100mm Micrometer Set 1 μm Resolution, Ratchet Thimble, ISO 17025 Calibrated Certificate Included - Microtech Metrology
€390.00
Product information "100mm Micrometer Set 1 μm Resolution, Ratchet Thimble, ISO 17025 Calibrated Certificate Included - Microtech Metrology"
Take advantage of the combination of submicron resolution, certified traceability and consistent measuring force for reliable quality control and repeatable results; order the calibrated set directly via Metav Werkzeuge or contact our consultants for application advice.
MICRON OUTSIDE Certi Met micrometer set — 1 μm resolution, ISO 17025 calibration
A precision set of MICRON OUTSIDE Certi Met micrometers designed for traceable outside measurements in laboratory and workshop metrology.
- 1 μm resolution for submicron control
- ISO 17025 calibration certificate included
- Friction thimble and ratchet for consistent force
- Set of 4 micrometers, range 0–100 mm
Precision and traceability that reduce inspection risk
The set delivers high-accuracy measurement with a stated performance reaching approximately ±2 µm, paired with a 1 µm resolution (0.001 mm display increment). That combination supports tight tolerance verification and reduces uncertainty in pass/fail decisions on small components. The integrated friction thimble and ratchet are designed to standardise the measuring force, lowering operator‑dependent variation and improving repeatability across shifts. A hardened‑tool environment or calibration lab benefits from the set’s analogue indication and mechanically robust design for routine dimensional checks.
Practical coverage for workshop and laboratory workflows
Delivered as a set of 4, the micrometres cover the range 0–100 mm in convenient steps, so one compact kit replaces multiple single instruments and shortens measuring cycles. The analogue reading of 0.001 mm suits inspection benches where visual verification and fine gradation are required without electronic interfaces. Included with delivery is a calibration certificate issued to ISO 17025, ensuring traceability to national standards and simplifying quality documentation for audits and incoming inspection procedures; this reduces administrative follow‑up and supports conformity with quality systems.
Consistent handling and efficient routine use
Daily measuring routines profit from the ratchet stop and friction thimble, which enforce a repeatable contact force and therefore minimise human error during repeated measurements. The set’s analogue nature means no batteries and straightforward maintenance; calibration intervals are clearly documented by the supplied certificate. For production environments seeking to harmonise their metrology equipment, the kit offers a balanced mix of precision, durability and procedural clarity that integrates easily into existing quality control workflows.
Request a technical quotation or discuss application suitability with Metav Werkzeuge — our specialists in Emmerich can advise on supply and calibration options for the Microtech Metrology micrometer set (SKU 110110110) and arrange delivery from our central European quality hub.
Technical data
- Article number: 110110110
- GTIN: 4061905456886
- Brand: Microtech Metrology
- Set: 4 pieces
- Range (set): 0–100 mm
Facts
- Resolution: 0.001 mm
- Stated accuracy: ±2 µm
- Pieces per set: 4
- Analog reading: yes
Special features
- Friction thimble
- Ratchet stop
- ISO 17025 calibration certificate included
- Set out of 4 pcs
FAQ
What is included in the delivery of the set?
The delivery comprises a set of 4 micrometers covering 0–100 mm, a calibration protocol and the ISO 17025 calibration certificate for the MICRON OUTSIDE Certi Met micrometer set (SKU 110110110).
What accuracy and resolution can be expected?
The instruments provide a resolution of 0.001 mm (1 µm) and a stated performance reaching about ±2 µm, suitable for tight tolerance verification in laboratory and workshop inspection.
Are the instruments suitable for production use?
Yes — the combination of a friction thimble, ratchet stop and robust analogue display makes the set appropriate for routine workshop and production‑quality control environments.
Is traceable calibration supplied with the micrometers?
Calibration to ISO 17025 is supplied with the set; the MICRON OUTSIDE Certi Met micrometer set is delivered with the corresponding calibration certificate and protocol.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools