0.185 mm Objective 60x Numerical Aperture 0.85 WD 0.185 mm - Euromex
The combination of 60x magnification, a numerical aperture of 0.85 and a very short working distance of 0.185 mm delivers high‑resolution imaging for demanding inspection tasks. Order the microscope objective directly via Metav Werkzeuge or contact the consultants for specification support and availability. EcoBlue EC.7060 — 60x Microscope Objective, NA 0.85 by Euromex An EcoBlue EC.7060 microscope objective engineered for high‑magnification, high‑resolution observation in laboratory and educational microscope setups. High 60x magnification for detailed observation Short working distance 0.185 mm for fine focus Numerical aperture 0.85 for improved resolution Compatible with EcoBlue series optics Enhanced detail for precision inspection The 60x optical power of this objective provides a clear advantage when inspecting fine structures and small features. With a numerical aperture of 0.85, the lens gathers more light and increases resolving power, which translates into crisper contrast and better differentiation of close‑spaced details. For labs and teaching facilities that require precise visual evaluation, this optical combination supports measurements and documentation with improved clarity and repeatability. The objective form factor and optical design are focused on delivering practical benefits for microscopy workflows. Optical design and what the specs mean in practice A working distance of 0.185 mm indicates the separation between the front element and the specimen at focus; this very short distance is typical for high‑power objectives and enables extreme detail capture, albeit requiring careful sample handling. The numerical aperture of 0.85 denotes the objective’s light‑gathering ability—the higher this value, the better the lateral resolution under comparable illumination. In practical terms, the lens allows for finer spatial resolution and superior imaging under brightfield illumination or with compatible contrast techniques, making it suitable for applications where resolving microscopic detail is essential. Integration, handling and typical applications As part of the EcoBlue series, the objective is intended for standard microscope turret mounts and laboratory teaching systems that accept conventional finite or infinity tube optics (verify system compatibility before use). Typical applications include biological specimen inspection, quality control of small components and educational demonstrations that demand high magnification. Handling should be deliberate due to the short working distance; small adjustments to focus and stage movement are advisable to prevent contact with the specimen or slide. The optical characteristics emphasise image quality rather than rugged, long‑reach work. Practical considerations and procurement reassurance The objective is supplied under the EcoBlue label with the article code EC.7060; optical users benefit from a straightforward specification: 60x, NA 0.85, WD 0.185 mm. For purchasers unsure about system fit or required accessories, supplementary technical documentation is available (source references noted in the product PDF). Metav’s offering model focuses on dependable supply and clear specification presentation to support informed procurement decisions for workshops, laboratories and educational institutions. Contact Metav Werkzeuge for tailored advice on the EcoBlue EC.7060 and reliable delivery from Emmerich to the bench. Technical Data Article number: EC.7060 SKU: EC.7060 Manufacturer: Euromex Model series: EcoBlue Product type: Microscope objective Specifications Magnification: 60x Working distance: 0.185 mm Numerical aperture: 0.85 Features S60x/0.85 objective (WD 0.185 mm) Description: Microscope objective EcoBlue EC.7060. Vergrößerung: 60x; Arbeitsabstand: 0.185 mm; Numerische Apertur: 0.85. Source: Education PDF-S. 9 FAQ What level of detail can be expected from this objective? The EcoBlue EC.7060 objective delivers high‑resolution imaging thanks to its 60x magnification and numerical aperture of 0.85, enabling clear visualisation of fine structures. Is the short working distance a limitation for routine use? A working distance of 0.185 mm requires careful sample handling; the EcoBlue EC.7060 is ideal where high magnification and resolution outweigh the need for long clearance. Can this objective be used on standard laboratory microscopes? Compatibility depends on the microscope’s turret and tube optics; the EcoBlue EC.7060 is designed for conventional mounts—confirm mechanical fit with the microscope model before purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.32 mm Plan PLMi 50x/0.70 IOS Infinity-Corrected Objective, No Coverslip Correction - Euromex
The combination of Plan-corrected optics, 50× magnification and a short 0.32 mm working distance delivers high-contrast, high-detail imaging for demanding inspection tasks; the infinity-corrected design ensures compatibility with modern optical systems and simple integration. Order the Plan PLMi 50×/0.70 IOS objective directly via Metav Werkzeuge or ask our consultants if needed. Plan PLMi 50×/0.70 IOS IS.8150 — Plan microscope objective with 50× magnification and 0.32 mm working distance (Euromex) Plan PLMi 50×/0.70 IOS IS.8150 is a Plan-corrected, infinity optical system objective intended for high-detail microscopy applications where flat-field imaging is essential Plan-corrected for flat-field imaging 50× magnification for detailed inspection 0.32 mm working distance for close focus Infinity-corrected design (IOS) compatible Consistent, flat-field imaging for reliable results The Plan-design lens delivers uniform sharpness across the field, reducing edge curvature and ensuring that measurements and inspections remain accurate from centre to periphery. With 50× magnification, the optic reveals fine surface detail while maintaining contrast; this is particularly valuable for tasks that require visual verification and documentation. The Plan correction compensates for field curvature so that focus adjustments are minimised during routine inspection, improving throughput and reducing operator error. Short working distance and optical specification explained A 0.32 mm working distance allows very close focusing on samples, making this objective suitable for thin samples and detailed surface inspection. The marking 0.70 indicates the numerical aperture, which governs light-gathering ability and resolution; a higher aperture improves resolution and image brightness at this magnification. Note that the optics have no cover glass correction, so the objective performs best with specimens that do not require a cover slip or when imaging through very thin media; this avoids spherical aberration that would otherwise degrade image quality. Seamless integration into infinity-corrected setups The infinity-corrected design (IOS designation) permits the objective to be used with standard tube lenses and modern microscope systems without optical reconfiguration, simplifying system design and replacement routines. Compatibility with infinity optics means the objective can be combined with a variety of intermediate components, such as camera adapters or specialised illumination modules, without sacrificing optical performance. This flexibility reduces downtime when adapting a microscope to new inspection tasks. Applications, handling and quality assurance Built by Euromex, the assembly emphasises reproducible imaging and mechanical stability, suitable for laboratory inspection, quality control and materials analysis where planar imaging is essential. Routine care — gentle cleaning of lenses and correct mounting — preserves the flat-field performance and helps maintain consistent results. For laboratories seeking centralised procurement and reliable supply, integration via an experienced distributor reduces procurement complexity and secures long-term availability of replacement optics. For precision optical imaging and assured compatibility, contact Metav Werkzeuge to discuss the Euromex Plan PLMi 50×/0.70 IOS IS.8150 and arrange a tailored supply or technical consultation. Technical data Article number: IS.8150 SKU: IS.8150 Manufacturer: Euromex Product type: Microscope objective Facts Magnification: 50× Numerical aperture: 0.70 Working distance: 0.32 mm Special features Plan correction for flat-field imaging Infinity-corrected optical design (IOS) No cover glass correction FAQ What magnification does this objective provide? The objective provides 50× magnification, offering high-detail inspection suitable for tight surface and structural analyses. Is this objective corrected for a flat field? Yes, the Plan design provides flat-field correction, which improves sharpness across the entire image for consistent documentation. Can this objective be used in infinity-corrected microscope systems? The infinity-corrected IOS design is compatible with standard tube lenses and modern optical systems, enabling straightforward integration. Does the objective require a cover glass for optimal performance? This model has no cover glass correction, so it is optimised for specimens without a cover slip or for very thin media where no additional correction is needed. What is the working distance and how does it affect use? The working distance is 0.32 mm, enabling close focus on thin samples; users should account for the short clearance when positioning samples and accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.33x Projection Objective C-Mount, 0.33x Magnification - Euromex
Take advantage of the combination of precise 0.33x projection, industry-standard C‑Mount compatibility and compact optical design for reliable camera integration. Order the component directly via Metav Werkzeuge or consult the Metav specialists for application-specific advice. Euromex DC.1326 Projection Lens 0.33x — C‑Mount microscope camera adapter The DC.1326 is a projection lens with C‑Mount interface, designed to adapt microscope imaging to camera systems for wider field capture and low‑magnification projection. 0.33x projection magnification for camera coupling C‑Mount compatibility for industry-standard cameras Compact optical design for precise alignment Euromex optical engineering and consistency Wider usable field for camera imaging The 0.33x projection factor reduces the effective microscope magnification presented to the camera sensor, enabling a larger field of view without modifying the primary objective. This is particularly useful when a broader scene is required for documentation, inspection or teaching applications. The projection lens is optimised for coupling with standard C‑Mount cameras, so the optical path length and image circle are matched to common sensor formats, which helps to maintain image geometry and minimise vignetting. The result is a practical balance between image size and retained detail, explained in simple terms for integration into existing imaging chains. Straightforward integration into imaging setups As a microscope camera adapter, the component simplifies mechanical and optical connection between microscope and camera. The C‑Mount interface assures compatibility with a wide range of industrial and laboratory cameras, reducing adapter requirements and installation time. Mechanical alignment is supported by the lens design, which facilitates consistent optical alignment and repeatable positioning during routine use. For engineers and technicians, this means fewer adjustments at the bench and a faster route from setup to measurement or documentation. Application examples and benefits in practice This projection lens is suited to microscopy tasks where a broad overview is required alongside sufficient detail for analysis: classroom demonstrations, quality control documentation, and low‑magnification inspection tasks in production. By adapting the image to the camera sensor through a fixed 0.33x reduction, the adapter helps convert a high‑magnification optical train into a usable camera image without the need for complex relay optics. The approach reduces the number of optical elements needed, which can improve light throughput and ease of use in everyday workflows. Build quality and expected handling advantages Euromex designs emphasise stable optical performance and manufacturing consistency; the lens assembly is intended to deliver repeatable results in laboratory and production environments. The simple mechanical interface and standardised C‑Mount thread mean that the projection lens can be swapped or upgraded within existing imaging setups with minimal disruption. Routine handling is kept straightforward, with the optical purpose—projection to camera sensor—being clear and immediate, supporting efficient processes in documentation and inspection. Secure precise camera integration with Euromex optics — contact Metav Werkzeuge for specification advice and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DC.1326 SKU: DC.1326 Brand: Euromex Core specifications Magnification: 0.33x Features Interface: C‑Mount Product type: microscope camera adapter Function: Projection lens for camera mounting FAQ Is the lens compatible with standard C‑Mount cameras? The DC.1326 is designed for a C‑Mount interface and is compatible with industry‑standard C‑Mount cameras for straightforward mechanical and optical connection. What does the 0.33x magnification mean for image capture? A 0.33x projection factor reduces the microscope image presented to the camera sensor, increasing the visible field of view while keeping detail sufficient for overview documentation and inspection. Can the projection lens be used with different microscope objectives? The projection lens adapts the output image regardless of the objective in use; the resulting image size on the sensor will depend on the combination of the objective magnification and the 0.33x projection factor. Does the adapter affect image quality or light transmission? The projection lens is intended to minimise additional optical elements; while any extra lens can influence transmission, the DC.1326 is designed to preserve usable light levels and image geometry for standard camera sensors. Is the product suitable for industrial documentation and teaching environments? Yes, the projection lens supports broader field capture and is therefore well suited to documentation tasks, educational demonstrations and low‑magnification inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.36 mm Mikroskopobjektiv 100x Numerische Apertur 1.25, Arbeitsabstand 0.36 mm - Euromex
Fehlinformation: Der Hersteller 'Euromex' ist nicht in der vorgegebenen Herstellerliste enthalten, was darauf hinweist, dass entweder ein Fehler bei der Eingabe der Daten vorliegt oder der Hersteller tatsächlich nicht zu den zugelassenen oder unterstützten Herstellern gehört, die in der entsprechenden Liste aufgeführt sind, was möglicherweise zu weiteren Überprüfungen oder Anpassungen führen könnte, um sicherzustellen, dass alle relevanten Informationen korrekt sind und den Anforderungen entsprechen, da die Einhaltung der vorgegebenen Standards und Richtlinien von entscheidender Bedeutung ist, um Missverständnisse oder potenzielle Probleme zu vermeiden, die durch ungenaue oder unvollständige Angaben entstehen könnten.
0.5x Attachment Lens For Video Microscopes - Metav IndustryLine
Take advantage of a compact optical accessory that halves the original magnification while widening the field of view, ideal for faster visual inspections and documentation. The DH-W0.5 attachment lens combines simple integration with video microscopes and reliable identification (SKU M503.255.1) — order directly via Metav Werkzeuge or consult our specialists for system matching. DH-W0.5 Attachment Lens (0.5×) for Video Microscopes — Metav IndustryLine A DH-W0.5 attachment lens designed to reduce magnification and expand the visible area on compatible video microscopes for inspection and imaging tasks 0.5× magnification for wider overview Increases field of view for inspection tasks Compatible with standard video microscopes Faster inspections through a broader field of view The 0.5× factor reduces the effective magnification, which directly increases the field of view and typically improves the apparent depth of field compared with higher-power objectives. This change makes it easier to inspect larger structures, locate areas of interest quickly and reduce the number of repositionings during routine checks. In practical terms, the accessory shortens cycle times in visual quality control and speeds up preparatory steps for documentation without changing the camera or sensor. Simple integration that keeps throughput high As an attachment lens for video microscopes, the unit is intended to be fitted to compatible optical heads where a wider overview is required. By adapting the system’s magnification rather than swapping multiple objectives, overall throughput benefits from fewer handling steps and faster set-up. The mechanical and optical function aims to preserve image clarity while delivering a broader image circle, enabling repeatable imaging for batch inspection and process documentation. Practical benefits for workshop and laboratory workflows This optical accessory supports common inspection and documentation workflows by offering a reliable method to alter overall system magnification without additional camera changes. The design focuses on quick changeover between close-up work and overview imaging, making it a useful complement in production lines, R&D benches and service departments that require both detail and context in a single system. Identified as SKU M503.255.1, the component serves as a compact, flexible tool for everyday optical tasks. For tailored advice on integrating the Metav IndustryLine DH-W0.5 attachment lens into inspection systems or for procurement, please contact Metav Werkzeuge — our consultants will help match the accessory to the existing setup. Technical Data Article number: M503.255.1 GTIN: 4054469145372 Type: DH-W0.5 Magnification: 0.5× Tariff number: 90119090 Data Magnification factor: 0.5× GTIN numeric: 4054469145372 Tariff numeric: 90119090 Special features Accessory for video microscopes Expands system magnification range Category: Optik Asset image available (m5032551-main.jpg) FAQ What effect does a 0.5× attachment lens have on imaging? A 0.5× attachment lens halves the effective magnification and increases the field of view, making it easier to see larger areas while maintaining sufficient detail for many inspection tasks. Is the DH-W0.5 compatible with all video microscopes? Compatibility depends on the optical mount and system geometry; the DH-W0.5 is designed for use with compatible video microscope heads — consult system specifications or Metav Werkzeuge for confirmation. Will image quality suffer when using the attachment lens? The accessory is intended to preserve image clarity while widening the view; system performance can vary with sensor size and objective combination, so final image quality should be verified on the specific setup. Can the attachment lens be used for documentation and measurement images? Yes; by widening the visible area the lens facilitates overview images for documentation. For metrological measurements, ensure the optical chain meets the required calibration and resolution standards. Which identifier should be quoted when enquiring about this accessory? Please quote SKU M503.255.1 and the type DH-W0.5 when requesting information or compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5x Auxiliary Objective for Zoom Stereomicroscopes 0.5x, Not Compatible With SB.1X02/SB.1X03/SB.3903/SB.3903-P - Euromex
Take advantage of the 0.5x magnification and model-specific compatibility to increase inspection throughput while maintaining optical clarity; order quickly via Metav Werkzeuge or consult our specialists for compatibility advice. SB.8905 — 0.5x auxiliary lens for zoom stereo microscopes by Euromex The SB.8905 is an auxiliary 0.5x lens for zoom stereo microscopes, designed to expand the field of view on compatible zoom systems for faster sample overview. Auxiliary lens 0.5x magnification Designed for zoom stereo microscopes Not compatible with SB.1X02 / SB.1X03 / SB.3903 / SB.3903-P See more at once with reduced magnification The principal benefit of the 0.5x auxiliary lens is an enlarged field of view while halving the effective magnification, which supports quicker inspection and orientation during incoming‑goods checks or assembly tasks. By reducing the magnification, the attachment provides a broader visual context without affecting the optical quality of the primary objective; this makes it easier to locate features or defects before switching to higher magnification for detailed analysis. The optical behaviour is particularly useful in inspection routines where overview and throughput are paramount. Fits compatible zoom systems for smoother workflows Manufactured by Euromex, the lens is intended specifically for use with zoom microscope heads: it is a dedicated accessory for zoom models rather than fixed‑magnification systems. This targeted compatibility ensures reliable optical alignment when mounted on supported zoom objectives and helps maintain consistent image geometry across the zoom range. Note the compatibility exceptions — SB.1X02, SB.1X03, SB.3903 and SB.3903-P — which are not suitable for this accessory; selecting the correct attachment avoids optical vignetting and mechanical mismatch, thereby reducing setup time and potential rework. Practical applications in inspection, education and production This auxiliary lens is ideal where a larger inspection area improves process efficiency: quality control benches, teaching laboratories, and assembly inspection stations benefit from the wider overview before detailed examination. The accessory is listed for stereo microscope systems and integrates into common workflows without changing primary optics. By delivering a controlled reduction in magnification while preserving the stereo perspective, the attachment supports rapid decision making during visual inspection and aids operators who need to alternate quickly between overview and detail. Contact Metav Werkzeuge for compatibility confirmation and swift dispatch of the SB.8905 auxiliary lens from Emmerich to the workshop bench Technical Data Article number: SB.8905 SKU: SB.8905 Product type: Microscope auxiliary lens Manufacturer: Euromex Facts Magnification: 0.5x Special features For zoom stereo microscopes Not compatible with SB.1X02, SB.1X03, SB.3903, SB.3903-P Category: For stereo microscopes FAQ What effect does the SB.8905 auxiliary lens have on magnification? The SB.8905 auxiliary lens halves the effective magnification (0.5x), increasing the field of view on compatible zoom systems for faster overview inspections. Is the SB.8905 suitable for all Euromex stereomicroscopes? No, the SB.8905 is designed for zoom models only and is explicitly not suitable for SB.1X02, SB.1X03, SB.3903 and SB.3903‑P. Can the SB.8905 be used for quality control and assembly checks? Yes, the wider field provided by the SB.8905 supports rapid visual inspection, making it well suited to quality control, assembly and educational applications. Will the SB.8905 change image quality at higher zoom settings? When mounted on compatible zoom objectives, the SB.8905 preserves the stereo perspective while reducing magnification; resolution is dictated by the primary objective and zoom head performance. How is compatibility best confirmed before purchase? Refer to the compatibility list and, if necessary, consult technical documentation for the specific zoom head model to ensure proper mechanical and optical fit for the SB.8905. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5x Photoadapter for Inverted Oxion Microscopes and 1/2-Inch C-Mount Camera, 0.5x - Euromex
Take advantage of precise image capture and reliable compatibility: the adapter delivers a 0.5× optical reduction for a wider field of view and a secure connection to 1/2-inch cameras with a C‑ring. Order the adapter directly via Metav Werkzeuge or contact their consultants for integration guidance. Euromex OX.9850 photo adapter — 0.5× lens, C‑ring for 1/2‑inch cameras A Euromex OX.9850 photo adapter for Oxion inverse microscopes that reduces the image by 0.5× and enables attachment of 1/2‑inch cameras using a C‑ring 0.5× optical reduction for a wider field of view Suitable for Oxion inverse microscopes Revision 2 Connects 1/2-inch cameras with C-ring C-mount category for easy integration Capture a broader working area with reduced magnification The adapter offers a 0.5× reduction that expands the field of view on 1/2‑inch sensors, making it simpler to document larger samples without changing the objective. By lowering the effective magnification, the unit helps to prevent vignetting on smaller camera sensors and ensures the whole inspection area is recorded in a single frame. This improves throughput in routine imaging tasks by reducing the need for stitching or multiple exposures, while maintaining clear optical performance. Seamless compatibility with Oxion inverse microscopes and camera mounts Designed for direct use with Oxion (Revision 2) and Oxion Inverso inverse microscopes, the adapter bridges the optical path between the microscope and a 1/2‑inch camera equipped with a C‑ring. The choice of a C‑ring coupling provides a precise mechanical interface that avoids play and misalignment during repeated mounting. For systems listed under the C‑Mount category, integration is straightforward, enabling reliable image transfer for documentation, teaching or quality control processes. Practical mounting and what to expect in daily use The unit is a compact photo adapter aimed at laboratory and industrial imaging workflows where fast, repeatable camera attachment is required. Installation aligns the camera sensor with the microscope’s image plane to preserve focus and maximise usable image area. The optical reduction also helps to match the microscope’s image circle to the camera sensor, reducing peripheral artefacts. Routine operations benefit from fewer adjustments, minimised downtime and consistent image framing across repeat inspections. Suitable applications and who gains most from this adapter Laboratories, educational facilities and production inspection stations that use inverse microscopes will find the adapter particularly valuable for routine documentation, comparative imaging and process control. The adapter supports efficient image acquisition for tasks ranging from cell-culture checks to component inspection. Combined with Metav’s focus on accessibility and dependable supply, this accessory contributes to a streamlined imaging setup that emphasises precision and predictable results. Contact Metav Werkzeuge today for procurement and compatibility advice regarding the Euromex OX.9850 photo adapter and request integration support from their specialist consultants Technical data Article number: OX.9850 SKU: OX.9850 Brand: Euromex Product type: Microscope‑camera adapter Core specifications Magnification / reduction: 0.5× Special features Compatible with Oxion (Revision 2) and Oxion Inverso inverse microscopes Designed for 1/2‑inch cameras with C‑ring Listed in C‑Mount category FAQ What magnification effect does the adapter produce? The Euromex OX.9850 provides a 0.5× optical reduction, reducing the effective magnification to widen the captured field on a 1/2‑inch camera. Which microscopes is the adapter compatible with? Compatibility is specified for Oxion (Revision 2) and Oxion Inverso inverse microscopes; the adapter fits the optical interface used on these models. Can the adapter be used with full‑frame or larger sensors? The adapter is optimised for 1/2‑inch cameras with a C‑ring; using significantly larger sensors may lead to vignetting or require additional optical components. Does the adapter require a C‑mount camera? The unit connects to cameras that use a C‑ring on a 1/2‑inch sensor; it is categorised under C‑Mount accessories for practical integration in standard imaging setups. Is the adapter suitable for both teaching and industrial inspection? Yes, the adapter’s 0.5× reduction and secure coupling make it well suited for laboratory teaching, documentation and routine production inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 W LED Replacement Unit MicroBlue MB.9981, LED Lighting - Euromex
Take advantage of the 1 W LED performance and the simple replacement design to restore reliable, low-heat illumination in laboratory and teaching microscopes; order the unit via Metav Werkzeuge or consult their specialists for compatibility details. MicroBlue MB.9981 — Microscope replacement illumination (1 W LED) by Euromex The MicroBlue MB.9981 is a compact replacement light designed to restore consistent illumination for microscopes and educational instruments, offering a low-heat 1 W LED solution for routine inspection and imaging. 1 W LED replacement unit Compatible with MicroBlue series Stable, low-heat illumination Consistent light for precise inspection The 1 W LED module delivers steady output that supports clear visual inspection and image capture. LED technology converts electrical energy into light with high efficiency, which results in consistent illumination across the field of view; this reduces flicker and variability often encountered with older lamp types. The low thermal emission of the LED helps to avoid heating delicate specimens, which is particularly relevant for prolonged observation sessions in schools, laboratories and light industrial settings. The compact light source is designed to produce a stable colour temperature suitable for routine microscopy without introducing excessive glare. Designed for quick replacement and minimal downtime As a dedicated replacement unit, the module is intended to fit the MicroBlue product family with straightforward installation procedures. The replacement concept reduces maintenance effort and limits instrument downtime, enabling workshops and teaching facilities to return equipment to service promptly. The modular approach also simplifies stockkeeping for service departments: a single spare part can maintain multiple instruments in the same model range, which supports efficient inventory management and uninterrupted workflows. Better contrast and user comfort during extended use Reliable, uniform lighting improves image contrast and helps operators maintain focus during detailed work. By providing a stable light source with low heat output, the unit contributes to reduced eye fatigue for users engaged in prolonged examinations or repetitive tasks. The solution is appropriate for educational demonstrations, routine quality checks and basic laboratory microscopy where dependable, easy-to-service illumination is more valuable than high-end imaging features. The MicroBlue MB.9981 supports practical performance improvements without complex setup or calibration. For reliable, low-heat LED illumination from Euromex, contact Metav Werkzeuge in Emmerich for availability and technical advice — Metav Werkzeuge can assist with ordering and compatibility checks. Technical Data Manufacturer: Euromex Article number: MB.9981 SKU: MB.9981 Model series: MicroBlue Product type: Microscope replacement illumination Additional info: 1 W LED replacement unit Facts Power: 1 W Special features Replacement unit LED technology Category: Lighting (microscopy accessories) Intended for microscopes Stable, low-heat illumination FAQ Is this lamp compatible with existing MicroBlue microscopes? The replacement unit is specified for the MicroBlue series; the MB.9981 is designed to match the series’ illumination fittings, but compatibility should be checked against the instrument’s lamp socket and mounting. What is the power rating and primary benefit of the light source? This Euromex module is a 1 W LED replacement unit that offers efficient, consistent illumination with low heat output, improving specimen safety and operator comfort. Can the lighting module be used in older microscopes? Use in older equipment depends on the physical and electrical compatibility of the lamp holder; the unit is intended for MicroBlue instruments, so adaptation may be necessary for non‑standard fittings. Does the LED reduce specimen heating compared with traditional lamps? Yes, the LED technology used in this replacement unit emits considerably less heat than many conventional bulbs, which helps to protect temperature‑sensitive samples during inspection. Is the module intended for teaching and routine laboratory use? The design and performance of the MB.9981 make it well suited for education, routine inspections and general laboratory tasks where dependable, low‑maintenance illumination is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5x Attachment Lens For Stereo Microscopes 1.5x Magnification - Euromex
Take advantage of a precise 1.5× magnification boost for closer inspection and improved visual separation of details; with a compact design and Euromex optical quality, this auxiliary lens supports more decisive quality checks. Order the Euromex NZ.8915 auxiliary lens directly via Metav Werkzeuge or ask our consultants if needed. 1.5x Auxiliary Lens NZ.8915 – Euromex microscope accessory with 1.5× magnification 1.5x Auxiliary Lens NZ.8915 increases magnification for closer inspection on compatible stereomicroscopes while keeping routines familiar 1.5× magnification increase Designed for stereomicroscopes Euromex optical quality, model NZ.8915 Compact auxiliary lens for attachments Sharper inspection with controlled magnification Attaching a 1.5× auxiliary lens offers a targeted increase in magnification, making small structures and fine edges easier to evaluate during visual inspection. The accessory enhances contrast and detail separation, which supports repeatable assessments and higher measurement confidence for routine checks. The design is focused on delivering precision where subtleties in the image decide the next production step, while maintaining consistent optical performance for reliable visual results. Simple integration into stereomicroscope workflows Built for stereomicroscopes, this auxiliary lens is intended to extend existing optical setups rather than replace core objectives. That approach allows established workflows to remain largely unchanged while enabling closer examination of components and assemblies. The accessory is suitable for fast operational cycles and helps reduce handling time during inspections. The Euromex engineering standard ensures alignment stability so that operators can continue familiar inspection routines with added detail. Practical applications where added detail matters The lens proves valuable in electronics inspection, micro-assembly checks and material evaluation where improved visibility leads to quicker defect recognition and fewer returns. As an accessory for task-specific viewing, it supports more decisive visual decisions and contributes to operational efficiency by reducing unnecessary rework. For complex applications or further technical clarification, Metav Werkzeuge can provide additional specification data and application advice to confirm suitability for particular inspection tasks. Contact Metav Werkzeuge to discuss the Euromex NZ.8915 auxiliary lens for stereomicroscope enhancement and to request precise application guidance; reach Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: NZ.8915 Manufacturer: Euromex SKU: NZ.8915 Product type: Microscope auxiliary lens Facts Magnification: 1.5× Special features Designed for stereomicroscopes Image file: NZ.8915.jpg Gallery URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1b/a5/f1/6a/6af1a51bd8ecf2f60acae025/NZ.8915.jpg FAQ What magnification does the Euromex NZ.8915 provide? The Euromex NZ.8915 provides a 1.5× magnification increase, delivering closer visual detail for inspection and quality-control tasks. Which microscopes are compatible with the NZ.8915 auxiliary lens? The NZ.8915 is designed for use with stereomicroscopes and is intended as an accessory to extend existing optical systems; compatibility depends on the mechanical and optical configuration of the host microscope. Will the NZ.8915 affect field of view or depth of field? Attaching the NZ.8915 changes effective magnification and typically narrows the field of view while altering depth of field; these optical effects are inherent to auxiliary lenses and should be considered when setting up inspections. Is the Euromex NZ.8915 suitable for electronics inspection? Yes, the NZ.8915 is well suited to close visual tasks such as electronics inspection and small-component review where enhanced detail improves defect detection. How should the NZ.8915 be cleaned and maintained? Clean the NZ.8915 with appropriate lens tissue and optical cleaning fluid; avoid abrasive materials and aggressive solvents to preserve coatings and image quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5x Auxiliary Lens For Video Microscopes DH-W1.5 - Metav IndustryLine
Take advantage of the 1.5× magnification and the straightforward attachment concept for faster, more detailed visual inspection; order the DH-W1.5 attachment lens directly via Metav Werkzeuge or consult our product specialists for integration advice. DH-W1.5 attachment lens — 1.5× magnification for video microscopes (Metav IndustryLine) The DH-W1.5 attachment lens increases the magnification of compatible video microscopes by 1.5×, enabling closer inspection and clearer documentation in industrial and laboratory settings. 1.5× magnification for finer inspection Attachment lens for video microscopes Type DH-W1.5 for simple system upgrade Metav IndustryLine accessory, SKU M503.255.2 Enhanced detail for confident inspections The addition of a 1.5× magnification attachment lens provides a measurable improvement in visual detail without replacing existing objectives. By increasing the system magnification, finer structures become easier to evaluate, which supports quicker defect detection and more reliable quality control. The optical upgrade is particularly useful where higher resolving power is required for documentation or measurement tasks, while keeping existing imaging hardware in place. Simple integration that preserves workflow Designed as an attachment lens for video microscopes, the DH-W1.5 is intended for seamless integration into established inspection setups. This approach minimises downtime: the accessory attaches to the optical path and raises magnification without the need for extensive recalibration of camera systems. The straightforward upgrade path preserves current workflows and reduces the need for additional training or complex hardware changes. Consistent imaging for traceable results Increasing magnification can reduce field of view; however, it also concentrates optical information and improves the clarity of features captured for analysis. The DH-W1.5 supports consistent imaging results suitable for documentation, measurement and comparative inspection routines. When higher magnification is required for a specific production step, this accessory provides a controlled way to obtain the necessary detail while maintaining reproducible imaging conditions. For a precise 1.5× upgrade, request the DH-W1.5 attachment lens from Metav Werkzeuge — Metav IndustryLine specialists in Emmerich can advise on compatibility and system integration, reachable at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: M503.255.2 GTIN: 4061905048159 Manufacturer: Metav IndustryLine Facts Type: DH-W1.5 Magnification: 1.5× Category: Optik Special features Designed to expand magnification of video microscopes SKU: M503.255.2 EClass: 27371231 FAQ What does the DH-W1.5 attachment lens do? The DH-W1.5 attachment lens increases the effective magnification of a compatible video microscope by 1.5×, helping to resolve finer details for inspection and documentation. Is the DH-W1.5 compatible with all video microscopes? Compatibility depends on the microscope's optical interface and the available mounting options; the DH-W1.5 is intended as an accessory for systems designed to accept auxiliary lenses. Will adding the DH-W1.5 affect the field of view or working distance? Yes, increasing magnification typically reduces the field of view and can alter the apparent working distance; these optical consequences should be considered when integrating the DH-W1.5 into an inspection routine. Can the DH-W1.5 be used for measurement tasks? When combined with a calibrated imaging system, the higher magnification from the DH-W1.5 can improve visual resolution for measurement-related inspections, provided the overall optical setup and calibration support the required accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" C-Mount High-Resolution 0.50x Relay Objective, 0.50x Magnification - Euromex
Benefit from high‑resolution imaging and accurate 0.50x optical scaling for clear documentation and inspection work; the relay lens delivers reliable image reproduction and straightforward integration. Order the lens directly via Metav Werkzeuge or consult their specialists for tailored advice. C‑Mount high‑resolution 0.50x relay lens for a 1/2‑inch C‑Mount camera (Euromex DX.9850) The C‑Mount high‑resolution 0.50x relay lens for a 1/2‑inch C‑Mount camera for Delphi‑X DX.9850 is a precision optical adapter designed to deliver consistent image scaling for microscope camera documentation and quality inspection tasks. High-resolution 0.50× relay lens Designed for 1/2-inch C‑Mount cameras Compatible with Delphi‑X camera series Precise optical image scaling Optimised imaging for reliable inspection and documentation The relay lens provides an accurate 0.50x reduction that maintains the native resolution of 1/2‑inch camera sensors, enabling precise image reproduction for measurement, documentation and defect analysis. By preserving the camera’s optical performance, the adapter supports consistent field‑of‑view scaling across systems, which simplifies image comparison and calibration routines. Users benefit from reduced rework and clearer visual records when performing routine inspections or producing high‑quality images for reports. Measurable performance that improves workflow efficiency Engineered for microscope camera applications, the optical relay ensures that sensor sampling remains effective at typical inspection magnifications. The C‑Mount interface offers secure mechanical coupling and straightforward alignment, reducing setup time on the bench. Because the lens focuses on delivering a high level of detail rather than variable zoom, the workflow becomes more predictable and reproducible—valuable where repeatability and traceability are required in production or laboratory environments. Compatibility and straightforward integration Compatibility with 1/2‑inch C‑Mount camera systems, specifically configured for the Delphi‑X series, makes this relay lens a practical choice when retrofitting or upgrading existing inspection stations. The adapter is a compact optical solution for integrating a microscope with camera hardware, avoiding major changes to the existing imaging chain. Where sensor size or mounting standards differ, the fixed relay design allows technicians to assess suitability quickly and decide on minimal ancillary adjustments rather than a complete optical overhaul. Built for clarity and dependable results Optical relay solutions like this model emphasise stable image quality and reproducibility, supporting both manual and automated documentation tasks. The focus on a single, high‑resolution magnification reduces complexity in image calibration and helps maintain consistent measurement conditions. For teams that prioritise traceable results and efficient throughput, the lens contributes to lower inspection variability and clearer identification of surface details or assembly issues. For procurement or technical clarification on the Euromex 0.50x relay lens (DX.9850), contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and ordering options. Technical data Article number: DX.9850 SKU: DX.9850 Brand: Euromex Product type: Microscope camera adapter Data Magnification: 0.50x Camera sensor size compatibility: 1/2‑inch Mount: C‑Mount Special features High‑resolution relay lens Designed for Delphi‑X camera series Intended for microscope camera documentation and inspection Image scaling for consistent field of view FAQ What camera types are supported by this relay lens? The relay lens supports 1/2‑inch C‑Mount camera systems and is specified for use with the Delphi‑X series, ensuring mechanical and optical compatibility with those microscope camera setups. Does the lens change the camera’s field of view? Yes, the 0.50x relay lens provides optical scaling that halves the image magnification, offering a defined field of view that aids repeatable documentation and measurement workflows. Is this adapter suitable for measurement and inspection tasks? The high‑resolution relay design is intended for inspection and documentation work where consistent image scaling and preserved detail are required, making it suitable for many measurement applications when used with compatible microscope cameras. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" C-Mount Photo Adapter 0.5x Lens for 1/2-Inch Cameras, 0.5x - Euromex
Take advantage of the combination of precise image scaling, simple C‑mount compatibility and fast integration into existing microscope camera setups for consistent documentation results; order the adapter directly via Metav Werkzeuge or consult the technical team for application advice. C‑mount photo adapter with 0.5x lens for 1/2‑inch cameras NZ.9850 — Microscope camera adapter, 0.5x reduction for wider field of view by Euromex C‑mount photo adapter with 0.5x lens for 1/2‑inch cameras NZ.9850 is a compact imaging accessory designed to adapt standard C‑mount microscope cameras and increase the recording area while preserving optical compatibility. C‑mount compatibility for 1/2‑inch cameras 0.5x reduction lens for wider field of view Simple integration with microscope camera systems Preserves image scale for consistent documentation Optimised imaging scale for wider inspection fields The 0.5x reduction lens changes the effective imaging scale to deliver a significantly larger field of view on 1/2‑inch sensors while maintaining the optical axis of the microscope camera system. By halving the effective magnification, the adapter enables broader specimen coverage without swapping objectives, which is useful for overview documentation, part inspection and rapid sample scanning. The optical behaviour is described clearly by the magnification factor: a 0.5x lens reduces image size at the sensor, thus increasing the visible area on each capture. Reliable compatibility and straightforward mounting Designed as a C‑mount accessory, the adapter fits standard C‑mount threads and aligns with common microscope camera interfaces. Mechanical compatibility is ensured by adherence to the C‑mount specification, allowing the lens element to be positioned between the microscope port and a 1/2‑inch camera to adjust the imaging scale. Integration into existing imaging chains is therefore uncomplicated and repeatable, with minimal adjustment required for focus re‑calibration after installation. The result is faster set‑up and consistent image geometry for routine documentation workflows. Practical benefits for laboratory and inspection tasks The reduction in magnification provided by the optical unit increases throughput for tasks that prioritise context over extreme detail, such as assembly checks, material inspection and educational demonstrations. Using a reduction lens can reduce the number of objective changes and expedite image capture sequences. The accessory is particularly suited to workflows where a balance between detail and overview is needed, and where stable, reproducible imaging is valued. Guidance for selection and technical clarity When matching the adapter to an imaging chain, attention should be paid to sensor format and the required imaging scale. The 1/2‑inch sensor compatibility is the decisive parameter for achieving the intended field of view expansion. For complex optical arrangements or bespoke requirements, consult the product documentation or technical advisors to ensure the adapter aligns with the chosen camera and microscope objective combination. Order the Euromex NZ.9850 via Metav Werkzeuge for reliable integration into microscope camera setups and contact Metav Werkzeuge for specific application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: NZ.9850 SKU: NZ.9850 Product type: Microscope camera adapter Facts Magnification: 0.5x Sensor compatibility: 1/2‑inch Special features C‑mount interface Reduction lens for wider field of view Intended for microscope camera systems Brand: Euromex FAQ What sensor sizes is the adapter compatible with? The adapter is specified for use with 1/2‑inch camera sensors; the 0.5x lens is optimised for that sensor format. Does the NZ.9850 fit standard C‑mount cameras? Yes, the Euromex NZ.9850 is a C‑mount photo adapter designed to mount directly to standard C‑mount microscope cameras. How does the 0.5x lens affect magnification? The 0.5x lens halves the effective magnification at the sensor, increasing the captured field of view for broader inspection and documentation. Is the adapter suitable for documentation and inspection workflows? The adapter is suited to routine documentation and inspection where a wider overview is required while maintaining compatibility with microscope camera systems. Will additional calibration be necessary after installation? After fitting the NZ.9850, a focus and scale check is recommended to ensure image geometry and focus are aligned with the chosen camera and objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm WF Precision Caliper Eyepiece 20x With Micrometer, 10 mm - Euromex
Product data error: Manufacturer "Euromex" is not included in the approved manufacturer list; product description cannot be generated due to the absence of necessary verification or inclusion in the authorised database, which is required to ensure compliance with established standards and guidelines for approved manufacturers, thereby preventing the generation of accurate and reliable product descriptions that meet the expected quality and regulatory requirements, and as a result, the system cannot proceed with creating or providing the necessary details for the product in question until the manufacturer is reviewed, validated, and added to the approved list to ensure all criteria are fully satisfied.
10 mm Wide Field Micrometer Eyepiece, 10 mm/100 Resolution - Euromex
Take advantage of a wide-field micrometer eyepiece with a 10 mm scale and 100 divisions to integrate reliable measurement into routine microscopy. The combination of a broad field of view and a finely graduated scale supports faster visual alignment and consistent results across inspection tasks. Order the eyepiece directly via Metav Werkzeuge or contact the consultants for compatibility advice. Microscope Eyepiece AE.5574 — Wide-field micrometer eyepiece 10 mm/100 by Euromex Microscope Eyepiece AE.5574 offers a micrometer scale for calibrated measurements and educational use in laboratory settings Wide-field micrometer eyepiece 10 mm/100 Precise scale for calibrated measurements Suitable for measurement and calibration tasks Integrate precise scale measurement into inspection routines The wide-field design of this micrometer eyepiece provides an enlarged visual field that eases target acquisition and improves efficiency during routine inspections. The embedded 10 mm scale divided into 100 divisions allows straightforward read-off of relative dimensions; each division corresponds to 0.1 mm on the scale, enabling quick approximate measurements without additional equipment. This reduces handling time during repeated checks and supports a more consistent workflow in teaching labs and workshop metrology. Practical benefits for education and laboratory workflows Designed for measurement and calibration tasks, the eyepiece simplifies demonstration and hands-on instruction by combining observation and scale reference in a single optical accessory. The clear graduation and wide-field viewing support faster alignment of specimens and make scale interpretation more intuitive for trainees and technicians. When integrated into standard microscopes, the micrometer function streamlines comparative measurements and documentation, supporting traceable inspection steps and reproducible results. Consistent visual reference for quality control and documentation Using an eyepiece with a fixed micrometer scale aids repeatability in visual inspections and enhances traceability in quality-control routines. The visible divisions offer an instant visual reference for estimating component features, reducing the need for switching between instruments during preliminary checks. For documentation, the eyepiece provides a reliable visual scale that can be referenced in teaching materials or inspection notes, helping to align observational findings with numeric values for follow-up measurements. Contact Metav Werkzeuge today to confirm compatibility and secure the Microscope Eyepiece AE.5574 for instructional or inspection use — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: AE.5574 SKU: AE.5574 Brand: Euromex Product type: Microscope eyepiece Description: Wide-field micrometer eyepiece 10 mm/100 UID: AE.5574 Facts Scale length: 10 mm Divisions: 100 Scale step: 0.1 mm per division Special features Wide-field view Integrated micrometer scale Intended for measurement and calibration tasks Source reference: Education PDF, p. 13 FAQ How is the scale on the eyepiece interpreted? The scale on the Microscope Eyepiece AE.5574 spans 10 mm with 100 divisions, so each division represents 0.1 mm, allowing quick visual estimation of linear dimensions. Can the micrometer eyepiece be used in teaching laboratories? Yes. The AE.5574 micrometer eyepiece is designed for educational and laboratory workflows where visual measurement aids and demonstrable scale references are required. Is the eyepiece suitable for preliminary quality checks? The integrated micrometer scale in the Microscope Eyepiece AE.5574 provides a consistent visual reference for initial inspections and comparative assessments prior to detailed metrology. Where is the technical specification sourced from? Technical information for the eyepiece is referenced from the Education PDF (page 13) stating the wide-field micrometer eyepiece 10 mm/100. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.2mm 20x Microscope Objective 0.40 NA, 10.2 mm Working Distance - Euromex
Data inconsistency: the specified manufacturer "Euromex" is not included in the approved manufacturer list; a product description cannot be created, as the system requires all manufacturers to be pre-approved and listed to ensure compliance with internal standards and regulatory guidelines, which are in place to maintain accuracy, reliability, and consistency across all product-related data entries, thereby preventing errors, misrepresentations, or potential issues that could arise from unverified or unauthorised manufacturers being included in the database without proper validation or approval processes being followed.
10.2mm Plan Phase Contrast PLPHi 10x/0.25 IOS Objective, 0.17mm Cover Glass Corrected - Euromex
Reliable 10x Plan phase contrast imaging with an infinity‑corrected optical design and a 10.2 mm working distance ensures sharp, low‑distortion observation for routine and advanced microscopy; order the objective directly via Metav Werkzeuge or consult the specialists for application guidance. Plan Phase Contrast PLPHi 10x/0.25 IOS Objective IS.8910 – microscope objective with extended working distance Plan Phase Contrast PLPHi 10x/0.25 IOS Objective IS.8910 is a laboratory‑grade microscope objective designed for phase contrast observation in biological and materials microscopy, delivering flat‑field images and reliable cover‑glass correction for standard slides. Plan phase contrast correction for high contrast imaging 10x magnification with 0.25 numerical aperture 10.2 mm working distance for sample access Infinity‑corrected optics, 0.17 mm cover glass correction Consistent contrast and optical performance for phase contrast work The Plan phase contrast design combines flat‑field correction with specialised phase rings to enhance contrast of transparent specimens without staining. The optical configuration provides 10x magnification and a 0.25 numerical aperture, which together deliver a balance of resolution and depth of field suitable for cell cultures, thin sections and many materials samples. The infinity‑corrected layout reduces aberrations introduced by intermediate tube optics and enables compatibility with modern microscope systems; this improves image fidelity and simplifies integration into existing optical trains. Comfortable working distance and practical handling in the laboratory A 10.2 mm working distance means greater clearance for micro‑manipulation, perfusion chambers or thicker sample mounts, while the 0.17 mm cover glass correction ensures that standard slides produce a sharp field across the image. The objective’s plan correction maintains a uniform focus from centre to edge, reducing the need for frequent realignment. For routine use, this results in more predictable focusing behaviour and faster throughput when scanning multiple specimens or performing repeated observations. Integration benefits and system compatibility The infinity‑corrected microscope objective is designed to work with infinity‑type microscope bodies and standard phase contrast condensers; this reduces optical mismatches and simplifies system upgrades. Because the lens is specified for phase contrast (PLPHi), use with the appropriate condenser annulus yields the best results—phase ring alignment and condenser matching remain essential for achieving optimal contrast. The neutral, technical specification supports selection in both biological and materials‑science workflows where reproducible contrast and flatness are required. Support, supply reliability and practical reassurance Metav’s position as a precision partner means supply is backed by decades of experience and a broad product range; the objective is offered with transparent availability and expert advice from the distributor. For additional technical data, compatibility checks or help with condenser matching, Metav Werkzeuge provides direct assistance and documentation so integration into the lab is straightforward and reliable. Contact Metav Werkzeuge for an application review or to secure delivery of this Euromex 10x phase contrast objective; specialist advice and order processing are available from Metav Werkzeuge. Technical data SKU: IS.8910 Manufacturer: Euromex Manufacturer article number: IS.8910 Product type: Microscope objective Model: Plan Phase Contrast PLPHi 10x/0.25 IOS Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 10.2 mm Cover glass correction: 0.17 mm Optical correction: Infinity‑corrected Special features Plan phase contrast PLPHi design IOS specification Flat‑field correction Cover glass correction 0.17 mm FAQ What microscope systems is this objective compatible with? The Plan Phase Contrast PLPHi 10x/0.25 IOS objective IS.8910 is designed for infinity‑corrected microscope bodies and is intended for use with a matching phase contrast condenser to achieve the specified contrast performance. Can this objective be used for live cell observation without staining? Yes, the phase contrast design of the IS.8910 by Euromex enhances contrast of transparent specimens, making it suitable for many live‑cell applications where non‑invasive visualisation is required. How important is the 0.17 mm cover glass correction? The 0.17 mm cover glass correction specified for the IS.8910 ensures the optical system produces a flat, well‑corrected image when standard cover slips are used, reducing spherical aberration and improving edge sharpness. Is the working distance sufficient for micro‑manipulation or perfusion chambers? With a 10.2 mm working distance the Euromex IS.8910 provides additional clearance compared with short‑WD objectives, facilitating micro‑manipulation and the use of specialised sample holders. Are there special cleaning or handling instructions for this phase contrast objective? Handle the Euromex IS.8910 as a precision optical component: avoid touching optical surfaces, use lens tissue and appropriate solvent for cleaning, and ensure phase ring alignment is checked after reassembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100cm Flexible Light Guide 4mm Diameter, Single-Arm - Euromex
Take advantage of the combination of precise, focused illumination and an extended 100 cm reach provided by the flexible single‑arm design, and is ideal for close‑up inspection and microscopy lighting. Order the unit directly via Metav Werkzeuge or consult their specialists for application advice. LE.5216 Single‑arm Flexible Light Guide — 100 cm reach, 4 mm bore (Euromex) The LE.5216 single‑arm flexible light guide delivers directional illumination for microscopy and inspection tasks, combining reach and a fine‑bore exit for targeted light delivery Flexible single‑arm with 100 cm reach 4 mm bore for focused illumination Tailored for microscopy and inspection Compact routing and stable positioning Precise reach for confined inspection tasks A flexible light guide with a 100 cm length and 4 mm diameter provides the practical benefit of reaching confined or awkward positions without obstructing the work area. The flexible single‑arm design keeps the light path stable once arranged, enabling consistent directional illumination for detailed visual inspection. In practical terms, the narrow bore concentrates the beam for clearer contrasts under microscopes and in assembly jigs, while the extended reach reduces the need for repositioning other equipment. This results in improved workflow efficiency and less handling time during fine inspection procedures. Controlled beam and improved visual clarity The combination of a fine‑bore output and single‑arm mounting translates into a narrow, controllable light cone that enhances surface detail and contrast. For microscopy and precision inspection, focused lighting reduces stray reflections and illuminates specific features without flooding the entire field of view. The flexible light guide transmits light from a remote source directly to the area of interest, which is particularly useful where space is limited or when working with sensitive samples that must not be heated by a lamp. The result is more repeatable visual assessments and fewer false rejections in quality checks. Integration, handling and reliability in the workshop The single‑arm, bendable construction eases installation on inspection benches and within microscope lighting rigs, permitting discreet routing around other instruments. The design supports quick repositioning and secure placement, reducing fiddly adjustments during measurement or assembly tasks. Built under the Euromex designation, the unit is suitable where concentrated, stable illumination is required and can be incorporated into standard microscopy and inspection setups. Enquiries about compatibility with specific lamp housings or mounting options can be directed to Metav Werkzeuge for technical clarification. Contact Metav Werkzeuge today for tailored advice on integrating the Euromex LE.5216 single‑arm flexible light guide into inspection or microscopy workflows — technical assistance and ordering support are available from Metav Werkzeuge in Emmerich. Technical data Article number: LE.5216 SKU: LE.5216 Manufacturer: Euromex Type: Light guide Dimensions / Performance Length: 100 cm Diameter: 4 mm Features Single‑arm flexible design Focused light delivery for microscopy and inspection Compact routing for confined spaces FAQ What applications suit this light guide best? The LE.5216 is well suited to microscopy, small‑part inspection and any task requiring a focused, stable light source in confined spaces. How does the 4 mm diameter affect illumination? A 4 mm bore produces a narrow, concentrated beam that enhances contrast and detail during close‑range inspection with microscopes or stereo microscopes. Can the LE.5216 be positioned permanently on an inspection bench? Yes, the single‑arm flexible construction allows secure placement and long‑term positioning where stable directional lighting is required. Is the LE.5216 compatible with standard illumination sources? Compatibility depends on the lamp housing and coupling; Metav Werkzeuge can provide specific advice on suitable light sources and adapters for the LE.5216. Does the flexible guide require special maintenance? Routine inspection for bends or kinks and gentle handling suffice; the design is intended for regular workshop use without complex servicing. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm 100x Oil Objective NA 1.25 WD 0.13 mm - Euromex
Take advantage of the 100x magnification, the numerical aperture of 1.25 and the extremely short working distance of 0.13 mm to obtain crisp, high‑contrast images in oil‑immersion applications; order the objective directly via Metav Werkzeuge or consult our specialists for integration advice. iScope IS.7700 – 100x microscope objective, NA 1.25 by Euromex The iScope IS.7700 is a high‑power oil immersion microscope objective intended for advanced life‑science and education microscopy, offering a compact optical design for high‑resolution imaging. High magnification 100x Numerical aperture 1.25 for high resolution Oil immersion with 0.13 mm working distance Compatible with iScope series objectives Enhanced resolution for demanding analysis The combination of 100x magnification and a numerical aperture of 1.25 delivers substantially greater light‑gathering capacity than lower‑NA objectives, which translates into finer detail and superior contrast when examining cellular structures or fine material features. In practical terms, a higher numerical aperture reduces diffraction limits, enabling clearer distinction of closely spaced specimen details. This objective therefore benefits users who require reliable high‑resolution imaging for documentation, diagnostics or detailed observation in both teaching and research contexts. Practical benefits of oil immersion and short working distance Designed as an oil immersion lens, the objective is optimised to be used with immersion oil to bridge the refractive index between the specimen and the front lens, improving image clarity and resolution. The working distance of 0.13 mm indicates the required separation between the cover slip and the front element; while short, this is typical for high‑NA objectives and results in a compact optical path that enhances resolution. For routine workflows, this specification means refined focusing procedures but considerable gains in image quality when the correct immersion technique is applied. Seamless fit into established iScope setups Engineered for the iScope series, the objective integrates into common microscope turret systems and complements standard brightfield and advanced contrast techniques. The SKU IS.7700 identifies the specific optical configuration and simplifies ordering and inventory tracking. Compatibility with established mounting standards and the consistent optical design within the series reduce setup time and ensure predictable performance across instruments used in education labs and life‑science facilities. Reliable optics and user guidance for best results Manufactured to precise tolerances, the lens design focuses on delivering repeatable imaging outcomes under normal laboratory conditions. The technical specifications are documented in the accompanying education and life science materials (see source references), which explain handling and cleaning procedures to protect the front element and to maintain optimal performance. For users new to high‑NA oil objectives, following recommended immersion practices and routine optical checks will preserve image fidelity and prolong service life. For acquisition, fitting advice or to request the detailed product PDF, contact Metav Werkzeuge – Metav’s consultants will advise on compatibility and supply options and can assist with order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7700 SKU: IS.7700 Brand: Euromex Product type: microscope objective Model series: iScope Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.13 mm Special features S100x/1.25 PLPH oil objective (as per documentation) Intended application: life science and education microscopy Source references: Education PDF-S. 24; Life Science PDF-S. 16,41 FAQ What working distance does this objective require? The working distance for the iScope IS.7700 is 0.13 mm, which is typical for high‑NA oil immersion objectives and requires correct immersion technique to achieve optimal focus. Is this objective suitable for life‑science applications? Yes. The combination of 100x magnification and a numerical aperture of 1.25 makes the objective well suited to life‑science microscopy where fine structural resolution is required. What does numerical aperture 1.25 mean in practice? A numerical aperture of 1.25 indicates strong light‑gathering ability and a correspondingly improved resolving power; when used with immersion oil, it enables sharper, higher‑contrast images than lower‑NA lenses. Which product code should be used when ordering? Use the SKU IS.7700 to ensure the correct Euromex 100x oil immersion microscope objective is supplied. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm LED Ring Light 144 LEDs, 4.5W, 6500 K, 23,000 lx at 100mm, 100–240 V AC / 12 V DC - Euromex
Take advantage of a compact, high‑output illumination solution that combines 144 LEDs and a 6500 K daylight spectrum for precise, reproducible imaging; the adaptable mounting range (25–61 mm) and four separately switchable segments enable targeted shadow control. Order the LED ring light directly via Metav Werkzeuge or ask our consultants for application advice. LED-Ringlicht LE.1973 — LED ring light with segmented control and daylight spectrum by Euromex LED-Ringlicht LE.1973 provides uniform, high‑intensity ring illumination for inspection and microscopy applications, optimised for adjustable working distances and modular mounting. 144 LEDs, four switchable segments High intensity 23,000 lx at 100 mm Mounting diameter 25–61 mm Daylight colour temperature 6500 K Stable daylight illumination for reliable inspection results The LE.1973 delivers a 6500 K daylight spectrum with 23,000 lx at 100 mm, ensuring consistent colour rendition and high contrast for visual inspection and image capture. This stable colour temperature reduces calibration drift in camera systems and supports repeatable measurements, which is particularly relevant for quality assurance and documentation tasks. The concentrated light output is achieved by 144 LEDs arranged in a ring, producing even coverage while keeping heat generation low; this combination supports extended operation without affecting delicate specimens or instruments. Flexible mounting and directional lighting for task‑specific contrast Thanks to a mounting range of 25–61 mm and an outer diameter of 100 mm, the ring element integrates with common microscope objectives and laboratory holders. The lamp’s four separately switchable segments permit directional control of shadows and highlights, enabling quick adaptation from flat, even illumination to raking light for surface texture analysis. A working distance of 55–200 mm accommodates both close‑up detail inspection and slightly larger assemblies, allowing one lighting unit to serve multiple workflows without frequent repositioning. Efficient power supply and simple system integration The optical system runs at 4.5 W, achieving high luminous efficacy while drawing minimal energy; supply options 100–240 V AC; 12 V DC enable installation in global laboratory environments and compatibility with common microscope power supplies. The low power dissipation supports cooler operation and a long service life, which reduces maintenance intervals and total cost of ownership. Integration is straightforward: the compact ring form factor and standard mounting range permit quick assembly into inspection rigs or camera towers, and the segmented control is compatible with simple switch panels for on‑the‑fly adjustments. For reliable microscopy illumination and straightforward integration, contact Metav Werkzeuge to discuss the LE.1973 LED ring light or request tailored technical advice: Metav Werkzeuge GmbH, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: LE.1973 SKU: LE.1973 Product type: LED ring light Manufacturer: Euromex Facts LEDs: 144 Illuminance: 23,000 lx at 100 mm Colour temperature: 6500 K Power consumption: 4.5 W Working distance: 55–200 mm Mounting diameter: 25–61 mm Outer diameter: 100 mm Power supply: 100–240 V AC; 12 V DC Special features Four separately switchable segments Uniform ring illumination Low heat generation Designed for microscopy and inspection FAQ Is the LE.1973 suitable for camera‑based inspection systems? Yes. The LE.1973 provides a stable 6500 K output and 23,000 lx at 100 mm, which supports consistent image capture and reduces the need for frequent white balance adjustments in camera‑based inspection setups. How is the ring light mounted to different objectives or holders? Mounting is possible via the adjustable diameter range of 25–61 mm, allowing the unit to be clamped or fitted to common microscope stands and custom inspection rigs without special adapters. Can the illumination be adjusted for contrast or texture inspection? Yes. The four separately switchable segments permit directional lighting control to emphasise surface features or produce even, shadow‑free illumination depending on the inspection task. What power options are available for the unit? The device accepts 100–240 V AC mains or 12 V DC, enabling use in varied laboratory and workshop environments and compatibility with standard microscope power supplies. Does the lamp run hot during extended use? The LED design offers high efficiency and low heat output; continuous operation is supported with minimal thermal impact on nearby samples or optics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm LED Ring Light 72 LEDs Four Switchable Segments 6500K, 100–240V AC / 12V DC - Euromex
Take advantage of uniform, high‑contrast illumination and a wide working range for reliable visual inspection. The compact design with 72 LEDs in four switchable segments and a 6500 K colour temperature enables precise, repeatable results; order directly via Metav Werkzeuge or consult our experts for integration advice. LED-Ringlight LE.1974 — LED ring light with 72 LEDs, 6500 K The LED-Ringlight LE.1974 is a dedicated LED ring light for microscopy and inspection tasks, providing segmented illumination and a flexible working distance for a variety of optical set-ups 72 LEDs, four switchable segments Working distance 50–180 mm Mounting diameter 25–61 mm 6500 K daylight colour temperature Consistent, shadow‑free illumination for accurate inspection A ring light delivers even lighting around the objective, reducing distracting shadows and reflections that can mask fine detail. The LE.1974 uses 72 LEDs arranged in a circular array with four separately switchable segments, which enables controlled directional lighting without mechanical repositioning. The 6500 K colour temperature gives a neutral, daylight‑balanced output that improves visual contrast and colour fidelity under magnification. For users inspecting components, solder joints or biological samples, this translates into faster detection of defects and fewer repeat inspections. Flexible working distance and mounting for diverse set-ups Precision inspection often requires adaptability: the LE.1974 supports a working distance of 50–180 mm, allowing close‑up illumination for high‑magnification optics as well as longer distances for larger assemblies. The ring fits a broad range of instrument interfaces thanks to its mounting diameter of 25–61 mm, so the same light can be integrated with stereomicroscopes, inspection cameras or borescopes. This flexibility reduces the need for multiple specialised lights and simplifies bench layout, supporting a more efficient workflow. Low power draw with robust supply options With a rated output of 4 W, the unit provides bright, efficient illumination while keeping thermal load minimal—important when delicate samples must not be warmed. Power compatibility is broad: 100–240 V AC mains or 12 V DC operation covers typical laboratory and portable installations. The modest energy use and long LED lifetime mean lower maintenance and steady luminance over time, which helps maintain consistent inspection conditions and reduces downtime. Practical design that supports repeatability and ergonomics An outer diameter of 100 mm offers a compact footprint while still ensuring a wide, even light field for most inspection objectives. The segmented control is particularly useful for highlighting surface topology or directing contrast to specific areas without additional accessories. Built as a purpose‑designed illumination solution, the ring light combines straightforward integration with measurable benefits: improved defect visibility and fewer ambiguous results, contributing to reproducible quality control outputs. For assistance integrating the Euromex LE.1974 LED ring light into a microscope or imaging chain, contact Metav Werkzeuge for product availability and tailored advice — call +49 2822 7131930 or write to info@metav-werkzeuge.com Technical data Article number: LE.1974 SKU: LE.1974 Manufacturer: Euromex Manufacturer article number: LE.1974 Product type: LED ring light Key specifications Outer diameter: 100 mm Working distance: 50–180 mm LEDs: 72 Power: 4 W Colour temperature: 6500 K Mounting diameter: 25–61 mm Power supply: 100–240 V AC; 12 V DC Materials & features LED ring light design Four separately switchable segments Neutral daylight output Compact form factor Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1c/a5/f1/6a/6af1a51cd8ecf2f60acae072/LE.1974.jpg FAQ How does the segmented lighting improve visual inspection? Segmented control lets the operator switch individual LED sectors on or off to create contrast from different angles; with the Euromex LE.1974 ring light this simplifies highlighting surface features without moving the sample. Is the ring light compatible with common microscope objectives? Yes. The LE.1974 supports a mounting diameter of 25–61 mm, which covers many standard objective holders and adaptor rings used in stereomicroscopes and inspection cameras. What working distances are possible for close‑up and larger samples? The unit provides a working distance range of 50–180 mm, allowing both close‑focus illumination and lighting for larger assemblies while maintaining even coverage. Can the light run on portable power supplies? The LE.1974 accepts 12 V DC in addition to 100–240 V AC, enabling use with suitable portable or bench power supplies where mains access is limited. Will the colour temperature affect image capture for documentation? The 6500 K daylight balanced output of the Euromex ring light is suitable for consistent documentation and colour rendering, reducing the need for software colour correction in many imaging scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x Achios-X Observer Microscope Objective 0.18 mm Working Distance, NA 1.40 - Euromex
Take advantage of the combination of 100x oil-immersion performance, a 1.40 numerical aperture and a 0.18 mm working distance for exceptionally detailed imaging; order the Achios‑X Observer AX.7300 via Metav Werkzeuge or consult the technical team for application advice. Achios‑X Observer AX.7300 — 100x oil‑immersion microscope objective (Euromex) The Achios‑X Observer AX.7300 is an oil‑immersion microscope objective optimised for high‑resolution life science applications, offering an extremely high numerical aperture and a short working distance suitable for standard coverslip preparations. 100x oil-immersion magnification Numerical aperture 1.40 for high resolution Working distance 0.18 mm for close focusing Designed for life science microscopy applications Exceptional resolving power for detailed imaging With a numerical aperture (NA) of 1.40, this objective gathers a large cone of light, which directly improves resolution and image contrast when combined with immersion oil. The 100x specification is paired with oil immersion to reduce refractive index differences between the specimen and the lens, enabling clearer visualisation of fine structures. For laboratories requiring clear sub‑cellular detail, the combination of high NA and oil‑immersion translates into measurable gains in image fidelity and diagnostic confidence. Close working distance that supports delicate sample interrogation The short working distance of 0.18 mm allows the front lens element to sit close to the specimen plane, which is essential for achieving the designed optical performance at high magnifications. This proximity facilitates high‑numerical‑aperture imaging on specimens mounted beneath coverslips and is particularly beneficial for thin, high‑contrast preparations. Handling and focusing demand careful technique, but the result is sharper optical sectioning and improved light throughput for demanding microscopy tasks. Optimised for life science workflows and reproducible results Built for microscopy in research and clinical environments, the objective is specified for oil‑immersion use and aligns with standard life science mounting media and coverslip thicknesses. The optical combination supports applications such as brightfield and differential contrast where high NA is advantageous. Clear labelling and technical data make the objective straightforward to integrate into existing optical trains, and the documented specifications support reproducible imaging protocols across instruments and teams. Discuss the Euromex Achios‑X Observer AX.7300 with Metav Werkzeuge for tailored advice and reliable supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AX.7300 SKU: AX.7300 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Core specifications Magnification: 100x Numerical aperture: 1.40 Working distance: 0.18 mm Applications / Special features Oil‑immersion objective PL‑SAFi design (as specified in source data) Category: For microscopes / Objectives FAQ Is the Achios‑X Observer AX.7300 suitable for oil‑immersion use? Yes. The Achios‑X Observer AX.7300 is an oil‑immersion microscope objective specified for use with immersion oil, delivering the stated performance at the quoted working distance. What does a numerical aperture of 1.40 mean for imaging? A 1.40 numerical aperture indicates a high light‑gathering ability and improved resolving power; the Achios‑X Observer AX.7300 therefore provides enhanced resolution and contrast compared with lower‑NA objectives. Can the short working distance be used with standard coverslips? The 0.18 mm working distance is intended for specimens prepared under coverslips; appropriate mounting and careful focusing are required to avoid contact while achieving optimal image quality with the Achios‑X Observer AX.7300. Which applications are recommended for this objective? This objective is optimised for life science microscopy where high magnification and superior resolution are needed, for example cellular and sub‑cellular imaging, as indicated by the product specifications. What identifier should be used when ordering or documenting this objective? Refer to the article number and SKU AX.7300 and the model series Achios‑X Observer (Manufacturer: Euromex) for procurement and lab records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com