CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of a dedicated finishing solution that combines the sharp cutting edge of an uncoated cermet NS9530 with ISO conformity for predictable results; order via Metav Werkzeuge or consult their specialists for application-tailored advice. CNMG 120404 NS9530 Turning Insert (Finishing) — Tungaloy A CNMG 120404 NS9530 Tungaloy turning insert designed for precision finishing of steel, offering a sharp edge and low cutting forces for superior surface quality Uncoated cermet NS9530 for finishing Sharp edge with low cutting forces ISO CNMG120404 rhombic 80° form Compatible with cylindrical-hole clamping Consistent finishing with a low-force cutting geometry The NS9530 grade is an uncoated cermet developed for finishing operations on steel. Its chemistry and microstructure combine wear resistance with a cutting geometry that delivers a high surface finish while keeping low cutting forces, which reduces chatter and improves dimensional stability on long workpieces. For continuous cuts and small depth passes the material pairing is particularly efficient: the cermet edge maintains sharpness longer than conventional grades, so the process yields consistent part quality over longer tool life. The result is a reduction in rework and downstream polishing time from the first pass. Reliable fit, ISO conformity and clear geometry for easy integration This indexable insert is made to the ISO CNMG120404 form — a rhombic shape with an 80° approach angle — and features a 0° rake angle, giving a predictable cutting direction and contact point for standard external and internal turning holders. The insert is supplied with a cylindrical hole, so compatibility with a clamping system depends on the holder’s shape, clearance angle, tolerance class, fastening method, size and thickness. Specifying an ISO-compliant insert simplifies tool selection and changeover in mixed-machine environments, enabling faster set-up and reliable repeatability across multiple machines. Practical application: choose the chipbreaker and setup for best results Designed as a finishing grade, the insert pairs best with small radial depths and steady feedrates; its double-sided chipbreaker supports stable chip control in continuous turning and helps maintain surface integrity. For steels where built-up edge could occur, the sharp cermet edge minimises adhesion and preserves the required finish. When machining less stable setups or interrupted cuts, selecting a more robust chipformer and adjusting feeds can extend life. For complex or unfamiliar applications, the combination of grade, chipbreaker and holder geometry can be reviewed with a tooling specialist to match process stability and the desired surface specification. Contact Metav Werkzeuge for tailored recommendations on Tungaloy NS9530 finishing inserts or to arrange fast supply and technical support Technical data Article number: 6707284 SKU: 6707284-Tungaloy Manufacturer SKU: TUN6707284 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 mm Approach angle: 80° Rake angle: 0° Special features ISO designation: CNMG120404 Grade: NS9530 (uncoated cermet) Plate form: rhombic Hole style: cylindrical hole, with hole Chipbreaker: double-sided Typical application: turning Schneidstofftyp: uncoated cermet FAQ Is this insert suitable for finishing steel? This CNMG 120404 NS9530 Tungaloy turning insert (SKU TUN6707284) is optimised as a finishing grade for steel, offering a sharp edge and low cutting forces for high surface quality on continuous cuts. Which holder features determine compatibility with the insert? Compatibility is governed by holder form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical-hole clamping must match the insert’s geometry for secure fixation. Can the insert be used for internal as well as external turning? Yes, the geometry and rhombic form make it suitable for both external and internal turning when the correct holder and approach are selected; ideal results are achieved with steady feeds and small depths of cut. Is the cutting edge coated or uncoated? The grade is an uncoated cermet (NS9530), chosen to provide a very sharp, wear-resistant edge for finishing; coated alternatives are available in other grades if coating is required for specific applications. How does the double-sided chipbreaker affect use and indexing? A double-sided chipbreaker provides stable chip control in two orientations and supports the intended finishing feeds; indexing strategy depends on the insert’s geometry and the clamping system used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance and low cutting forces from the uncoated NS9530 cermet, combined with ISO CNMG geometry and a 0.4 mm corner radius, deliver consistent surface quality and efficient turning. Order this insert directly via Metav Werkzeuge or contact our consultants for machining recommendations. CNMG 120404 NS9530 ISO turning insert for finishing — Tungaloy CNMG120404 NS9530 is an ISO-conforming rhombic insert designed for precision turning of steel, offering a sharp uncoated cermet edge for high surface finish. ISO-conforming CNMG geometry Uncoated NS9530 cermet for fine finishing 0.4 mm corner radius for superior finish Rhombic shape with cylindrical hole for secure clamping High-precision finishing for steel turning The combination of the NS9530 uncoated cermet grade and the CNMG geometry is optimised for finishing operations on steel. With a corner radius of 0.4 mm and a sharp cutting edge, this insert reduces cutting forces and promotes a superior surface finish, particularly in continuous cuts and small depths of cut. The fine-grain cermet composition improves edge integrity at finishing speeds, enabling stable, repeatable results and reducing the need for secondary operations. As a result, cycle times can be reduced while maintaining tight surface quality requirements. Compatibility and secure mounting for reliable production The insert follows the ISO designation CNMG120404, so compatibility with holders is determined by form, free clearance, tolerance class, fastening system, size and thickness. The rhombic plate form with an 80° included angle and a cylindrical hole ensures firm clamping in standard CNMG toolholders. The plate is reversible and features a double-sided chipbreaker, which supports indexing for renewed cutting edges. Manufacturers and workshops benefit from straightforward replacement procedures and predictable tool set-up when the matched holder, clamping set and screw are used. Practical machining guidance and expected benefits With a plate thickness of 4.76 mm and an inscribed circle size of 12 mm, the insert suits operations where rigidity and edge stability matter. The free clearance angle of 0° supports a sharp engagement for finishing passes; however, adequate workpiece support and machine stiffness remain decisive for optimal performance. The double-sided chipbreaker and the uncoated cermet grade are particularly effective for uninterrupted cutting conditions and produce consistently fine finishes. For selection of cutting data and chipbreaker options, the insert geometry and the workpiece material must be matched to achieve the best balance between tool life and surface quality. Contact Metav Werkzeuge today for a technical recommendation on the CNMG120404 NS9530 turning insert from Tungaloy, quoting SKU TUN6998130 for fast assistance Technical data Article number: 6998130-Tungaloy Manufacturer SKU: TUN6998130 Manufacturer article number: 6998130 Model series: ISO indexable turning inserts ISO designation: CNMG120404 Grade: NS9530 Manufacturer: Tungaloy Facts Plate thickness: 4.76 mm Corner radius: 0.4 mm Inscribed circle: 12 mm Included angle: 80° Free clearance angle: 0° Special features Uncoated cermet cutting material (NS9530) Rhombic plate form (CNMG) Double-sided chipbreaker design Cylindrical hole for standard clamping Intended use: finishing operations on steel ISO-conforming insert compatible with standard holders FAQ What materials is this insert best suited for? This CNMG120404 NS9530 insert is formulated as a finishing grade for steel; the uncoated NS9530 cermet provides a sharp edge and low cutting forces for high-quality finishes on steel components. What are the key geometric specifications to consider? The insert has a corner radius of 0.4 mm, a plate thickness of 4.76 mm and an included angle of 80°; these dimensions influence edge strength and recommended depths of cut for finishing passes. Can the insert be indexed to a fresh cutting edge? Yes, the plate features a double-sided chipbreaker and a reversible rhombic form, allowing indexing to use additional cutting edges before replacement. How is the insert mounted in the holder? Mounting requires a compatible CNMG holder with the correct clamp and screw; the insert’s cylindrical hole and ISO geometry ensure secure clamping when the holder matches form, free angle and tolerance class. Which holders are compatible with this ISO designation? Standard CNMG-compatible turning holders designed for the 120404 size and 12 mm inscribed circle are suitable; verify holder geometry and clamping method to ensure correct fit and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and reliable chip control to improve cycle times and surface quality; order the CNMG120404 NS9530 insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. CNMG120404 NS9530 Tungaloy CNMG indexable turning insert for finishing (Turning) The CNMG120404 NS9530 Tungaloy insert is an ISO-standard rhombic turning insert developed for finishing operations on steel, delivering a sharp cutting edge and consistently high surface quality. High-quality uncoated cermet grade NS9530 Optimised for finishing cuts on steel Double-sided chipbreaker for stable chip control ISO CNMG 120404 geometry with 0.4 mm radius Reduced cutting forces for consistent finishing The insert employs an uncoated cermet grade designed to deliver a sharp cutting edge with lower friction compared with many coated grades, which translates into reduced cutting forces during continuous finishing passes. Lower forces mean fewer vibrations and improved dimensional stability on long, slender parts. For manufacturers aiming to tighten tolerances in serial turning, this geometry and grade help to maintain repeatable results while reducing the need for secondary grinding or ultra-fine finishing operations. Stable chip control and predictable tool life A double-sided chipbreaker combined with the CNMG rhombic shape provides controlled chip formation across common steel grades. The chip control is particularly effective in continuous cuts with small depths of cut, ensuring predictable evacuation and reduced risk of built-up edge. As a result, process reliability improves and machine downtime is minimised, which benefits small-batch job shops and high-volume production alike. Geometry and dimensions that aid fixture compatibility Designed to the ISO 120404 specification, the insert has a nominal 0.4 mm corner radius and an 80° approach angle, with a plate thickness of 4.76 mm and a 12 mm inscribed circle. These standardised dimensions ensure compatibility with a wide range of CNMG holders and boring bars; selection of the proper holder is governed by form, rake clearance, tolerance class, clamping method and size. The cylindrical hole and the standard mount make replacement straightforward and keep setup times short. Practical benefits for shop-floor decision-making Choosing this cermet finishing insert supports a clear cost-benefit rationale: improved surface finish with reduced secondary operations and stable chip control that lowers rework rates. The combination of ISO compliance, standardised mounting and a finishing-grade substrate helps to integrate the insert seamlessly into existing tool inventories. For applications where continuous cuts and small feed rates predominate, the grade promotes consistent surface integrity and reduced scrap. For product availability or material-specific process advice on Tungaloy finishing inserts such as the CNMG120404 NS9530, contact Metav Werkzeuge for expert consultation and immediate ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998269 SKU: 6998269-Tungaloy Manufacturer SKU: TUN6998269 Facts Angle: 80° Corner radius: 0.4 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Rhombic CNMG geometry Cylindrical hole, with hole ISO 120404 designation Application: turning, finishing on steel FAQ What materials is this insert suited to? The CNMG120404 NS9530 Tungaloy insert is specified as a finishing grade for steel and performs best in continuous turning operations on common steel grades. Can the insert be used in interrupted cuts? This uncoated cermet grade is optimised for continuous finishing cuts; for severe interruptions or heavy interrupted cutting, a different insert geometry or a tougher grade may be preferable. How does the 0.4 mm radius affect finish and strength? A 0.4 mm corner radius provides a balance between a fine surface finish and sufficient edge strength for small depths of cut, making it suitable for precision finishing while maintaining robustness. Is the insert reversible or single-use per edge? The CNMG form is double-sided and indexable; both sides and multiple cutting edges can be used according to the insert’s geometry and wear condition to extend effective tool life. Which holders are compatible with ISO CNMG 120404 inserts? Compatibility depends on holder form, rake clearance, tolerance class, clamping method, size and thickness; CNMG-standard external holders and boring bars matching ISO CNMG dimensions are typically suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the finishing performance of the NS9530 cermet grade combined with ISO compatibility and a compact 0.4 mm corner radius for consistently high surface quality and low cutting forces. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and process setup. CNMG 120404 NS9530 ISO turning insert for finishing by Tungaloy CNMG120404 NS9530 is an ISO-standard rhombic turning insert designed for finishing steel in external and internal turning operations. ISO-format rhombic indexable insert Uncoated cermet grade NS9530 for finishes 0.4 mm corner radius for fine detail Cylindrical hole for secure clamping Greater productivity through low cutting forces and superior finish The NS9530 grade is an uncoated cermet developed for finishing applications in steel, providing a sharp cutting edge and reduced cutting forces that translate into improved tool life and fewer rework cycles. Cermet cutting materials combine ceramic and metallic properties to sustain a keen edge at low to moderate cutting speeds; this makes the insert particularly suited to continuous cuts and small depths of cut, where surface integrity matters. The result is a reproducible, high-quality surface finish with lower vibration sensitivity than many alternatives. Reliable geometry and ISO compatibility for straightforward integration The CNMG120404 geometry features an 80° included angle, a 0° relief angle, and a 0.4 mm corner radius, all conforming to ISO dimensions to ensure compatibility with a wide range of external holders and boring bars. Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the rhombic shape and cylindrical hole provide secure mounting and permit indexing to a fresh cutting edge when required. Clear explanation of these parameters simplifies selection: the included angle governs clearance and strength, the radius affects edge robustness and finish, and the hole style dictates clamping options. Stable chip control and application guidance for consistent results Equipped with a double-sided chipbreaker, the insert assists in controlled chip formation during finishing passes, which reduces the risk of surface damage and improves process stability. Typical system setup comprises the ISO insert plus a matching external holder or boring bar, a backing/locking set and replacement clamp screws. For finishing steel, select conservative feed rates and ensure machine rigidity; the cermet grade performs best at moderate speeds with consistent, light passes. For indexable tooling strategies, the reversible nature of the insert helps lower tooling costs while maintaining repeatable quality. For process assurance with Tungaloy finishing inserts, contact Metav Werkzeuge for stock availability and holder compatibility — experts are available to advise on setup and selection via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998128 Manufacturer SKU: TUN6998128 SKU: 6998128-Tungaloy Facts Corner radius: 0.4 mm Insert size: 12 mm Thickness: 4.76 mm Included angle: 80° Relief angle: 0° ISO designation: 120404 Special features Uncoated cermet grade NS9530 Rhombic insert shape Double-sided chipbreaker Cylindrical hole for clamping ISO-series indexable turning insert Typical application: external and internal turning FAQ What machining tasks is this insert best suited for? The CNMG120404 NS9530 insert is optimised for finishing operations in steel, providing a sharp edge and low cutting forces ideal for continuous cuts and fine surface quality. How does the NS9530 cermet grade differ from coated carbide options? NS9530 is an uncoated cermet designed to retain a sharp edge and offer excellent surface finish at moderate cutting speeds; it differs from coated carbide by favouring edge integrity over extreme wear resistance at very high speeds. Is the insert compatible with standard CNMG holders? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the CNMG120404 conforms to ISO dimensions to simplify matching with standard holders and boring bars. Can the insert be indexed to reduce tooling costs? Yes, the insert is double-sided and indexable, allowing the unused edge to be rotated into service, which supports cost-effective tooling strategies. Does the insert include a chipbreaker and what benefit does it provide? The insert features a double-sided chipbreaker that promotes controlled chip formation, improving process stability and reducing the risk of surface damage during finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
The combination of an NS9530 uncoated cermet grade and ISO CNMG geometry delivers precise finishing and low cutting forces for continuous steel turning. Benefit from a double-sided chipbreaker and secure clamping via the cylindrical hole for stable production results. Order directly through Metav Werkzeuge or consult their advisers for tool selection and process parameters. CNMG 120404 NS9530 Tungaloy indexable insert – precision turning, uncoated cermet The CNMG120404 NS9530 is an ISO-standard indexable insert for turning, engineered as a finishing grade for steels with a sharp cutting edge and consistently high surface quality ISO-standard CNMG 120404 geometry NS9530 uncoated cermet for fine finishing Double-sided chipbreaker, cylindrical hole Low cutting forces and high surface finish Consistent fine finishing for steel turning The NS9530 grade is an uncoated cermet developed for finishing operations on steels, offering a sharp cutting edge and reduced friction at the tool–workpiece interface. The grade promotes low cutting forces, which helps to lower vibration and improves dimensional stability during continuous cuts and small depths of cut. As a result, operators can expect an improved surface finish and reduced need for secondary machining when this finishing insert is applied in the correct cutting window. ISO compatibility for predictable tool set-up Built to ISO geometry, the insert ensures predictable fitting and repeatable clamping with compatible holders. Key geometric parameters such as the 0° clearance, the 80° approach angle, the rhombic plate form and the plate thickness of 4.76 mm determine compatibility with a wide range of external holders and boring bars. Because holder compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness, the ISO specification simplifies tool changeovers and supports a standardised tool inventory across the shop floor. Reduced downtime through double-sided productivity The double-sided chipbreaker offers multiple usable edges, effectively extending time between indexings and lowering tooling costs per part. The cylindrical hole provides reliable location and secure clamping, contributing to stable chip formation and repeatable machining results. For finishing cuts, the combination of the NS9530 substrate and the dedicated chip control geometry supports productive machining, particularly when small feeds and light depths of cut are used to achieve the target surface quality. For technical guidance or to specify the CNMG 120404 NS9530 from Tungaloy for a particular turning application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering information. Technical data Article number: 6998121 Manufacturer SKU: TUN6998121 SKU: 6998121-Tungaloy Designation: CNMG120404 NS9530 Tungaloy indexable insert Facts Approach angle: 80° Corner radius: 0.4 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 0° Special features NS9530 uncoated cermet grade Double-sided chipbreaker Cylindrical hole (zylindrical hole) Rhombic plate form ISO designation CNMG120404 Application: turning Model series: ISO turning indexable inserts FAQ What workpiece materials is this insert intended for? The CNMG120404 NS9530 Tungaloy indexable insert is specified as a finishing grade for steels; the NS9530 cermet provides the edge geometry and low cutting forces suited to continuous finishing passes on steel components. Is the insert reversible and how many edges are usable? Thanks to the double-sided chipbreaker and the rhombic plate form, multiple cutting edges are available; the design allows indexing for extended tool life and consistent results. How is compatibility with holders ensured? Compatibility is determined by ISO geometry—form, clearance angle, tolerance class, fastening, size and thickness—so holders matching CNMG 120404 geometry provide correct seating and clamping. What edge radius is recommended for fine finishing? A corner radius of 0.4 mm suits fine finishing where excellent surface quality is required; matching feed and depth of cut to the radius will preserve the sharp edge performance. Is the insert coated? The NS9530 grade in this insert is uncoated cermet, selected for its sharp edge and low cutting resistance in finishing applications on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and the robustness of an uncoated cermet NS9530 grade for consistent surface quality and long tool life. The combination of a sharp cutting edge, 0.4 mm corner radius and ISO compatibility ensures reliable turning performance. Order the CNMG120404 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 120404 NS9530 — CNMG120404 indexable turning insert by Tungaloy for turning (uncoated cermet, 0.4 mm radius) A CNMG120404 NS9530 indexable turning insert optimised for fine finishing of steel, delivering a sharp cutting edge with reduced cutting forces and excellent surface quality. Uncoated cermet NS9530 for fine finishing Sharp cutting edge with low cutting forces Rhombic 80° geometry, 0.4 mm corner radius Double-sided with cylindrical centre hole Outstanding surface quality for steel finishing The uncoated cermet grade NS9530 is engineered for fine finishing of steel components, providing a consistently sharp edge that reduces rubbing and cutting forces during continuous cuts. As an ISO turning insert, this grade minimises built-up edge and helps achieve superior surface roughness with small depths of cut. The result is an efficient finishing process with fewer rework cycles and predictable part quality, especially in high-volume and precision environments. Robust geometry and secure clamping for stable turning The rhombic 80° form combined with a 0.4 mm radius and 4.76 mm thickness creates a stable cutting geometry that resists edge chipping under light to moderate loads. The insert is supplied with a cylindrical hole, permitting secure fastening and correct seating in ISO-compliant holders. Compatibility with a given toolholder depends on form, relief angle, tolerance class, attachment method, size and thickness, so selection of the correct holder and screw is essential for consistent performance. Efficient production through double-sided design and chip control The double-sided design effectively doubles the number of usable cutting edges, improving cost-efficiency per edge while simplifying inventory management. The integrated chipbreaker suited to finishing operations promotes predictable chip formation and evacuation, which supports uninterrupted turning cycles and reduces downtime. The insert’s Tungaloy engineering balances edge sharpness and wear resistance to provide repeatable results across batch production. Recommended applications and tooling considerations Designed primarily for external and internal turning, this indexable insert excels in continuous cutting and small feed operations where surface finish and dimensional control are priorities. Select a matching chipbreaker and grade according to workpiece stability and machining parameters; for less stable setups, opt for a more robust chip control geometry. Where necessary, pair the insert with a suitable ISO-format holder, underlay/clamp set and replacement screws to complete the system and ensure proper torque and seating. Contact Metav Werkzeuge for tailored advice on Tungaloy CNMG120404 NS9530 indexable inserts and recommended holder configurations; our technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998124 SKU: 6998124-Tungaloy Manufacturer SKU: TUN6998124 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Plate thickness: 4.76 mm Insert size: 12 mm Design & features Material: Hartmetall Grade: NS9530 (uncoated cermet) Shape: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning System: ISO turning indexable insert Typical use: external and internal turning Compatibility: determined by form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The NS9530 grade is optimised for finishing operations on steel; the CNMG120404 NS9530 insert provides a sharp edge and low cutting forces for improved surface quality on steel components. How does the insert fix to the holder? The insert features a cylindrical centre hole for secure fastening; correct seating in an ISO-format holder is determined by form, relief angle, tolerance class, size and thickness. Is the insert single- or double-sided? This CNMG120404 model is double-sided, offering two usable cutting edges per side and thus multiple indexing options to extend tool life. Which chipbreaker should be chosen for finishing? A fine finishing chipbreaker matched to the NS9530 grade and the workpiece stability is recommended to ensure optimum surface finish and controlled chip formation. Can the CNMG120404 NS9530 be used for internal turning? Yes, the insert is suitable for both external and internal turning operations, particularly in continuous cut scenarios and small depth-of-cut finishing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet grade for superior finishing of steel components and the 0.4 mm nose radius for consistent surface quality; select the matching ISO holder and clamping set for reliable assembly and order directly via Metav Werkzeuge or consult our technical advisers for application support. CNMG120404 NS9530 CNMG turning insert for finishing by Tungaloy A CNMG120404 NS9530 indexable turning insert designed for finishing operations in steel turning, compliant with ISO dimensions and suitable for use in standard rhombic holders ISO rhombic insert, 80° included angle Uncoated cermet for fine finishing Double-sided chipbreaker for uninterrupted cuts Cylindrical hole mounting, ISO holder compatible Superior surface quality for finishing in steel The NS9530 grade is an uncoated cermet developed for finishing applications in steel, delivering a sharp cutting edge with reduced cutting forces and improved surface quality. As a finishing insert, it performs best with small depths of cut and continuous machining, where the material's hardness and edge stability translate directly into measurable reductions in rework and polishing. The combination of the cermet substrate and the geometry produces a fine, predictable chip formation that helps maintain a consistent surface finish across batches. Straightforward integration into ISO turning systems Designed to the ISO series dimensions, the rhombic CNMG120404 geometry and the cylindrical mounting hole ensure compatibility with a wide range of external holders. The 80° included angle and 0° clearance support stable tool engagement while the 4.76 mm plate thickness and 0.4 mm nose radius provide a balance between stiffness and fine detail. Because holder compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness, fitting this insert into existing tool systems is primarily a matter of matching those parameters, which simplifies setup and reduces downtime. Reliable cutting behaviour and practical application advice The insert features a double-sided chipbreaker, giving two useful cutting edges per index, and it is intended for continuous cutting where low cutting forces and reproducible chips are required. For optimal results, pair the insert with a holder and clamping set suited to the workpiece stability; select a chipbreaker and grade aligning with the work material and intended cut depth. The system concept comprises the ISO turning insert, a compatible external holder or boring bar, a backing/clamping set and replacement screws—keeping spare hardware on hand supports uninterrupted production. Choose the Tungaloy NS9530 finishing insert for dependable steel finishing; order through Metav Werkzeuge or contact Metav Werkzeuge for tailored application advice and quick availability Technical data Article number: 6998141 Manufacturer SKU: TUN6998141 SKU: 6998141-Tungaloy Manufacturer article number: 6998141 Model series: ISO-Drehwendeschneidplatten Designation: CNMG120404 NS9530 Tungaloy‑Wendeplatte Numerical data Size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Grade: NS9530 (uncoated cermet) Application: turning, finishing in steel Chipbreaker: double-sided Shape: rhombic System compatibility: ISO turning insert series FAQ What materials is this insert suitable for? The CNMG120404 NS9530 Tungaloy turning insert is a finishing grade optimised for steel; its cermet composition and edge geometry make it particularly effective for achieving high surface quality on continuous cuts in steel. Is the NS9530 grade coated? No, NS9530 is supplied as an uncoated cermet grade; the lack of coating contributes to the sharp cutting edge and low cutting forces expected in finishing operations. How is the insert mounted in the toolholder? The insert uses a cylindrical hole for mounting and follows ISO dimensions; compatibility with holders is achieved by matching form, relief angle, tolerance class, fixing method, size and thickness. Which cutting conditions suit this insert best? This insert is intended for finishing: small depths of cut, continuous machining and stable workholding deliver the best surface results while keeping cutting forces low. Can the insert be indexed to use multiple edges? Yes, the double-sided chipbreaker provides multiple usable edges; the insert can be indexed according to the ISO geometry to exploit spare cutting corners. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing, robust carbide construction and straightforward holder compatibility for consistent turning performance; order supply or request technical advice via Metav Werkzeuge for quick integration into existing processes. CNMG 120404 NS9530 turning insert — rhombic 80° cermet finishing insert — Tungaloy CNMG 120404 NS9530 is a rhombic, ISO-format turning insert designed for finishing operations on steel where a sharp cutting edge and excellent surface quality are required. Cermet finishing grade NS9530 Rhombic geometry, 80° included angle 0° rake and sharp cutting edge Double-sided chipbreaker with cylindrical hole High-precision finishing with a cermet edge The uncoated cermet grade NS9530 is developed for finishing cuts on steel, offering a combination of a stable cutting edge and low cutting forces. In practical terms this means improved dimensional precision and a finer surface finish on continuous turning passes. Cermet consists of ceramic particles bonded with metal, which gives a wear‑resistant, sharp edge suited to small depths of cut and steady feed rates. The result is reduced rework and longer stable surface quality compared with conventional grades in similar applications. Easy integration into ISO turning systems for reliable process setup The insert follows ISO geometry standards so compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness rather than proprietary fittings. The rhombic geometry with an 80° included angle and a 0° rake provides predictable cutting engagement for external and internal turning. Key dimensions such as size 12, thickness 4.76 mm and a corner radius of 0.4 mm make selection and fixture straightforward, while the cylindrical hole and double-sided chipbreaker support secure clamping and two usable edges per index. These attributes simplify tool‑making logistics and reduce setup time in production. Recommended use and practical benefits in production This grade is a dedicated finishing insert for turning operations, particularly when smooth surfaces and tight tolerances are required in serial production. Select the double-sided chipbreaker and the NS9530 grade for continuous cutting on steels to benefit from stable chip formation and extended edge life. For mixed or interrupted cuts, evaluate holder stability and adapt cutting parameters: sharper edges favour reduced cutting forces but require steady machine and workpiece support. Choosing this insert supports process reliability and consistent part quality, helping to keep downstream finishing and inspection needs to a minimum. For precise finishing with the Tungaloy NS9530 cermet insert, contact Metav Werkzeuge for selection support and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998140 SKU: 6998140-Tungaloy Manufacturer SKU: TUN6998140 Core specifications Size: 12 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Rake angle: 0° Materials & features Material: cemented carbide body Grade: NS9530 (uncoated cermet finishing grade) Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical Application: turning (external and internal) Model series: ISO turning inserts FAQ Is this insert suitable for finishing steel components? The CNMG 120404 NS9530 insert is specified as a finishing grade for steel; the uncoated NS9530 cermet provides a sharp edge and low cutting forces ideal for continuous finishing passes. How many cutting edges are available per insert? The insert features a double-sided chipbreaker and a rhombic form, giving two usable edges per index before re‑orientation or replacement is required. What holder characteristics are important for compatibility? Compatibility depends on form, relief (rake) angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO rhombic shape, 4.76 mm thickness and the cylindrical hole to secure the insert correctly. Can the insert be used for internal turning? Yes, the ISO rhombic format and sharp cermet edge suit both external and internal turning applications where finishing and surface quality are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Data conflict detected: the item is specified both as an uncoated cermet grade and as cemented carbide, which cannot be reconciled; please provide corrected technical information to enable a full product description, ensuring that all material classifications are accurate and consistent with industry standards to avoid further discrepancies or misunderstandings in the documentation process, as this inconsistency may lead to errors in application, manufacturing, or performance expectations, potentially impacting quality control, customer satisfaction, and overall operational efficiency, so it is crucial to clarify whether the item in question is intended to be categorised as an uncoated cermet grade or as cemented carbide to ensure proper alignment with technical specifications.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Combine precise finishing performance, low cutting forces and reliable ISO compatibility for efficient turning operations; order the insert via Metav Werkzeuge or consult our specialists for application support. CNMG 120404 NS9530 turning insert — finishing grade for Stahl by Tungaloy A CNMG120404 NS9530 ISO turning insert engineered for high-quality finishing of Stahl components in continuous-cut regimes. ISO-standard rhombic insert CNMG120404 Uncoated cermet grade NS9530 for finishing Sharp cutting edge reduces cutting forces Through-hole mounting, compatible with ISO holders Consistent finishing quality with reduced cutting forces The finishing grade is based on an uncoated cermet formulation (NS9530) that delivers a sharp cutting edge and sustained edge stability in light cutting depths. This results in low cutting forces and an improved surface finish on Stahl components, especially under continuous-cut conditions. The chemistry and microstructure of the cutting material are optimised for fine stock removal rather than heavy interrupted cuts, so the emphasis is on reproducible part quality and extended edge life during finishing passes. Geometry and mounting that speed set-up and stability The rhombic insert geometry with an 80° lead angle, 0° relief angle and a 0.4 mm corner radius provides predictable cutting behaviour and easy programme transfer between machines. The insert is double-sided with a through-hole, cylindrical mounting, enabling rapid indexing and secure clamping in standard ISO holders. The plate thickness of 4.76 mm and nominal size 12 mm contribute to mechanical stability while keeping the cutting-edge accessible for finely tuned turning cycles. Practical process advantages for shopfloor productivity Selecting the NS9530 finishing grade reduces rework and polishing effort, which shortens downstream handling times. The combination of ISO compliance, a defined corner radius and a sharp edge means stable chip formation and consistent dimensional control when used with appropriate feeds and speeds. Where surface quality and minimised cutting forces are priorities, this insert supports efficient cycle times and predictable tool-change intervals in production environments. For high-finish turning tasks, choose the Tungaloy NS9530 finishing grade — contact Metav Werkzeuge for tailored recommendations and technical data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998119 Manufacturer SKU: TUN6998119 Label / SKU: 6998119-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG120404 NS9530 Tungaloy-Wendeplatte Core dimensions Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead angle: 80° Features and applications Cutting material: uncoated cermet (NS9530) Shape: rhombic (CNMG) Mounting: through-hole, cylindrical hole Chip control: double-sided chipbreaker Intended use: Turning (finishing) on Stahl Compatibility: ISO-standard holders and toolposts FAQ What materials is this insert intended for? The CNMG120404 NS9530 grade is designed primarily for finishing operations on Stahl, where a sharp edge and low cutting forces are required for high surface quality. Can the insert be used in standard ISO holders? Yes, the insert is an ISO-format rhombic plate with a through-hole and cylindrical style, intended for secure clamping in standard ISO turning holders. How does the NS9530 grade differ from general-purpose grades? NS9530 is an uncoated cermet finishing grade formulated to provide a sharp cutting edge and low cutting forces for continuous finishing cuts, offering superior surface finish compared with general-purpose carbide grades. What are the key geometry values to consider for programming? Key values include the 80° lead angle, 0° relief angle and 0.4 mm corner radius; these parameters affect engagement, chip flow and final surface finish during turning with the CNMG120404 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated cermet cutting edge, a precise 0.4 mm corner radius, and ISO compatibility for reliable finishing operations; order the item via Metav Werkzeuge or request support from the consultants for process integration. CNMG 120404 NS9530 indexable turning insert — Tungaloy, ISO 120404, finishing grade A CNMG120404 NS9530 indexable insert designed for precision turning and fine finishing of steel components. Cermet NS9530 for high surface finish ISO CNMG120404 form for standard holder compatibility 0.4 mm corner radius for fine finishing Double-sided chipbreaker with cylindrical hole Achieve superior surface finish with a cermet finishing grade The uncoated cermet grade NS9530 is formulated for low cutting forces and a consistently sharp cutting edge, delivering improved surface quality on steel during finishing passes. Cermet combines ceramic hardness with metal toughness, so the insert sustains a keen edge at low feed rates and small depths of cut; this translates into reliably smooth finishes and reduced need for manual rework. Continuous cutting conditions benefit most from these properties, where stable chip formation and minimal edge wear support consistent part quality. Confident clamping and ISO-based compatibility for production lines Constructed to the ISO CNMG120404 form, the insert fits a wide range of standard external holders and boring bars when the holder geometry, clearance angle and tolerance class match. The plate is rhombic with an included angle of 80°, a 0° clearance, and a cylindrical hole, while the plate thickness measures 4.76 mm and the nominal size is 12 mm. These measurable parameters enable straightforward integration into existing tool systems and ensure repeatable clamping, which is essential for process stability in serial production. Lower forces, higher efficiency: what the sharp edge enables A sharp, uncoated cermet edge reduces cutting resistance, which lowers spindle load and can permit modest increases in cutting speed under the right conditions. The sharp cutting edge and low cutting forces make the insert especially efficient for finishing passes, where improved surface integrity and minimal thermally induced damage are priorities. Selecting the appropriate double-sided chipbreaker and matching the grade to the workpiece material and machining stability helps to extend effective tool life and to sustain consistent cycle times. Practical setup recommendations for reliable results For outer and inner turning operations, pair the insert with a suitable rigid holder and the correct shim or clamp set to maintain axial and radial stability. The system build typically comprises the ISO insert, an external holder or boring bar, a shim/underlay and replacement screws; ensuring the holder’s geometry matches the insert’s form prevents misalignment and premature wear. Choose the chipbreaker and machining parameters according to material, feed and depth of cut — the double-sided chipbreaker offers economy by allowing index rotation once one cutting edge is worn. Contact Metav Werkzeuge to discuss Tungaloy CNMG 120404 NS9530 inserts for your turning applications or to arrange tailored machining recommendations from our specialists Technical data Article number: 6998138-Tungaloy Manufacturer SKU: TUN6998138 Manufacturer article number: 6998138 Model series: ISO-Drehwendeschneidplatten ISO designation: CNMG120404 Application: Turning Typical use: External and internal turning Facts Included angle: 80° Corner radius: 0.4 mm Clearance (relief) angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Grade: NS9530 Cutting material type: uncoated cermet Chipbreaker: double-sided Plate form: rhombic Hole style: cylindrical hole System components: insert, holder, shim/clamp set, replacement screws FAQ What applications is this insert best suited for? The CNMG120404 NS9530 Tungaloy indexable insert is optimised for finishing operations in turning, particularly for steel components where a high surface finish is required. Is the insert compatible with standard holders? Compatibility is provided by the ISO CNMG120404 form; compatibility depends on holder form, tolerance class, fastening method, size and thickness. What does the NS9530 grade indicate? NS9530 denotes an uncoated cermet finishing grade developed for sharp cutting edges, low cutting forces and good surface integrity on steel. How should the insert be used to achieve the best surface finish? Use small depths of cut and continuous cutting conditions, pair the insert with a rigid holder and select the double-sided chipbreaker appropriate to the operation for stable chip control. Can the insert be rotated or indexed during use? The insert is double-sided and can be indexed to use additional cutting edges; ensure correct clamping and torque for secure repositioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that combines sharp cutting edges, consistent surface quality and straightforward holder compatibility for an efficient turning process; order directly through Metav Werkzeuge or consult our specialists for application advice. CNMG 120404 NS9530 turning insert by Tungaloy — uncoated cermet, 0° rake The CNMG120404 NS9530 Tungaloy indexable insert is a rhombic ISO turning insert designed for finishing steel with a sharp cutting edge and low cutting forces. ISO rhombic CNMG geometry Uncoated cermet grade NS9530 0° rake angle for finishing Double-sided chipbreaker, with hole Superior surface finish for finishing cuts The uncoated cermet grade NS9530 is formulated for low cutting forces and a consistently fine surface finish when performing finishing cuts on steel. Its edge geometry promotes stable contact and reduced built-up edge formation during continuous cutting, which results in fewer downstream grinding or polishing steps. For operations where surface quality matters, choosing a finishing-grade insert reduces cycle time and improves first-pass part acceptance. Geometry that supports stable machining and repeatability The CNMG form with an 80° included angle and a 0.4 mm corner radius provides a reliable compromise between strength and edge definition. The 0° relief (rake) contributes to predictable cutting behaviour on small depths of cut, while the rhombic plate shape ensures compatibility with a wide range of ISO holders. These geometrical features translate into reproducible performance on batch production runs and help maintain consistent part dimensions over longer tool life. Material and grade benefits explained Being an uncoated cermet, the grade focuses on edge integrity and excellent finished part appearance rather than aggressive wear resistance at high temperatures. This makes the insert particularly suitable for continuous finishing passes on steel where thermal loads are moderate and surface integrity is critical. The absence of a coating can also simplify edge preparation and minimise the risk of coating-related chipping when light, precise cuts are required. Practical use and holder compatibility The ISO designation reflects standardised dimensions and tolerances, so compatibility with the correct external holder or boring bar is determined by plate form, relief angle, tolerance class, fastening method, size and thickness. The insert is double-sided and supplied with a cylindrical hole for secure mounting; matching the insert to a suitable clamping set and fastener completes a robust system for turning tasks. Selecting the appropriate chipbreaker and grade ensures productivity while preserving part quality. For precise finishing on steel components, contact Metav Werkzeuge for application support and secure supply of Tungaloy CNMG inserts — order enquiries and technical guidance are available via Metav Werkzeuge. Technical data Article number: 6998144 Manufacturer SKU: TUN6998144 Model series: ISO turning indexable inserts ISO designation: 120404 Designation: CNMG120404 Facts Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Rake/relief angle: 0° Special features Grade: NS9530 Cutting material: uncoated cermet Plate form: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Typical application: finishing on steel FAQ What materials is this insert intended for? The NS9530 cermet grade is designed primarily for finishing operations on steel, delivering low cutting forces and high surface quality with the CNMG120404 geometry. How does the 0° rake affect performance? A 0° rake provides predictable cutting behaviour for finishing passes; the CNMG120404 geometry with a 0° relief helps maintain edge strength while producing a fine surface finish. Is the insert compatible with standard ISO holders? Yes, the ISO designation and rhombic form mean the insert is compatible with holders that accept CNMG plates, subject to matching by form, thickness and fastening method. What are the measurable dimensions of the insert? The insert has a 12 mm inscribed circle, 4.76 mm thickness and a 0.4 mm corner radius, as specified for CNMG120404 grade NS9530. Which chipbreaker should be used for finishing? The supplied double-sided chipbreaker is intended for controlled chip formation during finishing; selecting the correct chipbreaker variant and cutting parameters ensures the best surface and productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated cermet cutting grade, precise ISO CNMG geometry and a small nose radius to achieve outstanding surface finishes and low cutting forces on steel; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for process guidance. CNMG120404 NS9530 CNMG 120404 turning insert for finishing — Tungaloy CNMG120404 NS9530 is an ISO‑standard indexable turning insert engineered for fine finishing of steel in continuous turning operations ISO CNMG 120404 geometry for interchangeability Uncoated cermet NS9530 for finishing of steel 0.4 mm nose radius for fine surface quality Double‑sided chipbreaker with cylindrical hole Achieve high‑quality finishes with a finishing‑grade cermet The CNMG120404 NS9530 insert combines an uncoated cermet cutting grade with a sharp cutting edge, designed specifically to reduce cutting forces and improve surface integrity when turning steel. Cermet materials merge ceramic hardness with metal toughness, which in practice means lower built‑up edge, enhanced wear resistance in continuous cutting and consistently superior part surfaces. The small 0.4 mm nose radius is ideal for producing fine finishes and holding tight form tolerances without excessive cutting loads, while the 0° rake supports stable chip formation during light finishing cuts. Reliable interchangeability and secure clamping in ISO holders Built to the ISO CNMG120404 form, this insert ensures clear compatibility with matching external holders and boring bars; compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness. The rhombic plate form, 12 mm size and 4.76 mm thickness are industry standard dimensions that simplify tool procurement and tooling set‑up. The insert is supplied with a cylindrical hole, allowing secure fastening with standard screws and bases; this reduces set‑up time and ensures repeatable clamping for batch production. Application guidance and process benefits for turning steel As a finishing grade, the NS9530 composition excels in continuous cuts and small depths of cut, where the priority is surface quality and low cutting forces rather than heavy material removal. The double‑sided chipbreaker supports consistent chip control in light turning operations and enables economical use of the indexable insert by allowing both sides to be used. For users seeking process stability and predictable component finish, this solution offers a practical balance between edge sharpness and wear life, helping to shorten non‑productive times and increase yield on finished parts. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss the best holder combination for Tungaloy CNMG120404 NS9530 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998260 Manufacturer SKU: TUN6998260 SKU: 6998260-Tungaloy Designation: CNMG120404 NS9530 Model series: ISO‑Drehwendeschneidplatten Facts Size: 12 Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 80° Rake (relief) angle: 0° Special features Cutting material: uncoated cermet NS9530 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: external and internal turning FAQ What types of turning operations suit this insert best? The CNMG120404 NS9530 insert is optimised for finishing passes in external and internal turning, particularly where a fine surface finish on steel is required. Is the insert compatible with standard CNMG holders? Yes, the ISO CNMG120404 geometry ensures compatibility with standard CNMG external holders and boring bars, provided matching size, thickness and clamp arrangement. Can the NS9530 grade be used for interrupted cuts? NS9530 is a finishing‑orientated cermet best used for continuous cuts and small depths of cut; for heavily interrupted machining a tougher grade is usually advisable. How many usable edges does the insert offer? The rhombic CNMG form with a double‑sided chipbreaker provides multiple indexable edges per insert, enabling economical edge changes and extended tool utilisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
The combination of a sharp, uncoated cermet cutting edge and a small corner radius ensures excellent surface finish and low cutting forces; its ISO rhombic form permits straightforward integration into standard toolholders. Order the CNMG120404 NS9530 insert directly via Metav Werkzeuge or consult the technical advisers for holder matching and process optimisation. CNMG120404 NS9530 CNMG Turning Insert — Tungaloy — Uncoated cermet, 0.4 mm radius A CNMG120404 NS9530 turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and ISO‑compatible rhombic geometry for reliable external and internal turning. ISO‑standard rhombic insert, 80° approach angle Uncoated cermet NS9530 for fine finishing 0.4 mm corner radius for precise edge control Achieve consistently high surface quality with a finishing grade insert The uncoated NS9530 cermet grade is formulated for finishing steel where a sharp cutting edge and low cutting forces are decisive. Cermet combines ceramic hardness with metal toughness, which reduces flank wear during continuous cuts and supports a stable process when small depths of cut are specified. This results in a finer surface finish and reduced need for rework, making the insert particularly suitable for components requiring tight dimensional and aesthetic standards. Simple mounting and ISO interchangeability cut setup time The insert follows the ISO rhombic designation and is produced to the CNMG120404 contour, so compatibility is determined by form, clearance angle, tolerance class, fixation method, size and thickness. The geometry features an 80° approach angle, a 0° clearance angle and a cylindrical central hole, enabling secure clamping in standard CNMG holders or on a compatible boring bar. The system is intended to be used with a matching external holder, shim/clamping set and replacement screws, which are specified separately for a complete toolset. Productivity gains from controlled chip formation and tool life A double‑sided chipbreaker and the fine 0.4 mm corner radius support controlled chip formation and stable cutting forces during finishing passes. The combination of grade and geometry reduces the likelihood of edge chipping under continuous cutting conditions and helps to maintain repeatable dimensional accuracy across batches. For workshops aiming to increase throughput without compromising finish, this turning grade provides an economical balance of performance and handling simplicity. Contact Metav Werkzeuge for technical matching and order support for the Tungaloy NS9530 finishing inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6735853 Manufacturer SKU: TUN6735853 Vendor SKU: 6735853-Tungaloy Designation: CNMG120404 NS9530 Model series: ISO turning inserts Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 80° Clearance angle: 0° Hole: cylindrical Chipbreaker: double‑sided Materials & features Cutting grade: NS9530 (uncoated cermet) Substrate: cemented carbide Plate form: rhombic (CNMG) Application: turning (external and internal) System components: insert, compatible external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert intended for? The NS9530 grade is a finishing cermet developed for machining steel; it delivers a sharp edge and low cutting forces suited to continuous finishing cuts. Is the CNMG120404 insert double‑sided and reversible? Yes, the CNMG120404 geometry is double‑sided with a double‑sided chipbreaker, allowing the indexation of a fresh cutting edge when required. Which holder types are compatible with this insert? Compatibility is based on ISO form, clearance angle and size; the CNMG120404 insert is intended for standard CNMG holders or compatible boring bars designed for rhombic inserts. Does the insert require a specific clamping set or screws? A matching shim/clamping set and replacement screws form part of the overall system and should be selected to match the insert’s cylindrical hole and tolerance class. How does the 0.4 mm corner radius affect the machining result? A 0.4 mm radius provides controlled edge strength for finishing operations, improving surface quality while keeping radial cutting forces moderate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the ISO CNMG geometry for reliable, high-surface-quality turning. Benefit from the low cutting forces of an uncoated cermet substrate and a double-sided chipbreaker to keep production stable. Order the CNMG120404 NS9530 insert directly via Metav Werkzeuge or ask our consultants for application advice. CNMG 120404 NS9530 Tungaloy indexable insert for turning, finishing in steel The CNMG120404 NS9530 Tungaloy insert is an ISO-standard, rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and a geometry suited to continuous cuts and small depths of cut. Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces ISO CNMG120404 shape with 80° geometry Double-sided chipbreaker with cylindrical hole Exceptional surface quality through a finishing cermet The uncoated cermet NS9530 is optimised for finishing cuts on steel, delivering a high surface finish with reduced cutting forces. The sharp edge geometry and low cutting resistance minimise vibration and thermal loading, which helps to produce consistent component appearance and tighter tolerances. For applications with continuous cutting and small depths of cut, this substrate provides improved stability compared with general-purpose grades and supports longer intervals between part rework. Plug-and-play integration into ISO tooling systems The CNMG format follows ISO standards, making compatibility dependent on insert form, 0° relief angle, tolerance class, clamping and thickness. The rhombic, 80° lead shape and the 4.76 mm plate thickness require a matching external holder or boring bar, plus the appropriate shim/clamping set and replacement screws. These system elements ensure accurate positioning and repeatable indexation, so the insert can be integrated into existing turning toolholders without extensive modification to the tooling system. Economical finishing with controlled chip formation Equipped with a double-sided chipbreaker, the insert supports manageable chip control during finishing, particularly on steels where continuous chips are expected. The combination of a stable cutting edge and the cermet substrate reduces cutting forces and can enhance tool life in steady-state finishing operations. This makes the insert a cost-effective choice where consistent part quality and predictable machining behaviour are priorities, especially in series production and precision workshops. For high-precision finishing on steel, contact Metav Werkzeuge to order the Tungaloy CNMG120404 NS9530 insert or to request tailored application advice from our technical consultants. Technical Data Article number: 6944532 Manufacturer SKU: TUN6944532 SKU: 6944532-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Data Corner radius: 0.4 mm Lead/approach angle: 80° Relief (free) angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Uncoated cermet grade NS9530 Rhombic plate form (CNMG) Double-sided chipbreaker With cylindrical hole for secure clamping ISO-standard turning insert, suited for finishing steel System: ISO insert + external holder/boring bar + shim/clamping set + replacement screws FAQ What applications is this insert best suited for? The CNMG120404 NS9530 insert is intended for finishing on steel; the uncoated cermet substrate and sharp cutting edge favour continuous cutting and small depths of cut for superior surface quality. How does the chipbreaker affect performance? The double-sided chipbreaker on the CNMG120404 NS9530 promotes controlled chip formation in finishing operations, improving surface consistency and reducing the risk of entangling chips. Is this insert compatible with existing ISO toolholders? Compatibility depends on holder form, clamping method, tolerance class and the 4.76 mm plate thickness; the insert is ISO-standard, so matching external holders or boring bars and appropriate clamping sets are required. Which materials can be machined with this grade? The NS9530 cermet grade is optimised for machining steel in finishing operations, providing low cutting forces and good surface quality under continuous cutting conditions. What is the article and manufacturer reference for ordering? Order reference: Article number 6944532 (SKU 6944532-Tungaloy); the manufacturer SKU is TUN6944532 for Tungaloy products. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T505 Wendeplatten - Tungaloy
The combination of CVD-coated carbide, a double-sided chipbreaker and ISO‑compatibility ensures efficient, economical turning of cast iron with predictable tool life; order supply or request advice via Metav Werkzeuge for seamless integration into existing tool systems. CNMG120404 T505 – ISO turning insert (CVD-coated carbide) by Tungaloy The CNMG120404 T505 is an ISO‑standard indexable turning insert optimised for economical machining of cast iron in external and internal turning operations. CVD-coated carbide grade T505 Optimised for cast iron machining Double-sided chipbreaker for stability ISO CNMG 120404 rhombic insert Consistent, economical cutting for cast iron The CVD‑coated carbide grade T505 delivers a balanced combination of wear resistance and toughness, making it well suited to the economic machining of cast iron. The coating reduces flank wear under continuous cutting conditions, while the substrate provides the necessary edge stability for operations with moderate to variable cutting parameters. For workshops seeking repeatable component quality and reduced regrind cycles, this specification supports longer intervals between insert changes and contributes to lower overall machining costs. Precise geometry for reliable holder compatibility The insert follows the ISO CNMG 120404 geometry and is produced in a rhomboid form with a 0.4 mm corner radius and a 4.76 mm thickness, including a cylindrical hole for secure mounting. Compatibility with a turning holder depends on form, relief angle, tolerance class, fastening and size; matching these factors ensures correct seating, consistent chip evacuation and stable cutting forces. The nominal relief angle of 0° and an included angle of 80° make the insert appropriate for a broad range of standard CNMG holders. Stable chip control and flexible tool economy A double-sided chipbreaker design provides two usable orientations before indexing, effectively doubling the functional edges compared with a single‑sided layout and improving cost efficiency. The chipbreaker geometry assists in fragmenting chips when machining interrupted cuts or variable sections typical of cast components, reducing the risk of surface damage and enhancing process reliability. For production environments that value predictable cycle times and simple tool logistics, this insert supports both roughing and medium finishing passes when paired with an appropriate grade and cutting data. Application guidance and system composition The insert is intended for turning (external and internal) as part of a complete system comprising the ISO insert, a compatible external holder or boring bar, and the necessary clamping hardware and screws. Selecting the correct chipbreaker and grade—here T505—should be guided by component stability, the presence of interrupted cuts and the desired cutting speed. When set up correctly, the combination of ISO standardisation, robust clamping and the coated carbide substrate delivers consistent surface quality and repeatable results. For supply, technical matching or to discuss the CNMG120404 T505 application in existing tool systems, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and fast delivery. Technical data Article number: 6831233 Manufacturer SKU: TUN6831233 Model series: ISO‑turning indexable inserts Material: carbide Facts Insert designation: CNMG120404 Grade / coating: T505 (CVD‑coated) Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 80° Special features Rhomboid (CNMG) insert shape Cylindrical hole for fastening Double‑sided chipbreaker ISO‑standard geometry for holder compatibility Suited for cast iron machining Intended for external and internal turning FAQ Which materials is this insert designed for? The CNMG120404 T505 insert is specified for economical machining of cast iron; the T505 CVD‑coated carbide supports stable cutting and wear resistance in these materials. Is this insert compatible with standard CNMG holders? Compatibility requires matching form, relief angle, tolerance class, fastening, size and thickness; the CNMG120404 designation and the 4.76 mm thickness align with standard CNMG holder requirements when these parameters are observed. How does the double‑sided chipbreaker affect tool economy? The double‑sided chipbreaker allows indexing to a fresh orientation, effectively extending useful life per insert and improving cost efficiency compared with single‑sided variants. What cutting applications suit the 0.4 mm corner radius? A 0.4 mm radius offers a compromise between edge strength and surface finish, making it suitable for general turning where moderate finishing and robust edge performance are required. Can the insert be used for interrupted cuts? The coated substrate and chipbreaker design of the CNMG120404 T505 help manage interrupted cutting conditions; selection should consider component stability and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 T505 Wendeplatten - Tungaloy
Take advantage of the combination of economical cutting performance, a CVD-coated T505 grade and secure geometry for consistent cast-iron turning; order the CNMG120404 T505 insert via Metav Werkzeuge or consult our specialists for process optimisation. CNMG120404 T505 — ISO rhombic indexable turning insert, CVD-coated carbide by Tungaloy CNMG120404 T505 is a rhombic indexable turning insert optimised for efficient external and internal turning, especially for cast-iron applications, delivering repeatable edge life and stable chip control. ISO rhombic insert CNMG120404 form CVD-coated carbide grade T505 for cast iron Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 80° cutting angle Efficient cast-iron turning with reproducible edge life The CVD coating and the T505 grade carbide combine to create a wear-resistant cutting edge that is suited to economic machining of cast iron. The coating reduces flank and crater wear under typical interrupted and continuous cuts, which results in longer in-cycle life and fewer insert changes. Thanks to the double-sided chipbreaker, chips are segmented reliably, reducing the risk of chip-related surface damage and promoting safer, unattended operation. Secure geometry and reliable clamping for process stability The rhombic CNMG form with a cylindrical hole and standard ISO datum ensures consistent seating and repeatable positioning in ISO-compatible holders. The 80° cutting angle and 0.4 mm corner radius balance strength and edge sharpness, enabling stable cutting forces and predictable tool deflection. This geometry supports standard clamping systems and simplifies tool inventory by using well-known ISO specifications for holders, clamp sets and replacement screws. Productivity gains from focused tool design Designed for production contexts, the combination of CVD-coated surface and precise grade selection delivers a favourable cost-per-part ratio for turning operations. The plate thickness and form contribute to secure mounting and higher allowable feed rates under appropriate rigidity; in practice this means faster cycle times without sacrificing surface integrity. For workshops seeking consistent throughput, this insert supports efficient changeover and repeatable results across series production. Compatibility, system setup and application advice The insert is supplied in the ISO indexable turning insert system and pairs with matching external holders or boring bars; compatibility depends on form, clearance angle, tolerance class, attachment and plate dimensions. As a turning solution, selection of the correct chipbreaker and grade for workpiece stability and cutting conditions is essential — the T505 grade suits a broad range of cast-iron types and cutting strategies. For mixed-material shops, consider toolholder rigidity and cutting data adjustments when moving between cast iron and other materials. For reliable, economical cast-iron turning choose the Tungaloy CNMG120404 T505 insert — contact Metav Werkzeuge for tailored application support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6831203 Manufacturer SKU: TUN6831203 Manufacturer: Tungaloy Product designation: CNMG120404 T505 Tungaloy insert Model series: ISO indexable turning inserts Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 80° Special features Material: carbide Coating / grade: CVD-coated, T505 Chipbreaker: double-sided Hole: with cylindrical hole Shape: rhombic (CNMG) Application: turning, recommended for cast iron System compatibility: ISO‑standard plates and holders FAQ What materials is this insert designed for? The CNMG120404 T505 insert is designed primarily for machining cast iron; the T505 CVD-coated carbide grade provides good wear resistance and chip control on these materials. Which chip control solution is integrated on the insert? This insert features a double-sided chipbreaker, which supports reliable chip segmentation and smoother evacuation in turning operations. How does the insert mount to a holder? Mounting depends on ISO-compatible seat form and the insert’s cylindrical hole; the rhombic form and standard tolerances ensure repeatable seating in ISO turning holders and boring bars. What are the key geometry parameters to consider for machining setup? Key parameters include the 80° cutting angle, 0.4 mm corner radius and 4.76 mm plate thickness; these influence edge strength, surface finish and allowable feed rates. Is this insert suitable for interrupted cuts? Yes — the grade and geometry of the insert are selected for stable performance in both continuous and interrupted turning, provided suitable holder rigidity and cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T5105 Wendeplatten - Tungaloy
Benefit from the T5105 CVD‑coated cemented carbide and ISO CNMG geometry for dependable high‑speed turning of cast iron; the rhombic 80° form and secure hole clamping support consistent process stability. Order genuine inserts via Metav Werkzeuge or consult the team for application advice. CNMG 120404 T5105 indexable insert for turning by Tungaloy — CVD‑coated carbide, rhombic 80° CNMG 120404 T5105 is an indexable turning insert designed for high‑speed machining of cast iron under stable conditions, offering a wear‑resistant CVD coating and proven geometry for reliable cycle times ISO CNMG 120404 geometry CVD‑coated T5105 carbide grade Double‑sided chipbreaker for versatility Rhombic 80° shape with cylindrical hole Consistent high‑speed performance for cast iron turning The insert combines a CVD‑coated cemented carbide substrate with the T5105 grade to provide enhanced abrasion resistance during high‑speed turning of cast iron. The coating reduces flank wear and maintains cutting edge integrity for longer intervals between index changes, which translates into more predictable tool life and fewer unplanned interruptions. By favouring a wear‑resistant grade in stable clamping and machining conditions, production runs achieve improved surface consistency and a reduction in finishing passes. Precise geometry and secure clamping reduce vibration The ISO CNMG 120404 geometry, with a rhombic 80° shape and a cylindrical hole, is designed to deliver stable engagement and reliable seat location in appropriate external holders or boring bars. The 4.76 mm plate thickness and 0° clearance angle support robust cutting forces while the 0.4 mm corner radius smooths transitions on profiles. A cylindrical hole helps centre the insert and improves repeatability during index changes, lowering the risk of micro‑vibrations that impair surface finish and dimensional accuracy. Chip control and reversible edge for cost‑effective production A double‑sided chipbreaker provides two usable cutting edges per side, allowing reversible use to maximise economy. The chipbreaker geometry aids controlled chip formation when turning cast iron, reducing the frequency of manual chip clearing and improving coolant access. Reversible inserts cut tooling expenditure per component and simplify inventory management, while consistent chip control contributes to safer, more efficient automated machining. Practical selection advice and easy integration into existing systems Select the chipbreaker and grade according to the workpiece material, machining strategy and machine stability; the T5105 grade is optimised for cast iron under stable conditions and high cutting speeds. The insert integrates into standard ISO turning systems—install the insert with the matching shim, clamp set and screws to ensure correct seating. For operations requiring different materials or interrupted cuts, consider alternative grades or chipbreaker designs to maintain process reliability and surface quality. Contact Metav Werkzeuge for tailored application advice and to secure genuine Tungaloy CNMG 120404 T5105 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850120 Manufacturer SKU: TUN6850120 SKU: 6850120-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: CNMG120404 Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 80° Clearance angle: 0° Hole: with hole, cylindrical hole Special features Material: CVD‑coated cemented carbide T5105 Double‑sided chipbreaker Rhombic 80° shape Reversible cutting edges Suitable for high‑speed cast iron turning Compatible with ISO external holders and boring bars FAQ What materials is this insert optimised for? The CNMG 120404 T5105 insert is optimised for high‑speed machining of cast iron; the T5105 CVD‑coated cemented carbide provides abrasion resistance suited to that material class. Is the insert reversible and how many cutting edges are available? Yes — the insert features a double‑sided chipbreaker, giving multiple reversible cutting edges per insert to improve economy and reduce tooling changes. How does the cylindrical hole affect clamping and repeatability? A cylindrical hole improves centring and clamping stability in compatible holders, which enhances repeatability and reduces the likelihood of micro‑vibration during turning operations. Can this insert be used for interrupted cuts or unstable set‑ups? The CNMG 120404 T5105 is designed for stable conditions; for heavily interrupted cuts or less rigid setups a different grade or chipbreaker geometry may be more appropriate. Which holders are compatible with this ISO geometry? Compatibility is determined by the insert form, clearance angle, tolerance class, attachment method, size and thickness; matching holders and shims designed for ISO CNMG geometry should be used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 T5105 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T5105 and a stable rhombic 80° geometry for productive, high-speed turning of cast iron; order the insert directly via Metav Werkzeuge or request advice from the consultants. CNMG120404 T5105 — Turning insert (CVD-coated carbide, rhombic 80°) by Tungaloy The CNMG120404 T5105 is an ISO rhombic turning insert engineered for high-speed machining of cast iron under stable cutting conditions. CVD-coated carbide grade T5105 for high-speed cutting Rhombic 80° geometry, 0° clearance angle Double-sided insert with cylindrical hole Ideal for stable cast iron turning operations Productive high‑speed cutting with durable CVD coating The insert uses a CVD-coated carbide substrate in grade T5105, designed specifically to extend tool life during aggressive turning operations on cast iron. The CVD (chemical vapour deposition) coating forms a hard, wear‑resistant surface layer that reduces flank wear and improves thermal resistance at elevated cutting speeds. For production environments this translates into longer intervals between indexings and fewer tool changes, which helps maintain a smoother production flow and higher uptime. The wear characteristics of the grade mean cutting parameters can be pushed toward higher speeds while preserving surface quality. Geometry and clamping that deliver consistent chip control The rhombic CNMG shape with an 80° main cutting angle and a 0° relief provides a stable cutting edge for a range of turning tasks. The insert is double‑sided, offering two usable cutting edges per side, and features a cylindrical centre hole for secure locating and clamping in standard ISO holders. The 0.4 mm corner radius balances edge strength and surface finish; a larger radius increases robustness, while a smaller radius supports finer surface quality. The insert thickness of 4.76 mm contributes to rigidity in the tool system, reducing vibration and promoting consistent chip formation under stable set‑ups. System compatibility and practical selection guidance Compatibility with a selected holder is determined by shape, clearance angle, tolerance class, mounting method, size and thickness; these parameters ensure correct seating and repeatability. The typical system comprises the ISO insert, a matching external holder or boring bar, an underlay shim or clamping kit and the securing screws. For cast iron turning choose the appropriate chipbreaker type and the T5105 grade when process stability and wear resistance are priorities. Technical drawings or holder specifications should be consulted to confirm match in form and dimensions before assembly. If further technical data is needed, Metav Werkzeuge provides detailed guidance and material‑specific recommendations. For high‑speed cast iron turning, request technical advice or place an order for the CNMG120404 T5105 insert through Metav Werkzeuge; contact details are available from Metav Werkzeuge for fast consultation and supply. Technical data Article number: 6850115 Manufacturer SKU: TUN6850115 SKU: 6850115-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Main cutting angle: 80° Features and applications CVD-coated carbide grade T5105 Double-sided insert Cylindrical centre hole Rhombic CNMG form Suitable for external and internal turning Typical setup: insert, external holder or boring bar, shim/clamping set, spare screws Compatibility determined by form, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert intended for? The CNMG120404 T5105 insert by Tungaloy is optimised for high‑speed machining of cast iron under stable cutting conditions. What does the T5105 designation indicate? T5105 identifies the carbide grade and coating specification; it denotes a CVD‑coated carbide developed for wear resistance and thermal stability in high‑speed applications. What is meant by CNMG120404? CNMG120404 denotes the insert shape (CNMG), ISO size (12), thickness (4.76 mm) and corner radius (0.4 mm) — the ISO code 120404 corresponds to these geometric parameters. Is the insert reversible and how many cutting edges are available? Yes; the insert is double‑sided, providing multiple indexable cutting edges and a cost‑effective edge‑usage cycle. How to ensure compatibility with a holder? Compatibility depends on the insert form, clearance angle, tolerance class, mounting style, size and thickness; matching these dimensions with the holder specification ensures secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 T5105 Wendeplatten - Tungaloy
Take advantage of the durable CVD-coated T5105 carbide, the ISO CNMG120404 geometry with an 80° included angle, and the double-sided chipbreaker for steady, high-speed turning of cast iron; order via Metav Werkzeuge or consult our specialists for application advice. CNMG 120404 T5105 Tungaloy turning insert A CNMG120404 T5105 ISO turning insert designed for high-speed, wear-resistant machining of cast iron under stable conditions. CVD-coated carbide T5105 for high-speed turning ISO CNMG120404 rhombic 80° geometry Double-sided chipbreaker for consistent chip control Increase throughput with a wear-resistant coating The CVD-coated T5105 grade provides improved surface hardness and thermal stability, which translates into longer life during demanding cutting operations. For machining cast iron, this coating reduces flank wear and preserves the cutting edge at elevated speeds. By selecting a carbide insert with this specification, process windows can be expanded, enabling higher cutting speeds without sacrificing predictable tool life. The result is fewer interruptions for index changes and a measurable rise in production uptime. Consistent chip formation for safer machining A double-sided chipbreaker ensures repeatable chip geometry and reliable evacuation in turning operations, which lowers the risk of chatter and tool damage. The insert’s cylindrical centre hole and standard fixation method contribute to stable clamping in compatible holders, maintaining the position under load. Consistent chips improve surface finish and reduce secondary handling, so cycle times and downstream inspection requirements are reduced while part quality remains stable. Seamless integration into ISO tool systems The rhombic ISO CNMG120404 form with an 80° included angle and 0° clearance fits a wide range of standard CNMG holders; compatibility is governed by form, free angle, tolerance class, fixation and thickness. Dimensionally the insert features a 4.76 mm thickness, an inscribed circle of 12 mm and a 0.4 mm nose radius, facilitating precise profiling and repeatable set-up across machines. This conformity allows straightforward replacement and interchangeability in established tooling systems without custom adaptors. Practical efficiency for workshop operations The insert’s geometry and material combination target stable turning conditions where predictable performance is critical. The indexable insert concept, combined with a robust carbide substrate, reduces inventory complexity by offering standardised parts that can be rotated or replaced with minimal downtime. For operations aiming to balance cycle speed and surface integrity, this solution contributes to lower tooling costs per component and a more consistent production output. Contact Metav Werkzeuge for tailored advice on the CNMG120404 T5105 Tungaloy turning insert and to arrange delivery or a specification check via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852904 Manufacturer SKU: TUN6852904 Manufacturer: Tungaloy Numbers / Core technical data Radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 12 mm Included angle: 80° Clearance angle: 0° Special features / Designs CVD-coated carbide (T5105) Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical centre hole ISO CNMG120404 designation Application: Turning (external and internal) FAQ What materials is this insert best suited for? The CNMG120404 T5105 insert is optimised for cast iron machining, where the CVD-coated T5105 grade provides wear resistance for high-speed turning. How does the chipbreaker influence machining? The double-sided chipbreaker on this indexable insert promotes repeatable chip shapes, improving evacuation and surface finish while reducing the likelihood of chip-related interruptions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fixation and insert thickness; the CNMG120404 geometry fits standard CNMG holders designed for 80° rhombic inserts. How many usable cutting edges are available? The double-sided design extends service life through indexing; the exact number of edges accessible depends on the specific CNMG variant and indexing procedure used. What are the key dimensional data for set-up? Important set-up dimensions include a 0.4 mm nose radius, 4.76 mm thickness, 12 mm inscribed circle, 80° included angle and 0° clearance angle, which helps ensure correct seating and orientation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide T5105, ISO CNMG geometry and a 0.4 mm nose radius for stable, high-speed turning of cast iron components; order this indexable insert via Metav Werkzeuge or request advice from the consultants at Metav Werkzeuge for optimal holder selection. CNMG 120404 T5105 turning insert, Tungaloy — CVD-coated cemented carbide for cast iron CNMG120404 T5105 is an ISO-format, rhombic indexable insert intended for turning applications with a focus on high-speed, wear-resistant machining of cast iron under stable conditions ISO CNMG geometry, 80° lead angle CVD-coated cemented carbide grade T5105 0.4 mm nose radius for stable cuts Double-sided chipbreaker, cylindrical hole High-speed efficiency with wear-resistant coating The insert is manufactured from cemented carbide and finished with a CVD-coated surface in grade T5105, a combination designed to extend tool life during aggressive cutting. This coating improves resistance to abrasive wear and thermal loading, which translates into longer intervals between indexings and fewer unscheduled tool changes. For operations where material removal rates and process reliability matter, the combination of coating and substrate delivers measurable increases in machining uptime. Consistent geometry for secure clamping and predictable results Produced to ISO CNMG standards, the insert's geometry ensures compatibility with holders that match the form, relief angle, tolerance class, fastening and thickness. The rhombic shape and 80° lead provide a robust cutting orientation for external and internal turning, while the cylindrical hole enables reliable screw clamping. Defined geometric parameters reduce setup variability and promote repeatable surface finish and dimensional control across series production. Designed spec for stable cutting and easy integration Key dimensional characteristics such as the 0.4 mm nose radius and 4.76 mm thickness support stable chip formation when the appropriate double-sided chipbreaker is selected for the workpiece and cutting conditions. The insert's layout permits cost-efficient use thanks to its reversible design, and the clearly defined relief angle of 0° supports consistent cutting behaviour in stable setups. Where finishing and consistent edge life are priorities, this insert provides a balance between edge strength and the ability to produce controlled chip flow. Contact Metav Werkzeuge for tailored advice on holder matching and application parameters when specifying this Tungaloy CNMG 120404 T5105 insert; reach Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and procurement Technical data Manufacturer article number: 6850117 SKU: 6850117-Tungaloy Manufacturer SKU: TUN6850117 Facts Nose radius: 0.4 mm Thickness: 4.76 mm Inscribed circle (I.C.): 12 mm Lead angle: 80° Relief angle: 0° Design & special features Rhombic insert shape CNMG CVD-coated cemented carbide, grade T5105 Double-sided chipbreaker Cylindrical hole for screw clamping ISO-formatted indexable insert for turning Suitable for high-speed machining of cast iron under stable conditions FAQ What materials is this insert suitable for? The CNMG120404 T5105 insert is specified for high-speed machining of cast iron; the T5105 grade supports wear resistance under stable cutting conditions. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole and the matching screw system; compatibility requires a holder that conforms to ISO CNMG form, size and tolerance specifications. What does the CNMG120404 designation indicate? The designation denotes the rhombic ISO CNMG geometry with a 12 mm inscribed circle and a 0.4 mm nose radius as given in the item code. Is the chipbreaker reversible and what is its benefit? The insert features a double-sided chipbreaker, enabling reversible use of cutting edges and improved chip control when the breaker is matched to the workpiece and process stability. Which geometric parameters should be checked for holder selection? Verify form, relief (0° in this case), tolerance class, fastening method, size (12 mm I.C.) and thickness (4.76 mm) to ensure correct seating and predictable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5115 carbide grade and the double-sided chipbreaker for consistent chip control and stable cutting. The combination of ISO conformity, precise dimensions and a 0.4 mm corner radius supports secure clamping and repeatable performance on cast iron workpieces. Order directly via Metav Werkzeuge or request guidance from our consultants for holder compatibility and application advice. CNMG120404 T5115 — ISO turning insert by Tungaloy, rhombic 80° geometry CNMG120404 T5115 is an ISO rhombic turning insert designed for external and internal turning, optimised for cast iron applications and reliable production use ISO rhombic insert CNMG 120404 CVD-coated carbide grade T5115 Double-sided chipbreaker for chip control 12 mm inscribed circle, 0.4 mm radius Stable chip control and predictable wear for cast iron machining The combination of a CVD-coated surface and the T5115 grade provides a predictable balance between wear resistance and edge stability, particularly when machining cast iron. The integrated double-sided chipbreaker reduces the risk of long, entangling chips and supports consistent chip segmentation, which in turn promotes uninterrupted cycle times and reduced secondary operations. This leads to measurable improvements in process reliability and lower scrap rates in batch production. Precisely defined dimensions for secure clamping and repeatability The insert follows ISO geometry with a 12 mm inscribed circle and a plate thickness of 4.76 mm, ensuring compatibility with standard CNMG holders. The 0.4 mm corner radius and 0° rake angle contribute to a robust cutting edge that tolerates moderate interruptions while delivering repeatable results. The 80° approach geometry supports stable cutting forces and predictable tool life, making the component well suited to series turning where tool-change consistency matters. Application versatility and efficient tool usage As a universal grade for cast iron, this insert adapts to a wide range of turning tasks — from finishing to light roughing — when paired with an appropriate holder and cutting parameters. The carbide substrate combined with the CVD coating reduces flank and crater wear, helping to extend indexable tool life and lower tooling costs per component. Selection of the matching chipbreaker and grade should reflect the chosen cutting speed, feed and workpiece stability to unlock the full efficiency potential. System compatibility and practical handling notes Compatibility with clamping systems depends on insert form, free angle, tolerance class, fastening method, size and thickness; ensure the selected CNMG holder matches these parameters. The insert is supplied with a central hole in a cylindrical style for secure fixation. When replacing or setting up the tool, verify torque and seating surfaces to avoid micro-movements that can affect surface finish and tool life. For new applications, trial cuts under controlled conditions are recommended to define stable parameters. Contact Metav Werkzeuge for tailored application support on the Tungaloy T5115 inserts and assistance with holder compatibility and batch selection Technical data Article number: 6850118 Manufacturer SKU: TUN6850118 Seller SKU: 6850118-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Rake angle: 0° Geometry angle: 80° Features Material: Hartmetall Grade: T5115 (CVD-coated) Shape: rhombic (CNMG) Hole: with hole, cylindrical hole Chipbreaker: double-sided FAQ What materials is this insert suited for? The T5115 grade and CVD-coated carbide substrate are specified for machining cast iron; the CNMG120404 geometry supports a wide range of turning operations on such materials. How does the chipbreaker design affect performance? The double-sided chipbreaker on this indexable insert promotes controlled chip formation and reduced chip length, improving process stability during continuous turning cycles. Which dimensions ensure compatibility with standard holders? Key dimensions are a 12 mm inscribed circle and 4.76 mm thickness; these ISO values ensure compatibility with matching CNMG holders when form, free angle and fastening are correctly matched. Is the insert reversible or single-use? The insert is double-sided and can be indexed to present a fresh cutting edge, extending effective tool life before disposal. What should be checked when mounting the insert? Ensure correct seating, clean contact faces, proper clamping torque and use of the specified screw and clamp to maintain repeatability and avoid micro-movements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of proven CVD‑coated carbide wear resistance, a double‑sided chipbreaker for reliable chip control, and ISO compatibility for straightforward holder selection — all contributing to uninterrupted turning operations. Order the original Tungaloy insert directly via Metav Werkzeuge or contact the consultants for tailored holder and cutting‑data advice. CNMG 120404 T5115 — ISO turning insert (rhombic, CVD‑coated carbide) by Tungaloy The CNMG120404 T5115 is an ISO‑standard rhombic indexable insert engineered for external and internal turning, optimised as a universal grade for cast iron machining. CVD‑coated carbide for wear resistance Double‑sided chipbreaker for consistent chip control Rhombic 80° geometry for versatile turning Cylindrical hole for secure clamping Durable, wear‑resistant grade for dependable productivity The insert’s CVD‑coated carbide construction and grade T5115 deliver a balanced combination of wear resistance and edge stability, designed specifically for machining cast iron. The CVD coating forms a hard, heat‑resistant layer that reduces flank and crater wear during heavy cuts; this translates into longer tool life and fewer indexings or insert changes. For production environments where tool change frequency impacts throughput, the result is a measurable improvement in process continuity and reduced downtime. The double‑sided chipbreaker further aids repeatable chip formation, supporting consistent surface quality even under varying feed conditions. Geometry and clamping that ensure predictable surface quality The rhombic plate shape with an 80° included angle and a 0.4 mm corner radius combines strength at the cutting edge with the option for finer surface finishes. A larger corner radius increases edge robustness for roughing passes, while the specified radius supports a controlled contact zone for finishing. The insert’s 4.76 mm thickness and cylindrical hole enable secure seating in ISO‑compatible holders, improving repeatability and minimising vibration. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct holder and clamp ensures the mechanical stability required for predictable component tolerances. System benefits: integration, handling and process guidance Delivered as part of a classic ISO insert system — insert, appropriate external holder or boring bar, shim/clip and fixing screw — this solution simplifies tool inventory and reduces setup complexity. The reversible, indexable design offers multiple cutting edges per insert, lowering cost per cutting edge and supporting leaner tool logistics. For customers seeking quick integration into existing toolrooms, Metav Werkzeuge can advise on matching holders, clamping sets and replacement screws. The overall effect is improved process reliability and easier standardisation across turning applications. For application‑specific recommendations on holders and cutting data for the Tungaloy CNMG120404 T5115 insert, contact Metav Werkzeuge — expert advice and rapid availability ensure the right insert setup for cast‑iron turning tasks Technical data Article number: 6850116 Manufacturer SKU: TUN6850116 SKU: 6850116-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade/coating: T5115 (CVD‑coated) Application: turning Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Rhombic plate form ISO‑standard insert Double‑sided chipbreaker Universal grade for cast iron Indexable, reversible design Secure clamping via cylindrical hole FAQ What materials is this insert intended for? The CNMG120404 T5115 insert is a universal grade optimised for cast iron; the T5115 composition balances wear resistance and edge stability for typical grey and nodular cast‑iron turning tasks. Is the insert compatible with standard ISO holders? Compatibility is ISO‑based: form, relief angle (0°), tolerance class, fastening method, size (12 mm) and thickness (4.76 mm) determine fit — choose an ISO‑compatible holder that matches these parameters for secure clamping. How does the chipbreaker affect machining? The double‑sided chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the risk of chip‑related interruptions during long turning cycles. Can both sides of the insert be used? Yes. The indexable, reversible design and double‑sided chipbreaker allow multiple cutting edges per insert, which reduces tooling costs and extends usable life before replacement. Where to get holder and cutting‑data recommendations? For holder selection and cutting‑data tailored to specific machines and cast‑iron grades, Metav Werkzeuge can provide application guidance and compatible clamping solutions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120404 T5115 Wendeplatten - Tungaloy
Combine wear resistance and edge stability with ISO compatibility to maintain efficient turning cycles and consistent surface quality; the balanced T5115 grade ensures long tool life in cast‑iron machining. Order the inserts directly via Metav Werkzeuge or consult the team for selection and clamping advice. CNMG120404 T5115 – ISO turning insert for external and internal turning, Tungaloy The CNMG120404 T5115 is an ISO‑standard rhombic turning insert designed for general‑purpose external and internal turning, featuring a cylindrical hole for secure clamping and a robust CVD‑coated carbide grade. CVD‑coated carbide grade T5115 Rhombic CNMG shape, 80° cutting angle 0.4 mm corner radius for precision finishing Double‑sided chipbreaker with cylindrical hole High productivity through a balanced carbide grade The CVD‑coated T5115 carbide combines wear resistance and cutting‑edge stability, providing a reliable compromise between lifetime and edge strength when machining cast iron. As a universal grade, it supports a wide range of cast‑iron alloys and stabilises chip formation under varying cutting conditions. The result is fewer tool changes and predictable tool behaviour, which contributes directly to improved machining throughput and lower per‑part tooling costs. Precise geometry for consistent surface quality With its rhombic CNMG form and an 80° cutting angle, the insert delivers stable engagement and repeatable cutting forces for both external and internal turning. The 0.4 mm corner radius improves surface finish while still allowing controlled material removal; the double‑sided chipbreaker supports efficient chip control across moderate feeds. The cylindrical hole ensures secure clamping in ISO‑standard holders, reducing vibration and helping to maintain a consistent finish on the workpiece. Process security and practical handling in the workshop The insert’s ISO conformity simplifies tool selection and replacement within established tool systems, so holders and clamping sets can be chosen according to form, relief angle and tolerance class. The indexable design means two cutting edges per side are available, enhancing cost efficiency by extending usable life before replacement. For production environments seeking stable, repeatable turning of cast iron, this solution supports reduced downtime and easier inventory management while maintaining machining accuracy. For reliable cast‑iron turning with Tungaloy quality, contact Metav Werkzeuge to specify CNMG120404 T5115 inserts for the intended holder and application — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852905 Manufacturer item no.: 6852905 Manufacturer SKU: TUN6852905 SKU: 6852905-Tungaloy Brand: Tungaloy Facts Model series: ISO turning indexable inserts ISO designation: CNMG120404 Thickness: 4.76 mm Inscribed circle / size: 12 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 80° Special features Material: carbide (CVD‑coated) Grade: T5115 (universal for cast iron) Rhombic CNMG plate form Double‑sided chipbreaker Cylindrical hole for clamping Suitable for external and internal turning FAQ What materials is this insert suitable for? The CNMG120404 T5115 insert is formulated as a universal grade for machining cast iron, offering a balanced combination of wear resistance and edge stability for a wide range of cast‑iron alloys. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius provides a good compromise between strength and finish; it helps produce smoother surfaces while preserving adequate edge robustness for general turning tasks. Is the insert compatible with standard ISO holders? Yes, the CNMG120404 follows ISO form and dimensions; compatibility with a specific holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. What coating technology is used on this grade? The cutting material is a CVD‑coated carbide grade (T5115), which enhances wear resistance and contributes to consistent performance in cast‑iron turning. How many usable edges are available on the insert? The rhombic, double‑sided design offers multiple indexed edges per insert, enabling economical use through rotation and reindexing before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com