WNMG 080404 AH6225 Wendeplatten - Tungaloy
Efficient performance in stainless-steel turning is achieved through the combination of a PVD-coated carbide grade designed for a sharp, stable cutting edge, a trigon geometry for secure seating, and a double-sided chipbreaker for consistent chip control; order the insert directly via Metav Werkzeuge or consult our technical team for configuration advice. WNMG080404 AH6225 — WNMG indexable insert for turning by Tungaloy WNMG080404 AH6225 is an ISO-standard indexable turning insert engineered for medium turning operations in stainless steel, offering a sharp yet stable cutting edge and reliable chip control. WNMG 080404 geometry, trigon insert PVD-coated carbide grade AH6225 Optimised for stainless-steel turning Double-sided chipbreaker, radius 0.4 mm Consistent cutting performance for stainless-steel machining The PVD-coated AH6225 carbide composition delivers a balance between edge sharpness and wear resistance suited to varying conditions in stainless-steel turning. The coating improves hot-hardness and reduces built-up edge, which leads to more predictable tool life and a steady surface finish. The trigon form with an 80° included angle provides a robust cutting edge that tolerates moderate interruptions and supports stable axial and radial forces during external and internal turning. Secure mounting and compatibility with ISO tooling systems As an ISO-standard insert, compatibility with holders is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness. The trigon shape, cylindrical hole and a plate thickness of 4.76 mm ensure secure clamping in matched outer holders or boring bars. The 0° clearance angle and the specified 0.4 mm corner radius provide defined engagement geometry that simplifies setup and repeatability, while the double-sided arrangement offers economical indexing options for workshops seeking quick tool changes. Productivity advantages and practical selection guidance The integrated double-sided chipbreaker promotes stable chip formation, reducing the risk of long, stringy chips in stainless-steel applications and easing chip evacuation. For efficient production, select the chipbreaker and grade combination based on workpiece material, the intended machining operation and machine stability; the AH6225 grade is a universal choice for stainless steel in medium cutting regimes. When paired with a suitably rigid holder and consistent feeds, the insert contributes to lower tooling costs per component and improved process reliability. For dependable stainless-steel turning, specify the Tungaloy AH6225 grade and contact Metav Werkzeuge for ordering and application support. Technical data Article number: 6947606 SKU: 6947606-Tungaloy Manufacturer SKU: TUN6947606 Designation: WNMG080404 AH6225 Facts Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Size designation: 08 Special features Material: carbide Coating: PVD Grade: AH6225 Geometry: trigon Hole style: cylindrical hole Chipbreaker: double-sided Standard: ISO turning indexable insert Typical application: turning (external and internal) Optimised for: stainless steel FAQ What materials is this insert intended for? The insert in WNMG080404 AH6225 is optimised for stainless steel; the AH6225 grade and chipbreaker combination are selected for reliable performance on a wide range of stainless-steel alloys. How does the chipbreaker affect machining? The double-sided chipbreaker on this Tungaloy turning insert improves chip control and promotes stable chip formation, which helps maintain surface quality and reduces the risk of chip-related interruptions. Which holders are compatible with the WNMG080404 shape? Compatibility depends on matching the insert form, size, clearance angle and fastening method; the ISO-standard WNMG geometry pairs with outer holders or boring bars designed for WNMG 08 inserts and a cylindrical-hole fastening. Is the insert suitable for internal and external turning? Yes, the indexable insert is designed for both external and internal turning operations, provided the correct holder and cutting data are used for the specific stainless-steel application. How many usable edges are available on the insert? The insert features a double-sided configuration and indexable trigon form, allowing economical indexing; specific usable edges depend on the insert orientation and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and a 0.4 mm nose radius delivers stable cutting and consistent surface finishes for medium-duty turning. Order directly via Metav Werkzeuge or consult the team for application-specific advice. WNMG080404-ZF AH6225 — ISO turning insert, PVD-coated carbide, 0.4 mm radius (Tungaloy) The WNMG080404-ZF AH6225 is an ISO-format indexable turning insert optimised for machining stainless steels, featuring a ZF chipbreaker for controlled chip formation in varied conditions PVD-coated carbide for stainless steels 0.4 mm nose radius for fine surface finish ISO-format trigon shape, 4.76 mm thickness ZF chipbreaker for stable chip control Precision and edge stability for continuous production The AH6225 grade combines a PVD-coated surface with a tough carbide substrate to provide a balance between edge sharpness and wear resistance. This results in a consistently sharp and stable cutting edge during medium cutting depths and fluctuating machining conditions. The 0.4 mm nose radius improves the contact geometry at the tool tip, enhancing surface finish while maintaining sufficient edge strength to avoid premature chipping during interrupted cuts. Such characteristics reduce rework and support steady production throughput. Optimised chip control and reliable stainless-steel performance A chipbreaker labelled ZF is designed to break and evacuate chips effectively when machining stainless steels, lowering the risk of built-up edge and thermal work hardening. The AH6225 grade’s coating improves oxidation and adhesive wear resistance, which is particularly relevant for materials prone to work hardening. This combination promotes longer tool life and more predictable tool changes, helping to shorten overall machining cycles and maintain consistent component quality. ISO-system compatibility for straightforward integration Compatibility with clamping systems is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. The trigonal (trigon) shape and a thickness of 4.76 mm make the insert suitable for a wide range of ISO-format holders. The insert is supplied with a cylindrical centre hole to match standard locating pins and screws; a complete cutting system requires a matching external holder, shim/clamp set and replacement screws. Clear specification of these parameters simplifies set-up, reduces trial-and-error and ensures reproducible clamping and stiffness in the tool assembly. For reliable stainless-steel turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for availability and tailored tooling advice via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Manufacturer article number: 6947528 SKU: 6947528-Tungaloy Label: WNMG080404-ZF AH6225 Core specifications Nose radius: 0.4 mm Thickness: 4.76 mm Insert size: 08 Included angle: 80° Relief angle: 0° Features & compatibility Shape: trigon Hole: cylindrical Chipbreaker: ZF Coating: PVD Material: carbide Grade: AH6225 Application: Turning Model series: ISO turning indexable inserts Suitable for: stainless steels FAQ What materials is this insert suitable for? The WNMG080404-ZF AH6225 insert (Tungaloy indexable turning insert, SKU 6947528-Tungaloy) is optimised for machining stainless steels, offering reduced adhesive wear and controlled chip formation. How does the 0.4 mm nose radius affect finish and strength? A 0.4 mm nose radius improves surface finish by enlarging the contact area and reducing scallop height while retaining sufficient edge strength for medium-duty turning with fewer chipping events. Which chip control can be expected from the ZF chipbreaker? The ZF chipbreaker provides reliable chip segmentation and evacuation in varied cutting conditions, reducing the likelihood of long, stringy chips and improving thermal stability during stainless-steel turning. How to ensure holder compatibility with this ISO insert? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness. Verify the holder accepts WNMG trigon inserts with a 4.76 mm thickness and an 80° included angle. What distinguishes the AH6225 grade? AH6225 is a universal PVD-coated carbide grade designed to combine a sharp cutting edge with good stability, making it suitable for changing conditions and reliable performance on stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH6225 Wendeplatten - Tungaloy
Reliable choice for demanding turning operations: combine the PVD-coated carbide AH6225 with the TS chipbreaker and trigon geometry for a stable cutting edge and consistent chip control. Order directly via Metav Werkzeuge or consult the technical team for holder matching and cutting parameter advice. WNMG 080404 AH6225 — ISO turning insert, PVD-coated carbide, Tungaloy The WNMG080404-TS AH6225 is an ISO-standard trigon turning insert designed for general turning, optimised for stainless steel and medium cutting conditions. Trigon form for secure clamping PVD-coated carbide grade AH6225 Designed for stainless steel turning 0° clearance and 0.4 mm corner radius Consistent performance from a PVD-coated carbide grade The combination of PVD-coated carbide AH6225 and the TS chipbreaker delivers a reliable balance between sharpness and edge stability, especially during variable cutting conditions. The PVD coating improves wear resistance while preserving a keen cutting geometry, which supports stable tool life under medium-duty turning. This characteristic makes the insert particularly suitable for applications where repeatable metal removal rates and predictable tool behaviour are priorities, reducing downtime and supporting a steady production flow. Geometry and dimensions that secure repeatable results The insert’s trigon shape and central cylindrical hole ensure positive clamping and repeatable positioning in standard ISO holders; compatibility depends on form, clearance, tolerance class, fastening, size and thickness. The 80° included angle together with 0° clearance, a 0.4 mm corner radius and a plate thickness of 4.76 mm contribute to robust edge support and controlled engagement with the workpiece. These geometric choices reduce chatter, improve surface finish and simplify the selection of a matching holder or boring bar for consistent outcomes. Practical system-level benefits for workshop efficiency This ISO insert is intended for both external and internal turning and forms part of a conventional system: an ISO insert, a matched exterior holder or boring bar, a shim/clamp set and replacement screws. The TS chipbreaker is optimised for stainless steel behaviour to promote favourable chip formation and evacuation, lowering the risk of built-up edge and protecting the workpiece surface. In production terms, the result is improved process reliability, easier inventory management through standard ISO sizing and the potential for higher uptime when the insert is paired with suitable machining parameters and a correctly specified holder. Contact Metav Werkzeuge today for ordering and tailored application support — info@metav-werkzeuge.com · +49 2822 7131930 — specialists can assist with holder matching and recommended cutting data for optimal results Technical Data Article number: 6947545 Manufacturer SKU: TUN6947545 SKU: 6947545-Tungaloy Model series: ISO turning indexable inserts Designation: WNMG080404-TS AH6225 Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size: 08 ISO code: 080404 Special features PVD-coated carbide AH6225 TS chipbreaker for stainless steel Trigon plate form Cylindrical central hole Intended application: turning (external and internal) Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert optimised for? The AH6225 grade and TS chipbreaker are optimised for stainless steel; the insert is specified primarily for turning applications on stainless alloys. What does the TS chipbreaker provide in practice? The TS chipbreaker promotes controlled chip formation and evacuation when machining stainless steel, reducing the risk of built-up edge and improving surface integrity. How is compatibility with a holder ensured? Compatibility is ensured by matching the insert’s form, clearance angle, tolerance class, fastening arrangement, size (08) and plate thickness (4.76 mm) with the holder’s specifications. What cutting tasks suit this insert best? The insert is intended for external and internal turning in medium cutting operations and variable conditions where a balance of sharpness and edge stability is required. What are the key dimensions to check when ordering? Key dimensions include the 0.4 mm corner radius, 4.76 mm plate thickness, 80° included angle, 0° clearance and trigon plate form; these determine fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH6225 Wendeplatten - Tungaloy
Take advantage of the universal AH6225 grade, its PVD-coated carbide substrate and the optimised TF chipbreaker for reliable mid-range turning of stainless steel; order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and machining advice. WNMG 080404 AH6225 – ISO turning indexable insert by Tungaloy A WNMG080404-TF AH6225 turning insert engineered for external and internal turning, offering a trigon profile with a cylindrical hole for secure clamping and consistent edge stability. PVD-coated carbide grade AH6225 Optimised TF chipbreaker for stable chips Trigon profile with 0.4 mm corner radius Consistent cutting performance for stainless steel The combination of the AH6225 grade and PVD-coated surface yields a cutting edge that is both sharp and stable, designed specifically for machining stainless steel under varying conditions. The substrate provides wear resistance while the coating reduces adhesion and heat build-up, which helps maintain dimensional stability over longer tool life. With a corner radius of 0.4 mm, the insert balances edge strength and surface finish, making it suitable for moderate cutting depths where tool reliability and repeatable results are required. Secure clamping and ISO compatibility for straightforward tool setup This insert is supplied in the ISO format and features a trigon plate form with a cylindrical hole, ensuring positive location and easy retention by standard holders. The included-angle geometry of 80° and the 0° clearance angle are matched to typical holder designs; compatibility is therefore determined by form, clearance angle, tolerance class, fastening method, size and thickness. The system concept involves the indexable insert, an appropriate external holder or boring bar, a supporting shim/locking set and replacement screws, which together enable rapid replacement and consistent clamping accuracy. Operational benefits that improve productivity and part quality The TF chipbreaker is optimised for chip control during both external and internal turning, producing manageable chips and reducing interruptions for chip removal. By selecting a universal grade like AH6225 and matching the chipbreaker to the workpiece and stability of the setup, machining cycles can be standardised and tool change frequency reduced, contributing to lower process costs and greater uptime. Surface integrity and repeatability are supported by the insert’s geometry and coating, which together enable reliable finishes on stainless steel with fewer adjustments. For robust and economical turning with Tungaloy performance, order the WNMG 080404 AH6225 insert via Metav Werkzeuge or request application guidance from their consultants at Metav Werkzeuge. Technical data Article number: 6947505 SKU: 6947505-Tungaloy Manufacturer SKU: TUN6947505 Model series: ISO turning indexable inserts Material: carbide Facts ISO code: 080404 Corner radius: 0.4 mm Included angle: 80° Plate thickness: 4.76 mm Plate size: 08 Clearance angle: 0° Special features Trigon plate form Cylindrical hole (with hole) Chipbreaker TF Grade AH6225, PVD-coated carbide Designed for stainless steel For external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This insert is designed primarily for machining stainless steel; the AH6225 grade and PVD coating are selected to handle stainless applications with stable edge life. How does the TF chipbreaker affect machining? The TF chipbreaker on the WNMG080404-TF AH6225 controls chip formation to produce short, manageable chips and supports stable cutting in typical mid-range turning operations. Which holder types are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening and size; the trigon shape and cylindrical hole are intended for standard ISO external holders and boring bars. What is the meaning of the designation 080404? The code 080404 identifies the ISO size and geometry of the insert; it corresponds to the plate size, thickness and geometry family used across ISO turning insert standards. Are replacement screws and shims required for mounting? A complete system comprises the insert, a matching holder or boring bar, supporting shim/locking set and replacement screws; the insert is intended to be mounted with such standard clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH6235 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide and a SDM chipbreaker for dependable performance in stainless steel turning; the insert’s 0.4 mm corner radius and trigon geometry provide a balance of strength and accessibility. Order the WNMG080404-SDM AH6235 via Metav Werkzeuge or contact the consultants for tailored recommendations. WNMG080404-SDM AH6235 ISO trigon insert for turning, PVD-coated carbide, SDM chipbreaker WNMG080404-SDM AH6235 – a trigon-shaped, ISO‑standard turning insert designed for external and internal turning where stainless steels and interrupted cuts demand resistance to chipping and consistent tool life ISO trigon insert, 80° included angle PVD-coated AH6235 grade for stainless steel SDM chipbreaker for interrupted cuts 0.4 mm corner radius, 4.76 mm thickness Consistent cutting performance for stainless steel turning The PVD-coated carbide grade AH6235 is formulated for tougher machining tasks, delivering improved resistance to edge chipping in stainless steel and applications with interrupted cuts. The trigon geometry and 80° included angle concentrate cutting forces across a stable edge, which supports reliable surface finish and predictable wear behaviour. Selecting this insert reduces the need for frequent edge changes and helps maintain machine uptime – a direct contribution to production efficiency. Clear guidance on fitment and holder compatibility As an ISO-standard insert, compatibility with the toolholder depends on shape, relief angle, tolerance class, fastening and plate thickness. The insert’s 0° relief specifies a neutral clearance suited to many standard external holders and boring bars. The presence of a cylindrical mounting hole secures repeatable clamping; verify the holder form and clearance profile to ensure correct seating. For complex setups or doubt about tolerance classes, consult technical advice to match the insert to the correct external holder and clamping kit. Reliable chip control and durability in demanding cuts The SDM chipbreaker is engineered for controlled chip formation under variable cutting conditions, especially where interrupted cuts or built-up edge risk occurs. A 0.4 mm corner radius offers reinforced edge strength while still allowing access to tighter profiles, and the plate thickness of 4.76 mm contributes to edge stability under load. Together, these features produce consistent chip flow and reduce the incidence of catastrophic edge failure, supporting longer tool life and steadier component quality. For machining tasks that prioritise process security in stainless steel turning, contact Metav Werkzeuge to request Tungaloy WNMG080404-SDM AH6235 inserts or tailored application advice; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical data Article number: 6892231 Manufacturer SKU: TUN6892231 Metav SKU: 6892231-Tungaloy Model series: ISO turning inserts Designation: WNMG080404-SDM AH6235 Application: Turning Dimensions & core data Corner radius: 0.4 mm Thickness: 4.76 mm Included angle: 80° Relief angle: 0° Size: 08 Plate form: trigon Features & materials Material: carbide Grade/coating: AH6235 (PVD-coated) Chipbreaker: SDM Mounting hole: cylindrical Typical use: external and internal turning, interrupted cuts FAQ Which materials is this insert best suited for? The WNMG080404-SDM AH6235 insert is optimised for stainless steel machining and for situations with an increased risk of edge breakout, thanks to its tougher AH6235 grade. How does the SDM chipbreaker affect machining? The SDM chipbreaker on this grade promotes controlled chip formation under varying cutting conditions, improving process reliability during interrupted cuts and reducing edge stress. What dimensions are important when selecting a holder? Key dimensions are the size 08, thickness 4.76 mm, 0.4 mm corner radius and the cylindrical mounting hole; compatibility also depends on relief and tolerance class for correct seating. Is this insert suitable for internal turning and boring bars? Yes; the trigon form and 80° included angle allow use in many internal turning applications, provided the chosen holder matches the ISO form and clamping requirements. What identification should be quoted when ordering replacements? Reference the designation WNMG080404-SDM AH6235 and article number 6892231 to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH6235 Wendeplatten - Tungaloy
WNMG080404 AH6235 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die WNMG080404-SM AH6235 ist eine ISO-Drehwendeschneidplatte für das Drehen von rostfreiem Stahl und für unterbrochene Schnitte mit erhöhter Ausbruchgefahr PVD-beschichtetes Hartmetall für hohe Standzeit Zähe Sorte für rostfreien Stahl und Unterbrechungen Trigon-Form sorgt für sichere Spannlage Mit zylindrischem Loch für stabile Befestigung Eckenradius 0,4 mm für präzise Konturen Produktive Zerspanung bei rostfreiem Stahl dank zäher Sorte Die WNMG080404-SM AH6235 kombiniert einen zähen Schneidstoff mit einer PVD-beschichtung, wodurch die Wendeschneidplatte speziell bei Bearbeitung von rostfreiem Stahl und bei unterbrochenen Schnitten eine reduzierte Ausbruchneigung bietet. Diese Auslegung führt zu längeren Standzeiten und weniger Werkzeugwechseln, sodass die Produktivität auf der Maschine steigt. Die zähe Zusammensetzung der Sorte AH6235 unterstützt eine stabile Spanbildung bei anspruchsvollen Einsatzbedingungen. Hohe Prozesssicherheit durch Material und Beschichtung Mit Hartmetall als Grundmaterial und einer PVD-Beschichtung wird Verschleißresistenz mit thermischer Stabilität kombiniert. PVD steht für physikalische Dampfabscheidung und sorgt für eine harte, dünne Schicht, die Schneidkantenfestigkeit und Reibungsreduzierung verbessert. Für Anwender bedeutet das planbare Werkzeugstandzeiten und konstante Oberflächengüten bei Serienbearbeitung, was Rüstaufwand und Stillstandzeiten senkt. Passgenau im Systemaufbau für ISO-genormte Halter Die Platte ist ISO-genormt; die Kompatibilität zum Halter ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Durch die Trigon-Plattenform und das zylindrische Loch ist eine sichere Lage im Außenhalter oder in der Bohrstange gewährleistet. Die Plattendicke von 4,76 mm und der Freiwinkel von 0° sind zu berücksichtigen, damit die Schnittgeometrie am Maschinenaufbau optimal genutzt wird. Präzision bei Konturen und sichere Befestigung Der Eckenradius von 0,4 mm erlaubt feine Konturarbeiten und sorgt bei Profilen für wiederholgenaue Ergebnisse. Die Kombination aus Trigon-Form und Lochaufnahme erleichtert das Wechseln und gewährleistet zugleich eine stabile Klemmbefestigung, was Vibrationen reduziert und die Standzeit erhöht. Anwender profitieren von gleichbleibender Bearbeitungsqualität bei Außen- und Innendrehen. Bestellen Sie die WNMG080404-SM AH6235 von Tungaloy über Metav Werkzeuge oder kontaktieren Sie unsere Anwendungstechnik per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 für individuelle Beratung Produktmerkmale Artikelnummer: 6890146 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080404-SM AH6235 SKU: 6890146-Tungaloy Fakten Eckenradius: 0,4 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet Sorte: AH6235 (zähere Sorte für rostfreien Stahl, unterbrochene Schnitte, erhöhte Ausbruchgefahr) Spanbrecher: SM Plattenform: Trigon Lochstil: zylindrisches Loch Anwendung: Drehen Einsatz: Außen- und Innendrehen Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke FAQ Für welche Werkstoffe ist die Platte geeignet? Die WNMG080404-SM AH6235 von Tungaloy ist speziell für rostfreien Stahl ausgelegt; die zähe Sorte AH6235 reduziert Ausbrüche bei unterbrochenen Schnitten und erhöht die Prozesssicherheit. Ist die Platte PVD-beschichtet und warum ist das wichtig? Ja, die Wendeschneidplatte ist PVD-beschichtet; die Beschichtung erhöht die Verschleißfestigkeit und reduziert Reibung, was zu konstanter Schneidkantenleistung führt. Welche Halter passen zur ISO-Platte? Kompatible Halter sind ISO-konforme Außenhalter oder Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke beachtet werden müssen. Für welche Bearbeitungsarten eignet sich der Eckenradius 0,4 mm? Ein Eckenradius von 0,4 mm eignet sich für präzise Konturarbeiten und feine Profilbearbeitung, besonders dort, wo genaue Konturen und Oberflächenqualität gefragt sind. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte AH6235 wurde für Anwendungen mit unterbrochenen Schnitten und erhöhter Ausbruchgefahr entwickelt und bietet hierfür stabile Spanbildung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080404 AH6235 Wendeplatten - Tungaloy
WNMG 080404 AH6235 Drehwendeschneidplatte zum Drehen von Tungaloy Die WNMG080404-SS AH6235 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen an rostfreiem Stahl. Hohe Zähigkeit für unterbrochene Schnitte PVD-beschichtung erhöht Verschleißfestigkeit Trigonform mit robustem Eckenradius 0,4 mm Kompatibel zu ISO-Außenhaltern und Bohrstangen Mit zylindrischem Loch für sichere Befestigung Präzise Werkstoffbearbeitung mit robuster Schneidkante Die WNMG080404-SS AH6235 kombiniert PVD-beschichtetes Hartmetall mit einer zäheren Sorte, speziell entwickelt für die Bearbeitung von rostfreiem Stahl und Beanspruchungen mit erhöhter Ausbruchgefahr. Die Beschichtung verbessert die Verschleißfestigkeit und verzögert Kantenverschleiß, sodass sich Standzeiten verlängern und Maschinenlaufzeiten produktiver genutzt werden können. Der 0,4 mm Eckenradius bietet einen Kompromiss aus Stabilität und Schnittschärfe für universelle Drehanwendungen. Systemintegration und Prozesssicherheit für effiziente Fertigung Als Teil der ISO-Drehwendeschneidplatten ist die Platte auf normative Passformen ausgelegt; die Kompatibilität zu Haltern hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Anwender profitieren durch planbare Wechselzyklen und reproduzierbare Ergebnisse, wenn Spanformer und Sorte auf Werkstoff und Bearbeitungsart abgestimmt werden. Diese Auslegung unterstützt eine effiziente Fertigung und reduziert Ausschuss sowie Nacharbeit. Praktische Anwendungsempfehlungen und einfache Handhabung Die Trigonform liefert mehrere nutzbare Schneidkanten und die zylindrische Lochbohrung sorgt für sichere Fixierung im Klemmsatz. Für unterbrochene Schnitte und schwer zerspanbare rostfreie Stähle empfiehlt sich die Verwendung der SS-Spanbrecher in Kombination mit moderaten Schnittwerten, um Ausbrüche zu vermeiden. Die Plattendicke 4,76 mm und der 80° Winkel unterstützen stabile Auflagebedingungen im Außen- und Innendrehen; dadurch lässt sich die Werkzeugstandzeit im täglichen Einsatz optimieren. Erwerben Sie die WNMG080404-SS AH6235 direkt bei Metav Werkzeuge oder kontaktieren Sie unsere technische Beratung für die passende Halterempfehlung und Schnittwerte; eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6890144 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080404-SS AH6235 Hersteller SKU: TUN6890144 Fakten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Schneidstoff: Hartmetall Beschichtung: PVD-beschichtet (hartstoffschicht zur verschleißminderung) Sorte: AH6235 (zähere Sorte für rostfreie Stähle) Spanbrecher: SS (für rostfreie Stähle, reduziert Ausbruchgefahr) Plattenform: Trigon (mehrere Schneidkanten) Loch: mit Loch — zylindrisches Loch Einsatzgebiet: Drehen, Außen- und Innendrehen Systemhinweis: Kompatibilität abhängig von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke FAQ Welche Werkstoffe eignen sich für die WNMG080404-SS AH6235? Die WNMG080404-SS AH6235 von Tungaloy ist insbesondere für rostfreien Stahl ausgelegt; die zähere Sorte AH6235 und der SS-Spanbrecher mindern Ausbruchneigung bei unterbrochenen Schnitten. Welche Vorteile bietet die PVD-Beschichtung bei dieser Wendeplatte? Die PVD-beschichtung der WNMG080404-SS AH6235 verbessert die Verschleißfestigkeit und Haftbeständigkeit der Schneidkante, was zu längeren Standzeiten und stabileren Bearbeitungsergebnissen führt. Wie wird die Kompatibilität mit Haltern sichergestellt? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; prüfen Sie Halterdatenblätter und wählen Sie einen passenden ISO-Außenhalter oder eine Bohrstange. Für welche Bearbeitungsfälle ist der SS-Spanbrecher vorgesehen? Der SS-Spanbrecher ist für die Zerspanung von rostfreiem Stahl optimiert und eignet sich besonders bei Anwendungen mit erhöhter Ausbruchgefahr oder intermittierenden Schnitten. Wie viele nutzbare Schneidkanten bietet die Trigonform? Die Trigonform der WNMG080404-SS AH6235 stellt mehrere nutzbare Schneidkanten zur Verfügung, was die Wirtschaftlichkeit erhöht, da die Platte nach dem Drehen einfach gedreht und weiterverwendet werden kann. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080404 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough PVD-coated carbide grade and a proven TM chipbreaker to achieve reliable performance in stainless-steel turning and interrupted cuts; combine long edge life, consistent chip control and ISO compatibility for smooth production. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. WNMG080404-TM AH6235 — ISO turning insert (trigon, 80°) by Tungaloy The WNMG080404-TM AH6235 is an ISO-standard trigon turning insert engineered for external and internal turning, optimised for stainless steels and interrupted cutting conditions. PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts ISO WNMG 080404 trigon insert, 80° 0.4 mm corner radius for secure edge strength Robust grade for demanding stainless-steel machining The insert uses a PVD-coated carbide grade AH6235, a tougher formulation designed to resist chipping during interrupted cuts and to handle the work-hardening tendencies of stainless steels. The combination of substrate toughness and thin hard coating improves edge durability without sacrificing cutting performance, which reduces the frequency of index changes and contributes to predictable tool life. With the TM chipbreaker geometry, swarf formation is controlled to lower the risk of built-up edge and to support consistent surface finish in varied cutting conditions. Precise geometry and secure clamping for repeatable results As an ISO trigon insert with an 80° approach angle and a nominal 0° clearance, the component provides a versatile geometry for many external and internal turning tasks. The 0.4 mm corner radius delivers a reliable cutting edge for finishing passes while still permitting modest roughing engagement where stability permits. A cylindrical locating hole ensures positive seating in compatible holders; compatibility depends on matching form, clearance, tolerance class, fastening method, size and thickness. The insert thickness (4.76 mm) and size 08 format conform to common ISO holders, enabling straightforward integration into established tool systems. Raise productivity while reducing rework and downtime Selecting the right grade and chipbreaker translates directly into process benefits: extended edge life, improved surface finish, and fewer interrupted cycles for tool changes. The insert’s formulation and chip control reduce the incidence of sudden edge breakouts, which lowers scrap rates and rework. For operations seeking consistent, economical throughput, this combination of geometry and AH6235 wear behaviour supports stable cycle times and reliable part quality, contributing to measurable cost-efficiency over production runs. Contact Metav Werkzeuge for tailored application advice on the Tungaloy WNMG080404-TM AH6235 PVD-coated carbide insert and for rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903432 SKU: 6903432-Tungaloy Manufacturer SKU: TUN6903432 Manufacturer: Tungaloy Core data ISO designation: 080404 Shape: trigon (WNMG) Size: 08 Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Coating / grade: AH6235 (PVD-coated carbide) Chipbreaker: TM Typical application: external and internal turning; interrupted cuts Material: carbide System: ISO turning insert compatible with standard WNMG holders Recommended where increased breakout resistance and improved chip control are required FAQ What materials is this insert best suited for? The WNMG080404-TM AH6235 insert is optimised for stainless steels and works well in applications with interrupted cuts, offering improved resistance to chipping. What does the TM chipbreaker provide? The TM chipbreaker on the AH6235 grade promotes controlled chip formation and evacuation, reducing built-up edge and helping to maintain consistent surface finish during turning operations. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and finish capability: it provides a resilient cutting edge for stable passes while allowing fine surface quality where machine and workpiece rigidity permit. Is this insert ISO-compatible with common external holders? Yes; the insert follows ISO WNMG dimensions. Compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness with the holder. What thickness and hole style does the insert have? The insert is 4.76 mm thick and features a cylindrical locating hole for secure seating in compatible clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH725 Wendeplatten - Tungaloy
Take advantage of a combination of high process reliability and universal material coverage: the PVD-coated AH725 grade delivers stable chip formation on Stahl and rostfreier Stahl, while the trigon geometry and 80° included angle support robust clamping and predictable tool life. Order directly via Metav Werkzeuge or contact the technical team for matching holders and clamping sets. WNMG 080404 AH725 WNMG080404-TM — ISO turning insert, PVD-coated, 0.4 mm radius | Tungaloy WNMG080404-TM AH725 is an ISO-standard turning insert designed for external and internal turning, optimised for mixed-material production where process security and consistent edge behaviour are required ISO tool geometry WNMG form, 80° trigon PVD-coated AH725 for process security 0.4 mm corner radius for precise finishing Stable productivity for mixed-material turning The trigon WNMG geometry with an 80° included angle combines rigidity with accessible cutting edges, enabling steady cutting conditions on a variety of workpieces. The insert is manufactured from carbide (Hartmetall) and finished with a PVD-coated AH725 grade that is engineered for universal, chip-resistant performance on Stahl and rostfreier Stahl. This results in fewer interruptions for edge changes and predictable component tolerances, which supports higher machine utilisation and improved throughput. Reliable edge control and wear resistance for process safety The AH725 coating provides enhanced adhesion and edge strength, helping to prevent premature chipping under varying cutting conditions. The 0.4 mm corner radius balances robustness and surface finish, allowing for controlled cutting forces and good dimensional stability. For users seeking straightforward terminology: the PVD layer increases thermal and abrasive resistance, so the insert keeps its geometry longer and maintains machining quality under repeated cycles. Compatibility and handling that reduce downtime As an ISO-standard indexable insert, the component fits holders that match form, relief angle, tolerance class, fastening method, size and thickness; the system typically comprises an outer holder or boring bar, a shim/clamp set and spare fastening screws. The insert includes a cylindrical hole for positive locating and secure clamping, which simplifies indexing and replacement. Specifying the correct chipbreaker and grade for the workpiece and machining strategy ensures process reliability and efficient tool consumption. Contact Metav Werkzeuge for tailored advice on Tungaloy AH725 inserts, holder compatibility and optimal cutting parameters — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6862360 Manufacturer SKU: TUN6862360 Label / name: WNMG080404-TM AH725 Model series: ISO-Drehwendeschneidplatten Key measurements Corner radius: 0.4 mm Plate thickness: 4.76 mm Included angle: 80° Size designation: 08 Materials & features Material: Hartmetall (carbide) Coating: PVD (AH725) Geometry: trigon (WNMG) Chipbreaker style: TM Hole: with cylindrical hole Typical application: Drehen (external and internal turning) FAQ Is this insert suitable for both external and internal turning? The WNMG080404-TM AH725 insert is designed for both external and internal turning operations and is compatible with ISO-standard holders when the holder form and tolerance match the insert geometry. Which materials are recommended for the AH725 grade? The AH725 PVD-coated grade is intended for universal use on Stahl and rostfreier Stahl, offering stable chip formation and reliable edge life in mixed-material production. What does the TM chipbreaker mean for cutting performance? The TM chipbreaker is configured to support medium to general-purpose chip control; paired with the AH725 grade it promotes predictable chips and reduced risk of built-up edge in interrupted or varied cutting conditions. How does the 0.4 mm corner radius affect surface finish and strength? A 0.4 mm radius provides a compromise between edge strength and achievable surface finish: it improves durability compared with very small radii while still allowing fine finishing strategies when required. Can the insert be mounted in any WNMG holder? The insert fits holders that conform to ISO specifications; compatibility depends on matching form, relief angle, tolerance class, fastening and thickness — verify holder specifications before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8005 Wendeplatten - Tungaloy
Benefit from dependable, wear-resistant performance thanks to the PVD-coated AH8005 grade and the stable 80° trigon geometry; order the insert directly via Metav Werkzeuge or ask the consultants for machining recommendations. WNMG 080404 AH8005 turning insert — PVD-coated carbide, trigon 80° A WNMG080404-HRM AH8005 ISO turning insert engineered for external and internal turning of heat-resistant alloys and other hard materials where stable cutting and extended tool life are required. PVD-coated carbide AH8005 for high wear resistance Trigon (WNMG) 80° geometry for stable turning 0.4 mm corner radius for predictable chip control Cylindrical hole mounting, ISO-compatible insert Longer tool life for demanding materials The combination of a PVD-coated surface and the AH8005 carbide grade provides higher resistance to abrasive and thermal wear, which leads to more consistent performance in extended runs. For operations on heat-resistant alloys and other hard workpiece materials, the coating reduces flank wear and preserves the cutting edge for longer, meaning fewer disruptions for tool changes and improved process reliability. This results in better overall equipment efficiency and lower per-part tooling cost. Geometry and chip control for stable machining The trigon insert geometry with an 80° included angle and a 0° relief angle gives a robust cutting edge that resists deflection during heavy cuts. The HRM chipbreaker paired with the 0.4 mm corner radius supports predictable chip formation and evacuation in both roughing and finishing passes. For machinists, this translates into improved surface finish and reduced risk of built-up edge, provided the insert is matched to the workpiece material and the holder offers adequate rigidity. ISO compatibility and straightforward integration Designed as an ISO-standard insert, the WNMG080404-HRM fits into common external holders and boring bars when holder shape, clearance, tolerance class, fastening and plate thickness match the specification. The insert features a cylindrical hole for secure mounting and a plate thickness of 4.76 mm, simplifying retrofit into existing tool systems. Using standardised inserts helps maintain process repeatability and eases inventory management across workshops. Practical application advice for productivity gains Optimise cycle times by selecting the appropriate chipbreaker and matching cutting parameters to machine power and part stability; this insert is intended for external and internal turning where a stable setup is achievable. When installed in a rigid holder and combined with suitable feeds and speeds, users can expect fewer interruptions for index changes and consistent dimensional results, supporting higher throughput and predictable tool life for batch production. For application-specific advice and supply of Tungaloy turning inserts such as the WNMG080404-HRM AH8005, contact Metav Werkzeuge for technical consultancy and procurement assistance. Technical Data Article number: 6741701 Manufacturer SKU: TUN6741701 SKU: 6741701-Tungaloy Core specifications Insert designation: WNMG080404-HRM ISO code: 080404 Size: 08 Thickness: 4.76 mm Included angle: 80° Relief angle: 0° Corner radius: 0.4 mm Mounting: cylindrical hole Design & features Material: PVD-coated carbide Grade: AH8005 Chipbreaker: HRM Shape: trigon Application: external and internal turning Series: ISO turning inserts FAQ What materials is this insert optimised for? The WNMG080404-HRM AH8005 is optimised for heat-resistant alloys and other hard materials; the PVD-coated carbide composition provides enhanced wear resistance for these applications. Can the insert be used for both external and internal turning? Yes — the design and mounting style make the insert suitable for both external and internal turning operations when combined with an appropriate holder and stable setup. How does the HRM chipbreaker affect machining? The HRM chipbreaker promotes controlled chip formation, improving evacuation and reducing the chance of built-up edge; in practice, this supports better surface finishes and predictable cutting forces. What mounting features should a compatible holder have? A compatible holder must match the insert form, size, thickness and fastening arrangement; the insert’s cylindrical hole and ISO designation should be verified against the holder specifications. Is this an original Tungaloy product and how is it identified? The insert is an original Tungaloy product identified as WNMG080404-HRM AH8005 with manufacturer article number 6741701 and SKU 6741701-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8005 carbide grade and the HRF chipbreaker to achieve stable, wear-resistant turning of heat-resistant alloys and hard materials; availability and technical advice are provided by Metav Werkzeuge — contact our consultants for holder compatibility and rapid supply. WNMG 080404 AH8005 – Turning insert (ISO), PVD-coated carbide, HRF chipbreaker by Tungaloy WNMG080404-HRF AH8005 is an ISO-format trigon turning insert designed for stable external and internal turning of demanding materials where wear resistance and consistent chip control are required PVD-coated carbide AH8005 for wear resistance HRF chipbreaker for reliable chip control 80° trigon geometry, 0.4 mm corner radius 4.76 mm thickness with cylindrical centre hole Longer tool life through wear-resistant PVD coating The combination of a PVD-coated surface and a wear-focused carbide grade (AH8005) delivers measurable improvements in tool life when machining heat-resistant alloys and hard materials. PVD (physical vapour deposition) forms a thin, adherent hard layer that reduces flank and crater wear, so cutting intervals are longer and component tolerances remain stable. For production environments this translates into reduced index changes and lower process downtime, while the inherent toughness of the substrate maintains edge security under interrupted cuts. Predictable machining and improved chip control The HRF chipbreaker is tuned for turning operations that demand consistent chip formation; it helps break chips into manageable segments and reduces the risk of entanglement on long or deep cuts. The trigon plate form with an 80° included angle provides a robust cutting nose for heavier cuts, while the 0.4 mm corner radius balances edge strength with acceptable surface finish. Because insert compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness, the ISO system design ensures predictable performance when paired with a matching external holder or boring bar. Simple integration into ISO tool systems for reliable production This ISO-format insert has a cylindrical centre hole and a plate thickness of 4.76 mm, allowing secure mounting with standard clamping sets and replacement screws. The ISO designation supports rapid selection of a suitable holder and backing plate, and the insert is intended to be used as part of a system comprising the insert, an appropriate external holder or boring bar, a pad/clamping kit and replacement screws. Clear specification of these parameters reduces setup time and increases process repeatability on the shop floor. For tailored advice on selecting the right holder and to check stock for the Tungaloy WNMG 080404 AH8005, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, application-oriented support Technical data Manufacturer article number: 6741697 SKU: 6741697-Tungaloy Manufacturer SKU: TUN6741697 Article designation: WNMG080404-HRF AH8005 Application: Turning Key dimensions Size: 08 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 0° Centre hole: cylindrical Features and materials Material: cemented carbide Grade/coating: AH8005, PVD-coated Chipbreaker: HRF Plate form: trigon Mounting: with cylindrical centre hole Series: ISO turning indexable inserts Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The Tungaloy WNMG 080404 AH8005 insert is designed for heat-resistant alloys and harder materials; the AH8005 grade and PVD-coated surface offer improved wear resistance for such applications. How does the HRF chipbreaker affect machining? The HRF chipbreaker on this trigon insert promotes short, controllable chips and reduces chip-related interruptions, improving process stability during turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation of the WNMG080404-HRF facilitates selection of suitable external holders or boring bars. What are the key dimensions to check when replacing an insert? Verify the plate size (08), thickness (4.76 mm), corner radius (0.4 mm), included angle (80°) and the presence of the cylindrical centre hole to ensure correct fit and clamping. Is the insert intended for internal as well as external turning? Yes, the ISO trigon format and robust grade make the insert suitable for both external and internal turning when the correct holder and clamping are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
High-performance turning is achieved through the combination of the PVD-coated carbide grade AH8015 and the ISO WNMG 080404 geometry, delivering a robust cutting edge and balanced wear resistance for stable production; order the WNMG 080404 AH8015 indexable insert directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. WNMG 080404 AH8015 — ISO turning indexable insert for general turning, Tungaloy A WNMG080404 AH8015 indexable insert designed for ISO turning applications, optimised for the general machining of heat-resistant alloys and balanced tool life. ISO WNMG 080404 trigon geometry PVD-coated carbide grade AH8015 Balanced wear resistance and edge stability Double-sided chipbreaker, cylindrical hole Reliable performance for demanding turning tasks The AH8015 grade is a PVD-coated carbide designed to combine wear resistance with a stable cutting edge, which supports reproducible results in series production. The insert’s trigon form and double-sided layout extend usable life per plate, while the 0.4 mm corner radius gives a predictable cutting profile for external and internal turning. For process planners, the geometry and coating reduce the need for frequent insert changes, enhancing uptime and improving overall machining efficiency. Secure clamping and ISO compatibility for consistent set-up Compatibility to the toolholder is determined by form, clearance angle, tolerance class, fixing, size and thickness; the insert is supplied with a cylindrical hole for positive clamping in standard WNMG pockets. The ISO WNMG 080404 designation ensures interchangeability across compliant holders, while the 4.76 mm plate thickness and 0° clearance maintain rigidity under moderate to heavy cut conditions. These characteristics translate into consistent runout control and repeatable positioning in automated setups. Application advantage: machining heat‑resistant alloys Selected as a first choice for the general machining of heat‑resistant alloys, the grade offers a balanced compromise between hardness and toughness. The double-sided chipbreaker helps control chip form in mixed cutting conditions, lowering the risk of built-up edge and protecting the cutting edge integrity. Using this insert in turning operations supports improved surface finish and process stability when handling alloys that tend to work-harden or generate elevated cutting temperatures. Practical considerations for production planning The insert’s combination of PVD coating, trigon geometry and AH8015 composition supports a wide coverage of materials when combined with the correct chipbreaker and cutting data. Stock management benefits from the double-sided design, as each plate offers two usable cutting edges, and the cylindrical hole simplifies rotation and indexing. For toolroom engineers, the clear ISO designation reduces setup errors and aids straightforward tool inventory classification. For production teams seeking reliable inserts for turning applications, contact Metav Werkzeuge for availability and tailored machining advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the WNMG 080404 AH8015 and suitable holder combinations. Technical data Article number: 6966375 Manufacturer SKU: TUN6966375 Model series: ISO-Drehwendeschneidplatten Designation: WNMG080404 AH8015 Tungaloy‑insert Core data Geometry size: 08 Corner radius: 0.4 mm Angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Hole: with cylindrical hole Special features Material: carbide Coating: PVD-coated Grade: AH8015 Plate form: trigon Chipbreaker: double-sided Typical use: external and internal turning System components: ISO insert, matching outer holder or boring bar, shim/clamp set, replacement screw FAQ What materials is this insert suitable for? The WNMG 080404 AH8015 insert is intended primarily for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the insert secure to the holder? Clamping is via a cylindrical hole and standard WNMG pockets; the ISO WNMG 080404 geometry ensures correct fitment with compatible holders and clamping sets. How large is the corner radius and what does it affect? The corner radius is 0.4 mm, which influences the strength of the cutting edge and the resultant surface finish; it is a compromise between robustness and finish quality. Is the coating specified and why is it important? The plate is PVD-coated, providing a coating layer that enhances wear resistance and thermal stability, which helps extend tool life under elevated cutting temperatures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
Efficient balance of PVD-coated AH8015 grade and a robust 0.4 mm corner radius delivers stable cutting on heat‑resistant alloys; the ISO WNMG080404 geometry ensures straightforward integration into ISO holders. Order inserts via Metav Werkzeuge or consult the technical team for tailored cutting data. WNMG 080404 AH8015 – ISO turning insert for general turning by Tungaloy A WNMG080404-PS AH8015 ISO‑standard turning insert designed for external and internal turning of heat‑resistant alloys, combining a PVD‑coated cemented carbide grade with a trigon form for reliable chip control. ISO geometry WNMG 080404 PVD‑coated cemented carbide AH8015 0° clearance angle for robust cutting Trigon shape with cylindrical locating hole Predictable performance on heat‑resistant alloys The PVD‑coated AH8015 grade offers a deliberate balance between wear resistance and cutting‑edge stability, making it a practical choice for demanding turning tasks. The PVD coating improves thermal resistance and reduces built‑up edge when machining high‑temperature alloys, while the cemented carbide substrate sustains mechanical load. This combination leads to fewer interruptions in production and more consistent part quality, particularly when shallow to medium depths of cut are required. Secure fit and easy integration into ISO systems Designed to the ISO WNMG geometry, the insert fits standard toolholders when matched for form, size and fastening type. The trigon profile with a cylindrical locating hole provides repeatable positioning, and the specified 0° clearance angle supports robust engagement for conventional turning. Measurable dimensions such as the 08 size and 4.76 mm thickness simplify holder selection and ensure mechanical compatibility across established tool systems, reducing setup time and assembly errors. Improved surface finish and process stability A 0.4 mm corner radius offers a compromise between strength at the cutting edge and the ability to achieve improved surface finishes; the slightly rounded corner distributes cutting forces and lowers the risk of chipping. Combined with the PS chipbreaker, the insert promotes consistent chip control for both external and internal turning operations. Overall tool life benefits from the grade and coating synergy, while stable chip evacuation reduces cycle variability and enhances productivity. Contact Metav Werkzeuge for tailored cutting data, availability and ordering of the Tungaloy WNMG 080404 AH8015 PVD‑coated cemented carbide insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947568 SKU: 6947568-Tungaloy Manufacturer SKU: TUN6947568 Numbers / core technical data Corner radius: 0.4 mm Thickness: 4.76 mm Insert angle: 80° Clearance angle: 0° Size: 08 Special features PVD‑coated cemented carbide AH8015 Chipbreaker PS Trigon insert shape Cylindrical locating hole (with hole) ISO WNMG insert geometry Application: Turning FAQ Which materials are best machined with this grade? The Tungaloy WNMG080404-PS AH8015 insert is optimised for heat‑resistant alloys, providing a balanced combination of wear resistance and edge stability for alloys that demand elevated thermal performance. Is this insert compatible with standard ISO WNMG holders? Yes; the insert follows the ISO WNMG080404 form and is compatible with holders that match the specified geometry, thickness and fastening design, ensuring reliable clamping and repeatable positioning. What does the PS chipbreaker provide in practice? The PS chipbreaker on the WNMG080404-PS supports controlled chip formation and evacuation, which helps maintain surface quality and reduces the risk of chip entanglement during continuous turning. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and promotes a smoother surface finish on finished parts, while also offering improved resistance to chipping under moderate cutting forces. Can the insert be used for both external and internal turning? Yes; the WNMG080404-PS AH8015 is suitable for both external and internal turning when paired with an appropriate external holder or boring bar and when machining parameters are adjusted to the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated carbide AH8015 and a dedicated TF chipbreaker for reliable performance in turning heat-resistant alloys; order directly via Metav Werkzeuge or consult the team for compatibility advice with existing holders. WNMG080404-TF AH8015 ISO turning insert — PVD-coated carbide, TF chipbreaker by Tungaloy A WNMG080404-TF AH8015 insert engineered for ISO-compliant external and internal turning of heat‑resistant alloys and general-purpose applications. ISO WNMG trigon insert for versatile turning PVD-coated carbide AH8015 for heat alloys TF chipbreaker for controlled chip formation 0.4 mm corner radius; 4.76 mm plate thickness Productivity through a high-performance PVD grade The PVD-coated AH8015 grade offers a balanced mix of wear resistance and cutting-edge stability, making it well suited for the machining of heat‑resistant alloys and mixed batches. The PVD layer reduces flank wear and increases thermal resistance during sustained cuts, which contributes to longer tool life and fewer index changes. This results in measurable gains in process uptime and reduced tooling costs per component when compared with uncoated grades. Controlled chips and consistent surface finish The TF chipbreaker geometry promotes predictable chip formation and evacuation, reducing the risk of entanglement and protecting the workpiece surface. The modest 0.4 mm corner radius supports a compromise between edge strength and surface quality: it reinforces the cutting edge during heavier passes while still enabling fine surface finishes on the last passes. For operators assessing cutting strategies, the chip control and radius selection directly influence cycle times and post‑process handling. Straightforward integration into ISO tool systems Compatibility with toolholders is governed by form, relief angle (0°), tolerance class, fastening style, size and thickness. The insert’s trigon shape and cylindrical hole ensure secure clamping in standard ISO WNMG pockets; the 4.76 mm plate thickness contributes to rigidity in both external and internal holders. A well-matched holder and correct clamping torque guarantee repeatable positioning and cutting performance across batches, simplifying setup and reducing scrap rates. Practical choice for mixed production and predictable costs As a versatile indexable option, this insert supports both roughing and finishing operations when the correct feed and depth of cut are chosen. The combination of a robust carbide substrate and a PVD coating means fewer edge failures under interrupted cuts and a stable process window across varying steels and heat‑resistant materials. For operations seeking dependable performance without over‑specialisation, the grade presents a cost‑effective route to consistent productivity. For availability and precise holder compatibility with the Tungaloy WNMG080404-TF AH8015 insert, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947506 Manufacturer SKU: TUN6947506 SKU: 6947506-Tungaloy Label: WNMG080404-TF AH8015 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Insert size: 08 ISO code: 080404 Angle: 80° Relief angle: 0° Special features PVD-coated carbide AH8015 TF chipbreaker geometry Trigon (triangle) plate form Cylindrical hole for secure clamping Intended application: turning Material: carbide FAQ What materials is this insert suitable for? This WNMG080404-TF AH8015 insert is intended primarily for heat‑resistant alloys and general turning tasks; the PVD-coated carbide composition provides a balanced performance across demanding materials. How does the TF chipbreaker affect machining? The TF chipbreaker on the WNMG080404-TF promotes controlled chip formation and reliable evacuation, improving process stability and surface quality during turning operations. Which holder features must match the insert? Holder compatibility depends on form, relief angle (0°), tolerance class, fastening method, size (08) and thickness (4.76 mm); proper holder selection ensures repeatable clamping and cutting precision for the WNMG080404-TF AH8015. Can this insert be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning when paired with an appropriate external holder or boring bar and correct clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
The combination of PVD‑coated carbide AH8015 and ISO compatibility delivers consistent cutting performance and extended tool life in turning applications; the 0.4 mm corner radius and 80° geometry ensure reliable surface quality and secure clamping. Order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. WNMG 080404 AH8015 ISO turning insert WNMG 080404 for Drehen by Tungaloy A WNMG080404‑ZM AH8015 insert designed for ISO‑standard external and internal turning, optimised for heat‑resistant alloys and general turning operations. ISO‑standard trigon insert, size 08 PVD‑coated carbide AH8015 for heat‑resistant alloys 0.4 mm corner radius for versatile finishes Cylindrical hole and 80° geometry for secure clamping Consistent cutting performance with PVD‑coated carbide The PVD‑coated carbide AH8015 grade offers a balanced mix of wear resistance and cutting‑edge stability, making it a dependable choice for machining heat‑resistant alloys. This combination reduces flank and crater wear under higher temperatures, which translates into longer insert life and fewer tool changes. For production environments this means improved process stability and predictable machining windows, supporting efficient cycle times without sacrificing surface quality. ISO compatibility reduces setup risk and simplifies inventory Supplied in the ISO‑standard WNMG format, the insert follows established dimensional and tolerance rules so that holder compatibility is determined by form, clearance angle, tolerance class, fixation and thickness. Using standardised inserts minimises setup errors and simplifies tooling logistics on the shop floor. The result is easier changeovers, faster machine availability and reduced risk of incompatible combinations that could cause poor machining results. Geometry engineered for precision and secure clamping The trigon form with an 0.4 mm corner radius provides a practical balance between strength and finish quality, delivering controlled cutting contact and consistent surface results. With 0° clearance, an 80° angle and a cylindrical hole, the insert offers secure clamping behaviour that limits vibration and chatter during turning. Stable clamping improves repeatability and yields better concentricity on turned parts, particularly for medium‑ and light‑duty finishing passes. Practical advantages for production and process reliability Designed for general turning (Drehen), the insert supports a wide range of applications where a robust, economical cutting solution is required. The PVD layer combined with a engineered carbide substrate contributes to predictable tool life and cost‑effective batch processing. Backed by Tungaloy manufacturing know‑how, the grade aims to deliver productive machining with consistent results, helping to keep throughput steady while maintaining component quality. For machining advice tailored to the Tungaloy WNMG080404‑ZM AH8015 insert and to discuss optimal holder combinations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical Data Article number: 6951071 SKU: 6951071-Tungaloy Manufacturer SKU: TUN6951071 Model series: ISO-Drehwendeschneidplatten Designation: WNMG080404-ZM AH8015 Facts Corner radius: 0.4 mm Thickness: 4.76 mm Size: 08 ISO code: 080404 Geometry angle: 80° Clearance: 0° Hole: with cylindrical hole Special features Material: Carbide Coating: PVD Grade: AH8015 Shape: Trigon Insert type: ISO turning insert Application: Turning (Drehen) Chipbreaker: ZM Mounting: compatible with ISO holders, determined by form and tolerance FAQ What materials is this insert best suited for? The WNMG080404‑ZM AH8015 insert is primarily specified for heat‑resistant alloys and general steel turning; the PVD‑coated AH8015 grade balances wear resistance and edge stability for these materials. Is the insert compatible with standard ISO holders? Yes. The insert conforms to ISO dimensions and mounting conventions, so compatibility with a holder depends on matching form, clearance angle, tolerance class, fixation, size and thickness. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius provides a compromise between strength and surface quality—offering smoother finishes than a larger radius while maintaining adequate edge robustness for consistent results. What does the ZM chipbreaker mean for chip control? The ZM chipbreaker is designed to control chips according to workpiece material and cutting conditions; selecting the correct chipbreaker helps maintain efficient chip evacuation and protects the cutting edge. Can this insert be used for internal turning as well as external turning? Yes. The trigon geometry and ISO form allow use in both external and internal turning operations, provided a suitable holder is selected that accommodates the insert dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
WNMG080404-TSF AH8015 ISO-Drehwendeschneidplatte für Drehen – Tungaloy Die WNMG080404-TSF AH8015 ist eine ISO-genormte Drehwendeschneidplatte, die für das Außen- und Innendrehen hitzebeständiger Legierungen entwickelt wurde. ISO-genormt für einfache Halterkompatibilität PVD-beschichtetes Hartmetall für hohe Standzeit Trigon-Form mit zylindrischem Loch für sichere Fixierung TSF-Spanbrecher für planbare Spanbildung Wirtschaftliche Standzeit durch Beschichtung und Schneidstoff Die Kombination aus PVD-Beschichtung und Hartmetall sorgt für eine ausgewogene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität. Die Sorte AH8015 ist speziell als erste Wahl für die Bearbeitung hitzebeständiger Legierungen konzipiert, wodurch sich die Standzeit im Vergleich zu unbeschichteten Platten deutlich verbessert. Für Anwender bedeutet das weniger Werkzeugwechsel, höhere Maschinenverfügbarkeit und eine messbare Senkung der Fertigungskosten. Präzise Ergebnisse beim Außen- und Innendrehen Mit einem Eckenradius von 0,4 mm und einem Freigewinkel von 0° liefert die Wendeplatte saubere Übergänge und stabile Schnittbedingungen, besonders bei geforderten Oberflächengüten. Die Trigon-Form unterstützt die Steifigkeit in der Einspannung, was zu konstanteren Schnitten und reproduzierbaren Ergebnissen führt. Anwender profitieren von weniger Ausschuss und gleichbleibender Bauteilqualität. Kompatibilität und einfache Handhabung im Prozess Die Kompatibilität zur Werkzeugaufnahme ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die WNMG-Platte mit zylindrischem Loch lässt sich sicher mit gängigen Außenhaltern und Bohrstangen kombinieren; Unterlagen, Klemmsätze und Ersatzschrauben komplettieren den Systemaufbau. Dadurch reduziert sich die Rüstzeit, und die Integration in bestehende Fertigungszellen verläuft reibungslos. Spezifische Vorteile durch Spanformer und Plattengeometrie Der TSF-Spanbrecher wurde für eine kontrollierte Spanbildung ausgelegt und verbessert die Spanabfuhr bei hitzebeständigen Legierungen. Durch die präzise Formgebung der Schneidkante entstehen gleichmäßige Späne, die die Bearbeitung sicherer und planbarer machen. Daraus resultiert eine effizientere Zerspanung mit konstanter Prozessstabilität. Für wen sich die Platte eignet Konstrukteure, Fertigungsleiter und Zerspaner, die produktive Prozesse mit hoher Wiederholgenauigkeit benötigen, finden in dieser Wendeplatte eine wirtschaftliche Lösung. Entwickelt für den Einsatz in anspruchsvollen Umgebungen, ist die Platte besonders geeignet für Betriebe, die hitzebeständige Legierungen in Serie bearbeiten und dabei Wert auf lange Standzeiten und konstante Qualität legen. Empfehlung: Die WNMG080404-TSF AH8015 von Tungaloy als PVD-beschichtete Hartmetalllösung direkt bei Metav Werkzeuge anfragen – bei Fragen: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: 6793738 Bezeichnung: WNMG080404-TSF AH8015 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: TUN6793738 Fakten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (PVD: physikalische Dampfabscheidung, Verschleißschutz) Sorte: AH8015 Spanbrecher: TSF (TSF: feine Spanformung, kontrollierte Spanabfuhr) Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Einsatz: Drehen Einsatzbeschreibung: Erste Wahl für die allgemeine Bearbeitung hitzebeständiger Legierungen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der WNMG080404-TSF AH8015 bearbeiten? Die WNMG080404-TSF AH8015 von Tungaloy ist für hitzebeständige Legierungen optimiert; sie eignet sich ebenso für viele Stahl- und Sonderwerkstoff-Anwendungen, abhängig von Schnittwerten und Halterstabilität. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die ISO-genormte Wendeplatte kann sowohl beim Außen- als auch beim Innendrehen eingesetzt werden; die Trigon-Form erhöht dabei die Einspannstabilität. Welche Vorteile bietet die PVD-Beschichtung bei dieser Platte? Die PVD-Beschichtung der WNMG080404-TSF AH8015 reduziert den Verschleiß, verbessert die Wärmeresistenz und trägt zu längeren Standzeiten und konstanteren Bearbeitungsergebnissen bei. Wie wichtig ist die Halterkompatibilität und worauf ist zu achten? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Für sichere Ergebnisse sollten Halter gewählt werden, die diese Parameter exakt unterstützen. Für welche Schnittaufgaben eignet sich der Eckenradius 0,4 mm? Der Eckenradius von 0,4 mm eignet sich besonders für universelle Anwendungen mit gutem Kompromiss aus Schnittstabilität und Oberflächenqualität; er ist ein bewährter Standard für allgemeine Zerspanungsaufgaben. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD-coated carbide in grade AH8015, a stable HRF chipbreaker and ISO conformity to improve throughput and tool life; order directly via Metav Werkzeuge or request advice from our consultants. WNMG 080404 AH8015 ISO turning insert for Drehen – Tungaloy, PVD-coated carbide, HRF chipbreaker The WNMG 080404 AH8015 is an ISO-standard indexable turning insert intended for general-purpose external and internal turning of heat-resistant alloys. PVD-coated carbide grade AH8015 HRF chipbreaker for stable chip control Trigon shape, 0.4 mm corner radius 0° relief angle and cylindrical hole Consistent performance for heat-resistant alloys The insert combines a PVD-coated surface with a carbide substrate to deliver a balance between wear resistance and cutting-edge stability. This composition makes it a reliable choice for machining heat-resistant alloys, where tool life and consistent dimensional results matter. The AH8015 grade is optimised to resist abrasive wear while maintaining a robust cutting edge, so the result is fewer tool changes and steadier cycle times. The HRF chipbreaker aids controlled chip formation, reducing interruptions and protecting the workpiece finish. Secure fit and predictable compatibility Compatibility with the toolholder is determined by a set of measurable parameters: ISO form, relief angle, tolerance class, attachment method, size and thickness. The insert’s trigon form and the presence of a cylindrical hole ensure reliable seating and repeatable clamping when matched to an appropriate external holder or boring bar. Choosing the correct holder that accepts the 08 size and the specified 4.76 mm plate thickness simplifies setup and minimises vibration, which in turn improves surface quality and tool lifetime. Practical benefits from geometry and grade A 0.4 mm corner radius offers a pragmatic compromise between edge strength and the ability to deliver an acceptable surface finish on varied workpiece geometries. The effective 0° relief supports positive cutting action suitable for general turning operations and helps maintain stability under interrupted cuts. These geometric choices mean fewer rejects, predictable tool change intervals and improved process reliability — translating directly to lower overall production costs and better throughput. Selection and process guidance When integrating the insert into a production process, pair the PVD-coated AH8015 grade with cutting parameters suited to heat-resistant alloy machining: moderate depths of cut and speeds that favour edge life over raw material removal. The HRF chipbreaker should be selected where short, controlable chips are required to avoid entanglement in automatic machines. For bespoke recommendations or to verify holder compatibility, consult technical data sheets or contact the supplier to confirm tolerance classes and clamping details. For precision turning solutions with Tungaloy’s AH8015 grade, contact Metav Werkzeuge for ordering and tailored technical support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741698 Manufacturer SKU: TUN6741698 SKU: 6741698-Tungaloy ISO designation: WNMG080404-HRF Model series: ISO turning inserts Facts Material: carbide Grade/coating: AH8015, PVD-coated Size: 08 Plate thickness: 4.76 mm Corner radius: 0.4 mm Special features Chipbreaker: HRF Shape: trigon Relief angle: 0° Hole: with cylindrical hole Angle: 80° Application: Turning FAQ What materials is this insert best suited for? The WNMG 080404 AH8015 insert is designed primarily for machining heat-resistant alloys; the AH8015 PVD-coated carbide grade balances wear resistance and edge stability for such materials. How does the HRF chipbreaker affect chip control? The HRF chipbreaker on the WNMG080404-HRF helps form short, controllable chips, improving operational safety and reducing the need for chip handling during continuous turning work. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness; match a holder that accepts 08 size, trigon geometry and 4.76 mm plate thickness for reliable clamping. Is the insert suitable for interrupted cuts? Yes, the combination of AH8015 grade and a 0.4 mm corner radius provides edge strength that copes well with light to moderate interruptions in turning operations. What is the benefit of the PVD coating on this turning insert? The PVD-coated surface increases wear resistance at elevated temperatures and supports longer tool life under the thermal loads typical of heat-resistant alloy machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015, ISO conformity and a stable cutting edge to ensure reliable external and internal turning of heat-resistant alloys; order the WNMG080404-ZF AH8015 directly via Metav Werkzeuge or consult the team for holder compatibility. WNMG080404-ZF AH8015 — ISO turning insert, PVD-coated carbide (Tungaloy) The WNMG080404-ZF AH8015 is a trigon ISO-standard turning insert designed for external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and edge stability. PVD-coated carbide grade AH8015 Trigon form WNMG, 80° cutting angle 0.4 mm corner radius for versatile turning Cylindrical hole, 4.76 mm plate thickness Reliable performance on heat-resistant alloys with balanced wear resistance The combination of PVD-coated surface and carbide substrate in grade AH8015 provides a well‑balanced resistance to abrasive wear while maintaining a robust cutting edge. This balance reduces the risk of premature chipping during interrupted cuts and increases tool life in the machining of higher-temperature alloys. The PVD-coated layer offers improved hardness and heat protection compared with uncoated grades, which translates into consistent component quality and fewer insert changes during a shift. Clear guidance on dimensional compatibility and system fit As an ISO-standard trigon insert, the geometry and dimensions follow industry norms, but correct fit depends on several factors: form, clearance angle, tolerance class, fastening method, size and thickness. The 80° cutting angle and 0.4 mm corner radius help define both the cutting forces and achievable surface finish; the plate’s 0° clearance angle must be matched to an appropriate holder or boring bar. The insert’s cylindrical hole and 4.76 mm plate thickness are additional mounting criteria. This information simplifies holder selection and avoids trial-and-error, ensuring secure clamping and repeatable results on the machine. Improved chip control and practical advantages on the shop floor The ZF chipbreaker is optimised for controlled segmentation when machining stainless and heat-resistant materials, reducing the likelihood of long, uncontrolled chips and contributing to safer, uninterrupted production. The trigon shape (WNMG) with its robust cutting edge and the 0.4 mm corner radius offers a compromise between edge strength and dimensional fidelity, suitable for finishing and light to medium roughing tasks. For workshop planning, the insert’s combination of geometry, coating and grade supports steady productivity, fewer changeovers and predictable tool costs over production runs. For tailored advice on using the Tungaloy WNMG080404-ZF AH8015 in a specific holder or application, or to confirm compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for practical support and availability. Technical Data Article number: 6947530 Manufacturer article number: 6947530 Manufacturer SKU: TUN6947530 SKU: 6947530-Tungaloy Label: WNMG080404-ZF AH8015 Facts Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 80° Plate thickness: 4.76 mm Plate size: 08 Special features Grade/coating: AH8015, PVD-coated carbide Plate form: trigon (WNMG) Chipbreaker: ZF Hole: cylindrical hole Typical application: external and internal turning FAQ What materials is this insert best suited for? The Tungaloy WNMG080404-ZF AH8015 is designed as a first choice for general machining of heat-resistant alloys, offering a balance of wear resistance and edge stability suitable for those materials. How does the ZF chipbreaker influence machining? The ZF chipbreaker on the WNMG080404-ZF AH8015 promotes controlled chip formation during turning, improving process security and reducing risk of chip entanglement in demanding alloys. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; verify these parameters against the insert’s trigon form, 0° clearance angle and 4.76 mm thickness before selection. Is the AH8015 grade suitable for interrupted cuts? Yes, the AH8015 grade combines edge stability and wear resistance, making the insert resilient under interrupted cutting conditions often encountered in workshop production. What benefits does the PVD coating provide? The PVD-coated layer increases surface hardness and heat resistance, which helps to extend tool life and maintain consistent surface finish when machining heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of cost-effective productivity, balanced wear resistance and straightforward ISO compatibility for reliable turning operations; order matching inserts and accessories directly via Metav Werkzeuge or consult our technical advisors for holder compatibility. WNMG 080404 AH8015 indexable turning insert for Turning – Tungaloy, PVD-coated carbide, trigon 80° with cylindrical hole WNMG080404-TM AH8015 is an ISO-standard indexable turning insert designed for general turning of heat-resistant alloys; trigon geometry and a TM chipbreaker provide stable cutting and controlled chip flow PVD-coated carbide grade AH8015 Trigon 80° geometry with cylindrical hole 0.4 mm nose radius for fine finishing ISO compatibility for standard turning systems High productivity for demanding turning tasks The combination of a PVD-coated carbide substrate and the AH8015 grade delivers a pragmatic balance between wear resistance and edge stability, making this insert well suited to the general machining of heat‑resistant alloys. The coating reduces built-up edge and improves flank wear behaviour, which in turn supports longer tool life and fewer indexings. For production environments this means fewer interruptions and a more predictable tool-change schedule, offering measurable gains in machining uptime and process reliability. Precise fit and predictable performance in ISO systems Manufactured to ISO dimensions, the trigon-shaped insert with an 80° main angle and a cylindrical locating hole ensures consistent seating and repeatable clamping in compatible holders. The 0° clearance angle and the specified thickness of 4.76 mm contribute to a stable cutting geometry under varying radial and axial loads. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; matching the indexable insert to the correct external holder and clamping set is decisive for achieving the expected cutting performance. Controlled chip formation and surface quality The integrated TM chipbreaker is tuned to the AH8015 grade and is effective at controlling chip shape during both external and internal turning operations. With a 0.4 mm nose radius, the insert enables fine finishing while maintaining acceptable edge strength for light to moderate turning passes. The result is improved surface finish and reduced risk of unpredictable chip behaviour, which benefits downstream processes and reduces rework. The insert’s robust substrate and coating combination supports stable cutting even when machining demanding alloys. Contact Metav Werkzeuge for tailored recommendations on holder compatibility, to request sample inserts, or to arrange technical consultation by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6760671 Manufacturer SKU: TUN6760671 SKU: 6760671-Tungaloy Designation: WNMG080404-TM AH8015 Application: Turning Facts Size: 08 Thickness: 4.76 mm Nose radius: 0.4 mm Main angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: TM Plate shape: trigon ISO-standard indexable insert Suitable for external and internal turning FAQ What materials is this insert suitable for? The WNMG080404-TM AH8015 insert is specified for the general machining of heat‑resistant alloys and offers balanced wear resistance and edge stability for a broad material range. How does the TM chipbreaker affect chip control? The TM chipbreaker on the insert promotes predictable chip formation and controlled evacuation, which helps to improve surface finish and reduce the risk of entangling chips during turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; matching those parameters to the WNMG080404-TM AH8015 geometry ensures correct seating and clamping. Can this insert be used for fine finishing? Yes, with a 0.4 mm nose radius and the AH8015 grade, the insert is suitable for fine finishing passes while maintaining adequate edge strength for routine turning. Is the insert supplied with screws or clamping sets? The offered insert is part of an ISO system that typically comprises the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws; consult Metav Werkzeuge for the exact scope when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AH905 Wendeplatten - Tungaloy
Benefit from a combination of sharp cutting performance, reliable PVD protection and ISO compatibility that keeps turning operations productive and repeatable; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. WNMG 080404 AH905 — WNMG080404-HMM indexable turning insert for turning by Tungaloy WNMG080404-HMM AH905 is an ISO-format indexable insert designed for external and internal turning, offering a PVD-coated cemented carbide grade for stable cutting and process security. PVD-coated cemented carbide grade AH905 Trigon shape for secure clamping Corner radius 0.4 mm for fine surface finish Compatible with ISO turning holders Consistent cutting performance with reduced tool change The PVD-coated cemented carbide grade AH905 provides a balance of wear resistance and a sharp cutting edge, suited where process security and edge integrity are required. As an ISO-compliant turning insert, the design promotes predictable behaviour during continuous machining; the PVD coating reduces flank wear while maintaining edge sharpness, which in turn improves tool life and reduces downtime. This rationale supports improved productivity and a lower cost per component when used in standard turning operations. Precision fit and straightforward integration into ISO tool systems Designed as an ISO turning plate, the WNMG080404-HMM ensures compatibility through defined form, relief angle, tolerance class, fastening and thickness, enabling straightforward integration with matched outside holders or boring bars. The trigon shape and cylindrical hole deliver stable clamping and repeatable seating; the 0° relief angle and 80° wedge angle support versatile approaches to external and internal turning. Selection of the appropriate chipbreaker and grade should follow workpiece stability and machining strategy to achieve the desired surface quality and process reliability. Stable chip control and reliable edge life for shop-floor demands The insert’s geometry, including a corner radius of 0.4 mm, and the HMM chipbreaker, are intended to aid controlled chip formation under varying cutting conditions. The result is a reduction in unexpected edge chipping and an improvement in consistent dimensional outcomes across batches. For operations prioritising uninterrupted throughput, this combination of coating, substrate and chip control contributes to reproducible part quality and predictable tool change intervals, supporting long-term process planning and operational efficiency. Contact Metav Werkzeuge for availability and tailored recommendations on the Tungaloy WNMG080404-HMM AH905 turning inserts; our specialists will advise on the best chipbreaker and holder combination for specific turning tasks — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: 6859437 Manufacturer SKU: TUN6859437 SKU: 6859437-Tungaloy Model series: ISO turning indexable inserts Designation: WNMG080404-HMM AH905 Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Insert size: 08 Relief angle: 0° Wedge angle: 80° ISO code: 080404 Special features Material: cemented carbide Coating: PVD Grade: AH905 Chipbreaker: HMM Plate form: trigon Hole: cylindrical hole Application: turning (external and internal) Compatibility: ISO holders and boring bars FAQ What materials and operations is this insert intended for? The WNMG080404-HMM AH905 insert is designed for turning operations, both external and internal; the AH905 grade and HMM chipbreaker are selected to support stable cutting and edge integrity across typical turning tasks. How does the AH905 grade affect tool life and finish? AH905 combines a PVD-protected cemented carbide substrate that balances wear resistance with a sharp cutting edge, improving tool life and delivering a fine surface finish when the correct chipbreaker and cutting parameters are applied. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO geometries and its trigon shape and cylindrical hole permit secure clamping in compatible ISO turning holders and boring bars. What benefits does the HMM chipbreaker provide? The HMM chipbreaker facilitates controlled chip formation during turning, helping to prevent edge chipping and supporting consistent part quality and predictable tool-change intervals. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AT9530 Wendeplatten - Tungaloy
WNMG 080404 AT9530 – WNMG080404-TS Drehwendeschneidplatte von Tungaloy Die WNMG080404-TS AT9530 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen mit Schwerpunkt auf Oberflächengüte und gleichmäßigem Verschleiß ISO-genormt für universelle Einsatzbarkeit Beschichtetes Cermet sorgt für gleichmäßigen Verschleiß Trigon-Form für stabile Auflage und wiederholgenaue Positionierung Eckenradius 0,4 mm für feine Oberflächen Zylindrisches Loch und 4,76 mm Plattendicke für sichere Befestigung Präzision und Oberflächengüte bei Schlichtbearbeitung Die WNMG080404-TS AT9530 wurde speziell für die Schlicht- und Leichtbearbeitung von Stahl entwickelt und bietet durch den beschichteten Cermet eine sehr gleichmäßige Verschleißentwicklung. Das Ergebnis ist eine konstante Oberflächengüte, die Nachbearbeitungsaufwand reduziert und Bauteilqualität sichert. Anwender profitieren von stabilen Schnittbedingungen bei feinen Schnitten, wodurch Taktzeiten in der Fertigung planbarer werden und Ausschussquoten sinken. Einfache Einbindung und werkstatttaugliche Kompatibilität Dank der ISO-Normierung und der trigonalen Plattenform lässt sich die Wendeplatte unkompliziert in gängige Außenhalter und Bohrstangen integrieren. Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke; diese Parameter gewährleisten eine stabile Spannlage und reduzieren Vibrationen. Dadurch wird die Wiederholgenauigkeit erhöht und das Werkzeugverhalten im Prozess vorhersehbar. Materialeigenschaften und Prozessvorteile Der Hartmetall-Werkstoff mit Cermet-Beschichtung verbindet hohe Verschleißfestigkeit mit einer guten Schneidkantenerhaltung; das führt zu längeren Standzeiten bei Schlichtprozessen. Für Anwender bedeutet das weniger Werkzeugwechsel und geringere Stillstandszeiten. Gleichzeitig unterstützt die Sorte AT9530 eine gleichmäßige Spanbildung, was die Spanabfuhr vereinfacht und die Schnittstabilität verbessert. Empfohlene Anwendungen und Zielgruppen Ideal ist die Platte für Fertigungsumgebungen, in denen Außen- und Innendrehen mit Anspruch an feine Oberflächen gefordert werden, etwa in der Feinmechanik oder bei Komponenten im Maschinenbau. Anwender mit Fokus auf Prozessstabilität und Serieneinsatz profitieren besonders, weil die Kombination aus Formstabilität und Sortenwahl reproduzierbare Ergebnisse liefert. Maschinenbediener, Fertigungsplaner und Instandhalter erhalten damit ein präzises und wirtschaftliches Werkzeug für die tägliche Produktion. Empfehlung: Für konstant hohe Oberflächengüte und gleichmäßigen Verschleiß die WNMG080404-TS AT9530 von Tungaloy anfragen; Beratung und Bestellung über Metav Werkzeuge: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6773713 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080404-TS AT9530 Herstellersku: TUN6773713 Fakten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstoff: beschichtetes Cermet Sorte: AT9530 Spanbrecher: TS (Spanbrecher für feine Schnitte und gute Oberflächengüte) Plattenform: Trigon Loch: zylindrisches Loch Einsatz: Drehen Anwendung: Schlicht- und Leichtbearbeitung von Stahl Kompatibilität: abhängig von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke FAQ Für welche Werkstoffklassen ist die Platte geeignet? Die Platte ist optimiert für die Bearbeitung von Stahl im Schlicht- und Leichtschnitt. Die Sorte AT9530 bietet dabei gleichmäßigen Verschleiß und gute Oberflächengüte. Welche Platte passt in vorhandene Halter? Die ISO-Normung und die Angaben zu Form, Freiwinkel, Größe und Dicke sind entscheidend; die WNMG080404-TS AT9530 passt in Halter, die für trigonale Wendeplatten mit 08-Größe und 4,76 mm Dicke ausgelegt sind. Welchen Vorteil bringt der Eckenradius 0,4 mm? Ein Eckenradius von 0,4 mm erzeugt feinere Oberflächen und reduziert Schneidkantenschwingungen bei Schlichtoperationen, was die Bauteilqualität steigert. Ist die Sorte AT9530 für Serienfertigung geeignet? Ja, die AT9530-Sorte ist auf gleichmäßigen Verschleiß und Prozessstabilität ausgelegt, was sie für serielle Anwendungen mit hohem Qualitätsanspruch prädestiniert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080404 AT9530 Wendeplatten - Tungaloy
WNMG 080404 AT9530 ISO-Drehwendeschneidplatte für Drehen von Tungaloy WNMG 080404 AT9530 ist eine ISO-genormte Drehwendeschneidplatte für Schlicht- und Leichtbearbeitung von Stahl mit beschichtetem Cermet. Trigonale Platte, 80° Winkel Beschichtetes Cermet für feine Oberflächen Eckenradius 0,4 mm für präzise Schlichtung 0° Freiwinkel, stabile Schnittkante Zylindrisches Loch für sichere Befestigung Produktive Schlichtbearbeitung für konstante Oberflächenqualität Die WNMG080404-ZF AT9530 bietet durch das beschichtete Cermet und die optimierte Spanform einen gleichmäßigen Verschleiß und hohe Oberflächengüte. Das Resultat ist weniger Nacharbeit und höhere Teileausbeute, was die Produktivität in Serienprozessen verbessert. Der präzise Eckenradius von 0,4 mm unterstützt definierte Schnittkanten bei Schlichtoperationen. Passgenaue Integration in ISO-Systeme reduziert Rüstzeiten Dank ISO-Genormung und klarer Form-, Größen- und Dickenangaben lässt sich die Platte schnell mit passenden Haltern und Klemmsätzen kombinieren. Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt, was die Auswahl vereinfacht und die Rüstzeiten verkürzt. Die trigonale Plattenform ermöglicht drei Schneidkanten pro Platte und erhöht damit die Wirtschaftlichkeit. Materialfokus und Anwendungsempfehlungen für Stahlbearbeitung Der Schneidstofftyp ist beschichtetes Cermet, speziell abgestimmt auf Schlicht- und Leichtbearbeitung von Stahl zur Erzielung feiner Oberflächen. Der Spanbrecher ZF ist als Schlichtspanformer ausgelegt und sorgt für ruhigen Spanfluss bei stabilen Bearbeitungsbedingungen. Für beständige Ergebnisse empfiehlt sich die Anpassung von Spanformer und Sorte an Werkstoff, Bearbeitungsart und Maschinenstabilität. Wirtschaftlichkeit, Verfügbarkeit und technischer Support Die Kombination aus langlebigem Hartmetall, präziser Geometrie und ISO-Kompatibilität macht die Platte zur wirtschaftlichen Wahl für Fertigungen mit hohem Anspruch an Oberflächengüte. Ersatzschneiden sind einfach zu verwalten, und die Wiederholgenauigkeit der Schneidkante reduziert Stillstandszeit. Bei Fragen zu Einbausituation oder Vorschub-/Schnittwerten steht der technische Vertrieb unterstützend zur Seite. Für präzise Schlichtbearbeitung empfehlen wir die WNMG 080404 AT9530 von Tungaloy; bei technischen Fragen oder Bestellwunsch kontaktieren Sie bitte info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6773715 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080404-ZF Daten Winkel: 80° Eckenradius: 0,4 mm Plattengröße: 08 Plattendicke: 4,76 mm Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: AT9530 Spanbrecher: ZF – Schlichtspanformer Plattenform: Trigon Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen ISO-Genormt FAQ Was zeichnet die Schneidstoffsorte AT9530 aus? Die AT9530 ist ein beschichtetes Cermet, das auf Schlicht- und Leichtbearbeitung von Stahl ausgelegt ist und gleichmäßigen Verschleiß sowie gute Oberflächengüte bietet. Für welche Bearbeitungen ist diese Plattentype besonders geeignet? Die Platte eignet sich vor allem für Schlicht- und Leichtdrehoperationen; der Spanbrecher ZF unterstützt ruhigen Spanfluss bei stabilen Bedingungen. Wie beeinflusst der 0° Freiwinkel die Leistung? Ein 0° Freiwinkel sorgt für eine stabile Schneidkante und hohe Kantentragfähigkeit, was bei Schlichtvorgängen zu reproduzierbaren Oberflächen führt. Welche Vorteile hat die trigonale Form? Die trigonale Form bietet drei Schneidkanten pro Platte, wodurch die Standzeit wirtschaftlich genutzt werden kann und Rüstaufwand sinkt. Welche Angaben sind wichtig für die Halterkompatibilität? Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität zu Außenhaltern oder Bohrstangen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) and a precise 0.4 mm corner radius to achieve superior surface finish and consistent tool life in finishing operations; order the inserts directly via Metav Werkzeuge or contact the consultants for process-matching advice. WNMG 080404 AT9530 — WNMG080404-TQ AT9530 indexable turning insert by Tungaloy, coated cermet for fine and light turning WNMG080404-TQ AT9530 is a triangular, ISO-standard indexable insert designed for finishing and light turning of steel, offering a balance of surface quality and even wear Coated cermet grade AT9530 Trigon form for stable clamping 0.4 mm corner radius for fine finishes Cylindrical central hole for secure fastening Optimised finishing performance with coated cermet The WNMG080404-TQ insert combines a coated cermet cutting material with a geometry focused on finishing and light machining of steel. Cermet grades deliver a fine-grained cutting edge that is conducive to excellent surface finish and reduced built-up edge; the AT9530 composition promotes uniform wear, which helps maintain consistent part quality over longer tool life. For production environments where dimensional tolerances and surface appearance matter, this insert reduces the need for rework while keeping machining stable under finishing conditions. ISO compatibility and secure system integration Designed as an ISO-standard turning insert, compatibility with the toolholder is determined by the insert’s shape, clearance angle, tolerance class, attachment method, size and thickness. The trigon form and defined dimensions allow straightforward pairing with standard WNMG holders and boring bars. Because the interface geometry is standardised, the insert can be integrated into existing tool systems with predictable clamping behaviour and repeatability, making tool changeovers and inventory management more efficient. Controlled chip formation and geometry benefits The TQ chipbreaker integrated into the insert’s face is optimised for fine and light turning, providing reliable chip control at finishing feeds. The trigon geometry together with a 0.4 mm corner radius produces small, manageable chips and reduces vibration potential, which supports surface integrity. A 0° clearance angle is specified for this variant, enabling the intended contact conditions at the cutting edge while the cylindrical central hole ensures secure fastening and consistent seat support in the holder, which is critical for repeatable results. Material, application range and process recommendations Constructed from cemented carbide, the insert is coated and supplied in the AT9530 grade, making it particularly suited to finishing and light machining of steel. Selection of the proper chipbreaker and grade is recommended according to workpiece material and machining stability: the AT9530 should be chosen where a fine surface and regular wear pattern are priorities. For mixed-production shops, keeping a small range of complementary chipbreakers and grades helps to match the insert to varying cut depths and stability conditions, thereby improving overall productivity and component quality. For process selection or to request matching holder recommendations for the Tungaloy WNMG080404-TQ AT9530 coated cermet insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical advisor Technical data Article number: 6773717 Manufacturer SKU: TUN6773717 SKU: 6773717-Tungaloy Model series: ISO turning indexable inserts Facts ISO code: 080404 Corner radius: 0.4 mm Included hole: with hole (cylindrical) Thickness: 4.76 mm Shape size: 08 Clearance angle: 0° Insert angle: 80° Special features Coating / grade: AT9530 Cutting material: coated cermet Chipbreaker: TQ Plate form: trigon (triangular) Application: turning Material suitability: steel Use case: finishing and light machining FAQ What applications is this insert intended for? The WNMG080404-TQ AT9530 insert is intended for fine and light turning operations on steel where surface finish and regular wear behaviour are required. Which chip control does this insert provide? This variant features a TQ chipbreaker designed to produce short, controlled chips in finishing cuts while supporting consistent surface integrity. Is the insert compatible with standard WNMG holders? Yes, the insert follows ISO geometry (080404) so compatibility with matching WNMG holders is determined by form, size, thickness and attachment specifications. What material is the cutting part made of? The cutting part is a coated cermet, supplied in the AT9530 grade for improved surface finish and uniform wear in finishing applications. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a balance between edge strength and the ability to achieve fine surface finishes, making it suitable for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade for superior surface finish and a trigon WNMG geometry for stable edge support to achieve consistent, high-quality turning results. Order directly via Metav Werkzeuge or consult our specialists for selection and batch supply. WNMG 080404 AT9530 — ISO turning insert WNMG080404-TSF for Turning | Tungaloy The WNMG080404-TSF AT9530 is an ISO-standard trigon indexable insert designed for external and internal turning, optimised for fine finishing of steel components. Cermet coating AT9530 for fine finishing Trigon form WNMG for robust edge support 0.4 mm corner radius for controlled chamfers ISO 080404 standardised fit for wide compatibility Consistent finish and predictable tool life for finishing The coated cermet grade AT9530 provides a balance between hardness and toughness that is tailored for light and finishing cuts in steel, delivering a superior surface finish and uniform wear over runs. Cermet materials combine ceramic hardness with metallic toughness; the coating further improves resistance to abrasion and built-up edge. For production environments where repeatable part quality matters, this insert reduces the need for rework and keeps dimensional tolerances stable across batches. Precise fit and repeatability reduce setup time Being an ISO-standard insert, the geometry and mounting datum are consistent across compliant holders, so compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. That standardisation simplifies tool changeovers and ensures repeatable clamping accuracy. The specification with a cylindrical locating hole supports secure fastening and consistent tool projection, which together support reliability and shorter machine downtime. Design features that enhance process stability and chip control The trigon form and 0.4 mm corner radius provide a robust cutting edge for finishing operations while limiting the risk of edge chipping during interrupted cuts. The TSF chipbreaker is optimised for light cuts and fine turning, producing manageable chips and good surface integrity. The plate thickness of 4.76 mm and a flat 0° clearance angle are design choices that prioritise edge support and contact stability; in suitable holders these characteristics contribute to steadier machining and reduced vibration for better surface results. Practical application and support for production decisions This insert suits finishing and light turning of steel when the priority is surface quality and consistent insert life. The combination of geometry, chip control and Tungaloy production standards makes it especially useful in industries where cosmetic and dimensional quality are essential, such as automotive and precision components. For operators less familiar with cermet behaviour, selecting the right chipbreaker and cut parameters ensures the best performance and can be discussed with our technical advisors for process alignment. For finishing-focused turning projects, ask Metav Werkzeuge about batch availability and process optimisation for the Tungaloy WNMG080404-TSF AT9530 — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange a consultation or order processing. Technical Data Article number: 6773711 SKU: 6773711-Tungaloy Label: WNMG080404-TSF AT9530 Model series: ISO-Drehwendeschneidplatten Core specifications Size designation: 08 ISO code: 080404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Included hole: with hole (cylindrical) Included angle: 80° Clearance angle: 0° Materials & features Cutting material: coated cermet (AT9530) Chipbreaker: TSF Plate form: trigon Application: turning (external and internal) Compatibility: ISO-standard indexable insert system FAQ What materials is this insert intended for? The WNMG080404-TSF AT9530 is specified for finishing and light turning of steel; the coated cermet AT9530 emphasises surface quality and even wear during machining. Which machine holders fit this insert? Holders that accept ISO WNMG inserts with an 080404 designation and a cylindrical locating hole are compatible; mechanical fit depends on form, fastening method and tolerance class as specified for ISO turning systems. How does the TSF chipbreaker affect chip formation? The TSF chipbreaker is designed for light cuts and finishing: it promotes short, controllable chips and supports a smooth surface finish when used with appropriate feed and speed settings. What edge preparation does the 0.4 mm radius provide? A 0.4 mm corner radius balances edge robustness with the ability to produce fine surface profiles; it helps prevent premature edge chipping while maintaining good dimensional control. Is this an original Tungaloy product and what is the SKU? Yes, this is an original Tungaloy insert (WNMG080404-TSF AT9530) supplied under SKU 6773711-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com