend service life. The compact dimensions also make it convenient to include in portable gauge kits for on‑site checks. Material choice and durability explained Manufactured from special steel, the pin is intended for repeated engagement in contact inspection routines. The material selection focuses on surface wear resistance and dimensional stability under frequent use; this ensures that the pin maintains the specified tolerance over many cycles. Where repeatability is required, the construction minimises surface deformation and maintains geometric form so that comparative and reference measurements remain reliable without frequent replacement. Practical applications and process advantages The pin is primarily used for end‑dimension verification, alignment of small bores, plug gauge checks and positional verification in fixture assembly. In production environments it simplifies go/no‑go decisions and accelerates inspection throughput by providing a single, traceable datum for fit assessments. Because the component is supplied as a single, workshop‑ready item, it can be added directly to existing gauge sets or used as a reference pin in small‑batch quality control, supporting lean inspection workflows and faster setup times. Contact Metav Werkzeuge today for ordering details and to discuss how the M323.358 can be integrated into existing gauges — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.358 GTIN: 4061905055607 Category: Gauge pins Type: Test pin, single piece Facts Diameter: 3.58 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: special steel Workshop version Delivered in protective transport case Intended for end‑dimension and fit checks Supplied as a single piece FAQ What tolerance does the pin offer and for which checks is it suitable? The test pin M323.358 provides a tolerance of ±0.001 mm and is suitable for end‑dimension, plug‑gauge and fit verification tasks in fixture and gauge applications. Is the pin supplied ready for use and how is it packaged? The M323.358 is supplied as a single, workshop‑grade pin and is delivered in a protective transport case to maintain its condition during storage and transport. What material is used for the pin and why? The pin is made from special steel selected for durability and dimensional stability under frequent contact inspection, helping to preserve the specified tolerance over many cycles. Can this pin be integrated into existing gauge sets? Yes — the pin’s standard diameter and 50 mm length make it straightforward to add to portable gauge kits, fixture assemblies or plug‑gage stations without special adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.59mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the precise combination of ±0.001 mm dimensional accuracy, compact 3.59 mm diameter and workshop‑ready robustness for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for specification support. M323.359 gauge pin — 3.59 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) M323.359 is a compact gauge pin for workshop and inspection use, designed to deliver repeatable end‑measurement and fit checks in production and quality control environments. Diameter 3.59 mm with ±0.001 mm tolerance Length 50 mm workshop version Special steel for wear resistance Supplied in a transport case Repeatable precision for critical end‑measurements The core advantage of this gauge pin is its ±0.001 mm tolerance, which enables highly repeatable checks of bore diameters and mating fits where small deviations matter. With a nominal 3.59 mm diameter, the pin serves as a reference for end‑dimension verification and go/no‑go comparisons within tight production tolerances. The fine accuracy reduces uncertainty in quality control and supports consistent process control across batches. Workshop design that endures everyday use Constructed from special steel and specified as a workshop version, the pin balances toughness with the dimensional stability required for routine inspection tasks. At 50 mm length and approximately 0.007 kg, the component is easy to handle and resists deformation under normal use, which prolongs service life and lowers replacement frequency. The material choice improves wear resistance on contact surfaces, helping to protect measurement reliability over time. Practical handling and storage for inspection workflows Delivery in a dedicated transport case keeps the pin protected between uses and simplifies storage on the shop floor or in inspection cabinets. The compact form factor makes the pin straightforward to integrate into existing inspection routines, fixtures and gauge sets, reducing cycle time for manual checks. Clear marking (SKU M323.359) and catalogue data enable traceability in inventory management and inspection logs. Suitable applications across production and maintenance This gauge pin is engineered for end‑dimension and fit checks in assembly, machining and maintenance tasks. Typical uses include bore checking, alignment referencing and comparator-based quality control where a stable plug reference is required. The robust workshop specification and precise tolerance make the item a dependable tool for both routine inspections and occasional verification tasks in small to medium production environments. For procurement and technical advice on the Metav IndustryLine M323.359 gauge pin with ±0.001 mm accuracy, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss order options and delivery details Technical data Article number: M323.359 GTIN: 4061905055614 Manufacturer: Metav IndustryLine Data Diameter: 3.59 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Workshop version Material: special steel Supplied in transport case Category: gauge pins FAQ What tolerance does this gauge pin offer? The M323.359 gauge pin is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and wear resistance in workshop conditions. How is the item delivered for safe storage? Delivery is in a dedicated transport case to protect the pin during transport and storage. Can this pin be used for bore and fit checks? Yes — the M323.359 gauge pin is intended for bore verification, fit tests and alignment referencing in production and maintenance tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5mm Gauge Ring Form C Hardened Gauge Steel DIN 2250, JS 3 - Metav IndustryLine
Combine the hardened, lapped gauge steel construction with the DIN 2250 / DIN 286 (JS 3) specification and compact Form C geometry for a dependable reference in small-bore set‑up and inspection; order the setting ring directly via Metav Werkzeuge or consult our specialists for application guidance. Setting ring 3.5 mm — hardened gauge steel, Form C (Metav IndustryLine) The Setting ring 3.5 mm is a precision reference gauge designed for setting and checking small bore diameters in toolmaking and inspection applications. Form C for precise bore positioning Hardened, lapped gauge steel DIN 2250 / DIN 286 — JS 3 tolerance Reliable reference for rapid set-up and repeatability Manufactured from hardened and lapped gauge steel, this compact reference ring provides a stable datum for small-bore adjustments. Compliance with DIN 2250 and DIN 286 under JS 3 ensures a consistent production standard across batches and operators, which reduces rework and shortens machine set‑up times. The ring’s finish and material selection minimise wear and maintain dimensional integrity, so the reference remains trustworthy over repeated use. Compact Form C design for accessible positioning The Form C geometry offers an accessible seating profile for quick mounting in fixtures or on mandrels, combining portability with reliable contact. At a 3.5 mm nominal diameter and a low mass, the component is easy to handle and manoeuvre within tight assemblies, yet sufficiently robust for repeated workshop use. The lapped surface improves repeatability of contact and measurement, supporting efficient quality checks without compromise to handling. Standards, traceability and workshop integration Designed for integration into standard inspection routines, the ring is supplied with clear identification (GTIN and article reference) to support traceability and inventory management. As part of the Metav IndustryLine range, it benefits from distribution through a central European quality filter, enabling smaller workshops to access industrial-grade standards. This combination of conformity, material quality and supply reliability supports a reproducible measurement chain in both manufacturing and maintenance environments. Contact Metav Werkzeuge for tailored application advice or to secure this Metav IndustryLine setting ring — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M313.003.5 GTIN: 4054469120409 Description: Setting ring 3.5 mm, DIN 2250, hardened gauge steel Weight: 0.1 kg Facts Diameter: 3.5 mm Weight: 0.1 kg Tariff number: 90173000 eCl@ss: 21170104 Special features Form C geometry Material: gauge steel, hardened and lapped Standards: DIN 2250 and DIN 286, JS 3 Category: gauges / setting rings FAQ What is the intended use of the setting ring? The setting ring is a precision reference for setting and checking small bore diameters in toolmaking, inspection and fixture set‑up; the Setting ring 3.5 mm is optimised for compact components. Which standards does the ring comply with? The ring conforms to DIN 2250 and DIN 286 with a JS 3 tolerance class, ensuring compatibility with common workshop and inspection requirements. How does the material affect longevity and performance? Hardened, lapped gauge steel provides a wear‑resistant surface and stable contact, so the reference ring retains accuracy through repeated handling and measurement cycles. Is traceability provided for inventory and quality systems? Yes; the Setting ring 3.5 mm is supplied with clear identification (GTIN and article reference) to support traceability within quality and inventory systems. Can this ring be used in fixture set‑up for production machines? The Form C geometry and durable material make the ring suitable as a reference in fixture set‑up and small‑bore positioning tasks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5mm Test Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of workshop-ready precision with a 3.50 mm gauge pin that delivers ±0.001 mm accuracy and a compact 50 mm length; the robust special-steel construction ensures repeatable end-dimension checks and is supplied in a protective transport case. Order directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin M323.350 — precision test pin Ø 3.50 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.350 is a compact precision test pin for reliable end-dimension verification and go/no-go checks in workshop and assembly inspection tasks High-precision ±0.001 mm tolerance Solid special steel construction 50 mm usable length for end-dimension checks Delivered in protective transport case Precise control for small diameters and critical fits A compact test pin in the micro range, this tool is designed for measurements where tight clearances decide assembly quality. The ±0.001 mm tolerance provides a quantifiable basis for acceptance criteria, reducing interpretation between operators and speeding up decision-making in inspection routines. By specifying a defined diameter of 3.50 mm and a measured length of 50 mm, the pin enables direct comparison with nominal end dimensions and supports standardised pass/fail procedures. This clarity in measurement reduces rework and scrap, delivering a measurable improvement in process reliability. Robust workshop design that tolerates daily use Engineered as a workshop version, the pin combines a hardened special-steel body with a finish suited to regular handling and insertion cycles. The selected material resists ordinary wear while keeping the measurement surface stable under repeated use, which preserves dimensional integrity over many inspection cycles. The compact design and low mass make hand manoeuvring straightforward, while the firm edge geometry reduces the risk of jamming when checking hole seats or mating parts. The result is a tool that keeps inspection throughput high without compromising repeatability. Practical handling, transport and storage for the workshop environment Delivered in a protective transport case, the pin is ready for immediate integration into inspection kits and portable measuring sets. The case protects the calibrated diameter and bearing surfaces during storage and transit, so accuracy is maintained from the supplier to the point of use. The small footprint of the pin simplifies organisation in tool drawers and gauge sets, while the ruggedised supply format supports mobile quality checks on the shop floor or next to assembly stations. This practicality shortens setup time and helps workshops maintain consistent measurement routines. Clear benefit: faster, reproducible acceptance decisions By combining a defined diameter, sub-micron-level tolerance and workshop-grade construction, this test pin streamlines routine inspections and gauge checks. The pin is suitable for use in dimensional control, fixture setup and final acceptance checks where the specified end measurements are decisive. Fewer ambiguous results and quicker go/no-go outcomes translate into higher throughput and reduced production bottlenecks, particularly where small-diameter fits are frequent. Request tailored technical advice or a supply proposal from Metav Werkzeuge GmbH for Metav IndustryLine gauge pins—contact +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.350 GTIN: 4061905059100 Manufacturer: Metav IndustryLine Measurements & accuracy Diameter: 3.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Material: special steel Workshop version for regular use Supplied in a protective transport case ECLASS: 21170231 Storytrigger: end-dimension checks FAQ What applications suit this gauge pin? The gauge pin M323.350 is intended for end-dimension verification, go/no-go checks and fixture setup where a 3.50 mm diameter and tight tolerance are required; it is especially useful in workshops and assembly inspection. Is the stated accuracy of ±0.001 mm maintained in daily workshop use? When handled and stored in the supplied protective case and used for comparative checks, the pin maintains its ±0.001 mm accuracy; routine visual inspection of the bearing surfaces is recommended to ensure ongoing repeatability. Can this pin be used for hole checking and assembly clearance testing? Yes—this test pin is suitable for hole-seat verification and basic clearance testing in small-diameter fits, helping to confirm whether mating parts meet the specified end dimensions. What material is the pin made from and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability under repeated insertion cycles; this preserves the measurement surface and supports long-term reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.61mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from industrial‑grade repeatability and compact handling: the combination of ±0.001 mm accuracy, a 3.61 mm nominal diameter and a 50 mm shaft delivers reproducible end‑measurements with minimal setup time. Order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.361 — precision test pin, 3.61 mm, ±0.001 mm The gauge pin M323.361 serves as a compact precision test pin for end‑measurement and inspection tasks in workshop and production environments. Workshop version for industrial use 3.61 mm diameter with ±0.001 mm accuracy 50 mm hardened special‑steel shaft Individual delivery, traceable GTIN 4061905055638 Repeatable inspection with micrometre‑level tolerance A tolerance of ±0.001 mm positions this test pin in the category of ultra‑precise inspection tools for end‑measurements. Such tight accuracy reduces measurement variance and shortens decision cycles in quality control: fewer false rejections, shorter adjustment loops and a measurable improvement in first‑pass yield. The small nominal diameter of 3.61 mm ensures a close fit in bores and gauges where even slight deviations would otherwise require rework. Built for workshop rigour and stable seating Manufactured from special steel, the shaft and tip provide resistance to wear and maintain form under repetitive use. The 50 mm length offers a useful working span while remaining compact enough for fixture mounting or handheld checks; the low mass supports quick handling and minimal deflection. This construction translates into longer service life and more consistent seating in test fixtures, reducing the frequency of re‑measurement and tool replacement. Straightforward integration and traceability in production Marked with GTIN 4061905055638 and supplied as a single item, this precision pin is straightforward to log into inventory systems and to assign to inspection routines. The compact design fits into gauge blocks, inspection plates and dedicated jigs, enabling rapid comparison checks and assembly verifications. With a nominal weight of 0.007 kg, it is easy to manoeuvre during repetitive inspection tasks without operator fatigue. Confidence through certified supply and expertise Sourcing from a dedicated industrial line, this precision pin supports a predictable supply chain and consistent quality checks on the shop floor. Relying on a robust manufacturing partner shortens lead times and reduces uncertainty in procurement; Metav’s position as a precision partner further reinforces availability and service continuity, which is particularly important for serial production and calibration cycles. Contact Metav Werkzeuge for tailored advice on integrating the M323.361 into inspection routines or to request further technical documentation from our specialists Technical data Article number: M323.361 GTIN: 4061905055638 Manufacturer: Metav IndustryLine Facts Diameter: 3.61 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Delivery: single gauge pin Version: Workshop execution ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.361 is specified with an accuracy of ±0.001 mm, suitable for high‑precision end‑measurement tasks in production and inspection. Is the M323.361 suitable for fixture mounting and repeated use? Yes; the special‑steel construction and 50 mm shaft length provide stable seating and wear resistance appropriate for fixture mounting and frequent checks. How is the item supplied and how can it be traced in inventory? The pin is supplied as an individual item and is traceable via GTIN 4061905055638 and article number M323.361 for inventory systems. For which inspection tasks is this test pin typically used? Typical applications include verification of bore diameters, alignment checks in assemblies and reference measurements where micrometre‑level reproducibility is required. Who manufactures this gauge pin? The product is provided under the Metav IndustryLine; further procurement details and technical assistance are available from Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.62mm Gauge Pin, Single, Tolerance ±0.001 mm, Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometric accuracy (±0.001 mm), a compact 3.62 mm diameter and a robust 50 mm length for dependable end‑measurement tasks; the test pin is supplied in a transport‑safe box for secure handling and storage. Order directly from Metav Werkzeuge or request our specialist consultants for integration advice. Precision Gauge Pin M323.362 — 3.62 mm diameter, ±0.001 mm accuracy (50 mm length) the Precision Gauge Pin M323.362 is a single‑piece test pin designed for precise end measurements and dimensional checks in workshop and inspection environments Workshop version, robust execution Diameter 3.62 mm with ±0.001 mm accuracy 50 mm overall length for end measurements Supplied in transport‑safe box Reduce inspection time with micrometric certainty The core advantage of this measuring pin is its ±0.001 mm accuracy, which corresponds to one micron and supports reliable high‑precision checks without repeated remeasuring. When used for end‑position verification or small bore inspection, the reduced measurement uncertainty shortens decision loops in quality control. The fine 3.62 mm diameter enables access to narrow bores and tight features while maintaining a stable contact surface for repeatable results. Built for everyday workshop handling Manufactured in special steel and specified as a workshop execution, the pin tolerates frequent handling and routine use on the shop floor. The 50 mm length provides sufficient reach for many component geometries while keeping the tool compact and easy to seat in holders or chucks. Its lightweight construction contributes to simple manual positioning without excessive stress on fixtures, offering a balance between manoeuvrability and dimensional stability. Easy to integrate into inspection sets and inventory Delivered individually and supplied in a transport‑safe box, this single test pin is straightforward to store, identify and distribute across workstations. Clear labelling with SKU and GTIN supports traceability and inventory control, so the pin can be included in standard inspection kits or assigned to specific measuring stations. The compact format also simplifies replacement planning and reduces downtime when a matched spare is required. Traceability and practical identification for quality systems Each item is identified for straightforward record keeping, enabling documentation within inspection routines and audit trails. The combination of a defined nominal diameter, tight tolerance and an identifiable SKU means the component can be referenced in measurement reports and control plans. For workshops that demand consistent end‑measurement results, this precision pin forms a reliable entry in a metrology toolset. Contact Metav Werkzeuge for precise supplies and expert advice on integrating the M323.362 into production and inspection workflows Technical Data SKU: M323.362 GTIN: 4061905056284 Material: Special steel Version: Workshop execution Supplied: Transport‑safe box Label: Prüfstift, single test pin Facts Diameter: 3.62 mm Length: 50 mm Accuracy / Tolerance: ±0.001 mm Weight: 0.007 kg Special features Designed for end measurements Single‑piece construction Compact format for narrow bores Clear SKU and GTIN for traceability FAQ What accuracy can be expected from this pin? The Metav IndustryLine Precision Gauge Pin M323.362 delivers an accuracy of ±0.001 mm, suitable for micrometric end‑measurement tasks. What are the pin’s core dimensions? Nominal diameter is 3.62 mm and overall length is 50 mm; weight is approximately 0.007 kg. How is the pin supplied and stored? The test pin is supplied individually and packed in a transport‑safe box to protect the measuring face during transit and storage. For which inspection tasks is the pin intended? The pin is designed primarily for end measurements and dimensional checks of narrow bores, small shafts and similar features where a compact, high‑precision contact probe is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.63mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of workshop-ready robustness combined with micrometric accuracy for repeatable end‑dimension checks; the protective transport case preserves the pin in daily use. Order the M323.363 directly via Metav Werkzeuge or consult our specialists for application advice. M323.363 Gauging Pin — 3.63 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.363 gauging pin is a workshop-grade reference pin designed for precise end‑dimension checks, fixture alignment and repeatable inspection tasks in production and quality control environments. Workshop version for robust shop use Diameter 3.63 mm with ±0.001 mm accuracy Length 50 mm for fixture and end‑measure checks Supplied in protective transport case Precision that reduces measurement uncertainty Manufactured for applications where repeatability matters, this reference pin delivers a tolerance of ±0.001 mm, which places it in the high‑precision category for gauging elements. The nominal diameter of 3.63 mm is maintained along the measuring shaft to ensure consistent seating in bores and jigs; the narrow tolerance minimises variation between checks and supports tighter statistical process control. Where small dimensional deviations affect assembly fit or sealing, the micrometric specification of the pin helps transform single readings into reliable inspection data. Durable design for everyday workshop use The component is produced from special steel, balanced for hardness and corrosion resistance in a shop environment, and finished to a smooth contact surface that reduces wear on mating parts. At 50 mm overall length the pin is long enough for many fixture and end‑measure checks while remaining easy to handle. Delivery in a protective transport case preserves the measuring surface during storage and transport, reducing downtime for cleaning or rework and extending useful life under regular use. Integrates with inspection and fixture workflows As a reference element for end‑dimension verification and alignment, the pin fits into standard gauging sets and bespoke fixtures where a compact, precise locating feature is required. Its compact mass and consistent geometry make it suitable for comparative checks, go/no‑go fixtures and as a reference for optical or tactile measurement devices. The simple geometry also supports repeatable placement, which reduces operator‑induced variability and contributes to faster, more reliable quality checks on the shop floor. Confidence through traceable identification and pragmatic partnership The gauging element is identifiable via GTIN and conventional article coding, facilitating stock management and traceability in inspection records. Backed by Metav’s pragmatic approach to precision — a longstanding supply chain based in Emmerich and a broad portfolio of measurement tools — the product supports both small workshops and industrial users seeking dependable, affordable metrology. The combination of robust construction, tight tolerance and protected delivery provides peace of mind in routine production and inspection routines. Consult Metav Werkzeuge for specification matching and secure the M323.363 gauging pin with workshop protection — Metav Werkzeuge in Emmerich provides expert advice and reliable delivery. Technical Data Article number: M323.363 GTIN: 4061905056291 Label: Prüfstift, einzeln, 3,63mm, +/- 0.001 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 3.63 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Version: Workshop execution Delivery: Protective transport case Typical use: End‑dimension checks, fixture alignment, inspection FAQ What tolerance does the gauging pin provide? The M323.363 gauging pin is manufactured to a tolerance of ±0.001 mm, making it suitable for high‑precision reference and inspection tasks. What material is used for this pin? This reference pin is made from special steel designed for shop use and a durable measuring surface. Is a protective case included with the product? Yes, the pin is supplied in a protective transport case to maintain the measuring surface during storage and transit. Can this pin be used for fixture alignment and end‑dimension control? The M323.363 is intended for fixture alignment and end‑dimension verification; its consistent geometry supports repeatable placement in gauging and inspection setups. How is the product identified for inventory and traceability? The item is listed with GTIN 4061905056291 and article number M323.363 for straightforward inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.64mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial ±0.001 mm accuracy, compact 3.64 mm diameter and robust workshop construction for reliable end‑dimension checks. Order the precision test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.364 Precision test pin — 3.64 mm, ±0.001 mm (Metav IndustryLine) The M323.364 precision test pin is a single gauge pin designed for precise end‑measurement and gauging tasks in workshop inspection and fixture set‑ups. *Precision tolerance ±0.001 mm *Diameter 3.64 mm for tight fits *50 mm overall length for stable handling *Workshop‑grade construction in special steel Consistent accuracy for end‑dimension inspection A tight manufacturing tolerance of ±0.001 mm ensures reproducible results when checking bores, plugs and mating parts. The slim 3.64 mm diameter is suited to close‑fit gauges and verification of small holes or plug gauges, while the compact form reduces lever‑action errors during insertion. Built to support repeatable measurement routines, this precision pin helps to shorten inspection cycles and improve process reliability by reducing rework caused by uncertain fits. Durable, workshop‑ready design for everyday use Constructed from Special steel and supplied in a workshop specification, the pin combines wear resistance with handling comfort. At only 50 mm overall length and approx. 0.007 kg weight, it is easy to position in fixtures and to store on inspection benches; the short length also reduces bending moments that can affect accuracy. Supplied in a protective transport case, the pin is protected from damage and contamination during storage and transit, preserving surface quality and dimensional integrity for longer service life. Practical integration into quality workflows The gauge pin is ideal for routine end‑measurements in production control, first‑article inspection and jigs where repeatable plug fit is required. Its compact form factor makes it straightforward to incorporate into manual or semi‑automatic gauging stations, and the clear numerical specification supports traceable documentation in inspection reports. With the recognised SKU and GTIN for inventory management, this test pin suits workshops and inspection labs seeking dependable, easy‑to‑identify measuring artefacts. Order the M323.364 precision test pin from Metav Werkzeuge to secure high‑precision end‑measurements, or contact our technical advisors for application support and product selection Technical data Article number: M323.364 GTIN: 4061905056307 Brand: Metav IndustryLine Description: Precision test pin, single, 3.64 mm, ±0.001 mm, length 50 mm Core technical data Diameter: 3.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Gauge pin / test pin FAQ What is the manufacturing tolerance of this pin? The M323.364 precision test pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑accuracy gauging tasks. Which dimensions define this gauge pin? Diameter is 3.64 mm and overall length is 50 mm; weight is approximately 0.007 kg. Is the pin suitable for workshop use? Yes, the workshop‑grade construction and special steel make the pin robust for regular inspection and fixture use. How is the pin delivered? The gauge pin is supplied in a protective transport case to prevent damage during storage and shipment. Can this pin be used for checking tight‑fit holes? The slim 3.64 mm diameter and tight tolerance make it well suited to verifying close‑fit bores and plug gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.65mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy, robust workshop construction and compact handling for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Test Pin, single, 3.65 mm, ±0.001 mm, 50 mm length — Workshop gauge pin The Test Pin, single, 3.65 mm, ±0.001 mm, 50 mm length is a workshop‑grade gauge pin for precise end‑measure verification and setting tasks in fine mechanical and tooling contexts. Workshop‑grade special steel Diameter 3.65 mm, tolerance ±0.001 mm 50 mm length for end‑measure checks Delivered in transport case for protection Precision that secures repeatable end‑measure results The gauge pin delivers ±0.001 mm tolerance, which corresponds to a one‑micrometre allowance and supports high‑precision verification in quality control. A small nominal diameter of 3.65 mm reduces play in tight fits and ensures consistent contact geometry when measuring bores, gauges or mating parts. Thanks to the fine tolerance, the measuring pin contributes to lower scrap rates and more reliable process capability assessments; the tight tolerance is particularly valuable where dimensional stacks or assembly clearances are critical. Robust workshop construction for everyday handling Manufactured from special steel in a workshop execution, the pin resists everyday wear while retaining measuring geometry. The 50 mm length provides sufficient engagement for end‑measurement and setting operations without excess overhang, aiding stability during manual handling. Delivered in a transport box, the item is protected during storage and transit, preserving calibration state and surface quality. The compact mass and ergonomic form support quick fixture insertion and removal in production environments. Easy integration into inspection routines and tooling As a precision gauge pin, this component is suitable for end‑mass checks, fixture alignment and go/no‑go comparisons in small‑part inspection. Its compact size places it in the micro‑range for fine mechanical work, making it compatible with watchmaking, connector inspection and precision tooling setups. Traceability is supported by the SKU and GTIN, which simplify inventory control and documentation for quality systems; the product is listed as M323.365 for fast identification. The pin’s geometry and workshop durability reduce downtime during routine checks and help maintain consistent measurement results across shifts. Discuss the Test Pin with Metav Werkzeuge to confirm suitability for the application and arrange prompt supply or expert advice from our consultants at Metav Werkzeuge. Technical Data Article number: M323.365 GTIN: 4061905056314 Category: Gauge pin / Measuring pin Facts Diameter: 3.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: Special steel Workshop execution Delivered in transport box Label: Test Pin, single, 3.65 mm, ±0.001 mm, length 50 mm FAQ What level of accuracy does this gauge pin provide? The gauge pin offers a tolerance of ±0.001 mm, giving micrometre‑level accuracy suitable for fine inspection and end‑measure checks with the M323.365 gauge pin. Is the pin suitable for routine workshop use? Yes; the workshop execution and special steel construction make the pin robust enough for everyday handling and repeated insertion in fixtures. Can the gauge pin be used for checking small bores and fittings? The 3.65 mm diameter and tight tolerance make the pin particularly well suited to small bores, connector housings and precision fittings. How is the item delivered and protected? The gauge pin is supplied in a transport case to protect the measuring surface and geometry during storage and transit. How can the product be referenced in procurement or quality records? Use the SKU M323.365 and GTIN 4061905056314 for ordering, inventory and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.66mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of pinpoint measurement and workshop-ready robustness: the combination of diameter 3.66 mm, tolerance ±0.001 mm and a 50 mm length ensures repeatable end‑measurements and smooth integration into inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored advice. Gauge pin, single, 3.66 mm, ±0.001 mm, length 50 mm — Metav IndustryLine precision test pin Gauge pin M323.366 is a single, workshop-grade test pin for end‑measurements and go/no‑go checks in precision assembly and inspection tasks. Workshop execution for everyday shop use Diameter 3.66 mm with ±0.001 mm accuracy Length 50 mm for deeper bore checks Delivered in a transport case Accurate metrology that fits routine inspection The workshop‑optimised construction gives reliable handling for repetitive checks on shafts, bores and end faces. With a diameter of 3.66 mm and a tolerance of ±0.001 mm, this test pin provides a verifiable reference for final dimensions and fits within higher‑precision inspection chains. The small mass (approx. 0.007 kg) and compact geometry reduce the risk of measurement disturbance, while the Special steel composition maintains geometric stability under normal workshop conditions. This makes the component especially useful as an end‑measure master in serial testing and final inspection procedures. Practical benefit: easier workflows and reproducible results The combination of fine tolerance and a 50 mm shaft length enables access into deeper seats and blind bores that standard short pins cannot reach. Supplied in a transport case, the pin remains protected during storage and transit, reducing the risk of surface damage that would otherwise affect measurement integrity. Designed as a single‑piece test pin for manual and semi‑automated inspection tasks, it streamlines go/no‑go checks and documentation routines, enhancing throughput without sacrificing metrological confidence. Built for the shop: durability and clear identification The workshop execution denotes a robust finish suitable for daily industrial use. The choice of Special steel balances wear resistance with the fine surface quality needed for accurate contact measurements. Clear identification by article number M323.366 and GTIN ensures traceability in quality records and stock management. For operations that rely on consistent end measurements, this test pin functions as a stable reference that minimises rework and supports predictable assembly tolerances. Contact Metav Werkzeuge for procurement and specification support for the Metav IndustryLine gauge pin M323.366; our consultants will assist with delivery options and suitability for inspection tasks Technical Data Article number: M323.366 GTIN: 4061905056321 Label: Prüfstift, einzeln, 3,66mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 3.66 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: Special steel Workshop execution Delivered in transport case Intended use: end measurements / reference pin Category: Gauge pin FAQ What materials is this gauge pin made from? The gauge pin M323.366 is manufactured from Special steel, selected for dimensional stability and wear resistance suitable for workshop inspection tasks. Is the 3.66 mm diameter guaranteed for interchangeability? Yes; the ±0.001 mm tolerance ensures the diameter meets tight interchangeability requirements for precise fit checks and end‑measurement comparisons. Can this pin be used for blind‑bore depth checks? The 50 mm shaft length is designed to reach into deeper recesses and blind bores for reliable end‑measurement verification during assembly and inspection. How is the gauge pin supplied for transport and storage? The test pin is supplied in a protective transport case, which helps preserve the measuring surface and maintain accuracy over repeated handling. Which article number should be referenced for ordering or documentation? Please reference article number M323.366 and GTIN 4061905056321 when ordering or recording the gauge pin in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.67mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level accuracy, a robust workshop design and a protective transport case for reliable end‑measurement work. Order the precision gauge pin directly from Metav Werkzeuge or ask the consultants for application support. M323.367 gauge pin — 3.67 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.367 gauge pin is a single precision gage pin designed for accurate end‑measurements and workshop use, offering a tight tolerance and a durable construction for routine inspection tasks. Workshop version for daily use Diameter 3.67 mm, tolerance ±0.001 mm Length 50 mm for end‑measurements Delivered in a protective transport case Micron‑grade accuracy for consistent quality control The heart of this tool is its ±0.001 mm tolerance, which corresponds to about 1 µm of deviation. Such accuracy makes the pin suitable for fine inspection tasks where repeatability is critical. Manufactured for measurement and comparative gauging, this gage pin provides a defined reference surface that reduces uncertainty in go/no‑go checks and pass/fail jigs. The tight tolerance is particularly valuable when measuring end faces, bores or seating surfaces where a consistent datum is required. Robust workshop design that endures daily handling Built as a workshop version, the pin balances precision with resilience. The body is made from special steel, chosen for its wear resistance and dimensional stability under normal workshop conditions. The modest mass facilitates quick handling—the item is compact yet stable in jigs and holders. For transport and protection, the pin is supplied in a protective case, reducing the risk of nicks and preserving the calibrated surface until use. These features combine to keep inspection throughput high while limiting replacement and rework costs. Easy integration into inspection routines and fixtures This single‑piece gage pin is intended for straightforward integration: it fits standard pin mounts, comparator fixtures and custom gauges used in machine shops or assembly lines. The 50 mm length gives adequate engagement for many end‑measurement tasks without adding unnecessary overhang, allowing ergonomic handling during repeated checks. As a defined measurement standard, the pin supports traceable quality control procedures and can be incorporated into batch acceptance tests or spot checks on production runs to prevent out‑of‑tolerance parts from progressing. Practical handling advice to preserve accuracy To maintain the pin’s performance, store it in its protective case when not in use and avoid contact with abrasive surfaces. Small dimensional changes can arise from mechanical damage rather than material instability; the special steel construction mitigates this risk but does not eliminate it. Gentle cleaning after use and careful placement in a fixture will extend service life and preserve the ±0.001 mm specification over many inspection cycles. When precision is required, pair the pin with calibrated measuring devices or gauge blocks to form a stable reference assembly. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine M323.367 gauge pin in specific inspection setups and to confirm availability through our Emmerich quality hub Technical data Article number: M323.367 GTIN: 4061905056338 Manufacturer: Metav IndustryLine Version: Workshop execution Delivery: Protective transport case Measurements & accuracy Diameter: 3.67 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Features & applications Single precision gauge pin Material: Special steel Designed for end‑measurements Supplied individually for inspection use FAQ What level of accuracy can be expected from this gauge pin? The M323.367 gauge pin is manufactured to a tolerance of ±0.001 mm, providing micron‑level accuracy suitable for precise end‑measurement applications and repeatable inspection routines. Is the M323.367 suitable for everyday workshop use? Yes. The workshop execution and the choice of special steel make the M323.367 robust enough for routine checks while maintaining its dimensional stability for quality control. How should the gauge pin be stored to keep its accuracy? Store the pin in its protective transport case when not in use and avoid contact with hard or abrasive surfaces; gentle cleaning and careful handling preserve the ±0.001 mm specification. Can the pin be used in custom jigs and fixtures? The M323.367 gauge pin is intended for integration into standard mounts and bespoke fixtures for comparative or go/no‑go testing; its 50 mm length provides secure engagement in many setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.68mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Compact workshop-grade test pin combining micrometre-level accuracy and robust special steel construction; ideal for end‑measure checks and fixture verification with a tolerance of ±0.001 mm. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Test pin M323.368 — 3.68 mm, ±0.001 mm, 50 mm length The Test pin M323.368 is a workshop‑grade precision gauge pin for end‑measure verification and fixture checking in inspection and production environments. Workshop version for robust daily use Diameter 3.68 mm with ±0.001 mm tolerance 50 mm overall length for fixture checks Precise tolerance for reliable end‑measure results The extremely fine ±0.001 mm tolerance places this gauge pin in the category of high‑precision inspection tools suitable for critical dimensional checks. In practice, that degree of accuracy reduces uncertainty in acceptance testing and shortens rework cycles because deviations at the micrometre scale are detected reliably. The 3.68 mm diameter is especially useful for small bores, pins and reference features where repeatable contact geometry is required; the measurement certainty enhances process control in serial production and quality assurance. Durable workshop design that stays accurate Manufactured from special steel, the pin is designed for repeated contact in workshop environments where surface wear and handling occur daily. The material choice balances hardness and corrosion resistance to maintain the contact geometry over long inspection runs. With a 50 mm overall length the pin offers sufficient reach for a wide range of fixture and component checks while remaining compact enough for handheld gauging or use within gauging fixtures. The workshop execution ensures the tool withstands practical use without compromising the small tolerance class. Integrates smoothly into inspection routines and tooling Marked as a precision gauge under the Metav IndustryLine range, M323.368 complements standard inspection equipment and bench gauges. The compact form factor and close tolerance make it suitable as a reference pin for end‑measure verification, alignment tasks and comparative checks in assembly jigs. Traceable identification (SKU M323.368, GTIN 4061905056345) simplifies inventory and process documentation. Confidence in measurement leads to fewer stoppages and a steadier production flow, backed by Metav’s emphasis on accessible, reliable precision. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine test pin M323.368 fits into existing inspection setups or to request a tailored quotation Technical data Article number: M323.368 GTIN: 4061905056345 Brand: Metav IndustryLine Facts Diameter: 3.68 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Design & features Material: special steel Version: workshop execution Category: gauge pin Accuracy class: high‑precision inspection FAQ What is the intended use of this gauge pin? The M323.368 gauge pin is intended for end‑measure verification, fixture checks and dimensional reference tasks in inspection and production contexts. Is the diameter tolerance suitable for small‑bore inspection? Yes, the ±0.001 mm tolerance on the 3.68 mm diameter meets high‑precision requirements for small‑bore and pin checks. Which material is used and why does it matter? The pin is made from special steel, chosen to combine wear resistance with dimensional stability for frequent workshop use. Can this pin be used in gauging fixtures and jigs? The 50 mm length and workshop execution make the pin suitable for integration into fixtures and comparative gauging setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.69mm Test Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of ultra‑fine tolerance and workshop‑grade construction to keep inspection routines efficient and reproducible. Order the M323.369 directly via Metav Werkzeuge or ask our consultants for tailored application advice. M323.369 gauge pin (single) – 3.69 mm, ±0.001 mm, 50 mm length – Metav IndustryLine The M323.369 gauge pin is a single workshop‑grade test pin designed for precise end‑measure verification and small‑diameter dimensional checks in machining and quality control settings. Workshop-grade execution Diameter 3.69 mm with ±0.001 mm tolerance 50 mm special-steel body Single gauge pin for end-measure checks Assured accuracy for fine inspection tasks High measurement confidence starts with repeatable components. This gauge pin delivers an exceptionally tight ±0.001 mm tolerance on a nominal 3.69 mm diameter, which significantly reduces uncertainty when verifying bore diameters, plug fits or end‑measure references. The fine tolerance means fewer follow‑up checks and lower scrap rates, translating into measurable time savings during repeated inspection cycles. As an inherently simple mechanical reference, the pin provides a robust baseline for go/no‑go assessments and comparative checks in small‑part production. Robust build for workshop environments A component that withstands daily use avoids frequent replacement and downtime. Manufactured from special steel and presented in a workshop‑grade execution, the pin is engineered for routine handling and repeated insertion into fixtures and jigs. Its 50 mm shank length offers comfortable engagement for manual operation while keeping mass low (approx. 0.007 kg), which helps protect delicate assemblies during measurement. The straightforward, hardened geometry supports reliable seating in gauges and comparison fixtures without elaborate handling or special tooling. Integrates easily into inspection workflows This single gauge pin is suited to fast, pragmatic quality checks rather than elaborate metrology setups. Its compact form factor allows rapid interchange with other reference pins or insertion into test rigs, speeding up batch sampling and first‑article inspections. Markings such as the SKU and GTIN enable simple inventory control and traceability: use the pin as a portable reference for bench checks, bench comparators, or manual go/no‑go tests to keep throughput steady and documentation consistent. Clear identification and single‑unit supply Each item is supplied individually and is easily identified for stock and inspection records. The product is listed under the Metav IndustryLine range and carries the SKU M323.369 together with GTIN 4061905056352 for unambiguous ordering and traceability. For processes that depend on a clear audit trail and repeatable mechanical references, a single, well‑specified gauge pin such as this reduces ambiguity and simplifies documentation in quality systems. Contact Metav Werkzeuge for expert advice on integrating the Metav IndustryLine M323.369 gauge pin into your inspection routines and to arrange supply tailored to workshop requirements Technical Data Article number: M323.369 GTIN: 4061905056352 Label: Gauge pin, single, 3.69 mm, ±0.001 mm, length 50 mm Facts Diameter: 3.69 mm Accuracy: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: special steel Workshop execution Supplied as single unit Category: gauge pins FAQ What is the primary application of this gauge pin? The M323.369 gauge pin is intended for precise end‑measure checks, plug‑fit testing and quick go/no‑go assessments in machining and quality control. Can this pin be used as a reference in workshop comparators? Yes, the single gauge pin from Metav IndustryLine is suitable as a portable reference in manual comparators and for repeatable bench checks. How is the product identified for ordering and stock? The gauge pin is listed under SKU M323.369 and GTIN 4061905056352, facilitating clear ordering and inventory management. What material is the pin made from and how does that benefit use? The pin is made from special steel, offering durability for repeated insertion and handling in workshop routines, which helps maintain dimensional stability. Is the tolerance of ±0.001 mm typical for workshop pins? The ±0.001 mm tolerance of this gauge pin places it among very high‑precision mechanical references suitable for demanding small‑component inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com