The combination of 100x magnification, numerical aperture 1.25 and an oil-immersion design delivers markedly higher resolving power for demanding microscopy tasks; the close 0.2 mm working distance supports fine focusing on thin samples. Order the lens via Metav Werkzeuge or contact the consultants for matching objectives and accessories. AE.5601 microscope objective — Euromex 100x oil-immersion, NA 1.25 The AE.5601 microscope objective is an oil-immersion lens intended for high-resolution imaging in laboratory and educational microscopy, optimised for applications that require fine structural detail. 100x magnification for fine detail Numerical aperture 1.25 for high resolution Oil-immersion design for increased contrast 0.2 mm working distance for close focusing Achieve greater resolving power for detailed analysis With a 100x magnification coupled to a numerical aperture 1.25, this objective significantly increases the ability to distinguish closely spaced structures. The numerical aperture expresses the lens's light-gathering and resolving capability; a higher value permits finer spatial resolution and improved image sharpness. For microscopy tasks where resolving cellular or sub-cellular detail is crucial, the enhanced optical throughput reduces the need for repeated captures and supports reliable, reproducible observations. The design is aligned with laboratory workflows that prioritise precision and traceable results. Improved contrast and clarity through oil immersion The oil-immersion configuration lowers refraction between the cover slip and the lens, which increases the effective aperture and yields superior contrast at high magnification. This benefit is especially apparent on specimens with low intrinsic contrast or when visualising fine surface features. The trade-off is the requirement for correct immersion oil and careful cleaning routines after use; appropriate handling preserves optical performance and extends service life. For technicians and educators, the combination of high NA and oil coupling translates into clearer images with less post-processing, supporting faster decision-making in inspection, teaching and research contexts. Precision focusing for thin specimens and routine use A 0.2 mm working distance indicates the lens is engineered for close proximity to the specimen, offering precise focal control on thin preparations such as blood smears, bacterial films or thin tissue sections. The short working distance enhances stability when using high magnification but requires attention to sample preparation and cover-slip thickness to avoid contact. Mechanically, the objective is suitable for standard microscope turret systems that accept oil-immersion elements; verify compatibility with tube length and mounting standards as part of system integration. Robust optical construction supports frequent use in teaching labs and routine inspection benches where repeatable performance is essential. For laboratories seeking dependable high-resolution oil-immersion optics, request further technical matching and procurement through Metav Werkzeuge — expert advice and accessory recommendations are available to ensure optimal installation and use. Technical data Article number: AE.5601 SKU: AE.5601 Type: Microscope objective Brand: Euromex Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.2 mm Immersion: Oil Special features S100x/1.25 oil immersion SMP objective Suitable for high-resolution laboratory and educational microscopy FAQ What optical performance can be expected from this objective? The AE.5601 microscope objective by Euromex offers 100x magnification and a numerical aperture of 1.25, delivering high resolving power and improved contrast when used with immersion oil. Is this lens suitable for biological thin-section work? Yes, the oil-immersion design and the 0.2 mm working distance make the objective appropriate for thin biological specimens, provided correct cover-slip thickness and immersion oil are used. How should the oil be handled and cleaned after use? After using the AE.5601 oil-immersion objective, remove oil with lens-grade cleaning solution and lint-free tissue to maintain optical performance and prevent residue build-up. Can this objective be used on any standard research microscope? The AE.5601 is designed as a standard oil-immersion objective; compatibility depends on the microscope’s turret and tube-length specifications, so checking mechanical fit is recommended. What practical benefits does the high numerical aperture provide? A numerical aperture of 1.25 increases light collection and resolution, resulting in clearer, more detailed images and reducing the need for extensive image processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Product data error: the manufacturer "Euromex" is not included in the approved manufacturer list; please verify the product's brand information, ensure that the details provided align with the authorised manufacturers, and confirm whether the product meets the necessary compliance requirements or if additional steps are needed to rectify the discrepancy before proceeding with any further actions or decisions related to this item.

The compact stage combines a reliably sized working surface with a central glass plate for transmitted-light observation, giving a stable, versatile platform for routine microscopy. Order the unit directly via Metav Werkzeuge or contact their consultants for tailored advice and secure delivery. Euromex AE.1896 microscope stage — 145 x 115 mm with central glass plate Euromex AE.1896 is a compact microscope stage designed for precise specimen positioning in standard laboratory and educational setups. Stage size 145 x 115 mm Central glass plate for transmitted light Compact, stable platform for microscopes Article number AE.1896 Accurate specimen positioning for consistent results A clearly defined working area of 145 x 115 mm offers a predictable footprint for trays, slides and small fixtures; this measured format supports reproducible specimen placement across multiple tasks. The central glass plate is intended for transmitted-light applications, enabling illumination from below without additional stage modification. Together, the compact dimensions and glass insert provide a practical balance of precision and visibility that assists routine inspection and documentation workflows. Stable platform engineered for straightforward integration Engineered as a simple yet robust accessory, the stage provides a stable platform that reduces lateral movement during observation. The unobtrusive design keeps the optical path clear while allowing other microscope accessories to remain accessible. Its form factor suits benches and teaching microscopes where space is at a premium, offering a dependable support surface without complex mounting requirements. This reliability helps to maintain measurement consistency and reduces time spent on repositioning. Practical benefits in laboratory and classroom environments Designed with everyday use in mind, the stage assists tasks such as sample preparation, quality checks and instructional demonstrations. The glass plate simplifies transmitted-light inspection, improving contrast for thin or translucent specimens and making visual assessment more efficient. The compact stage format also eases storage and transport between workstations, supporting flexible lab layouts and shared equipment pools without compromising on handling comfort or visual access. Handling and upkeep for long service life The central glass insert can be kept clear with routine cleaning using appropriate, microscope-safe agents and lint-free wipes, preserving optical clarity and reducing artefacts in observation. The simple construction minimises strands and crevices where contaminants can accumulate, so maintenance is quick and predictable. Careful handling during slide placement and removal further extends the practical lifespan of the stage while ensuring consistent performance. For professional specimen handling with reliable visibility and repeatable placement, request the Euromex AE.1896 via Metav Werkzeuge — experienced consultants in Emmerich can advise on compatibility and delivery; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements Technical Data Article number: AE.1896 SKU: AE.1896 Manufacturer: Euromex Product type: Microscope stage Facts Stage size: 145 x 115 mm Central glass plate: yes Special features Central glass plate for transmitted-light observation Compact footprint for laboratory and teaching use FAQ What are the exact dimensions of the stage? The stage measures 145 x 115 mm; these dimensions refer to the working surface of the Euromex AE.1896 microscope stage. Is the central glass plate suitable for transmitted-light illumination? Yes, the central glass plate in the Euromex AE.1896 is intended to facilitate transmitted-light observation and to improve contrast for thin or translucent specimens. Which article number and brand identify this stage? The product is the Euromex AE.1896 microscope stage, article number and SKU AE.1896. What typical applications suit this stage? The compact stage is suitable for routine laboratory inspection, educational demonstrations and general microscopy tasks where a stable, accessible working surface is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the 1.25 NA Abbe design and the integrated slot for darkfield and phase contrast sliders; precise, uniform illumination and simple integration into teaching and routine inspection workflows support reliable imaging. Order the condenser directly via Metav Werkzeuge or consult our specialists for application guidance. iScope IS.9102 condenser — 1.25 NA Abbe condenser with darkfield & phase contrast slot (Euromex) The iScope IS.9102 is a condenser for microscopes, engineered to deliver high‑numerical‑aperture illumination for brightfield, darkfield and phase contrast techniques in educational and laboratory environments 1.25 NA Abbe condenser Slot for darkfield and phase contrast sliders Stable, uniform illumination Compatible with iScope microscope series High‑NA illumination for sharper, brighter images The core advantage of an Abbe condenser with 1.25 NA is improved light gathering, which directly enhances image resolution and contrast under high‑magnification objectives. Numerical aperture (NA) is a technical measure of how much light an optical component can collect; a higher NA allows finer detail to be resolved and provides brighter images at equivalent settings. For routine microscopy and teaching laboratories, this translates into clearer specimen detail without resorting to excessive illumination that can damage delicate samples. The condenser’s classic design is geared towards dependable optical performance while remaining straightforward to align and maintain. Flexible contrast techniques with fast, secure swapping The built‑in slot for darkfield and phase contrast sliders lets users change contrast methods quickly, avoiding lengthy reconfiguration. Darkfield increases visibility of transparent specimens by scattering light into the objective, while phase contrast converts small optical path differences into intensity variations for imaging unstained cells. Having a condenser that supports both techniques reduces equipment complexity and enables a single illumination system to serve diverse sample types. The design ensures precise positioning of sliders so that the desired contrast method is reproducible across sessions, aiding consistent results for teaching demonstrations or comparative experiments. Integration, reliability and practical benefits for labs Manufactured to fit the iScope series and similar microscope stands, the condenser offers straightforward mechanical integration and optical matching. Durable construction and standard mating dimensions simplify replacement and upgrades in multi‑station labs. For technicians and educators, the IS.9102 delivers reliable alignment and consistent illumination control, reducing time spent on set‑up and increasing productive bench time. Where users are new to microscopy, the unit’s compatibility with common contrast accessories provides a gentle learning curve: technical terms such as NA, condenser aperture and slider function are readily demonstrated with practical results, making the component suitable for both novices and experienced operators. Contact Metav Werkzeuge for personalised advice on the Euromex iScope IS.9102 condenser and to discuss compatibility, delivery and integration from our Emmerich location Technical Data Article number: IS.9102 SKU: IS.9102 Label: Kondensor iScope IS.9102 Manufacturer: Euromex Model series: iScope Product type: Condenser Facts Numerical aperture: 1.25 NA Special features Standard Abbe condenser design Slot for darkfield and phase contrast sliders Source: Education PDF (Life Science) FAQ What does 1.25 NA mean for routine microscopy? A higher 1.25 NA improves light collection and resolution; the Euromex iScope IS.9102 condenser provides brighter, sharper images under high‑magnification objectives, helping to reveal finer specimen detail. Can the condenser be used for phase contrast work? Yes. The condenser includes a dedicated slot for phase contrast sliders, enabling the iScope IS.9102 to support phase contrast methods when combined with matching phase objectives. Is darkfield microscopy supported by this condenser? Yes. The integrated slot accepts darkfield sliders so the condenser can be configured for darkfield illumination without additional optical rearrangement. Which microscope stands is this condenser compatible with? The condenser is designed for the iScope series and comparable microscope stands with standard condenser fittings; compatibility ensures straightforward mechanical and optical integration. How does the condenser benefit teaching laboratories? With simple slider changes for contrast and a robust Abbe design, the iScope IS.9102 offers reproducible results and an accessible platform for demonstrating contrast techniques to students. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise darkfield illumination and simple integration with standard Abbe condensers to improve contrast for transparent specimens; combine reliable construction with straightforward handling for consistent microscopy results. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. bScope BS.9170 Darkfield stop slider for standard Abbe condensers bScope BS.9170 is a darkfield stop slider designed for use with standard Abbe condensers, offering a compact solution to achieve high-contrast illumination of transparent samples in teaching and routine laboratory work. Compact darkfield slider for Abbe condensers Fits condensers with a standard slot Enables high-contrast illumination of samples Robust mounting for secure installation Enhanced contrast for transparent specimens The darkfield insert provides a controlled annular aperture that redirects illumination away from the objective axis, producing a bright-field specimen outline against a dark background. This method emphasises edges and fine structures in unstained biological samples and thin transparent materials, delivering high-contrast images without additional staining. The optical principle is efficient for detecting minute features such as cell boundaries, fibres and surface defects, making the accessory particularly valuable in educational settings and routine inspections where visual clarity is essential. Compatibility with standard Abbe condensers and easy fitting Designed as a slider for condensers with a slot, the accessory ensures compatibility with most standard Abbe condenser housings used in life-science and teaching microscopes. The compact format allows for fast insertion and removal, enabling seamless switching between brightfield and darkfield techniques during observation sessions. Because the component aligns with the condenser slot, mechanical integration is straightforward and repeatable, reducing alignment time and supporting consistent illumination geometry across multiple users and instruments. Practical benefits for laboratories and classrooms The accessory contributes to workflow efficiency by reducing setup complexity when darkfield is required intermittently. Its simple mechanical design minimises maintenance needs, while the sturdy mounting improves positional stability during routine use. For trainers and laboratory technicians, the accessory offers a reliable means to demonstrate contrast-enhancing optics and to perform quick visual checks on transparent specimens, combining educational value with practical inspection capability. Purpose and application notes This darkfield slider is suitable wherever high-contrast visualisation of translucent samples is required and where a standard Abbe condenser with a slot is available. The accessory complements transmitted-light microscopy techniques and supports common life-science and teaching applications. For detailed optical compatibility with a specific microscope model or condenser type, consult the available product references and technical documents provided by the manufacturer. Contact Metav Werkzeuge today for ordering information, compatibility checks or application guidance — Metav’s specialists can advise on integrating the bScope BS.9170 into existing microscopy setups and supply the accessory directly from Emmerich. Technical Data Article number: BS.9170 SKU: BS.9170 Brand: Euromex Model series: bScope Facts Compatibility: standard Abbe condenser slot Product type: darkfield stop / slider Source reference: Education PDF S. 21; Life Science PDF S. 9,39 Special features Darkfield stop slider for Abbe condensers Compact, slot-mounted format Suitable for teaching and life-science microscopy FAQ What is the primary function of this darkfield slider? The darkfield slider creates an annular illumination path so that the specimen appears bright against a dark background, improving visibility of fine details with the bScope BS.9170 darkfield stop. Will the slider fit any condenser? The slider is intended for condensers that accept a standard slot; compatibility depends on the condenser design and slot dimensions, so checking the condenser specifications is advised. Can the darkfield slider be used for both teaching and routine inspection? Yes, the accessory is designed for educational demonstrations and routine laboratory inspections where enhanced contrast without staining is required. Is any additional optical adjustment necessary after insertion? Basic condenser alignment may be required to centre the illumination and achieve optimal darkfield effect; the slider’s slot format supports repeatable positioning. Where does the product information originate from? Technical references for the accessory are cited in the Education and Life Science PDFs (Education PDF S. 21; Life Science PDF S. 9,39), which detail the slider’s application and compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Robust Gorilla Glass on a left-handed layout delivers secure sample support and reliable illumination compatibility, ideal for repeatable microscopy workflows — order via Metav Werkzeuge or request tailored advice from our consultants. DX.9501-L left-handed microscope stage with Gorilla Glass and specimen holder — Euromex The DX.9501-L is a left-handed microscope stage engineered for precise sample positioning, featuring a Gorilla Glass work surface, a central aperture for transmitted light and an integrated specimen holder for stable handling. Gorilla Glass work surface for scratch resistance Left-handed layout for ergonomic handling Integrated specimen holder and aperture for illumination Robust mounting for stable positioning Durable surface for dependable sample handling The stage is fitted with a Gorilla Glass top that combines high hardness with excellent optical clarity; this surface reduces wear and is scratch resistant, so samples remain flat and visible over prolonged use. For routine inspection tasks, the durable top lowers maintenance requirements and extends service intervals, which supports steady throughput in busy laboratories. The material’s optical stability also helps to maintain consistent image quality when used with transmitted or reflected illumination. Ergonomic left-handed configuration to streamline workflows A left-handed layout positions controls and the specimen holder to suit left-handed operation, improving ergonomic access and reducing repositioning time during repetitive tasks. In workstations where left-handed handling is the norm, this orientation supports smoother sample exchange and faster processing. The design emphasises efficient handling while preserving precise alignment, so handling speed is increased without compromising positional accuracy. Secure specimen fixation and illumination compatibility An integrated specimen holder secures slides and small samples while the central aperture provides compatibility with transmitted-light setups; this enables brightfield or other illumination techniques to be used without additional modifications. The mounting is engineered for stable positioning, limiting sample drift during inspection and ensuring reproducible observation conditions. For applications that require quick changeovers and consistent sample presentation, the combination of holder and aperture reduces setup time and improves data reliability. Contact Metav Werkzeuge for tailored advice on integrating the DX.9501-L into existing microscope stations, or request detailed technical information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: DX.9501-L SKU: DX.9501-L Manufacturer: Euromex Facts Image file size: 93995 Special features Gorilla Glass work surface Central hole / aperture for transmitted light Integrated specimen holder Left-handed configuration Microscopy accessory: microscope stage FAQ Is the stage suitable for transmitted-light microscopy? The DX.9501-L includes a central aperture specifically to permit transmitted-light methods, making the stage compatible with brightfield illumination setups. Can the left-handed stage be used in a right-handed workstation? The stage is designed for left-handed operation; while it can be installed in a right-handed workstation, the ergonomic benefits will be reduced compared with a right-handed configuration. What advantage does Gorilla Glass provide for a microscope stage? Gorilla Glass offers high hardness and optical clarity, providing a scratch-resistant and stable contact surface that supports repeatable imaging and reduces maintenance. Is the specimen holder adjustable for different slide sizes? The integrated specimen holder is intended for secure fixation of standard slides and small samples; adjustability details should be confirmed with Metav Werkzeuge for specific sample types. Who supplies technical information and spare parts for this stage? Technical enquiries and spare-part information can be obtained from Metav Werkzeuge, which provides product guidance and ordering support for microscopy accessories. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: the product specifies "Euromex" as the manufacturer, but this brand is not included in the authorised manufacturer list provided, which raises concerns about the accuracy and validity of the information supplied for this product. We are unable to generate a compliant product description due to this discrepancy, as it is essential to ensure all details align with the approved standards and regulations. Please supply a manufacturer from the approved list or correct the manufacturer information so the description can be produced accurately and in compliance with the necessary guidelines, ensuring the product meets all required specifications and standards for approval.

Combining precise PID temperature control with compatibility for stereo microscopes, this heated stage delivers stable sample conditions up to 50 °C; order directly via Metav Werkzeuge or contact our consultants for integration advice. Euromex AE.5168-NZ — microscope stage with PID-controlled heating up to 50 °C Euromex AE.5168-NZ is a heated microscope stage designed for integration with stereo microscopes, providing regulated warming for temperature-sensitive specimens. PID-controlled temperature stability up to 50 °C Integrated design for stereo microscopes Supplied only with new microscopes SKU AE.5168-NZ for straightforward identification Controlled temperature for consistent imaging quality The stage features a PID controller that actively monitors and adjusts heating to maintain a set temperature, ensuring stable conditions throughout prolonged observations. Maintaining a stable sample temperature reduces focal drift and dimensional changes that can compromise high-magnification imaging. The regulated heating, specified to reach 50 °C, is particularly useful when handling materials or biological samples that require a defined thermal environment to prevent condensation, stress-induced distortion or measurement errors. The regulated heat output is described in clear, comparable terms so planners and technicians can assess suitability for their workflows. Engineered for seamless integration with stereo microscopes Designed specifically as a microscope stage for stereo microscopes, the unit is intended to be supplied together with new microscope assemblies rather than as an aftermarket retrofit. This approach guarantees mechanical and electrical compatibility at installation and reduces commissioning time. The compact configuration simplifies alignment and preserves the optical working distance typical for stereo systems. Because the stage arrives pre‑matched to the instrument, commissioning is straightforward and thermal coupling is optimised for reliable performance during routine inspection and precision tasks. Practical advantages for laboratory and production use Beyond temperature control, the stage supports reproducible working conditions that aid process control and quality assurance. By keeping environmental variables more stable, the stage helps to shorten set-up times and minimise rework caused by thermally induced positional changes. The integrated heating is valuable where repeatable imaging or assembly under controlled warmth speeds adhesive curing or reduces brittle behaviour in certain polymers. The engineering focus on stability and compatibility makes this solution appropriate for inspection benches in research, quality control and small-series production environments. Contact Metav Werkzeuge for detailed configuration options or to arrange supply alongside compatible new microscopes — our specialists in Emmerich can advise on integration and order processing. Technical data Article number: AE.5168-NZ SKU: AE.5168-NZ Brand: Euromex Product type: Microscope stage Facts Max. temperature: 50 °C Temperature control: PID regulator Intended for: Stereo microscopes Special features Supplied only with new microscopes Integrated design for direct installation Compact heated stage for stable imaging FAQ Is this stage compatible with older microscopes? The AE.5168-NZ stage is supplied only with new microscopes and is not offered as a separate retrofit for older instruments. What temperature control does the stage provide? The AE.5168-NZ includes a PID-controlled heater with a maximum temperature of 50 °C for precise thermal regulation. How does the PID controller improve imaging results? Using the PID regulator, the AE.5168-NZ maintains set temperatures with minimal overshoot and rapid stabilisation, reducing thermal drift and improving repeatability in measurements and inspections. For which microscope types is the stage intended? The stage is designed specifically for stereo microscopes and is supplied as part of new stereo microscope assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the sapphire-glass surface and the integrated specimen holder to improve sample stability and inspection speed; order the stage directly via Metav Werkzeuge or consult our specialists for technical clarification. DX.9504-R Microscope Stage — Sapphire glass, right-handed specimen holder by Euromex The DX.9504-R is a right-handed microscope stage with sapphire glass, a central aperture and an integrated specimen holder, designed for stable sample positioning during routine microscopy tasks. Sapphire glass stage surface Integrated specimen holder Central aperture (hole) Right-handed configuration Durable surface for long-term precision The sapphire-glass stage surface is chosen for its wear resistance and smooth finish, reducing scratches and maintaining a clear viewing plane over extended use. A hard viewing surface minimises contamination traps and simplifies cleaning routines, which supports consistent optical performance and lowers maintenance effort. The result is a reliable inspection base that preserves alignment and focus stability for longer runs, contributing to process reliability in laboratory and workshop settings. Stable sample handling to speed inspection An integrated specimen holder secures the sample in a predictable position, reducing time spent on repositioning and refocusing. The built-in aperture (hole) allows light transmission where required and keeps the sample accessible for transmitted illumination setups. These mechanical features translate into fewer interruptions in the workflow and more reproducible measurement conditions, which is particularly valuable for repetitive quality-control tasks and documentation procedures. Workflow-friendly design for routine microscopy The right-handed layout is configured for ergonomic operation in standard bench setups, enabling faster manipulation and less handling stress for right-oriented users. The stage is intended for use with microscopes and complements standard microscopy mounts, offering a compact and practical solution for laboratories and technical workshops. The Euromex construction emphasises functional simplicity and longevity, supporting dependable day-to-day inspection and sample preparation. Choose the Euromex DX.9504-R for a robust, low-maintenance microscope stage and contact Metav Werkzeuge in Emmerich for availability and expert purchasing advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.9504-R Manufacturer: Euromex Product type: Microscope stage SKU: DX.9504-R Data Image file size: 94419 Special features Sapphire glass surface Hole / aperture Specimen holder Right-handed orientation FAQ What is the surface material of the stage? The stage uses a sapphire glass surface, providing a hard, smooth viewing plane for long-term use with the DX.9504-R stage from Euromex. Does the stage include a hole for illumination? The stage includes a central aperture (hole) that accommodates transmitted-light arrangements and supports flexible illumination setups. Is this stage suitable for left-handed users? The DX.9504-R is configured in a right-handed layout; left-handed operation would require a differently orientated stage or a left-handed variant. How does the specimen holder affect sample stability? The integrated specimen holder secures the sample position to reduce repositioning and improve reproducibility during inspections with the microscope stage. For which equipment is this stage intended? The stage is intended for use with microscopes and serves as a replacement or upgrade stage for standard laboratory and workshop microscopy applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a sapphire-glass stage for long-lasting clarity and the integrated through‑hole and specimen holder for reliable transmitted-light work; the left‑handed layout supports specialised workflows. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. DX.9504-L Microscope Stage — Sapphire glass, left‑handed configuration (Euromex) The DX.9504-L is a left‑handed microscope stage designed for precise sample positioning, featuring a sapphire-glass surface, a central through‑hole for transmitted illumination and a secure specimen holder. Sapphire-glass stage for scratch resistance and clarity Integrated through‑hole for transmitted-light setups Specimen holder for secure sample fixation Left‑handed layout for specialised workflows Enhanced longevity and clearer imaging for routine use The use of sapphire glass on the stage delivers superior scratch resistance and a consistently smooth surface that preserves optical clarity over time. A wear‑resistant stage reduces the need for frequent replacement and minimises maintenance interruptions in laboratories and teaching environments. This durability translates into dependable image quality and lower lifetime operating costs, supporting uninterrupted inspection and documentation tasks. Reliable transmitted‑light imaging and secure sample handling An integrated through‑hole enables straightforward use with transmitted‑light microscopes, while the dedicated specimen holder keeps samples stable during adjustment and observation. Together these features simplify alignment and reduce repositioning time, increasing throughput for repetitive examinations. The left‑handed configuration adapts to specific bench layouts or operator preferences, making instrument setup more ergonomic in constrained workspaces. Versatile accessory for labs, education and inspection workflows As a compact microscope stage, the unit suits routine laboratory work, educational settings and industrial inspection where secure handling and illumination flexibility are priorities. The model DX.9504-L from Euromex integrates directly with many standard stands and optical arrangements, providing a pragmatic upgrade path for benches that require improved sample control or enhanced transmitted-light capability. For further technical details or compatibility questions, specialist advice is available to ensure the stage meets the planned application and downstream measurement needs. Choose the Euromex DX.9504-L for robust handling and precise transmitted‑light imaging — contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: DX.9504-L SKU: DX.9504-L Manufacturer: Euromex Product type: Microscope stage Facts Gallery file size: 93995 Gallery filename: DX.9504-L.jpg Special features Sapphire glass stage Through‑hole for transmitted light Specimen holder Left‑handed configuration For microscopes FAQ What materials are used for the stage surface? The stage surface is made with sapphire glass, chosen for the DX.9504-L to provide high scratch resistance and durable optical clarity. Can the stage be used with transmitted‑light microscopes? Yes. The integrated through‑hole on the DX.9504-L accommodates transmitted‑light arrangements and facilitates even illumination for transparent samples. How does the specimen holder improve handling? The specimen holder secures samples during adjustment and observation, reducing movement and improving repeatability for inspection routines on the Euromex stage. Is the left‑handed configuration compatible with standard microscope stands? The left‑handed layout is designed to fit most standard stands while providing an ergonomic alternative for specific bench setups; compatibility checks are advised for bespoke systems. Is this stage suitable for educational and industrial use? Yes. The DX.9504-L combines durable materials and practical features that make it appropriate for both teaching environments and light industrial inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 185 x 145 mm working surface combined with a 50 x 50 mm X‑Y cross table to achieve repeatable, fine positional control for sample inspection; order the Euromex stage directly via Metav Werkzeuge or consult our technical team for integration advice. 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 — Euromex microscope stage The 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 is a precision stage designed to improve specimen handling and positional control for stereomicroscope workflows in inspection and laboratory environments. 185 x 145 mm working surface 50 x 50 mm X‑Y cross travel Designed for DZ‑series stereomicroscopes Stable platform for precise positioning Precise positioning for reproducible inspection results The compact work surface paired with an integrated X‑Y cross table delivers controlled, incremental movement that supports accurate sample alignment. The 50 x 50 mm X‑Y cross table refers to the travel range in the horizontal planes, enabling fine adjustments without moving the entire microscope assembly. For quality control or repetitive inspection tasks, this combination reduces setup time and increases measurement repeatability by keeping specimens within the optical field while adjustments are made. The result is a more efficient inspection sequence and fewer re‑setups between samples. Designed for stereomicroscope workflows and easy integration Engineered for use with DZ‑series stereomicroscopes, the stage offers a stable platform that integrates with typical bench setups and inspection benches. Compatibility with the DZ range simplifies selection and reduces the need for adaptors, while the 185 x 145 mm surface provides enough area for common sample holders and fixturing. The construction supports everyday laboratory routines and small production lines where reliable positioning matters; technicians benefit from straightforward alignment and quicker transition from coarse to fine adjustments. Practical handling reduces downtime and improves throughput The stage is built to be straightforward in use: the cross table mechanism allows incremental movement without disturbing the specimen orientation. This practical design shortens manipulation cycles during sorting, assembly checks, or educational demonstrations. For users new to mechanical stages, the term X‑Y cross table simply indicates independent horizontal axes for left‑right and forward‑back movement, permitting controlled navigation across the specimen. The compact footprint helps save bench space while maintaining the precision required for detailed visual inspection. Contact Metav Werkzeuge for ordering, compatibility checks and accessory recommendations for the Euromex DZ.9020 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DZ.9020 SKU: DZ.9020 Product type: microscope stage Manufacturer: Euromex Label: 185 x 145 mm Objekttisch mit 50 x 50 mm X-Y-Kreuztisch für DZ-Serie DZ.9020 Facts Working surface: 185 x 145 mm X‑Y travel: 50 x 50 mm Special features Compatibility: for DZ‑series stereomicroscopes Application: specimen positioning and inspection Compact footprint suitable for inspection benches FAQ What are the exact dimensions and travel range of the stage? The Euromex DZ.9020 offers a 185 x 145 mm working surface with an X‑Y travel of 50 x 50 mm, providing controlled horizontal movement for specimen alignment. Is the stage compatible with other stereomicroscopes? The stage is designed for the DZ‑series stereomicroscopes; compatibility with other models depends on mounting arrangements — the DZ.9020 is optimised for DZ‑series integration. How does the X‑Y cross table improve inspection workflows? An integrated X‑Y cross table enables precise lateral and longitudinal adjustments without relocating the microscope, improving repeatability and reducing handling time during inspections with the DZ.9020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data conflict: the product is listed both as a "microscope cleaning agent" and as a "microscope maintenance and service kit (16-piece set)"; please verify the product information to ensure accuracy, as this discrepancy might lead to confusion for potential buyers or users who rely on precise product descriptions to make informed purchasing decisions, especially when dealing with specialised equipment like microscopes, where the distinction between a cleaning agent and a comprehensive maintenance kit could significantly impact its intended use, functionality, and overall effectiveness in maintaining the instrument's performance and longevity.

Reliable phase contrast imaging and oil‑immersion capability combine to deliver fine structural detail and consistent contrast for demanding laboratory work; the set features PLPHi infinity‑corrected objectives and dedicated phase contrast rings for both 20x and S100x, ensuring reproducible results. Order the IS.9163 directly via Metav Werkzeuge or consult our advisors for configuration support. Euromex IS.9163 – Phase contrast slider set with 20x and S100x oil‑immersion, PLPHi infinity‑corrected objectives IS.9163 is a Euromex phase contrast slider set intended for high‑resolution microscopy, combining oil‑immersion PLPHi optics with phase contrast rings suitable for 20x and S100x applications. Oil‑immersion PLPHi infinity optics Includes phase contrast rings for 20x/S100x Designed for high‑resolution phase contrast Compatible with Euromex IS.9163 setups Delivering increased detail with oil‑immersion PLPHi optics The slider set uses oil‑immersion optics to raise numerical aperture at high magnifications, which improves light gathering and therefore image resolution and contrast for transparent specimens. The PLPHi designation identifies high‑performance plan objectives corrected for flat field reproduction, while infinity‑corrected optics permit the use of intermediate optical components without compromising alignment. For laboratories seeking clearer phase contrast of cellular structures, these characteristics translate into more reliable visualisation and fewer repeat scans, supporting efficient workflows and reduced analysis time. Consistent phase contrast for reproducible imaging Included phase contrast rings are matched to the 20x and S100x objectives to produce the characteristic interference that reveals phase differences in unstained samples. Because the condenser annuli and objective phase plates are specified for the same magnifications, the set enables consistent contrast across sessions, which is particularly valuable for comparative studies and quality control. The arrangement reduces setup variability and supports standardised imaging procedures — a rational advantage for any lab that depends on comparable results day to day. Integration into microscope systems and workflow benefits The components are designed for microscopes that accept infinity‑corrected objectives, allowing the set to be incorporated into existing optical trains where such optics are supported. Compatibility with oil‑immersion technique means improved performance at high magnification, while the matched phase rings simplify switching between contrast modes. For users evaluating system integration, the set offers a practical combination of optical performance and operational efficiency, with fewer adjustments needed to achieve optimal phase contrast images. Practical considerations and expert support For clarification on specific system fit or immersion procedures, the set's design and function are documented to support correct use in laboratory environments. If uncertainty remains about compatibility with a particular microscope stand or condenser, Metav Werkzeuge provides technical advice and can arrange procurement. The emphasis on verified optical matching and the inclusion of phase rings reduce installation time and help maintain a clear, repeatable imaging routine — factors that contribute to dependable daily operation in both research and routine inspection settings. For precision phase contrast imaging, contact Metav Werkzeuge to discuss the Euromex IS.9163 configuration and procurement options — email info@metav-werkzeuge.com or call +49 2822 7131930 to obtain expert advice and secure supply from our Emmerich location. Technical Data Article number: IS.9163 SKU: IS.9163 Product type: Phase contrast set Manufacturer: Euromex Data Magnifications: 20x, S100x oil‑immersion Optical correction: Infinity‑corrected (PLPHi) Special features Oil‑immersion objectives Phase contrast rings for 20x and S100x Designed for high‑resolution phase contrast microscopy FAQ What magnifications are covered by this set? The Euromex IS.9163 set includes components specified for 20x and S100x oil‑immersion magnifications to support high‑magnification phase contrast work. Is the IS.9163 suitable for oil‑immersion techniques? Yes, the IS.9163 is configured for oil‑immersion use with S100x and benefits from PLPHi plan optics optimised for immersion applications. Will the phase contrast rings fit my condenser? The phase contrast rings supplied with IS.9163 are matched to the 20x and S100x objectives; compatibility depends on the condenser design and whether the microscope accepts matched annuli for those magnifications. What performance advantages do infinity‑corrected PLPHi objectives provide? Infinity‑corrected PLPHi objectives in this set offer improved field flatness and allow integration of intermediate optical components without loss of alignment, supporting consistent phase contrast imaging. Which applications is this set intended for? The set is intended for high‑resolution phase contrast microscopy where enhanced contrast of unstained, transparent specimens is required, such as cell observation and quality inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise GFP imaging, flexible emission options and a 23.2 mm phototube for straightforward camera integration; combine reliable optical performance with simple system compatibility. Order the filter directly via Metav Werkzeuge or ask our consultants if further clarification is required. Microscope filter DZ.9050 — Fluorescence set for blue excitation, 23.2 mm phototube The Microscope filter DZ.9050 is a fluorescence filter set designed for blue-range excitation and GFP applications, supplied with a 23.2 mm phototube adapter for direct integration into standard camera ports. Dual filter sets for GFP imaging Excitation range EX460–500 nm Includes 23.2 mm phototube adapter Bandpass and longpass emission options Optimised signal separation for reliable GFP detection The set provides EX460–500 excitation and a DM505 dichroic, combined with an EM510–560 bandpass for narrow emission capture. This arrangement improves signal-to-noise ratio by admitting the desired fluorescence while suppressing out-of-band light, which is beneficial for quantitative imaging and documentation. Explained simply, the bandpass option is ideal when spectral selectivity is required to reduce background, enabling clearer contrast in samples labelled with GFP or similar blue-excited fluorophores. Two emission strategies for adaptable workflows Delivered with both a GFP BP (bandpass) and a GFP LP (longpass) filter set, the kit supports different imaging approaches without major reconfiguration. The bandpass set captures a defined emission window for high-contrast imaging, while the longpass version allows broader emission capture when maximum signal is the priority. This flexibility reduces filter changes and workflow interruptions, so laboratories can switch between diagnostic clarity and maximum sensitivity according to the task. Easy mechanical and optical integration into existing systems Supplied for use with a 23.2 mm phototube, the set fits standard camera ports and intermediate tubes, simplifying mechanical coupling to trinocular microscopes and camera adapters. Compatibility with common phototube sizes minimises the need for additional adapters, supporting a faster setup for imaging or photodocumentation. Manufactured to professional standards, the filters offer stable spectral performance for consistent results across repeated measurements and routine laboratory use. For assistance assessing compatibility with a specific microscope or camera, and to secure the Euromex DZ.9050 through Metav Werkzeuge, please contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering options. Technical Data Article number: DZ.9050 SKU: DZ.9050 Product type: Microscope filter Brand: Euromex Core specifications Excitation: 460–500 nm Dichroic mirror: 505 nm Emission (bandpass): 510–560 nm Emission (longpass): 510 nm Phototube diameter: 23.2 mm Features Two filter sets for blue excitation (GFP BP and GFP LP) GFP BP bandpass configuration GFP LP longpass configuration Designed for fluorescence microscopy Supplied with 23.2 mm phototube adapter FAQ What excitation and emission ranges does the filter set cover? The set covers excitation EX460–500 nm, a dichroic at DM505 nm, and emission options of EM510–560 nm (bandpass) and EM510 nm (longpass) for targeted fluorescence imaging. Is this set suitable for imaging GFP-labelled samples? Yes, the Euromex microscope filter DZ.9050 (SKU DZ.9050) is specifically configured for GFP and similar blue-excited fluorophores with dedicated bandpass and longpass emission options. How is the filter set mounted in a microscope? The kit is supplied for use with a 23.2 mm phototube, allowing direct installation into standard camera tubes or intermediate phototube ports without bespoke modification. Are both filter types included in the delivery? Both the GFP bandpass and longpass filter sets are included, providing immediate flexibility for contrast-focused or high-sensitivity imaging tasks. Can the filter set be used with a camera for photodocumentation? Yes, when the microscope offers a 23.2 mm phototube or compatible camera port, the set is suitable for integration into the phototube optical path for camera-based imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A standard 23.2 mm tube for 31 mm photo port provides precise optical alignment and broad compatibility with Oxion upright (Revision 2) and Oxion Inverso inverted microscopes, supporting consistent image capture across systems; order the AE.5120-2 via Metav Werkzeuge or consult the Metav team for integration advice. Standard tube 23.2 mm for 31 mm photo port — Microscope camera adapter AE.5120-2 by Euromex A standard tube 23.2 mm for 31 mm photo port AE.5120-2 is designed as a camera interface for Oxion upright (Revision 2) microscopes and for Oxion Inverso inverted models, enabling straightforward attachment of imaging equipment in laboratory and industrial settings Standard 23.2 mm eyepiece tube Fits 31 mm photo port diameter Compatible with Oxion upright Rev 2 Adapter for Oxion Inverso inverted microscopes Accurate optical coupling for dependable images The 23.2 mm standard tube establishes a stable optical path between the microscope and a camera via the 31 mm photo port, reducing the need for repeated realignment. As a purpose-made microscope camera adapter, it preserves the optical axis and ensures consistent focal positioning when switching between eyepieces and imaging devices. This stability translates into fewer retakes during documentation and faster completion of imaging tasks without speculative adjustments. Designed for seamless integration with Oxion systems Compatibility with Oxion upright microscopes (Revision 2) and all Oxion Inverso inverted microscopes simplifies system planning and stock management. The adapter’s form factor matches the photo port specification precisely, which means existing camera mounts and C‑mount accessories designed around a 31 mm port can be used reliably. For laboratories that run multiple Oxion platforms, this reduces adapter variety and streamlines imaging workflows across instruments. Workflow advantages that save time By providing a standardised mechanical interface, the adapter minimises installation downtime and supports repeatable imaging procedures. The compact adapter reduces the risk of vignetting or misalignment when coupling digital sensors, which is particularly relevant for contrast techniques such as darkfield microscopy. Where documentation throughput matters, the adapter’s predictable performance contributes to smoother sample processing and more efficient capture routines. Suitable for microscopy applications requiring reproducibility In applications where consistent image quality and traceable documentation are required, the AE.5120-2 functions as a reliable accessory for both routine inspections and more demanding imaging tasks. The provision of a standard tube that conforms to established port dimensions helps maintain calibration across sessions and equipment swaps, supporting quality assurance in research, teaching and industrial inspection environments. For compatibility checks or to secure the AE.5120-2 adapter for Oxion microscopes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order handling Technical data SKU: AE.5120-2 Manufacturer article number: AE.5120-2 Product type: Microscope camera adapter Brand: Euromex Facts Tube diameter: 23.2 mm Photo port diameter: 31 mm Special features Compatible with Oxion upright microscopes (Revision 2) Compatible with Oxion Inverso inverted microscopes Category: Darkfield microscopy accessory Image: AE.5120-2.jpg (gallery available) FAQ What does the 23.2 mm tube designation mean for image capture? The 23.2 mm figure denotes the standard eyepiece tube diameter; the AE.5120-2 adapts this standard to the 31 mm photo port, ensuring correct optical alignment for camera attachment. Will this adapter fit any Oxion model? The adapter is specified for Oxion upright microscopes (Revision 2) and for Oxion Inverso inverted microscopes; compatibility with other Oxion revisions should be verified against port dimensions. Can the AE.5120-2 be used for darkfield imaging setups? Yes, the adapter supports configurations used in darkfield microscopy by maintaining the required optical axis and connection to cameras intended for a 31 mm photo port. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Achieve clear, reproducible contrast for cell nuclei and cellulose walls with a compact laboratory dose; combine with Astra Blue for precise two-colour preparations. Rely on consistent supply and technical guidance from Metav Werkzeuge when specifying this reagent for routine or teaching microscopy. Safranin PB.5295 — Microscope stain for cell nuclei and cellulose walls (Euromex) Safranin PB.5295 is a laboratory-grade microscope stain designed to highlight cell nuclei and cellulose walls in botanical and histological preparations. Precise staining of cell nuclei Contrasts cellulose walls effectively Compatible with Astra Blue Compact 25 ml laboratory bottle Sharper cellular contrast for dependable observation The safranin formulation provides a distinct red counterstain that binds to cell nuclei and to polysaccharide-rich cellulose walls, producing a reliable visual separation from other tissue components. When used as a counterstain, the dye enhances morphological detail under brightfield microscopes and basic imaging setups; this contrast simplifies identification of nuclear structures and cell wall boundaries, which is particularly useful for routine diagnostics, teaching slides and comparative botanical studies. The product’s purpose is clarity and repeatability rather than procedural complexity. Seamless integration into standard two‑colour staining workflows Designed for paired use with Astra Blue, the dye enables a complementary two‑colour technique: the blue tint of Astra Blue and the red tone of safranin produce high-contrast, easily interpretable preparations. This combination aids visual differentiation of lignified versus non-lignified tissues and supports faster evaluation of sample architecture. Supplied as a compact 25 ml reagent, the format is suited to laboratories and teaching environments that require controlled volumes with minimal waste, while allowing straightforward incorporation into existing staining protocols without additional specialised reagents. Practical handling, laboratory reliability and quality assurance The bottle format and composition support efficient bench work and consistent dosing in repetitive staining routines. As a microscope stain from a recognised supplier, this reagent aligns with common laboratory practices for preparation and disposal; users are advised to follow in-house safety rules and supplier instructions for handling. Sourcing via an established distributor ensures traceability and dependable logistics for ongoing laboratory needs, reducing downtime and maintaining continuity in staining supplies for educational and routine microscopy applications. For reliable two‑colour counterstaining and assured supply, order the Euromex Safranin PB.5295 through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for product availability and technical advice Technical Data Article number: PB.5295 SKU: PB.5295 Product type: Microscope stain Content: 25 ml Manufacturer: Euromex Specifications Capacity: 25 ml Special features Stains cell nuclei and cellulose walls Intended for use with Astra Blue Application: preparation (microscopy) FAQ What structures does this stain highlight most effectively? Safranin PB.5295 primarily highlights cell nuclei and cellulose walls, delivering strong red contrast that improves visibility of nuclear and cell wall detail in standard microscopy preparations. Can this stain be used together with Astra Blue? Yes. The product is intended for combined use with Astra Blue to create a two‑colour preparation in which safranin produces red contrast against the blue background, aiding tissue differentiation. Is the volume suitable for teaching and routine lab work? The 25 ml supply of Safranin PB.5295 is suitable for routine staining and teaching sessions, offering a compact quantity that limits waste while covering repeated preparations. Does Safranin PB.5295 require special equipment for observation? No specialised equipment is required; stained slides are readily examined with standard brightfield microscopes and basic imaging systems commonly found in teaching and diagnostic laboratories. How should stained waste and remnants be handled? Follow local laboratory safety procedures and institutional disposal guidelines when handling residues from Safranin PB.5295; consult the supplier’s safety information for recommended precautions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a dedicated third-colour option for Azo staining, supplied in a convenient 25 ml bottle and produced by Euromex for consistent laboratory results; the combination of targeted colour contrast and reliable batch quality supports dependable routine staining. Order the Aniline Blue PB.5300 directly via Metav Werkzeuge or consult the technical advisers for protocol compatibility. Aniline Blue as third colour for Azo staining PB.5300 — Microscope stain, Euromex A reliable laboratory reagent: Aniline Blue as third colour for Azo staining PB.5300 designed for histological and cytological staining workflows Third colour for Azo staining Compatible with standard staining protocols 25 ml bottle for routine laboratory use Euromex quality control Consistent contrast for routine Azo workflows The Azo staining series gains enhanced differentiation with the addition of Aniline Blue, which provides a distinct contrast as a third dye. Supplied in a 25 ml format, the reagent is intended for repeated use in standard histology preparations and established Azo protocols. The formulation is designed to deliver reproducible staining across batches, reducing variability between runs and supporting reliable microscopic evaluation. By clarifying the role of this dye within the staining sequence, laboratories benefit from improved tissue distinction and simplified colour interpretation during microscopic analysis. Practical integration with existing staining protocols Formulated for compatibility with common laboratory workflows, the dye integrates into standard Azo procedures without the need for specialised equipment. The product is suitable for use alongside routine fixatives and mounting media, enabling straightforward implementation into current processes. The technical composition supports predictable uptake and washout behaviour, which simplifies process validation and documentation. Laboratories seeking efficient throughput will value the reagent’s balance of ease of use and dependable performance, helping to maintain consistent slide quality across repeated preparations. Quality assurance and traceability for laboratory environments Produced under Euromex quality standards, the reagent comes with clear batch identification for traceability and record-keeping. The combination of controlled production and compact packaging makes the dye suitable for both bench-top laboratories and teaching facilities that require dependable consumables. The presence of a third, complementary dye in the Azo series can improve diagnostic clarity and teaching demonstrations alike, contributing to more effective interpretation under the microscope and a reduced need for repeat staining. Contact Metav Werkzeuge today to order the Aniline Blue PB.5300 or to discuss protocol compatibility and delivery from Emmerich Technical Data Article number: PB.5300 SKU: PB.5300 Brand: Euromex Product type: Microscope stain Content: 25 ml Facts Intended use: Azo staining (third dye) Packaging: 25 ml bottle Lab application: Histology, cytology Special features Distinct third-colour contrast Batch identification for traceability Suitable for standard staining protocols FAQ What is the primary application of this dye? The dye is intended as a third colour for Azo staining and supports improved contrast in histological and cytological preparations when used according to standard protocols. Is the reagent ready to use or does it require dilution? The reagent is supplied for routine laboratory use; specific dilution requirements depend on the adopted Azo protocol and should be validated during method setup. Can the dye be used with other staining sequences? Yes, the formulation is compatible with many established workflows; however, integration into non-Azo sequences should be confirmed through trial staining and documentation. How is batch traceability handled for this product? Each batch is produced under Euromex quality control and is identifiable via the article number PB.5300 for documentation and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, laboratory-grade dye that enhances contrast in botanical preparations and integrates smoothly into established staining workflows; order the Euromex product directly via Metav Werkzeuge or consult the Metav team for application advice. Astrablue for plant cells PB.5289 — Euromex microscope stain, 25 ml vial The Astrablue for plant cells PB.5289 is a microscope stain formulated to emphasise plant cell structures and intended for combined use with safranin in routine botanical preparations. Euromex microscope stain for plant cells Ready-to-use 25 ml vial Developed for combination with safranin SKU PB.5289 for clear identification Strong contrast for botanical preparations The stain provides a consistent contrast that makes delicate plant cell structures easier to distinguish under brightfield microscopy. When applied as part of a double-staining routine, the dye works in concert with safranin to separate tissue components visually; one dye highlights cellulosic elements while the other provides complementary counterstaining, improving overall specimen legibility. This approach reduces misinterpretation and speeds up routine analysis in classrooms and basic laboratory workflows. Compact packaging geared to routine use Supplied in a 25 ml vial, the reagent is sized for laboratories and teaching facilities that require frequent small-batch preparations. The compact volume supports economical use and limits waste without compromising availability for recurring protocols. As an Euromex microscope stain, the product adheres to expectations for reproducible performance, allowing technicians and instructors to rely on consistent staining behaviour across multiple sessions. Integrates into standard microscopy workflows Designed as a consumable for microscopy preparation, the dye is compatible with established staining sequences and mounting media commonly used in botanical microscopy. The reagent is suitable for routine slides where enhanced visual differentiation is required; it can be incorporated into educational practicals, specimen documentation and basic research tasks. Clear labelling with PB.5289 assists inventory control and ensures traceability in supply chains that prioritise reproducibility. Contact Metav Werkzeuge to obtain Euromex Astrablue for plant cells PB.5289 and receive concise guidance on integrating the stain into existing protocols: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: PB.5289 SKU: PB.5289 Manufacturer: Euromex Content: 25 ml Product type: Microscope stain Facts Content / Capacity: 25 ml Special features For plant cells Use in combination with safranin FAQ What is this stain intended for? The Astrablue for plant cells PB.5289 is a microscope stain intended to enhance visual contrast in botanical specimens, especially when used alongside safranin. How much reagent is supplied per unit? Each bottle contains 25 ml of the Euromex microscope stain, suitable for routine slide preparations. Can this dye be used with safranin? Yes, the product is specified for use in combination with safranin to produce complementary staining effects. Which brand and SKU identify this product? The stain is supplied by Euromex and listed under SKU PB.5289 as a microscope stain for plant cell preparations. Where is this reagent typically used? The dye is suitable for laboratory and teaching environments where botanical slide contrast and reproducibility are required. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data conflict: Manufacturer "Euromex" is not listed in the provided manufacturer overview, which creates an issue as it prevents the system from being able to generate the required product description accurately; this could be due to an incomplete database, a missing entry, or an oversight in the provided information, and it is recommended to verify the manufacturer details or update the overview to ensure all relevant manufacturers are included, as this will enable the generation of a comprehensive and accurate product description without any further complications or errors arising from missing data.

Reliable overview contrast in a compact laboratory format supports steady throughput and predictable results; the 25 ml presentation and consistent formulation make inventory simple and staining reproducible. Order the stain directly via Metav Werkzeuge or consult their technical team for application advice. Eosin (yellowish) PB.5283 — 25 ml overview stain by Euromex Eosin (yellowish) PB.5283 is a microscope stain formulated for general overview staining in routine sample preparation and education settings Yellowish eosin for overview staining 25 ml laboratory bottle Suitable for routine microscopy preparations Improved sample contrast for routine workflows The product offers dependable overview staining to enhance contrast between cellular components during light microscopy. As an acidic dye, the preparation selectively imparts a pink to yellowish tint to cytoplasmic and extracellular structures, which simplifies the initial assessment of slides and accelerates decision-making in routine workflows. This clarity reduces retakes and supports faster sample throughput, a practical advantage in teaching labs and high-volume preparation rooms. Compact format for efficient stock management Supplied in a 25 ml bottle, the stain is convenient for bench-top use and regular replenishment cycles. The small format minimises storage footprint while ensuring sufficient supply for standard staining runs. Consistent formulation supports reproducible results across batches, helping to maintain quality standards without complex handling. The product is therefore suited to laboratories that value predictable performance and straightforward inventory control. Practical guidance and safe laboratory practice The stain is intended for routine microscopy preparation and must be handled according to standard laboratory safety procedures; consult the relevant safety data sheet before use. For any uncertainties regarding application or compatibility with specific staining protocols, Metav Werkzeuge’s specialists can provide technical guidance and help integrate the dye into established workflows. The combination of clear visual contrast and practical supply sizing supports both educational settings and professional labs seeking reliable consumables. For supply and technical questions about Euromex Eosin (yellowish) PB.5283, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and procurement support. Technical data Article number: PB.5283 SKU: PB.5283 Brand: Euromex Product type: Microscope stain Facts Content / Capacity: 25 ml Special features Yellowish eosin dye For overview staining Category: Preparation (microscopy consumable) FAQ What is the primary use of this stain? The Euromex Eosin (yellowish) PB.5283 is intended for overview staining to enhance contrast in routine light microscopy preparations. Is the 25 ml format suitable for teaching laboratories? Yes, the 25 ml bottle of PB.5283 provides a compact supply that suits teaching labs and smaller preparation batches without excessive storage needs. Can this eosin preparation be combined with other routine stains? PB.5283 is designed as an overview dye and can be used alongside standard contrast protocols; compatibility with specific workflows should be confirmed against the laboratory’s staining routine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise fuchsin formulation for reliable bacilli contrast in tissue and a compact 25 ml volume that fits routine laboratory workflows; order directly via Metav Werkzeuge or consult our specialists for protocol advice. Fuchsin for staining bacilli in tissue PB.5305 — microscopy dye with clear contrast, 25 ml, Euromex Fuchsin for staining bacilli in tissue PB.5305 is a microscopy dye formulated for the selective colouring of bacilli within histological sections, suitable for integration into standard laboratory staining routines. Specific bacilli stain for tissue sections 25 ml reagent volume for routine use Compatible with standard microscopy protocols High-contrast staining for clear visualisation Reliable contrast that supports consistent evaluation The fuchsin formulation delivers a dependable staining result for bacilli embedded in tissue, producing a distinctive colour contrast that assists microscopic discrimination of target organisms from surrounding structures. As a dedicated microscopy dye, the reagent is designed for routine preparative workflows and supports reproducibility across repeated runs. The clear chromatic separation reduces interpretation time and helps technicians maintain consistent results under standard bright-field examination. Compact format for efficient laboratory operation Presented in a 25 ml volume, the reagent offers a space-saving solution for laboratories that require a reliable supply without excessive storage needs. The modest capacity aligns with periodic use in diagnostic or teaching settings, limiting reagent waste while ensuring availability for scheduled staining batches. Lab managers benefit from straightforward stock management and compatibility with common histology consumables, which streamlines procurement and reduces interruption to daily routines. Straightforward integration into established protocols The dye is intended for use within established histological procedures and is compatible with typical staining sequences employed in tissue-based microbiology. Technical staff will find the reagent straightforward to incorporate into existing protocols, enabling rapid validation and consistent outcomes. For laboratories seeking to align procurement with a trusted European channel, Metav Werkzeuge combines broad product availability with logistical reliability and a long-standing reputation for supplying precision tools and consumables. For dependable staining results with Euromex PB.5305, contact Metav Werkzeuge to arrange supply and discuss protocol compatibility—Metav Werkzeuge in Emmerich can provide technical guidance by e‑mail or phone. Technical data Article number: PB.5305 SKU: PB.5305 Brand: Euromex Product type: microscopy dye Core specifications Capacity: 25 ml Special features For staining bacilli in tissue Consumable for microscopy preparation Intended for routine laboratory application FAQ What is the primary application of this reagent? The Euromex Fuchsin for staining bacilli in tissue PB.5305 is intended to colour bacilli within histological sections to aid microscopic examination. How much reagent is supplied per unit? Each unit contains 25 ml of the microscopy dye suitable for routine staining tasks. Which protocols are this dye compatible with? The reagent integrates with standard histological and microscopy staining protocols commonly used for tissue-based bacterial visualisation. What visual effect can be expected after staining? The dye provides high-contrast colouring of bacilli against tissue background, facilitating clearer observation under bright-field microscopy. Where can more technical details be obtained? Detailed procedural guidance and additional technical specifications for Euromex PB.5305 can be requested from Metav Werkzeuge or found in product literature on the supplier’s technical pages. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Combining reliable staining performance, compact 25 ml format and clear product traceability, this Euromex reagent streamlines routine microscopy and bacteriological preparations; order the product directly via Metav Werkzeuge or ask our consultants if needed. Methylene Blue for biological and bacteriological staining PB.5297 — 25 ml microscope dye by Euromex Methylene Blue for biological and bacteriological staining PB.5297 is a microscope dye designed for visual contrast in biological and bacteriological preparations, suitable for laboratory and teaching environments Methylene blue for biological staining Suitable for bacteriological preparations Microscope dye, laboratory use 25 ml bottle, SKU PB.5297 Improved contrast for routine microscopy This reagent provides straightforward contrast enhancement for a wide range of microscopic examinations. As a microscope dye, it supports visual differentiation of cellular structures in routine preparations, helping to make otherwise faint details more apparent under transmitted light. The compact 25 ml format minimises storage footprint and suits laboratories or classrooms with modest reagent consumption. For technicians seeking consistent visualisation, the stain offers a practical, traceable option that integrates into existing sample‑preparation workflows without changing core procedures. Practical advantages during sample preparation Incorporating this methylene blue solution into standard staining protocols can reduce preparation time and simplify handling. The product is intended for biological and bacteriological staining, so it aligns with common laboratory tasks such as slide contrast staining and rapid evaluations. The clear labelling and manufacturer code allow for straightforward inventory management and batch control. Where documentation and repeatability matter, the reagent supports reproducible outcomes and easier record keeping in both educational and professional settings. Safe handling and laboratory guidance Treat the reagent as a laboratory chemical and store it according to institutional safety rules and local regulations. Appropriate containment, basic personal protective equipment and correct disposal of used solutions ensure responsible use. For method-specific recommendations—such as dilution, contact time and compatibility with staining sequences—consult institutional protocols or the supplier documentation; further technical details can be provided by the distributor or the manufacturer to match specific laboratory standards. Dependable sourcing and supply assurance Sourcing reagents from a reliable partner reduces uncertainty in everyday laboratory work. Metav combines decades of experience and a broad product range to support industry, trade and retail customers; their distribution from Emmerich ensures a consistent supply and a quality filter for the European market. For laboratories that value predictable delivery and product traceability, the combination of a recognised brand and steady logistics contributes to fewer interruptions and better planning for routine analyses. Contact Metav Werkzeuge for technical advice and to secure Euromex Methylene Blue PB.5297 for delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PB.5297 SKU: PB.5297 Content: 25 ml Product type: Microscope dye Label: Methylene blue for biological and bacteriological staining PB.5297 Facts Capacity: 25 ml Special features Intended use: biological and bacteriological staining Manufacturer: Euromex Application area: microscopy preparations FAQ What is this reagent used for? This dye is used for biological and bacteriological staining; the Euromex Methylene Blue PB.5297 is intended to provide contrast in microscopic preparations. How much product is supplied in one unit? The product is supplied as a 25 ml bottle; the capacity is 25 ml and the SKU is PB.5297. Is the solution suitable for routine laboratory microscopy? Yes, the microscope dye is formulated for routine biological and bacteriological preparations and is suitable for teaching and diagnostic workflows. Where can further technical details be obtained? Further specifications and handling recommendations are available from Metav Werkzeuge or the manufacturer; reference Euromex PB.5297 when requesting additional technical data. Can this stain be integrated into existing slide‑preparation protocols? The reagent is intended for standard staining work; laboratories typically adapt contact times and rinsing steps to their established protocols when integrating the stain. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a vivid Orange G stain that highlights elemental structures in animal tissues and comes in a compact 25 ml supply for dependable routine use; its clear specification supports reproducible preparations. Order the Orange G for elemental structures of animal tissues PB.5292 directly via Metav Werkzeuge or ask our consultants if needed. Orange G for elemental structures of animal tissues PB.5292 — Euromex microscope stain with focused tissue contrast The Orange G for elemental structures of animal tissues PB.5292 is a microscope stain designed to deliver clear orange contrast on structural components within animal tissue preparations. Vivid orange contrast for tissue elements Compact 25 ml volume for routine workflows Suitable for preparation and histological applications Precise contrast for clearer microscopic interpretation The dye provides a distinct orange contrast that emphasises elemental structures in animal tissue sections, supporting reliable visual differentiation during microscopic assessment. Emphasising structural contrast reduces ambiguity in routine preparations and aids reproducible documentation. By specifying the intended application as a stain for animal tissue elements, the formulation supports consistent sample evaluation and streamlined lab workflows. Practical format that fits laboratory routines Delivered in a 25 ml container, the product is sized for regular laboratory use where modest volumes are sufficient and storage space is limited. The small format is practical for histology benches and teaching labs, while the defined content simplifies inventory control. Clear labelling of the stain and its capacity supports traceability and stock management without unnecessary bulk. Handling and application guidance for dependable results The stain is intended for microscopic preparations of animal tissues and should be integrated into established staining protocols that specify exposure times and counterstains as required. For users with limited experience in staining terminology, the term microscope stain refers to a solution applied to sections on slides to enhance optical contrast between cellular or extracellular components during light microscopy. Professional supply and reassurance from Metav Sourcing the dye through an experienced distributor ensures consistent availability and a quality filter for the European market. Metav stands for the democratisation of precision, combining decades of expertise with a broad product range to support industry and craft. This partnership offers transparent order handling from Emmerich and a reliable supply chain for routine laboratory needs. For specialist advice on Euromex Orange G PB.5292 and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for tailored guidance and fast fulfilment. Technical Data Article number: PB.5292 Manufacturer: Euromex Content: 25 ml Product type: Microscope stain SKU: PB.5292 Data Capacity: 25 ml Special features Orange G dye for elemental structures of animal tissues Intended application: preparation / microscopy consumable Label: Orange G for elemental structures of animal tissues PB.5292 FAQ What is the primary application of this stain? The Orange G for elemental structures of animal tissues PB.5292 is formulated for colouring elemental structures in animal tissue preparations for light microscopy. How much product is supplied per unit? Each unit of Orange G PB.5292 contains 25 ml of stain. Is this suitable for routine histology work? Yes, the product is described as a microscope stain intended for preparation tasks and routine microscopy applications. Can the stain be used with other common histological dyes? This stain is compatible with established staining workflows; selection of counterstains and protocol adjustments should follow laboratory practice and validation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Enhance polarisation contrast and streamline integration with a compact Ø 25 mm slider that fits standard nosepieces; benefit from precise visualisation of birefringent structures and quick installation in teaching and routine laboratory microscopes. Order the polarisation filter directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.9602 Polarisation filter by Euromex — Ø 25 mm slider, fits nosepiece The BioBlue.Lab BB.9602 is a polarisation filter designed to improve contrast in microscopy applications, supplied as a Ø 25 mm slider that fits standard nosepieces for easy insertion and reliable alignment. Ø 25 mm slider format Compatible with standard nosepieces Optimises polarisation contrast Sharper contrast for birefringent samples The filter provides targeted contrast improvement by selectively polarising light, which makes birefringence and internal stress patterns in crystalline or fibrous materials more visible. Where unpolarised illumination masks subtle optical anisotropy, a polarisation filter restores definition, enabling clearer distinction between features in thin sections, polymers or mineral slices. This results in faster visual assessment and fewer follow-up measurements, improving throughput in routine inspections and classroom demonstrations. The optical effect is immediate and interpretable even for operators with basic microscopy experience, reducing the need for complex image processing. Fast mounting and broad compatibility with standard setups Supplied as a slider in Ø 25 mm format, the accessory is intended for insertion into a compatible nosepiece and for use alongside a matching analyser in the optical train. The slider design enables quick swapping between contrast methods without readjusting the condenser or objective alignment, so microscope downtime is minimised. Compatibility with nosepiece-mounted slider holders ensures the component integrates with many education and life‑science microscope stands; the compact format also suits multi‑user environments where rapid changeover is required. This practical mounting concept contributes to efficient workflows and predictable results in busy laboratories. Reliable option for teaching and routine laboratory use Manufactured by Euromex, the product is conceived for repeated handling and straightforward operation, making it suitable for education, QC benches and basic research where polarisation contrast is regularly needed. The compact slider dimension supports storage and transport within a standard accessory kit, while the straightforward optical function keeps training time to a minimum. If uncertainty remains about compatibility with a specific microscope model or a particular application, technical advice and specification support are available to help select the correct contrast components for a given setup. The result is a pragmatic balance of optical benefit and operational simplicity. For tailored application advice or to secure supply of the Euromex BioBlue.Lab BB.9602 polarisation filter, contact Metav Werkzeuge for consultancy and purchase support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: BB.9602 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter SKU: BB.9602 Measurements / core data Diameter: Ø 25 mm Mounting: slider format Fits: nosepiece Special features Analyser in slider Fits in nosepiece Intended for polarisation contrast Source: Education PDF S. 14–16; Life Science PDF S. 11–12 FAQ What is the main function of this polarisation filter? The BioBlue.Lab BB.9602 polarisation filter enhances contrast by polarising illumination, making birefringence and anisotropic structures easier to observe in routine microscopy. Will the filter fit my microscope? The BB.9602 is supplied as a Ø 25 mm slider and fits microscopes that accept 25 mm slider inserts in the nosepiece; compatibility should be checked against the stand's accessory holder dimensions. How is the filter installed? Installation is by insertion of the slider into the microscope's nosepiece or designated slider holder; the design allows quick changes between contrast methods without additional alignment. Which samples benefit most from polarisation with this accessory? Mineral thin sections, crystalline materials, fibrous polymers and specimens showing stress patterns typically show marked improvement in visibility when viewed with the BB.9602 polarisation filter. Can this filter be used in teaching environments? Yes, the compact slider format and straightforward optical effect make the BioBlue.Lab BB.9602 suitable for classrooms and instructional labs where rapid demonstration of polarisation phenomena is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com