Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
Ø10-Ø110mm Facing and Boring Head Set BT40, Holder BC2 - Vertex
The compact Vertex VBHC facing and boring head set combines BT‑40 compatibility with a wide bore range and stable construction; ideal for integrating precise internal machining into existing tooling solutions. Benefit from reduced setup time and consistent finish quality — order directly via Metav Werkzeuge or consult our specialists for application advice. VBHC-BT40-BC2 – Vertex facing and boring head set, BT‑40 compatible, Ø10–Ø110 mm The VBHC facing and boring head set for precision internal machining on BT‑40-equipped milling centres and machining centres BT‑40 toolholder compatibility Bore range Ø10–Ø110 mm High rigidity for stable cuts Easy fine adjustment for accuracy Built for consistent, measurable precision The VBHC set is designed to deliver repeatable results across series production and single-part work. With BT‑40 compatibility and a working range of Ø10–Ø110 mm, the kit enables both finishing and sizing of bores with minimal tool changes. The combination of rigid construction and precise adjustment mechanisms reduces vibration and runout, which directly improves surface finish and tolerances for internal machining operations. This reliability supports predictable cycle times and lowers scrap rates. Clear function: what the set performs and why it matters A facing and boring head set performs two core tasks: facing to machine flat surfaces and boring to enlarge and finish internal diameters to the required tolerance. The VBHC uses mechanical fine adjustment to control material removal in small, measurable increments, so operators achieve target diameters without repeated trial cuts. For those less familiar with boring heads, this means fewer measurement cycles and a faster path from setup to finished part, while preserving precision and extending tool life through controlled cutting conditions. Integration into workshop workflows The kit’s BT‑40 interface makes it straightforward to fit the heads into common spindle toolholders, simplifying logistics for shops that standardise on BT‑40 tooling. As a ready set, it reduces the need for multiple single tools and streamlines changeover procedures. The practical result is a lower number of toolholders at the machine and quicker transitions between facing and boring tasks. For production environments and specialist toolrooms alike, this supports higher uptime and a more efficient use of machine capacity. Practical benefits and operational efficiency Beyond diameter control and compatibility, the set emphasises operator efficiency: adjustment elements are accessible and designed for trusted repeatability, so setup times are shorter and measurement routines are simplified. The measurable bore range and compact design contribute to safer handling and storage. When combined with consistent inspection practices, the VBHC head set helps maintain quality targets across batch runs, providing a dependable component for precision machining processes. For BT‑40 machining centres, choose the Vertex VBHC facing and boring head set from Metav Werkzeuge for reliable, measurable precision — contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical data SKU: VBHC-BT40-BC2 GTIN: 4061905090554 Brand: Vertex Product type: Facing and boring head set Kit: Set Facts Bore range: Ø10–Ø110 mm Weight: 2.65 kg Toolholder: BT‑40 eCl@ss: 21041590 Special features Designed for facing and boring operations Compact construction for reduced overhang Fine adjustment for diameter control Suitable for integration with BT‑40 tool systems FAQ What bore sizes can be machined with this set? The VBHC facing and boring head set machines bores from Ø10–Ø110 mm, covering common internal diameters for precision finishing. Is the set compatible with my machine’s toolholder system? Compatibility is provided via a BT‑40 interface; the Vertex VBHC set fits BT‑40 toolholders used on many milling centres and machining centres. Does the set include features for fine diameter adjustment? Yes. The Vertex VBHC set includes fine adjustment mechanisms that allow precise, incremental control of the bored diameter for accurate finishing. Can the kit be used for both facing and boring in a single setup? The VBHC set is designed for facing and boring operations and can be integrated into workflows to reduce tool changes, helping to shorten setup times. What is the product identification for ordering or inventory? Order or reference the Vertex facing and boring head set using SKU VBHC-BT40-BC2 and GTIN 4061905090554 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø110mm Facing And Boring Head Set With MT3 Collets, 2.5kg - Vertex
Take advantage of the combination of consistent precision, a wide bore range (Ø10–Ø110 mm) and straightforward machine compatibility for reliable finishing and boring operations; order the set directly via Metav Werkzeuge or consult our specialists for tailored guidance. VBHC-MT3-BC2 Planing and Boring Head Set — MT-3 taper, Ø10–Ø110 mm A VBHC-MT3-BC2 planing and boring head set designed for precise facing and internal boring tasks across a broad diameter range, suitable for standard machine spindles. MT-3 taper for common machine spindles Suitable bores Ø10–Ø110 mm Compact set weighing 1.9 kg Precision facing and boring capability Consistent precision for finishing and bore accuracy The facing and boring unit delivers reliable accuracy by covering a broad working range from Ø10–Ø110 mm, which reduces the need for multiple specialised tools. The MT-3 taper provides secure seating in compatible spindles, ensuring stable rotation and concentricity during machining. When finishing internal diameters and faces, the controlled geometry of the toolhead minimises runout and helps maintain repeatable results, so parts meet dimensional tolerances with fewer adjustments. This supports efficient production planning and predictable cycle times. Simple integration with standard machines and quick setup Designed as a compact set, the unit integrates with conventional machine spindles using the MT-3 taper, enabling rapid changeover and minimised setup time. At 1.9 kg, the assembly balances compactness with sufficient mass to dampen minor vibrations without overburdening the spindle. For operators working across small-batch and repair applications, the compatibility with common tapers and the straightforward connection mean reduced tool inventory and faster restoration of machine capability. Clear mechanical interfaces simplify fitting and alignment, even in busy workshop environments. Built for dependable shop-floor performance The set is intended to increase uptime through dependable mechanical behaviour and straightforward functionality. By offering a single tool solution for facing and boring across a wide diameter spectrum, the assembly helps lower process complexity and the frequency of tool changes, positively affecting throughput. Produced under the Vertex umbrella, the unit aligns with expected workshop standards for reliability and repeatability, making it a pragmatic choice for precision-driven tasks that require consistent surface quality and concentricity. Choose the Vertex VBHC-MT3-BC2 for dependable facing and boring performance and contact Metav Werkzeuge to discuss compatibility with existing machines or to arrange a purchase through our European distribution channel. Technical Data SKU: VBHC-MT3-BC2 GTIN: 4061905088971 Brand: Vertex ECLASS: 21041590 Facts Weight: 1.9 kg Suitable bore range: Ø10–Ø110 mm Special features Taper type: MT-3 Delivered as a set Intended for facing and internal boring tasks FAQ Is the VBHC-MT3-BC2 compatible with standard Morse taper spindles? The VBHC-MT3-BC2 is specified with an MT-3 taper and is intended for machines accepting that taper standard, ensuring correct seating and rotational stability. What bore sizes can be machined with this set? The set covers a working range from Ø10 to Ø110 mm, allowing both small and medium internal diameters to be faced or bored with the same assembly. How heavy is the assembly and does that affect spindle balance? The complete assembly weighs 1.9 kg; the mass is designed to provide sufficient damping without adversely affecting spindle balance when installed correctly. Is the VBHC-MT3-BC2 supplied as a single unit or as multiple components? The product is supplied as a set, including the components necessary for facing and boring operations within the stated diameter range. Which applications are best suited to this facing and boring head set? The unit is suited to finishing and internal boring on components requiring consistent concentricity and surface quality, particularly in workshops and small-batch production where tool versatility reduces changeovers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø110mm Facing and Boring Head Set, NT-40 Collet System - Vertex
With NT-40 compatibility, a wide operating range of Ø10–Ø110 mm and a compact 2.8 kg construction, the VBHC face and boring head set improves set-up speed and maintains concentric accuracy in serial and jobbing work. Order the VBHC-NT40-BC2 directly via Metav Werkzeuge or ask our consultants if needed. VBHC face and boring head set — NT-40 interface, Ø10–Ø110 mm, Vertex The VBHC face and boring head set is a precision NT-40 collet-mounted accessory for facing and boring operations, intended for workshop and production environments where flexible diameter control and repeatable accuracy are required. NT-40 collet interface for standard spindles Diameter range Ø10–Ø110 mm compatibility Compact set, total weight 2.8 kg Precision boring and facing capability Faster set-ups through a standardised NT-40 interface Built for machines with the standard NT-40 taper, the head set reduces adapter complexity and shortens changeover times. The collet interface ensures axial rigidity and uniform clamping force, which contributes to improved cycle-time stability and better surface finish. For production-oriented workshops and toolrooms, this results in fewer adjustments and more predictable process control, translating into higher throughput with consistent tolerances. Broad diameter range that reduces tool changes A working span of Ø10–Ø110 mm enables a single toolset to cover multiple bore sizes without repeated retooling. The adjustable boring and facing capability provides gradual diameter increase and fine radial corrections, so fewer toolholders are required on the workbench. This flexibility supports mixed-batch production and short runs by lowering setup overhead while maintaining process reliability and concentricity. Compact, robust construction for reliable precision Weighing approximately 2.8 kg, the set combines a compact footprint with mechanical stability to withstand machining forces during facing and boring cycles. The construction prioritises precision, keeping runout low and allowing tight dimensional control without excessive balancing. The compact design also simplifies storage and transport between machines, making the assembly suitable for both dedicated production lines and versatile job-shop environments. Request the VBHC-NT40-BC2 from Metav Werkzeuge to secure NT-40 compatibility and reliable supply from Emmerich — Metav's consultants can provide technical clarification and delivery details Technical Data Article number: VBHC-NT40-BC2 GTIN: 4061905089435 ECLASS: 21041590 Manufacturer: Vertex Facts Weight: 2.8 kg Diameter range: Ø10–Ø110 mm Collet type: NT-40 Set: yes Special features Face and boring head set Compatible with NT-40 spindles Precision boring and facing Compact, workshop-ready construction FAQ Is the head set compatible with NT-40 spindles? Yes. The VBHC face and boring head set is designed for NT-40 interfaces and fits machines that accept NT-40 tooling. What diameter range can be machined with this set? The VBHC-NT40-BC2 covers a working range from Ø10 to Ø110 mm for both facing and boring tasks. Is the set suitable for production use where repeatability matters? Yes. The combination of a rigid NT-40 collet interface and a compact design delivers consistent concentricity and repeatable bore geometry for serial production. What does the set include? Supplied as a combined facing and boring head set under SKU VBHC-NT40-BC2 for standard NT-40 applications. How heavy is the complete set? Total weight is approximately 2.8 kg, offering a balance between robustness and ease of handling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø110mm Planar and Boring Head Set R8 Collet, Set - Vertex
The combination of R8 compatibility and a wide working range Ø10–Ø110 mm delivers versatile machining options, while the lightweight 2 kg set eases handling in busy workshops. Benefit from the stable clamping interface and compact design—order the set directly via Metav Werkzeuge or consult the Metav advisors for configuration support. VBHC facing and boring head set — R8 interface, suitable Ø10–Ø110 mm (Vertex) The VBHC is a compact facing and boring head set for milling machines, designed for R8 spindle interfaces and suited to precise bore work across a Ø10–Ø110 mm range. Complete facing and boring head set Designed for R8 spindle interfaces Suitable for bores Ø10–Ø110 mm Lightweight total mass 2 kg Precise machining for varied workshop tasks The set provides a facing and boring solution that balances rigidity with adaptability. Designed to handle a broad diameter range, the tooling enables consistent results when facing surfaces or enlarging bores. The combination of a defined collet interface and carefully engineered geometry reduces runout, which translates into improved surface finish and tighter tolerances. For technicians seeking dependable repeatability, this ensemble supports efficient series work and single-part accuracy alike. Robust clamping and easy compatibility A key advantage is the R8 interface, which ensures secure attachment to common milling spindles and simplifies changeovers. The collet-based mounting offers firm radial support and reduced vibration during cutting, improving tool life and process stability. For users less familiar with the terminology: an R8 collet is a standard spindle tapersystem that provides accurate concentricity and straightforward interchangeability. This results in shorter set-up times and fewer adjustments between operations. Workshop efficiency through compact design Weighing just 2 kg, the set is compact enough for convenient handling and storage while remaining substantial enough to provide steady cutting performance. Delivered as a set, the components are intended to cover typical facing and boring requirements without the need for multiple single-purpose heads. Manufactured by Vertex, the set reflects established production standards and is intended to integrate with existing tooling stocks to streamline workflow and reduce downtime. For tailored advice and reliable supply of the VBHC facing and boring head set, contact Metav Werkzeuge in Emmerich—our specialists will recommend the optimal configuration for R8 spindles and workshop needs. Technical Data Article number: VBHC-R8-BC2 GTIN: 4061905084584 ECLASS: 21041590 Facts Weight: 2 kg Suitable bore range: Ø10–Ø110 mm Special features Collet type: R8 Set: yes Brand: Vertex FAQ What materials can be machined with this facing and boring head set? The VBHC facing and boring head set is intended for general milling and boring tasks; compatibility with specific materials depends on cutter selection and machining parameters rather than the head itself. Is the VBHC compatible with my milling machine spindle? Compatibility is ensured where an R8 spindle interface is present; the set is designed for machines accepting R8 collets and tapers. How precise is the concentricity provided by the set? The VBHC-R8-BC2 is engineered for stable clamping to minimise runout, supporting improved concentricity and consistent surface finish during facing and boring operations. Does the set include collets or additional adapters? The delivery comprises the facing and boring head set configured for R8 mounting; specifics on included accessories should be confirmed with Metav Werkzeuge if additional adapters are required. Can this set speed up setup and changeover times? Yes, the compact set format and standard R8 interface reduce changeover complexity, leading to shorter set-up times in mixed-production environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Face and Boring Head Set BT40, Tool Holder Set - Vertex
Benefit from the combination of reliable BT‑40 mounting, a wide machining range and solid construction to maintain consistent cycle times and reduced rework. Order the VBHC facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC facing and boring head set — BT‑40, Ø10–Ø220 mm The VBHC facing and boring head set is a modular machining head for precision facing and internal boring across a broad diameter range on BT‑40 spindles. BT‑40 taper for secure spindle mounting Diameter range Ø10–Ø220 mm for versatility Precise adjustment for repeatable bore sizes Robust 4.7 kg construction for stable cutting Secure mounting that reduces setup time A BT‑40 spindle interface delivers secure mounting and fast machine changeovers, letting workshops keep spindle runout and concentricity within tighter tolerances. The BT‑40 connection is an industry standard on many milling centres and machining centres, which means straightforward integration without special adaptors. With the head’s solid construction and repeatable seating, setup times are reduced and machine uptime improves, supporting predictable production cycles and more efficient scheduling. Broad diameter coverage for fewer tool changes The head set’s Ø10–Ø220 mm working range enables processing of small to large bores without frequent tool swaps, decreasing downtime and handling. For mixed-batch work or toolrooms that deal with varied part sizes, this breadth translates into simpler tooling strategies and fewer changeover errors. The modular nature of the set permits adjustment across the range while maintaining cutting geometry, so workshops can plan jobs more effectively and achieve consistent outcomes across a wider scope of components. Fine adjustment for consistent quality and lower scrap rates The adjustment mechanism is engineered to facilitate precision in bore diameter and face finishing, improving repeatability from part to part. By enabling small, controlled corrections, the head set helps maintain intended tolerances and surface quality, which reduces the need for secondary operations or rework. For applications where dimensional accuracy is critical, this level of control supports predictable first-pass yields and an overall reduction in production costs related to correction and inspection. Stable build for dependable industrial performance Weighing 4.7 kg, the assembly provides the mass and rigidity needed to resist vibration during heavy cuts, contributing to improved surface finish and tool life. The set is supplied as a complete unit for facing and boring tasks, designed for robust shop-floor use and repetitive cycles. Its construction supports stable cutting conditions that are essential for long machining campaigns, offering a balance between durability and the fine control required for precision internal machining. For reliable BT‑40 compatibility and broad Ø10–Ø220 mm capacity, contact Metav Werkzeuge in Emmerich for a tailored technical quote and delivery of the Vertex VBHC facing and boring head set Technical Data SKU: VBHC-BT40-BC3 GTIN: 4061905089121 Manufacturer: Vertex ECLASS: 21041590 Core specifications Weight: 4.7 kg Collet type: BT‑40 Diameter range: Ø10–Ø220 mm Set: yes Special features Designed for facing and internal boring Modular head set Suitable for a wide range of workpiece diameters Robust construction for stable machining FAQ Which spindle taper is required for this head set? The VBHC facing and boring head set requires a BT‑40 spindle taper; the VBHC‑BT40‑BC3 configuration is made for machines with a BT‑40 interface. What diameter range can be machined with the set? The set covers Ø10–Ø220 mm, enabling facing and internal boring across small and medium diameters without frequent tool changes. Is the product supplied as a complete set? Yes, the item is supplied as a set; the VBHC facing and boring head set includes the modular components required for facing and boring operations. How does the head set help with achieving repeatable bore sizes? The adjustment mechanism provides fine, controllable changes to bore diameter, improving precision and repeatability, which reduces rework and scrap. How does the weight influence machining performance? At 4.7 kg the head set offers the rigidity needed to resist vibration, supporting stable cutting conditions and better surface finish during repetitive operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Face And Boring Head Set With MT4 Collet Mount, Set - Vertex
Take advantage of the combination of high-precision finishing, a wide working range and the quick-change MT-4 clamping system for reliable, repeatable machining. Order the set directly via Metav Werkzeuge or consult our specialists for integration advice. Vertex VBHC Facing and Boring Head Set — MT-4 Collet, Ø10–Ø220 mm range The VBHC facing and boring head set is designed to deliver precise internal and face machining across a broad diameter range, ideal for finishing operations in small to medium workshops and toolrooms MT-4 collet system for secure clamping Suitable for Ø10–Ø220 mm operations Compact, robust 4.3 kg construction Delivered as a complete set Accurate finishing with minimal adjustment The set delivers consistent precision for finishing applications by combining a rigid head design with the established MT-4 clamping interface. With a working span from Ø10–Ø220 mm, the assembly reduces the need for multiple specialised tools and enables repeatable results across different job runs. The design focuses on direct benefits for production: fewer setups, lower scrap rates and improved part conformity to tolerances. Where surface quality matters, the head’s construction supports fine feed control and steady cutter engagement for a measurable improvement in finish. Modular configuration that speeds up workflow A modular arrangement allows quick changes between facing and boring functions without complex retooling. The set format brings together components that are matched to one another, shortening setup time and simplifying tool inventory management. For machinists unfamiliar with the specific terms: a facing head machines flat surfaces perpendicular to the spindle axis, while a boring head enlarges or finishes internal diameters—both tasks that benefit from the coordinated adjustments provided by a purpose-built set. This practicality translates into more productive hours on the machine and reduced downtime. Rigidity and balance for improved surface quality Weighing in at 4.3 kg, the assembly provides inherent mass that helps dampen vibration during cutting. Increased stability directly contributes to a better surface finish and extended cutter life, particularly when working at higher feeds or with tougher materials. The balanced construction reduces chatter and improves dimensional control, which in turn supports tighter tolerances and fewer secondary operations. In short, the combined effect is higher throughput with consistent quality — a rational advantage for any production environment. Broad compatibility for diverse workshop tasks Built for integration with MT-4 taper toolholders and spindle setups, the set suits a wide variety of finishing jobs without the complexity of custom fixtures. The Vertex engineering approach ensures the components fit into existing workflows while offering the adaptability required for mixed-batch production. The complete configuration is well suited to toolrooms, maintenance departments and small-scale manufacturing where flexibility and precision must coexist without large investments in special-purpose equipment. For personalised technical advice on the Vertex VBHC facing and boring head set and to arrange procurement through Metav Werkzeuge in Emmerich, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VBHC-MT4-BC3 GTIN: 4061905094217 Manufacturer: Vertex Facts Weight: 4.3 kg Suitable diameter range: Ø10–Ø220 mm Collet type: MT-4 eClass: 21041590 Special features Set configuration SKU: VBHC-MT4-BC3 Gallery images available FAQ What diameter range can be finished with this head set? The VBHC facing and boring head set supports operations across a Ø10–Ø220 mm range, suitable for both small and larger internal bores and facing tasks. Which collet system is required for mounting? The set is designed for the MT-4 collet interface and is compatible with MT-4 toolholders and spindles. Is the set supplied complete for immediate use? The delivery is a complete set configuration (SKU VBHC-MT4-BC3) intended to simplify initial integration and reduce the need for additional matching components. How does the weight affect machining performance? At 4.3 kg, the assembly improves stability and dampens vibration, which helps achieve better surface finish and dimensional repeatability during finishing cuts. Can this set be used for both facing and boring on one machine? Yes, the modular nature of the set allows both facing and boring operations to be carried out on compatible machines without extensive retooling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Face and Boring Head Set, NT-50 Collet System, 3-Point Balance - Vertex
Benefit from the combination of NT-50 collet compatibility, a wide working range of Ø10–Ø220 mm and a compact 6.9 kg design to maintain steady facing and boring operations. Order the VBHC facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC – Facing and Boring Head Set (NT-50, Ø10–Ø220 mm) by Vertex The VBHC is a facing and boring head set engineered for precision metalworking, providing stable clamping for medium‑range diameters and compatible with NT‑50 collet systems for straightforward integration into workshop tooling. NT-50 collet interface Suitable for Ø10–Ø220 mm Delivered as complete set Robust 6.9 kg construction High-precision control for facing and bore finishing The head set delivers focused support for accurate facing and finishing operations through a dedicated NT-50 collet interface and a broad usable diameter band of Ø10–Ø220 mm. These characteristics translate into consistent concentricity and reproducible bores when used for finish machining or corrective facing, reducing the need for rework. The configuration is particularly suitable where stable clamping and minimal runout are required, and the specification is easy to check against inspection equipment to ensure process compliance. Faster setup and reliable repeatability in production Delivered as a complete set, the tooling bundle reduces procurement complexity and simplifies changeovers on lathes or machining centres equipped for NT‑50 tooling. The unit’s 6.9 kg mass contributes to stability during cutting, which supports repeatable surface quality over multiple cycles. By standardising on a single collet interface and a clearly defined diameter range, workshop planners achieve better tool allocation and shorter downtime between jobs, improving throughput without compromising finish. Durable, workshop-ready design for consistent results Built under the Vertex brand, the head set emphasises durability and suitability for routine workshop use. The structural balance between manageable mass and mechanical robustness offers a dependable solution across a range of facing and boring tasks, helping to maintain tool life and steady performance. Where traceability is important, the set is identified by SKU VBHC-NT50-BC3, enabling straightforward inventory control and integration into existing tooling registries. Discuss the integration of the Vertex VBHC head set with Metav Werkzeuge for application advice and reliable supply from Emmerich – contact Metav Werkzeuge by e‑mail or phone to clarify fitment and delivery options. Technical data Article number: VBHC-NT50-BC3 GTIN: 4061905088988 Manufacturer: Vertex Core technical data Weight: 6.9 kg Suitable diameter range: Ø10–Ø220 mm ECLASS: 21041590 Special features Product type: Facing and boring head set Collet interface: NT-50 Delivered as set (satz: true) FAQ What diameter range is covered by the head set? The VBHC facing and boring head set supports diameters from Ø10 to Ø220 mm, making it suitable for a wide range of medium-size bores and facing operations. Which collet interface does the set use and why does it matter? The tooling uses the NT‑50 collet interface; this ensures compatibility with machines and accessories designed for NT‑50 tooling and provides stable clamping for improved concentricity. Is the VBHC suitable for production environments with frequent changeovers? Yes, the VBHC is supplied as a complete set, which simplifies tooling management and shortens setup times, supporting efficient changeovers in production runs. How is the product identified for inventory and ordering? The set is listed under SKU VBHC-NT50-BC3 and GTIN 4061905088988, which can be used for procurement and stock tracking. Which manufacturer produces this head set? The head set is produced by Vertex and supplied with the attributes and identification detailed above for traceability and quality assurance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Face and Boring Head Set, NT30 Collet, Set - Vertex
Take advantage of a compact facing and boring head set that combines an NT-30 collet interface with an adjustable diameter range of Ø10–Ø220 mm for consistent, repeatable results in small-batch and job-shop production. Order the set directly via Metav Werkzeuge or consult the Metav team for application advice and supply from Emmerich. VBHC facing and boring head set with NT-30 interface, adjustable Ø10–Ø220 mm — Vertex The VBHC is a facing and boring head set designed for precision finishing and internal machining on milling machines and machining centres, providing a flexible solution where concentricity and repeatability matter. Adjustable Ø10–Ø220 mm range NT-30 collet interface Set for facing and boring operations Compact 4.1 kg set weight Maintain process accuracy with a proven collet interface The use of an NT-30 collet interface in this assembly ensures a secure mechanical connection to compatible spindles, which improves concentricity and reduces runout during facing and boring operations. By relying on a standardised interface, the tooling set supports repeatable tool positioning and simplifies changeovers on machining centres that accept NT-30 tooling. The clear mechanical advantage is a reduction in rework and faster set-up times, translating into higher throughput for short production runs. Flexible diameter coverage reduces tooling inventory With an adjustable working range from Ø10–Ø220 mm, the kit covers a broad spectrum of internal diameters without the need to purchase multiple dedicated heads. This flexibility allows a workshop to respond to varied component geometries while keeping tool inventory lean. The configuration suits both roughing to establish bore geometry and finishing passes where tool stability and fine adjustment directly contribute to a consistent surface finish and dimensional compliance. Built for rapid changeovers and dependable repeatability The set format is engineered to speed routine operations: modular components and the NT-30 interface allow swift attachment and detachment, limiting machine downtime between jobs. The overall assembly mass of 4.1 kg balances rigidity with manageability, offering a stable platform that resists chatter while remaining straightforward to handle during tool changes. Improved repeatability lowers inspection workload and helps maintain steady production quality across batches. Workshop-ready supply from a precision-focused partner Sourced from Vertex and distributed through Metav Werkzeuge, this facing and boring head set is intended for workshops and specialist engineering shops that demand reliable, versatile tooling. Metav’s role as a “quality filter” for the European market supports consistent product availability and pragmatic delivery from Emmerich, backed by decades of metrology and tooling expertise. The combination of adaptable tooling and a dependable supply chain reduces procurement friction and supports predictable machine shop planning. Choose the Vertex VBHC facing and boring head set for resilient, repeatable machining — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich (info@metav-werkzeuge.com • +49 2822 7131930) Technical Data SKU: VBHC-NT30-BC3 GTIN: 4061905094224 Manufacturer: Vertex Core specifications Weight: 4.1 kg Diameter range: Ø10–Ø220 mm eClass: 21041590 Design & features NT-30 collet interface Set configuration for facing and boring Compact, workshop-suitable assembly FAQ What spindle interfaces are compatible with this facing and boring head set? The set uses an NT-30 collet interface; compatibility requires a spindle or adapter accepting NT-30 tooling to ensure correct mounting and performance. Which diameter range can be machined with the set? The tooling set accommodates bores from Ø10–Ø220 mm, covering common internal diameters for finishing and semi-finish operations. Is this assembly suitable for production use on a machining centre? Yes. The construction and NT-30 interface make the set suitable for machining centres where consistent concentricity and repeatability are required. How heavy is the complete set and what does that imply for handling? The complete set weighs 4.1 kg, offering a balance between rigidity for stable cutting and manageable handling during tool changes. Who supplies this facing and boring head set in Europe? The set is supplied by Metav Werkzeuge and originates from Vertex, offering workshop-focused availability and supply continuity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set BT30, Collet Chuck BC3 Compatible - Vertex
Take advantage of the combination of rigid BT‑30 clamping, a broad Ø10–Ø220 mm working range and a ready-to-fit set for faster changeovers — the result is reliable shop performance and consistent bore quality. Order the set directly via Metav Werkzeuge or consult the team for application advice. VBHC Facing and Boring Head Set (BT‑30) — Ø10–Ø220 mm capacity A VBHC facing and boring head set designed for precision CNC machining and metalworking, compatible with BT‑30 spindles and intended for operations in the Ø10–Ø220 mm range. BT‑30 compatibility for secure spindle clamping Capacity Ø10–Ø220 mm for versatile boring Precision-ground components for accurate results Complete set, ready for workshop integration Firm clamping and repeatable accuracy for serial work The modular head is engineered for consistent precision across repetitive operations. With a BT‑30 collet interface the assembly offers robust spindle-to-tool connection, reducing runout and vibration during cutting. Reduced vibration improves surface finish and extends cutter life, which directly lowers per-part cost in production runs. The compact mass, at 4.34 kg, provides a balance between rigidity and manageable handling during tool changes, helping machine shops maintain tight tolerances without additional fixturing. Broad bore capacity that reduces setup complexity A wide working range of Ø10–Ø220 mm enables both small-diameter finishing and larger reaming or boring tasks without frequent tooling swaps. The configuration of the set simplifies setup: successive operations can be completed with the same centring and alignment, cutting non-productive time. For manufacturers processing mixed batches or prototypes, this flexible capacity shortens throughput times while maintaining geometric accuracy, so fewer tool assemblies are required across varied component families. Designed to keep the machining centre productive The set contains precision-ground components that are matched for concentricity and balance, which contributes to stable cutting conditions and predictable tool life. Balanced assemblies reduce spindle wear and allow for more aggressive feeds when appropriate, translating into improved cycle times. Supplied as a coordinated kit, the product supports organised tooling management in the workshop and reduces the likelihood of mismatched accessories that can cause scrap or rework. Practical applications and maintenance guidance Intended for facing, boring and fine finishing in general metalworking and CNC environments, the set is suitable where structural rigidity and accurate bore geometry are required. Compatibility with standard BT‑30 taper spindles ensures straightforward installation on many machining centres. Routine checks of clamping surfaces and periodic rebalancing after heavy use keep the unit performing reliably. The manufacturer's design focuses on longevity and serviceability, which supports predictable production planning. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VBHC facing and boring head set into existing machine fleets and to arrange supply from our Emmerich stock. Technical data Article number: VBHC-BT30-BC3 GTIN: 4061905088889 Manufacturer: Vertex Weight: 4.34 kg Set: Yes Core specifications Collet type: BT‑30 Working range: Ø10–Ø220 mm ECLASS: 21041590 SKU: VBHC-BT30-BC3 Special features Precision-ground components Workshop-ready kit Compatible with BT‑30 spindles Designed for facing and boring FAQ What machines is this set compatible with? The set is intended for machining centres with a BT‑30 taper; the Vertex VBHC facing and boring head set (SKU VBHC-BT30-BC3) fits standard BT‑30 spindle interfaces found on many CNC machines. Which bore diameters can be produced with the set? The kit covers a working range of Ø10–Ø220 mm, enabling finishing and reaming across a broad diameter spectrum without frequent tooling swaps when using the VBHC set. Does the set include all accessories for immediate use? Yes, the VBHC set is supplied as a ready-to-fit kit containing the matched components required for standard facing and boring tasks, designed to simplify workshop integration. How should the equipment be maintained to preserve accuracy? Regular inspection of clamping faces and periodic rebalancing are recommended to maintain concentricity and performance of the Vertex VBHC facing and boring head set; follow the machine tool manufacturer's maintenance intervals for the spindle interface. Is the set suitable for high-volume production? The precision-ground and balanced nature of the components makes the VBHC set appropriate for serial production where repeatable bore quality and reduced cycle times are priorities. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set R8, Complete Tooling - Vertex
Benefit from precise facing and internal boring with the R8 collet interface and compatibility across Ø10–Ø220 mm, plus a robust workshop weight of 4.2 kg for reliable repeatability; order the VBHC-R8-BC3 directly via Metav Werkzeuge or ask the consultants if needed. VBHC-R8-BC3 Plan and Boring Head Set — R8 collet, Ø10–Ø220 mm — Vertex The VBHC-R8-BC3 is a facing and boring head set engineered for milling applications where accurate face finishing and controlled internal boring are required, compatible with machines using an R8 collet interface. R8 collet interface Compatible with Ø10–Ø220 mm Delivered as a complete set Precise machining where repeatability matters The set is designed to deliver consistent results for facing and internal boring operations, making it suitable for small to medium workshop series. The R8 collet connection provides widely used machine compatibility and a secure spindle interface, while the defined Ø10–Ø220 mm range clarifies the working scope. These measurable parameters support reliable process planning and make tool selection straightforward for production environments focused on tolerances and surface finish. Faster set-up and dependable clamping Quick clamping and predictable alignment reduce machine downtime. The integrated collet interface and the set format minimise the number of tool changes required at the machine, translating into shorter set-up times and more productive spindle hours. The compact mass, of approximately 4.2 kg, balances stability during cutting with manageable handling in the workshop, aiding both manual set-up and automated tool changes. Robust design for everyday workshop use Constructed for routine industrial use, the set combines facing and boring functions in a single kit, helping to streamline the tooling inventory. Sturdy construction supports consistent concentricity and helps to maintain cutting geometry under normal loading. Clear, measurable specifications make it straightforward to plan maintenance intervals and replacement parts, supporting predictable tool life and operational continuity. Contact Metav Werkzeuge for tailored advice on the Vertex VBHC facing and boring head set — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with specific machines or applications Technical Data Article number: VBHC-R8-BC3 GTIN: 4061905092954 Manufacturer: Vertex Facts Weight: 4.2 kg Collet type: R8 Suitable diameters: Ø10–Ø220 mm Special features Delivered as set Facing and boring head functions SKU: VBHC-R8-BC3 FAQ What operations is this set designed for? The VBHC-R8-BC3 set is intended for precision facing and internal boring operations typically performed on milling machines using an R8 collet interface. Which machines is the set compatible with? Compatibility is determined by the toolholder; the set uses an R8 collet interface and therefore fits machines accepting R8 tooling. What is the supported workpiece diameter range? The kit is specified for workpiece diameters in the range Ø10–Ø220 mm, which defines its practical application envelope. Is this delivered as a single package or separate items? The VBHC-R8-BC3 is supplied as a complete set, combining facing and boring head functions for streamlined tooling. How heavy is the set and what does that mean for handling? Weighing 4.2 kg, the set balances robustness and portability, facilitating safe manual handling and stable performance in the spindle. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, BT-50 Collets, 7.7kg - Vertex
Take advantage of the combination of repeatable accuracy, BT-50 compatibility and a wide working range for efficient facing and boring operations; the set’s robust construction ensures stable results and low downtime. Order the VBHC facing and boring head set directly via Metav Werkzeuge or contact our consultants for tailored advice. VBHC Facing and Boring Head Set — BT-50 Interface, Ø10–Ø220 mm A VBHC facing and boring head set designed for precise external facing and internal boring on machines with a BT-50 spindle taper, covering a diameter range of Ø10–Ø220 mm. Precision facing and boring capability Compatible with BT-50 spindle systems Suitable for diameters Ø10–Ø220 mm Robust build; total weight 7.7 kg Engineered for repeatable precision and stable results The facing and boring head set is engineered to deliver consistent machining accuracy, reducing the need for rework. With a rigid BT-50 connection and a balanced design, the assembly minimises runout and vibration that can compromise surface finish. For production environments where component tolerances must be upheld across batches, the set provides a measurable improvement in repeatability; the reduced vibration translates into better tool life and fewer rejects, supporting lean workflows and predictable cycle times. Wide diameter range for flexible workshop use Covering a working span of Ø10–Ø220 mm, the head set simplifies changeovers between small-diameter and larger components without swapping core tooling. This versatility is particularly useful in small-series production and repair shops where one setup must handle diverse parts. The diameter range is presented as an objective specification to help plan operations and tooling strategies: it enables fewer toolholders to be kept in inventory and reduces machine downtime during part changeover, contributing to operational efficiency. Built for durability and straightforward maintenance Constructed as a complete set, the assembly’s robust build and balanced mass (7.7 kg total) support stable cutting conditions under typical workshop loads. The design focuses on accessibility for routine checks and replacement of wear parts, keeping service intervals predictable and maintenance effort low. As a Vertex-supplied solution, the set aligns with professional expectations for long-term performance, making it a pragmatic choice for workshops seeking dependable tooling that integrates with existing BT-50 tooling systems. For professional facing and boring tasks, contact Metav Werkzeuge for the Vertex VBHC set and expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and delivery from our Emmerich quality hub. Technical data Article number: VBHC-BT50-BC3 GTIN: 4061905089442 Manufacturer: Vertex Facts Weight: 7.7 kg Diameter range: Ø10–Ø220 mm eClass: 21041590 Special features BT-50 spindle taper interface Set configuration SKU: VBHC-BT50-BC3 FAQ What machining tasks is this set intended for? The VBHC facing and boring head set is designed for precise external facing and internal boring operations on machines equipped with a BT-50 taper. Which spindle interface does the set use? This head set uses the BT-50 spindle taper, enabling direct mounting on compatible lathes and milling heads. What diameter range does the assembly cover? The assembly supports a working diameter range of Ø10–Ø220 mm, allowing flexible use across small and medium-sized components. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, MT2 Collet Adapter - Vertex
Combine versatile facing and accurate boring capability with MT‑2 collet compatibility to streamline setup and expand machining range. The compact construction and wide Ø10–Ø220 mm capacity make this set suitable for diverse workshop tasks. Order the set directly via Metav Werkzeuge or consult our specialists for integration advice. VBHC-MT2-BC3 Facing and boring head set with MT‑2 collets by Vertex A versatile VBHC-MT2-BC3 facing and boring head set for turning applications, engineered to handle workpiece diameters from Ø10–Ø220 mm with MT‑2 collet compatibility Facing and boring head combination Suitable for diameters Ø10–Ø220 mm MT‑2 collet interface for standard tooling Compact set weight approx 4 kg Accurate faces and bores with reduced setup time The facing and boring combination delivers precision where flat faces and concentric bores are required in one operation. By combining both functions in a single assembly, the setup time is reduced and alignment steps are simplified, which supports more consistent cycle times on the shop floor. The Ø10–Ø220 mm capacity covers small to medium workpieces commonly encountered in general engineering and small-batch production, providing flexibility without constant tool changes. Compact design that fits tight workspaces and tool cabinets A balanced, compact construction allows secure mounting and stable machining while occupying minimal bench or turret space. The MT‑2 collet interface (Morse taper 2) provides compatibility with standard collet tooling and simple replacement, making maintenance straightforward. At approximately 4 kg, the complete set is easy to handle during setup and storage, enabling quicker changeovers and less physical strain for operators. Smooth integration into production workflows and measurable efficiency gains Delivered as a complete set, the assembly reduces procurement complexity and ensures component compatibility from the outset. The combined tool head supports lean machining by lowering fixture complexity and minimising tool inventory. For operations focused on throughput and repeatability, the set contributes to predictable process times and fewer interruptions for tooling swaps. Backed by Vertex engineering, this solution is suited to shops aiming for dependable, long‑term performance. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the Vertex VBHC‑MT2‑BC3 set into your production line and to confirm delivery options Technical Data SKU: VBHC-MT2-BC3 GTIN: 4061905092862 Brand: Vertex Product: Facing and boring head set Core data Suitable diameters: Ø10–Ø220 mm Weight: 4 kg Collet type: MT‑2 Set: Yes Special features Facing function included Boring head function included MT‑2 collet interface Delivered as a matched set FAQ What machining tasks is this set designed for? The VBHC‑MT2‑BC3 by Vertex is designed for facing and boring operations on turning equipment, allowing flat face production and precision bores within the Ø10–Ø220 mm range. Which collets are required for mounting? This set uses an MT‑2 collet interface (Morse taper 2); compatible collets with an MT‑2 shank are suitable for use with the Vertex set. Can the set be used for both small and medium workpieces? Yes. The VBHC‑MT2‑BC3 supports diameters from Ø10 to Ø220 mm, covering a broad spectrum of small to medium parts common in workshops and light industrial manufacture. Is the set supplied as a complete kit for immediate use? The product is delivered as a matched set, which simplifies initial assembly and ensures component compatibility for facing and boring tasks under Vertex specifications. How does this set improve workshop efficiency? By combining facing and boring capabilities in a compact assembly, the set reduces tooling changes and setup time, contributing to steadier cycle times and higher process reliability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, MT‑3 Collet Mount - Vertex
The combination of versatile diameter coverage and a secure MT-3 collet interface ensures reliable facing and boring operations in small and mid-sized workshops; the set's compact 4 kg construction simplifies handling and storage. Order the VBHC face and boring head set directly via Metav Werkzeuge or contact the consultants for tailored advice. VBHC face and boring head set — MT-3 collet interface, Ø10–Ø220 mm The VBHC set provides precision facing and internal turning capability for workshop lathes and machining centres, compatible with MT-3 collets and suited for calipers from Ø10 to Ø220 mm. Precision facing and boring set MT-3 collet interface Suitable for Ø10–Ø220 mm Compact set weight: 4 kg Repeatable precision and faster set-up for turning tasks The face and boring head set is engineered to deliver precision where repeatability matters most. With a secure MT-3 collet interface the tooling maintains concentricity during facing and internal turning, reducing rework and scrap. The modular design of the set allows quick changes between operations, which shortens machine downtime and improves throughput. This results in a measurable efficiency gain for shops that run mixed small-batch production or prototyping work. Broad diameter compatibility supports versatile workshop use Covering a measurement window of Ø10–Ø220 mm, the set adapts to a wide range of component sizes without complex retooling. The delivered configuration as a set bundles the essential components for immediate use and simplifies inventory management. At approximately 4 kg, the assembled kit remains portable enough for bench handling while offering the rigidity required for stable metal cutting operations. Where colleagues require a reliable solution for both facing and internal boring, this kit bridges flexibility and robustness. Engineered for professional integration and reliable supply Built by Vertex, the tooling is designed for integration into standard lathe spindles that accept MT-3 mountings and for workflows that demand consistent results. Procurement through Metav Werkzeuge adds a layer of quality assurance: Metav acts as a European "quality filter" with over 48,000 customers and a comprehensive catalogue, ensuring dependable supply and informed product selection. The combination of manufacturer competence and distributor reliability underpins long-term productivity in industrial and specialist workshops. Contact Metav Werkzeuge in Emmerich for technical guidance or to request the Vertex VBHC face and boring head set directly — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Data Article number: VBHC-MT3-BC3 GTIN: 4061905094200 Brand: Vertex Weight: 4 kg Facts Diameter range: Ø10–Ø220 mm ECLASS: 21041590 Special features Collet type: MT-3 Supplied as set SKU: VBHC-MT3-BC3 FAQ What diameter range is supported by the set? The set supports a diameter range of Ø10–Ø220 mm, as specified for the VBHC face and boring head set. Which collet interface is required for mounting? The tooling uses an MT-3 collet interface; the VBHC set is supplied to fit MT-3 spindles and collets. Is the VBHC suitable for both facing and internal boring? Yes, the VBHC face and boring head set is designed for both facing operations and internal turning tasks. What is the total weight of the complete set? The complete VBHC set has a total weight of 4 kg, facilitating bench handling and storage. Can the VBHC set be integrated into standard workshop lathes? The VBHC set is manufactured by Vertex for integration on machines accepting MT-3 mountings and standard workshop setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, NT40 Collet Interface - Vertex
Benefit from precise facing and boring performance thanks to the combination of an NT-40 taper and a wide Ø10–Ø220 mm working range; the set’s compact 4.7 kg construction delivers stable cutting for repeatable bores. Order the face and boring head set directly via Metav Werkzeuge or consult our advisors for configuration and application advice. VBHC-NT40-BC3 face and boring head set — NT-40, Ø10–Ø220 mm (Vertex) A versatile VBHC-NT40-BC3 set for precision facing and boring on milling spindles with NT-40 taper, designed to cover a broad diameter range for production and toolroom applications. NT-40 taper for rigid mounting Suitable for diameters Ø10–Ø220 mm Set includes facing and boring heads Balanced 4.7 kg assembly for stable operation Stable mounting for repeatable bores and faces The NT-40 interface provides a rigid connection to the machine spindle, reducing runout and improving surface finish during facing and boring operations. The set’s design focuses on dimensional consistency: with a working range of Ø10–Ø220 mm, the tooling minimises the need for multiple dedicated tools, which simplifies tool inventory and shortens changeover time. The compact assembly weight of 4.7 kg helps maintain machining stability without imposing excessive load on the spindle bearings. For users familiar with milling tooling, the head combines conventional boring adjustment with a facing function to deliver accurate, flat surfaces and concentric bores. Faster setup and greater process flexibility Modular tooling in a single set accelerates production planning and reduces fixture complexity. The integrated adjustment mechanisms allow for precise diameter setting and fine tuning, so machining tolerances can be achieved in fewer passes. This leads to improved cycle efficiency and less rework on precision components. The configuration is suitable for general workshop environments and small-batch production, where quick adaptation between facing and boring tasks is required. By covering a wide diameter spectrum, the set supports a variety of components without frequent tool changes, contributing to predictable throughput and stable manufacturing processes. Industrial-grade compatibility and workshop readiness Designed as a complete set for facing and boring tasks, the assembly suits machine shops that require reliable, repeatable results on a broad range of parts. The NT-40 taper is compatible with many vertical and horizontal milling spindles commonly found in European workshops, enabling straightforward integration into existing setups. The tooling is presented as a set to ensure all necessary components are available for immediate use. Confidence in machining results is reinforced by the brand heritage of Vertex and the practical advantages of consolidated tooling: less downtime, consistent finishes and a simpler tooling strategy for procurement and maintenance. For detailed specification checks or to confirm suitability for specific machines, contact Metav Werkzeuge in Emmerich — their specialists can advise on the VBHC-NT40-BC3 set and recommend the optimal configuration for the application Technical data Article number: VBHC-NT40-BC3 Brand: Vertex GTIN: 4061905086700 SKU: VBHC-NT40-BC3 Facts Weight: 4.7 kg Suitable diameter: Ø10–Ø220 mm eClass: 21041590 Special features NT-40 taper mounting Face and boring head set Ready-to-use assembly FAQ What diameter range can be machined with this set? The VBHC-NT40-BC3 face and boring head set covers a working range of Ø10–Ø220 mm, allowing a wide variety of bore sizes to be produced with a single tooling set. Which spindle taper is required for mounting this tooling? Mounting requires an NT-40 spindle taper; the VBHC-NT40-BC3 is built for rigid connection to compatible milling spindles for stable operation. Does the set include components for both facing and boring? Yes, the VBHC-NT40-BC3 is supplied as a set that includes both facing and boring heads to support surface facing and internal diameter machining. What is the overall weight of the tooling assembly? The complete assembly weighs approximately 4.7 kg, which contributes to a stable setup while remaining manageable for handling and installation. Is this set suitable for workshop and small-series production? The VBHC-NT40-BC3, by Vertex, is intended for workshop and production use where flexibility and repeatability are required; the broad diameter range and set format support small-series and mixed-batch machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Facing and Boring Head Set, SK50 Shank - Vertex
Take advantage of precise facing and internal boring with a compact set that covers a wide diameter range and fits SK50 spindles for reduced setup time and consistent results. Order the facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC Facing and Boring Head Set — SK50 interface, Ø10–Ø220 mm (Vertex) The VBHC facing and boring head set is a compact tooling solution for precision face and internal machining, designed for use where reliable concentricity and simple diameter adjustment are required SK50 taper interface for stable mounting Versatile range Ø10–Ø220 mm for bores Precision radial adjustment for fine boring Compact set for facing and internal machining Improved machining accuracy for finishing and bores This head set delivers consistent concentricity and controlled material removal for both facing and internal machining operations. The adjustable head allows incremental radial changes that translate directly into predictable bore sizes, reducing scrap and secondary finishing. By covering a broad working span, the equipment minimises tool changes and supports steady cycle times, which is particularly beneficial in batch production and repair work. The emphasis on precision and repeatability helps maintain component tolerances without complex set-ups. Stable mounting and faster set-up for higher throughput Designed around a robust SK50 interface, the assembly provides a secure connection to the machine spindle, lowering vibration and enhancing surface finish. The SK50 taper offers a standardised mechanical connection that simplifies interchangeability and supports repeatable positioning when swapping tooling. As a set, the solution groups complementary heads and accessories to shorten machine idle time; fewer interruptions lead to a measurable improvement in daily throughput while preserving machining quality. Durable design that supports workshop efficiency Engineered for regular workshop use, the configuration balances ease of operation with long-term serviceability. The set concept reduces the number of separate purchases and centralises tooling for facing and boring tasks, supporting a streamlined inventory. When combined with a reliable supply partner, this approach contributes to operational continuity. The focus on robust interfaces and accurate adjustment supports reduced rework and steady production output, aligning performance with the practical needs of shops and contractors. Contact Metav Werkzeuge to discuss the Vertex VBHC facing and boring head set for SK50 machines and to arrange a technical consultation tailored to specific machining requirements Technical data Article number: VBHC-SK50-BC3 GTIN: 4061905091315 ECLASS: 21041590 Manufacturer: Vertex Set: yes Facts Suitable diameter range: Ø10–Ø220 mm SKU: VBHC-SK50-BC3 Special features Mounting interface: SK50 taper Application: facing and internal boring Brand: Vertex Configuration: set FAQ What diameter range is covered by the head set? The head set covers a working range of Ø10–Ø220 mm, allowing a wide span of internal diameters to be produced without multiple specialised tools. Which spindle interface does the set use? The assembly uses an SK50 taper interface for stable mounting and repeatable positioning on compatible spindles. Is this set suitable for both facing and boring operations? Yes, the Vertex facing and boring head set is designed specifically for combined facing and internal boring tasks in workshop and production environments. How does the radial adjustment affect bore accuracy? Fine radial adjustment enables predictable incremental changes to the bore diameter, improving precision and reducing the need for additional finishing. What indicates that this product is a set rather than a single head? The product is delivered as a set (VBHC-SK50-BC3), which groups complementary components for facing and boring to reduce tool changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Plan- und Ausdrehkopfset, Satz, VBHC - Vertex
Das Set vereint Präzision und Praxisnutzen: Die Kompatibilität mit Messschiebern von Ø10 bis Ø220 mm und die robuste Ausführung sorgen für schnelle Rüstzeiten und wiederholbare Messergebnisse. Bestellen Sie das Set direkt über Metav oder sprechen Sie unsere Beratung an, wenn Sie individuelle Passungen oder technische Details klären möchten. Plan- und Ausdrehkopfset von Vertex Das Plan- und Ausdrehkopfset bietet eine präzise Lösung für Plan- und Ausdreharbeiten an Drehmaschinen und ist für Werkstatt‑ und Serienbetrieb ausgelegt Plan- und Ausdrehkopfset »VBHC« von Vertex Kompatibel mit Messschieber Ø10-Ø220mm Komplettsatz für präzise Ausdreharbeiten Robust und geeignet für Werkstattgebrauch Einfache Montage und wiederholbare Genauigkeit Mehr Präzision bei Plan‑ und Ausdreharbeiten Dank des Sets lassen sich Plan‑ und Ausdrehoperationen mit hoher Präzision ausführen, was Maßhaltigkeit und Oberflächenqualität verbessert. Die Möglichkeit, Messschieber mit Ø10–Ø220 mm einzusetzen, erhöht die Flexibilität bei unterschiedlichen Werkstückdurchmessern. Anwender profitieren von einem durchdachten Aufbau, der das Vermessen und Justieren vereinfacht und dadurch Stillstandszeiten reduziert. Robuste Konstruktion für den täglichen Werkstattbetrieb Die Ausführung des Kopfsets ist auf Dauerbetrieb ausgelegt, sodass Langlebigkeit und Verschleißfestigkeit im Vordergrund stehen. Durch die stabile Bauweise bleibt die Ausrichtung auch bei wiederholten Aufspannungen konstant, was Nacharbeit minimiert. Ein kompletter Satz an Komponenten gewährleistet, dass Ersatzteile und Montage sinnvoll aufeinander abgestimmt sind, damit Prozesse reproduzierbar bleiben. Vielseitiger Einsatz in Fertigung und Instandhaltung Dieses Kopfset eignet sich für Präzisionsdrehen, Feinbearbeitung und das Glätten von Stirnflächen und Bohrungsdurchmessern. Die Kombination aus Ausdrehkopf und adaptierbaren Aufnahmen macht das Set zur geeigneten Wahl für Kleinserien und Prototypenfertigung ebenso wie für Reparaturaufgaben in der Instandhaltung. Anwender erreichen schneller die geforderte Toleranzklasse ohne umfangreiche Nachbearbeitung. Zielgruppe, Effizienz und Time‑to‑Value Entwickelt wurde das System für Werkstätten, den Fachhandel und industrielle Fertiger, die Wert auf wiederholbare Genauigkeit legen. Die ergonomische Handhabung und reduzierte Rüstzeiten erhöhen die Effizienz pro Arbeitsplatz und senken die Stückkosten bei wiederkehrenden Bearbeitungen. Für Einkäufer bietet sich damit eine rentable Investition, die Prozesssicherheit und Produktqualität messbar steigert. Empfehlung: Für wirtschaftliche Präzisionsbearbeitung empfiehlt sich das VBHC‑Set von Vertex als zuverlässige Lösung — sichern Sie diese Präzisionsausrüstung über Metav und nutzen Sie die Beratung und schnelle Lieferung aus Emmerich; bei Rückfragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: VBHC-SK40-BC3 Marke: Vertex Bezeichnung: Plan- und Ausdrehkopfset Serie: VBHC Satz: Ja eClass: 21041590 Daten Geeignet für Messschieber: Ø10-Ø220mm Besonderheiten Satz: Komplettsatz Geeignet für Messschieber: Ø10-Ø220mm UID: VBHC-SK40-BC3 FAQ Welche Durchmesser lassen sich mit dem Set bearbeiten? Das Set ist kompatibel mit Messschiebern von Ø10 bis Ø220 mm, wodurch eine breite Palette an Werkstückdurchmessern abgedeckt wird. Das Plan- und Ausdrehkopfset von Vertex eignet sich damit für viele Standard‑Anwendungen in Werkstatt und Produktion. Für welche Maschinen ist das Set geeignet? Das VBHC‑Kopfset von Vertex (VBHC-SK40-BC3) wurde für den Einsatz an Drehmaschinen konzipiert, die Aufnahmen für Ausdrehköpfe unterstützen. Prüfen Sie die Maschinenschnittstelle auf Kompatibilität vor dem Kauf. Enthält das Set alle benötigten Komponenten für die Montage? Ja, das Plan- und Ausdrehkopfset wird als Komplettsatz geliefert, sodass Montage und Inbetriebnahme mit den beigefügten Teilen möglich sind. Wie verbessert das Set die Prozesssicherheit? Durch die stabile Bauweise und wiederholbare Aufspannungen reduziert das Set Nacharbeit und Nachmessungen, was zu konstanteren Fertigungsergebnissen führt. Die Investition in das VBHC‑Set von Vertex zahlt sich durch geringere Ausschussraten aus. Ist das Set für Serienfertigung geeignet? Das VBHC‑Set ist sowohl für Einzel‑ als auch für Serienfertigung ausgelegt und bietet aufgrund der robusten Konstruktion und der einfachen Handhabung hohe Wiederholgenauigkeit. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10-Ø220mm Planing and Boring Head Set, C-20 Collet Compatible - Vertex
The combination of a wide working range, C-20 collet compatibility and a compact 4 kg set supports efficient shop workflows and consistent bore quality. Benefit from straightforward integration into existing toolholding and a robust design for repeatable facing and boring tasks. Order the VBHC facing and boring head set directly via Metav Werkzeuge or ask our consultants if needed. VBHC Facing and Boring Head Set — Ø10–Ø220 mm, C-20 Collet (Vertex) The VBHC facing and boring head set is a compact toolset for facing and internal turning operations on workpieces with diameters from Ø10–Ø220 mm, compatible with C-20 collets and intended for workshop and small-series production environments Facing and boring head set for versatile machining Suitable for diameters Ø10–Ø220 mm C-20 collet interface for broad tool compatibility Compact set weight 4 kg for easy handling Consistent bore quality through reliable alignment The set is designed to deliver reliable alignment and stable toolholding, which translates into improved repeatability across batches. With the C-20 collet interface, tool clamping is straightforward and compatible with a wide range of collet tooling, reducing changeover time. This mechanical compatibility supports faster set-up and lower machining overheads, making it a practical choice when consistent tolerances are required in facing and boring operations. Flexible diameter range for varied parts and fixtures A working range that covers Ø10–Ø220 mm enables the handling of small to medium bores without frequent retooling. This versatility is particularly beneficial in jobbing shops and maintenance departments where part dimensions vary. The configuration as a set simplifies inventory management: one compact package covers multiple applications, reducing the need for several specialised heads and helping to streamline workshop logistics. Compact handling and integration into existing toolholding Weighing 4 kg, the set is easy to manoeuvre while remaining robust during operation. The compact mass contributes to simpler mounting and improved balance in many spindle arrangements. For machinists seeking predictable results, the combination of modest weight and the C-20 collet standard ensures compatibility with common toolposts and taper systems, supporting smooth integration into existing machining centres and lathes. For tailored advice on specifying and sourcing the Vertex VBHC facing and boring head set, contact Metav Werkzeuge in Emmerich—our specialists provide practical guidance and fast supply for European workshops. Technical data SKU: VBHC-C20-BC3 GTIN: 4061905090967 ECLASS: 21041590 Facts Weight: 4 kg Diameter range: Ø10–Ø220 mm Collet type: C-20 Special features Facing and boring head set Compatible with C-20 collets Compact set for versatile workshop use FAQ What diameter range does the set cover? The VBHC facing and boring head set covers workpiece diameters from Ø10–Ø220 mm, allowing flexible use across small and medium bores. Which collet system is required? The set uses a C-20 collet interface; ensure collets and toolholders match the C-20 specification for secure clamping. Is the set suitable for series production? Yes, the VBHC set is designed for repeatable facing and boring tasks and suits small-series production where consistent alignment and quick set-ups are valued. How heavy is the complete set? The complete set weighs 4 kg, offering a practical balance between robustness and ease of handling. Does the set include both facing and boring heads? Yes, the VBHC is supplied as a set containing both facing and boring heads to cover the intended machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10–34mm Collet Set, 12 Pieces Per Set - Vertex
Reliable workshop performance with precise Ø 10–34 mm clamping and a 12-piece configuration ensures consistent setup times and repeatable results. Combine robust concentricity with broad size coverage for efficient machining and reduced downtime. Order the Vertex V50000 collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex V50000 Collet Set – 12-piece, Ø 10–34 mm A Vertex V50000 collet set designed for secure concentric clamping of round tools and workpieces in general machining and workshop applications Precision concentric clamping for repeatability Diameter range Ø 10–34 mm for versatile use 12-piece set covering common diameters Manufactured by Vertex for proven reliability Consistent concentricity for repeatable machining The collets provide concentric clamping that reduces runout and supports consistent cutting results. By centring tools and workpieces with uniform radial pressure, setup variation is minimised and machining quality is stabilised. This effect is especially relevant when tolerance adherence is critical: tight concentricity leads to predictable part geometry and reduces the need for rework. The construction emphasises precision and repeatable holding force to maintain process stability during batch production. Practical range that improves throughput and flexibility Covering Ø 10–34 mm, the set accommodates common diameters used across many metalworking tasks and consolidates multiple sizes into a single kit. Fewer changeovers are required, which shortens machine downtime and streamlines tool management on the shop floor. The 12-piece configuration means typical intermediate diameters are available immediately, supporting efficient sequencing of operations and faster job changeovers for both small runs and medium-volume production. Durable design for workshop routines and quality assurance Manufactured under the Vertex name, the collets are intended for regular workshop use where dependable clamping and straightforward handling are needed. The design permits secure axial and radial retention without complex adjustments, promoting stable cutting conditions and longer tool life. Where traceability and process reliability matter, the set supports standardised work procedures and helps to maintain consistent output across shifts and operators. For technical advice or to reserve the Vertex V50000 collet set, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and supply details Technical Data Article number: V50000 GTIN: 4061905095702 Brand: Vertex Facts Diameter range: Ø 10–34 mm Pieces per set: 12 ECLASS: 21022190 Special features Complete set of collets Set configuration: yes Packaging: set format FAQ What diameter range does the V50000 collet set cover? The V50000 collet set covers diameters from Ø 10–34 mm and is supplied as a 12-piece kit. How many collets are included in the set? The set contains 12 collets suitable for the specified diameter range. Is this collet set suitable for precision machining? Yes, the V50000 collet set is designed to provide concentric clamping and repeatable holding for precision-oriented workshop tasks. Who manufactures the collet set? The collet set is manufactured by Vertex and supplied under the Vertex V50000 designation. What is the article number and GTIN for ordering? Article number (SKU): V50000 GTIN: 4061905095702 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø130x139mm Shock Absorber M20x100L, 2200 Kg Load Capacity - Vertex
Combining a 2,200 kg load capacity with a compact Ø130×139 mm footprint and an M20x100L threaded connection, this industrial damper delivers dependable energy absorption for production equipment. Secure supply and technical guidance are available through Metav Werkzeuge for seamless integration into existing assemblies. VSA-25K Industrial shock absorber — compact high-capacity damper (M20x100L) The VSA-25K is a compact industrial shock absorber designed for machinery and fixture applications where high load capacity and a small installation footprint are required High load capacity 2,200 kg M20x100L threaded connection Compact Ø130×139 mm footprint Robust 1.76 kg construction Engineered for high-duty absorption and consistent cycle life The damper combines a high maximum load of 2,200 kg with a compact housing to provide effective energy dissipation in tight layouts. A compact Ø130×139 mm envelope reduces space demands on machine beds and fixtures while the standard M20x100L threaded connection allows repeatable mounting with common tooling. This configuration reduces downtime by simplifying replacement cycles and supports continuous operation in production lines where predictable deceleration is essential. The design focuses on measurable performance and long-term operational stability rather than cosmetic features. Straightforward integration with standard machine interfaces Designed for compatibility with common mounting practices, the unit’s M20x100L thread and consistent outer dimensions enable quick installation into existing clamping or guide systems. The relatively light mass of 1.76 kg helps to limit additional dynamic load on moving assemblies, contributing to smoother motion control and less bearing wear. Where space constraints or retrofit projects are a concern, the compact form factor and standardised connection reduce engineering overhead and shorten assembly time, delivering a clear efficiency gain for maintenance teams and production planners. Dependable operation, simple upkeep and procurement certainty Focused on delivering reliable operation, the absorber offers a clear specification set that supports planning and risk assessment: defined maximum load, precise mechanical interfaces and documented dimensions. This transparency helps maintenance and procurement make evidence-based choices, reducing the likelihood of incorrect part selection. For supply and after-sales clarity, procurement via Metav Werkzeuge provides access to a European distribution hub and a technical filter that supports consistent quality across batches, backed by professional advice and logistical reliability. For procurement or technical advice on integrating the Vertex VSA-25K into production equipment, contact Metav Werkzeuge — reliable supply and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VSA-25K GTIN: 4061905092725 Manufacturer: Vertex Facts Max. load: 2,200 Kg Dimensions: Ø130×139 mm Thread: M20x100L Weight: 1.76 kg Special features Compact housing for tight installations Standard threaded connection for repeatable mounting Designed for industrial energy absorption FAQ What is the maximum load capacity of this absorber? The VSA-25K has a maximum load capacity of 2,200 kg, suitable for heavy-duty deceleration applications. Which mounting interface is required for installation? The unit uses an M20x100L threaded connection, allowing installation with standard M20 fittings. What are the external dimensions that determine the installation space? The damper measures Ø130×139 mm, providing a compact footprint for constrained assemblies. Is the absorber suitable for retrofitting existing machines? Yes, the combination of a standard thread and a compact envelope makes the absorber well suited for retrofit use in many production and fixture scenarios. How heavy is the component and what effect does that have on moving systems? Weighing 1.76 kg, the absorber adds limited mass to moving subassemblies, helping to preserve dynamic balance and reduce additional bearing loads. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø2-20mm Collet Set For ER Collets, 18 Pieces - Vertex
Take advantage of the combination of precise clamping across Ø2–20 mm, an 18-piece configuration and proven Vertex build quality to secure consistent machining results; order the collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex V32000 Collet Set – 18-piece, Ø2–20 mm Vertex V32000 collet set for precision clamping across a wide diameter range, suited to general workshop and industrial fixtures Precision clamping Ø2–20 mm 18-piece set for broad diameter coverage Vertex quality for consistent repeatability Comprehensive kit for routine workshop use Consistent accuracy for repeatable results The 18-piece collet set delivers consistent, repeatable clamping across its Ø2–20 mm range, reducing tool runout and variation between runs. This translates into fewer rejected parts and less rework, supporting a steady production flow. The design focuses on secure gripping and even force distribution, which helps maintain concentricity during turning and drilling operations, even when used in mixed batches. Practical coverage that simplifies tooling decisions With a broad diameter span provided in a single 18-piece kit, the set minimises tool change complexity and inventory overhead. The assortment covers small to medium diameters commonly used in general machining, enabling quick selection and reduced setup time. The clear organisation of sizes in the set supports efficient workshop routines and helps maintain throughput during short production series and maintenance tasks. Integration into workshop processes and material versatility Although the set specification concentrates on diameter coverage and piece count, the configuration is designed for straightforward integration with existing chucks and spindles. The result is improved productivity through faster clamping cycles and reliable holding during turning and light milling tasks. For workshops requiring traceable components, the Vertex designation provides a recognised manufacturer reference, supporting procurement and equipment standardisation. Order the Vertex V32000 through Metav Werkzeuge in Emmerich for reliable stock availability and get personalised advice from our consultants at info@metav-werkzeuge.com Technical data Article number: V32000 GTIN: 4061905095689 Brand: Vertex Contents: Ø2–20 mm Facts Diameter range: Ø2–20 mm Pieces per set: 18 Set: Yes Special features Product type: Collet set SKU: V32000 Image file: v08000-main.jpg FAQ What diameter range does the set cover? The collet set covers diameters from Ø2–20 mm, supplied as an 18-piece assortment to span common workshop sizes. Is this set suitable for high-precision turning? Yes, the Vertex V32000 collet set is designed to improve clamping concentricity and reduce runout, supporting precision turning and consistent part quality. How many pieces are included in the kit? The kit contains 18 pieces, offering comprehensive coverage across the specified diameter range for flexible tooling needs. Can the set reduce setup and changeover times? A single, organised 18-piece set simplifies size selection and replacement, which can reduce setup time and streamline small-batch production. Does the set include identification for each size? Sizes are provided across the Ø2–20 mm range; the organised kit format supports quick identification and selection at the bench. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø25xØ11x10mm Ball Tip Attachment For Threaded Rods, Precision Finish - Vertex
Take advantage of the compact ball tip design and precise dimensions for reliable positioning on threaded fixtures; the small footprint and secure contact reduce rework and support smooth assembly operations. Order directly via Metav Werkzeuge or consult Metav’s experts for compatibility and stock information. VSJ-2A Ball-tip Attachment for Threaded Rods – Ø25 x Ø11 x 10 mm (Vertex) VSJ-2A is a compact ball-tip attachment intended for contact and support on threaded rods in clamping and fixturing applications. Compact Ø25 x Ø11 x 10 mm design Ball tip ensures secure contact with threaded rods Robust attachment for workshop clamping Precise contact for consistent positioning The small ball tip provides a defined contact point that improves positional accuracy in clamping fixtures. With overall dimensions of Ø25 x Ø11 x 10 mm, the component occupies minimal space inside assemblies while maintaining a repeatable interface between fixture and workpiece. The spherical contact helps to distribute surface pressure, which can reduce localised wear and contribute to more consistent results during repeated cycles. For production environments where fixture repeatability matters, this accessory supports reliable alignment without adding bulk. Designed for straightforward integration into fixtures Engineered as an attachment for threaded rods, the component fits into standard clamping arrangements where compact support points are required. The simple geometry enables quick insertion into existing setups where the mating thread and seating match the fixture design. Because the part focuses on contact function rather than complex mechanics, it promotes low-maintenance operation and straightforward replacement when routine inspection indicates wear. The design intent is efficient integration, keeping downtime to a minimum through easy handling and uncomplicated mounting. How the ball tip benefits fixture performance A spherical contact point accommodates minor misalignments and angular deviations between components, allowing the clamping system to self-adjust slightly under load. This reduces stress peaks compared with sharp-point contacts and thereby prolongs service life of both the support and the clamped parts. The ball tip also aids in centring and stabilising small components during assembly operations, which can enhance throughput where fine positioning is required. In short, the geometry improves both repeatability and component protection in demanding shop-floor tasks. Typical applications and who will gain most This attachment is suited to machine shops, assembly lines and maintenance workshops that employ threaded rods for clamping, positioning or support. Use cases include short-run fixtures, prototype jigs and general-purpose fixturing where compact, dependable contact points are preferred. The VSJ-2A is especially useful where space constraints are present and a robust, low-profile support is needed to maintain alignment without complex adjustments. For professionals seeking a small yet effective fixture accessory, the product brings predictable performance to everyday clamping tasks. Contact Metav Werkzeuge for stock availability and technical clarification on Vertex ball-tip attachments; Metav Werkzeuge ships from Emmerich and can advise on compatibility and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VSJ-2A GTIN: 4061905089848 Brand: Vertex Dimensions / Measurements Ø25 x Ø11 x 10 mm Design / Application Ball tip Attachment for threaded rods ECLASS: 23110301 Image: vsj-a-detail.jpg FAQ What is the primary function of this attachment? The attachment provides a defined spherical contact point for fixtures; the ball tip improves positional consistency and protects workpiece surfaces during clamping. Which rod types is the accessory compatible with? Compatibility is determined by the mating thread and seating geometry; the component is specified for use as an attachment on threaded rods and its dimensions (Ø25 x Ø11 x 10 mm) should be checked against the fixture. Is the load capacity specified for the VSJ-2A? No explicit load rating is provided in the product data; the design is intended for support and positioning rather than heavy-load bearing—refer to manufacturer specifications for critical load applications. How does the ball tip reduce wear compared with other contact types? The spherical contact distributes pressure over a small area and accommodates slight misalignment, which reduces peak stresses and tends to lower localised wear on both support and workpiece. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø25xØ11x10mm Cone Attachment For Threaded Rods, Tapered Keg, VSJ-5A - Vertex
Benefit from a compact conical interface, precise repeatability and straightforward integration for secure clamping of threaded rods; order the VSJ-5A directly via Metav Werkzeuge or consult our advisors for specification support. VSJ-5A Conical adapter for threaded rods, Ø25×Ø11×10 mm — Vertex VSJ-5A is a conical attachment intended to provide a precise seating and alignment point for threaded rods in fixtures and clamping assemblies. Conical adapter for threaded rods Compact Ø25×Ø11×10 mm footprint Precise, repeatable alignment Compact precision for accurate alignment The conical insert delivers a precision fit that reduces lateral play and improves locating accuracy in clamping setups. With a compact footprint of Ø25×Ø11×10 mm, the component is suitable where space is limited but positional control remains critical. The geometry ensures stable seating of threaded elements, supporting faster machine set-up and fewer re-adjustments, which translates directly into reduced cycle time and improved throughput. Simple compatibility and reliable mounting Designed as an attachment for threaded rods, the conical form provides secure axial guidance and consistent contact geometry during assembly. The small profile simplifies integration into existing fixtures and decreases the need for extensive reworking of mounting points. Where repeatability is required across multiple fixtures, the insert’s shape promotes consistent seating and repeatability, lowering the risk of misalignment-related rejects in production runs. Confidence in procurement and application Classification under EClass 23110301 and the association with Vertex supports straightforward parts management in procurement systems and technical catalogues. The adapter’s clear functional description—conical attachment for threaded rods—facilitates fast inventory decisions and simplifies compatibility checks in multi-supplier environments. For workshops and production facilities seeking dependable, compact locating solutions, this attachment represents a practical option that balances simplicity with technical reliability. For reliable supply and specification advice, contact Metav Werkzeuge in Emmerich; trading enquiries and technical questions can be directed to info@metav-werkzeuge.com or by phone via +49 2822 7131930 — Metav Werkzeuge will assist with orders and integration details. Technical data Article number: VSJ-5A GTIN: 4061905091803 Brand: Vertex Type: Cone EClass: 23110301 Core specifications Dimensions: Ø25×Ø11×10 mm Intended application: for threaded rods Features & compatibility Conical attachment For use with threaded rods Compact design for minimal footprint FAQ What is the primary function of this adapter? The VSJ-5A provides a conical seating point for locating and aligning threaded rods within fixtures and clamping assemblies, improving positional stability. What are the exact external dimensions? Dimensions are specified as Ø25×Ø11×10 mm for the conical adapter. Which applications are suitable for this component? The component is suitable for fixtures and assemblies that require precise seating and repeatable alignment of threaded rods. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø25xØ11x10mm Flat Attachment For Threaded Rods, VSJ-3A - Vertex
Take advantage of the combination of compact design and reliable compatibility for straightforward fixture assembly; order the component directly via Metav Werkzeuge or consult our advisors for specification checks. VSJ-3A – Flat Attachments for Threaded Rods (Ø25 x Ø11 x 10 mm) by Vertex A VSJ-3A flat attachment designed for secure mounting on threaded rods in assembly and fixture applications. Flat profile for minimal assembly height Dimensions Ø25 x Ø11 x 10 mm Designed for threaded-rod mounting Vertex quality for consistent production Precision flat attachment for threaded-rod assemblies The VSJ-3A functions as a compact flat attachment engineered to simplify fixture building and small-part assemblies. Its low-profile form reduces stacking height, enabling denser component layouts and improved accessibility in confined assemblies. The design supports repeatable alignment when combined with threaded fasteners, contributing to faster setup times and fewer adjustment cycles in production environments. Emphasis is placed on stable seating and predictable behaviour under normal assembly conditions, which helps to streamline workflow and maintain consistent assembly quality. Compact dimensions that free up installation space With its Ø25 x Ø11 x 10 mm specification, the component is intended for installations where space is limited but secure connection is required. The three-part dimension notation indicates overall diameter, central bore diameter and axial thickness, a format commonly used to verify fit against threaded-rod sizes and neighbouring parts. The compact format makes it suitable for jigs, holding fixtures and light-duty brackets where maintaining a slim profile matters. Clear dimensional data supports rapid compatibility checks during planning and reduces the need for trial fittings on the shop floor. Simple integration and traceable quality for workshops Traceability and part identification are supported by the GTIN and SKU, facilitating inventory control and reordering within established procurement systems. As a Vertex-made part, the attachment aligns with professional workshop standards for repeatability and production consistency. Its straightforward geometry allows for efficient stocking and modular use across multiple fixtures. Where repeat procurement and batch conformity are critical, the item’s documented identifiers make it easier to manage supplies and to integrate the part into an organised workflow. Acquire the VSJ-3A through Metav Werkzeuge for dependable supply from Emmerich and expert advice on integration into existing fixtures Technical data Article number: VSJ-3A GTIN: 4061905090790 Designation: Attachments for threaded rods Type: Flat Dimensions: Ø25 x Ø11 x 10 mm eClass: 23110301 Manufacturer: Vertex Facts Dimensions: Ø25 x Ø11 x 10 mm GTIN: 4061905090790 eClass: 23110301 Special features Designed for threaded-rod mounting Flat type geometry Brand: Vertex SKU: VSJ-3A FAQ What is the VSJ-3A intended for? The VSJ-3A is intended as a flat attachment for mounting on threaded rods, used in jigs, fixtures and light assembly tasks where a low-profile connection is required. What are the exact dimensions of the component? Dimensions are given as Ø25 x Ø11 x 10 mm, indicating overall diameter, central bore diameter and thickness for straightforward compatibility checks. Is the part traceable for procurement and inventory systems? Yes, the component is listed with GTIN 4061905090790 and SKU VSJ-3A for reliable identification and reordering within inventory systems. Which brand manufactures this attachment? This attachment is manufactured by Vertex; the product aligns with the manufacturer’s standards for workshop components. Can the VSJ-3A be used across different fixture types? The flat geometry and central bore make the VSJ-3A adaptable to a range of fixture and bracket designs that accept the specified bore and outer diameter. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø25xØ11x10mm Flat Taper Attachment for Threaded Rods, VSJ‑6A - Vertex
Take advantage of the combination of flat-cone centring, compact Ø25xØ11x10mm dimensions and clear traceability for dependable assembly processes. Order the VSJ-6A directly via Metav Werkzeuge or consult our specialists for procurement advice. VSJ-6A Thread-rod Attachment — Flat Cone Profile by Vertex VSJ-6A is a precision thread-rod attachment featuring a flat-cone profile for accurate centring in assembly and fixturing tasks Flat-cone profile for precise centring Compact Ø25xØ11x10mm dimensions Compatible with standard threaded rods Secure, repeatable centring for threaded assemblies The flat-cone geometry provides a defined contact form that improves axial alignment when used with threaded bars and fixture setups. With the compact Ø25xØ11x10mm footprint, the component delivers a small but effective locating function, reducing wobble and enabling more consistent positioning. This benefits assembly repeatability and reduces rework, so processes run more efficiently and with measurable quality gains. Practical handling and workshop integration Designed for straightforward integration into workshop tooling, the adapter head simplifies inventory and reduces setup complexity. Its profile suits many common holding and locating tasks where a low-profile locating element is required. Supplied by Vertex and distributed via Metav, the part is intended for industrial and trade environments that value reliable sourcing and practical usability on the shop floor. Procurement-ready identification for smooth logistics Procurement and quality systems benefit from clear identifiers: SKU VSJ-6A, GTIN 4061905091858 and ECLASS 23110301 are provided for unambiguous ordering, stock control and classification. These identifiers support fast catalogue searches, ERP integration and traceability across supply chains, helping purchasers and planners to standardise components and reduce administrative friction. Contact Metav Werkzeuge for Vertex VSJ-6A thread-rod attachments — expert advice and reliable supply from Emmerich for precision workshop needs Technical Data Article number: VSJ-6A GTIN: 4061905091858 ECLASS: 23110301 Article name: Attachments for thread rods Type: Flat cone Dimensions: Ø25xØ11x10mm Facts SKU: VSJ-6A GTIN: 4061905091858 ECLASS: 23110301 Dimensions: Ø25xØ11x10mm Special features Flat-cone locating profile For threaded rods Manufacturer: Vertex Compact locating footprint FAQ What are the exact dimensions of this attachment? The VSJ-6A thread-rod attachment measures Ø25xØ11x10mm, giving a compact locating element suitable for constrained assemblies. Which identification codes assist procurement? The product is listed under SKU VSJ-6A, GTIN 4061905091858 and ECLASS 23110301, enabling straightforward ordering and ERP integration. What locating function does the flat-cone profile provide? The flat-cone shape concentrates contact to a defined cone surface, improving axial alignment and repeatability when used as a locating head on threaded rods. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com