WNMG 060408 T9215 Wendeplatten - Tungaloy
WNMG 060408 T9215 Wendeplatte für Drehen von Tungaloy Die WNMG060408 T9215 ist eine ISO-genormte Wendeplatte für das Drehen, ausgelegt für produktive Bearbeitung mittlerer Stahlqualitäten WNMG060408 ISO-Wendeplatte, trigonform CVD-beschichtetes Hartmetall T9215, hohe Standzeit Doppelseitiger Spanbrecher für konstante Spanform Zylindrisches Loch, einfache Montage im Halter Freiwinkel 0° und Eckradius 0,8 für stabile Schnitte Effiziente Prozessleistung für standardisierte Dreharbeiten Die Kombination aus CVD-beschichtetem Hartmetall und der speziell formulierten Sorte T9215 sorgt für eine ausgewogene Mischung aus Verschleißfestigkeit und Bruchsicherheit. Dadurch lassen sich Schnittparameter höher ansetzen, ohne die Standzeit unverhältnismäßig zu reduzieren. Anwender profitieren von reduzierten Werkzeugwechseln und gleichbleibender Teilequalität, was die Produktivität in Chargenfertigungen merklich erhöht. Die Platte ist für kontinuierlichen bis leicht unterbrochenen Schnitt ausgelegt und unterstützt so stabile Prozessläufe. Werkstoffkompetenz und technischer Nutzen Bei der Bearbeitung von Stahl zeigt die Platte ihre Stärken: Die Beschichtung bietet Schutz gegen Abrasion, während das Substrat die notwendige Zähigkeit liefert. Dadurch entsteht eine zuverlässige Schneidkante, die wiederholgenau arbeitet. Für Anwender ohne vertiefte Schneidstoffkenntnisse: CVD-Beschichtung bedeutet eine harte, verschleißresistente Schicht, die besonders bei abrasiven Bedingungen die Standzeit erhöht. Die trigonförmige Plattengeometrie ermöglicht zudem flexible Einstellwinkel am Außenhalter und trägt zur Schnittstabilität bei. Einsatzfelder, Montage und Praxishinweise Die Wendeplatte eignet sich primär für Außen- und Innendrehen von mittel gehärteten Stählen; die Wahl des passenden Spanbrechers richtet sich nach Werkstoff und Schnittart. Durch das zylindrische Loch ist die Montage in gängigen ISO-Haltern einfach und formstabil. Anwender sollten Halter mit passender Toleranzklasse und Freiwinkel verwenden, damit die volle Performance der Platte erreicht wird. Bei leicht unterbrochenem Schnitt empfiehlt sich eine moderate Vorschubanpassung, um Bruchrisiken zu minimieren. Empfehlung: Für wirtschaftliche Dreharbeiten die WNMG060408 T9215 von Tungaloy wählen und bei Detailfragen die technische Beratung von Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6772395 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408 Hersteller-SKU: TUN6772395 Fakten Plattengröße: 06 Plattendicke: 4,76 Eckenradius: 0,8 Freiwinkel: 0° Winkel: 80° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 (für mittlere Stahlbearbeitung) Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Ist die Wendeplatte für Innen- und Außendrehen geeignet? Die WNMG060408 T9215 von Tungaloy ist für Außen- und Innendrehen ausgelegt; durch die trigonförmige Geometrie lässt sich die Platte in gängigen ISO-Haltern einsetzen, SKU TUN6772395. Für welche Werkstoffe ist die Sorte T9215 optimiert? Die Sorte T9215 ist erste Wahl für die mittlere Stahlbearbeitung; das CVD-beschichtete Hartmetall kombiniert Verschleißwiderstand mit Bruchsicherheit für kontinuierliche Schnitte. Welche Vorteile bietet das zylindrische Loch? Das zylindrische Loch erleichtert die präzise Positionierung und formschlüssige Befestigung im Halter, was die Wiederholgenauigkeit beim Einsatz der WNMG060408 T9215 erhöht. Wie beeinflusst der Freiwinkel 0° die Bearbeitung? Ein Freiwinkel von 0° unterstützt stabile Schneidbedingungen bei planparallelen Anstellungen und reduziert Vibrationen bei höheren Schnittkräften. Wann ist der doppelseitige Spanbrecher empfehlenswert? Der doppelseitige Spanbrecher bietet konstante Spanform und eignet sich besonders bei mittleren Schnittparametern und wechselnden Spanvolumen, wie es bei Serienfertigung häufig vorkommt. für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide and a trigon form to maintain consistent productivity in medium steel turning. The T9215 grade offers elevated wear resistance with reliable fracture toughness while the 0.8 mm corner radius and double-sided chipbreaker support stable cutting and predictable chip control. Order directly via Metav Werkzeuge or consult our technical advisers for optimisation. WNMG 060408 T9215 — WNMG Turning Insert (CVD-coated, 0.8 mm radius) by Tungaloy A WNMG060408 T9215 is an ISO-standard turning insert designed for general external and internal turning, offering a balance of wear resistance and toughness for medium steels. CVD-coated carbide grade T9215 For medium steel machining Trigon WNMG geometry, 80° cutting angle 0.8 mm corner radius, double-sided chipbreaker Consistent productivity for medium-steel turning The combination of a CVD-coated surface and a carbide substrate delivers a predictable tool life in continuous and lightly interrupted cut conditions. The coating reduces flank wear and helps maintain dimensional accuracy over longer tool cycles, which lowers the cost per finished component. For production environments this means fewer indexings and less variation in part quality, promoting uninterrupted machining and stable output. Geometry engineered for stability and chip control The trigon-shaped insert with an 80° cutting angle and a 0.8 mm corner radius provides a robust cutting edge that resists chipping during axial and radial loads. The double-sided chipbreaker supports consistent chip formation, improving surface finish and minimising heat concentration at the cutting edge. These geometric choices translate into longer tool life and fewer process interruptions when turning steels of medium hardness. Material and grade: balanced wear resistance and toughness The grade T9215 is a CVD-coated carbide developed for general-purpose steel machining; it combines enhanced wear resistance with fracture safety, making it a first choice for shops needing both performance and reliability. The coating improves oxidation and abrasive wear resistance while the carbide core sustains the mechanical loads of interrupted or heavy cuts, helping to avoid premature edge failure and unexpected scrap rates. System compatibility and workshop integration The insert follows ISO conventions for shape, clearance angle, tolerance class, clamping and thickness, so compatibility with standard external holders and boring bars is straightforward when matching those parameters. The plate thickness of 4.76 mm, the cylindrical hole and the trigon form make mounting rapid and repeatable. Using ISO-matched toolholders and the correct clamping hardware reduces set-up time and ensures consistent tool positioning across multiple machines. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy turning inserts — for specification support email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 6772381-Tungaloy Manufacturer SKU: TUN6772381 Manufacturer article number: 6772381 Model series: ISO turning indexable inserts Facts Plate designation: WNMG060408 Grade/coating: T9215 (CVD-coated) Material: carbide Plate size: 06 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 80° Hole: with cylindrical hole Plate form: trigon Chipbreaker: double-sided Special features Application: Turning (external and internal) Typical use: medium steel machining Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness ISO-standardised geometry for straightforward holder matching FAQ What materials is this insert best suited for? The WNMG060408 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide balances wear resistance and toughness for continuous and lightly interrupted cuts. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing heat build-up during turning operations. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO conventions for shape, clearance angle, thickness and clamping; matching those parameters ensures proper fit in ISO-compatible external holders and boring bars. How many useful cutting edges does the insert provide? As a double-sided trigon insert, the WNMG060408 offers multiple indexable edges, enabling efficient rotation of edges to extend service life before replacement. Can this grade handle occasional interrupted cuts? The T9215 grade provides good fracture toughness alongside wear resistance, making it suitable for moderate interrupted cutting scenarios while maintaining productive tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a robust trigon form to achieve stable, high-productivity turning in medium steels; the 0.8 mm corner radius and secure through-hole clamping ensure repeatable results in both external and internal operations. Order directly via Metav Werkzeuge or contact the consultants for application advice. WNMG 060408 T9215 — Trigon turning insert (CVD-coated carbide) by Tungaloy The WNMG060408 T9215 is a trigon ISO turning insert optimised for medium steel machining, designed for external and internal turning with a double-sided chipbreaker and cylindrical through-hole for reliable clamping CVD-coated carbide for medium steel Trigon form, 06 size, 0.8 mm radius Double-sided chipbreaker, two usable edges Cylindrical through-hole, secure clamping Consistent cutting performance for medium steel applications The CVD-coated carbide grade T9215 combines high wear resistance with sufficient fracture toughness, making it an efficient choice for continuous to lightly interrupted turning of medium steels. The coating reduces flank and crater wear under typical turning conditions, which supports longer tool life and steadier component quality. Selecting this insert helps maintain cycle times and surface finish while reducing the frequency of indexings, resulting in measurable productivity gains on series and job-shop production. Geometry and clamping for secure, repeatable setups The trigon geometry (shape designation WNMG060408) and the 06 size provide stable seating in ISO-compatible holders; the insert thickness of 4.76 mm and the cylindrical through-hole ensure positive clamping and repeatable positioning. The 0° clearance angle and the specified wedge angle of 80° deliver predictable cutting engagement and tool projection behaviour. Compatibility with a holder depends on form, free angle, tolerance class, fastening and size — verify these parameters when matching the insert to an external holder or boring bar to guarantee optimal performance. Chip control and economic machining with a double-sided chipbreaker The insert features a double-sided chipbreaker, offering two usable cutting edges for economical indexing. The chipbreaker geometry is tuned for stable chip formation in steel, promoting effective evacuation and reducing the risk of built-up edge. As an indexable insert, maintenance is limited to periodic indexing or replacement, lowering operating costs compared with single-point tooling. For best results, match the chipbreaker and grade to workpiece material, cutting parameters and the machine-tool rigidity to exploit the full benefit of the insert’s balance between wear resistance and toughness. Contact Metav Werkzeuge for tailored application support and to secure the Tungaloy WNMG060408 T9215 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773910 Manufacturer SKU: TUN6773910 Our SKU: 6773910-Tungaloy Model series: ISO-Drehwendeschneidplatten Shape designation: WNMG060408 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 06 Clearance angle: 0° Wedge angle: 80° Special features CVD-coated carbide (T9215) Trigon insert, double-sided chipbreaker With cylindrical through-hole for clamping For external and internal turning Compatibility with ISO holders; check form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert optimised for? The Tungaloy WNMG060408 T9215 insert is optimised for medium steel machining; the CVD-coated carbide T9215 grade balances wear resistance and fracture toughness for productive turning of steel. How many cutting edges are available per insert? The trigon form with a double-sided chipbreaker provides two usable cutting edges per indexable side, enabling economical indexing before replacement. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the WNMG060408 form fits standard ISO external holders and boring bars when these parameters match. Is the insert suitable for interrupted cuts? The CVD-coated T9215 grade is suitable for continuous to lightly interrupted cuts; for heavy interruptions, select a grade and chipbreaker tailored to higher impact conditions. What clamping feature does the insert use? This insert is supplied with a cylindrical through-hole that secures positive clamping in compatible ISO holders, supporting repeatable seating and stable cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215, a 0.8 mm corner radius and ISO conformity to achieve consistent, high-productivity turning in medium steels; order the WNMG060408 directly via Metav Werkzeuge or consult our specialists for grade selection. WNMG 060408 T9215 indexable insert for turning — Tungaloy The WNMG060408 T9215 is a trigon indexable insert engineered for medium-steel turning, offering robust wear resistance and reliable chip control for continuous to slightly interrupted cuts. ISO-standard trigon insert 06 designation CVD-coated carbide T9215 for medium steel 0.8 mm corner radius for robust edge strength Double-sided chipbreaker with cylindrical hole High-performance grade for productive medium-steel turning The CVD-coated carbide grade T9215 combines wear resistance and fracture toughness to support higher metal removal rates in the machining of medium steels. As an ISO-standard trigon insert, this solution provides a reproducible cutting performance and predictable tool life, which helps to reduce cycle-time variation and improve throughput. Performance benefits are evident when paired with stable setups and consistent cutting parameters, making the insert a pragmatic choice for production-focused turning operations. Compatibility and secure clamping for dependable machining Compatibility with the toolholder is determined by form, free angle, tolerance class, fastening method, size and thickness. The trigon geometry and the cylindrical hole require matching clamping components such as a correctly profiled outer holder or a compatible boring bar, plus the appropriate shim and clamping screws. Ensuring correct holder compatibility delivers repeatable seating, minimises micro-movement at the cutting edge and extends usable life of both insert and holder, which supports process reliability on the shop floor. Geometry optimised for stability and surface finish The insert’s 0.8 mm corner radius and 80° cutting edge configuration offer a balance between edge strength and achievable surface quality. The 0° relief angle and a plate thickness of 4.76 mm contribute to a rigid cutting geometry that reduces deflection under load. The double-sided chipbreaker assists chip formation and evacuation, reducing the risk of built-up edge and improving surface finish during external and internal turning tasks. For operators less familiar with geometry terms: a larger corner radius increases edge durability, while the chipbreaker contours shape chips to clear the cutting zone efficiently. Practical guidance for process selection and productivity This grade is recommended for continuous to slightly interrupted turning of medium steels and performs best with stable fixturing and appropriate cutting data. Select the chipbreaker and insert size in line with workpiece rigidity and tool overhang; reduced overhang and increased clamping torque improve tool life. Regularly inspect seats and screws for wear and replace inserts at the first sign of chipping to maintain consistent part quality. Combining the T9215 grade with controlled cutting parameters yields repeatable results and lowers overall machining costs through longer tool life and fewer unplanned tool changes. For tailored advice on integrating the Tungaloy T9215 inserts into production, contact Metav Werkzeuge for grade matching and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772405 Manufacturer SKU: TUN6772405 Supplier SKU: 6772405-Tungaloy Product label: WNMG060408 T9215 Tungaloy-Wendeplatte Core specifications Size designation: 06 ISO code: 060408 Corner radius: 0.8 mm Thickness: 4.76 mm Cutting edge angle: 80° Relief angle: 0° Materials and features Material: carbide Coating/grade: CVD-coated carbide T9215 Shape: trigon Hole: cylindrical hole Chipbreaker: double-sided Series: ISO-Drehwendeschneidplatten Application: Turning Typical use: external and internal turning FAQ Which materials is this grade intended for? The WNMG060408 T9215 indexable insert from Tungaloy is primarily intended for medium-steel turning, where the CVD-coated T9215 grade provides a balance of wear resistance and toughness. How is holder compatibility determined? Compatibility depends on form, free angle, tolerance class, fastening, size and thickness; the insert seats in a matching outer holder or boring bar and requires the correct shim and clamping screws for secure fixation. Can the insert handle interrupted cuts? Yes, the T9215 grade is suited for continuous to slightly interrupted cuts; for heavy interruptions, select a geometry and grade designed specifically for high-impact conditions. What chip control can be expected from this insert? Chip control is achieved by the double-sided chipbreaker and the insert’s geometry, which together shape and evacuate chips effectively, supporting improved surface finish and reduced risk of built-up edge. What advantages does the 0.8 mm corner radius deliver? A 0.8 mm corner radius increases edge strength and resistance to chipping, improving tool life in production applications while still allowing acceptable surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9215 Wendeplatten - Tungaloy
WNMG060408-TM T9215 — ISO-Drehwendeschneidplatte für Drehen | Tungaloy Die WNMG060408-TM T9215 ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für produktives Außen- und Innendrehen in der mittleren Stahlbearbeitung CVD-beschichtetes Hartmetall T9215 Für mittlere Stahlbearbeitung optimiert Trigon-Form für stabile Schneidposition Eckenradius 0,8 mm für gute Oberflächengüte Mit zylindrischem Loch für sichere Klemmsitze Präzise Hartmetalllösung für produktive Stahlzerspanung Die WNMG060408-TM T9215 kombiniert CVD-beschichtetes Hartmetall mit einer Sorte, die speziell auf mittlere Stahlqualitäten ausgelegt ist. Dadurch entsteht ein ausgewogenes Verhältnis von Verschleißwiderstand und Bruchsicherheit, was die Standzeit in Serien- und Einzelteilfertigung deutlich erhöht. Anwender profitieren von konstanter Bearbeitungsleistung bei kontinuierlichem bis leicht unterbrochenem Schnitt. Fachbegriffe wie CVD bedeuten hier eine chemische Dampfabscheidung, die die Schneidkante schichtbildend gegen Wärme und Abrieb schützt. Kompatibilität und Systemaufbau für einfache Integration Die Platte ist ISO-genormt und passt in gängige Außenhalter und Bohrstangen, wobei die Kompatibilität durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt wird. Die trigonale Plattenform sorgt für stabile Lagerung und mehrere Nutzkanten. Der Freiwinkel 0° reduziert den Eingriffswinkel und unterstützt eine ruhige Schnittführung bei gesteigerter Produktivität. Hinweis: Bei der Auswahl des Halters auf die passende Toleranzklasse und die korrekte Unterlage achten, um Wiederholgenauigkeit und Spannstabilität sicherzustellen. Zielanwendung und Anwenderkreis kurz erklärt Diese Wendeplatte ist ideal für Fertigungsbetriebe, die mittlere Stähle effizient und reproduzierbar bearbeiten möchten. Typische Anwender sind Lohnfertiger, Maschinenbaubetriebe und Serienfertigungen, die Wert auf Prozesssicherheit und konstante Oberflächengüten legen. Für Fälle mit leicht unterbrochenem Schnitt bietet die Sorte T9215 eine gute Balance zwischen Zähigkeit und Verschleißfestigkeit, wodurch Ausschuss reduziert und Werkzeugwechselintervalle verlängert werden. Spanbildung, Radius und Wirkung auf die Oberfläche Der Eckenradius von 0,8 mm sorgt für eine belastbare Schneidkante und beeinflusst die erreichbare Oberflächengüte positiv. In Kombination mit dem TM-Spanbrecher entsteht eine kontrollierte Spanform, die Spankontrolle und Kühlschmierstoffabführung verbessert. Das Ergebnis sind gleichmäßigere Oberflächen und geringere Nacharbeit. Für empfindliche Oberflächen kann durch Auswahl des passenden Radius oder eines anderen Spanformers weiter optimiert werden. Wir empfehlen die WNMG060408-TM T9215 von Tungaloy wegen ihrer hohen Produktivität und Prozesssicherheit; bei technischen Fragen steht Metav Werkzeuge gerne zur Verfügung: info@metav-werkzeuge.com · +49 2822 7131930 Produktmerkmale Artikelnummer: 6772398 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Fakten Radius / Eckenradius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 06 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Dampfabscheidung) Sorte: T9215 Spanbrecher: TM (Spanformer für stabile Spanbildung) Plattenform: Trigon Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Wendeplattenbezeichnung: WNMG060408-TM FAQ Was ist die Hauptanwendung dieser Wendeplatte? Die WNMG060408-TM T9215 von Tungaloy ist primär für das Außen- und Innendrehen in der mittleren Stahlbearbeitung konzipiert und eignet sich für kontinuierliche bis leicht unterbrochene Schnitte. Wie wähle ich den passenden Halter für die Platte aus? Auf Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Plattendicke achten; die Kombination bestimmt die Kompatibilität mit der WNMG060408-TM T9215 und gewährleistet korrekte Spann- und Schnittbedingungen. Für welche Werkstoffe ist die Sorte T9215 geeignet? Die Sorte T9215 mit CVD-Beschichtung wurde als erste Wahl für mittlere Stähle entwickelt und bietet eine gute Balance aus Verschleißwiderstand und Zähigkeit. Welche Wirkung hat der Eckenradius 0,8 mm? Ein Eckenradius von 0,8 mm erhöht die Standzeit der Schneidkante und verbessert die Oberflächengüte, da die Belastung auf die Schneide verteilt wird. Warum ist das zylindrische Loch vorteilhaft? Das zylindrische Loch erlaubt eine sichere und reproduzierbare Klemmung im Halter, reduziert Laufspiel und unterstützt eine präzise Wiederholgenauigkeit. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and a robust universal T9225 grade for secure, consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. WNMG 060408 T9225 turning insert — Tungaloy, CVD-coated carbide, 0.8 mm radius WNMG 060408 T9225 turning insert is an ISO-standard indexable cutting insert for external and internal turning, designed for medium to heavy steel machining where interrupted cuts or variable engagement demand increased toughness. CVD-coated carbide grade T9225 Trigon shape WNMG 06 size 0.8 mm corner radius Double-sided chipbreaker Cylindrical hole for secure clamping Consistent performance under mixed cutting conditions The T9225 grade combines CVD-coated surface treatment with a tough carbide substrate to offer a balance of wear resistance and fracture toughness, making it suitable for medium to heavy steel turning. The coating reduces flank wear and helps maintain cutting edge geometry over longer tool life, while the substrate absorbs impact during light interruptions. This yields fewer insert changes and steadier process output, which supports predictable cycle times and higher overall productivity. Secure fit and ISO compatibility for stable machining The trigon format and ISO designation ensure straightforward integration into standard indexable holders; compatibility depends on form, clearance angle, tolerance class, clamping and insert size. The cylindrical hole and standard mounting dimensions provide reliable clamping with matching tooling systems, helping to maintain concentricity and reduce vibration. Clear specifications for thickness and seating enable consistent set-up and repeatable machining results across batches. Edge geometry and chip control that simplify production A 0.8 mm corner radius and a double-sided chipbreaker are optimised for robust chip formation in varied engagement scenarios, improving surface finish and reducing rework. The insert’s 0° clearance and 80° included angle support stable cutting forces on shoulder and profile operations. For users less familiar with coatings, CVD-coated means a chemical vapour deposition layer bonded to the carbide to enhance hardness and thermal resistance, which translates into longer effective edge life in demanding turning tasks. For precise turning requirements, rely on Tungaloy’s WNMG 060408 T9225 indexable insert—contact Metav Werkzeuge for availability and tailored technical guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6780642 Manufacturer SKU: TUN6780642 SKU: 6780642-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: WNMG060408 T9225 Tungaloy Numbers / Core technical data ISO code: 060408 Insert size: 06 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Designs / Special features Trigon plate form CVD-coated carbide (T9225) Double-sided chipbreaker Cylindrical hole for clamping ISO-standard indexable turning insert Suitable for medium to heavy steel turning FAQ Is this insert compatible with standard ISO holders? Compatibility is based on the holder form, clearance angle, tolerance class, clamping style, insert size and thickness; the WNMG 060408 T9225 follows ISO conventions and fits matching WNMG holders. What materials is the grade T9225 intended for? The T9225 grade is a robust universal choice for medium to heavy steel machining where some interruption or variable engagement requires added toughness. How does the CVD coating affect tool life? The CVD-coated layer on this insert enhances thermal and abrasive wear resistance, which typically extends effective edge life in demanding turning operations. Can the insert be indexed on both sides? Yes; this is a double-sided indexable insert, allowing the cutting edge to be rotated or indexed to a fresh edge after wear. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius balances strength and finish: it improves edge robustness for heavy cuts while still enabling acceptable surface quality on general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated T9225 grade combined with ISO compatibility and a 0.8 mm corner radius for dependable medium-to-heavy steel turning. Order directly via Metav Werkzeuge or contact our consultants for tailored application advice. WNMG 060408 T9225 — Turning indexable insert, CVD-coated, trigon, Tungaloy WNMG 060408 T9225 is an ISO-format turning insert for general-purpose external and internal turning in steel, designed for stable chip formation and reliable edge life. CVD-coated carbide T9225 Robust universal grade for steel Double-sided chipbreaker Trigon shape with cylindrical hole Reliable ISO geometry for consistent clamping and positioning The insert follows the ISO WNMG 060408 geometry and is produced for compatibility with standard external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The trigon shape and cylindrical hole ensure secure seat and repeatable positioning, while the 80° included angle and 0° clearance support predictable cutting forces. These characteristics reduce setup variability and support consistent component tolerances in serial production. Durable CVD coating and a grade tuned for interrupted and heavy cuts The CVD-coated T9225 grade is a CVD-treated carbide designed as a robust universal grade for medium-to-heavy steel machining where variable engagement or light interruptions demand extra toughness. The coating enhances wear resistance while retaining substrate toughness, which leads to a longer edge life and stable chip control under fluctuating conditions. For shops seeking fewer tool changes and steady cycle times, this balance of hardness and toughness delivers measurable productivity gains. Practical shop-floor advantages: economy, indexability, and chip control Being double-sided, the insert provides two usable cutting edges per index, reducing tooling consumption and downtime for edge changes. The 0.8 mm corner radius offers improved strength at the nose for roughing passes yet remains suitable for finishing with adjusted feeds. The 4.76 mm thickness contributes to rigidity in the clamped assembly, which helps stability in less rigid setups. Together, these aspects lower overall processing costs while maintaining surface quality and dimensional accuracy. Guidance for selecting chipbreaker and application parameters Choosing the right chipbreaker and cutting data is essential: the double-sided chipbreaker is intended for general turning and helps break chips consistently when paired with appropriate feeds and stable clamping. For interrupted cuts or unstable set-ups, prefer more conservative feeds and ensure the holder provides adequate support. When machining steel, match the feed and depth of cut to the grade’s toughness to exploit the T9225 balance between wear resistance and edge strength; a stable mounting and correctly torqued clamping screw markedly improve performance. For reliable medium-to-heavy steel turning with Tungaloy quality, order the WNMG 060408 T9225 inserts from Metav Werkzeuge or consult our specialists at Metav Werkzeuge for process-adapted recommendations; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical assistance. Technical Data Article number: 6780991 Manufacturer SKU: TUN6780991 Our SKU: 6780991-Tungaloy Model series: ISO turning indexable inserts Designation: WNMG060408 Grade: T9225 Material: CVD-coated carbide Facts Corner radius: 0.8 mm Included angle: 80° Thickness: 4.76 mm Clearance angle: 0° Size: 06 Special features Double-sided chipbreaker Cylindrical hole Trigon insert form Compatible with ISO WNMG holders Application: turning (external and internal) Robust universal grade for medium-to-heavy steel FAQ What materials is this insert suited for? The WNMG 060408 T9225 insert is specified as a robust universal grade for medium-to-heavy steel machining and is best applied where variable engagement or light interruptions occur. How does the T9225 grade improve tool life compared with standard carbides? The T9225 CVD coating increases wear resistance while the carbide substrate preserves edge toughness; this combination sustains cutting performance under fluctuating cutting conditions and extends the interval between indexings. Can this insert be indexed to use multiple cutting edges? Yes, the insert is double-sided, providing two effective cutting edges per index and thus reducing tooling costs and downtime for edge changes. Which geometrical data determine holder compatibility? Compatibility depends on the insert’s form, clearance angle, tolerance class, fixing style, size and thickness—verify these values against the toolholder specifications before assembly. Is the insert suitable for interrupted cuts? The grade and geometry support light to moderate interrupted cuts; the robust universal grade is selected specifically to tolerate occasional disruption in chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
WNMG060408-TM T9225 ISO-Drehwendeschneidplatte für Drehen, Tungaloy Die WNMG060408-TM T9225 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für mittlere bis schwere Stahlbearbeitung WNMG060408-TM T9225 von Tungaloy CVD-beschichtetes Hartmetall für hohe Standzeit Robust bei wechselnden Eingriffsbedingungen Trigonform mit zylindrischem Loch für stabile Befestigung Eckenradius 0,8 mm für präzise Kanten Höhere Produktivität durch belastbare Schneide Mit der WNMG060408-TM T9225 bietet die Wendeplatte eine Kombination aus CVD-beschichtung und verschleißfestem Hartmetall, die gezielt auf produktive Zerspanung abzielt. Durch die erhöhte Zähigkeit der Sorte T9225 lassen sich wechselnde Eingriffsbedingungen und leicht unterbrochene Schnitte sicherer bearbeiten, was die Maschinenlaufzeiten verlängert und Rüstzyklen reduziert. Ein klarer Vorteil für Fertigungen, die konstante Ergebnisse und hohe Auslastung verlangen. Passgenaue Systemintegration für sicheren Einsatz Für optimale Ergebnisse ist die Kompatibilität mit Halter und Klemmsatz entscheidend: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung. Die trigonale Plattenform in Verbindung mit dem zylindrischen Loch sorgt für stabile Spannlage und einfache Montage. Anwender sollten Spanbrecher und Sorte passend zum Werkstoff und zur Bearbeitungsart wählen, um Schnittkräfte zu kontrollieren und die Oberflächengüte zu optimieren. Zielgerichtet für Stahlbearbeitung und wechselnde Schnitte Die Sorte T9225 wurde als robuste Universalsorte für die mittlere bis schwere Stahlbearbeitung entwickelt und bietet gute Balance aus Zähigkeit und Verschleißfestigkeit. Die Eckenradius-Angabe von 0,8 mm ermöglicht präzise Kanten bei Außen- und Innendrehungen, während die Plattendicke 4,76 mm mechanische Stabilität liefert. Zur Erklärung: CVD steht für chemische Gasphasenabscheidung und verbessert die Verschleißfestigkeit der Schneide ohne die Zähigkeit des Substrats übermäßig zu reduzieren. Wir empfehlen die WNMG060408-TM T9225 von Tungaloy zur Ergänzung produktiver Drehprozesse; bei Unsicherheiten oder Bedarf an weiteren technischen Daten steht Metav Werkzeuge gern zur Verfügung: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6780897 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408-TM T9225 SKU: 6780897-Tungaloy Fakten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Winkel: 80° Freiwinkel: 0° Plattengröße: 06 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (chemische Gasphasenabscheidung) Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) Spanbrecher: TM Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen SKU Hersteller: TUN6780897 Hersteller Artikelnummer: 6780897 FAQ Für welche Werkstoffe ist die Wendeplatte geeignet? Die WNMG060408-TM T9225 von Tungaloy eignet sich primär für Stahl und legierte Stähle; die Sorte T9225 bietet dabei gute Zähigkeit für wechselnde Eingriffsbedingungen und leicht unterbrochene Schnitte. Wie beeinflusst die CVD-Beschichtung die Lebensdauer? Die CVD-beschichtete Oberfläche erhöht die Verschleißfestigkeit der Schneide und trägt so zu längeren Standzeiten und stabileren Prozessbedingungen bei. Welche Bedeutung hat der Spanbrecher TM? Der Spanbrecher TM ist für die Spanformung bei Außen- und Innendrehen ausgelegt und hilft, Schnittkräfte zu kontrollieren sowie eine konstante Oberflächengüte zu erreichen. Welche Plattenparameter sind für die Halterwahl entscheidend? Zur Auswahl des passenden Halters sind Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke der Wendeplatte maßgeblich; die WNMG060408-TM hat Trigonform und zylindrisches Loch. Kann die Platte bei leicht unterbrochenen Schnitten eingesetzt werden? Ja, die Sorte T9225 wurde speziell für mittlere bis schwere Bearbeitung und leicht unterbrochene Schnitte entwickelt und liefert hier zuverlässige Performance. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide, a 0.8 mm corner radius and a double‑sided chipbreaker for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult the team for specification advice. WNMG 060408 T9225 Turning Insert by Tungaloy — CVD‑coated carbide, 0.8 mm radius A WNMG060408 indexable turning insert designed for medium to heavy steel turning, offering reliable chip control and stable cutting under variable engagement conditions. CVD‑coated carbide for high process security Suitable for medium to heavy steel turning Trigon shape with 0.8 mm corner radius Double‑sided chipbreaker and cylindrical hole Efficient turning performance that reduces process variability The combination of a CVD‑coated surface and a wear‑resistant carbide substrate delivers a stable cutting edge that tolerates fluctuating engagement and interrupted cuts. This insert grade, T9225, is engineered as a robust universal solution: it balances toughness and hardness to minimise flank wear while maintaining productive metal removal rates. The result is a more predictable cycle time and fewer tool changes; for production environments this translates into improved utilisation of lathes and reduced unplanned downtime. Consistent chip control and surface quality for less rework Equipped with a double‑sided chipbreaker and a precise corner radius 0.8 mm, the insert promotes controlled chip formation and consistent part finish on a range of steels. The geometry reduces the risk of built‑up edge and workpiece damage during moderate to heavy cuts, helping to avoid secondary operations. The trigon form provides three indexed cutting edges, improving economy per insert by enabling quick edge rotation and extended service life. ISO compatibility and simple clamping for repeatable results As an ISO‑standard indexable insert, compatibility with holders is governed by form, clearance angle, tolerance class, fixing style, size and thickness. The indexable insert is supplied with a cylindrical hole for secure mounting in a matching holder or boring bar; when combined with the correct clamping set and replacement screws, the system ensures repeatable seating and concentricity. Specifying the correct holder geometry and clamp reduces setup time and supports consistent part tolerances across production batches. Practical procurement and application guidance for machine shops For turning applications where varying depths of cut or intermittent engagement occur, this Tungaloy grade offers a pragmatic balance of toughness and wear resistance. The insert’s design supports straightforward inventory management: trigon shape with multiple cutting edges reduces frequency of replacements and simplifies tool tracking. If machining priorities emphasise process security and long tool life, this insert delivers a quantifiable benefit in throughput and reduced tooling overhead. For specification advice, sample availability or to order the Tungaloy WNMG060408 T9225 insert for efficient, reliable turning, contact Metav Werkzeuge via info@metav-werkzeuge.com or phone +49 2822 7131930 — the team will provide precise product matching and delivery options. Technical Data Article number: 6797206 SKU: 6797206-Tungaloy Manufacturer SKU: TUN6797206 Model series: ISO‑Drehwendeschneidplatten Designation: WNMG060408 Facts Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 06 Special features Material: carbide (Hartmetall) Coating: CVD Grade: T9225 Chipbreaker: double‑sided Shape: trigon Hole: with cylindrical hole Application: turning System components: compatible holder, clamping set and replacement screws FAQ What materials is this insert best suited to machine? The Tungaloy WNMG060408 T9225 insert is optimised for medium to heavy machining of steel, providing a balance of toughness and wear resistance suited to varying cutting conditions. How many cutting edges are available per insert? The trigon form offers three indexed cutting edges, enabling economical use of the insert before replacement is required. What mounting configuration does the insert use? The insert features a cylindrical hole for secure fixing; compatibility depends on holder form, clearance angle, tolerance class, size and thickness. What is the purpose of the T9225 grade? Grade T9225 is a robust universal grade engineered for stable chip formation and reliable performance in moderately aggressive steel turning applications. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
WNMG 060408 T9225 Wendeplatte Drehen – Tungaloy WNMG 060408 T9225 ist eine ISO-genormte Drehwendeschneidplatte für robustes Außen- und Innendrehen bei mittleren bis schweren Stahleinsätzen ISO-genormte WNMG-Form für universellen Einsatz CVD-beschichtetes Hartmetall für lange Standzeit Doppelseitiger Spanbrecher für flexible Nutzung Zylindrisches Loch für sichere Befestigung Geeignet für mittlere bis schwere Stahlbearbeitung Effiziente Metallbearbeitung bei wechselnden Schnittbedingungen Die WNMG 060408 T9225 bietet eine Kombination aus CVD-Beschichtung und zähem Hartmetall, die speziell auf wechselnde Eingriffsbedingungen ausgelegt ist. Dadurch entsteht eine robuste Schneidkante mit guter Standzeit, die bei leicht unterbrochenem Schnitt Zähigkeit statt Sprödigkeit liefert. Für Anwender führt das zu höheren Ausbringungsraten und weniger Werkzeugwechseln, was die Produktivität im Betrieb direkt erhöht. Material- und Geometrie-Design für stabile Spanbildung Die Trigon-Plattenform mit Eckenradius 0,8 mm und Plattendicke 4,76 mm sorgt für eine gleichmäßige Kraftverteilung und stabile Spanabfuhr. Der doppelseitige Spanbrecher erleichtert unterschiedliche Schnittbedingungen, während das zylindrische Loch eine sichere Positionierung auf dem Halter gewährleistet. Kunden profitieren von reproduzierbarer Bearbeitungsqualität und konsistenter Oberflächengüte bei Stahlkomponenten. Kompatibilität, Einsatzbereiche und Anwendernutzen Als ISO-Drehwendeschneidplatte ist die Platte kompatibel zu standardisierten Haltern; Form, Freiwinkel 0°, Toleranzklasse und Befestigung müssen bei der Halterauswahl berücksichtigt werden. Typische Anwendungen sind Außen- und Innendrehen schwerer Stahlwerkstücke, wenn Zähigkeit und Belastbarkeit gefragt sind. Die Sorte T9225 ist eine robuste Universalsorte, die breite Werkstoffabdeckung ermöglicht und besonders bei wechselnden Bedingungen wirtschaftlich arbeitet. Praxistipps zur Anwendung und Prozesssicherheit Für konstante Prozesse empfiehlt sich die Abstimmung von Schnittdaten auf die Sorte T9225, um Standzeit und Oberflächengüte zu optimieren. Ein stabiler Maschinenaufbau und passende Halter reduzieren Vibrationen und ermöglichen das volle Potential der Wendeplatte. Weniger Werkzeugwechsel bedeutet geringere Nebenzeiten und messbar bessere Bearbeitungskosten über die Lebensdauer der Platte. Empfehlung: Die Kombination aus CVD-beschichtetem Hartmetall und robuster Plattengeometrie macht die WNMG 060408 T9225 von Tungaloy zur wirtschaftlichen Wahl für anspruchsvolles Drehen; bei Fragen stehen Metav Werkzeuge und die Technische Beratung gerne zur Verfügung – 📧 info@metav-werkzeuge.com / ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6787113 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408 T9225 Hersteller SKU: TUN6787113 Fakten Plattendicke: 4,76 mm Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattengröße: 06 ISO-Bezeichnung: 060408 Besonderheiten Material: Hartmetall Sorte: T9225 Beschichtung: CVD (chemische Gasphasenabscheidung) Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen FAQ Welche Werkstoffe kann die WNMG 060408 T9225 bearbeiten? Die WNMG 060408 T9225 von Tungaloy ist primär für Stahl ausgelegt und eignet sich für mittlere bis schwere Stahlbearbeitung; die robuste Sorte T9225 deckt wechselnde Schnittbedingungen ab. Wie wird die Platte am Halter befestigt? Die Platte verfügt über ein zylindrisches Loch und ist für ISO-kompatible Halter mit passender Form, Freiwinkel und Toleranzklasse vorgesehen; die sichere Befestigung reduziert Vibrationen und verbessert die Standzeit. Wann ist die Sorte T9225 die richtige Wahl? Wenn Zähigkeit bei leicht unterbrochenem Schnitt gefragt ist und eine breite Werkstoffabdeckung benötigt wird, bietet die Sorte T9225 eine wirtschaftliche Balance aus Standzeit und Zuverlässigkeit. Welche Geometrie beeinflusst die Oberflächengüte? Eckenradius 0,8 mm und die Trigon-Form unterstützen stabile Spanbildung und gleichmäßige Schneidbedingungen, was sich positiv auf die resultierende Oberflächengüte auswirkt. Lässt sich die Wendeplatte für Innen- und Außendrehen einsetzen? Ja, die ISO-geformte WNMG060408 ist für Außen- und Innendrehen geeignet; die Auswahl des passenden Halters und der Schnittdaten entscheidet über optimale Ergebnisse. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
WNMG060408 T9225 Tungaloy-Wendeplatte — ISO-Drehwendeschneidplatte zum Drehen Die WNMG060408 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für mittlere bis schwere Stahlbearbeitung bei wechselnden Schnittbedingungen ISO-Format WNMG060408 für standardisierte Halter CVD-beschichtetes Hartmetall für hohe Standzeit Universalsorte T9225 für mittlere bis schwere Stähle Trigon-Form mit 0° Freiwinkel, mit zylindrischem Loch Doppelseitig nutzbar, Eckenradius 0,8 Produktives Drehen bei wechselnden Schnittbedingungen Die WNMG060408 T9225 Tungaloy-Wendeplatte bietet durch die Kombination aus robuster Schneidstoffsorte und standardisierter ISO-Auslegung einen klaren Produktivitätsvorteil. Die Sorte T9225 wurde speziell für mittlere bis schwere Stahlbearbeitung entwickelt und sorgt für stabile Spanbildung selbst bei leicht unterbrochenem Schnitt. Anwender profitieren von längeren Standzeiten und weniger Maschinenstillstand, weil die Platte Zähigkeit und Verschleißfestigkeit ausbalanciert. Die klar definierte Schnittgeometrie reduziert Rüstzeiten durch einfache Austauschbarkeit zwischen Haltern. Hartmetall und Beschichtung für konstante Werkzeugleistung Das verwendete Hartmetall mit CVD-Beschichtung (chemische Gasphasenabscheidung) verbessert die Verschleißfestigkeit und schützt die Schneidkante gegen Kantenaufbau. Für Fertigungsleiter bedeutet das planbare Standzeiten und reproduzierbare Ergebnisse bei Serienläufen. Die Beschichtung sorgt zudem für bessere Wärmebeständigkeit, was bei höheren Schnittgeschwindigkeiten die Prozesssicherheit erhöht. Kurz erklärt: CVD ist ein Schichtaufbauverfahren, das eine harte, haftfähige Beschichtung erzeugt und so die Lebensdauer der Wendeschneidplatte verlängert. Passgenauigkeit und Einbaumerkmale für sichere Wiederholbarkeit Die Trigon-Form, die Plattengröße 06 und die Plattendicke 4,76 mm sowie das zylindrische Loch gewährleisten eine präzise Positionierung im Halter. Der Freiwinkel von 0° und der Eckenradius 0,8 sind technische Vorgaben, die eine stabile Spanabfuhr und gleichmäßige Lastverteilung ermöglichen. Durch die ISO-Normierung ist die Kompatibilität zu passenden Außenhaltern oder Bohrstangen gegeben; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung. Das führt zu geringeren Einrichtzeiten und reproduzierbaren Bauteilmaßen. Zielgruppe und typische Einsatzfelder in der Fertigung Diese Wendeschneidplatte richtet sich an Zerspanungsbetriebe, Werkzeugmechaniker und Serienfertiger, die Stahlbauteile mit mittlerer bis hoher Anspruchsstellung fertigen. Typische Einsatzfelder sind Maschinenbau, Automobilzulieferer und allgemeiner Maschinenteilebau, wo wechselnde Eingriffsbedingungen und unterbrochene Schnitte zu erwarten sind. Die doppelseitige Nutzbarkeit und die universelle Spanbrecherauslegung machen die Platte zu einer wirtschaftlichen Wahl für Fertigungen, die Prozesssicherheit und konstante Oberflächengüten fordern. Für maximale Prozesssicherheit empfehlen wir die WNMG060408 T9225 von Tungaloy — Anfrage und individuelle Beratung über Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 Produktmerkmale Artikelnummer: 6780714 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408 T9225 Tungaloy-Wendeplatte Hersteller SKU: TUN6780714 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 06 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: T9225 (CVD, chemische Gasphasenabscheidung) Plattenform: Trigon Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Nutzbar: doppelseitig ISO-Bezeichnung: WNMG060408 FAQ Welche Werkstoffe werden mit dieser Wendeplatte bearbeitet? Die WNMG060408 T9225 Tungaloy-Wendeplatte ist für mittlere bis schwere Stahlbearbeitung optimiert; die Sorte T9225 bietet Zähigkeit für wechselnde Eingriffsbedingungen und eignet sich daher besonders für Baustahl und legierten Stahl. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung der Tungaloy-Wendeplatte reduziert den Verschleiß an der Schneidkante und verbessert die Wärmebeständigkeit, wodurch sich planbare und längere Standzeiten in der Serienfertigung ergeben. Welche Einbaumerkmale sind für die Halterkompatibilität wichtig? Bei der Auswahl des passenden Halters sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke entscheidend; die ISO-Genormtheit der WNMG060408 erleichtert die Auswahl kompatibler Außenhalter und Bohrstangen. Ist die Platte mehrfach verwendbar und wie hoch ist der Eckenradius? Die Platte ist doppelseitig nutzbar und besitzt einen Eckenradius von 0,8 mm, was eine gute Balance zwischen Kantentragfähigkeit und Oberflächengüte bietet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Benefit from a CVD-coated carbide grade T9225, precise trigon geometry and a 0.8 mm corner radius that deliver stable performance in medium‑to‑heavy Stahl turning; order directly via Metav Werkzeuge or consult our specialists for application support. WNMG 060408 T9225 — trigon turning insert for Stahl by Tungaloy The WNMG060408 T9225 is a CVD‑coated carbide trigon insert designed for external and internal turning operations in Stahl, offering robustness for interrupted cuts and varying engagement conditions. CVD-coated carbide grade T9225 Trigon insert with 0° clearance Double-sided chipbreaker for stability Cylindrical hole and 4.76 mm plate thickness Durable grade for variable turning conditions The T9225 designation identifies a CVD-coated carbide grade optimised for medium-to-heavy Stahl machining where alternating engagement or light interruptions demand increased toughness. The chemical vapour deposition (CVD) coating forms a wear‑resistant surface layer that reduces flank wear and maintains edge integrity under fluctuating cut loads. In practice, this means fewer unexpected tool changes and a more predictable process window, supporting higher productivity and consistent part quality in batch and single‑piece production environments. Geometry engineered for stable chip control and repeatability The trigon plate shape with an included 0° clearance and a 0.8 mm corner radius combines rigidity with repeatable edge position. The double-sided chipbreaker profile promotes controlled chip formation across a range of cut depths, reducing the risk of chip entanglement and improving surface finish even when turning less stable setups. Specified plate thickness (4.76 mm) and the cylindrical locating hole ensure secure clamping and positional accuracy in compatible holders, which helps to maintain repeatable results shift after shift. ISO compatibility and system integration for easy selection As an ISO‑standard turning plate, compatibility with a holder is determined by form, free angle, tolerance class, attachment method, size and thickness. The ISO designation and the WNMG geometry make this insert compatible with many standard external holders and boring bars; a complete system typically comprises the insert, a suitable outer holder or bar, a shim or clamp set and replacement screws. This modular approach permits straightforward inventory management and fast changeovers on the shop floor while preserving the mechanical stability required for more demanding Stahl operations. Operational benefits and application recommendations Selecting a robust universal grade and the correct chipbreaker for the material and stability of the setup reduces cycle time and extends tool life, offering a favourable cost‑to‑performance ratio in production. The insert performs well for both external and internal turning when combined with a stable holding solution and appropriate cutting data. For marginal setups, choose conservative depths of cut and feed rates and inspect the clamping torque; with a properly set system the result is stable cutting, improved surface quality and predictable tool life. For personalised advice on applying this Tungaloy insert in Stahl turning and for ordering via Metav Werkzeuge, contact info@metav-werkzeuge.com or telephone +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6780649 Manufacturer SKU: TUN6780649 SKU: 6780649-Tungaloy Label: WNMG060408 T9225 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / Core technical data ISO designation: 060408 Size: 06 Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Designs / Special features Material: carbide Coating: CVD Plate form: trigon Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) FAQ What materials is this insert suitable for? The WNMG060408 T9225 insert from Tungaloy is intended primarily for Stahl machining and performs strongly in medium‑to‑heavy turning applications. How does the T9225 grade affect tool life? The T9225 CVD coating enhances wear resistance and edge stability, which leads to more predictable tool life under varying engagement and interrupted‑cut conditions. Which holders are compatible with this ISO insert? Compatibility depends on insert form, free angle, tolerance class, attachment method, size and thickness; use holders designed for WNMG plates and ensure correct clamping components are fitted. Is this insert suitable for internal turning? Yes—the trigon geometry and double‑sided chipbreaker make the plate suitable for both external and internal turning when used with the appropriate boring bar and stable setup. What edge radius is recommended for finishing operations? The insert provides a 0.8 mm corner radius; for finer finishes, consider a smaller radius if available, or adjust feed and depth of cut for the desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated cemented carbide and the robust universal grade T9225 for consistent performance in medium to heavy steel turning; the ISO geometry and cylindrical hole ensure reliable seating in standard holders. Order the insert directly via Metav Werkzeuge or request advice from their consultants to confirm holder compatibility. WNMG 060408 T9225 WNMG060408 – ISO turning insert, CVD‑coated cemented carbide, for Turning, Tungaloy A versatile ISO‑standard turning insert, WNMG060408 T9225, designed for external and internal turning of steel with a double‑sided chipbreaker and trigon geometry CVD-coated cemented carbide grade T9225 Universal for medium to heavy steel turning Triangular ISO WNMG 06, 0.8 mm corner radius Double-sided chipbreaker, with cylindrical hole Consistent cutting performance for demanding steel work The CVD‑coated surface on this cemented carbide grade prioritises wear resistance and edge stability, so the insert sustains cutting performance under changing engagement conditions. The T9225 grade is formulated as a robust universal grade, balancing toughness and hardness to handle medium to heavy machining of steel where slight interruptions or variable cuts occur. This combination reduces edge chipping and supports longer tool life while maintaining acceptable surface finish levels. Clear compatibility with ISO holders and secure seating Designed to the ISO geometry for trigon inserts, the plate’s form, relief angles and tolerance class determine holder compatibility. The trigon shape and the cylindrical hole provide positive location and clamping in many standard external holders and boring bars; the plate thickness of 4.76 mm and the lead angle of 80° must be matched to the intended toolholder. The nominal corner radius of 0.8 mm influences feed and surface finish, so the chosen holder must accept the WNMG 06 size and the 0° relief to ensure correct cutting geometry and repeatable positioning. Practical handling to extend service life and maintain productivity The double-sided chipbreaker design offers reversible use of cutting edges and a compact spare‑edge strategy, which contributes to lower running costs in production environments. For best results, combine the insert with a holder suited to interrupted cuts and select cutting parameters aligned with the radius and grade—slightly higher feeds for the 0.8 mm radius can improve chip control without sacrificing surface quality. Controlled coolant application and stable clamping further reduce vibration and support predictable wear progression. When to specify this insert and straightforward maintenance tips This clamped, indexable insert is suited to job shops and production lines that machine a range of steel components and need a resilient, all‑round solution. Specify this grade when material variability, interrupted cuts or heavier feed rates are expected; choose a matching chipbreaker and holder geometry for optimal swarf evacuation. Replace the insert as soon as wear affects dimensional tolerance or finish; rotating the double‑sided plate can recover cutting edges and limit downtime between tool changes. Contact Metav Werkzeuge today for tailored advice on Tungaloy WNMG060408 T9225 inserts, including holder compatibility checks and application recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6780970 Manufacturer SKU: TUN6780970 SKU: 6780970-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade: T9225 Designation: WNMG060408 Label: WNMG060408 T9225 Core data ISO code: 060408 Size: 06 Thickness: 4.76 mm Corner radius: 0.8 mm Relief (rake) angle: 0° Lead/approach angle: 80° Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Special features CVD-coated surface Robust universal grade for steel turning Trigon (triangular) plate form Double-sided, indexable design Compatible with ISO-standard external holders Suitable for slightly interrupted cuts FAQ Which materials is this insert primarily intended for? The WNMG060408 T9225 insert is primarily intended for machining steel, offering a robust universal solution for medium to heavy turning operations. How does the T9225 grade influence cutting performance? T9225 is a CVD‑coated cemented carbide grade that balances toughness and wear resistance, making the insert favourable for changing engagement conditions and slightly interrupted cuts in steel. Is the insert reversible or indexable? Yes, the double‑sided design allows the plate to be indexed, extending usable life by providing multiple cutting edges before replacement is necessary. What holder features must be checked before fitting the plate? Ensure the holder matches the trigon geometry, 06 size, 4.76 mm thickness, the 0° relief, and accepts the cylindrical hole for correct clamping and repeatable positioning of the plate. Can the insert be used for internal as well as external turning? The insert is suitable for both external and internal turning when paired with the correct external holder or boring bar that supports ISO WNMG plate geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
WNMG060408 T9225 Wendeplatte zum Drehen von Tungaloy Die WNMG060408 T9225 ist eine ISO-genormte Trigon-Wendeplatte für Außen- und Innendrehen, konzipiert für mittlere bis schwere Stahlbearbeitung mit robuster CVD-beschichtung. Wendeplatte »WNMG060408« von Tungaloy CVD-beschichtetes Hartmetall für hohe Standzeit Doppelseitiger Spanbrecher für stabile Spanbildung Trigonform mit zylindrischem Loch, 0° Freiwinkel Plattendicke 4,76 mm, Eckenradius 0,8 mm Robuste Hartmetalltechnik für zuverlässige Zerspanung Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9225 sorgt für erhöhte Zähigkeit bei wechselnden Eingriffsbedingungen. Das Ergebnis ist eine stabile Spanbildung und eine verlängerte Standzeit, besonders bei unterbrochenem Schnitt oder variierenden Schnitttiefen. Anwender profitieren von gleichbleibender Performance über mehrere Umsetzungen hinweg, wodurch Rüstzeiten und Werkzeugkosten reduziert werden. Präzise Systemkompatibilität für sichere Halteraufnahme Als ISO-genormte Drehwendeschneidplatte ist die Passform entscheidend: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität zum Halter. Die Trigonform mit zylindrischem Loch und 0° Freiwinkel gewährleistet eine sichere Klemmsitz und reproduzierbare Lage am Außenhalter. Dadurch lassen sich Wiederholgenauigkeit und Oberflächengüte zuverlässig realisieren. Vielseitiger Einsatzbereich und Materialabdeckung Die Sorte T9225 ist ausgelegt für die Bearbeitung von Stahl unter mittleren bis schweren Bedingungen. Durch den doppelseitigen Spanbrecher lässt sich die Spanform an Bearbeitungsart und Werkstückstabilität anpassen, was die Prozesssicherheit verbessert. Für Anwender bedeutet das: weniger Ausschuss, konstantere Schnittbedingungen und vereinfachte Werkzeugverwaltung im Betrieb. Wirtschaftlichkeit durch effiziente Werkzeugnutzung Die doppelseitige Nutzbarkeit der Platte und die robuste Beschichtung reduzieren den Verbrauch pro Bauteil und senken die Gesamtbetriebskosten. In Kombination mit ISO-konformen Haltersystemen trägt die Wendeplatte zur Produktivitätssteigerung bei, indem Stillstandzeiten für Werkzeugwechsel minimiert werden. Das führt zu planbaren Durchläufen und besserer Auslastung der Maschine. Für optimale Prozesse empfiehlt Metav Werkzeuge die Tungaloy WNMG060408 T9225; Verfügbarkeit und technische Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6945089 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408 Hersteller SKU: TUN6945089 Händler SKU: 6945089-Tungaloy Fakten Plattendicke: 4,76 mm Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattengröße: 06 Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Dampfabscheidung) Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) Plattenform: trigon Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Einsatz: Drehen ISO-genormt FAQ Welche Werkstoffe lassen sich mit der WNMG060408 T9225 bearbeiten? Die WNMG060408 T9225 von Tungaloy ist vor allem für die Bearbeitung von Stahl unter mittleren bis schweren Bedingungen ausgelegt; bei wechselnden Schnittbedingungen bietet die Sorte erhöhte Zähigkeit und stabile Spanbildung. Ist die Platte mit gängigen ISO-Außenhaltern kompatibel? Ja, die WNMG060408 T9225 ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse und Befestigungsart des Halters ab. Die Trigonform und das zylindrische Loch ermöglichen in vielen Systemen sicheren Sitz. Welche Vorteile bringt die CVD-Beschichtung? Die CVD-Beschichtung verbessert die Verschleißfestigkeit und thermische Beständigkeit der Platte, was die Standzeit erhöht und konstante Schneidkanten über mehrere Umsetzungen ermöglicht. Wie wirkt sich der doppelseitige Spanbrecher aus? Ein doppelseitiger Spanbrecher erlaubt die Nutzung beider Schneidkanten und unterstützt eine kontrollierte Spanbildung; das reduziert Rüstintervalle und senkt die Stückkosten. Welche Maße sind für die Auswahl des Halters entscheidend? Wichtige Maße sind Plattendicke 4,76 mm, Plattengröße 06, Eckenradius 0,8 mm sowie Winkel 80° und Freiwinkel 0°; diese Angaben helfen bei der Wahl des passenden ISO-Außenhalters. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Benefit from a CVD‑coated carbide T9225 grade and a trigon ISO form that deliver stable performance in medium to heavy turning; compatibility with ISO holders reduces changeover time. Order the WNMG060408E-PS T9225 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 060408 T9225 ISO trigon turning insert, CVD‑coated carbide — Tungaloy The WNMG 060408 T9225 is an ISO trigon insert engineered for external and internal turning, offering robust cutting performance for steel machining. CVD-coated carbide grade T9225 for steel machining ISO-standard WNMG trigon shape for easy replacement Suitable for medium to heavy turning operations 0° clearance and cylindrical centre hole for secure clamping Consistent cutting performance for medium to heavy turning The combination of CVD‑coated surface and carbide substrate in grade T9225 provides a balance of wear resistance and toughness that favours stable cutting in varying conditions. The chipbreaker PS is optimised for interrupted cuts and fluctuating engagement, helping to control chip formation and reduce the risk of edge chipping. This results in more predictable tool behaviour and contributes to longer tool life and fewer unscheduled tool changes on the shop floor. ISO compatibility and secure clamping to reduce downtime Built to ISO dimensions in a trigon form with an 80° insert angle and a cylindrical centre hole, the insert ensures compatibility with a wide range of established turning holders. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the system comprises an ISO insert, a matching external holder or boring bar, a shim/seat and fastening screws. The 0° clearance and central hole support secure clamping, which improves repeatability and reduces the need for rework after insert changes. Lower unit costs through process stability and predictable wear Reliable edge life and stable chip control translate into measurable savings: fewer tool changes, less scrap and more consistent surface finishes in serial production. The robust universal nature of T9225 means it handles a broad range of steel grades under medium to heavy cutting conditions, reducing the need for multiple grades in inventory. As an ISO indexable solution from a recognised manufacturer, this insert supports reproducible setup and predictable cycle times for turning operations. Contact Metav Werkzeuge for tailored application advice and to order original Tungaloy WNMG060408E-PS T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: 6966363 Manufacturer SKU: TUN6966363 Stock SKU: 6966363-Tungaloy Designation: WNMG060408E-PS Grade: T9225 Material: carbide Facts Insert size: 06 ISO code: 060408 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 80° Special features Trigon insert form Cylindrical centre hole Chipbreaker: PS CVD coating Designed for turning (external and internal) Suitable for medium to heavy steel machining FAQ What materials is this insert best suited for? The WNMG060408E-PS T9225 is designed primarily for steel machining, handling medium to heavy cuts where toughness and wear resistance are required. How is compatibility with holders ensured? Compatibility is achieved by matching the ISO WNMG form, clearance angle, tolerance class, fastening method, size (06) and thickness (4.76 mm); the cylindrical hole supports standard clamping arrangements. What benefits does the PS chipbreaker provide? The PS chipbreaker promotes controlled chip formation under variable engagement and interrupted cuts, improving surface finish and reducing the risk of edge damage for the WNMG060408E-PS insert. Why choose a CVD‑coated carbide grade like T9225? A CVD‑coated carbide such as T9225 combines surface hardness with core toughness, increasing wear resistance and delivering a predictable tool life in demanding turning operations. Is this insert suitable for internal turning as well as external turning? Yes, the ISO trigon geometry and central hole allow the insert to be used in both external and internal turning applications when installed in an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
WNMG 060408 T9225 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 060408 T9225 ist eine ISO-genormte Trigon-Wendeschneidplatte für Außen- und Innendrehen, ausgelegt für mittlere bis schwere Stahlbearbeitung mit robustem CVD-beschichtetem Hartmetall. WNMG 060408 T9225 für ISO-genormtes Drehen CVD-beschichtetes Hartmetall für robuste Zerspanung Universalsorte T9225 für mittlere bis schwere Bearbeitung Trigonform mit 0,8 mm Eckenradius, mit zylindrischem Loch Kompatibel mit ISO-Haltern dank genormter Maße Mehr Produktivität durch standfeste Schneide Die Kombination aus CVD-Beschichtung und Hartmetall-Substrat sorgt für längere Standzeit und stabile Spanbildung bei wechselnden Eingriffsbedingungen. Anwender profitieren von konstanter Leistung auch bei leicht unterbrochenem Schnitt, was Stillstandszeiten reduziert und die Produktivität in der Fertigung erhöht. Ein klarer Vorteil für Betriebe, die wiederholgenaue Ergebnisse und hohe Ausbringung benötigen. Beschichtung und Material verständlich erklärt Die CVD-beschichtung (Chemische Gasphasenabscheidung) bildet eine harte, temperaturbeständige Schicht auf dem Hartmetall, die Wärmeableitung und Verschleißverhalten verbessert. Für Anwender heißt das: weniger Nachschleifen, bessere Kantengüte und zuverlässigere Wechselintervalle. Die Sorte T9225 ist als Universalsorte konzipiert und bietet ein gutes Verhältnis aus Zähigkeit und Verschleißfestigkeit für Stahlwerkstoffe. Passgenauigkeit, Geometrie und Einsatzbereiche Dank ISO-Genormung und Trigonform fügt sich die Platte in gängige Außenhalter und Bohrstangen ein; die Plattendicke von 4,76 mm und das zylindrische Loch gewährleisten sichere Befestigung. Der Freiwinkel 0° und der Eckenradius 0,8 mm unterstützen stabile Spanformer und ermöglichen saubere Schnittkanten beim Drehen von Stahl. Besonders geeignet ist die Platte für Werkstücke mit wechselnder Schnittstabilität. Für wen sich die Platte eignet und Auswahlhinweise Werkstätten, Lohnfertiger und Serienproduzenten, die robuste, vielseitige Wendeschneidplatten suchen, finden mit dieser Ausführung eine wirtschaftliche Lösung. Der Spanbrecher PM ist sinnvoll bei gemischten Schnitten und leicht unterbrochenen Schnitten; für sehr feine Oberflächen kann ein kleinerer Eckenradius oder ein anderer Spanbrecher in Betracht gezogen werden. Bei Unsicherheit empfiehlt sich die Abstimmung mit der Anwendungstechnik. Empfehlung: Für produktive Stahlzerspanung die WNMG 060408 T9225 von Tungaloy wählen; bei Detailfragen oder Einsatzberatung gern Kontakt aufnehmen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6966391 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG060408E-PM Daten Eckenradius: 0,8 mm Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 06 Winkel: 80° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (Chemische Gasphasenabscheidung) Sorte: T9225 Spanbrecher: PM (für gemischte und leicht unterbrochene Schnitte) Plattenform: Trigon Loch: Zylindrisches Loch Einsatz: Drehen System: ISO-genormt Wendeplattenbezeichnung: WNMG060408E-PM FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die Platte WNMG060408E-PM T9225 von Tungaloy ist speziell für die Bearbeitung von Stahl konzipiert und eignet sich besonders für mittlere bis schwere Stahlbearbeitung; die Universalsorte T9225 bietet gute Zähigkeit bei wechselnden Schnittbedingungen. Wie beeinflusst der Eckenradius die Zerspanung? Ein Eckenradius von 0,8 mm sorgt für robuste Schneidkanten und höhere Kantenschlagfestigkeit; bei der WNMG060408E-PM T9225 führt das zu stabiler Spanbildung und reduziertem Verschleiß, während sehr feine Oberflächen ggf. kleinere Radien erfordern. Was bedeutet PM als Spanbrecher? PM beschreibt den Spanbrecher der Wendeplatte WNMG060408E-PM T9225 und steht für eine universelle Geometrie, die bei gemischten Schnitten und leicht unterbrochenen Schnitten stabile Späne erzeugt. Ist die Platte mit Standardhaltern kompatibel? Ja, die ISO-genormte Geometrie der WNMG060408E-PM T9225 erlaubt die Nutzung in gängigen ISO-Außenhaltern und Bohrstangen; Abstützmaß und Befestigung müssen passend zur Halterausführung gewählt werden. Welche Vorteile bietet die CVD-Beschichtung konkret? Die CVD-Beschichtung der WNMG060408E-PM T9225 verbessert Verschleißfestigkeit und Hitzeresistenz, was zu längeren Standzeiten und zuverlässigeren Bearbeitungsergebnissen bei Stahl führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide performance combined with precise ISO geometry and reliable chip control ensures consistent productivity in turning operations; select compatible holders by form, clearance and size for optimal results. Order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility and application support. WNMG 060408 T9225 — Turning insert (CVD-coated carbide) by Tungaloy A WNMG 060408 T9225 indexable turning insert designed for medium to heavy steel machining, offering robust chip control and high toughness for interrupted cuts. WNMG 060408 geometry for versatile turning CVD-coated carbide grade T9225 for durability Double-sided chipbreaker for stable chips 0° relief angle with cylindrical hole for secure clamping Consistent cutting performance for medium to heavy steel The grade supplied, T9225, is a CVD-coated carbide developed for reliable performance in medium to heavy steel machining where variable engagement or light interruptions require enhanced toughness. Thanks to the coating and substrate combination, wear resistance is improved while maintaining the fracture toughness needed for demanding turning tasks. This results in extended tool life and fewer insert changes, supporting higher uptime and predictable cycle times on production lathes and CNC turning centres. Secure mounting and ISO compatibility to reduce setup time Designed as an ISO-standard indexable insert, compatibility with a suitable holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The trigon geometry and the cylindrical hole provide reliable location and clamping repeatability; the 0° relief angle offers a neutral cutting orientation that suits a range of holder designs. Using the correct clamping hardware and a matched seat minimises vibration and improves surface finish, so set-up is faster and process stability is increased. Chip control and dimensional stability for efficient production The insert’s double-sided chipbreaker and geometry deliver controlled chip formation under varied cut depths, while the corner radius 0.8 mm, 4.76 mm thickness and 80° included angle contribute to robust edge support and deflection resistance. These attributes reduce the risk of edge chipping in interrupted cuts and maintain repeatable part tolerances. As an indexable insert, it permits economical re-indexing and predictable performance across multiple edges, lowering tooling costs per component and simplifying inventory management. For productive, reliable turning with authentic Tungaloy quality, order WNMG 060408 T9225 inserts through Metav Werkzeuge and contact our advisers for assistance with holder selection and application parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781297 Manufacturer SKU: TUN6781297 SKU: 6781297-Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Size: 06 Special features Shape: trigon Hole: with cylindrical hole Chipbreaker: double-sided Grade/coating: T9225 (CVD-coated carbide) Material: carbide System: ISO-standard indexable insert, compatible with ISO holders and clamping sets FAQ What materials is this insert suitable for? The WNMG 060408 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 CVD-coated carbide grade provides a balance of wear resistance and toughness for such applications. Can this insert be used for interrupted cuts? Yes, the T9225 grade and the insert’s geometry are selected to cope with light interruptions and variable engagement, offering improved resistance to chipping during interrupted turning. How is the insert secured in the holder? The insert features a cylindrical hole and ISO geometry; secure clamping depends on matching the holder by form, relief angle and tolerance class to ensure repeatable location and clamping stability. How many usable cutting edges are available? As a double-sided, trigon indexable insert, multiple edges can be indexed; the exact number of usable edges depends on the holder arrangement and the specific insert orientation used. What does the code T9225 indicate? T9225 denotes the manufacturer’s carbide grade and CVD coating specification: a robust universal grade tailored for a broad range of steel machining tasks where toughness and wear resistance are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9225 Wendeplatten - Tungaloy
Robust, CVD-coated carbide in grade T9225 delivers dependable performance for medium-to-heavy steel turning; the ISO WNMG060408 geometry with an 80° lead and 0.8 mm corner radius ensures stable cutting and long wear life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. WNMG 060408 T9225 turning insert by Tungaloy — CVD-coated carbide The WNMG060408 T9225 is an ISO-standard turning insert engineered for medium-to-heavy steel turning, offering a balance of toughness and wear resistance for interrupted or varying cuts. CVD-coated carbide grade T9225 Trigon shape for secure clamping 0.8 mm corner radius for versatility Double-sided chipbreaker for repeatability Cylindrical hole, 80° geometry for stability Reliable edge life for demanding steel turning The combination of CVD-coated carbide and the T9225 formulation provides a compromise between hardness and toughness that is particularly suited to medium-to-heavy steel machining. The CVD (chemical vapour deposition) layer enhances wear resistance on the rake face while preserving a tough substrate, which reduces flank wear under variable cutting conditions. This results in less frequent insert changes and more predictable tool life, supporting continuous production where stability matters. Geometry and clamping designed to reduce setup risk The WNMG trigon form with a cylindrical centre hole and an 80° lead gives secure seating in ISO-compatible holders and promotes repeatable positioning. The 0.8 mm corner radius is a versatile choice for general finishing and light roughing, balancing edge strength with surface finish capability. Compatibility is determined by insert shape, clearance angle, tolerance class, fixing method, size and thickness; matching the insert to the appropriate holder ensures concentric clamping and consistent performance. Chip control and process security for repeatable results The double-sided chipbreaker fitted on this insert is tailored to provide controlled chip formation across a range of feeds and depths, improving swarf evacuation and reducing the risk of workpiece damage. For operators less familiar with chipbreaker types: a double-sided design offers two usable cutting edges per face, doubling edge count compared with single-sided alternatives and increasing cost-efficiency. When combined with the T9225 grade, the result is stable cutting with good surface integrity under changing engagement conditions. Practical selection and in-process guidance Select this insert where interrupted cuts or fluctuating depths demand additional toughness from the cutting edge. The CVD-coated carbide resists adhesive wear and thermal load, while the trigon platform supports secure clamping. For best results, pair the insert with a holder that matches the ISO WNMG060408 geometry and verify the recommended feeds and speeds for the chosen steel grade. Regular visual checks of the cutting edge and adherence to coolant or dry-cutting guidelines will extend useful life and maintain component quality. For robust, consistent medium-to-heavy steel turning with Tungaloy's T9225 grade, contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6780707-Tungaloy Manufacturer article number: 6780707 Manufacturer SKU: TUN6780707 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: WNMG060408 Size: 06 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Lead angle: 80° Special features Grade: T9225 (CVD-coated carbide) Shape: trigon Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning Suitable for medium-to-heavy steel machining FAQ Which holders are compatible with this insert? Compatibility is defined by ISO geometry, clearance angle, thickness and fixing method; the WNMG060408 form requires an ISO-compatible WNMG holder matched to its 4.76 mm thickness and trigon seat. What materials is the T9225 grade designed for? The T9225 grade is a robust universal CVD-coated carbide developed for medium-to-heavy steel machining, particularly where interrupted cuts or variable engagement require increased toughness. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving repeatability and surface quality across a range of feeds and depths. How many usable edges are available per insert? As a double-sided trigon insert, the item provides multiple indexed cutting edges; rotating and indexing the insert extends usable life before replacement is required. Is this insert suitable for finishing passes? Yes—the 0.8 mm corner radius and the CVD-coated edge provide a good combination of finish capability and edge strength for many finishing and light roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060408 T9235 Wendeplatten - Tungaloy
WNMG 060408 T9235 Wendeplatte für Drehen – Tungaloy WNMG 060408 T9235 ist eine ISO-genormte Trigon-Wendeplatte für das Außen- und Innendrehen und wurde für zähe Stahlbearbeitung bei instabilen Schnittbedingungen entwickelt ISO-genormte Trigonplatte, Größe 06 CVD-beschichtetes Hartmetall für zähe Einsätze Doppelseitiger Spanbrecher für unterbrochene Schnitte Zylindrisches Loch, kompatibel mit Standardhaltern Eckenradius 0,8 mm für feine Übergänge Höhere Prozesssicherheit bei instabilen Bedingungen Die WNMG060408 Wendeplatte kombiniert ein CVD-beschichtetes Hartmetall mit einer zähen Sorte, die speziell für Stahl ausgelegt ist. Durch die Beschichtung (CVD = chemische Dampfabscheidung) erhöht sich die Verschleißfestigkeit, was längere Standzeiten und konstante Oberflächenqualitäten ermöglicht. Anwender profitieren von stabiler Spanbildung und geringerer Ausschussrate, wenn Schnitte unterbrochen oder die Maschinensteifigkeit limitiert ist. Einfache Integration in vorhandene Haltersysteme Für die Integration zählen Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die Trigon-Plattenform und das zylindrische Loch sichern die Wiederholgenauigkeit bei Befestigung auf verbreiteten Außenhaltern und Bohrstangen. Praktisch ist zudem der doppelseitige Spanbrecher, der bei wechselnden Schnittbedingungen flexiblere Einsatzmöglichkeiten bietet und Rüstzeiten reduziert. Wirtschaftlichkeit durch gezielte Werkstoffwahl Die Kombination aus Hartmetall und der Sorte T9235 ist auf niedrigere Schnittgeschwindigkeiten und instabile Bedingungen ausgelegt, wodurch sich Werkzeugkosten und Stillstandzeiten im Fertigungsprozess verringern. Von der Serienfertigung bis zur Einzelteilbearbeitung ermöglicht die Platte zuverlässige Ergebnisse bei Stahl, ohne die Maschine übermäßig zu belasten. Empfehlung: Für zähe Stahlbearbeitung unter instabilen Schnittbedingungen empfiehlt sich die Tungaloy Wendeplatte WNMG060408 T9235 – Bestell- und Beratungsanfragen über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6786008 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 06 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Dampfabscheidung) Sorte: T9235 Plattenform: Trigon Loch: mit Loch, zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Typische Anwendung: Außen- und Innendrehen Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke FAQ Welche Werkstoffe sind für diese Wendeplatte geeignet? Die Wendeplatte WNMG 060408 T9235 von Tungaloy ist speziell für Stahl ausgelegt; die zähe Sorte T9235 sorgt für stabile Spanbildung auch bei instabilen Schnitten. Ist die Platte für unterbrochene Schnitte geeignet? Ja, der doppelseitige Spanbrecher der Tungaloy Wendeplatte reduziert Bruchgefahr und verbessert die Spansteuerung bei unterbrochenen Schnitten. Welche Halter passen zur WNMG060408 T9235? Standard-Außenhalter und Bohrstangen, die ISO-genormte Trigonplatten der Größe 06 aufnehmen, sind kompatibel; Befestigung und Freiwinkel müssen zur Halterausführung passen. Wie wirkt sich die CVD-Beschichtung aus? Die CVD-Beschichtung erhöht die Oberflächenhärte und Verschleißfestigkeit, was zu längeren Standzeiten und konstanteren Oberflächenergebnissen führt Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 060412 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 for wear resistance, the trigon WNMG geometry for broad ISO compatibility, and the robust double-sided chipbreaker for stable chip control; order the WNMG060412 AH120 insert directly via Metav Werkzeuge or consult our advisors for application support. WNMG 060412 AH120 Turning Insert — Tungaloy, PVD-coated carbide, 1.2 mm radius WNMG060412 AH120 is an ISO-standard trigon insert for turning, designed for applications where a sharp cutting edge and reliable process security are required. *PVD-coated carbide AH120 for wear resistance *Trigon WNMG shape with 80° cutting angle *Double-sided chipbreaker for reliable chips *1.2 mm corner radius, central cylindrical hole Consistent cutting performance through PVD-coated AH120 The AH120 grade is a PVD-coated carbide substrate formulated for demanding turning work where edge stability and resistance to chipping are essential. The coating improves wear resistance and helps maintain a sharp cutting geometry over longer cycles, which reduces the frequency of tool changes and supports a steady production flow. This results in more consistent part quality and predictable tool life, which is particularly valuable for operations that prioritise uptime and repeatability. ISO geometry and simple holder compatibility to reduce set-up time The trigon WNMG form follows ISO-standard dimensions, so compatibility with external holders is determined by shape, relief angle, tolerance class, fastening and plate size and thickness. The 80° cutting angle combined with a 0° relief angle and a plate thickness of 4.76 mm ensures secure clamping and straightforward replacement. Clear ISO conformity simplifies tool planning and minimises setup errors, making integration into existing tool systems efficient and dependable. Reliable chip control for stable surface finish Equipped with a double-sided chipbreaker, this insert offers improved fragment control and smoother chip evacuation during turning. A well-designed chipbreaker reduces the risk of chip re-cutting and contributes to a more uniform surface finish. Where process stability is required, selecting the correct chipbreaker and grade for the workpiece and cutting conditions helps avoid downtime and supports higher effective productivity. Practical geometry and handling benefits for everyday turning The 1.2 mm corner radius delivers a balance between edge strength and dimensional capability, making the insert suitable for a range of turning passes where a compromise between roughing strength and finishing quality is needed. The central cylindrical hole and standardised pocket geometry enable secure fastening and economical indexing. As a double-sided, indexable solution the insert offers efficient use of cutting edges while maintaining grip and repeatability in serial production. For technical advice, availability or application recommendations for the WNMG060412 AH120 Tungaloy turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793711 SKU: 6793711-Tungaloy Manufacturer SKU: TUN6793711 Model series: ISO turning inserts Material: carbide Application: Turning Core specifications Designation: WNMG060412 Grade: AH120 Coating: PVD Corner radius: 1.2 mm Relief angle: 0° Cutting angle: 80° Plate size: 06 Plate thickness: 4.76 mm Design & features Plate form: trigon Hole: with hole (cylindrical) Chipbreaker: double-sided Typical system: ISO insert + appropriate holder, shim/clamp set, fixing screw FAQ What holders are compatible with this WNMG insert? Compatibility depends on the holder pocket matching the WNMG060412 geometry, relief angle, tolerance and plate thickness; the WNMG060412 AH120 Tungaloy insert is made to ISO dimensions for straightforward pairing with ISO WNMG holders. Which machining tasks suit this grade and chipbreaker? The AH120 PVD-coated carbide grade combined with a double-sided chipbreaker is intended for turning tasks where a sharp edge and process security are required; select the specific chipbreaker variant and cutting parameters to match the workpiece stability and material. How does the 1.2 mm corner radius affect machining results? A 1.2 mm corner radius increases edge strength compared with smaller radii, helping to resist chipping while still allowing acceptable dimensional control for many turning passes with the WNMG060412 insert. Is the insert indexable and economical for production runs? Yes, the WNMG060412 AH120 is a double-sided, indexable insert designed for economical edge utilisation and repeatable positioning, supporting efficient use in serial machining. What is the purpose of the central cylindrical hole? The central cylindrical hole secures the insert in the pocket with a fastening screw and ensures correct seating and repeatable clamping for consistent machining performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060412 AH120 Wendeplatten - Tungaloy
The combination of PVD-coated carbide AH120 for extended edge life and the TM chipbreaker for predictable chip control ensures efficient, process-secure turning. Choose this insert for stable performance in ISO-compliant turning setups and order the original article directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 060412 AH120 WNMG060412E-TM — ISO turning insert for external and internal turning by Tungaloy A WNMG060412E-TM AH120 insert designed for ISO-compliant external and internal turning, offering a sharp cutting edge and reliable chip control for stable metal removal PVD-coated carbide AH120 for wear resistance Trigon shape WNMG with 80° engagement 0° rake with cylindrical clamping hole 1.2 mm corner radius for strong cutting edge Prolonged edge life through advanced coating and substrate The combination of a PVD-coated surface and a carbide substrate delivers measurable benefits in everyday turning. The AH120 grade is engineered for wear and fracture resistance, which reduces the frequency of index changes and supports longer uninterrupted production runs. The thin PVD layer enhances thermal stability at the cutting edge while the carbide core maintains toughness; this balance is particularly valuable where a sharp edge and process security are required. As a result, cycle times can be more consistent and tool-change downtime is reduced. Predictable chip formation and improved surface quality A targeted chip control strategy is provided by the TM chipbreaker geometry in concert with the trigon plate form and 1.2 mm corner radius. This arrangement promotes short, controllable chips in many turning operations and helps to avoid tangling or tool damage. The 80° engagement angle and 0° rake contribute to a stable cutting action that favours consistent surface finish. For applications where repeatability and component quality matter, the engineered chipformer reduces rework and supports a more reliable machining process. ISO compatibility and secure clamping for versatile use The insert follows ISO plate conventions, so compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical clamping hole and a plate thickness of 4.76 mm enable secure fixation in matched external holders or boring bars, with an underlay/shim and replacement screws as required. This standardised approach simplifies tool inventory management and allows rapid exchange between machines while maintaining clamping integrity and concentricity. Practical advantages for production-focused turning Using this PVD-coated trigon insert leads to practical productivity gains: fewer interruptions for insert changes, consistent dimensional outcomes and reduced scrap rates. The robust edge, combined with the TM chipbreaker, supports demanding turning tasks where process security is a priority. Selecting the matching holder and the correct chipformer for the workpiece material will maximise the economic benefit and prolong overall toolset life. For process-critical turning tasks, contact Metav Werkzeuge for a tailored recommendation and secure the original Tungaloy WNMG060412E-TM AH120 insert via Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6793714 Manufacturer SKU: TUN6793714 Metav SKU: 6793714-Tungaloy Designation: WNMG060412E-TM AH120 Label: WNMG060412E-TM AH120 Manufacturer: Tungaloy Dimensions & core data Corner radius: 1.2 mm Plate thickness: 4.76 mm Insert size: 06 Included angle: 80° Rake angle: 0° ISO code: 060412 Features & materials Material: Hartmetall Coating / sort: AH120 (PVD-coated) Chipbreaker: TM Plate form: trigon Hole: with hole, cylindrical hole Application: Drehen System components: ISO insert, suitable outer holder or boring bar, shim/clamping set, replacement screws FAQ What holder types are compatible with this insert? Compatibility depends on the holder matching the ISO form, clearance angle and mounting style; the WNMG060412E-TM AH120 insert fits holders designed for ISO WNMG plates and uses a cylindrical clamping hole for secure fixation. Which materials can be machined with this grade? The AH120 PVD-coated carbide grade is aimed at wear-resistant, process-secure turning where a sharp cutting edge is required; selection of the correct chipformer and cutting data should be based on the specific workpiece material. How does the TM chipbreaker affect chip control? The TM chipbreaker on the WNMG060412E-TM AH120 promotes short, consistent chips for many turning operations, improving evacuation and reducing the risk of chip entanglement and insert damage. Is this insert suitable for finishing or roughing? With a 1.2 mm corner radius and a sharp PVD-coated edge, the insert can be used for versatile turning tasks; finishing and light-medium turning benefit from the edge quality, while heavier cuts require assessing stability and holder rigidity. What mounting accessories are required for installation? Standard ISO-compatible underlays/shims, a matching clamping screw and a suitable outer holder or boring bar are needed to mount the WNMG060412E-TM AH120 insert securely. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060412 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a universal PVD-coated carbide grade and a stable cutting geometry for reliable medium-duty turning of stainless steels; the trigon WNMG060412 with a 1.2 mm corner radius delivers consistent surface quality and effective chip control. Order the original Tungaloy insert directly via Metav Werkzeuge or consult their application specialists for selection and availability. WNMG060412 AH6225 — Tungaloy indexable turning insert, PVD-coated carbide A WNMG060412 AH6225 indexable insert designed for external and internal turning, combining a sharp yet robust cutting edge with double-sided indexing for efficient workshop use. Trigon insert WNMG060412 for turning applications PVD-coated carbide AH6225 for stainless steels 1.2 mm corner radius for stable cutting edge Double-sided chipbreaker with cylindrical hole High-performance grade for machining stainless steels The AH6225 PVD-coated carbide is formulated as a universal grade for stainless steels, offering a balance between sharpness and edge strength appropriate for medium-duty operations and variable conditions. The coating enhances wear resistance and reduces built-up edge formation, which helps maintain cutting performance over longer tool life. Specified as an ISO-standard indexable insert, this grade supports consistent machining results across common turning tasks while simplifying grade selection for mixed stainless workloads. Precision geometry for consistent surface quality and chip control The trigon shape and a 1.2 mm corner radius provide a reliably shaped cutting edge that resists chipping while producing stable cutting forces. The insert features a double-sided chipbreaker and a cylindrical mounting hole, enabling two usable cutting edges per side and secure clamping in compatible holders. A 0° relief angle ensures the insert sits in many ISO holder geometries without unintended interference; for customers with less technical background, the relief angle is the clearance between the insert flank and the workpiece, which prevents rubbing and ensures clean engagement of the cutting edge. ISO compatibility to reduce setup time and support productivity Delivered as part of an ISO turning insert series, the insert’s compatibility with external holders depends on form, relief angle, tolerance class, fastening method, size and thickness. Using ISO-standard inserts such as this one simplifies inventory and reduces downtime when replacing inserts or switching jobs. The double-sided design and robust grade allow economical index changes instead of full regrinds, contributing to lower tooling costs and smoother production flow. For operations requiring rapid tool changes and reproducible results, the combination of indexable design and a universal PVD-coated grade supports both efficiency and predictable performance. For application advice, stock information or order placement regarding the Tungaloy WNMG060412 AH6225 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930; their consultants provide selection support and delivery details. Technical data Article number: 6966403 Manufacturer SKU: TUN6966403 Dealer SKU: 6966403-Tungaloy Model series: ISO turning indexable inserts Core data Size: 06 ISO designation: 060412 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Insert shape: Trigon Included hole: with hole (cylindrical) Design and special features Grade/coating: AH6225 PVD-coated carbide Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO holder compatibility defined by form, relief angle, tolerance, fastening, size and thickness Brand: Tungaloy FAQ Is this insert suitable for stainless steels? The WNMG060412 AH6225 insert is designed specifically for machining stainless steels; the AH6225 PVD-coated carbide offers a sharp, wear-resistant cutting edge optimised for such materials. How many cutting edges are available per insert? The trigon insert is double-sided with indexing on both faces; this provides multiple usable edges before replacement of the WNMG060412 AH6225 insert becomes necessary. What holder characteristics are required for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening and the insert’s size and thickness; the ISO classification included with the WNMG060412 AH6225 supports use in standard ISO turning holders. What benefits does the PVD coating provide? The PVD coating on the AH6225 grade improves wear resistance and reduces built-up edge, increasing tool life and maintaining cutting performance under changing conditions. Can this insert be used for internal turning as well as external? Yes, the geometry and grade of the WNMG060412 AH6225 make it suitable for both external and internal turning operations when matched with an appropriate holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and broad material coverage to maintain steady productivity in medium turning operations; the PVD-coated AH6225 grade ensures good edge life on stainless steel while the trigon form and cylindrical-hole clamping provide secure, repeatable seating — order directly via Metav Werkzeuge or request consultancy for application-specific recommendations. WNMG 060412 AH6225 WNMG060412E-TM — ISO turning insert for Drehen, PVD-coated carbide — Tungaloy WNMG060412E-TM AH6225 is a trigon-shaped ISO turning insert optimised for external and internal turning, offering a sharp yet stable cutting edge suitable for medium-duty machining of stainless steel. PVD-coated carbide AH6225 for stainless steel Trigon WNMG insert with 80° cutting geometry 1.2 mm corner radius for reliable edge stability Cylindrical-hole clamping, ISO 060412 form Consistent cutting performance for medium turning The PVD coating on the AH6225 grade provides a balance between edge sharpness and wear resistance, developed for reliable performance when machining stainless steel. The trigon plate geometry with an 80° cutting angle gives a versatile compromise between strength and accessibility in external and internal turning operations. With a 1.2 mm corner radius the insert maintains a stable cutting edge under changing conditions, reducing the frequency of index changes and supporting continuous production runs. This combination reduces machine idle time and supports predictable tool-change planning in mixed-batch work. Secure clamping and ISO compatibility minimise setup time Designed as an ISO-compliant turning insert, the WNMG form and cylindrical hole allow straightforward mounting in a wide range of holders and boring bars. The consistent fit, determined by the form, clearance angle and tolerance class, ensures repeatable positioning and reliable seating even under higher cutting forces. A 4.76 mm plate thickness and 0° clearance angle contribute to mechanical stiffness at the cutting edge, which helps preserve surface finish while enabling stable chip flow with the TM chipbreaker. Fewer fixture adjustments mean faster set-up and more time cutting parts. Grade selection and chip control for production stability The AH6225 grade is a PVD-coated carbide developed as a universal solution for stainless steel, giving a sharp initial edge combined with sufficient toughness for intermittent cuts and variable workpiece conditions. The TM chipbreaker is matched to the grade to promote short, controllable chips during common turning strategies, easing coolant and chip handling needs on the shop floor. Selecting this combination supports higher first-pass yields and reduced rework, which positively impacts throughput and overall cost-efficiency. Practical benefits for workshop workflows As part of an ISO turning system the insert integrates with standard holders, clamping sets and replacement screws, simplifying inventory and procurement. The trigon geometry provides three indexed edges per insert, helping to reduce tooling expenditure per machined component. Where process security and predictable tool life are priorities, this PVD-coated carbide solution delivers measurable gains in uptime and surface quality. For applications requiring tailored cutting data, consult machining tables for stainless steel and adapt feed and speed to workpiece rigidity and machine capability. Contact Metav Werkzeuge today for application-specific advice on Tungaloy trigon turning inserts and quick supply of WNMG060412E-TM AH6225 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right insert grade and clamping solution for the task Technical Data Article number: 6947583 Manufacturer article number: 6947583 SKU (vendor): 6947583-Tungaloy Manufacturer SKU: TUN6947583 Model designation: WNMG060412E-TM AH6225 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 06 ISO code: 060412 Cutting geometry: 80° Clearance angle: 0° Special features PVD-coated grade AH6225 Carbide substrate (Hartmetall) Trigon plate form (WNMG) TM chipbreaker Cylindrical-hole clamping ISO turning insert, compatible with external and internal turning Designed for stainless steel machining FAQ What materials is this insert intended for? The WNMG060412E-TM AH6225 insert is specified for machining stainless steel and similar stainless alloys, combining a sharp PVD-coated edge with toughness for medium-duty turning. How is the insert clamped in the holder? Clamping is via a cylindrical hole and standard ISO-compatible seating; the trigon form and tolerance class ensure repeatable positioning in suitable external holders or boring bars. How large is the corner radius and how does it affect finishing? The insert has a 1.2 mm corner radius, which improves edge stability and helps achieve consistent surface finish during medium turning while offering some robustness against interrupted cuts. Is the TM chipbreaker suitable for automated production? Yes. The TM chipbreaker is designed to produce short, controllable chips in typical turning operations, supporting automated chip removal and stable cycle times. Can this insert be used for both external and internal turning? Yes. The ISO WNMG shape and the specified geometry make the insert suitable for both external and internal turning applications where access and rigidity permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 060412 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade with a 1.2 mm corner radius and ISO compatibility delivers stable cutting performance and predictable tool life on rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG060412 AH6225 – Tungaloy indexable insert for turning (PVD-coated carbide, 1.2 mm radius) The WNMG060412 AH6225 is an ISO-standard trigon indexable insert intended for external and internal turning, optimised for machining rostfreier Stahl under variable conditions. PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining 1.2 mm corner radius for stable cutting Trigon shape with cylindrical hole mounting Reliable machining and consistent tool life The combination of a PVD-coated carbide substrate and the AH6225 grade provides a balanced cutting edge designed for medium machining and fluctuating conditions. The coating improves wear resistance and reduces built-up edge formation, which translates into longer usable life per edge and fewer interruptions in production. The 1.2 mm corner radius contributes to edge stability, reducing vibration and enabling more consistent surface finishes during both roughing and light finishing passes. For workshops seeking predictable results on rostfreier Stahl, this configuration reduces rework and helps maintain throughput. Simple integration into ISO-based setups As an ISO-standard trigon insert with a cylindrical hole, the component fits a wide range of indexable toolholders and boring bars when matched by form, clearance angle and tolerance class. The 80° approach angle and 0° clearance listed in the data determine the effective cutting geometry and contact pattern; this makes the insert well suited for conventional external turning and internal operations when the appropriate holder and clamp kit are selected. Compatibility is therefore governed by geometry rather than brand, enabling straightforward replacement cycles and reduced setup time in mixed fleets. Practical benefits for production and selection guidance The double-sided chipbreaker design delivers two cutting edges per index, improving economy without sacrificing edge integrity. The trigon form factor gives three possible indexing positions and a compact edge length that suits medium depths of cut. When working with rostfreier Stahl, choose the AH6225 grade for its balance between a sharp cutting profile and a stable edge—this helps avoid thermal softening and uneven wear under variable feeds and interrupted cuts. For material mixes or specialised needs, the ISO designation and clear geometry data facilitate rapid selection of alternative grades or chipformers while keeping process stability high. For reliable supply and practical application support on Tungaloy inserts, contact Metav Werkzeuge — our consultants provide machining recommendations and rapid delivery for production-critical tooling. Technical data Article number: 6947599 Manufacturer SKU: TUN6947599 SKU: 6947599-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: WNMG060412 Grade / coating: AH6225, PVD-coated carbide Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 06 Approach angle: 80° Clearance angle: 0° Hole: with hole (cylindrical) Special features Trigon insert form Double-sided chipbreaker ISO-standard geometry for holder compatibility Suited to rostfreier Stahl machining Application: Turning (external and internal) FAQ What machining tasks is this insert best suited to? The WNMG060412 AH6225 insert is designed for external and internal turning, offering a balance of sharpness and edge stability suitable for medium cutting conditions and rostfreier Stahl. How is the insert mounted and indexed? Mounting uses the cylindrical hole to secure the insert in an ISO-compatible holder; the trigon shape provides multiple indexing positions for economical edge use. How does the AH6225 grade perform on rostfreier Stahl? The AH6225 PVD-coated carbide provides improved wear resistance and a stable cutting edge that helps control built-up edge and maintain surface quality when machining rostfreier Stahl. Is the insert suitable for interrupted cuts or variable conditions? Yes, the combination of the 1.2 mm corner radius and the coated carbides gives enhanced edge robustness for interrupted cuts and changing machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com