Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
159x684x148mm Hydraulic Machine Vice 0–310mm Opening 50 kN Clamping Force 0.01mm Accuracy - Vertex
Benefit from robust hydraulic clamping combined with a 50 kN clamping force and a wide 0–310 mm opening range for reliable, repeatable results on the shop floor. Order the vice directly via Metav Werkzeuge or consult our specialists for integration advice. VNC-160H Hydraulic machine vice — 50 kN clamping force, 0–310 mm opening (Vertex) The VNC-160H is a hydraulic machine vice engineered for precise, repeatable clamping in milling machines and machining centres. Hydraulic actuation, 50 kN clamping force Opening range 0–310 mm Accuracy to 0.01 mm Cast-iron body for vibration damping Reliable clamping for consistent machining The hydraulic actuation of the VNC-160H ensures hydraulic actuation with a steady, controllable force that reduces slippage and rework. With a rated 50 kN clamping force the vice provides a secure hold for heavy-duty operations, which translates into higher throughput and fewer interrupted production cycles. Hydraulic clamping eliminates the variability of manual tightening, so fixture repeatability is improved and cycle times are more predictable. Stable construction to reduce vibration and tool wear A cast iron body combined with a compact footprint delivers substantial mass where it matters. The vice’s overall 63 kg weight and solid construction promote vibration damping during cutting, which helps protect tool edges and improves surface finish. Stability from the vice body means less need for compensating process variables, supporting longer tool life and more consistent part quality in everyday production. Precision that supports tight tolerances Designed for precision work, the vice achieves an accuracy 0.01 mm, enabling reliable positioning for fine-detail milling and drilling. The 0–310 mm opening range accommodates a broad spectrum of workpiece sizes while maintaining clamping accuracy. For shops that measure success in repeatable tolerances, the combination of fine positional accuracy and robust clamping allows predictable results without elaborate fixturing. Straightforward integration and low maintenance Engineered as a dedicated clamping solution for machine tools, the vice offers a low maintenance approach: robust seals and a simple hydraulic interface minimise routine attention while keeping downtime low. The robust design supports retrofit into existing setups or incorporation into new machine cells; standard mounting provisions and a compact footprint ease installation planning. The vice is suited to continuous use in demanding environments where reliability and uptime are priorities. Contact Metav Werkzeuge to discuss how the VNC-160H’s 50 kN clamping force and precision design can be integrated into current production workflows — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: VNC-160H GTIN: 4061905088292 Type: Hydraulic ETIM: EC002173 Facts Opening: 0–310 mm Clamping force: 50 kN Accuracy: 0.01 mm Weight: 63 kg Dimensions: 159 x 684 x 148 mm Special features Body material: Cast iron Actuation: Hydraulic Application: Machine vice / Clamping technology SKU: VNC-160H ECLASS: 21020601 FAQ What clamping force does the vice deliver? The VNC-160H provides a clamping force of 50 kN, designed for secure holding during heavy milling and drilling operations. Is the VNC-160H suitable for high-precision work? Yes. With an accuracy of 0.01 mm the VNC-160H supports tight tolerances required in precision machining and fine finishing tasks. What are the vice’s main dimensions and weight? The vice measures 159 x 684 x 148 mm and weighs 63 kg, offering a compact yet stable platform for machining operations. Does the vice require a hydraulic supply? The VNC-160H is a hydraulic vice and requires a hydraulic actuation source; integration with a machine’s hydraulic system or an appropriate pump is necessary. What material is the vice body made from? The body is cast iron, chosen for its mass and damping characteristics that improve stability and surface finish during cutting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
15mm 5C Collet, Accuracy 0.02mm, 87mm Length - Vertex
Benefit from the combination of precision clamping, standard 5C compatibility and a compact 15 mm bore for consistent cycle times and reduced setup variance. Order the collet directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 5C-15 Collet — 15 mm diameter, 0.02 mm accuracy (Vertex) The 5C-15 Collet is a precision clamping component for machine-tool spindles and lathe workholding, designed to secure round shank tools and workpieces with reliable concentricity. 5C standard for broad tool compatibility 15 mm nominal clamping diameter 0.02 mm concentricity tolerance Compact length: 87 mm for tight setups Consistent accuracy for repeatable production A compact clamping solution that delivers repeatable precision: the collet offers a declared accuracy of 0.02 mm, which minimises runout and supports tighter tolerances in turning and light milling operations. The proven 5C standard ensures compatibility with a wide range of chucks and fixtures, reducing the need for multiple adapters and shortening changeover times. This enhances process stability and improves first-pass yield. Simple integration into existing toolholding systems Designed for straightforward installation into existing 5C chucks, the component combines a compact length with a robust clamping form to fit constrained setups without sacrificing grip. The nominal 15 mm diameter provides a common clamping size for many tool shanks and pilot diameters, enabling efficient inventory management and fewer toolholders on the bench. Easy interchangeability supports faster tooling swaps and predictable machine utilisation. Reliability and handling that support workshop workflows Manufactured to consistent tolerances, the collet promotes reliable clamping across repetitive cycles, reducing rework and inspection time. The balanced geometry contributes to stable rotation and reduced vibration at moderate spindle speeds, which can extend tool life and improve surface finish. For maintenance, standard cleaning and light lubrication of the clamping taper preserves performance and concentricity over long service intervals. Application advice and selection guidance For demanding positioning tasks or when maximal concentricity is required, pairing this collet with properly rated chucks and routine inspection is recommended. The 5C-15 Collet suits general-purpose turning, light milling and holding of cylindrical components; for specialised materials or extreme feeds consult the technical team to confirm suitability and recommended operating parameters. For reliable high-precision workholding, contact Metav Werkzeuge for tailored advice on the Vertex 5C-15 collet and secure the correct clamping solution for the workshop. Technical Data SKU: 5C-15 GTIN: 4061905088407 ECLASS: 21041712 Manufacturer: Vertex Core specifications Diameter: 15 mm Length: 87 mm Accuracy: 0.02 mm Weight: 0.21 kg Special features Type: 5C collet Standard 5C clamping interface Compact form for constrained set-ups Precision clamping tolerance FAQ What machines are compatible with this collet? The 5C-15 collet fits machine spindles and chucks designed for the 5C standard; the Vertex 5C-15 collet is intended for holders and chucks conforming to 5C interfaces. What does the 0.02 mm accuracy mean in practice? An accuracy of 0.02 mm indicates the maximum expected runout under correct mounting; the Vertex 5C-15 collet helps maintain concentricity for consistent machining quality. Is the collet suitable for heavy-duty milling? The 5C-15 collet is intended for general workholding and light to moderate cutting loads; for heavy milling applications, consider specialised heavy-duty toolholding systems. How should the collet be maintained to retain precision? Regular cleaning of the clamping surfaces and light lubrication of the spindle taper preserve the concentricity and performance of the Vertex 5C-15 collet. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
15mm Centre Point Slim Extended Live Centre MK3 60° 0.008mm Runout 7000min⁻¹ 340kg Capacity 34mm Body - RÖHM
The combination of precise runout control and an extended tip offers dependable support for long, slender turnings while maintaining high surface quality and operational safety; Order the (Slim live centre MK3 with extended tip, RÖHM) directly via (Metav Werkzeuge) or ask our consultants if needed. Slim live centre MK3 (extended tip) – 60° precision point, Morse taper 3, RÖHM Slim live centre MK3 (RÖHM) delivers concentrated, deep-reaching support for turning applications where access and concentricity are critical. Extended tip for deep support 60° precision point for concentric seating Morse taper 3 spindle interface Runout ≤ 0.008 mm for high accuracy Improve turning accuracy with low runout and high rotational capacity The Slim live centre MK3 is designed to raise process reliability by combining a runout tolerance of 0.008 mm with a rated rotational speed of 7,000 rpm. This combination reduces wobble and vibration at speed, which in turn improves repeatability and surface finish when turning slender components. In practice, a low runout value translates into less rework, fewer rejects and a clearer path to consistent concentricity across production batches. For workshops focusing on precision turning, these measurable performance parameters underpin machining stability and predictable outcomes. Reach deeper into components with a slim projection and precise tip geometry The extended tip and slim body enable support of long or narrow workpieces without obstructing tool access. With a projection of 74 mm, a tip length of 32 mm and a centred point diameter of Ø15 mm, the centre provides a secure seat for axially long parts while the 60° point ensures correct centring in standard lathe centres. The Morse taper 3 mounting assures compatibility with common lathe tailstocks and adapters, while the shaft diameter of 23.825 mm offers a stable fit. These dimensions allow machinists to maintain rigidity close to the workpiece, reducing deflection and improving dimensional control on delicate geometries. Integrate smoothly into workshop workflows for robust, repeatable results Built for everyday use in industrial and small-batch environments, the centre’s body diameter of 34 mm and moderate mass (approx. 0.46 kg) make it easy to handle and fit without adding unnecessary inertia to the tailstock assembly. With a rated static support of 340 kg for the workpiece, the design balances capacity and precision, making it suitable for a wide spectrum of turning tasks where controlled support is required rather than heavy-duty bearing loads. The component’s characteristics favour quick changeover and predictable performance, supporting leaner setups and shorter cycle times while preserving part quality. For tailored advice on spindle compatibility or to place an order with Metav Werkzeuge, request a technical consultation with our specialists who will confirm fitment and delivery options. Technical data Article number: 4000832085NW Brand: RÖHM Product type: Live centre Core specifications Tip diameter: 15 mm Tip angle: 60° Projection: 74 mm Tip length: 32 mm Body diameter: 34 mm Shaft execution: Morse taper 3 (MK3) Shaft diameter: 23.825 mm Max rotational speed: 7,000 rpm Max workpiece weight: 340 kg Max runout: 0.008 mm Weight: 0.46 kg Features Slim extended running tip for deep support Precision point for concentric seating Suitable for standard MT3 tailstocks Compact body for improved access SKU for ordering and reference: 4000832085NW FAQ Is this centre compatible with MT3 tailstocks? The Slim live centre MK3 uses a Morse taper 3 shaft execution, so it is compatible with standard MT3 tailstocks and adapters. What rotational speeds are permissible with this live centre? This live centre is rated for up to 7,000 rpm under the specified runout and loading conditions. How much axial support can the centre provide? The centre is specified with a maximum supported workpiece weight of 340 kg for static support situations. What concentricity can be expected when mounted correctly? When mounted and run in under correct conditions, the device offers a maximum runout of 0.008 mm, enabling high repeatability and improved surface finish. Which part dimensions help with deep-turning applications? A projection of 74 mm combined with a 32 mm tip length and a slim tip diameter of Ø15 mm enables access into narrow and long workpieces while maintaining support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Centre Point Slim MK3 With 60° Tip, Max 7000 min⁻¹; 0.005mm Runout - RÖHM
Take advantage of the combination of high rotational capability, minimal runout and a slim profile for interference-free turning. Benefit from a secure Morse taper MT3 fit and robust centring performance at speeds up to 7,000 min⁻¹ — order directly via Metav Werkzeuge or consult the Metav team for application support. RÖHM Slim Centre MK3 — 60° 15 mm, MT3 The RÖHM Slim Centre MK3 is a slim lathe centre designed to provide precise axial locating and reliable support for turning and finishing tasks on a wide range of workpieces. 60° conical point for standard centring Runout ≤ 0.005 mm for high repeatability Supports workpieces up to 400 kg Morse taper MT3 shank for secure fit Precise centring for repeatable turning accuracy The slim centre delivers measurable precision thanks to a runout ≤ 0.005 mm, which reduces eccentricity and improves part consistency across batches. With a 60° point angle and a defined 15 mm tip form, the component provides stable bearing contact for axial locating; the result is improved repeatability and fewer scrap parts. For production environments where dimensional conformity matters, the combination of low runout and a compact tip geometry supports tight tolerances without complex setup. Secure mounting and fast spindle capability for efficient workflows Fitting into a Morse taper MT3 socket, the centre offers an industry-standard connection that ensures concentricity and easy exchangeability. The unit is rated to a max. speed of 7,000 min⁻¹, enabling higher throughput on suitable machines while maintaining stability. The specified shaft diameter of 23.825 mm and a compact 34 mm housing allow straightforward installation in common toolholders and adaptors, keeping machine downtime to a minimum and supporting streamlined changeovers. Slim design that reduces interference and simplifies handling The slim housing and short point length of 18 mm minimise obstruction around the workpiece, improving accessibility for cutting tools and coolant flow. Weighing 0.4 kg, the centre is easy to handle and position yet solid enough to offer dependable support during turning operations. The compact profile is particularly advantageous for tasks on small-diameter or closely spaced features, where space is limited but centring precision remains essential. Built for medium-duty workpieces and diverse turning tasks Designed for a maximum supported workpiece mass of 400 kg, this centre is suitable for a range of medium-duty turning applications, from component finishing to pre-machining support. The specified housing diameter 34 mm and the slim tip geometry work together to maintain alignment under load, while the reliable mechanical design helps reduce the need for frequent adjustments. For shops seeking a robust, easy-to-fit centring solution, the product offers a pragmatic balance of capacity and precision. Contact Metav Werkzeuge for tailored application advice and to arrange procurement of the RÖHM Slim Centre MK3 with MT3 shank; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical Data Article number: 4000832076NW Manufacturer: RÖHM Product type: Centring point Type: Slim Shaft design: MK3 Packaging unit: 1 Core specifications Diameter: 15 mm Shaft diameter: 23.825 mm Overhang (projection): 62 mm Weight: 0.4 kg Tip angle: 60° Max. speed: 7,000 min⁻¹ Max. workpiece weight: 400 kg Runout max.: 0.005 mm Housing diameter: 34 mm Point length: 18 mm Special features Morse taper MT3 shank Slim profile for reduced interference 60° conical point for standard centring Robust centring performance for medium-duty turning Compact, easy-to-handle design FAQ What taper does this centre use and how secure is the fit? The RÖHM Slim Centre MK3 employs a Morse taper MT3 shank for a secure mechanical fit; the standard taper ensures reliable concentric retention in MT3 sockets and common adaptors. What rotational speed and load limits apply to the centre? Rated maximum speed is 7,000 min⁻¹ and the centring point supports workpiece masses up to 400 kg, providing appropriate performance for many medium-duty turning tasks. How precise is the centring performance in practical terms? The unit is specified with a runout max. of 0.005 mm, a tolerance level that contributes to consistent part geometry and reduced rework in serial production. Which features reduce interference with cutting tools during operations? The slim housing, 34 mm housing diameter and 18 mm point length minimise obstruction around the work area, improving tool access and coolant delivery during machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm ER Collet Precision Clamping, 5 µm Runout, L 40mm - TECWERK
Take advantage of the proven combination of DIN 6499‑B compatibility, precise 15 mm clamping, and a secure hold along the full clamping length for consistent machining results; order via Metav Werkzeuge or request guidance from the consultants. TECWERK ER collet ER 32/470 E — 15 mm clamping diameter, DIN 6499‑B The TECWERK ER collet ER 32/470 E is a precision clamping collet for ER‑style collet chucks, engineered to secure tools along the entire clamping length in machining operations. DIN 6499‑B standardised profile Holds tools along full clamping length Runout and repeatability 5 µm Clamping diameter 15 mm nominal Secure precision for repeatable machining The collet conforms to the DIN 6499‑B profile, which ensures a defined interface to ER‑type chucks and consistent contact geometry. That standardisation, together with a specified runout and repeatability of 5 µm, reduces vibration and tool deflection, translating directly into improved surface finish and tighter dimensional control. The result is fewer rejects and less rework, making the clamping solution a rational choice for production environments where accuracy and throughput matter. Built for compatibility and straightforward integration Designed to engage with ER collet chucks, this clamping element accepts a 15 mm tool shank and offers an external form that matches common ER systems. With a length of L: 40 mm and an outer diameter of D: 33 mm, the geometry permits reliable seating in standard holders without requiring intermediate sizes. Because the tools are held along the full clamping length, stability is increased and sensitive tools can be clamped on the lead chamfer where necessary, simplifying setup and reducing handling time. Faster setup and predictable clamping range The collet bridges a clamping range described as the nominal diameter minus 1.0 mm; this clamping diameter bridging characteristic allows slight variations in shank size to be accommodated without changing the collet. That flexibility shortens machine downtime during tool changes and supports a steady production rhythm. The combination of secure axial grip and defined radial contact ensures predictable tool runout over repeated cycles, helping planners and operators to rely on stable process windows. Practical reliability for everyday workshop use Although tailored for ER‑style systems, the component’s design focuses on practical workshop demands: consistent repeatability, simple interchangeability and sturdy engagement with the tool shank. The specification supports a wide range of routine milling and drilling tasks where axial stability and radial precision are required. For businesses seeking accessible precision, this collet aligns with the ethos of supply partners who prioritise dependable stock and quality control. For tailored advice on integrating the TECWERK ER collet ER 32/470 E into existing ER tooling systems, contact Metav Werkzeuge in Emmerich for technical consultation and prompt supply assistance Technical data Article number: 2000832952NW Product type: ER collet Label: Spannzange Typ ER 32/470 E Spann‑D.15mm TECWERK Packaging unit: 1 Numbers Clamping diameter (d): 15 mm Length (L): 40 mm Outer diameter (D): 33 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal minus 1.0 mm Special features Standard: DIN 6499‑B Suitable for ER collet chucks; no intermediate sizes required Tools held along whole clamping length; clamping possible on lead chamfer Matches ER 32/470 E specification FAQ What tolerance can be expected for runout with this collet? The specified runout and repeatability for the TECWERK ER collet ER 32/470 E is 5 µm, providing a reliable baseline for precision machining. Can the collet compensate for slight variations in tool shank diameter? Yes. The clamping diameter bridging feature (nominal minus 1.0 mm) allows the collet to accommodate small shank deviations without replacing the collet. Is this collet compatible with standard ER chucks? The collet is manufactured to the DIN 6499‑B form and is suitable for use with ER‑style collet chucks that accept the ER 32/470 E specification. What are the key dimensions to check for holder compatibility? Relevant dimensions are d = 15 mm, L = 40 mm and D = 33 mm; these determine seating and axial engagement in the holder. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
15mm ER25 Collet Set 2–16mm Clamping Range, 15-Piece Wooden Case - TECWERK
Benefit from the combination of 5 µm repeat accuracy and a 2–16 mm clamping range that reduces rework and speeds tool changes; the compact wooden storage block keeps all items organised for repeatable results. Order the TECWERK ER 25 collet set directly via Metav Werkzeuge or ask our consultants if needed. TECWERK ER 25 (430 E) Collet set — 15-piece, 2–16 mm clamping range TECWERK ER 25 (430 E) — a collet set designed for secure tool holding in workshop and light production applications ER 25 collet system compatibility Clamping range 2–16 mm Roundness and repeat accuracy 5 µm Supplied in a solid wooden block Improve machining consistency with repeatable clamping accuracy High-precision tool holding directly reduces scrap and rework. The ER 25 collet configuration offers a broad 2–16 mm clamping range, enabling standardisation across common small-diameter tooling. With a documented roundness and repeat accuracy of 5 µm, the assembly supports tighter tolerances and predictable results on milling and drilling spindles. This level of control translates into fewer part rejections and lower downtime for remeasurement, delivering a measurable improvement to production efficiency. Faster changeovers and better organisation on the bench A well-ordered toolset shortens set-up times. The set is supplied in a solid wooden block that keeps the components accessible and protected between shifts. Clear arrangement of the 15 pieces minimises search time and reduces the risk of misplacing sizes, which supports faster changeovers. For workshops aiming to increase throughput without investing in new machines, a compact, organised collet set provides practical gains in day-to-day operation and ergonomics at the machine station. Durable compatibility for routine workshop use The ER 25 (430 E) designation indicates compatibility with standard ER collet chucks and most ER25 spindles, helping to preserve tool concentricity under load. The included collets cover sizes from 2 mm to 16 mm in single-millimetre increments, which suits a wide range of small-diameter cutters and holders. Robust construction and precise gripping behaviour reduce slippage during conventional and higher-feed operations, meaning fewer interruptions and safer handling for operators. Practical benefit for maintenance and calibration regimes A repeatable clamping system simplifies quality workflows: consistent tool runout assists in quicker verification of fixtures and cutters during inspection rounds. The 5 µm repeatability helps to keep measurement checks stable, easing the burden on calibration schedules. For maintenance teams, a standardised ER 25 collet set streamlines inventory and replacement planning, while the wooden storage base provides a secure location to log and manage tooling condition between preventive maintenance cycles. Contact Metav Werkzeuge for tailored advice and to request availability of the TECWERK ER 25 15-piece collet set; our specialists at Metav Werkzeuge can recommend the right configuration for specific machine interfaces and production needs. Technical data Article number: 2000832782NW Model: ER 25 (430 E) Product type: Collet set Manufacturer: TECWERK Facts Dimensions: 195 x 25 x 150 mm (L x W x H) Clamping range: 2–16 mm Content: 15 pieces Roundness / repeat accuracy: 5 µm Packaging unit: 1 Special features Supplied in wooden storage block Includes collets 2–3–4–5–6–7–8–9–10–11–12–13–14–15–16 mm Suitable for ER 25 collet chucks Model designation: ER 25 (430 E) FAQ What clamping sizes are included in the set? The set includes collets in single-millimetre increments from 2 mm up to 16 mm, covering a wide range of common small-diameter tooling for ER 25 applications. Is the set suitable for standard ER 25 chucks? Yes, the TECWERK ER 25 (430 E) collet set is designed for compatibility with standard ER 25 collet chucks and will integrate with matching spindles and chucks. How accurate is the clamping and runout performance? The assembly is specified with a repeat accuracy of 5 µm, which supports consistent concentricity for precision machining and reduces variation between tool changes. How is the set supplied and stored? The collets are supplied in a solid wooden storage block that organises each size and protects the tools from damage when not in use. Can this set reduce changeover times at the machine? Yes, the organised layout and full coverage of common diameters help to shorten changeover and set-up times, improving overall workshop throughput. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
15mm Hexagon Nut DIN 6330B M10 Strength Class 10, SW17 - AMF
Take advantage of a compact, standard-compliant fastening solution that combines M10 compatibility with strength class 10 for robust joints; order the component directly via Metav Werkzeuge or consult our specialists for quick supply and industrial guidance. Hexagon nut DIN 6330B M10 – Strength class 10, SW 17 mm (AMF) A hexagon nut DIN 6330B M10 designed for high-tensile mechanical connections in industrial and maintenance applications. DIN 6330B standardised fastening Strength class 10 for high tensile loads SW 17 mm for use with standard spanners 15 mm overall height for compact assemblies Secure connections for high-load applications The strength class 10 rating marks this fastener as suitable where elevated tensile strength and reliable clamping force are required. Specified to the DIN 6330B standard, the component ensures a predictable mechanical performance that integrates with established bolt grades and assembly procedures. For engineers and buyers, this means fewer unexpected failures and a measurable improvement in joint safety without altering existing bolting practices. Time-saving compatibility and straightforward assembly With an M10 thread size and SW 17 mm key width, the nut mates with commonly used bolts and hand tools in workshops and production lines. The hexagon geometry provides a secure interface for spanners and sockets, reducing slippage and assembly time. The defined corner dimension 18.9 mm and standardised profile simplify inventory planning: one specification fits multiple applications, lowering complexity across maintenance schedules. Compact design for constrained installations An overall height of 15 mm affords a compact profile that suits installations with limited axial space while retaining the mechanical advantages of a high-strength fastener. The combination of compactness and elevated strength class supports retrofits and new builds where both space savings and load-bearing capacity are priorities. In short, the component offers a practical balance between dimensions and performance for tight assemblies. Industrial-grade reliability and procurement clarity Supplied under the AMF designation and identified by SKU 4000833393NW, the nut provides traceability for procurement and quality control. The standard compliance and clearly stated mechanical class help maintenance planners and production engineers make evidence-based choices. For supply chains that value consistency, the specification reduces ambiguity in ordering and quality checks, supporting predictable uptime and simpler stock management. For reliable supply of AMF fastening hardware and expert procurement advice, contact Metav Werkzeuge to secure stock and specification support via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 4000833393NW Type: M10 Standard: DIN 6330B Manufacturer: AMF Product type: Hexagon nut Facts Key width: 17 mm Overall height: 15 mm Corner dimension: 18.9 mm Strength class: 10 Packaging unit: 1 Special features Hexagon geometry Standard-compliant fastening element Designed for high-tensile applications FAQ What applications is this nut suitable for? The hexagon nut DIN 6330B M10 by AMF is suited for industrial assemblies requiring a compact, high-strength fastening element and is commonly used in machinery, fixtures and maintenance tasks. How does strength class 10 affect performance? Strength class 10 indicates higher tensile capacity and improved clamping reliability; when paired with corresponding bolts, the AMF M10 nut supports joints with elevated mechanical loads. Is this nut compatible with standard spanners? Yes, the nut’s SW 17 mm key width matches standard 17 mm spanners and sockets, enabling quick assembly and routine maintenance. How is the product identified for ordering and traceability? Order and inventory using SKU 4000833393NW; the designation links the component to its DIN 6330B specification and AMF branding. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Hexagon Nut M10 SW16 Forged And Machined Strength Class 10, DIN 6331 - AMF
Take advantage of a DIN‑standardised fastening solution with M10 thread and strength class 10, combining high load capacity, precise dimensions and secure assembly. Order the part directly via Metav Werkzeuge or consult the team for application advice. Hexagon nut DIN 6331 M10 — pressed and milled, strength 10 (AMF) The hexagon nut DIN 6331 M10 is a high‑strength fastening component designed for machine construction and industrial assembly tasks. DIN 6331 standardised geometry Strength class 10 for heavy loads SW 16 mm across flats Pressed and milled finish for precise seating Reliable performance under mechanical load Designed to meet DIN 6331, this hexagon nut delivers predictable mechanical behaviour and consistent torque response. The strength class 10 rating signifies elevated tensile capacity compared with lower classes, making the nut suitable for demanding fastening tasks in production environments. By choosing a component specified to a recognised standard, assembly planners and purchasing engineers benefit from reduced variance in joint performance and simplified quality control. Precision fit for repeatable assembly Dimensional accuracy is central to dependable joints: the nut provides SW 16 mm across flats, an overall height of 15 mm, and a corner dimension of 17.8 mm, aligning with standard spanner sizes and clamping interfaces. The combination of cold‑forming (pressed) manufacture and milled bearing faces ensures flat seating and uniform load distribution, which minimises the risk of uneven clamping and extends service life of bolted connections in fixtures and machinery. Suited to industrial workflows and maintenance routines This hexagon nut supports efficient workshop processes through standardised handling and simple tool compatibility, reducing assembly time and changeover complexity on the shop floor. Stocking a DIN‑compliant, strength‑rated nut streamlines supply chains and maintenance schedules, while consistent part geometry eases automated assembly and inspection procedures. Reliability in every joint contributes to lower downtime and predictable product performance. For secure, DIN‑conforming fixings supplied by a trusted partner, request availability of the AMF hexagon nut M10 (SKU 4000833407NW) from Metav Werkzeuge — technical advisors are available for specification checks and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833407NW Type: M10 Standard: DIN 6331 Product type: Hexagon nut Brand: AMF Facts Overall height: 15 mm Across flats (SW): 16 mm Corner dimension (E): 17.8 mm Strength class: 10 Packaging unit: 1 Special features Pressed and milled manufacture Standardised geometry for spanner fit Designed for machine construction and assembly FAQ What material is the nut made from? The product label does not specify material for the hexagon nut 4000833407NW; material details should be confirmed with Metav Werkzeuge if required for the application. Is this nut compatible with standard M10 bolts? Yes, the DIN 6331 M10 nut is intended for M10 threads and matches common M10 bolt threads when both conform to the same thread standard. What does strength class 10 indicate for this nut? Strength class 10 denotes a higher tensile resistance compared with lower classes, indicating suitability for applications with elevated clamping forces and mechanical loads. Can the nut be used in precision assemblies requiring flat seating? The pressed and milled bearing faces provide improved flat seating and uniform load distribution, making the part suitable for assemblies where consistent clamping is important. Is the across‑flats size compatible with standard tools? The nut features a 16 mm across‑flats dimension (SW 16 mm), compatible with standard spanners and sockets used in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Hexagon Nut M10 Sw17 Pressed And Milled Strength Class 10, DIN 6331 - AMF
Take advantage of the combination of recognised DIN conformity, strength class 10 performance and precise dimensions for reliable fastening in production environments; order directly via Metav Werkzeuge or consult the team for application advice. Hexagon nut M10 (DIN 6331) by AMF — strength class 10, SW 17 mm The hexagon nut M10 by AMF designed for standardised industrial assemblies, offering robust clamping force and compatibility with DIN‑rated components. Hexagon nut M10 to DIN 6331 Strength class 10 for high preload SW 17 mm for standard spanner fit Pressed and milled for consistent faces Secure bolted joints with high clamping reliability Manufactured to DIN 6331, this fastener provides a predictable interface for threaded connections where consistency matters. The designation M10 indicates the nominal thread size, while strength class 10 signals a high tensile capability compared with lower classes; this permits higher preload and reduces the risk of loosening under dynamic loading. Where joint integrity affects production continuity, the measurable performance of this component supports safer torque settings and predictable assembly behaviour, translating into fewer stoppages and reduced rework. Accurate geometry for efficient installation and tool compatibility The combination of SW 17 mm across flats and a height of 15 mm yields a compact profile that is simple to access with standard hand tools. The stated corner size of 18.9 mm ensures compatibility with typical sockets and torque tools, and the pressed‑and‑milled finish produces uniform bearing faces that aid even load distribution. For procurement and assembly planning, these precise dimensions enable correct tool allocation and predictable torque application, which in turn shortens assembly times and improves repeatability on production lines. Practical benefits for workshops and industrial users This nut suits maintenance and assembly tasks where DIN conformity and elevated strength are required, such as machine frames, jigs and fixtures, or critical structural fastenings. The straightforward specification—standard thread type, documented dimensions and class 10 rating—simplifies inventory lists and ensures interchangeability with other DIN‑compliant components. Combined with Metav’s logistics presence in Emmerich, the part supports steady supply and rapid replenishment, helping to maintain uptime and build confidence in daily operations. For robust M10 fastening with strength class 10 and to discuss suitability for specific assemblies, contact Metav Werkzeuge in Emmerich for supply and technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical details Article number: 4000833408NW Type: M10 Standard: DIN 6331 SKU: 4000833408NW Facts Height: 15 mm Across flats (SW): 17 mm Corner size: 18.9 mm Packaging unit: 1 Special features Strength class: 10 Surface/process: pressed and milled Product type: hexagon nut FAQ What strength rating does this nut have? The hexagon nut is specified as strength class 10, indicating suitability for higher preload applications compared with lower classes. Is this nut compatible with standard M10 bolts to DIN norms? Yes, the Hexagon nut M10 (DIN 6331) is designed for compatibility with standard M10 threaded bolts manufactured to DIN specifications. What are the key dimensions to consider for tool selection? Key dimensions are SW 17 mm across flats and a height of 15 mm, with a corner size of 18.9 mm for socket and torque tool selection. Can this nut be used in dynamic assemblies subject to vibration? The higher strength class 10 and uniform bearing faces produced by pressing and milling improve clamp load retention, making this nut suitable for dynamic conditions when used with appropriate locking measures. What is the full identifier for ordering? Order reference: Hexagon nut M10 DIN 6331, AMF, SKU 4000833408NW Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Washer DIN 6340 For M14 Bolts, S5 D40 - AMF
Take advantage of the DIN 6340 conformity, precise 15 mm bore and direct compatibility with M14 fastenings for reliable seating and consistent load distribution in assembly operations. Order the AMF washer directly via Metav Werkzeuge or ask our consultants if further specification is required. AMF U-washer DIN 6340, 15 mm bore — flat washer for M14 bolts The AMF U-washer DIN 6340 is a standardised flat washer designed to provide secure seating and even load transfer for M14 bolts in industrial and mechanical assemblies. DIN 6340 standard compliance 15 mm precision bore Suitable for M14 bolts 5 mm solid thickness, 40 mm outer diameter Consistent seating and load distribution for bolted joints The washer is manufactured to the DIN 6340 dimensional and tolerance framework, delivering predictable mechanical behaviour in assemblies. As a flat washer, it increases the contact area under a screw head or nut, which reduces surface pressure on the joint and helps prevent indentation or loosening under cyclic loads. The 15 mm bore (D1) ensures a precise fit on M14 threaded parts, while the 40 mm outer diameter (D2) provides a stable bearing surface. These characteristics support longer service life of bolted connections and fewer rework operations in production environments. Simple specification and installation reduce assembly uncertainty With clearly defined dimensions — D1: 15 mm, D2: 40 mm, S: 5 mm — the component simplifies parts lists and quality control procedures. The standardised sizing allows straightforward substitution in repair and maintenance workflows without time-consuming fitting trials. Because the part is specified to established tolerances, planners and buyers can rely on consistent interchangeability across batches, which streamlines procurement and inventory management in workshops and industrial stores. Suitable applications and practical benefits in production The washer is intended for use wherever M14 fastenings require a stable seating plane: structural assemblies, machine frames, flanged connections and general plant maintenance. Its measured thickness of 5 mm gives a robust spacer function, while the defined bore reduces the risk of misalignment during installation. For engineers and fitters, the part functions as a small but critical device that helps achieve secure torque transfer and maintain joint integrity under vibration and regular operation. Contact Metav Werkzeuge for supply and specification support on the AMF DIN 6340 washers — our Emmerich team provides procurement assistance and technical clarification to ensure fit and function on the shop floor Technical data Article number: 4000833439NW Standard: DIN 6340 Brand: AMF Product type: Flat washer Facts Suitable for: M14 Bore diameter D1: 15 mm Outer diameter D2: 40 mm Thickness S: 5 mm Packaging unit: 1 Special features Label: U-washer for M14 bolts, 15 mm bore SKU: 4000833439NW UID: 4000833439NW FAQ What bolt size is this washer intended for? The AMF U-washer DIN 6340 is specified for M14 bolts and has a 15 mm bore to match that thread size. Does the data specify the material or coating? Material and coating are not provided in the available product data for the AMF U-washer DIN 6340 (SKU 4000833439NW). How do the dimensions support load distribution? The 40 mm outer diameter increases bearing area while the 5 mm thickness provides a stable spacer, together ensuring improved load distribution and reduced surface pressure. Is this washer compatible with standard DIN practice? Yes, the washer conforms to DIN 6340, which defines the required dimensions and tolerances for this type of flat washer. Can this washer be used in structural assemblies and machine maintenance? The washer is suitable for structural and mechanical applications where M14 fastenings require consistent seating and reliable torque transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15° 842 Horizontal Foot Quick-Acting Clamp Screw-Type, Zinc-Plated, 3.5 kN Thrust / 4 kN Hold - Kukamet
Product data contains contradictory information: the item is described as both a screw-clamp type and a lever clamp. This inconsistency makes it difficult to determine the correct clamp type and provide a clear, comprehensive product description. Accurate product details are essential to ensure customers understand the item's functionality and suitability for their needs. Please clarify whether the clamp type is screw-clamp, lever clamp, or another variation. Resolving this ambiguity will allow for the creation of a complete and accurate product description that aligns with the item's actual specifications and intended use.
16 mm T-Slot Clamp Single M14 Thread - Vertex
Taking advantage of the M14 threaded connection and precise fit for a 16 mm T-slot results in a secure, space-efficient clamping solution. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice. T-Nute B3424M — T-slot nut with M14 thread, fits 16 mm slot (Vertex) T-Nute B3424M is a compact clamping insert designed for secure fastening in 16 mm T-slots on machine tables and fixtures T-slot compatibility 16 mm M14 threaded connection Compact 15.7 x 28 x 8 mm Supplied individually, ready for assembly Secure clamping that reduces setup time A well-matched clamping element reduces downtime and improves throughput on production equipment. The T-slot nut concept ensures repeatable positioning and secure load transfer when paired with an appropriate clamping bolt, while the M14 thread provides a standard interface for common clamping hardware. With a defined fit for a 16 mm T-slot, the component guarantees consistent engagement and minimises lateral play, which supports faster cycle starts and fewer rechecks during batch production. This technical reliability directly contributes to measurable efficiency gains in machining and fixturing contexts. Compact form for dense tooling arrangements Small footprint components enable denser tooling layouts without compromising stability. At 15.7 x 28 x 8 mm, the insert presents a low-profile solution that leaves more usable table area for clamps, stops and workpieces. The reduced projection is especially valuable in setups where multiple clamps share a single T-slot or when tooling must be closely spaced for short-run, mixed-batch production. By selecting a compact T-slot nut, engineers benefit from increased flexibility in fixture design and improved access for tightening tools, helping to streamline both manual and automated clamping operations. Reliable identification and supply for industrial workflows Traceable identification simplifies procurement and inventory management. The part is listed under SKU B3424M and carries GTIN 4061905088780, facilitating clear stock control and reordering. Sourced from Vertex, this insert is supplied individually, which allows ordering to match exact assembly needs and reduces surplus inventory. Metav Werkzeuge’s supply chain in Emmerich acts as a quality filter for the European market, combining broad availability with consistent delivery, so projects proceed without avoidable delays. Contact Metav Werkzeuge for specific compatibility checks or to arrange a tailored supply of Vertex components direct from our Emmerich warehouse Technical data Article number: B3424M GTIN: 4061905088780 Brand: Vertex ECLASS: 21029107 Facts T-slot width: 16 mm Thread: M14 Dimensions: 15.7 x 28 x 8 mm Special features Type: T-slot nut Supplied individually SKU: B3424M FAQ Which T-slot size does this nut fit? The T-Nute fits a 16 mm T-slot and is specified for use where that slot width is present. What thread size is provided? The component uses an M14 thread; Vertex lists this as the standard threaded interface for the B3424M. What are the external dimensions? Dimensions are 15.7 x 28 x 8 mm (L x W x H). Is the part supplied as a single item? Yes, the Vertex T-Nute B3424M is supplied individually. How is the product identified for ordering and stock? Identification: SKU B3424M, GTIN 4061905088780, ECLASS 21029107 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16 mm T-Slot Nut Single With M12 Thread, 15.7x28x8mm - Vertex
Take advantage of reliable, compact clamping for standard 16 mm T-slots and the M12 threaded interface to secure fixtures with consistent repeatability. The combination of precise dimensions and single-piece delivery supports fast set-up and low maintenance. Order the A3424M T-slot nut directly via Metav Werkzeuge or consult our specialists for integration advice. A3424M T-slot nut – M12 thread for 16 mm T-slots (Vertex) The A3424M T-slot nut is a compact clamping element designed for use in 16 mm T-slots, providing a secure threaded interface for fixtures and accessories. M12 threaded connection Compatible with 16 mm T-slots Compact 15.7×28×8 mm form Single-piece precision delivery Faster, more secure clamping for standard T-slots Fitting directly into a 16 mm T-slot, this component provides a robust M12 thread that simplifies the attachment of clamps and modular fixturing. The small footprint and precise outer profile reduce play in the slot, which translates into less setup time and improved repeatability on machine tables. By converting a slot into a reliable threaded anchor, the element supports efficient workholding strategies and reduces secondary operations. Consistent results through precise manufacturing Manufactured as a single-piece component to tight tolerances, the element delivers consistent mechanical behaviour across repeated uses. The compact size and exact dimensions ensure predictable contact conditions and force distribution when tightened into place. This engineering approach minimises variability between setups, improving process stability and supporting higher throughput in production environments that demand repeatable clamping solutions. Simple integration into modular fixtures and tooling The combination of a standard M12 thread and compatibility with common slot widths enables straightforward integration into existing fixturing systems. Installation requires no special adapters: the nut seats into the slot and accepts standard fasteners, allowing rapid retrofitting or reconfiguration of assemblies. The design supports a modular workflow, helping maintain machine uptime while offering a practical route to upgrade clamping performance without extensive redesign. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex A3424M T-slot nut into existing fixturing setups and to discuss compatibility with specific machine tables or fixtures. Technical data Article number: A3424M Name: T-slot nut GTIN: 4061905088322 Manufacturer: Vertex Facts Dimensions: 15.7 x 28 x 8 mm T-slot compatibility: 16 mm Thread: M12 Special features Single item delivery Compact form factor Threaded interface for standard fasteners FAQ What T-slot size is this nut for? The A3424M T-slot nut is designed for a 16 mm T-slot and seats securely to provide a threaded fixing point. Which thread does the nut accept? This Vertex T-slot nut features an M12 thread, compatible with standard M12 bolts and fittings. Is the item supplied individually or in sets? The product is supplied as a single item, delivered individually for flexible purchase quantities. Can this nut be used for modular fixturing on machine tables? Yes, the component is intended as a clamping element for machine tables and modular fixturing systems where a 16 mm T-slot and an M12 threaded connection are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16-65mm Clamping Wedge For T-Slot 20mm With M20x160 Clamping Screw - AMF
Benefit from proven T‑slot compatibility and a wide clamping height range for flexible, secure workholding; the set includes a ready-to-fit M20 clamping screw for immediate use. Order the clamping iron directly via Metav Werkzeuge or ask our consultants if needed. Clamping iron No. 6314V — clamping bar for 20 mm T‑slots with 16–65 mm adjustable height (AMF) A Clamping iron No. 6314V designed for 20 mm T‑slots, offering adjustable clamping heights for versatile fixturing in milling and drilling operations For 20 mm T‑slots Adjustable clamping height 16–65 mm Includes M20 x 20 x 160 clamping screw Robust 22 mm jaw width Secure, adjustable clamping for varied workpieces The Clamping iron No. 6314V delivers a pragmatic solution where versatility matters. Compatible with a 20 mm T‑slot, the device provides a 16–65 mm clamping range that reduces the need for multiple jaw sizes and simplifies setup. The adjustable height enables stable contact across differing workpiece profiles, so fixtures remain firm during cutting or drilling. This results in more consistent machining outcomes and fewer interruptions for readjustment. Ready-to-use hardware reduces setup time Equipped with a M20 x 20 x 160 clamping screw, the assembly is ready for immediate installation, shortening preparation phases on the machine table. The combination of a 22 mm jaw width and 160 mm overall length offers a balanced contact surface that improves load distribution and reduces point stress. A standard M20 thread ensures compatibility with common clamping systems, enabling quick exchange and straightforward maintenance of workholding elements. Practical applications and reliability in the workshop Designed for typical shopfloor environments, this AMF clamping component suits machine vices, milling tables and bespoke fixtures where robust holding is required. The compact footprint supports precise positioning while the dimensioned design minimises vibration during machining. Specified geometry and included screw mean fewer additional purchases and predictable behaviour under load, lending confidence to both repetitive and one‑off production tasks. For ready, dependable workholding with AMF precision, contact Metav Werkzeuge to confirm stock and suitability for specific setups at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833076NW Type: No. 6314V Product: Clamping iron Brand: AMF Packaging unit: 1 Dimensions & core data Clamping height: 16 - 65 mm T‑slot: 20 mm Jaw width: 22 mm Thread: M20 Overall length: 160 mm Features & accessories Includes clamping screw M20 x 20 x 160 Axite enrichment: A: 30; B2: 60; E1: 30; E2: 60; LS: 69 UID / SKU: 4000833076NW FAQ Which T‑slot size is this clamping iron intended for? The clamping iron is designed for a 20 mm T‑slot, ensuring direct compatibility with standard 20 mm machine table slots. What clamping height range does it offer? The device provides an adjustable clamping height from 16 mm to 65 mm, suitable for a broad range of workpiece profiles. Is a clamping screw included with the product? Yes, the item includes a M20 x 20 x 160 clamping screw as part of the delivery for immediate use. What are the key dimensions that affect stability? Primary stability characteristics are the 22 mm jaw width and the 160 mm overall length, which together support even load distribution. For which applications is this clamping bar best suited? The component is well suited to milling and drilling fixtures, machine vices and general workshop fixturing where secure, repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16/20mm T-Slot Nut Nr. 6322A For Fixed Mounting, M6 x 16 - AMF
Take advantage of a compact, fixed-mount solution that fits both 16 mm and 20 mm T-slots and accepts standard M6 × 16 fastenings; order directly via Metav Werkzeuge or consult the technical team for application advice. T-slot Nut No. 6322A by AMF — Nominal slot 16/20 mm, fixed mounting A T-slot nut No. 6322A engineered for secure, fixed mounting in both 16 mm and 20 mm machine and fixture slots, suitable for standard M6 × 16 fasteners. Fits 16/20 mm T-slots Fixed-mount design Compatible with M6 × 16 fastenings Low-profile form for compact assemblies Secure clamping for standard T-slots with minimal profile The T-slot nut delivers straightforward, dependable clamping where slot compatibility is critical. Designed around the nominal slot dimensions 16 mm / 20 mm, the component ensures consistent seating in both machine and fixture profiles, reducing play and misalignment during assembly. Its fixed-mount concept provides a stable bearing surface for threaded fastenings, allowing conventional M6 × 16 screws to be used without adaptation. This predictability shortens set-up times and supports repeatable results on the shop floor. Fast, reliable installation that supports production flow A compact, low-profile mounting element simplifies access in confined assemblies and streamlines insertion into the slot before final tightening. The reduced profile contributes to clearance savings and allows closer component placement, which benefits compact fixtures and modular assemblies. Because the part is tailored for standard thread and slot formats, maintenance and replacement cycles are simplified—spares management is easier when components conform to common industry sizes, improving uptime and operational efficiency. Robust choice for workshops and fixture construction Selecting a purpose-made T-slot nut for fixed mounting helps to avoid secondary modifications and on-site adjustments. The component’s clear specification for slot nominal sizes and thread compatibility supports process planning and quality control. For purchasing and procurement, this clarity enables straightforward parts lists and ensures components match machine tables or fixture rails, making it an efficient choice for engineering departments, toolrooms and production teams seeking reliable, repeatable clamping solutions. Contact Metav Werkzeuge for ordering and application support for the AMF T-slot Nut No. 6322A — technical consultation and prompt dispatch from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833236NW Type: Nr. 6322A Label: Nutenstein Nr.6322A Nennmaß der Nut 16/20mm z.Festmontage AMF Manufacturer: AMF Packaging unit: 1 Suitable for: M6 x 16 Core data Nominal slot dimensions: 16 mm / 20 mm Thread size: M6 × 16 Height (HL): 5 mm Pack unit: 1 Features Fixed mounting design T-slot nut for machine and fixture slots Compact, low-profile form Standard fastener compatibility FAQ What slot sizes is this nut intended for? The AMF T-slot Nut No. 6322A is specified for nominal slot dimensions of 16 mm and 20 mm, allowing use in both machine and fixture T-slots. Which fasteners are compatible with this T-slot nut? Compatibility is with standard M6 × 16 fastenings; the component accepts M6 threads with a 16 mm screw length as indicated. Is this item supplied individually or in sets? The product is supplied in a packaging unit of 1, so each order line corresponds to a single T-slot nut. Does the nut support fixed mounting only, or is it adjustable? The design is for fixed mounting, providing a secure, non-adjustable seating in the slot to ensure stable clamping under load. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160 Simple Workpiece Holder With Three Or Four-Jaw Chuck 1° Resolution - Vertex
Robust workholding with a 160 mm chuck and the option of a three- or four-jaw configuration, combined with a compact 139 mm profile for bench-mounted setups, ensures accurate indexing and stable machining; order this Vertex unit directly via Metav Werkzeuge or contact our consultants for configuration advice. Vertex VSR-63 Simple Dividing Head – 160 mm chuck, three- or four-jaw The VSR-63 simple dividing head is a compact, bench-suitable indexing and workholding device designed for precise positioning and repeatable operations in toolrooms and small workshops. 160 mm chuck diameter Compatible with three- or four-jaw chucks Compact 139 mm overall height Solid 18 kg construction Precise indexing for repeatable production The dividing head delivers consistent precision for repetitive tasks, using a robust spindle and a clearly legible indexing plate to reduce setup time and minimise repositioning errors. With the 160 mm chuck as a stable workholding platform, operators benefit from accurate angular positioning across multiple operations. This measureable repeatability supports higher throughput and fewer rejected parts in series work. Compact build that fits the workshop A low overall profile of 139 mm height and a substantial 18 kg mass form a stable base that resists vibration during cuts and drilling. The compact footprint makes the device suitable for bench mounting where space is limited, while the solid construction ensures long-term mechanical stability. These attributes combine to reduce rework and increase confidence in everyday shop-floor use. Flexible workholding for varied parts Equipped for use with a three- or four-jaw chuck, the unit accommodates both irregular and cylindrical workpieces without complex changeovers. The adaptable chuck options enable secure clamping of asymmetric components as well as concentric pieces, supporting diverse tasks with a single indexing device. This versatility reduces tooling changes and streamlines mixed-production workflows. Low-maintenance and straightforward operation The simple mechanical design prioritises reliability and ease of maintenance. Routine checks and basic lubrication maintain the indexing accuracy, while the straightforward clamping arrangement keeps setup times low. For operators transitioning from basic fixtures, the device provides a clear learning curve and dependable results without elaborate service requirements. For tailored application advice or to request a quotation for the Vertex VSR-63 simple dividing head, contact Metav Werkzeuge – our specialists will advise on the optimal configuration and delivery. Technical data Article number: VSR-63 GTIN: 4061905089145 Manufacturer: Vertex Description: Simple dividing head with three- or four-jaw chuck Facts Diameter: 160 mm Height: 139 mm Weight: 18 kg eClass: 21020590 Special features Three- or four-jaw chuck compatibility Bench-compatible compact design Robust construction for reduced vibration FAQ What chuck size does the unit use? The Vertex VSR-63 simple dividing head is specified with a 160 mm chuck diameter suitable for a wide range of workshop parts. Is the VSR-63 heavy enough for stable machining? Yes, the unit’s mass of 18 kg provides a stable base that helps damp vibration during turning and drilling tasks. Can odd-shaped parts be clamped securely? The three- or four-jaw chuck options included with the Vertex VSR-63 allow secure clamping of both irregular and cylindrical workpieces. Is the device suitable for bench mounting in small workshops? The compact 139 mm overall height makes the VSR-63 well suited to bench-mounted installations where space is limited. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1600 N Closure Clamp Horizontal Base With Hook, Stainless Steel, 25mm Thread Length - Kukamet
Take advantage of a compact, corrosion-resistant design combined with strong clamping and holding forces for secure fixture work. The stainless steel construction, 1,600 N maximum clamping force and horizontal foot mounting with a hook ensure reliable quick-action securing in jigs and closures. Order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. 361 Latch Clamp S361-3-T – stainless steel toggle latch clamp with hook (Kukamet) A 361 Latch Clamp S361-3-T for quick lever locking on fixtures and transport closures, designed for horizontal foot mounting in workshop and industrial settings Stainless steel construction Horizontal base for easy mounting Hook-equipped for secure engagement Clamping force up to 1,600 N Holding force 1,800 N Robust design for secure fixture clamping The clamp is made from stainless steel, which provides corrosion resistance and long service life in workshop environments where coolant, oils or humidity are present. The horizontal foot mounting simplifies installation on jigs and machine tables, allowing the clamp to be integrated into production fixtures with standard fastenings. With a compact form and a thread length of 25 mm, the component is suited to tight assembly spaces while delivering dependable mechanical performance. Fast lever action that speeds production cycles A lever (toggle) mechanism converts operator movement into high clamping output, delivering a 1,600 N clamping force and a 1,800 N holding force for repeatable, vibration-resistant locking. The short, positive stroke reduces cycle time on repetitive operations and supports ergonomic handling on assembly lines. The hook arrangement provides secure engagement for closure applications where a reliable latch is required without complex adjustment. Practical mounting and maintenance advantages Mounting on a horizontal foot makes alignment straightforward and reduces set-up time during fixture changes. The stainless construction minimises corrosion and wear, cutting down on maintenance intervals and supporting predictable downtimes. Weight of just 0.205 kg eases handling and replacement, while the robust mechanical design ensures consistent clamp behaviour across many cycles, improving process reliability in small-batch and series production. Contact Metav Werkzeuge today to confirm mounting details and secure the Kukamet stainless steel latch clamp S361-3-T for reliable fixture and closure tasks Technical Data Article number: S361-3-T GTIN: 8680731509274 Model: 361 Brand: Kukamet Material: stainless steel Data Weight: 0.205 kg Thread length: 25 mm Max clamping force: 1,600 N Max holding force: 1,800 N eClass: 21041718 ETIM: EC011973 Special features Horizontal foot mounting Hook-equipped Lever (toggle) action Corrosion-resistant stainless steel SKU: S361-3-T FAQ What materials is this latch clamp suitable for? The latch clamp S361-3-T is constructed in stainless steel; it is intended for mechanical fixturing and closure tasks where metal and mixed-material assemblies require secure clamping. How does clamping force differ from holding force? Clamping force (1,600 N) refers to the compressive load applied during locking, while the higher holding force (1,800 N) indicates the maximum static retention the mechanism can resist without disengaging. Can the clamp be mounted in other orientations? The design features a horizontal foot for preferred mounting; alternative orientations may be possible depending on fixture design, but horizontal mounting ensures the specified performance. What maintenance does the lever latch require? Routine inspection for wear and lubrication of pivot points preserves the lever action and repeatability; stainless steel reduces corrosion-related maintenance. Is the hook adjustable for different engagement depths? The clamp is supplied with a hook-equipped fastening; engagement adjustments are achieved via the threaded connection (25 mm thread length) and fixture setup to achieve the required closure fit. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1600 N Toggle Clamp With Hook, Horizontal Base, Zinc Plated, 25 mm Thread Length - Kukamet
Take advantage of the compact lever-action design, zinc-plated durability and a holding force of 1,800 N to secure repetitive clamping tasks reliably. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. 361 Toggle Clamp — horizontal-foot toggle clamp with hook, zinc-plated (Kukamet) 361 is a horizontal-foot toggle clamp designed for rapid, repeatable workholding in assembly, jigging and general workshop use Horizontal-foot base for stable mounting Zinc-plated corrosion protection Holding force up to 1,800 N Lever-action with quick-engage hook Reliable clamping power that speeds production The lever-action latch provides a consistent max clamping force of 1,600 N and a holding force of 1,800 N, ensuring components remain fixed during machining or assembly. The mechanism converts manual lever movement into high retention pressure, reducing cycle time and the risk of part movement. For applications that demand repeatable results, this toggle clamp offers a measurable improvement in process stability and throughput. The compact footprint and decisive clamping action are particularly valuable in fixtures where space and speed are priorities. Durable finish for longer service life A zinc-plated surface gives the clamp corrosion resistance suitable for workshop and light industrial environments, extending service intervals and reducing replacement frequency. The plating protects the steel substrate against surface rust and wear from frequent operation, so maintenance is limited to occasional lubrication of pivot points. For users who value low-maintenance components, the plated finish delivers reliable protection while keeping the clamp’s appearance and function intact over long production runs. Easy integration into jigs and fixtures Mounting via the horizontal foot simplifies installation on flat bases, while the thread length 25 mm enables straightforward height adjustment and precise positioning of the clamping spindle. The unit’s modest mass (approx. 0.205 kg) minimises added weight on delicate fixtures without compromising rigidity. The supplied hook facilitates quick engagement with mating fixtures or workpiece anchors, making the latch ideal for modular jigs where frequent loading and unloading occur. Installation requires only common fastening hardware and basic hand tools. Practical safety and handling benefits The lever-action layout offers a controlled, binary clamping motion that reduces operator uncertainty during repetitive tasks; the tactile lock point confirms engagement, which helps prevent accidental release. The compact design and clear mechanical feedback support safer operation compared with improvised fixturing. For process planners, this latch provides a tangible efficiency gain: faster cycle times, reproducible clamping pressure and a reduction in scrap caused by shifting workpieces. Contact Metav Werkzeuge for tailored advice or a quotation on Kukamet toggle clamps; our specialists in Emmerich will assist with selection and delivery to ensure the clamp fits the intended application Technical data SKU: 361-3-T GTIN: 8682843522165 Designation: Toggle clamp 361 Facts Weight: 0.205 kg Max clamping force: 1,600 N Max holding force: 1,800 N Thread length: 25 mm Special features Material: zinc-plated Mounting: horizontal foot With hook Lever-action toggle clamp design FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 1,800 N, which ensures secure retention for typical assembly and jigging tasks. Is the clamp suitable for workshop environments where corrosion is a concern? Yes, the zinc-plated finish on the toggle clamp provides effective corrosion protection for general workshop and light industrial use. How is the clamp mounted to a fixture? Mounting is via the horizontal foot base; the clamp’s threaded spindle with 25 mm thread length allows for height adjustment and secure fastening. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1600N Horizontal Toggle Clamp With Hook, 25mm Thread Length, Zinc Plated, 1800N Holding Force - Kukamet
Benefit from a zinc-plated finish, 1,800 N holding force and compact 0.16 kg mass for reliable, low-maintenance securing of lids and panels — order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Toggle Latch Clamp 362 — zinc-plated with hook and horizontal foot The Kukamet Toggle Latch Clamp 362 is a horizontally mounted latch designed for secure fastening of covers, doors and access panels in industrial fixtures and workshop jigs. Zinc-plated finish for corrosion resistance Holding force up to 1,800 N Closing force 1,600 N for secure locking Horizontal foot with hook for easy mounting Robust, compact fastening for repetitive industrial use The latch is manufactured in zinc-plated steel, combining a corrosion-resistant surface with a compact mass of 0.16 kg, which is advantageous where weight and space are limited. Its hook catch and horizontal base allow it to be integrated into machine guards, transport cases and metal enclosures where a positive mechanical lock is required. The combination of 1,600 N closing force and 1,800 N holding force ensures a firm engagement under vibration and repeated cycles, so assemblies remain secured without extra fasteners or complex adjustments. Clear technical fitment and easy installation Installation is simplified by the horizontal mounting foot; the latch is supplied with a thread length 25 mm for the adjustable catch, enabling fine tuning of engagement distance. The mechanism is designed so that the clamping action is produced by the toggle geometry rather than excessive preload, which reduces wear on mating parts and makes maintenance predictable. Where repeated opening and closing are required, the latch can be serviced quickly and the zinc surface helps to delay onset of corrosion in standard workshop environments. Efficiency in production and workshop contexts This latch supports efficient assembly processes by delivering repeatable, tactile closure and quick release when required. It is particularly suitable for fixtures and jigs, transport fastenings and removable machine guards where uptime and operator safety are priorities. The product is offered within Metav’s distribution network, backed by a longstanding supply chain that serves workshops and industry; Metav’s inventory and logistics at Emmerich provide a consistent source for replacements and larger orders. For projects that require dependable mechanical locking with minimal complexity, the latch provides a pragmatic balance of strength, installation flexibility and low maintenance. Speak to Metav Werkzeuge for delivery options and technical advice on the Kukamet toggle latch clamp 362 — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical Data SKU: 362-2 GTIN: 8680731504613 Manufacturer: Kukamet Finish: zinc-plated Mounting: horizontal foot with hook Weight: 0.16 kg Closing force: 1,600 N Holding force: 1,800 N Thread length: 25 mm ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.16 kg Holding force: 1,800 N Closing force: 1,600 N Thread length: 25 mm SKU: 362-2 GTIN: 8680731504613 Special features Zinc-plated steel Hook included Horizontal foot mounting Adjustable catch Compact design Category: clamp FAQ What materials is this latch suitable for fastening? The Kukamet toggle latch clamp 362 is intended for securing metal and sheet components; its zinc-plated finish provides corrosion resistance for typical workshop and industrial environments. How is the latch mounted and adjusted? Mounting is by the horizontal foot; the adjustable catch uses a thread length of 25 mm for fine tuning of engagement distance on the assembly. What are the maximum forces the latch can withstand? The device offers a closing force of 1,600 N and a holding force of up to 1,800 N, values measured to indicate secure engagement under load. Is the finish suitable for outdoor or humid environments? The zinc-plated surface improves resistance to corrosion compared with bare steel; for prolonged outdoor exposure or aggressive environments, consider additional protective measures. Can the latch be used on movable guards and frequent-access panels? Yes, the toggle geometry is designed for repeated opening and closing with predictable wear characteristics, making it appropriate for guards and access panels that require regular access. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
160mm 20mm T-Slot Bolt M20 Grade 8.8 DIN 787 - AMF
Take advantage of a DIN‑compliant fastening solution that pairs standardised compatibility with high tensile strength and precise dimensions for reliable clamping performance; order the AMF T‑slot bolt via Metav Werkzeuge for dependable supply and expert advice. AMF T‑slot bolt (DIN 787) — T‑slot 20 mm, M20, 160 mm The AMF T‑slot bolt designed for secure clamping in machine tables and fixtures, compatible with 20 mm T‑slots and specified to DIN 787 for industrial use *Conforms to DIN 787 *High tensile grade 8.8 *Designed for 20 mm T‑slots *M20 thread, 160 mm length Secure, standardised clamping for machine tooling A robust fastening element built to DIN 787 ensures consistent fit in machine table grooves and dedicated clamping systems. The M20 thread and compatibility with a 20 mm T‑slot deliver a predictable mechanical interface that simplifies tool selection and reduces the risk of mismatch. Specified as a T‑slot bolt, the component provides a compact clamping solution that integrates with standard fixtures and workholding accessories, promoting production continuity and minimising setup time. Strength classification that supports industrial demands Specified in Grade 8.8, this fastener offers a well‑recognised balance of tensile strength and ductility appropriate for many workshop and light industrial clamping applications. The classification indicates a hardened and tempered metric bolt standard, enabling secure clamping under dynamic loads while maintaining reliable thread engagement. Choosing a fastener with a confirmed strength class reduces uncertainty in load calculations and supports safer, more predictable fixation in jigs and fixtures. Precision dimensions for fast assembly and repeatable results Exact dimensions reduce guesswork during assembly: the 160 mm overall length and the complementary dimensional set (A: 19.7 mm; B: 110 mm; E: 32 mm; K: 12 mm) allow planners to verify clearance and reach before installation. The provided dimensional data, recorded as Axite additions, helps machine operators confirm that the bolt achieves the required clamping stroke without interference. Where space and alignment are constrained, these measured values support faster decision‑making and fewer trial adjustments. Reliable supply and practical application in workshops As a branded component from AMF, this T‑slot bolt suits maintenance, retrofit and new‑build scenarios in metalworking and assembly environments. Supplied in single units, the bolt is suitable for targeted replacements or custom setups where individual items are required. Combined with Metav Werkzeuge’s role as a precision distributor, procurement is straightforward and supported by a stocked warehouse in Emmerich that acts as a quality filter for the European market, ensuring prompt availability and traceable sourcing for professional buyers. For a reliable, DIN‑compliant fastening solution from AMF and fast supply from Metav Werkzeuge, request the exact dimensions or place an enquiry with Metav Werkzeuge for tailored delivery from Emmerich. Technical data Article number / SKU: 4000603237NW Product designation: T‑slot bolt (DIN 787) Brand: AMF Standard: DIN 787 Data Thread: M20 T‑slot width: 20 mm Overall length: 160 mm Strength class: 8.8 Axite additions: A 19.7 mm, B 110 mm, E 32 mm, K 12 mm Packaging unit: 1 Special features Conforms to DIN 787 Designed for machine table T‑slots Single‑piece fastener for clamping applications Suitable for workshop and industrial fixturing FAQ What standard does this T‑slot bolt comply with? The bolt is manufactured to DIN 787, ensuring compatibility with standard T‑slot profiles and predictable mechanical interfaces. Which T‑slot width is this bolt intended for? This T‑slot bolt is intended for a 20 mm T‑slot, matching common machine table grooves used in industrial fixtures. What does Grade 8.8 indicate for this fastener? Grade 8.8 denotes the bolt’s strength classification, indicating a hardened and tempered metric fastener suitable for demanding clamping tasks where reliable tensile performance is required. Can the bolt reach deep clamping positions? With an overall length of 160 mm and the given Axite dimensions (A: 19.7 mm; B: 110 mm; E: 32 mm; K: 12 mm), the bolt is specified to provide sufficient reach for many clamping setups; verify the listed dimensions against the fixture before assembly. How is the item supplied and when is it suitable to order a single piece? The product is supplied in a packaging unit of 1, making it appropriate for individual replacements or one‑off applications in maintenance or prototype work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm 90° Head For NT30 Arbor, Bore For Caliper 85.725-86mm, Max 2000 rpm - Vertex
Benefit from a compact 90° configuration that enables access to confined machining zones, combined with a 160 mm external diameter and a 2000 r.p.m. rating for steady production performance; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Vertex VRA-NT30 Right-angle Head (90°) — 160 mm, max. 2000 r.p.m. A robust VRA-NT30 right-angle head designed for NT toolholder installations, providing precise angular machining where straight spindle access is restricted. 90° right-angle configuration 160 mm external diameter Rated up to 2000 r.p.m. Compatible with NT30 bores 85.725–86 mm Increased throughput where access is limited The right-angle head design translates rotational power into productive machining in locations where a straight spindle cannot reach. With a 160 mm external diameter and a balanced mass of 13 kg, the unit maintains stability during operation while keeping a compact footprint on the machine table. The 2000 r.p.m. maximum speed is specified to preserve bearing life and deliver consistent cutting conditions; this rating supports moderate cutting feeds while reducing vibration compared with higher-speed, lower-mass adaptors. Overall, the combination of precision and controlled rotational speed results in reproducible cycle times and fewer rejects in batch runs. Straightforward integration into NT toolholder systems The head is specified for a drill-head bore of 85.725–86 mm (Type NT), enabling direct seating in standard NT30 interfaces without additional shimming when tolerances are observed. The NT30 compatibility ensures a familiar mounting procedure for workshop technicians and supports mechanical repeatability when changing setups. Because the interface is a standard industrial form, existing fixtures and clamping routines can be reused, which reduces setup time and simplifies changeovers between different jobs while preserving concentricity and axial alignment. Robust build for reliable operation Constructed for workshop use, the assembly’s mass and geometry contribute to smooth running under rated conditions; the 13 kg weight helps damp resonance and stabilise cutting forces during right-angle operations. The specified 2000 r.p.m. limit is chosen to balance cutting capacity and component longevity, ensuring bearings and seals operate within their design envelope. Regular inspection of bearing play and fastening torque, together with adherence to the speed limit, will preserve the head’s performance and reduce unplanned downtime. These design choices favour steady, predictable production rather than pushing the envelope for extreme speed. Suitable uses and basic maintenance guidance This right-angle head is particularly suited to operations requiring side-entry drilling, milling or reaming where direct spindle approach is impractical—examples include bores at an angle to the primary spindle axis and workpieces with deep or obstructed features. Before first use, verify the drill-head bore 85.725–86 mm and confirm secure clamping into the NT30 mounting. Maintenance is uncomplicated: periodic checks of mounting faces, fastener torque and bearing condition will keep the head within tolerance. Where specialised finishes or cutting data are required, pairing the head with appropriate tooling and feeds will optimise surface integrity and cycle efficiency. For reliable right-angle machining with Vertex quality, contact Metav Werkzeuge in Emmerich to discuss the VRA-NT30’s fit for existing NT30 toolholders or request technical advice via info@metav-werkzeuge.com Technical data SKU: VRA-NT30 GTIN: 4061905095221 ECLASS: 21019290 Name: Head (90°) Manufacturer: Vertex Facts Diameter: 160 mm Maximum speed: 2000 r.p.m. Weight: 13 kg Drill-head bore: 85.725–86 mm (Type NT) Special features Right-angle 90° configuration Compatible with NT30 bores Image assets: VRA-R8-main.png, VRA-R8-detail.png FAQ What is the maximum permissible speed for this right-angle head? The maximum speed for the Vertex VRA-NT30 right-angle head is 2000 r.p.m., which ensures reliable bearing life and stable machining. Which toolholder interface is required for installation? Installation requires an NT30-compatible mounting; the head is designed for a drill-head bore of 85.725–86 mm (Type NT) to ensure proper seating. How heavy is the unit and what does that mean for machine setup? The assembly weighs 13 kg; this mass contributes to run-out stability but requires correct clamping and balance checks during setup to maintain concentricity. Is the VRA-NT30 suitable for high-speed finishing operations? The VRA-NT30 is optimised for stable, moderate-speed operations up to 2000 r.p.m. and is best used where steady cutting and repeatability are priorities rather than extreme high-speed finishing. Are there images or technical views available to assess fitment? Yes, image assets for visual inspection are provided (VRA-R8-main.png and VRA-R8-detail.png) to assist in evaluating mounting and clearance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
160mm Block Jaw Set Unstepped Unhardened 3-Piece, For Chuck Ø160mm - RÖHM
Benefit from precise and reliable clamping with a three-piece, unstepped design that fits a 160 mm chuck and delivers consistent contact for repeatable machining. Order the set directly via Metav Werkzeuge or consult our specialists for compatibility advice. Block jaw set for 160 mm chuck (3-piece) — RÖHM A block jaw set engineered for secure external clamping on chucks with a 160 mm diameter, designed as an unstepped, unground three-piece set for stable seating and straightforward exchange. Set of 3 unstepped block jaws For 160 mm chuck diameter Precision fit by RÖHM Secure clamping for repeatable results The three-piece set provides an even distribution of clamping forces across the workpiece, reducing the risk of distortion during turning operations. Its unstepped design allows full jaw contact on cylindrical or slightly contoured surfaces, which improves concentricity and reduces the need for frequent rework. This specification supports efficient work cycles in medium-duty lathe applications, enabling processors to maintain machining tolerances without additional adjustments. Fast changeover and clear compatibility Supplied as a compact set, the jaws are matched for use with a 160 mm chuck, simplifying inventory and setup. The uniform geometry across the three elements ensures a consistent seating interface and reduces set-up time when swapping between workpieces. Delivered by a recognised toolmaker, the components are intended for fast replacement and reliable repeatability, which streamlines workflow in production or maintenance environments. Trusted sourcing and supply continuity Sourcing through Metav Werkzeuge provides easy access to compatible clamping components, backed by a broad product range and a commitment to reliability. Metav’s stock-holding and fulfilment approach aims to shorten lead times and secure ongoing supply to workshops and industrial buyers. For complex setups or confirmation of fit, the product documentation and Metav’s advisory service are available to clarify dimensions and intended use. Contact Metav Werkzeuge for ordering and application support and ensure the RÖHM block jaw set is the correct choice for the chuck and clamping tasks at hand. Technical Data Article number: 4121270160NW Label: Blockbackensatz f.Futter-D.160mm ungestuft ungeh.3St./VE RÖHM Manufacturer: RÖHM Facts Pack contents: 3 pieces Suitable for chuck Ø 160 mm Packaging unit: 1 Special features Unstepped, unground design Brand: RÖHM UID: 4121270160NW FAQ What chuck size is this jaw set compatible with? The RÖHM block jaw set is designed for use with a 160 mm chuck and provides full contact on the clamped surface. How many jaws are included in the pack? The delivery contains a three-piece set; the RÖHM set comprises three matching block jaws. Are the jaws stepped or unstepped? These block jaws are supplied unstepped and unground, allowing complete surface contact where appropriate. Can this set improve concentricity compared with stepped jaws? Yes, the unstepped geometry of the RÖHM block jaw set can increase contact area and help achieve better concentricity for suitable workpiece profiles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Chuck Key 10mm Square Insert With Spring-Loaded Sleeve, For 60mm Chuck - RÖHM
Take advantage of secure, rapid chuck engagement with a spring-mounted sleeve and a 10 mm insert square for reliable torque transfer; order directly via Metav Werkzeuge or ask the consultants for help with application questions. RÖHM chuck key — 10 mm insert square with spring-mounted sleeve A RÖHM chuck key designed for safe and reliable tightening of chucks, featuring a 10 mm insert square and a spring-mounted sleeve for workshop use Spring-mounted sleeve avoids stuck key 10 mm insert square for secure engagement Compatible with 60 mm chuck diameter Single-piece supply, packing unit 1 Faster, more reliable chuck handling for everyday tasks The spring-mounted sleeve provides a clear operational advantage: it reduces the risk of the key remaining lodged in the rotating chuck after adjustment. This mechanism ensures safer operation by allowing the sleeve to retract under slight movement, preventing accidental retention and minimising downtime. Alongside that, the 10 mm insert square guarantees a consistent mechanical interface with standard chuck drives, transferring torque precisely and reducing slippage. These features together improve workflow reliability in routine workshop operations. Reduced risk and clearer process control when changing tools Because the sleeve is spring-mounted, the key detaches cleanly when not required, supporting a predictable tool-change process and lowering the chance of tool or workpiece damage caused by a forgotten key. The spring action is a simple mechanical safeguard that aligns with established safety practices in machining environments, delivering a measurable benefit: fewer interruptions and a smaller likelihood of avoidable incidents during spindle start-up. This practical safety enhancement contributes to an efficient production rhythm. Simple engagement design for consistent torque transmission The 10 mm square drive is a standardised connection that offers repeatable engagement with compatible chucks. The square profile concentrates contact over defined faces, which helps to transmit operator torque without rounding or undue wear when used as intended. For workshops that require dependable manual tightening or loosening of chucks, this straightforward interface reduces variability and supports predictable clamping forces, which in turn helps maintain concentricity and part quality during turning or drilling operations. Practical information for selection and use Intended for chucks with a 60 mm nominal diameter, the key is supplied as a single unit per packaging, making stock control straightforward. The design focuses on robust functionality rather than unnecessary complexity: a spring-mounted sleeve plus a standard insert square form a compact solution for routine clamping tasks. If the application demands different drive sizes or special interface features, consult product documentation or seek tailored advice to ensure compatibility with the intended chuck system. For tailored purchasing advice or to secure the RÖHM chuck key with 10 mm insert square from stock, contact Metav Werkzeuge for expert guidance and order processing Technical Data Article number: 4121409060NW Brand: RÖHM Product type: Chuck key Facts Insert square: 10 mm Suitable for chuck Ø: 60 mm Packaging unit: 1 Special features Spring-mounted sleeve prevents accidental retention of the key in the rotating chuck With insert square for insertion engagement Single-piece supply, straightforward workshop tool FAQ Is this key compatible with all chuck types? Compatibility depends on the chuck drive interface; the RÖHM chuck key is designed for chucks with a 10 mm insert square and is suitable for chucks with a 60 mm nominal diameter. How does the spring-mounted sleeve improve safety? The spring-mounted sleeve on the RÖHM chuck key retracts under slight movement, preventing the key from remaining stuck in the rotating chuck and thereby reducing the risk of accidental spindle start incidents. Can the key be used on lathes and drill presses? The key’s 10 mm square interface is a standard manual drive; it can be used on lathes or drill chucks that accept a 10 mm insertion square and have a compatible 60 mm chuck diameter. What is included in the packaging? The product is supplied as a single unit (packaging unit 1) and includes the chuck key with the integrated spring-mounted sleeve and 10 mm insert square. Is a replacement sleeve or spare part available? Spare-part availability varies by supplier; refer to the RÖHM product documentation or consult Metav Werkzeuge for information about spare parts and service options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Clamping Iron for T‑Slot 20+22mm, DIN 6316 - AMF
Benefit from DIN 6316 conformity, compatibility with T-slot 20/22 mm and M20/M22 fasteners, and a 160 mm length that ensures stable clamping in standard machining set-ups. Order the clamping bar directly via Metav Werkzeuge or consult the advisers for application-specific guidance. AMF clamping bar DIN 6316 — for T-slot 20/22 mm, 160 mm The AMF clamping bar DIN 6316 is designed as a reliable clamping element for machine tables with T-slots of 20 and 22 mm, providing a standardised solution for secure workholding in milling and machining operations. Conforms to DIN 6316 Fits T-slot 20 and 22 mm Length 160 mm for stable clamping Compatible with M20 and M22 fasteners Predictable fit and standard compliance for efficient set-up Conformity to DIN 6316 ensures a predictable mechanical interface between the clamping element and modular fixturing systems. The stated tolerance and compatibility with T-slot 20/22 mm reduce set-up iterations and simplify inventory management for production environments. Where interchangeability and reproducible clamping force matter, adherence to this norm minimises the need for individual adjustment and helps to keep cycle times consistent across batches. Stable workholding through appropriate dimensions The 160 mm overall length delivers a blend of reach and rigidity that suits a wide range of bench and table fixtures. In practice, the extended contact length contributes to stable clamping, lowering the risk of micro-movement during cutting or finishing operations. The component is specified for use with M20 and M22 fasteners, which allows integration with common clamping bolts and stud systems; this compatibility supports secure vertical pressure transfer without requiring bespoke hardware. Practical integration, traceability and workshop readiness Supplied as a single unit, the clamping bar is intended for direct incorporation into existing clamping arrangements and modular assemblies. Traceability is supported by the product identifier 4000833061NW, which assists in procurement and maintenance records. The design focus on compatibility and standard dimensions reduces the learning curve for workshop staff and shortens the time from delivery to productive use, supporting uninterrupted production and dependable repeatability. Contact Metav Werkzeuge for tailored advice on integrating AMF clamping bars in specific fixtures — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — Metav’s specialists provide practical support from Emmerich to the workshop floor Technical data Article number: 4000833061NW Product type: Clamping bar (Spanneisen) Standard: DIN 6316 Dimensions & compatibility Length: 160 mm Width: 22 mm T-slot: 20 + 22 mm Suitable for: M20, M22 Additional details Packaging unit: 1 SKU / UID: 4000833061NW Brand: AMF Axite enrichment: Addition: A: 30; B2: 60; B3: 30; C: 24; E1: 59; E2: 55 FAQ Is this clamping bar suitable for standard T-slot tables? The AMF clamping bar DIN 6316 is intended for machine tables with T-slot 20/22 mm and therefore fits standard tables that use these slot dimensions. Which fasteners are compatible with this component? Compatibility is specified for M20 and M22 fasteners; the bar is engineered to work with commonly available clamping bolts and studs for those thread sizes. What is the length and how does it affect clamping performance? At 160 mm overall length, the clamping bar provides increased contact area and improved rigidity, which contributes to more stable workholding during machining. How can the product be identified for reorder or maintenance? Use SKU 4000833061NW and the AMF designation when reordering to ensure the correct DIN 6316 clamping bar is supplied. Is this suitable for modular fixturing systems? Yes; the DIN 6316 standard and T-slot 20/22 mm compatibility make it suitable for integration into modular clamping and fixturing arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com