Secure and precise workholding for metalworking productivity

VBH2084 Precision Boring Head Set R8, High-Precision - Vertex

Take advantage of a compact combination of precision adjustment, robust construction and broad spindle compatibility for reliable internal machining. The set’s R8 collet interface and solid build support repeatable results and stable cuts — order directly via Metav Werkzeuge or ask our consultants for assistance. VBH2084 Precision Boring Head Set (R8 Collet) by Vertex — fine adjustment & stable construction A precision boring head set, the VBH2084 is intended for accurate internal machining tasks on milling machines where an R8 collet interface is required. Precision bore adjustment to fine tolerances R8 collet interface for broad spindle compatibility Robust construction, total weight 6.6 kg Supplied as a complete boring head set Achieve consistent repeatability with fine adjustment The boring head assembly delivers precision where tight internal diameters matter. With micrometric adjustment capability, the tool allows controlled radial feed changes that translate into consistent bore diameters and improved repeatability across batches. For workshops seeking predictable results, a stable adjusting mechanism reduces rework and inspection time, turning setup effort into reliable output. Minimise setup complexity through standardised collet fit Compatibility is a decisive operational advantage: the integrated R8 collet interface ensures straightforward mounting in a wide range of milling spindles that accept R8 tooling. The standardised collet taper simplifies toolholding logistics and reduces the need for adaptors, resulting in faster changeovers. When referencing the VBH2084, the collet choice directly supports interoperability and smoother machine integration. Built for stability to reduce vibration and improve surface finish A solid construction improves mass at the cutting point and helps dampen vibrations during boring operations. The listed mass of 6.6 kg indicates a substantial assembly that contributes to cut stability and more consistent surface finishes. For operators, that stability often means fewer passes are required to meet tolerance, supporting efficient cycle times without compromising dimensional quality. A concise set that streamlines procurement and workshop inventory Supplied as a complete boring head set, this solution reduces the number of separate purchases and simplifies inventory management. Sourcing a single, ready-to-fit assembly removes complexity from procurement and supports the Metav principle of providing centralised access to precision tools. The result is a practical procurement path for precision tasks without fragmenting supplier relationships or stock lists. Discuss delivery and technical fit with Metav Werkzeuge in Emmerich — secure Vertex VBH2084 with R8 compatibility for precise internal machining from our European quality filter Technical data Article number: VBH2084-R8 GTIN: 4061905084928 Manufacturer: Vertex eCl@ss: 21041590 Numbers Weight: 6.6 kg SKU: VBH2084-R8 Special features Collet interface: R8 Product type: Precision boring head set Note in product description: rapid dispatch FAQ What tolerance levels can be achieved with this boring head set? Typical tolerance capability depends on machine rigidity and tooling setup; the VBH2084 precision boring head set is designed for fine adjustments that support tight, repeatable internal diameters when used on suitably rigid milling equipment. Which spindle taper does the set fit? The set uses an R8 collet interface, so it fits spindles and toolholders compatible with the R8 taper standard, ensuring broad compatibility with common milling machines. Is the set heavy to handle in the workshop? The assembly has a mass of 6.6 kg, which reflects its solid construction aimed at stability; handling requires normal care for medium-weight tooling but contributes to vibration damping during operation. Who manufactures the tooling and what is the SKU? The tooling is manufactured by Vertex; the set is listed under SKU VBH2084-R8 and marketed as a precision boring head set. Does the product include multiple boring heads or accessories? The item is supplied as a complete boring head set; specific contents are indicated by the SKU VBH2084-R8 and may vary by configuration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VBH620 Precision Boring Head Set BT-40, M16x2.0 Thread - Vertex

Benefit from precise adjustment via the M16x2.0P fine thread and the stable BT-40 taper, combined with a solid 6.5 kg construction that supports consistent internal machining results. Order the VBH620 directly via Metav Werkzeuge or ask our consultants if needed. VBH620 Precision boring head set (BT-40, M16x2.0P) by Vertex VBH620 Precision boring head set is a finely adjustable tool for high-accuracy internal machining tasks on milling machines and machining centres. Precision boring head set BT-40 M16x2.0 fine-adjustment thread Robust construction, 6.5 kg mass Compatible with Vertex machining centres Accuracy that stabilises production The design focuses on delivering repeatable precision for internal bores. The combination of a rigid BT-40 taper and a fine M16x2.0P adjustment thread enables micro-adjustments without frequent recalibration, which translates into fewer scrap parts and tighter tolerances. Interpreting the mechanical interface is straightforward: the taper guarantees secure clamping in the spindle, while the fine thread provides controlled cutting-edge displacement, improving finish and dimensional control for critical assemblies. Designed for smooth integration into the machine park Designed to fit standard toolholders, the set integrates with conventional milling spindles and machining centres using the BT-40 interface. With a mass of 6.5 kg, the assembly benefits from increased inertia, reducing chatter and improving surface quality when boring at moderate feed rates. The mechanical arrangement supports consistent cutting geometry, making the set suitable for series production where stability and time-efficient changeover are priorities. The VBH620 configuration allows technicians to convert set-up accuracy into measurable process reliability. Practical workshop advantages and uptime improvement The construction emphasises serviceability and robust operation, which helps to reduce unplanned downtime in daily shop-floor use. The precise adjustment mechanism minimises the need for repeated tool trials and enables faster set-ups, lowering cycle-time per component. For workshops focused on delivering consistent bore sizes and surface integrity, this boring head set supports predictable outcomes and reduces rework, contributing to overall process economy and throughput. Contact Metav Werkzeuge for tailored technical advice on the VBH620 precision boring head set — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and compatibility checks Technical Data SKU: VBH620-BT40 GTIN: 4061905089534 Manufacturer: Vertex Weight: 6.5 kg Thread: M16x2.0P Facts Taper: BT-40 Article number: VBH620-BT40 Special features Precision boring head set Suitable for machining centres Robust construction FAQ What machines is this boring head compatible with? The VBH620 precision boring head set is compatible with machines accepting a BT-40 taper and is intended for use on milling machines and machining centres. How is fine adjustment achieved on the set? Adjustment is made via the M16x2.0P fine thread, which allows precise, incremental displacement of the cutting edge for accurate bore diameter control. Does the weight influence machining stability? Yes, the 6.5 kg mass contributes to spindle inertia and helps reduce vibration during boring, supporting improved surface finish and dimensional stability. Is this set suitable for series production? The mechanical stability and fine-adjustment capability make the set well suited to series production where repeatable bore quality and reduced set-up time are required. Who manufactures the product and where can technical details be checked? The product is manufactured by Vertex; further technical compatibility and application advice can be obtained from Metav Werkzeuge or directly through the factory documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VBH620 Precision Boring Head Set BT-50, M24x3.0P Thread - Vertex

Take advantage of the combination of precise M24 fine adjustment, a BT-50 machine interface and a solid 8 kg mass for stable bore finishing — a compact package that supports consistent production tolerances. Order the VBH620 precision boring head set directly via Metav Werkzeuge or contact our advisers for compatibility checks. VBH620 Precision Boring Head Set — BT-50 Interface, M24 Fine Adjustment (Vertex) The VBH620 is a precision boring head set engineered for fine internal diameter adjustment in machining centres and conventional toolroom machines High-precision fine adjustment M24 thread Compatible with BT-50 taper systems Solid 8 kg mass for machining stability Micrometre-level control for consistent bore accuracy The VBH620 delivers fine radial adjustment via an M24 × 3.0 pitch thread, enabling controlled, repeatable corrections in small increments. This mechanism converts rotary motion into precise linear displacement, so a single indexed turn produces a predictable radial change; that behaviour simplifies process planning and reduces the need for iterative trial cuts. The combination of a robust adjustment screw and carefully finished bearing surfaces provides consistently low runout, which directly benefits bore cylindricity and surface finish. For production-oriented shops, the result is fewer scrapped parts and reduced rework time, a clear efficiency gain. Stable interface and reduced vibration for superior surface quality A correctly matched taper and sufficient mass are fundamental for stability during internal finishing. The VBH620’s BT-50 compatibility ensures a direct, standardised connection to spindles that accept this shank form, while the unit’s 8 kg mass contributes to inertial damping under cutting loads. The result is improved tool stability, less chatter and a more uniform surface texture inside the bore. Where processes demand tight tolerances and repeatable results, this combination of secure clamping and solid mass reduces variability and supports predictable cycle times. Streamlined integration and straightforward workshop handling The set is designed for straightforward integration into existing tool inventories that use BT-50 holders and standard fine-adjustment procedures. The M24 fine adjustment is familiar to machinists and maintenance teams, which shortens setup time and reduces training overhead. Routine checks and calibration follow established practices for boring heads: verify runout, confirm adjustment indexing and secure clamping in the spindle before cutting. For queries about machine compatibility, setup advice or detailed specifications, Metav Werkzeuge’s technical advisers are available by email or phone to provide targeted support. Reliable sourcing and service from a precision partner Procurement choices influence throughput and quality assurance. Vertex supplies the component with an industrial pedigree, and Metav Werkzeuge offers a European distribution and quality-filtering point from its Emmerich warehouse. This supply chain arrangement combines manufacturing competence with localised service: rapid delivery options, consolidated purchasing for workshop fit‑outs and access to specialist advice. The arrangement supports workshops and industrial users who value predictable availability and a consistent quality standard across their metrology and tooling purchases. Contact Metav Werkzeuge for expert advice on Vertex tooling and secure the VBH620 precision boring head set from our Emmerich warehouse. Technical Data SKU: VBH620-BT50 GTIN: 4061905090936 Manufacturer: Vertex Core technical data Weight: 8 kg Thread: M24 × 3.0 pitch eClass: 21041590 Special features Precision boring head set BT-50 taper compatibility Fine radial adjustment via M24 thread FAQ Which machine taper fits this boring head set? The VBH620 precision boring head set accepts a BT-50 taper interface, matching standard BT-50 toolholders and spindles for straightforward installation. What type of adjustment does the set use for bore correction? Adjustment is performed via an M24 × 3.0 fine-thread mechanism on the VBH620, giving predictable, micrometre-scale radial changes for accurate finishing. Is the VBH620 heavy enough to reduce vibration during cutting? With a mass of 8 kg, the VBH620 provides additional inertial damping compared with lighter assemblies, supporting improved stability and surface quality in many finishing operations. Can this set be integrated into an existing tool setup quickly? Yes — the VBH620 by Vertex is designed for compatibility with standard BT-50 systems and familiar fine-adjustment practice, enabling rapid integration into established workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VBH620 Precision Boring Head Set SK-40, M16x2.0 Thread - Vertex

Take advantage of the combination of tight dimensional control, broad machine compatibility and robust construction to keep machining tolerances consistent and setup times low. The set’s SK-40 compatibility and M16 x 2.0 thread allow integration with conventional toolholders while the compact mass supports stable boring runs. Order the set directly via Metav Werkzeuge or consult the team for specification matching and delivery options. VBH620 Precision Boring Head Set — high-precision adjustment with SK-40 taper VBH620 is a precision boring head set designed for fine internal machining on milling machines and machining centres, compatible with standard SK-40 taper toolholders and suited to tasks requiring repeatable bore accuracy. High-precision adjustment for tight tolerances SK-40 taper compatibility for common toolholders M16 x 2.0 thread for secure cutter mounting Robust assembly weight of 6.5 kg for stability Stable accuracy for repeatable bores The set delivers consistent bore accuracy through finely graduated adjustment, which reduces the need for repeated trial cuts. The integrated adjustment mechanism provides small, measurable increments for diameter correction, enabling predictable material removal and repeatable results across series production. This reduces scrap rates and shortens setup iterations, supporting lean machining workflows while maintaining close tolerances on internal diameters. Broad machine compatibility and secure mounting Compatibility with the SK-40 taper ensures straightforward integration into a wide range of milling spindles and toolholders commonly used in machining centres. The M16 x 2.0 mounting thread secures the cutting head and accessories with standardised engagement, preventing axial play during heavy feeds. The tool’s mass (approx. 6.5 kg) contributes to damping of vibration during boring operations, improving surface finish and protecting cutting edges from undue chatter. Practical design for workshop efficiency The construction combines serviceability and robustness: modular components simplify changeover of cutting inserts and allow measured adjustments without disassembly. Where micro-adjustments are required, the clear mechanical indexing and labelled increments expedite setup. The design reduces calibration time and supports efficient changeovers between workpieces, benefiting production environments that demand both precision and throughput. Built trust — engineered by a recognised manufacturer Manufactured under the Vertex brand, the set reflects established standards in precision toolmaking and is intended for professional workshops and industrial users seeking a reliable boring solution. The configuration is optimised for everyday machining tasks as well as for finer, precision-critical operations, providing a practical balance between adjustability and mechanical stability. Contact Metav Werkzeuge in Emmerich for application advice, configuration checks and delivery information regarding the Vertex VBH620 precision boring head set Technical data Article number: VBH620-SK40 Manufacturer: Vertex GTIN: 4061905090523 Facts Weight: 6.5 kg Thread: M16 x 2.0 Special features Shank type: SK-40 Model: VBH620 FAQ What machines is the boring head set compatible with? Compatibility is achieved via the SK-40 taper; the VBH620 fits machines and toolholders accepting an SK-40 shank and is suitable for milling machines and machining centres. How is diameter adjustment performed on the set? Diameter correction uses a fine mechanical adjustment mechanism; the VBH620 provides measured increments for predictable material removal and repeatable bore sizes. Can the VBH620 handle heavy cuts without vibration? The assembly mass of 6.5 kg and stable mounting via SK-40 reduce vibration during conventional boring operations, improving finish and cutter life. Which thread is used for cutter mounting and accessories? The set uses an M16 x 2.0 thread for cutter attachment and accessory fixation, ensuring secure engagement and standardised compatibility Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VBH620 Precision Boring Head Set SK-50, M24x3.0 Thread - Vertex

Take advantage of high-precision adjustment, robust mass for stable machining and direct compatibility with SK-50 toolholders to improve bore repeatability and reduce rework; order the VBH620 directly via Metav Werkzeuge or consult our specialists for application guidance. VBH620 precision boring head set — SK-50 compatibility, M24x3.0 adjustment The VBH620 is a precision boring head set designed for fine, repeatable internal diameter machining on toolholders and machining centres using SK-50 collets. Fine M24x3.0 adjustment thread Compatible with SK-50 collets Stable 7.8 kg mass for vibration damping Consistent bore accuracy for demanding parts A precision boring head delivers controlled incremental movement to finish bores to tight tolerances. The VBH620 employs a fine M24x3.0 thread for micro-adjustment, enabling predictable increments without complex measuring routines. This mechanical adjustment method improves repeatability from setup to setup and reduces the need for manual rework. For production environments, this means fewer scrap parts and a more consistent output across batches. Stable mass and geometry that protect surface quality Mass and rigidity directly influence vibration and surface finish. The assembly’s 7.8 kg mass contributes to damping of spindle-induced vibration, stabilising the cutting edge and supporting a smoother finish. Combined with a compact, concentric construction, the result is reduced tool chatter and longer insert life. The design therefore supports both quality improvements and lower tooling costs over time. Seamless integration with SK-50 toolholding systems Compatibility with SK-50 collet systems simplifies tool-room logistics and shortens changeover times. The boring head set mates directly with standard SK-50 holders, preserving spindle concentricity and maintaining axial alignment during adjustment. The collet interface ensures secure clamping and straightforward removal for maintenance, making it suitable for heavy-duty CNC applications where reliable clamping and repeatable positioning are essential. Reliable manufacturer pedigree and traceable identification Produced by Vertex, the assembly is delivered with clear identification for procurement and traceability. The SK-50 interface and the M24x3.0 adjustment mechanism reflect industry-standard dimensions that facilitate documentation and spare-part planning. Using components with defined identifiers supports quality management systems and makes integration into existing production documentation straightforward. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VBH620 into existing toolholder setups and to arrange immediate supply from Emmerich. Technical data Article number: VBH620-SK50 GTIN: 4061905091278 Manufacturer: Vertex Facts Weight: 7.8 kg Thread: M24x3.0P Collet type: SK-50 eClass: 21041590 Special features Precision boring head set Suitable for SK-50 collet systems SKU: VBH620-SK50 FAQ What machines is this boring head set compatible with? The VBH620 precision boring head set is designed for machining centres and lathes that accept SK-50 toolholders, providing a straightforward fit with standard SK-50 interfaces. How is fine adjustment achieved on the VBH620? Adjustment is carried out via the M24x3.0 thread, which allows micro-increments for bore diameter correction and dependable repeatability in serial production. Does the mass of the unit affect machining performance? Yes. The unit’s 7.8 kg mass improves vibration damping and contributes to a better surface finish and extended tool life during heavy cutting operations. Is the VBH620 suitable for high-precision finishing tasks? The VBH620 is engineered as a precision boring head set and is suitable for finishing operations where controlled incremental adjustment and stability are required to meet tight tolerances. Where can procurement and technical specification documents be obtained? Specification details and procurement identification are provided with the product; reference the SKU VBH620-SK50 and GTIN 4061905091278 when requesting documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VCF-500R 2R Replacement Blade Set for Chamfering/Deburring Machine, 10 Pieces - Vertex

Take advantage of a reliable combination of 2R replacement blades and clear compatibility with the VCF chamfering and deburring series to maintain steady throughput and predictable quality. Order the replacement set directly via Metav Werkzeuge or consult the specialists for inventory planning. VCF-500R-2R replacement 2R blades for chamfering and deburring machines by Vertex The VCF-500R-2R is a replacement set of 2R blades designed for use with Vertex VCF chamfering and deburring machines, providing consistent edge preparation for production environments. Replacement 2R blades for VCF machines Compatible with Vertex VCF chamfering series Supplied as a set of 10 pieces GTIN-listed for traceability Consistent edge quality for uninterrupted production High-volume chamfering and deburring workflows demand tools that deliver repeatable results. The 2R blade designation denotes the specific cutting geometry tailored to edge finishing operations on VCF systems, producing uniform chamfers and reliable deburring in one pass. Using standardised replacement blades reduces variability between cycles, which supports process stability and lowers the risk of scrap. The availability of a set of 10 simplifies maintenance planning and reduces setup interruptions, helping to keep machines in productive use. Easy replacement reduces downtime and simplifies logistics Standardised spare parts accelerate routine servicing. The replacement blades are supplied as a uniform set, enabling quick swaps during scheduled maintenance. Each item is traceable via the GTIN, while the SKU VCF-500R-2R simplifies stock keeping and reordering within procurement systems. Clear labelling and consistent fitment with the VCF chamfering and deburring machine shorten intervention times and make inventory management more predictable for production planners. Reliable compatibility and supply chain clarity for planners Suppliers that provide documented compatibility support long-term planning. These replacement blades are specified for the Vertex VCF chamfering and deburring range, which aids selection and prevents mismatch. The product is positioned for industrial use where tool repeatability and supply certainty are priorities. Partnering with a distributor that acts as a quality filter for the European market ensures that replenishment arrives ready for use, backed by experience in precision tooling distribution. For a dependable supply of Vertex replacement blades for the VCF chamfering system, request the VCF-500R-2R set via Metav Werkzeuge or ask our consultants for assistance with inventory and compatibility planning. Technical Data Article number: VCF-500R-2R GTIN: 4061905088421 Brand: Vertex Content: 2R blade Core specifications Pieces per set: 10 Special features Compatible with VCF chamfering and deburring machine Category: Vertex Pack type: set FAQ Are these blades compatible with all VCF models? The replacement set is specified for the Vertex VCF chamfering and deburring series; compatibility should be checked against the exact VCF model and machine configuration. What does the 2R designation mean for the blade? The 2R designation describes the blade geometry used for chamfering operations; the VCF-500R-2R set is configured to deliver the edge profile expected in standard VCF finishing processes. How are the blades supplied and tracked for stock management? The blades are supplied as a set of 10 pieces and are traceable via the GTIN 4061905088421 and SKU VCF-500R-2R for straightforward inventory management. Can the blades be sharpened or are they disposable? Blade life and maintenance depend on application and material; for predictable performance, replacement with the VCF-500R-2R set is recommended as part of regular maintenance cycles. Is the VCF-500R-2R suitable for different materials? Suitability depends on the workpiece material and machine settings; consult technical specifications for the VCF series to confirm fit for a particular application. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VCF-500R-RMC Accessory for Chamfering and Deburring Machine VCF - Vertex

Take advantage of an original Vertex accessory that ensures consistent edge finishing and smooth integration with the VCF chamfering and deburring system; the combination of precise radius cutting and reliable compatibility supports faster cycle times and reduced manual rework. Order the spare part directly via Metav Werkzeuge or request further technical clarification from their consultants. VCF-500R-RMC — Vertex round cutter accessory for VCF chamfering and deburring machine The VCF-500R-RMC is a round cutter accessory for the Vertex VCF chamfering and deburring machine, developed to perform consistent edge rounding and efficient deburring in industrial and workshop production environments Accessory for VCF chamfering and deburring machine Original Vertex spare part Fast dispatch from European stock Faster, more consistent edge finishing with a purpose-built cutter The inclusion of a round cutter designed for chamfering and deburring workflows reduces variability in finishing operations and shortens process time. Fitted as an accessory to the VCF machine, the tool stabilises the cutting geometry and helps deliver precision edge radii across repeated cycles. For production lines and job-shop environments where repeatability matters, this accessory contributes to higher throughput by lowering the need for manual rework and downstream corrective steps. The geometry of the cutter promotes consistent contact with workpiece edges, translating directly into improved process reliability and fewer inspection failures. Integration and operational benefits for workshop and industrial use As an original Vertex accessory, compatibility is assured with the corresponding VCF deburring and chamfering platform, simplifying replacement and maintenance planning. The design focus is on operational continuity: mounting and alignment are straightforward on standard VCF set-ups, which reduces downtime during tool change. Improved operational efficiency results from shorter tool-change intervals and the predictable behaviour of a purpose-made cutter, supporting steady production flow in mixed-series or high-mix manufacturing runs. Where process documentation and traceability matter, the use of an authentic spare part supports compliance with internal quality protocols. Practical advantages that support quality and throughput Beyond individual operations, this accessory contributes to overall process quality by producing repeatable edge conditions that ease downstream assembly and surface treatments. The consistent edge profile delivered by the round cutting geometry lowers the probability of burr-related assembly issues and can simplify subsequent finishing steps. For buyers seeking to maintain machine performance with original components, the accessory represents a pragmatic choice to protect investment in VCF equipment while sustaining part quality and reducing hourly labour spent on manual deburring. Contact Metav Werkzeuge for original Vertex accessories and ensure uninterrupted chamfering performance with the VCF-500R-RMC; fast dispatch from Emmerich and technical support are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VCF-500R-RMC GTIN: 4061905083563 eClass: 21049248 Content: round cutter Facts Image file size: 16426 bytes Asset count: 1 Special features Brand: Vertex Category: Accessory for VCF chamfering and deburring machine Shop title: Zubehör Vertex schnell Online beziehen Description note: fast dispatch, PayPal payment option Image available: main asset (thumbnail) FAQ What is the VCF-500R-RMC used for? The VCF-500R-RMC is an accessory round cutter for the Vertex VCF chamfering and deburring machine, intended to produce consistent edge radii and assist in deburring operations. Is the VCF-500R-RMC an original Vertex part? Yes, the VCF-500R-RMC is supplied as an original Vertex accessory and is specified for compatibility with the VCF series. Can the VCF-500R-RMC reduce manual finishing work? Using the round cutter on the VCF platform reduces variability in edge finishing and lowers the need for subsequent manual deburring. How is availability communicated for this accessory? Availability and dispatch information are provided via Metav Werkzeuge; the product listing notes fast dispatch and online purchase options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-300G Grinding Wheel Accessory for Cutting and Grinding Machine VEC - Vertex

Take advantage of the combination of precise compatibility with VEC machines, consistent surface finish and straightforward replacement to keep production running smoothly. Order this grinding accessory directly via Metav Werkzeuge or consult our specialists for application-specific advice. VEC-300G-G grinding wheel for cutting and grinding machines, Vertex VEC-300G-G is an accessory designed to deliver consistent finishing performance on VEC-series cutting and grinding equipment Compatible with VEC-300G machines Balanced for stable grinding Lightweight at 0.6 kg SKU VEC-300G-G, GTIN ready Stable finishing that reduces rework The accessory is engineered to provide a consistent surface finish on workpieces processed on VEC cutting and grinding equipment. By using a purpose-made grinding wheel, shops benefit from reproducible results that cut down on post-process rework and inspection time. The design focuses on rotational stability and consistent abrasive contact, which supports predictable removal rates and steady component tolerances. This improves throughput while maintaining process control. Fast replacement and machine compatibility for uptime As an accessory tailored for VEC tooling systems, compatibility simplifies changeover and maintenance planning. The balanced construction and compact 0.6 kg mass reduce vibration and loading on the machine spindle, helping to maintain concentricity during operation. Routine replacement is straightforward, and the accessory’s format aligns with existing VEC maintenance procedures to keep downtime minimal. Clear identification via SKU VEC-300G-G and GTIN facilitates stock management and traceability. Robust choice for varied workshop applications Manufactured by Vertex for use on VEC-series grinders and cutters, this wheel supports a range of finishing tasks where reliable abrasive performance is required. The configuration is particularly suited to operations that prioritise process reliability and repeatable surface quality. Choosing an accessory certified for the host machine protects cycle stability and contributes to longer tool life across the toolchain, supporting a pragmatic approach to workshop efficiency and quality assurance. Contact Metav Werkzeuge in Emmerich for tailored technical guidance and ordering of the Vertex grinding wheel (SKU VEC-300G-G); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VEC-300G-G GTIN: 4061905094675 Type: Grinding wheel Manufacturer: Vertex Facts Weight: 0.6 kg eClass: 21069101 Suitable for: VEC-300G Special features Accessory for cutting and grinding machine VEC SKU: VEC-300G-G FAQ What machines is this grinding wheel compatible with? This grinding wheel is designed for use with VEC-series cutting and grinding equipment and is explicitly suitable for the VEC-300G configuration. How does the accessory affect surface quality? The balanced wheel construction promotes a consistent surface finish and reduces the likelihood of vibration marks during grinding, supporting tighter tolerances. Is the wheel easy to replace during routine maintenance? Yes, the accessory aligns with standard VEC changeover procedures; VEC-300G-G is identifiable by its SKU for quick stock retrieval and replacement. Can this accessory reduce machine downtime? By delivering stable rotational behaviour and straightforward replacement, the wheel contributes to shorter changeover times and fewer interruptions in the production cycle. Who manufactures the accessory and how is it identified? The accessory is supplied by Vertex and is listed under SKU VEC-300G-G with GTIN 4061905094675 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-300G-C 300mm Cutting Wheel Accessory for VEC Cutting and Grinding Machine - Vertex

Take advantage of a lightweight, precision cutting wheel that fits the VEC series and helps maintain consistent cut quality; its simple compatibility and low mass support fast replacement cycles and smooth workshop workflows. Order directly via Metav Werkzeuge or consult the Emmerich team for availability and technical advice. VEC-300G-C Cutting Wheel for VEC Cutting and Grinding Machines — Lightweight, Compatible VEC-300G-C is a replacement cutting wheel designed for use with the VEC range of cutting and grinding machines, intended to restore cutting performance quickly and precisely Compatible with VEC-300G machine Lightweight at 0.06 kg for swift handling Precision cutting wheel design Vertex brand reliability Consistent cutting results with workshop-grade precision The VEC-300G-C is engineered to deliver consistent cuts across routine production tasks, supporting repeatable results on the VEC platform. The reduced mass of 0.06 kg improves handling during changeover and minimises spindle load variations, which helps maintain dimensional accuracy. In industrial environments where cycle time and repeatability matter, a precisely balanced cutting wheel reduces micro‑vibrations and preserves tool life of the host machine, leading to fewer rejects and steadier process control. Faster maintenance and shorter downtime through simple replacement A low-complexity replacement part, this accessory allows rapid wheel changes without complex setup procedures. The straightforward design focuses on secure mounting and a true running condition to avoid realignment work after installation. For maintenance teams, the result is less machine downtime and faster return to production. The product’s compatibility with the VEC series cuts administrative handling and simplifies inventory, supporting predictable maintenance cycles and effective workshop planning. Practical fit for mixed production environments and supply reliability As an accessory designed for cutting and grinding applications, the wheel integrates into diverse job mixes where small, precise cuts are required. Specified as a wheel accessory for the VEC platform, it supports a wide range of workshop tasks without necessitating additional adapters. When paired with a dependable supply partner, the item becomes part of a robust procurement strategy that prioritises availability and traceable quality. The Vertex origin assures adherence to industrial standards expected by manufacturing and maintenance professionals. Contact Metav Werkzeuge for availability and tailored technical advice on Vertex cutting wheels — Emmerich-based supply with reliable processing: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: VEC-300G-C GTIN: 4061905084898 Manufacturer: Vertex Facts Weight: 0.06 kg ECLASS: 21069101 Special features Type: Cutting wheel Suitable for: VEC-300G cutting and grinding machine Category: Vertex accessory FAQ What machines is this wheel compatible with? The accessory is compatible with the VEC-300G cutting and grinding machine and designed for straightforward mounting on the VEC series. How does the wheel affect cutting quality? The precision cutting wheel from Vertex maintains consistent cutting performance and reduces micro‑vibrations, helping to preserve the host machine’s accuracy. Is the product lightweight for easier handling during changeovers? Yes, the wheel weighs 0.06 kg, which facilitates faster handling and reduces spindle load during replacement. Can this accessory be kept as a standard stock item for maintenance teams? The VEC-300G-C is suitable for stocking as a replacement part to shorten maintenance cycles and minimise production interruptions. Who manufactures this cutting wheel? The wheel is manufactured by Vertex and supplied for professional workshop use under the Vertex accessory range. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-500G Grinding Wheel Accessory for Cutting and Grinding Machines, 0.6kg - Vertex

Take advantage of the combination of compatibility with the VEC machine family, consistent finishing performance and lightweight handling for a smooth workshop flow; order through Metav Werkzeuge or ask our consultants for fitting advice. VEC-500G-G Grinding Wheel — Accessory for VEC Cut & Grind Machines by Vertex The VEC-500G-G is a replacement grinding wheel designed to deliver consistent edge finishing on VEC cutting and grinding machines, suitable for workshop and industrial use. Compatible with VEC-500G series machines Precision grinding for consistent edge quality Lightweight 0.6 kg for easy mounting and handling Durable finishing that improves process reliability The grinding wheel is engineered to provide stable material removal and uniform edge geometry, reducing the need for repeated rework. By maintaining constant contact characteristics and abrasive behaviour, this accessory helps to limit process variation and reduce downtime. Where operators require predictable finishing results, the wheel's specification supports repeatable outcomes on metal and composite edges, contributing to a measurable improvement in throughput and component quality. Ready integration with VEC systems for straightforward replacement Designed for straightforward fitting on VEC cut-and-grind machines, the accessory ensures compatibility with the VEC-500G series, enabling quick changeover and minimal adjustment. The balanced construction reduces vibration during operation, which improves surface finish and extends the life of toolholders and bearings. For workshops upgrading maintenance schedules, this wheel simplifies inventory management through a clear machine match and a compact, lightweight profile. Practical handling and workshop advantages At 0.6 kg the wheel is lightweight, making handling and installation safer and faster for maintenance teams. The compact mass assists with ergonomic change procedures and lowers the risk of incidental damage during handling. Supplied as an accessory for established VEC systems, the component supports existing production workflows and helps maintain consistent edge quality across batches. Backed by Vertex manufacturing standards, the wheel forms part of a robust workshop supply chain that prioritises dependable results. Contact Metav Werkzeuge for enquiries about Vertex accessories, compatibility checks for VEC machines and expedited supply from Emmerich — Metav's specialists will advise on fitment and stock availability Technical data SKU: VEC-500G-G GTIN: 4061905095375 Manufacturer: Vertex Facts Weight: 0.6 kg eClass: 21069101 Special features Type: Grinding wheel Suitable for: VEC-500G machines Category: Vertex Image available: VEC-300G-c-main / VEC-300G-c-detail FAQ Is this wheel compatible with all VEC cutting and grinding machines? The accessory is specified for use with the VEC-500G series; compatibility with other VEC models should be confirmed against machine documentation or via Metav Werkzeuge. What benefits does this grinding wheel offer for edge quality? The VEC-500G-G from Vertex delivers uniform abrasive action and reduced vibration, which together support consistent edge quality and fewer rework cycles. How often should the wheel be replaced in a production environment? Replacement frequency depends on material, feed and duty cycle; monitoring finish quality and wheel diameter will indicate when the Vertex wheel requires change. Can the wheel be used on non-metal materials? The wheel is intended for finishing applications on materials typically processed by VEC cut-and-grind machines; material-specific suitability should be verified for special plastics or composites. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-500G-C 0.06kg Cutting Wheel Accessory for VEC Cutting and Grinding Machine - Vertex

Benefit from precise compatibility with the VEC series and ultra-light construction for minimal spindle load; the accessory combines reliable alignment and straightforward replacement to keep production moving. Order the VEC-500G-C cutting wheel directly via Metav Werkzeuge or request advice from our product consultants. VEC-500G-C Cutting Wheel (Accessory for VEC Cutting and Grinding Machine) – Vertex A VEC-500G-C cutting wheel designed as an accessory for the VEC series cutting and grinding machines, optimised for precise cutting tasks in small to medium-sized workshops. Accessory for VEC series machines Precision cutting wheel design Ultra-lightweight at 0.06 kg Consistent cuts through precise, purpose-built design The cutting wheel is engineered to deliver stable, repeatable performance when used with the VEC cutting and grinding platform. Its compact mass — 0.06 kg — reduces rotating inertia, which helps to lower vibration and supports steadier edge quality in short production runs and setup tasks. For machining environments where changeover speed and accuracy matter, this accessory provides a measurable improvement in process consistency and contributes to lower scrap rates by maintaining a reliable cutting interface. Simple integration with VEC machines for minimal downtime Designed specifically as an accessory to the VEC range, the component integrates with standard mounting arrangements on the series and is intended for straightforward replacement during scheduled maintenance. The accessory’s exact fit to the VEC-500G interface reduces alignment work and shortens changeover time, thereby streamlining workshop workflows. Technically minded buyers will appreciate that the accessory supports uninterrupted operation of the primary cutting and grinding unit while allowing rapid restoration of tool geometry when required. Fit for professional toolrooms and industrial workshops This cutting accessory is aimed at machine shops and toolroom environments that rely on dependable consumables to support daily production. The part’s concise specification and clear identification (SKU VEC-500G-C, GTIN 4061905095351) simplify stock management and reordering. Combined with Metav’s quality-filtered supply from Emmerich, the accessory suits purchasers who prioritise traceability and rapid replenishment. The lightweight construction and precision focus reflect Vertex’s commitment to engineered components that help maintain throughput without compromising control. Contact Metav Werkzeuge for tailored advice on the Vertex VEC-500G-C cutting wheel and fast dispatch from our Emmerich warehouse Technical data Article number: VEC-500G-C Manufacturer: Vertex GTIN: 4061905095351 Weight: 0.06 kg Facts Weight: 0.06 kg Eclass: 21069101 Special features Type: cutting wheel Designed for: cutting and grinding machine VEC Compatible with: VEC-500G Category: Vertex accessories FAQ What machines is this accessory compatible with? The accessory is compatible with the VEC series and is specified for use with the VEC-500G interface, making it suitable for Vertex VEC cutting and grinding machines. How does the lightweight design affect operation? The lightweight construction of the VEC-500G-C reduces rotating mass, which helps to lower vibration and supports more consistent cut quality during routine machining tasks. How is the part identified for ordering? Order by SKU VEC-500G-C or GTIN 4061905095351 to ensure the correct Vertex cutting wheel is supplied for the VEC platform. Is the accessory suitable for quick changeovers? The component is designed for straightforward replacement on VEC units, helping to shorten changeover procedures and reduce machine downtime. Can the accessory be used in professional workshops? Yes, the VEC-500G-C cutting wheel is aimed at machine shops and toolrooms that require dependable, traceable consumables for consistent production performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-600G Grinding Wheel Accessory For VEC Cutting And Grinding Machine - Vertex

Take advantage of precise compatibility and dependable rotational stability to maintain consistent cutting and finishing operations; benefit from easy replacement and guaranteed supply through Metav Werkzeuge. VEC-600G-G Grinding wheel — replacement accessory for VEC cutting and grinding machines by Vertex A VEC-600G-G grinding wheel accessory designed for use with VEC cutting and grinding machines, optimised to provide stable rotation and consistent material removal in workshop and light industrial applications Compatible with VEC-600G precision grinders Robust 0.6 kg construction for stable rotation Optimised for cutting and finishing operations Improved precision and consistent material removal The grinding wheel delivers repeatable performance that supports tight tolerances during cutting and finishing processes. Its balanced mass and construction reduce vibration, which contributes to stable rotation and a consistent surface quality on workpieces. For production environments where process stability matters, this accessory helps maintain machining parameters and reduces rework caused by irregular wheel behaviour. The design focuses on functionality, ensuring that the tool performs reliably under repeated use. Straightforward compatibility for fast replacement Designed specifically for the VEC series, the accessory offers clear compatibility with VEC-600G machines and mounts as a direct replacement part. The absence of complex adapters speeds up maintenance procedures, thereby reducing downtime. The wheel’s defined specifications mean it can be identified and stocked easily as a spare part, contributing to lean inventory management and faster exchange in routine servicing. Durability that supports continuous production Built for repetitive cycles in workshop settings, the wheel’s construction emphasises operational longevity and consistent running characteristics. Regular inspections for wear and roundness will predict replacement intervals and protect spindle bearings from imbalance-related loads. When selected as part of a parts management strategy, this accessory aids in sustaining throughput and predictable maintenance scheduling across production shifts. For supply, parts planning or fitting advice regarding the Vertex VEC-600G-G grinding wheel, rely on Metav Werkzeuge in Emmerich as a local precision partner and request specific technical documentation from their product specialists Technical data SKU: VEC-600G-G GTIN: 4061905095382 ECLASS: 21069101 Manufacturer: Vertex Type: Grinding wheel Weight: 0.6 kg Suitable for: VEC-600G Facts 0.6 kg 4061905095382 Special features Replacement accessory for VEC cutting and grinding machines Optimised for cutting and finishing operations Stable rotation characteristics for consistent surface quality FAQ Is this grinding wheel compatible with VEC-600G machines? Yes. The VEC-600G-G is specified as a replacement grinding wheel for the VEC-600G series and fits the machine without additional adapters. What effect does the 0.6 kg weight have on performance? A mass of 0.6 kg contributes to rotational stability, which helps reduce vibration and improves consistency during cutting and finishing operations. Can the wheel be used for both cutting and finishing tasks? The accessory is designed for use on cutting and grinding machines and is optimised to perform reliably across both material removal and finishing stages. How can wear be identified and when should the wheel be replaced? Inspect for uneven wear, loss of roundness or surface damage; replacement is recommended when balance or cutting performance deteriorates to avoid spindle stress and compromised part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

VEC-600G-C Cutting Wheel Accessory for Cut and Grind Machine, 0.06 kg - Vertex

Take advantage of a compact, workshop-ready accessory that combines simple handling with precise compatibility for Vertex VEC machines — the slim design and exact fit reduce changeover time and support reliable cutting processes. Order the part directly via Metav Werkzeuge or consult the Metav team for confirmation of suitability. VEC-600G-C — Vertex cutting wheel, compatible with VEC series, 60 g The VEC-600G-C is a dedicated cutting wheel accessory for Vertex VEC cutting and grinding machines, intended to deliver consistent sectioning performance in industrial and trade workshop applications. Cutting wheel for VEC series machines Compatible with VEC-600G model Lightweight 60 g for easy handling SKU VEC-600G-C, GTIN 4061905095368 Precise replacement for routine cutting tasks A compact cutting wheel designed as a direct accessory for the VEC family improves repeatability in daily workshop operations. The slim profile and modest mass help to reduce handling time during wheel changes, while the defined fit to the VEC series supports straightforward mounting. By specifying a part matched to the original machine series, downtime is minimised and process consistency is maintained through a replacement that aligns with the original equipment’s mounting and rotational characteristics. This contributes to a predictable production flow and lower cycle interruptions. Compatibility-focused design that simplifies maintenance Compatibility is a central feature: this accessory is listed as suitable for the VEC-600G and integrates with the VEC cutting and grinding platform. The modest weight of 0.06 kg (60 g) assists quick manual replacement and safer handling at the bench. The SKU and GTIN are provided to ensure the correct ordering and stock control procedures are followed, streamlining procurement and inventory management. For maintenance planners, a standardised part like this reduces the variety of spares required and aids faster turnaround during servicing. Support for efficient workshop logistics and quality assurance Choosing a branded spare that matches the machine family helps to maintain machine performance and supports consistent end results. Sourcing through an established distributor ensures traceability and reliability in supply. Metav’s role as a precision partner offers a consolidated procurement route for workshop consumables and accessories, helping to centralise orders and maintain stock continuity. The combination of targeted compatibility and lightweight handling makes this accessory a pragmatic component for routine replacements and scheduled maintenance cycles. For secure supply of Vertex cutting accessories, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or phone +49 2822 7131930 to confirm suitability for the VEC-600G and place an order Technical data SKU: VEC-600G-C GTIN: 4061905095368 Manufacturer: Vertex Facts Weight: 0.06 kg eClass: 21069101 Features Type: Cutting wheel (accessory for cutting and grinding machine VEC) Compatible with VEC-600G Category: Vertex FAQ Is this accessory compatible with the VEC-600G cutting and grinding machine? Yes. The VEC-600G-C is specified as compatible with the VEC-600G and is intended as an accessory for the VEC cutting and grinding series. What is the weight of the cutting wheel and how does that affect handling? The part weighs 0.06 kg (60 g); its low mass supports quicker manual handling and easier replacement during routine maintenance. How is the product identified for ordering and stock control? Identification is via SKU VEC-600G-C and GTIN 4061905095368 to ensure accurate procurement and inventory tracking. Can this wheel be used on other makes or models of machines? The wheel is listed for the VEC series, specifically the VEC-600G; compatibility with other machines has not been specified in the available product data and should be verified against the target machine’s mounting specifications. What information about materials or coatings is available for this accessory? Material and coating details are not specified in the provided product data; consult the technical datasheet or supplier documentation for further specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Verlängerungshebel 220

Kukamet Extension bar Additional Information and Technical Data:Manufacturer: KukametModel: Extension barMaterial: MetallExtension bar quick and easy order Online!!

Verschlussspanner 311 mit waagerechtem Fuß

Verschlussspanner 312 mit senkrechtem Fuß

Kukamet Riegelspanner Technical Data: and additional information:Manufacturer: KukametModel: RiegelspannerAblesbarkeit:Mounting: senkrechter FußMaximum compressive force: 1000 N - 1000 NSetting standard:Riegelspanner quick and easy order Online!!

Verschlussspanner 321 mit waagerechtem Fuß

Technical Overview:Manufacturer: KukametModel: RiegelspannerRiegelspanner quick and easy order Online!!

Verschlussspanner 331 mit waagerechtem Fuß

Kukamet Riegelspanner Technical Data: and Summary:Manufacturer: KukametModel: RiegelspannerRiegelspanner quick and easy order Online!!

Verschlussspanner 332 mit senkrechtem Fuß

Verschlussspanner 332 mit senkrechtem Fuß

Verschlussspanner 333 mit verlängertem Spezialarm

Verschlussspanner 333 mit verlängertem Spezialarm

Verschlussspanner 341 mit waagerechtem Fuß

Verschlussspanner 341 mit waagerechtem Fuß

Verschlussspanner 351 mit waagerechtem Fuß

Verschlussspanner 351 mit waagerechtem Fuß

Verschlussspanner 361 mit waagerechtem Fuß, leichte Serie

Verschlussspanner 361 mit waagerechtem Fuß, leichte Serie

Verschlussspanner 362 mit waagerechtem Fuß, leichte Serie

Verschlussspanner 362 mit waagerechtem Fuß, leichte Serie