VNMG 120412 AH8015 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade (AH8015) and the ISO VNMG geometry delivers reliable edge stability and wear resistance for turning heat-resistant alloys; the precise 1.2 mm corner radius and 35° approach angle support consistent surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. VNMG120412E-PM AH8015 VNMG 120412 AH8015 — Indexable turning insert for turning, Tungaloy The VNMG120412E-PM AH8015 is an ISO rhombic indexable insert designed for external and internal turning of heat-resistant alloys, offering a balanced combination of wear resistance and cutting-edge stability. PVD-coated AH8015 for heat-resistant alloys ISO VNMG geometry for secure clamping 1.2 mm corner radius for accurate profile Cylindrical hole; 4.76 mm plate thickness Increased process reliability and longer tool life The PVD-coated AH8015 carbide grade provides a measured compromise between wear resistance and cutting-edge stability, which reduces unscheduled tool changes in continuous production. With the PM chipbreaker geometry, chip formation is controlled when machining tougher, heat-resistant alloys; this lowers the risk of built-up edge and supports a steadier surface finish. The combination of the 1.2 mm corner radius and the 35° approach angle helps distribute cutting forces and maintain a consistent contact zone, translating into predictable performance across runs. Seamless integration into ISO turning systems Compatibility is governed by insert form, relief angle, tolerance class, fastening and dimensional fit; the rhombic ISO VNMG shape and standard hole style ensure straightforward mounting in widely available holders. The insert forms part of a system comprising the indexable insert, a matching external holder or boring bar, a shim or clamp set and replacement screws. Selecting the correct holder geometry and tolerance class ensures repeatable seating and avoids vibration, so productivity benefits from reduced setup time and uniform component quality. Practical selection advice for material-specific machining For turning heat-resistant alloys, the AH8015 grade is a first-choice option where a balance between edge life and toughness is required. Choose the PM chipbreaker when moderate feeds and reliable chip control are priorities; for heavier interruptions or unstable setups, consider chipbreakers and grades that prioritise edge strength. The PVD coating improves temperature resistance at the cutting zone, while the carbide substrate provides the core support for edge integrity. When uncertain about the best combination for a specific alloy or stability condition, match the insert’s geometry and grade to the clamping rigidity and cutting data of the machine. For tailored application advice or to secure the Tungaloy VNMG120412E-PM AH8015 for robust turning operations, contact Metav Werkzeuge—eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6966340 Manufacturer article number: 6966340 Manufacturer SKU: TUN6966340 SKU: 6966340-Tungaloy Model series: ISO turning indexable inserts Designation: VNMG120412E-PM AH8015 Core specifications Corner radius: 1.2 mm Plate thickness: 4.76 mm Size: 12 mm Clearance (relief) angle: 0° Approach angle: 35° Hole style: cylindrical hole Chipbreaker: PM Grade: AH8015 Materials & special features Material: carbide (Hartmetall) Coating: PVD Plate form: rhombic Application: turning (external and internal) Suitable for: heat-resistant alloys System requirements: matching holder, shim/clamp set and screws FAQ What materials is this insert designed for? The VNMG120412E-PM AH8015 is specified for machining heat-resistant alloys; the AH8015 PVD-coated carbide grade balances wear resistance and edge stability for such materials. How does the PM chipbreaker affect chip formation? The PM chipbreaker promotes controlled chip formation under typical turning feeds, improving evacuation and reducing the likelihood of chip entanglement during processing. Is the insert compatible with standard VNMG holders? Yes — the ISO VNMG geometry, cylindrical hole and standard dimensions make the insert compatible with holders designed for ISO VNMG inserts, provided the holder matches form, size, thickness and tolerance class. What does the 0° clearance angle mean in practice? A 0° relief indicates the nominal relief geometry for this insert series; ensure holder and setup accommodate this specification for correct seating and cutting geometry. Can the PVD coating withstand high cutting temperatures? The PVD coating on the AH8015 grade increases resistance to thermal wear and is intended to improve performance when machining heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120412 T6215 Wendeplatten - Tungaloy
VNMG 120412 T6215 Drehwendeschneidplatte zum Drehen — Tungaloy Die VNMG120412E-ZM T6215 ist eine ISO-genormte rhombische Drehwendeschneidplatte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen ISO-genormt, rhombische Form CVD-beschichtetes Hartmetall Geeignet für rostfreien Stahl Eckenradius 1,2 mm für präzise Konturen Mit zylindrischem Loch und 0° Freiwinkel Wirtschaftliche Präzision für Serienprozesse Die VNMG120412E-ZM T6215 kombiniert CVD-Beschichtung und verschleißfesten Hartmetall zu einer Sorte, die speziell auf die Anforderungen beim Drehen von rostfreiem Stahl abgestimmt ist. Durch die optimierte Schneidkante und den stabilen Spanformer wird die Standzeit erhöht und die Rüstzeit reduziert, was sich direkt in geringeren Stückkosten und höherer Produktivität niederschlägt. Besonders in Serien- und Chargenfertigungen sorgt die Plattenkonstruktion für konstante Ergebnisse und reproduzierbare Oberflächenqualität. Materialeigenschaften und Beschichtungsnutzen Das verwendete Hartmetall bietet hohe Wärme- und Druckfestigkeit, die CVD-Beschichtung verbessert die Verschleißfestigkeit und reduziert das Anbacken bei hohen Schnittbedingungen. CVD steht für chemical vapor deposition und beschreibt ein Schichtverfahren, das eine harte, homogene Beschichtung erzeugt; dadurch bleibt die Schneidkante länger scharf und die Oberflächengüte stabil. Anwender profitieren von weniger Nachbearbeitung und längeren Intervalen zwischen Plattenwechseln. Passender Einsatz und Empfehlung zur Anwendung Die Platte ist ausgelegt für Außen- und Innendrehen; der Spanbrecher ZM sollte im Kontext des Werkstoffs, der Bearbeitungsart und der Maschinenstabilität gewählt werden. Für stabile Zerspanungsbedingungen und leicht unterbrochene Schnitte liefert die Sorte T6215 besonders zuverlässige Ergebnisse. Empfohlen für Lohnfertiger und Produktionsbetriebe, die rostfreien Stahl bearbeiten und auf Prozesssicherheit sowie konstante Werkzeugstandzeit Wert legen. Integration in den Werkzeugaufbau Die Funktionalität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte; daher ist die Auswahl des passenden Außenhalters oder der passenden Bohrstange entscheidend. Mit einer Plattendicke von 4,76 mm und einem Eckenradius von 1,2 mm fügt sich die Platte in Standardhalter ein, die für ISO-Drehwendeschneidplatten ausgelegt sind. Der zylindrische Lochaufbau gewährleistet einfache Montage mit Unterlage und Klemmsatz sowie Austausch mit Ersatzschrauben. Empfehlung: Für produktive Bearbeitung von rostfreiem Stahl die Tungaloy T6215 einsetzen; bei Fragen zur passenden Trägergeometrie oder zur Prozessoptimierung Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 in Anspruch nehmen Produktmerkmale Artikelnummer: 6944978 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120412E-ZM T6215 Hersteller SKU: TUN6944978 Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T6215 Spanbrecher: ZM Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Einsatz: Drehen ISO-genormt FAQ Für welche Werkstoffe eignet sich die VNMG120412E-ZM T6215 am besten? Die VNMG120412E-ZM T6215 von Tungaloy wurde speziell für das Drehen von rostfreiem Stahl entwickelt; durch die verschleißfeste CVD-Beschichtung und den stabilen Spanformer eignet sich die Platte für stabile bis leicht unterbrochene Schnittbedingungen. Welchen Eckenradius hat die Platte und wofür ist dieser nützlich? Die Platte besitzt einen Eckenradius von 1,2 mm, der präzise Konturen ermöglicht und gleichzeitig die Belastung an der Schneidkante reduziert, was die Standzeit im Dauerbetrieb verbessert. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die VNMG120412E-ZM T6215 ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse und Befestigung des Halters ab, daher sollten Halter parametrisch auf die genannte Plattendicke und Lochausführung abgestimmt werden. Welche Vorteile bietet die CVD-Beschichtung der Sorte T6215? Die CVD-Beschichtung erhöht die Verschleißfestigkeit und Widerstandsfähigkeit gegen thermische Beanspruchung, reduziert Anbackungen und sorgt für eine stabilere Schneidkante bei der Bearbeitung von rostfreiem Stahl. Woran erkennt man den geeigneten Spanbrecher für meine Anwendung? Der Spanbrecher ZM ist in Kombination mit der Sorte T6215 für ausgewogene Spanformung konzipiert; die Wahl sollte auf Basis des Werkstoffs, der Schnittbedingungen und der Maschinenstabilität getroffen werden. Bei Unsicherheit empfiehlt sich eine Abstimmung mit der technischen Beratung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120412 T6215 Wendeplatten - Tungaloy
VNMG120412E-TM T6215 Wendeplatte zum Drehen | Tungaloy VNMG120412E-TM T6215 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen, speziell geeignet für die Bearbeitung von rostfreiem Stahl CVD-beschichtetes Hartmetall für lange Standzeit Speziell ausgelegt für rostfreien Stahl unter stabilen Bedingungen Rhombische Platte mit 35° Winkel für vielseitige Einsatzmöglichkeiten Mit zylindrischem Loch für einfache Befestigung Eckenradius 1,2 mm für universelle Schneidkantenbelastung Hohe Standzeit durch CVD-Beschichtung und robusten Schneidstoff Die VNMG120412E-TM T6215 besticht durch den Einsatz von CVD-beschichtetem Hartmetall, das in Kombination mit einer gezielt entwickelten Sorte T6215 auf verschleißarme Zerspanung optimiert ist. Diese Material- und Beschichtungswahl reduziert den Verschleiß an der Schneidkante und sorgt für eine konstante Prozesssicherheit bei länger laufenden Serien. Anwender profitieren von geringeren Rüst- und Ausfallzeiten sowie planbarer Werkzeugstandzeit. Präzise Spanbildung und gezielte Anwendung für rostfreie Werkstoffe Für das Drehen von rostfreiem Stahl liefert die Platte durch den Spanbrecher TM eine kontrollierte Spanform, die Spankontrolle und Oberflächengüte verbessert. Die Kombination aus Eckenradius 1,2 mm und Freiwinkel 0° ermöglicht stabile Schnitte bei moderater bis hoher Zerspanungsstabilität. Dadurch eignen sich die Platten besonders für Bauteile, bei denen Maßhaltigkeit und Oberflächenqualität entscheidend sind. ISO-Kompatibilität und Einbindung in modulare Schneidwerkzeugsysteme Die Platte entspricht der ISO-Drehwendeschneidplatten-Norm und ist in Form, Größe (12 mm), Dicke (4,76 mm) und Befestigungsbild universell in ISO-Außenhaltern und Bohrstangen einsetzbar. Der zylindrische Lochaufbau gewährleistet sicheren Sitz und unkomplizierten Wechsel im Produktionsalltag. Anwender können so bestehende Werkzeugaufnahmen weiter nutzen und Werkzeugbestände standardisiert betreiben. Anwendungsprofil und Zielgruppe Entwickelt für Drehereien, Lohnfertiger und Serienproduktionen, richtet sich die VNMG120412E-TM T6215 an Anwender, die eine wirtschaftliche, wiederholgenaue Lösung für rostfreien Stahl suchen. Die Platte ist prädestiniert für stabile Schnittbedingungen und leicht unterbrochene Schnitte; bei sehr instabilen Bedingungen sollten passenden Halter und Schnittparameter geprüft werden. Technische Beratung unterstützt bei der Auswahl des idealen Spanbrechers und der Schnittdaten. Für Prozesssicherheit und lange Standzeiten empfiehlt sich die Tungaloy VNMG120412E-TM T6215; Technische Beratung und Bestellung über Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: 6944972 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Herstellers SKU: TUN6944972 Bezeichnung: VNMG120412E-TM T6215 Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T6215 Spanbrecher: TM Form: Rhombisch Freiwinkel: 0° Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen Einsatzgebiet: Bearbeitung von rostfreiem Stahl FAQ Welche Werkstoffe eignet die VNMG120412E-TM T6215 besonders gut? Die VNMG120412E-TM T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt und liefert unter stabilen Schnittbedingungen hohe Standzeiten und gute Oberflächengüten. Wie wird die Platte im Halter fixiert? Die Platte verfügt über ein zylindrisches Loch und ist damit kompatibel zu gängigen ISO-Außenhaltern und Bohrstangen; die Befestigung erfolgt mit Unterlage/Klemmsatz und Schraube entsprechend ISO-Norm. Welche Vorteile bringt die CVD-Beschichtung der Sorte T6215? Die CVD-Beschichtung erhöht die Verschleißfestigkeit und sorgt für konstante Schneidkantenstabilität, was zu längeren Werkzeugstandzeiten und planbaren Produktionsläufen führt. Für welche Schnittbedingungen ist der Spanbrecher TM geeignet? Der Spanbrecher TM bietet kontrollierte Spanform und eignet sich besonders bei stabilen bis leicht unterbrochenen Schnitten; er verbessert die Spanförderung und die Oberflächenqualität. Ist die VNMG120412E-TM T6215 für Innen- und Außenbearbeitung geeignet? Ja, die ISO-geometrie und der Eckenradius machen die Platte sowohl für Außen- als auch für Innendrehoperationen einsetzbar, sofern Halter und Werkzeugaufnahme entsprechend abgestimmt sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120412 T9215 Wendeplatten - Tungaloy
VNMG120412E-PM T9215 ISO-Drehwendeschneidplatten zum Drehen von Tungaloy VNMG120412E-PM T9215 verbindet CVD-beschichtetes Hartmetall mit robuster Geometrie für produktive Außen- und Innendrehprozesse VNMG-Form: ISO-genormt für präzise Passung CVD-beschichtetes Hartmetall Sorte T9215 Eckenradius 1,2 mm für kontrollierten Spanbruch Freiwinkel 0° und Winkel 35° für stabile Schneidkante Rhombische Platte mit zylindrischem Loch Höhere Produktivität bei mittleren Stahl-Schnittbedingungen Für den Einsatz im Drehen bietet die VNMG120412E-PM T9215 eine ausgeglichene Kombination aus Verschleißfestigkeit und Zähigkeit. Die Sorte T9215 ist speziell für die mittlere Stahlbearbeitung entwickelt und erlaubt konstante Schnittdaten bei kontinuierlichem bis leicht unterbrochenem Schnitt. Der Einsatz dieser Wendeschneidplatte führt zu weniger Ausfallzeiten durch längere Standzeiten und konsistente Ergebnisse bei Serienfertigung. Material und Beschichtung sorgen für Prozesssicherheit Die Wendeschneidplatte besteht aus Hartmetall mit einer CVD-Beschichtung, die erhöhten Verschleißwiderstand liefert, ohne die Bruchsicherheit zu verschenken. Die Beschichtung T9215 sorgt für bessere Temperaturbeständigkeit und stabilere Schneidkante, wodurch Oberflächenqualität und Werkzeugstandzeit im Fertigungsalltag verbessert werden. Das erklärt, warum diese Sorte häufig bei produktionsorientierten Drehaufgaben gewählt wird. Passgenauigkeit, Einbau und Anwendungshinweise Die ISO-Genormung garantiert die Kompatibilität zur Halterung, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen. Die Platte hat eine Plattendicke von 4,76 mm und eine Plattengröße von 12 mm; das zylindrische Loch erleichtert die sichere Befestigung. Beim Einrichten empfiehlt sich die Auswahl eines passenden Spanbrechers PM und die Anpassung der Schnittwerte an Maschine und Werkstücksteifigkeit, um die Vorteile der Geometrie vollständig zu nutzen. Für wen sich diese Wendeschneidplatte eignet Entwickelt für Fertiger und Lohnbearbeiter, die hohe Produktivität mit zuverlässiger Standzeit verbinden möchten, eignet sich dieses Werkzeug besonders für Anwender in der Stahlbearbeitung. Die Kombination aus Eckenradius 1,2 mm und der stabilen rhombischen Form unterstützt saubere Spanbildung und gleichbleibende Toleranzen, sodass sich Prozesse wirtschaftlich skalieren lassen. Empfehlung: Für eine effiziente Stahlbearbeitung die VNMG120412E-PM T9215 von Tungaloy anfragen und technische Beratung bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen. Technische Daten Artikelnummer: 6966335 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120412E-PM Daten Plattendicke: 4,76 mm Plattengröße: 12 mm Eckenradius: 1,2 mm Freiwinkel: 0° Winkel: 35° Hersteller-SKU: TUN6966335 Besonderheiten Material: Hartmetall Beschichtung: T9215 (CVD) Spanbrecher: PM Plattenform: Rhombisch Loch: mit zylindrischem Loch Einsatz: Außen- und Innendrehen Anwendung: mittlere Stahlbearbeitung FAQ Was bedeutet die Bezeichnung VNMG120412E-PM? Die Bezeichnung steht für die ISO-geometrie VNMG mit der ISO-Kennung 120412, Eckenradius 1,2 mm und dem Spanbrecher PM; die Sorte ist T9215 und die Platte passt in entsprechende Halter für das Drehen. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die VNMG120412E-PM T9215 ist primär für die mittlere Stahlbearbeitung ausgelegt; die CVD-Beschichtung verbessert Verschleißfestigkeit und Wärmebeständigkeit bei typischen Stahl-Schnittparametern. Kann die Platte bei unterbrochenem Schnitt eingesetzt werden? Ja, die Sorte T9215 kombiniert Bruchsicherheit mit Verschleißwiderstand und eignet sich für kontinuierlichen bis leicht unterbrochenen Schnitt, sofern Halter und Setup ausreichend stabil sind. Wie beeinflusst der Eckenradius von 1,2 mm die Bearbeitung? Der Eckenradius 1,2 mm liefert einen guten Kompromiss zwischen Schnittfestigkeit und Oberflächenqualität; er reduziert Kerbwirkung und fördert eine gleichmäßige Spanbildung. Welche Angaben helfen bei der Auswahl des passenden Halters? Maßgeblich sind Form, Freiwinkel, Toleranzklasse, Befestigung, Plattengröße und Plattendicke; für diese Platte sind relevante Werte: Plattengröße 12 mm, Plattendicke 4,76 mm, Freiwinkel 0°. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120412 T9215 ZM Wendeplatten - Tungaloy
Take advantage of a high-productivity, wear-resistant insert that balances CVD-coated carbide longevity with fracture resistance for dependable turning in medium steel; specify the matching holder and chipbreaker for optimal chip control and order directly via Metav Werkzeuge or request application advice from their consultants. VNMG120412E-ZM T9215 VNMG ISO turning insert — CVD-coated carbide, 1.2 mm radius, 35° A VNMG120412E-ZM T9215 indexable turning insert engineered for efficient outer and inner turning of medium steels, combining a ZM chipbreaker with CVD-coated carbide for continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Optimised ZM chipbreaker for steel Rhombic VNMG form, 35° cutting angle 1.2 mm corner radius, 4.76 mm thickness Achieve consistent productivity with a robust cutting grade The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T9215 is designed to extend the service intervals while maintaining fracture toughness under typical production conditions. This results in fewer tool changes and reduced process downtime during continuous and lightly interrupted cuts. For workshops focusing on medium-steel turning, the investment in a high-performance grade delivers measurable gains in cycle-time stability and repeatability. The coating reduces flank and crater wear, while the substrate resists chipping, so component quality and tool life are both improved. Predictable chip control and precise geometry for clean finishes The ZM chipbreaker is optimised for steel machining and promotes controlled chip formation to improve machining reliability and surface quality. The insert’s rhombic geometry with a 35° main cutting angle and a 1.2 mm corner radius provides a balance between strength and form accuracy, enabling consistent profile control. A 0° relief angle and a plate thickness of 4.76 mm give secure seating in rigid holders, reducing vibration and improving surface finish. Compatibility with ISO-standard holders is determined by form, relief angle, tolerance class, fixation method, size and thickness — the insert is intended for use with an appropriate external holder or boring bar, plus backing pad and clamping set for secure assembly. Durable performance and application guidance for production use The tool grade pairs high wear resistance with sufficient toughness, making it suitable for a broad range of medium-steel applications where productivity and repeatable part quality are priorities. The ZM chipbreaker assists in preventing long, stringy chips and contributes to easier handling and safer machining. Selection of chipbreaker and grade should be matched to workpiece material, cutting parameters and assembly rigidity to exploit the insert’s full potential. For complex set-ups or alternating workpiece batches, refer to technical data and machining charts to adapt feeds and speeds; application-specific recommendations help to safeguard tool life and achieve the targeted surface integrity. For reliable, high-productivity steel turning using Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored application advice and availability. Technical data Article number: 6797201 Manufacturer SKU: TUN6797201 Supplier SKU: 6797201-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Key dimensions Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 35° Relief angle: 0° ISO designation: 120412 Design & features CVD-coated cemented carbide grade T9215 ZM chipbreaker optimised for steel Rhombic plate form (VNMG) With cylindrical hole for secure locating Compatible with ISO holders; system includes holder, backing pad/clamping set and screws FAQ What materials is this insert intended for? The Tungaloy VNMG120412E-ZM T9215 is primarily intended for medium steel machining, where its CVD-coated carbide grade provides a balance of wear resistance and toughness. How does the ZM chipbreaker influence machining? The ZM chipbreaker promotes short, controllable chips in steel turning, improving chip evacuation and contributing to a better surface finish and safer operation. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions; compatibility depends on matching the insert form, relief angle, tolerance class, fixation, size and thickness to the chosen holder. What cutting conditions suit this grade best? The T9215 grade is effective for continuous and lightly interrupted cuts in medium steel; feeds and speeds should be selected based on component geometry and machine stability. Which features improve productivity in production shops? The combination of CVD coating, wear-resistant carbide, and the ZM chipbreaker reduces tool changes and improves process stability, delivering consistent productivity in production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120412 T9225 Wendeplatten - Tungaloy
VNMG 120412 T9225 Wendeplatte zum Drehen von Tungaloy Die VNMG120412E-TM T9225 von Tungaloy ist eine ISO-genormte rhombische Drehwendeschneidplatte für das Außen- und Innendrehen, ausgelegt für mittlere bis schwere Stahlbearbeitung. Universalsorte T9225 für mittlere bis schwere Stahlbearbeitung CVD-Beschichtung für hohe Verschleißfestigkeit Eckenradius 1,2 mm für stabile Schnittbedingungen Rhombische Form, Plattendicke 4,76 mm, mit zylindrischem Loch Spanbrecher TM für kontrollierte Spanbildung Materialstärke und Beschichtung sichern Standzeit Die Platte besteht aus Hartmetall mit CVD-Beschichtung, wodurch Verschleißfestigkeit und Lebensdauer deutlich erhöht werden. Durch die Kombination aus zäher Schneidstoffmatrix und harter Beschichtung bleibt die Schneidkante länger stabil, was die Standzeit bei wechselnden Eingriffsbedingungen verbessert. Das Resultat ist weniger Maschinenstillstand und höhere Produktivität bei anspruchsvoller Stahlzerspanung. Präzision durch genormte Abmessungen und Form Dank ISO-Genormung sorgt die Platte für klare Kompatibilität mit passenden Außenhaltern und Bohrstangen; entscheidend sind Form, Freiwinkel, Toleranzklasse und Dicke. Der Freiwinkel von 0° und der Winkel von 35° ermöglichen reproduzierbare Schnittgeometrien, die in Serienprozessen zu konstanter Oberflächengüte führen. Das rhombische Plattendesign bietet zudem flexiblen Einsatz bei Innen- und Außenbearbeitung. Einsatzvorteile bei wechselnden Schnittbedingungen Die Sorte T9225 ist als robuste Universalsorte ausgelegt und bietet eine gute Balance aus Zähigkeit und Verschleißfestigkeit. In Situationen mit leicht unterbrochenem Schnitt oder variabler Stabilität sorgt die Sorte für gleichbleibende Bearbeitungsergebnisse. Der Spanbrecher TM unterstützt eine kontrollierte Spanform und reduziert so Vibrationen sowie Werkzeugbelastung. Einbauregeln und Anwendungshinweise Beim Einbau ist auf korrekte Unterlage, Klemmsatz und Ersatzschrauben zu achten, um Wiederholgenauigkeit zu gewährleisten. Die Kompatibilität der VNMG120412E-TM T9225 mit dem Halter richtet sich nach Plattengröße, Plattendicke und Lochausführung; das zylindrische Loch ermöglicht sichere Befestigung und einfache Wiederholbarkeit beim Wechseln der Wendeschneidplatte. Für optimale Ergebnisse passende Schnittdaten und Kühlung wählen. Empfehlung: Die VNMG120412E-TM T9225 von Tungaloy für produktive und prozesssichere Stahlzerspanung einsetzen; weitere technische Beratung und Bestellung über Metav Werkzeuge, per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6797204 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Artikelbezeichnung: VNMG120412E-TM T9225 Hersteller-SKU: TUN6797204 Daten Eckenradius: 1,2 mm Freiwinkel: 0° Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 12 mm Besonderheiten Material: Hartmetall Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) Spanbrecher: TM (optimierte Spanform für stabile Zerspanung) Loch: Mit Loch, zylindrisches Loch Plattenform: Rhombisch Einsatz: Drehen (Außen- und Innendrehen) Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe sind mit der VNMG120412E-TM T9225 bearbeitbar? Die VNMG120412E-TM T9225 von Tungaloy ist primär für Stahlbearbeitung ausgelegt; die robuste Universalsorte eignet sich besonders für mittlere bis schwere Schnitte und wechselnde Eingriffsbedingungen. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 1,2 mm sorgt bei der VNMG120412E-TM T9225 für stabile Schnittkräfte und gute Kantentragfähigkeit, was die Oberflächengüte verbessert und Werkzeugbruch reduziert. Worauf ist beim Halterwechsel zu achten? Bei Wechsel auf einen neuen Halter ist auf Formübereinstimmung, Freiwinkel, Toleranzklasse und korrekte Unterlage zu achten; nur so liefert die VNMG120412E-TM T9225 reproduzierbare Ergebnisse. Welche Rolle spielt die CVD-Beschichtung? Die CVD-Beschichtung der VNMG120412E-TM T9225 erhöht die Verschleißfestigkeit und schützt die Schneidkante bei höheren Temperaturen, wodurch die Standzeit bei anspruchsvollen Stahlanwendungen steigt. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9225 ist so ausgelegt, dass sie Zähigkeit bietet und bei leicht unterbrochenen Schnitten zuverlässige Performance liefert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 AH120 Wendeplatten - Tungaloy
High process reliability and a sharp cutting edge meet economical performance in the PVD-coated AH120 grade; the rhombic VNMG160402-TSF insert combines a 0.2 mm corner radius with a 35° geometry for consistent external and internal turning. Order the insert via Metav Werkzeuge or consult the specialists for application-specific advice. VNMG 160402 AH120 – VNMG turning insert, PVD-coated carbide, TSF chipbreaker (Tungaloy) A VNMG160402-TSF AH120 indexable turning insert designed for ISO-standard external and internal turning operations with a rhombic form and cylindrical hole ISO-standard rhombic insert 16 mm PVD-coated carbide grade AH120 TSF chipbreaker for stable chips 0.2 mm corner radius, 35° geometry Reliable geometry for repeatable turning results The rhombic ISO shape and 35° geometry deliver a predictable cutting direction and consistent engagement in both external and internal turning. The combination of a 0.2 mm corner radius and a neutral 0° clearance angle suits light to medium cuts where a sharp cutting edge is required without sacrificing process stability. Such geometry helps to maintain a steady contact zone between insert and workpiece, reducing vibration and improving dimensional consistency during serial production. Coating and grade: what AH120 brings to the process The PVD-coated carbide substrate in grade AH120 is formulated for wear resistance and resistance to chipping under interrupted cuts. The PVD layer enhances surface hardness and reduces adhesion of built-up edge on many workpiece materials, while the underlying carbide provides toughness. For operations that require a sharp edge and reliable tool life, this grade offers a balanced performance that supports productivity and reduces unplanned tool changes. TSF chipbreaker and chip control explained The TSF chipbreaker is engineered to promote short, controllable chips in a range of cutting conditions. Proper chip control safeguards the workpiece surface and protects tool holders from entanglement or damage, especially in longer turning cycles. In practice, the chipformer design reduces manual intervention and cleaning time, supporting smoother machine throughput and safer production environments. Compatibility and selection criteria for holders Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness. The VNMG designation and ISO series indicate the standardised interface; the rhombic plate with a cylindrical hole fits compatible clamping systems and boring bars designed for inserts of this geometry. When selecting a holder, verify that the insert pocket matches the ISO 160402 profile and that clamping screws and underlays correspond to the insert thickness and hole style to ensure stable seating and repeatable results. Practical advantages for workshop workflows Using an indexable insert with a sharp PVD-coated edge reduces regrinding and resharpening effort compared with brazed tools, enabling faster tool changes and predictable replacement intervals. The wear- and chip-resistant properties of the AH120 grade contribute to longer continuous runs and fewer process interruptions. For manufacturers seeking a balance of edge sharpness and process security, this insert supports productive turning across a broad range of components. Contact Metav Werkzeuge for tailored application advice and to request delivery information for the Tungaloy VNMG160402-TSF AH120 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical data Article number: 6854312-Tungaloy Manufacturer SKU: TUN6854312 Model series: ISO turning indexable inserts Label: VNMG160402-TSF AH120 Facts Corner radius: 0.2 mm Insert size: 16 mm Geometry angle: 35° Clearance angle: 0° ISO code: 160402 Manufacturer article number: 6854312 Special features PVD-coated carbide (AH120) TSF chipbreaker Rhombic plate form Cylindrical hole — with hole Suitable for external and internal turning Wear- and break-resistant grade ISO-standardised insert Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ Which materials can be machined with this insert? The VNMG160402-TSF AH120 insert from Tungaloy is intended for turning a broad range of materials; the AH120 grade offers wear resistance and chipping protection suitable for many steels and alloyed materials. How does the TSF chipbreaker assist in production? The TSF chipbreaker on the VNMG160402-TSF insert shapes chips into short, controllable segments, improving chip evacuation and reducing the risk of entanglement during long turning cycles. What does the 0.2 mm corner radius affect in practice? A 0.2 mm corner radius balances edge strength and surface finish; it supports a sharp edge for fine turning while providing enough edge support to resist premature chipping in interrupted cuts. Is the insert compatible with standard ISO holders? Yes; the VNMG160402-TSF follows ISO standard designation and is compatible with holders and boring bars that accept rhombic inserts with the corresponding ISO 160402 profile, hole style and clamping arrangement. What distinguishes the AH120 grade from other carbide grades? The AH120 PVD-coated carbide grade emphasises wear resistance and edge toughness for turning operations where a sharp cutting edge and process reliability are required, helping to extend tool life in serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for stainless steels, precise 0.2 mm corner radius, and ISO compatibility for reliable turning performance; order directly via Metav Werkzeuge or contact our consultants for application guidance. VNMG160402-PS AH6225 — VNMG 160402 AH6225 indexable turning insert for turning, PVD-coated carbide, 0.2 mm radius (Tungaloy) The VNMG160402-PS AH6225 is an ISO-standard rhombic indexable insert designed for external and internal turning; its PVD-coated carbide grade is optimised for sharp, stable cutting edges in varying stainless-steel operations. ISO rhombic insert, VNMG form PVD-coated carbide grade AH6225 0.2 mm corner radius for fine finish PS chipbreaker for reliable chip control Stable cutting under variable stainless-steel conditions The combination of a PVD-coated surface and the AH6225 carbide grade delivers consistent performance when machining stainless steels under fluctuating cutting conditions. The coating reduces build-up on the cutting edge and supports a sharper geometry, while the substrate provides the necessary toughness for repeated interrupted cuts. This results in improved tool life and fewer process interruptions, supporting a measurable increase in productivity for medium- to general-purpose turning tasks. Geometry designed for precision and surface quality The rhombic VNMG form with a 0.2 mm corner radius and a 35° cutting angle yields a balance between edge strength and surface finish. The small corner radius assists in producing finer surface quality and helps to avoid excessive cutting forces in finishing passes. The insert’s 0° relief angle and the available cylindrical central hole ensure secure clamping in standard ISO holders, enabling repeatable positioning and a predictable contact geometry that is easy to integrate into existing tool setups. Simple integration, low-maintenance operation Being ISO-standardised, the insert fits a wide range of external holders and boring bars when the holder’s form, clearance, tolerance class, fastening method, size and thickness match. The PS chipbreaker supports manageable chips for both external and internal turning, reducing the need for frequent manual intervention. Combined with the universal character of the grade, this insert offers an economical route to stable machining: fewer tool changes, consistent surface quality and straightforward stock management when paired with compatible toolholders. For tailored advice on using Tungaloy PVD-coated inserts or to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants are available to support process selection and optimisation. Technical data Article number: 6966280 Manufacturer SKU: TUN6966280 SKU: 6966280-Tungaloy Model series: ISO indexable turning inserts Product name: VNMG160402-PS AH6225 Facts Corner radius: 0.2 mm Insert size: 16 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 35° Hole: with cylindrical hole Special features Material: carbide Coating: PVD Chipbreaker: PS Insert form: rhombic (VNMG) Application: turning (external and internal) Compatibility: ISO standard Suitable for: stainless steels (universal grade AH6225) FAQ Which materials is this insert best suited for? The VNMG160402-PS AH6225 is formulated as a universal grade for stainless steels, offering a balanced edge for mid-range machining and varying conditions. What does the PS chipbreaker provide? The PS chipbreaker on the VNMG160402-PS optimises chip formation for turning operations, promoting controllable chips and reducing the likelihood of tangling during external and internal turning. How does the insert integrate with existing holders? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO-standard VNMG form fits standard VNMG holders when those parameters match. What are the measurable geometry values to consider? Key dimensions are a 0.2 mm corner radius, 16 mm insert size and 4.76 mm thickness; note the 35° cutting angle and the cylindrical central hole for secure clamping. What is the manufacturer article number and SKU? Article number 6966280; manufacturer SKU TUN6966280; SKU 6966280-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6225) and a TSF chipbreaker for reliable, repeatable turning of rostfreier Stahl; the sharp yet stable cutting edge supports medium cutting conditions while maintaining economy and tool life. Order the VNMG160402-TSF AH6225 directly via Metav Werkzeuge or ask our consultants if needed. VNMG 160402 AH6225 ISO turning insert for medium rostfreier Stahl machining — Tungaloy A VNMG160402-TSF AH6225 insert designed for external and internal turning applications, providing a sharp, stable cutting edge and consistent chip control for variable machining conditions. PVD-coated grade AH6225 Optimised TSF chipbreaker Rhombic VNMG shape, 35° lead Suited for rostfreier Stahl machining Consistent performance from PVD-coated carbide for rostfreier Stahl The PVD-coated carbide composition of this grade (AH6225) delivers a balance between edge sharpness and wear resistance that is particularly suitable for rostfreier Stahl. The PVD layer reduces adhesion and improves thermal resistance at the cutting edge, which in practice means longer intervals between indexings and fewer unexpected tool changes. For production environments where moderate feeds and a stable compromise between finish and productivity are required, this combination supports consistent cycle times and reduced scrap rates. Predictable chip control and holder compatibility for efficient setups Designed as an ISO rhombic insert with a 35° lead angle and 0° clearance, the geometry and the TSF chipbreaker are tuned to produce controlled chip formation in typical turning operations. Compatibility with the toolholder depends on form, relief angle, tolerance class, attachment and insert size; the system comprises the insert, a suitable outer holder or brazed bar, clamping pads and replacement screws. The insert’s cylindrical centre hole simplifies secure fastening and repeatable seating, while the 0.2 mm corner radius supports a reliable edge for general finishing and medium roughing. Practical benefits for productivity and process security When used in a properly matched holder and clamping system, this insert supports better surface quality and stable cutting forces, which helps maintain constant results across batches. The combination of a sharp, stable edge and an optimised chipbreaker reduces the risk of built-up edge and improves tolerance control in serial production. Spare inserts and fastening components form part of a robust system approach, reducing downtime and enabling straightforward reconditioning of the machining process. For further clarification on holder selection or process parameters, technical advice is available to ensure optimal application of this insert in the production cell. Contact Metav Werkzeuge today for advice on applying the Tungaloy VNMG160402-TSF AH6225 insert in your turning operations and to arrange supply through our distribution channels — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6917727 SKU: 6917727-Tungaloy Manufacturer article number: TUN6917727 Article name: VNMG160402-TSF AH6225 Numbers / Core technical data Corner radius: 0.2 mm Lead angle: 35° Clearance angle: 0° Insert size: 16 mm ISO designation: 160402 Special features PVD-coated carbide (AH6225) Chipbreaker: TSF Rhombic insert form (VNMG) Cylindrical centre hole Model series: ISO turning inserts Application: Turning (external and internal) FAQ What materials is this insert suitable for? The VNMG160402-TSF AH6225 is specified for rostfreier Stahl and performs reliably in a broad range of stainless applications due to its PVD-coated carbide grade and chipbreaker geometry. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes stable chip formation and evacuation during turning; combined with the AH6225 grade it helps prevent tangled chips and supports consistent surface finish. Which holder characteristics are required for correct fitting? Holder compatibility is determined by insert form, relief/clearance angle, tolerance class, attachment style and insert size; ensure the holder supports a rhombic VNMG insert with a cylindrical hole and a 35° lead angle. What does a 0° clearance angle mean for operation? A 0° clearance indicates a neutral relief geometry suited for specific clamping systems and should be matched to the holder and cutting parameters to avoid rubbing or unintended contact. Is this an original Tungaloy product? The VNMG160402-TSF AH6225 is offered as an original manufacturer product from Tungaloy, ensuring specification conformity and traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 AH6225 Wendeplatten - Tungaloy
VNMG 160402 AH6225 Drehwendeschneidplatte zum Drehen von rostfreien Stählen – Tungaloy Die VNMG 160402 AH6225 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, konzipiert für die Bearbeitung von rostfreien Stählen unter wechselnden Bedingungen. Rhombische Platte, Größe 16 und Radius 0.2 mm PVD-beschichtetes Hartmetall für rostfreie Stähle Spanbrecher ZF für kontrollierte Spanbildung Freiwinkel 0° für stabile Schneidkante Zylindrisches Loch, kompatibel mit ISO-Haltern Präzise Schneidkante für zuverlässige Bearbeitung Die VNMG 160402-ZF AH6225 kombiniert Hartmetall mit einer robusten PVD-Beschichtung, was zu einer deutlich verbesserten Verschleißfestigkeit führt. Diese Kombination sorgt für eine scharfe und zugleich stabile Schneidkante, die insbesondere bei mittleren Schnitttiefen konstante Schnittbilder liefert. Für Anwender bedeutet das eine verlängerte Standzeit und weniger Werkzeugwechsel, wodurch Fertigungsprozesse sicherer und planbarer werden. Speziell abgestimmt auf rostfreie Stähle Die Sorte AH6225 ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt und mindert typische Probleme wie Aufbauschneiden und Kaltverfestigung. Die Platte bietet konstante Oberflächengüten bei wechselnden Schnittbedingungen und reduziert Nacharbeit. Anwender profitieren von gleichmäßigen Ergebnissen bei Serienfertigung und Kleinserien gleichermaßen, da die Sorte universell einsetzbar ist und Lagerhaltungsaufwand verringert. Kompatibilität und sicherer Sitz im Halter Die Passgenauigkeit richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke; deshalb ist die Auswahl des passenden Halters entscheidend. Die rhombische Geometrie in Verbindung mit dem zylindrischen Loch ermöglicht eine sichere Klemmung auf gängigen ISO-Außenhaltern sowie Bohrstangen. Der angegebene Freiwinkel 0° trägt zur Stabilität der Schneidkante bei und erlaubt sichere Schnittbedingungen auch bei instabilen Aufspannungen. Wirtschaftlichkeit durch reduzierte Varianten und bessere Prozesssicherheit Durch die universelle Einsatzfähigkeit der Sorte lassen sich Werkzeugvarianten minimieren, was Lagerkosten und Rüstzeiten reduziert. Die Kombination aus stabiler Kante und kontrollierter Spanbildung durch den Spanbrecher ZF verbessert die Produktivität, da Maschinenlaufzeiten effizienter genutzt werden. Für Betriebe bedeutet das einen direkten Beitrag zur Produktionskostenoptimierung und zur Erhöhung der Liefertermintreue. Mit der Auswahl der AH6225-Sorte von Tungaloy Produktionssicherheit erhöhen und Anfragen direkt an Metav Werkzeuge richten: eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6951040 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160402-ZF AH6225 Hersteller-SKU: TUN6951040 Fakten Eckenradius: 0.2 mm Winkel: 35° Freiwinkel: 0° Plattengröße: 16 mm Plattendicke: 4,76 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-Beschichtung (verschleißfest) Sorte: AH6225 Spanbrecher: ZF (kontrollierte Spanbildung) Plattenform: Rhombisch Loch: Mit zylindrischem Loch Anwendung: Drehen FAQ Für welche Werkstoffe ist diese Platte ausgelegt? Die Platte wurde für die Bearbeitung von rostfreien Stählen entwickelt; die Sorte AH6225 bietet eine universelle Lösung für wechselnde Schnittbedingungen und sorgt für konstante Oberflächengüten. Wie wählt man den passenden Halter für diese Platte? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigungsart, Plattengröße und -dicke ab. Die rhombische Form und das zylindrische Loch ermöglichen die Montage auf gängigen ISO-Außenhaltern und Bohrstangen. Welche Vorteile bringt die PVD-Beschichtung? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und schützt die Schneidkante, was zu längeren Standzeiten und stabileren Prozessen bei der Bearbeitung von rostfreien Stählen führt. Was bewirkt der Spanbrecher ZF? Der Spanbrecher ZF formt kurze, kontrollierte Späne und reduziert so Spanverwicklungen; das verbessert die Maschinensicherheit und erleichtert die Spanabfuhr. Ist die Platte auch für Innen- und Außenbearbeitung geeignet? Ja, die ISO-geometrie und die Sorte AH6225 sind für Außen- und Innendrehen einsetzbar; für optimale Ergebnisse Spanbrecher und Schneidbedingungen an das Werkstück anpassen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 AH8015 Wendeplatten - Tungaloy
VNMG160402 AH8015 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG160402 AH8015 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen hitzebeständiger Legierungen und bietet ein ausgewogenes Verhältnis aus Verschleißfestigkeit und Schneidkantenstabilität VNMG »VNMG160402 AH8015« von Tungaloy PVD-beschichtetes Hartmetall für hohe Standzeit ZF-Spanbrecher für stabile Spanbildung Rhombische Form 16 mm mit Radius 0,2 mm Mit zylindrischem Loch und 4,76 mm Plattendicke Zuverlässiges Design für produktive Zerspanung Die VNMG160402 AH8015 wurde als ISO-genormte Wendeschneidplatte ausgelegt, um die Integration in gängige Haltersysteme zu erleichtern. Das rhombische Plattenformat in Kombination mit einem Eckenradius von 0,2 mm sorgt für kontrollierten Spanverlauf und hohe Prozessstabilität. Durch die standardisierten Abmessungen lassen sich Halterwechsel und Nachbestückungen effizient planen, was Produktionsabläufe vereinfacht und Stillstandszeiten reduziert Beschichtung und Schneidstoff für längere Standzeiten Der PVD-beschichtete Hartmetall-Schneidstoff der Sorte AH8015 bietet eine ausgewogene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität. Die PVD-Beschichtung reduziert Reibung an der Schneidkante und verbessert die Hitzeresistenz, sodass insbesondere hitzebeständige Legierungen wirtschaftlich bearbeitet werden können. Für Anwender bedeutet das weniger Nachschleifen und bessere Wiederholgenauigkeit in Serienprozessen Spanformer und Geometrie für saubere Bearbeitung Der integrierte ZF-Spanbrecher ist auf stabile Spanbildung ausgelegt und erleichtert das Entfernen langer Späne beim Außen- und Innendrehen. Die rhombische Form mit der Plattengröße 16 mm und der Plattendicke 4,76 mm bietet eine gute Spannfläche am Halter und sorgt für belastbare Befestigung. Das zylindrische Loch unterstützt die präzise Positionierung auf Klemmsystemen und erhöht die Wiederholgenauigkeit bei Plattenwechseln Empfehlung für Anwendung und Anwendergruppen Diese Wendeschneidplatte richtet sich an Anwender in der Serienfertigung und im Werkzeugbau, die hitzebeständige Legierungen drehen und dabei auf konstante Zerspanungsergebnisse Wert legen. Die Kombination aus AH8015-Schneidstoff und ZF-Spanformer macht die Platte zur ersten Wahl für produktive Bearbeitungen, bei denen Standzeit und Prozesssicherheit zentral sind. Für spezifische Werkstoff- oder Prozessfragen empfiehlt sich die Abstimmung der Schnittdaten mit der Werkzeugtechnik Empfehlung: Die VNMG160402 AH8015 von Tungaloy für produktive Drehprozesse direkt bei Metav Werkzeuge anfragen – bei technischen Rückfragen eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6951041 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160402-ZF AH8015 Fakten Eckenradius: 0,2 mm Plattengröße: 16 mm Plattendicke: 4,76 mm Freiwinkel: 0° Winkel: 35° Hersteller-SKU: TUN6951041 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (PVD: verschleißmindernde Oberflächentechnik) Sorte: AH8015 Spanbrecher: ZF (stabile Spanbildung) Loch: mit Loch Lochstil: zylindrisches Loch Einsatz: Drehen, Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben Kompatibilitätshinweis: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke prüfen FAQ Welche Werkstoffe eignen sich für diese Wendeschneidplatte? Die VNMG160402 AH8015 von Tungaloy ist besonders für die Bearbeitung hitzebeständiger Legierungen geeignet; die Sorte AH8015 bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität Welchen Vorteil bietet die PVD-Beschichtung? Die PVD-beschichtung der VNMG160402 AH8015 reduziert die Reibung an der Schneidkante und erhöht die Hitzeresistenz, was in längeren Standzeiten und besserer Oberflächenqualität resultiert Wie beeinflusst der ZF-Spanbrecher die Bearbeitung? Der ZF-Spanbrecher sorgt für stabile Spanbildung und erleichtert das Abtransportieren der Späne, wodurch die Prozesssicherheit beim Außen- und Innendrehen erhöht wird Welche Abmessungen sind für die Auswahl des Halters relevant? Bei der Auswahl des passenden Halters für die VNMG160402 AH8015 sind Plattengröße, Plattendicke, Lochbild, Freiwinkel und Toleranzklasse zu beachten, um eine sichere Befestigung und optimale Schnittbedingungen zu gewährleisten Ist die VNMG160402 AH8015 für Serienfertigung geeignet? Ja, die Kombination aus PVD-beschichtetem Hartmetall der Sorte AH8015 und der ZF-Spanformer-Geometrie macht die Platte besonders geeignet für produktive Serienprozesse mit hohen Anforderungen an Standzeit und Wiederholgenauigkeit Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 carbide grade and the TSF chipbreaker for stable cutting-edge performance in the machining of heat‑resistant alloys; the ISO rhombic form and standard dimensions ensure straightforward compatibility with matched holders and clamping sets. Order the insert directly via Metav Werkzeuge or ask the consultants if needed. VNMG160402-TSF AH8015 — ISO turning insert with PVD-coated carbide, Tungaloy The VNMG160402-TSF AH8015 is a rhombic ISO turning insert designed for external and internal turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability for general machining. PVD-coated AH8015 grade For heat‑resistant alloys Rhombic ISO form VNMG 35° TSF chipbreaker, 0.2 mm corner radius Reliable ISO form and simple holder compatibility The insert follows the ISO VNMG geometry, which makes integration into existing tool systems predictable and efficient. The rhombic plate geometry combined with a 35° approach produces consistent cutting forces and facilitates access in confined areas. Compatibility depends on form, clearance angle, tolerance class, attachment and plate thickness; these standardised parameters simplify holder selection and reduce setup time. Clear mechanical interfaces and the cylindrical hole ensure secure clamping and repeatable positioning, supporting uninterrupted production runs. Durable PVD‑coated carbide for consistent performance The AH8015 grade is a PVD‑coated carbide selected as a first choice for general turning of heat‑resistant alloys, offering an advantageous compromise between wear resistance and cutting‑edge stability. The coating improves resistance to abrasive and adhesive wear at elevated temperatures, which extends service life and maintains a reliable cutting geometry. As a result, operators benefit from fewer insert changes and a steadier surface finish over longer batches, translating into improved process efficiency and lower overall tooling consumption. Controlled chips and improved process reliability The TSF chipbreaker is designed to shape chips for safe evacuation during both external and internal turning. Combined with the 0.2 mm corner radius, it promotes predictable chip formation and reduces the risk of chatter or surface defects under stable set‑ups. Selecting the appropriate chipbreaker and grade according to the workpiece material, machining strategy and machine rigidity leads to better material removal rates and minimised downtime for chip‑related interruptions, thereby supporting a more reliable production flow. System setup and application guidance for consistent results For a productive tooling system, pair the insert with a matched external holder or boring bar, a suitable underlay/shim and the correct clamping screws. The insert’s 0° clearance angle influences the effective rake and contact conditions at the cutting edge and should be considered when defining cutting parameters. The modest 0.2 mm corner radius offers a balance between edge strength and the ability to achieve fine surface finishes. The VNMG160402‑TSF AH8015 is supplied as an ISO‑standard plate ready for integration into conventional turning tool assemblies, ensuring straightforward part interchangeability and predictable machining behaviour. Contact Metav Werkzeuge for application advice and to secure the VNMG160402-TSF AH8015 by Tungaloy (SKU TUN6917729) for your next turning operations Technical data Article number: 6917729 Manufacturer SKU: TUN6917729 Model series: ISO turning inserts Insert designation: VNMG160402‑TSF Material: Carbide Grade/coating: AH8015 (PVD‑coated) Chipbreaker: TSF Facts Insert size: 16 Corner radius: 0.2 mm Clearance angle: 0° Approach angle: 35° Hole: with cylindrical hole Typical application: Turning Special features Rhombic plate form VNMG First choice for heat‑resistant alloys Balanced wear resistance and edge stability ISO‑standard dimensions for holder compatibility Designed for external and internal turning Supplied for use with matched holder, shim and clamping set FAQ What materials is this insert suitable for? The VNMG160402‑TSF AH8015 is optimised for machining heat‑resistant alloys and performs well where a balance of wear resistance and edge stability is required. Which chipbreaker should be used for reliable chip control? The TSF chipbreaker integrated with this insert is intended for controlled chip formation in a wide range of turning operations and is recommended for typical external and internal applications. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius improves edge strength while allowing good surface quality; it is suitable where a compromise between robustness and finish is needed. How to ensure the insert mounts correctly in existing toolholders? Ensure the holder matches the VNMG form, 35° approach, tolerance class and the plate’s hole style; correct matching guarantees secure clamping and repeatable positioning using the standard clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 AT9530 Wendeplatten - Tungaloy
VNMG 160402 AT9530 Drehwendeschneidplatte von Tungaloy zum Drehen Die VNMG160402-TSF AT9530 ist eine ISO-genormte Drehwendeschneidplatte für Schlicht- und Leichtbearbeitung von Stahl mit Fokus auf Oberflächengüte ISO-genormt, kompatibel zu gängigen Haltern Beschichtetes Cermet für hohe Oberflächengüte Präziser Eckenradius 0.2 mm für feine Oberflächen Rhombische Form mit zylindrischem Loch Spanbrecher TSF optimiert für gleichmäßigen Span Haltbarkeit und Wirtschaftlichkeit für die Fertigung optimieren Die AT9530-Beschichtung auf dem Cermet-Trägermaterial sorgt für gleichmäßigen Verschleiß und stabile Schneidkante bei Schlichtoperationen. Durch die reduzierte Reibung bleibt die Schnittzone kühler, was zu längeren Werkzeugstandzeiten und weniger Stillstandszeiten in der Produktion führt. Anwender profitieren von weniger Werkzeugwechseln und konstanteren Fertigungsergebnissen, wodurch die Wirtschaftlichkeit im Zerspanungsprozess steigt. Präzise Oberflächen und gleichmäßige Spanbildung erzielen Mit einem Eckenradius von 0.2 mm und dem Spanbrecher TSF lassen sich sehr feine Oberflächen erzielen. Dieser Aufbau ist speziell für das Schlichten konzipiert und minimiert Schnittkräfte sowie Vibrationen. Für Anwender, die Wert auf Maßhaltigkeit und hervorragende Oberflächengüte legen, bietet die Platte einen direkten Vorteil: gleichmäßigere Ratterwerte und eine reproduzierbare Bauteilqualität bei Außen- und Innendrehen. Einfache Integration in existierende Werkzeugsysteme Die Platte ist ISO-genormt und passt zu Haltern, die Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke berücksichtigen. Die rhombische Form mit zylindrischem Loch ermöglicht schnelle Montage und hohen Sitzmoment. Durch die standardisierte Bauform lassen sich Maschinenwechsel und Werkzeugvoreinstellungen vereinfachen, was Umrüstzeiten verkürzt und den Durchsatz erhöht. Für wen diese Platte entwickelt wurde Zerspanungsbetriebe, Lohnfertiger und Serienhersteller, die beim Schlichten von Stahl besonders auf Oberflächengüte und Prozesssicherheit achten, finden in dieser Wendeschneidplatte eine geeignete Lösung. Die Kombination aus Hartmetall-Träger und beschichtetem Cermet macht die Platte zur Wahl für anspruchsvolle Fertigungsaufgaben, bei denen Maßhaltigkeit und Reproduzierbarkeit entscheidend sind. Empfehlen Sie die AT9530-Beschichtung von Tungaloy für präzise Schlichtbearbeitung und kontaktieren Sie unsere technische Beratung per E-Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 für eine passgenaue Auswahl Produktmerkmale Artikelnummer: 6757864 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160402-TSF AT9530 SKU: TUN6757864 Fakten Eckenradius: 0.2 mm Winkel: 35° Plattengröße: 16 mm Freivinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: AT9530 Spanbrecher: TSF Plattenform: rhombisch Lochstil: zylindrisches Loch Einsatz: Drehen Einsatzbeschreibung: Schlicht- und Leichtbearbeitung von Stahl mit Schwerpunkt auf Oberflächengüte Modellserie: ISO-Drehwendeschneidplatten Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen Passform FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die VNMG160402-TSF AT9530 von Tungaloy ist speziell für die Bearbeitung von Stahl konzipiert und eignet sich besonders für Schlicht- und Leichtbearbeitung, bei der hohe Oberflächengüte gefordert wird. Welchen Vorteil bietet die AT9530-Beschichtung? Die AT9530-Beschichtung auf dem Cermet-Schneidstoff sorgt für gleichmäßigen Verschleiß und eine stabile Schneidkante, was zu längeren Standzeiten und konstanteren Oberflächen führt. Welche Halter sind kompatibel mit dieser Platte? ISO-genormte Halter, die die Parameter Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke berücksichtigen, sind mit der VNMG160402-TSF AT9530 kompatibel. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Ein Eckenradius von 0.2 mm reduziert Schnittkräfte und ermöglicht feinere Oberflächen, besonders beim Schlichten, wodurch Maßhaltigkeit und Oberflächengüte verbessert werden. Welche Rolle spielt der Spanbrecher TSF? Der Spanbrecher TSF ist auf gleichmäßige Spanbildung ausgelegt und unterstützt stabile Schnittbedingungen, was die Prozesssicherheit und die Oberflächenqualität erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 GT9530 Wendeplatten - Tungaloy
VNMG160402-TSF 160402 GT9530 – Drehen, ISO-Drehwendeschneidplatte von Tungaloy Die VNMG160402-TSF GT9530 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, ausgelegt auf verschleißarme Schlicht- bis leichte Universalbearbeitung von Stahl mit beschichtetem Cermet. ISO-genormte Rhombusplatte VNMG für gängige Halter Beschichtetes Cermet für bessere Oberflächenqualität Eckenradius 0,2 mm für feine Schlichtschnitte Zylindrisches Loch: sichere Befestigung im Halter Präzision und Oberflächenqualität für Schlichtbearbeitung Die VNMG160402-TSF GT9530 überzeugt durch den Einsatz eines beschichteten Cermet-Schneidstoffs, der speziell für stabile Schlichtbedingungen entwickelt wurde. Die Kombination aus Hartmetall-Träger und moderner Beschichtung reduziert den Verschleiß und verbessert die Oberflächenqualität bei Stahlbearbeitung. Anwender profitieren von gleichmäßigem Gratverhalten und konstanter Bearbeitungsqualität, was Rüst- und Nacharbeit minimiert und die Produktivität steigert. Kompatibilität und Einsatz im System Die Platte ist ISO-genormt und passt zu Haltern, die Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke unterstützen. Das rhombische Plattenformat mit zylindrischem Loch ermöglicht sichere Spannungen auf Außenhaltern oder Bohrstangen. Der Freiwinkel 0° und der präzise Eckenradius 0,2 mm sind auf feine Schlichtbewegungen abgestimmt; dadurch lassen sich präzise Innen- und Außenkonturen mit gleichbleibender Qualität realisieren. Wirtschaftlichkeit und Werkzeugstandzeit Die Sorte GT9530 wurde für längere Standzeiten bei stabilen Bearbeitungsbedingungen optimiert. Durch geringere Verschleißrate und stabile Spanbildung sinkt der Werkzeugverbrauch, was sich direkt auf die Fertigungskosten auswirkt. In Kombination mit geeigneten Spanbrechern wie TSF reduziert sich die Anzahl der Werkzeugwechsel; das führt zu höherer Maschinenauslastung und konstanter Teilequalität bei Serienfertigung. Zielgruppe und Anwendungsempfehlung Das Produkt richtet sich an Zerspanungsbetriebe und Fertigungen, die Wert auf feine Oberflächen und reproduzierbare Schlichtresultate legen. Empfohlen ist die Verwendung bei mittel- bis hochstabilen Bearbeitungsbedingungen auf Stahl. Bei unruhigen Aufspannungen oder groben Schruppoperationen sind robustere Sorten oder andere Spanbrecher zu prüfen. Empfehlung: Für Schlichtaufgaben die GT9530-Sorte wählen und technische Beratung bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6998105 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160402-TSF GT9530 Hersteller-SKU: TUN6998105 Daten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: GT9530 (beschichtetes Cermet) Spanbrecher: TSF (Schlicht) Lochstil: zylindrisches Loch Plattenform: rhombisch Einsatzbereich: Außen- und Innendrehen FAQ Wie eignet sich die Platte für Stahlbearbeitung? Die VNMG160402-TSF GT9530 von Tungaloy ist speziell als verschleißarme Schlicht- bis leichte Universalsorte für Stahl ausgelegt und liefert konstante Oberflächenqualität bei stabilen Bearbeitungsbedingungen. Welche Halter sind kompatibel mit der VNMG160402-TSF? ISO-konforme Außenhalter und Bohrstangen, die die Form, Plattendicke 4,76 mm, Plattengröße 16 mm und zylindrisches Loch aufnehmen, sind kompatibel; die Passung hängt von Freiwinkel und Toleranzklasse des Halters ab. Wann ist die GT9530-Sorte gegenüber anderen Sorten vorteilhaft? GT9530 ist vorteilhaft bei Schlichtoperationen, wenn längere Standzeit und bessere Oberflächen wichtig sind; bei rauen Schruppbedingungen sollte auf verschleißfestere Sorten gewechselt werden. Welche Rolle spielt der Spanbrecher TSF? Der Spanbrecher TSF ist für Schlichtaufgaben konzipiert und sorgt für kontrollierte Spanbildung, was die Standzeit der VNMG160402-TSF GT9530 verlängert und die Bearbeitungsqualität sichert. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die Platte ist für Außen- und Innendrehen konzipiert; die rhombische Form und der Eckenradius 0,2 mm ermöglichen feine Konturen und präzise Schnitte. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 NS9530 TSF Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet cutting edge, a 0.2 mm corner radius for superior surface finish and the proven ISO VNMG form for reliable holder compatibility; order the insert directly via Metav Werkzeuge or ask the consultants for matching holders and shims. VNMG160402-TSF NS9530 – ISO turning insert for finishing by Tungaloy The VNMG160402-TSF NS9530 is a rhombic ISO turning insert engineered for high-quality finishing of steel components in continuous cuts and small depths of cut. Fine finishing cermet grade NS9530 0.2 mm corner radius for smooth surfaces ISO VNMG form with cylindrical hole 35° relief angle for reduced cutting forces Consistent finishing performance with a cermet edge The insert uses an uncoated cermet grade optimised for finishing operations, which delivers a sharp cutting edge and low cutting forces that contribute to a superior surface finish. The NS9530 grade is designed specifically for steel finishing, providing dimensional stability during continuous cuts and when working with small depths of cut. For practical machining, this means fewer passes to achieve the required Ra values and consistent part quality across production batches. The short cutting edge engagement combined with a 0.2 mm corner radius helps to reduce built-up edge and to maintain a uniform surface profile on turned external or internal diameters. System compatibility and secure assembly for predictable results The insert conforms to the ISO VNMG form and therefore requires a matching external holder or boring bar. Compatibility is determined by insert form, clearance angle (0°), tolerance class, fastening method, size and thickness. The plate features a cylindrical hole for positive positioning and works with standard underplate/shim sets and replacement screws as part of the complete system. With a 4.76 mm thickness and a nominal size of 16 mm, the geometry offers robust seating and repeatable clamping, which supports stable cutting conditions and repeatability across tool changes. Selecting the correct holder and clamp set minimises vibration and preserves the fine edge of the insert. Practical application advice for reliable machining Intended primarily for turning steel components, the insert and its TSF chipbreaker suit applications where small feeds and light depths of cut are used to achieve high surface quality. For best results, pair the insert with a stiff toolholder and controlled feed rates to exploit the sharp edge and to avoid premature edge chipping. The 35° relief angle contributes to reduced cutting forces and improved shear conditions, especially during long continuous cuts. When selecting the chipbreaker and grade, match them to the stock material and the stability of the set-up; a stable assembly plus the NS9530 finishing grade will typically extend effective tool life and reduce rework. Contact Metav Werkzeuge for tailored advice on holders, clamping kits and pairing options for Tungaloy inserts and secure the VNMG160402-TSF NS9530 with expert support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998228-Tungaloy Manufacturer SKU: TUN6998228 Manufacturer item number: 6998228 Model series: ISO-Drehwendeschneidplatten Label: VNMG160402-TSF NS9530 Core specifications Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief/clearance angle: 0° Insert angle: 35° Special features Uncoated cermet grade NS9530 TSF chipbreaker Rhombic plate form (VNMG) Cylindrical hole for positive locating ISO-standardised turning insert for finishing FAQ What materials is this insert best suited for? The VNMG160402-TSF NS9530 is optimised as a finishing grade for steel, offering a sharp edge and controlled cutting forces suited to continuous cuts and small depths of cut. How does the 0.2 mm corner radius affect the surface finish? A 0.2 mm corner radius provides a balance between edge strength and the ability to produce a fine surface finish, reducing the likelihood of visible tool marks on turned components. Which holder features are required for correct compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; use an ISO-compatible VNMG external holder with matching clamping set and underplate for optimal seating. Is the insert supplied ready-to-use or does it need additional parts? The plate itself is the cutting element; a suitable external holder or boring bar, underplate/shim and replacement screws are required to assemble the complete cutting system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 T6215 Wendeplatten - Tungaloy
VNMG160402-ZF T6215 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG160402-ZF T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen Rhombische Platte, 16 mm Größe Eckenradius 0,2 mm für feine Konturen CVD-beschichtetes Hartmetall für lange Standzeit Mit zylindrischem Loch und 0° Freiwinkel Produktivität steigern durch robuste Beschichtung und verschleißfeste Geometrie Die CVD-Beschichtung auf dem Hartmetall sorgt für eine deutlich verbesserte Standzeit und reduzierte Werkzeugkosten in der Serienbearbeitung. Durch die Kombination aus verschleißfester Sorte T6215 und der präzisen Eckenradius-Geometrie lassen sich Oberflächenqualität und Spanbildung beim Drehen von rostfreiem Stahl stabilisieren. Das Ergebnis ist weniger Nacharbeit und höhere Ausbringleistung pro Werkzeugwechsel. Passgenauigkeit und Prozesssicherheit dank ISO-Norm und Geometrie ISO-Genormte Abmessungen und die rhombische Plattenform gewährleisten die Austauschbarkeit und Wiederholgenauigkeit beim Einbau in Außenhalter oder Bohrstangen. Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; mit 35° Schneidkeilwinkel und 0° Freiwinkel eignet sich die Platte besonders für anspruchsvolle Schnittbedingungen. Dadurch lassen sich Rüstzeiten verkürzen und Maschinenlaufzeiten wirtschaftlicher nutzen. Praktische Einsatzhinweise für Anwender und Fertigungsplaner Die Sorte T6215 ist für stabile bis leicht unterbrochene Schnitte an rostfreiem Stahl optimiert; den passenden Spanbrecher ZF wählen, um Spanbildung und Kühlschmierstofffluss zu kontrollieren. Für sicheren Systemaufbau werden Unterlage/Klemmsatz und passende Ersatzschrauben empfohlen. CVD steht für chemische Gasphasenabscheidung und beschreibt die Schichttechnologie, die Härte und Hitzebeständigkeit der Schneidkante erhöht und so konstante Ergebnisse ermöglicht. Empfehlung: Für wirtschaftliche Serienbearbeitung von rostfreiem Stahl die Tungaloy VNMG160402-ZF T6215 einsetzen; bei technischen Fragen oder Auswahlhilfe erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6951039 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160402-ZF T6215 Hersteller SKU: TUN6951039 SKU: 6951039-Tungaloy Fakten Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Gasphasenabscheidung) Sorte: T6215 Spanbrecher: ZF (Spanformer für rostfreie Stähle) Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Ist diese Wendeschneidplatte für rostfreie Stähle geeignet? Ja. Die VNMG160402-ZF T6215 von Tungaloy wurde speziell für das Drehen rostfreier Stähle entwickelt und bietet durch die CVD-Beschichtung und die Sorte T6215 erhöhte Standzeit bei stabilen bis leicht unterbrochenen Schnittbedingungen. Welchen Spanbrecher sollte man wählen? Der integrierte Spanbrecher ZF ist für rostfreie Stähle optimiert; bei abweichenden Schnittbedingungen empfiehlt sich die Auswahl eines Spanbrechers, der auf Werkstoff, Bearbeitungsart und Stabilität abgestimmt ist. Wie wird die Kompatibilität zum Halter sichergestellt? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Bei der VNMG160402-ZF ist die rhombische Form, 16 mm Größe und die genormte Lochanordnung ausschlaggebend für die Auswahl des passenden Außenhalters. Was bedeutet die Bezeichnung T6215 und die CVD-Beschichtung? T6215 bezeichnet die Hartmetallsorte mit guter Verschleißfestigkeit für rostfreie Stähle. CVD steht für chemische Gasphasenabscheidung, eine Schichttechnologie, die Härte und Wärmebeständigkeit der Schneidkante erhöht. Für welche Bearbeitungsarten ist die Platte geeignet? Die Platte ist für Außen- und Innendrehen ausgelegt; sie eignet sich besonders für produktive Anwendungen, bei denen stabile Schnittbedingungen vorherrschen oder nur leicht unterbrochene Schnitte auftreten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160402 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness from the T9215 grade, combined with the ISO VNMG160402 geometry and a 0.2 mm nose radius, deliver consistent productivity in medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. VNMG 160402 T9215 Turning Insert (VNMG160402) by Tungaloy — CVD-coated carbide, 35° The VNMG160402 T9215 is an ISO rhombic indexable insert for turning, optimised for medium-steel machining and engineered to balance tool life with stable cutting performance ISO-design rhombic insert VNMG format CVD-coated carbide grade T9215 Double-sided chipbreaker, cylindrical hole Size 16, 35° rake and 0.2 mm radius Engineered for efficient medium-steel turning The CVD-coated carbide grade T9215 is designed to combine wear resistance with fracture toughness, making it a practical choice for continuous and lightly interrupted cuts on medium-strength steels. The coating improves thermal resistance and edge stability, which translates into longer tool life and fewer index changes, supporting a steady production flow. This performance-oriented formulation enables higher material removal rates without compromising workpiece finish. Precise geometry for reliable chip control and clamping The VNMG form and rhombic plate geometry together with a 0.2 mm nose radius provide accurate profile control and predictable chip formation. The insert’s 4.76 mm thickness and 16 mm nominal size match standard ISO holders; compatibility relies on matching form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole ensures secure clamping in compatible external holders or boring bars, reducing the risk of movement under load and promoting consistent machining results. Coating and grade benefits that reduce downtime A CVD coating on a hard carbide substrate enhances resistance to built-up edge and thermal wear, improving process reliability in batch production. The T9215 grade is positioned as a first choice for mid-range steel machining where a balance between edge life and toughness is required. Selecting this grade with a double-sided chipbreaker allows economical indexing and maintains chip control across a range of feeds, reducing interruptions and contributing to predictable cycle times. Practical system considerations and recommended use The insert is part of a system comprising the ISO indexable plate, a suitable external holder or boring bar, a shim/clamp set and replacement screws. Choose the double-sided chipbreaker and the specific grade according to workpiece material, machining mode and machine rigidity to achieve optimal results. For applications with intermittent engagement consider verifying holder stability and adapting parameters; for continuous turning the combination of geometry and CVD-coated carbide supports steady high-productivity operation with good surface quality. For tailored application support or to confirm holder compatibility for the Tungaloy VNMG160402 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation. Technical Data Manufacturer article number: 6966277 SKU: 6966277-Tungaloy Manufacturer SKU: TUN6966277 Material: carbide Model series: ISO turning indexable inserts ISO designation: VNMG160402 Grade: T9215 Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Rake angle: 35° Clearance angle: 0° Special features CVD-coated carbide, grade T9215 Rhombic plate shape (VNMG) Double-sided chipbreaker Cylindrical hole for fastening ISO-standard indexable insert for turning Suited for medium-steel machining Compatible with appropriate external holders and boring bars Designed for continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The VNMG160402 T9215 insert is formulated primarily for medium-strength steel machining, where the CVD-coated carbide grade T9215 balances wear resistance with toughness. Can the insert be indexed to extend service life? Yes, the insert features a double-sided chipbreaker that permits indexing to use multiple cutting edges before replacement, improving economy and uptime. How does the CVD coating help in production runs? The CVD coating on the T9215 grade increases thermal and abrasive wear resistance, which enhances edge stability and reduces the frequency of tool changes during continuous production. What does the VNMG160402 designation indicate in practical terms? The VNMG160402 code denotes the ISO rhombic plate geometry and form factor; combined with the 16 mm size and 4.76 mm thickness it informs holder selection and clamping compatibility. Is the insert suitable for interrupted cuts? The grade and geometry are suitable for continuous to lightly interrupted cuts; for heavier interruptions, evaluate machine rigidity and select an appropriate chipbreaker or grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a ZF chipbreaker and a precise 0.2 mm corner radius for reliable, high-productivity turning of medium steels. Order the insert directly via Metav Werkzeuge or consult our experts for application guidance. VNMG160402-ZF T9215 ISO turning insert by Tungaloy — CVD-coated carbide, ZF chipbreaker The VNMG160402-ZF T9215 is an ISO indexable turning insert designed for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness in continuous to light interrupted cuts CVD-coated carbide T9215 grade ZF chipbreaker for steel applications Rhombic 16 × 4.76 mm plate geometry 0.2 mm corner radius, 0° clearance Optimised performance for medium-steel turning The CVD-coated carbide composition of this grade delivers high wear resistance while maintaining breakage resistance, which translates to longer tool life and fewer tool changes during batch production. The specified T9215 grade is intended as a first choice for medium steel machining, combining thermal load tolerance with mechanical strength to support higher cutting parameters. For processes that prioritise throughput, the combination of coating and substrate enables stable cutting and consistent part quality over extended cycles. Geometry and clamping that support consistent results A rhomboidal form with a 16 mm inscribed circle and 4.76 mm plate thickness provides a compact, rigid cutting edge suited to many standard holders. The 0° clearance geometry and a 0.2 mm corner radius give a compromise between edge strength and surface finish: the small radius improves edge robustness in interrupted cuts while still allowing respectable finishes on turned surfaces. Compatibility with the clamping system depends on form, relief, tolerance class, fixing method, size and thickness; matching the insert to the correct holder secures repeatable positioning and stable cutting forces. Practical machining behaviour and chip control The integrated chipbreaker ZF has been developed for steel applications to promote predictable chip formation and evacuation, especially under continuous and light interrupted cutting regimes. Controlled chip flow reduces the risk of tangling and improves surface consistency, while the coated substrate reduces build-up on the cutting edge. When selecting cutting data, adapt feeds and speeds to workpiece rigidity and the intended surface finish; the insert’s properties support higher productivity where machine and workholding permit. System compatibility and handling tips This insert forms part of an ISO turning insert system comprising the indexable plate, an appropriate external holder or boring bar, a shim/clamp set and replacement screws for fixation. Correct installation and torque on the clamping screw are essential for repeatable performance; loose or incorrect clamping can negate the insert’s wear and fracture benefits. For internal applications, ensure sufficient coolant flow and check reach and rigidity to avoid chatter. When in doubt about holder selection or cutting regimes, consult the technical team for tailored recommendations. For tailored advice on integrating Tungaloy T9215 inserts into production workflows or to confirm suitability for a specific turning task, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultancy and availability information. Technical data Article number: 6951037 Manufacturer SKU: TUN6951037 Our SKU: 6951037-Tungaloy Item name: VNMG160402-ZF T9215 Model series: ISO turning indexable inserts Facts Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Cutting angle: 35° Hole: cylindrical, with hole Features Material: carbide, CVD-coated Grade: T9215 Chipbreaker: ZF Application: turning, external and internal turning Compatibility determined by form, relief, tolerance class, fixing, size and thickness FAQ Which materials is this insert best suited for? The VNMG160402-ZF T9215 by Tungaloy is optimised for medium steel machining; the T9215 grade combines wear resistance and fracture toughness suitable for continuous to light interrupted cuts. Can the insert be used for both external and internal turning? Yes, the ISO indexable design supports both external and internal turning operations when matched with an appropriate holder and correct clamping components. What role does the 0.2 mm corner radius play in turning? A 0.2 mm corner radius increases edge strength and reduces chipping in interrupted cuts while still allowing a good surface finish on turned parts. Why choose the ZF chipbreaker for steel applications? The ZF chipbreaker promotes consistent chip formation and evacuation in steel, improving process stability and reducing the likelihood of chip-related interruptions. How is compatibility with the toolholder ensured? Compatibility depends on insert form, relief, tolerance class, fixing method, size and thickness; confirm holder geometry and clamping style match the insert specifications before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated T9225 grade and the proven TSF chipbreaker for reliable medium-to-heavy steel turning; compatibility with ISO tooling ensures straightforward integration. Order the VNMG160402-TSF T9225 indexable insert via Metav Werkzeuge or consult our technical team for application advice. VNMG160402-TSF T9225 indexable turning insert — CVD-coated carbide, TSF chipbreaker, 35° cutting angle (Tungaloy) A VNMG160402-TSF T9225 indexable insert for turning applications, designed as an ISO‑standard rhombic plate for external and internal turning where robustness and chip control are required VNMG160402-TSF T9225 CVD-coated carbide Robust universal grade for medium–heavy steel TSF chipbreaker for interrupted cuts Rhombic 16 size, 35° cutting angle Reliable performance for medium‑to‑heavy steel turning The T9225 grade is a CVD‑coated carbide developed for robust, universal performance in medium‑to‑heavy steel machining. Its composition prioritises toughness to withstand varying engagement conditions and mildly interrupted cuts, which reduces the risk of flank chipping under less stable setups. As a consequence, productivity remains consistent even when operating across batches with differing stability, while tool life is extended compared with uncoated grades. The result is dependable component quality in long production runs and fewer tool changes during shift work. ISO compatibility simplifies tooling selection and setup The insert conforms to the ISO plate family and is dimensioned to match holders by form, clearance angle, tolerance class, attachment method, size and thickness. Specifying an ISO plate like this one reduces uncertainty when selecting a suitable external holder or boring bar: simply match the plate designation and geometry to the clamping system. This standardisation speeds up tool procurement and makes toolroom logistics more predictable, since replacement plates fit the same families of holders across machines. Stable cutting edge and effective chip control Equipped with the TSF chipbreaker and a 0.2 mm corner radius, the geometry promotes reliable chip formation and evacuation, particularly in steels where chips tend to be long or stringy. The plate’s 35° cutting angle and rhombic form provide a favourable rake and approach for both finishing and light roughing passes, balancing surface finish and cutting forces. For slightly interrupted operations, the combination of the T9225 grade and TSF chip control lowers the chance of unexpected edge damage and contributes to a consistent workpiece finish. System advice and typical applications This plate is intended for use in an ISO turning system comprising an indexable insert, a compatible external holder or boring bar, and the matching shim/clamp set with replacement screws. Typical applications include external and internal turning of steel components where medium to heavy cuts are required. Select the TSF chipbreaker and T9225 grade when operations call for higher toughness and reliable chip control rather than maximum economy on uninterrupted finishing passes. The insert’s rhombic form and cylindrical hole facilitate secure clamping and simple orientation in most standard holders. For reliable heavy‑duty turning with Tungaloy’s T9225 inserts, contact Metav Werkzeuge for tailored advice or to place an order at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6944918 Manufacturer SKU: TUN6944918 SKU: 6944918-Tungaloy Item label: VNMG160402-TSF T9225 Facts Corner radius: 0.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Cutting angle: 35° Clearance angle: 0° Special features CVD‑coated carbide grade T9225 TSF chipbreaker Rhombic plate form Cylindrical hole (with hole) ISO turning insert series Intended application: turning Robust universal grade for medium‑to‑heavy steel machining FAQ Which materials is this insert suitable for? The VNMG160402-TSF T9225 insert from Tungaloy is optimised for medium‑to‑heavy steel machining thanks to its CVD coating and tough carbide grade. What are the key dimensions and geometry of the plate? Plate dimensions and geometry: 16 mm size, 4.76 mm thickness, 0.2 mm corner radius and a 35° cutting angle for the VNMG160402-TSF T9225 (SKU 6944918-Tungaloy). Is this insert suitable for interrupted cuts? Yes, the TSF chipbreaker combined with the T9225 grade provides additional toughness and chip control, making the insert suitable for lightly interrupted cuts and variable engagement conditions. Does the insert come with a holder or clamp set? The VNMG160402-TSF T9225 is supplied as an indexable insert; compatible holders, shims and clamping kits are available separately and should be matched to the ISO plate designation. How is compatibility with existing toolholders ensured? Compatibility depends on plate form, clearance angle, tolerance class, attachment, size and thickness; matching these values to the holder specification ensures correct fit and secure clamping for the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160404 AH110 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH110 grade and the proven VNMG rhombic geometry to achieve reliable, sharp cutting performance and consistent chip control in turning applications; order directly via Metav Werkzeuge or consult our advisors for optimised tool selection. VNMG160404 AH110 — ISO rhombic turning insert, PVD-coated cemented carbide by Tungaloy A VNMG160404 AH110 ISO rhombic turning insert designed for external and internal turning, offering a sharp cutting edge, process security and compatibility with ISO-standard holders. PVD-coated AH110 for wear resistance Rhombic VNMG shape for versatile turning Double-sided chipbreaker for stable chip control 0° clearance angle for predictable cutting Durable cutting edge for extended performance The combination of a PVD-coated surface with a cemented carbide substrate in the AH110 grade ensures enhanced wear resistance and improved edge stability during turning. This grade is formulated to resist both gradual abrasion and sudden chipping, making it suitable where a consistently sharp cutting edge and high process reliability are required. The coating reduces adhesion and thermal impact at the cutting zone, which translates into longer insert life and fewer interruptions in production. These characteristics support uninterrupted machining cycles and more predictable replacement intervals. Clear guidance on compatibility and holder selection Compatibility with the chosen holder is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. As an ISO-standard insert, the VNMG160404 follows established dimensions and locating features, simplifying selection for existing toolholders and boring bars. When integrating the insert into a system, check the holder’s seat geometry and the clamp type; correct matching prevents movement during cutting and preserves the expected cutting data. The standardized designation streamlines procurement and reduces the risk of mismatched components in mixed-tool inventories. Stable chip control and process security The insert’s double-sided chipbreaker and a 0° clearance angle promote consistent chip formation and evacuation, reducing the likelihood of built-up edge and uneven cutting forces. The AH110 composition emphasises both wear- and breakage-resistance, which supports steady machining under varying process conditions. For optimal results, pair the chipbreaker style and grade selection with the workpiece material and the intended cutting strategy—this approach minimises rework, enhances surface finish and maintains cycle-time stability across batch runs. Practical dimensions and system setup for straightforward use Key geometry features contribute to handling and mounting: corner radius 0.4 mm, plate thickness 4.76 mm, and a cylindrical locating hole for secure fastening. The rhombic plate form and a 35° orientation support a wide range of turning operations, from light finishing passes to more robust turning with controlled depths of cut. Typical system assembly comprises the ISO insert, a compatible external holder or boring bar, a support pad/clamping set and replacement clamp screws; this modular approach facilitates fast index changes and predictable seating in production environments. For reliable turning performance with Tungaloy AH110-grade inserts and fast supply from Metav Werkzeuge, contact Metav Werkzeuge for tailored tool recommendations and procurement assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809420 SKU: 6809420-Tungaloy Manufacturer SKU: TUN6809420 Facts Size: 16 mm Corner radius: 0.4 mm Thickness: 4.76 mm Cutting angle: 35° Clearance angle: 0° Special features Grade/coating: AH110, PVD-coated cemented carbide Plate form: rhombic (VNMG) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning System components: ISO insert, holder/boring bar, support pad/clamping set, replacement screws FAQ Which operations are appropriate for this insert? The VNMG160404 AH110 is intended for external and internal turning; the combination of rhombic geometry and AH110 grade supports both finishing and medium-turning tasks when the chipbreaker and cutting parameters are chosen to match the workpiece. How is holder compatibility ensured? Compatibility is determined by matching the insert’s form, clearance angle, tolerance class, fastening method, size and thickness to the holder. The ISO VNMG designation simplifies selection for compatible external holders and boring bars. What are the key dimensions to check before ordering? Important dimensions include the 16 mm plate size, 4.76 mm thickness and 0.4 mm corner radius, plus the presence of the cylindrical locating hole and the 35° orientation that define seating and clamp requirements. Does the AH110 grade resist chipping and wear? Yes. The AH110 composition, combined with the PVD coating, is formulated to provide both wear resistance and breakage resistance, giving a stable cutting edge and improved process security in turning operations. Is the insert indexable and reversible? The insert features a double-sided chipbreaker and is designed for indexing; flipping and re-indexing are possible within the limits of the geometry and when the clamping system is correctly configured. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 and a precise SS chipbreaker for dependable turning performance; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. VNMG 160404 AH120 — VNMG160404-SS for Turning by Tungaloy The VNMG160404-SS AH120 is an ISO-standard, rhombic indexable insert designed for external and internal turning, offering a wear-resistant PVD-coated carbide grade for demanding, process-secure machining. ISO rhombic insert VNMG160404-SS PVD-coated carbide grade AH120 SS chipbreaker for controlled chips 0.4 mm corner radius for fine finish Consistent productivity with wear-resistant PVD coating The PVD-coated carbide composition and AH120 grade deliver a balanced combination of hardness and toughness that supports stable cutting edge life under continuous production conditions. This translates into fewer interruptions for insert changes and more repeatable cycle times. The PVD layer increases wear resistance while preserving a sharp cutting edge, which is particularly advantageous when process security and dimensional consistency are priorities in turning operations. Predictable chip control and surface quality Equipped with an SS chipbreaker, the insert promotes reliable chip formation and evacuation during both external and internal turning. The 0.4 mm corner radius contributes to improved surface finish without sacrificing edge strength, making the insert suitable for finishing and semi-finishing passes where both geometry and surface integrity matter. Selecting the correct chipbreaker and grade according to workpiece material and machining stability optimises efficiency and reduces rework risk. ISO compatibility and straightforward toolholder selection As an ISO-standard indexable insert, fitment to a suitable holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic VNMG shape with a cylindrical hole ensures secure clamping and simple indexing in compatible VNMG holders or boring bars. The insert’s 4.76 mm thickness and 16 mm size provide mechanical stability for a wide range of turning tasks, while the 35° approach geometry supports favourable cutting forces in many setups. For professional turning results with Tungaloy’s AH120 grade and SS chipbreaker, contact Metav Werkzeuge for tailored advice and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6815133 Manufacturer SKU: TUN6815133 SKU: 6815133-Tungaloy Label: VNMG160404-SS AH120 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Thickness: 4.76 mm Plate size: 16 mm Lead/approach angle: 35° Clearance angle: 0° ISO designation: 160404 Special features Material: carbide Coating: PVD Grade: AH120 Chipbreaker: SS Shape: rhombic Hole style: cylindrical hole Application: turning (external and internal) Compatibility: ISO-standard holders FAQ What machining tasks suit this insert best? The VNMG160404-SS AH120 insert is designed for external and internal turning where a combination of a sharp cutting edge and process security is required, making it appropriate for finishing and semi-finishing operations. How does the SS chipbreaker affect performance? The SS chipbreaker on the VNMG160404-SS promotes controlled chip formation and evacuation, improving reliability in continuous turning operations and reducing the risk of built-up edge. What are the dimensional highlights to check for holder compatibility? Check the insert’s 16 mm size, 4.76 mm thickness and ISO 160404 designation; compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness. What does the AH120 grade contribute to machining? The AH120 grade provides a wear-resistant, PVD-coated carbide substrate that balances edge sharpness with resistance to chipping, supporting consistent tool life in production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160404 AH120 Wendeplatten - Tungaloy
VNMG 160404 AH120 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG160404-TSF AH120 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für prozesssichere Bearbeitung mit scharfer Schneidkante und stabiler Spanbildung. ISO-genormt und kompatibel zu gängigen Außenhaltern PVD-beschichtetes Hartmetall für lange Standzeit TSF-Spanbrecher für kontrollierte Spanbildung Rhombische Plattenform mit zylindrischem Loch Freiwinkel 0° und Eckenradius 0,4 mm Hohe Prozesssicherheit durch verschleißarme Sorte Die AH120-Sorte bietet eine verschleiß- und ausbruchfeste Kombination aus Korpus und PVD-beschichtetem Hartmetall, die speziell für das Drehen entwickelt wurde. Durch die harte Beschichtung bleibt die Schneidkante länger scharf, was die Rüstzyklen reduziert und die Maschinenauslastung erhöht. Anwender profitieren von gleichbleibenden Ergebnissen bei längeren Standzeiten und stabiler Bearbeitung. Präzision und einfache Integration in ISO-Systeme Dank der ISO-Genormung lässt sich die Platte zuverlässig mit passenden Außenhaltern und Bohrstangen kombinieren. Die rhombische Form mit zylindrischem Loch und der definierte Freiwinkel 0° gewährleisten exakte Positionierung und Wiederholgenauigkeit. Der Eckenradius von 0,4 mm sorgt für eine gute Kantenschärfe bei gleichzeitig kontrollierter Kantenbelastung. Angepasste Spanformung für vielfältige Werkstoffe Der integrierte TSF-Spanbrecher ist auf stabile Spanabfuhr ausgelegt und unterstützt eine breite Werkstoffabdeckung. Bei wechselnden Schnittbedingungen ermöglicht die Sorte zuverlässige Spankontrolle, wodurch Nacharbeit reduziert und die Produktion produktiver gestaltet wird. Für Anwender ohne tiefgehende Beschichtungskenntnisse: PVD steht für Physical Vapor Deposition und beschreibt ein dünnes, hartes Schichtsystem zur Erhöhung der Verschleißfestigkeit. Wirtschaftlichkeit durch längere Standzeit und Prozessruhe Die Kombination aus geometrischer Stabilität und verschleißarmer Sorte führt zu weniger Werkzeugwechseln und kalkulierbareren Fertigungszeiten. Kleine Rüstverluste summieren sich zu spürbaren Effizienzgewinnen im Serienbetrieb. Werkstätten, die auf zuverlässige, wiederholgenaue Ergebnisse setzen, erzielen mit dieser Platte konstante Oberflächenqualität bei reduziertem Stillstand. Für produktive Zerspanung empfiehlt sich die AH120-Sorte von Tungaloy; Angebot und technische Beratung gerne per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Technische Daten Artikelnummer: 6854308 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160404-TSF Fakten Plattengröße: 16 Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Besonderheiten Material: Hartmetall Sorte: AH120 Schneidstofftyp: PVD-beschichtetes Hartmetall (Physical Vapor Deposition) Spanbrecher: TSF Plattenform: rhombisch Einsatz: Drehen, Außen- und Innendrehen ISO-genormt Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke bestimmen Halterpassung FAQ Welche Aufgaben löst die VNMG160404-TSF AH120 am besten? Die VNMG160404-TSF AH120 von Tungaloy ist ideal für Außen- und Innendrehen, wenn Prozesssicherheit und eine scharfe Schneidkante gefragt sind. Sie kombiniert PVD-beschichtetes Hartmetall mit einem TSF-Spanbrecher für stabile Spanbildung. Für welche Werkstoffe eignet sich die Platte? Die AH120-Sorte ist breit anwendbar und wurde für verschleißarme Bearbeitung konzipiert. In Kombination mit passender Schnittwertauswahl lassen sich Stahl, legierte Werkstoffe und ähnliche Materialien wirtschaftlich bearbeiten. Wie beeinflusst der Eckenradius 0,4 mm die Bearbeitung? Ein Eckenradius von 0,4 mm bietet eine gute Balance zwischen Kantenschärfe und Stabilität, reduziert Kantenbruch und ermöglicht saubere Konturen bei typischen Drehanwendungen. Gibt es spezielle Hinweise zur Halterkompatibilität? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. ISO-Genormung erleichtert die Auswahl des passenden Außenhalters oder der Bohrstange. Ist die Platte für Hochgeschwindigkeitsbearbeitung geeignet? Die Kombination aus PVD-Beschichtung und stabiler Geometrie unterstützt erhöhte Schnittbedingungen; konkrete Schnittdaten sollten jedoch an Werkstückmaterial und Spanbruchbedingung angepasst werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160404 AH120 Wendeplatten - Tungaloy
VNMG 160404 AH120 Drehwendeschneidplatte zum Drehen von Tungaloy Die VNMG160404-TM AH120 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, ausgelegt auf Prozesssicherheit und verschleißarme Zerspanung mit PVD-beschichtetem Hartmetall. PVD-beschichtetes Hartmetall für lange Standzeit Verschleiß- und ausbruchfest durch AH120-Sorte Rhombische Plattenform 16 mm, Radius 0,4 Zylindrisches Loch für sichere Befestigung FreiWinkel 0° und Plattendicke 4,76 mm Hohe Produktivität durch stabile Schneidkante Die Kombination aus PVD-Beschichtung und ausgewähltem Hartmetall sorgt für eine beständige Schneidkantenstabilität, die produktive Prozesse ermöglicht. Ein Vorteil ist die verringerte Notwendigkeit für häufige Nachbearbeitung, denn die AH120-Sorte ist speziell auf verschleiß- und ausbruchfeste Leistung ausgelegt. Damit reduziert sich die Stillstandszeit in der Fertigung, was besonders in Serienprozessen messbaren Mehrwert liefert. Präzise Bearbeitung und Anwendungsfelder beim Drehen Dank der rhombischen Plattenform und des Eckenradius von 0,4 lassen sich sowohl Außen- als auch Innendrehungen mit konstanter Oberflächengüte realisieren. Die Plattenform unterstützt exakte Einstiche und profiliertes Drehen; das macht die Wendeschneidplatte besonders geeignet für allgemeinere Drehanwendungen, bei denen eine scharfe Schneidkante und Prozesssicherheit verlangt werden. Erklärung: Radius bezeichnet den Eckenradius der Schneide, er beeinflusst Oberflächenqualität und Schnittkräfte. Passgenauigkeit, Halterkompatibilität und Systemaufbau Die ISO-Genormung garantiert Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke über Passform entscheiden. Die Platte besitzt ein zylindrisches Loch, das eine sichere Befestigung mit Unterlage oder Klemmsatz ermöglicht. Für Anwender bedeutet das: schneller Wechsel, geringe Rüstzeiten und reproduzierbare Ergebnisse bei wiederkehrenden Einspanvorgängen. Sorte und Spanformer für sichere Spanbildung Die Sorte AH120 ist als PVD-beschichtete Hartmetallsorte konzipiert; das Material bietet hohe Verschleißfestigkeit und gute Kantenstabilität. Der Spanbrecher TM wurde gewählt, um stabile Spanformen bei variablen Schnittbedingungen zu unterstützen. Kurz erklärt: PVD steht für Physical Vapour Deposition, ein Beschichtungsverfahren, das die Oberflächenhärte erhöht und die Standzeit verlängert. Empfehlung: Für eine wirtschaftliche und prozesssichere Zerspanung die Wendeschneidplatte von Tungaloy wählen und technische Beratung bei Metav Werkzeuge anfragen — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6812134 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Typenbezeichnung: VNMG160404-TM AH120 Daten Eckenradius: 0,4 mm Plattengröße: 16 mm Plattendicke: 4,76 mm Winkel: 35° FreiWinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH120 — verschleiß- und ausbruchfest Spanbrecher: TM — stabiler Spanformer Plattenform: Rhombisch Loch: zylindrisches Loch Anwendung: Drehen ISO-Genormt — kompatibel mit gängigen Haltern FAQ Wie erkennt man die Kompatibilität mit dem Halter? Die Kompatibilität richtet sich nach Form, FreiWinkel, Toleranzklasse, Befestigung, Größe und Dicke; die VNMG160404-TM AH120 von Tungaloy passt zu ISO-konformen Außenhaltern und Bohrstangen, SKU TUN6812134 erleichtert die eindeutige Zuordnung. Für welche Werkstoffe ist die Platte geeignet? Die Platte ist aus Hartmetall mit PVD-Beschichtung; die Sorte AH120 ist ausgelegt für verschleißarme Bearbeitung und bietet breite Werkstoffabdeckung für typische Stahl- und Gussbearbeitungen beim Drehen. Welche Vorteile bietet der Spanbrecher TM? Der TM-Spanbrecher unterstützt eine kontrollierte Spanbildung und reduziert Spanverwicklungen, wodurch die Prozessstabilität bei der Verwendung der VNMG160404-TM AH120 signifikant erhöht wird. Wie wirkt sich der Radius 0,4 auf die Bearbeitung aus? Ein Eckenradius von 0,4 mm liefert eine gute Balance zwischen Schnittstabilität und Oberflächengüte; er ist geeignet für allgemeine Drehanwendungen, bei denen sowohl Standzeit als auch Oberflächenanspruch wichtig sind. Ist die Platte für Innen- und Außenbearbeitung einsetzbar? Ja, die VNMG160404-TM AH120 ist für Außen- und Innendrehen vorgesehen und eignet sich in Kombination mit passenden Haltern für vielseitige Anwendungen in der Zerspanung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160404 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp yet stable cutting edge and consistent chip control for reliable rostfreier Stahl turning; the combination of a PVD-coated carbide grade and a 0.4 mm corner radius ensures efficient medium machining under variable conditions. Order the insert directly via Metav Werkzeuge or request advice from the consultants. VNMG160404-TM AH6225 ISO turning insert — PVD-coated carbide, 0.4 mm radius — Tungaloy The VNMG160404-TM AH6225 is an ISO rhombic turning insert designed for external and internal turning of rostfreier Stahl with a cylindrical hole for secure clamping PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl turning 0.4 mm corner radius for consistent finishes Rhombic ISO insert with cylindrical hole Consistent performance for rostfreier Stahl with a universal grade The PVD-coated carbide grade AH6225 is formulated as a universal choice for machining rostfreier Stahl, offering a balance between a sharp cutting edge and sufficient edge stability for medium machining operations. This composition supports repeatable results when cutting conditions vary, reducing the risk of premature flank wear while maintaining good surface quality. The combination of a sharp geometry and a robust substrate provides a dependable option for shops seeking predictable tool life and process stability. Reliable edge geometry and effective chip control A corner radius of 0.4 mm combined with the TM chipbreaker promotes controlled chip formation and evacuation during turning, which directly improves surface finish and reduces the likelihood of built-up edge when machining sticky alloys. The insert's 0° rake angle and rhombic geometry contribute to predictable cutting forces and a favourable contact pattern at the tool edge. These characteristics simplify process parameter selection and help maintain part tolerances across short production runs and finishing passes. Designed for secure mounting and broad ISO compatibility The insert follows ISO norms for shape and size, featuring a cylindrical hole and an inscribed circle size of 16 mm with a plate thickness of 4.76 mm, enabling compatibility with a wide range of ISO holders and boring bars. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct seat and clamping force, preventing movement during heavy cuts. Labelling and ISO coding facilitate straightforward replacement and inventory management in production environments. Practical benefits in workshop applications and process reliability As a universal turning grade intended for medium machining, this PVD-coated insert supports a wide material coverage and delivers stable chip formation under mixed cutting conditions, which reduces secondary operations and scrap. The insert suits both external and internal turning tasks where consistent results and tool-change simplicity are priorities. Paired with suitable coolant and holder rigidity, the geometry and coating help extend effective tool life and contribute to a more productive turning cycle with fewer interruptions. For tailor-made cutting recommendations or to order the VNMG160404-TM AH6225 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; consultants are available to advise on holder matching and process parameters. Technical data Manufacturer article number: 6903234 SKU: 6903234-Tungaloy Manufacturer SKU: TUN6903234 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Rake angle: 0° Included angle: 35° ISO code: 160404 Special features Coating / grade: AH6225 Material: Hartmetall (carbide) Chipbreaker: TM Plate shape: Rhombic Hole: with cylindrical hole Application: Turning (Drehen) Typical use: External and internal turning on rostfreier Stahl FAQ What materials is this insert intended for? The VNMG160404-TM AH6225 is optimised for machining rostfreier Stahl and performs well across a broad range of stainless alloys thanks to its PVD-coated carbide grade. Which operations suit this insert best? This ISO rhombic insert is intended for external and internal turning; its geometry and chipbreaker suit medium machining where surface finish and process stability are required. How does the TM chipbreaker affect machining? The TM chipbreaker on the VNMG160404-TM AH6225 promotes controlled chip formation and evacuation, improving surface finish and reducing built-up edge during rostfreier Stahl turning. What clutching and holder features are required for compatibility? Compatibility is achieved when holder form, clearance angle, tolerance class, fastening method, size and thickness match the ISO insert; the cylindrical hole secures clamping in standard ISO holders. What effect does the 0.4 mm corner radius have on results? A 0.4 mm corner radius balances edge strength and finish quality, giving reliable tool life while enabling smooth finishes in medium turning applications with the AH6225 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com