Take advantage of the combination of precise 0.33x projection, industry-standard C‑Mount compatibility and compact optical design for reliable camera integration. Order the component directly via Metav Werkzeuge or consult the Metav specialists for application-specific advice. Euromex DC.1326 Projection Lens 0.33x — C‑Mount microscope camera adapter The DC.1326 is a projection lens with C‑Mount interface, designed to adapt microscope imaging to camera systems for wider field capture and low‑magnification projection. 0.33x projection magnification for camera coupling C‑Mount compatibility for industry-standard cameras Compact optical design for precise alignment Euromex optical engineering and consistency Wider usable field for camera imaging The 0.33x projection factor reduces the effective microscope magnification presented to the camera sensor, enabling a larger field of view without modifying the primary objective. This is particularly useful when a broader scene is required for documentation, inspection or teaching applications. The projection lens is optimised for coupling with standard C‑Mount cameras, so the optical path length and image circle are matched to common sensor formats, which helps to maintain image geometry and minimise vignetting. The result is a practical balance between image size and retained detail, explained in simple terms for integration into existing imaging chains. Straightforward integration into imaging setups As a microscope camera adapter, the component simplifies mechanical and optical connection between microscope and camera. The C‑Mount interface assures compatibility with a wide range of industrial and laboratory cameras, reducing adapter requirements and installation time. Mechanical alignment is supported by the lens design, which facilitates consistent optical alignment and repeatable positioning during routine use. For engineers and technicians, this means fewer adjustments at the bench and a faster route from setup to measurement or documentation. Application examples and benefits in practice This projection lens is suited to microscopy tasks where a broad overview is required alongside sufficient detail for analysis: classroom demonstrations, quality control documentation, and low‑magnification inspection tasks in production. By adapting the image to the camera sensor through a fixed 0.33x reduction, the adapter helps convert a high‑magnification optical train into a usable camera image without the need for complex relay optics. The approach reduces the number of optical elements needed, which can improve light throughput and ease of use in everyday workflows. Build quality and expected handling advantages Euromex designs emphasise stable optical performance and manufacturing consistency; the lens assembly is intended to deliver repeatable results in laboratory and production environments. The simple mechanical interface and standardised C‑Mount thread mean that the projection lens can be swapped or upgraded within existing imaging setups with minimal disruption. Routine handling is kept straightforward, with the optical purpose—projection to camera sensor—being clear and immediate, supporting efficient processes in documentation and inspection. Secure precise camera integration with Euromex optics — contact Metav Werkzeuge for specification advice and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DC.1326 SKU: DC.1326 Brand: Euromex Core specifications Magnification: 0.33x Features Interface: C‑Mount Product type: microscope camera adapter Function: Projection lens for camera mounting FAQ Is the lens compatible with standard C‑Mount cameras? The DC.1326 is designed for a C‑Mount interface and is compatible with industry‑standard C‑Mount cameras for straightforward mechanical and optical connection. What does the 0.33x magnification mean for image capture? A 0.33x projection factor reduces the microscope image presented to the camera sensor, increasing the visible field of view while keeping detail sufficient for overview documentation and inspection. Can the projection lens be used with different microscope objectives? The projection lens adapts the output image regardless of the objective in use; the resulting image size on the sensor will depend on the combination of the objective magnification and the 0.33x projection factor. Does the adapter affect image quality or light transmission? The projection lens is intended to minimise additional optical elements; while any extra lens can influence transmission, the DC.1326 is designed to preserve usable light levels and image geometry for standard camera sensors. Is the product suitable for industrial documentation and teaching environments? Yes, the projection lens supports broader field capture and is therefore well suited to documentation tasks, educational demonstrations and low‑magnification inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise image capture and reliable compatibility: the adapter delivers a 0.5× optical reduction for a wider field of view and a secure connection to 1/2-inch cameras with a C‑ring. Order the adapter directly via Metav Werkzeuge or contact their consultants for integration guidance. Euromex OX.9850 photo adapter — 0.5× lens, C‑ring for 1/2‑inch cameras A Euromex OX.9850 photo adapter for Oxion inverse microscopes that reduces the image by 0.5× and enables attachment of 1/2‑inch cameras using a C‑ring 0.5× optical reduction for a wider field of view Suitable for Oxion inverse microscopes Revision 2 Connects 1/2-inch cameras with C-ring C-mount category for easy integration Capture a broader working area with reduced magnification The adapter offers a 0.5× reduction that expands the field of view on 1/2‑inch sensors, making it simpler to document larger samples without changing the objective. By lowering the effective magnification, the unit helps to prevent vignetting on smaller camera sensors and ensures the whole inspection area is recorded in a single frame. This improves throughput in routine imaging tasks by reducing the need for stitching or multiple exposures, while maintaining clear optical performance. Seamless compatibility with Oxion inverse microscopes and camera mounts Designed for direct use with Oxion (Revision 2) and Oxion Inverso inverse microscopes, the adapter bridges the optical path between the microscope and a 1/2‑inch camera equipped with a C‑ring. The choice of a C‑ring coupling provides a precise mechanical interface that avoids play and misalignment during repeated mounting. For systems listed under the C‑Mount category, integration is straightforward, enabling reliable image transfer for documentation, teaching or quality control processes. Practical mounting and what to expect in daily use The unit is a compact photo adapter aimed at laboratory and industrial imaging workflows where fast, repeatable camera attachment is required. Installation aligns the camera sensor with the microscope’s image plane to preserve focus and maximise usable image area. The optical reduction also helps to match the microscope’s image circle to the camera sensor, reducing peripheral artefacts. Routine operations benefit from fewer adjustments, minimised downtime and consistent image framing across repeat inspections. Suitable applications and who gains most from this adapter Laboratories, educational facilities and production inspection stations that use inverse microscopes will find the adapter particularly valuable for routine documentation, comparative imaging and process control. The adapter supports efficient image acquisition for tasks ranging from cell-culture checks to component inspection. Combined with Metav’s focus on accessibility and dependable supply, this accessory contributes to a streamlined imaging setup that emphasises precision and predictable results. Contact Metav Werkzeuge today for procurement and compatibility advice regarding the Euromex OX.9850 photo adapter and request integration support from their specialist consultants Technical data Article number: OX.9850 SKU: OX.9850 Brand: Euromex Product type: Microscope‑camera adapter Core specifications Magnification / reduction: 0.5× Special features Compatible with Oxion (Revision 2) and Oxion Inverso inverse microscopes Designed for 1/2‑inch cameras with C‑ring Listed in C‑Mount category FAQ What magnification effect does the adapter produce? The Euromex OX.9850 provides a 0.5× optical reduction, reducing the effective magnification to widen the captured field on a 1/2‑inch camera. Which microscopes is the adapter compatible with? Compatibility is specified for Oxion (Revision 2) and Oxion Inverso inverse microscopes; the adapter fits the optical interface used on these models. Can the adapter be used with full‑frame or larger sensors? The adapter is optimised for 1/2‑inch cameras with a C‑ring; using significantly larger sensors may lead to vignetting or require additional optical components. Does the adapter require a C‑mount camera? The unit connects to cameras that use a C‑ring on a 1/2‑inch sensor; it is categorised under C‑Mount accessories for practical integration in standard imaging setups. Is the adapter suitable for both teaching and industrial inspection? Yes, the adapter’s 0.5× reduction and secure coupling make it well suited for laboratory teaching, documentation and routine production inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from high‑resolution imaging and accurate 0.50x optical scaling for clear documentation and inspection work; the relay lens delivers reliable image reproduction and straightforward integration. Order the lens directly via Metav Werkzeuge or consult their specialists for tailored advice. C‑Mount high‑resolution 0.50x relay lens for a 1/2‑inch C‑Mount camera (Euromex DX.9850) The C‑Mount high‑resolution 0.50x relay lens for a 1/2‑inch C‑Mount camera for Delphi‑X DX.9850 is a precision optical adapter designed to deliver consistent image scaling for microscope camera documentation and quality inspection tasks. High-resolution 0.50× relay lens Designed for 1/2-inch C‑Mount cameras Compatible with Delphi‑X camera series Precise optical image scaling Optimised imaging for reliable inspection and documentation The relay lens provides an accurate 0.50x reduction that maintains the native resolution of 1/2‑inch camera sensors, enabling precise image reproduction for measurement, documentation and defect analysis. By preserving the camera’s optical performance, the adapter supports consistent field‑of‑view scaling across systems, which simplifies image comparison and calibration routines. Users benefit from reduced rework and clearer visual records when performing routine inspections or producing high‑quality images for reports. Measurable performance that improves workflow efficiency Engineered for microscope camera applications, the optical relay ensures that sensor sampling remains effective at typical inspection magnifications. The C‑Mount interface offers secure mechanical coupling and straightforward alignment, reducing setup time on the bench. Because the lens focuses on delivering a high level of detail rather than variable zoom, the workflow becomes more predictable and reproducible—valuable where repeatability and traceability are required in production or laboratory environments. Compatibility and straightforward integration Compatibility with 1/2‑inch C‑Mount camera systems, specifically configured for the Delphi‑X series, makes this relay lens a practical choice when retrofitting or upgrading existing inspection stations. The adapter is a compact optical solution for integrating a microscope with camera hardware, avoiding major changes to the existing imaging chain. Where sensor size or mounting standards differ, the fixed relay design allows technicians to assess suitability quickly and decide on minimal ancillary adjustments rather than a complete optical overhaul. Built for clarity and dependable results Optical relay solutions like this model emphasise stable image quality and reproducibility, supporting both manual and automated documentation tasks. The focus on a single, high‑resolution magnification reduces complexity in image calibration and helps maintain consistent measurement conditions. For teams that prioritise traceable results and efficient throughput, the lens contributes to lower inspection variability and clearer identification of surface details or assembly issues. For procurement or technical clarification on the Euromex 0.50x relay lens (DX.9850), contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and ordering options. Technical data Article number: DX.9850 SKU: DX.9850 Brand: Euromex Product type: Microscope camera adapter Data Magnification: 0.50x Camera sensor size compatibility: 1/2‑inch Mount: C‑Mount Special features High‑resolution relay lens Designed for Delphi‑X camera series Intended for microscope camera documentation and inspection Image scaling for consistent field of view FAQ What camera types are supported by this relay lens? The relay lens supports 1/2‑inch C‑Mount camera systems and is specified for use with the Delphi‑X series, ensuring mechanical and optical compatibility with those microscope camera setups. Does the lens change the camera’s field of view? Yes, the 0.50x relay lens provides optical scaling that halves the image magnification, offering a defined field of view that aids repeatable documentation and measurement workflows. Is this adapter suitable for measurement and inspection tasks? The high‑resolution relay design is intended for inspection and documentation work where consistent image scaling and preserved detail are required, making it suitable for many measurement applications when used with compatible microscope cameras. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise image scaling, simple C‑mount compatibility and fast integration into existing microscope camera setups for consistent documentation results; order the adapter directly via Metav Werkzeuge or consult the technical team for application advice. C‑mount photo adapter with 0.5x lens for 1/2‑inch cameras NZ.9850 — Microscope camera adapter, 0.5x reduction for wider field of view by Euromex C‑mount photo adapter with 0.5x lens for 1/2‑inch cameras NZ.9850 is a compact imaging accessory designed to adapt standard C‑mount microscope cameras and increase the recording area while preserving optical compatibility. C‑mount compatibility for 1/2‑inch cameras 0.5x reduction lens for wider field of view Simple integration with microscope camera systems Preserves image scale for consistent documentation Optimised imaging scale for wider inspection fields The 0.5x reduction lens changes the effective imaging scale to deliver a significantly larger field of view on 1/2‑inch sensors while maintaining the optical axis of the microscope camera system. By halving the effective magnification, the adapter enables broader specimen coverage without swapping objectives, which is useful for overview documentation, part inspection and rapid sample scanning. The optical behaviour is described clearly by the magnification factor: a 0.5x lens reduces image size at the sensor, thus increasing the visible area on each capture. Reliable compatibility and straightforward mounting Designed as a C‑mount accessory, the adapter fits standard C‑mount threads and aligns with common microscope camera interfaces. Mechanical compatibility is ensured by adherence to the C‑mount specification, allowing the lens element to be positioned between the microscope port and a 1/2‑inch camera to adjust the imaging scale. Integration into existing imaging chains is therefore uncomplicated and repeatable, with minimal adjustment required for focus re‑calibration after installation. The result is faster set‑up and consistent image geometry for routine documentation workflows. Practical benefits for laboratory and inspection tasks The reduction in magnification provided by the optical unit increases throughput for tasks that prioritise context over extreme detail, such as assembly checks, material inspection and educational demonstrations. Using a reduction lens can reduce the number of objective changes and expedite image capture sequences. The accessory is particularly suited to workflows where a balance between detail and overview is needed, and where stable, reproducible imaging is valued. Guidance for selection and technical clarity When matching the adapter to an imaging chain, attention should be paid to sensor format and the required imaging scale. The 1/2‑inch sensor compatibility is the decisive parameter for achieving the intended field of view expansion. For complex optical arrangements or bespoke requirements, consult the product documentation or technical advisors to ensure the adapter aligns with the chosen camera and microscope objective combination. Order the Euromex NZ.9850 via Metav Werkzeuge for reliable integration into microscope camera setups and contact Metav Werkzeuge for specific application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: NZ.9850 SKU: NZ.9850 Product type: Microscope camera adapter Facts Magnification: 0.5x Sensor compatibility: 1/2‑inch Special features C‑mount interface Reduction lens for wider field of view Intended for microscope camera systems Brand: Euromex FAQ What sensor sizes is the adapter compatible with? The adapter is specified for use with 1/2‑inch camera sensors; the 0.5x lens is optimised for that sensor format. Does the NZ.9850 fit standard C‑mount cameras? Yes, the Euromex NZ.9850 is a C‑mount photo adapter designed to mount directly to standard C‑mount microscope cameras. How does the 0.5x lens affect magnification? The 0.5x lens halves the effective magnification at the sensor, increasing the captured field of view for broader inspection and documentation. Is the adapter suitable for documentation and inspection workflows? The adapter is suited to routine documentation and inspection where a wider overview is required while maintaining compatibility with microscope camera systems. Will additional calibration be necessary after installation? After fitting the NZ.9850, a focus and scale check is recommended to ensure image geometry and focus are aligned with the chosen camera and objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Product data error: Manufacturer "Euromex" is not included in the approved manufacturer list; product description cannot be generated due to the absence of necessary verification or inclusion in the authorised database, which is required to ensure compliance with established standards and guidelines for approved manufacturers, thereby preventing the generation of accurate and reliable product descriptions that meet the expected quality and regulatory requirements, and as a result, the system cannot proceed with creating or providing the necessary details for the product in question until the manufacturer is reviewed, validated, and added to the approved list to ensure all criteria are fully satisfied.

Take advantage of a wide-field micrometer eyepiece with a 10 mm scale and 100 divisions to integrate reliable measurement into routine microscopy. The combination of a broad field of view and a finely graduated scale supports faster visual alignment and consistent results across inspection tasks. Order the eyepiece directly via Metav Werkzeuge or contact the consultants for compatibility advice. Microscope Eyepiece AE.5574 — Wide-field micrometer eyepiece 10 mm/100 by Euromex Microscope Eyepiece AE.5574 offers a micrometer scale for calibrated measurements and educational use in laboratory settings Wide-field micrometer eyepiece 10 mm/100 Precise scale for calibrated measurements Suitable for measurement and calibration tasks Integrate precise scale measurement into inspection routines The wide-field design of this micrometer eyepiece provides an enlarged visual field that eases target acquisition and improves efficiency during routine inspections. The embedded 10 mm scale divided into 100 divisions allows straightforward read-off of relative dimensions; each division corresponds to 0.1 mm on the scale, enabling quick approximate measurements without additional equipment. This reduces handling time during repeated checks and supports a more consistent workflow in teaching labs and workshop metrology. Practical benefits for education and laboratory workflows Designed for measurement and calibration tasks, the eyepiece simplifies demonstration and hands-on instruction by combining observation and scale reference in a single optical accessory. The clear graduation and wide-field viewing support faster alignment of specimens and make scale interpretation more intuitive for trainees and technicians. When integrated into standard microscopes, the micrometer function streamlines comparative measurements and documentation, supporting traceable inspection steps and reproducible results. Consistent visual reference for quality control and documentation Using an eyepiece with a fixed micrometer scale aids repeatability in visual inspections and enhances traceability in quality-control routines. The visible divisions offer an instant visual reference for estimating component features, reducing the need for switching between instruments during preliminary checks. For documentation, the eyepiece provides a reliable visual scale that can be referenced in teaching materials or inspection notes, helping to align observational findings with numeric values for follow-up measurements. Contact Metav Werkzeuge today to confirm compatibility and secure the Microscope Eyepiece AE.5574 for instructional or inspection use — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: AE.5574 SKU: AE.5574 Brand: Euromex Product type: Microscope eyepiece Description: Wide-field micrometer eyepiece 10 mm/100 UID: AE.5574 Facts Scale length: 10 mm Divisions: 100 Scale step: 0.1 mm per division Special features Wide-field view Integrated micrometer scale Intended for measurement and calibration tasks Source reference: Education PDF, p. 13 FAQ How is the scale on the eyepiece interpreted? The scale on the Microscope Eyepiece AE.5574 spans 10 mm with 100 divisions, so each division represents 0.1 mm, allowing quick visual estimation of linear dimensions. Can the micrometer eyepiece be used in teaching laboratories? Yes. The AE.5574 micrometer eyepiece is designed for educational and laboratory workflows where visual measurement aids and demonstrable scale references are required. Is the eyepiece suitable for preliminary quality checks? The integrated micrometer scale in the Microscope Eyepiece AE.5574 provides a consistent visual reference for initial inspections and comparative assessments prior to detailed metrology. Where is the technical specification sourced from? Technical information for the eyepiece is referenced from the Education PDF (page 13) stating the wide-field micrometer eyepiece 10 mm/100. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of 100x magnification, numerical aperture 1.25 and an oil-immersion design delivers markedly higher resolving power for demanding microscopy tasks; the close 0.2 mm working distance supports fine focusing on thin samples. Order the lens via Metav Werkzeuge or contact the consultants for matching objectives and accessories. AE.5601 microscope objective — Euromex 100x oil-immersion, NA 1.25 The AE.5601 microscope objective is an oil-immersion lens intended for high-resolution imaging in laboratory and educational microscopy, optimised for applications that require fine structural detail. 100x magnification for fine detail Numerical aperture 1.25 for high resolution Oil-immersion design for increased contrast 0.2 mm working distance for close focusing Achieve greater resolving power for detailed analysis With a 100x magnification coupled to a numerical aperture 1.25, this objective significantly increases the ability to distinguish closely spaced structures. The numerical aperture expresses the lens's light-gathering and resolving capability; a higher value permits finer spatial resolution and improved image sharpness. For microscopy tasks where resolving cellular or sub-cellular detail is crucial, the enhanced optical throughput reduces the need for repeated captures and supports reliable, reproducible observations. The design is aligned with laboratory workflows that prioritise precision and traceable results. Improved contrast and clarity through oil immersion The oil-immersion configuration lowers refraction between the cover slip and the lens, which increases the effective aperture and yields superior contrast at high magnification. This benefit is especially apparent on specimens with low intrinsic contrast or when visualising fine surface features. The trade-off is the requirement for correct immersion oil and careful cleaning routines after use; appropriate handling preserves optical performance and extends service life. For technicians and educators, the combination of high NA and oil coupling translates into clearer images with less post-processing, supporting faster decision-making in inspection, teaching and research contexts. Precision focusing for thin specimens and routine use A 0.2 mm working distance indicates the lens is engineered for close proximity to the specimen, offering precise focal control on thin preparations such as blood smears, bacterial films or thin tissue sections. The short working distance enhances stability when using high magnification but requires attention to sample preparation and cover-slip thickness to avoid contact. Mechanically, the objective is suitable for standard microscope turret systems that accept oil-immersion elements; verify compatibility with tube length and mounting standards as part of system integration. Robust optical construction supports frequent use in teaching labs and routine inspection benches where repeatable performance is essential. For laboratories seeking dependable high-resolution oil-immersion optics, request further technical matching and procurement through Metav Werkzeuge — expert advice and accessory recommendations are available to ensure optimal installation and use. Technical data Article number: AE.5601 SKU: AE.5601 Type: Microscope objective Brand: Euromex Facts Magnification: 100x Numerical aperture: 1.25 Working distance: 0.2 mm Immersion: Oil Special features S100x/1.25 oil immersion SMP objective Suitable for high-resolution laboratory and educational microscopy FAQ What optical performance can be expected from this objective? The AE.5601 microscope objective by Euromex offers 100x magnification and a numerical aperture of 1.25, delivering high resolving power and improved contrast when used with immersion oil. Is this lens suitable for biological thin-section work? Yes, the oil-immersion design and the 0.2 mm working distance make the objective appropriate for thin biological specimens, provided correct cover-slip thickness and immersion oil are used. How should the oil be handled and cleaned after use? After using the AE.5601 oil-immersion objective, remove oil with lens-grade cleaning solution and lint-free tissue to maintain optical performance and prevent residue build-up. Can this objective be used on any standard research microscope? The AE.5601 is designed as a standard oil-immersion objective; compatibility depends on the microscope’s turret and tube-length specifications, so checking mechanical fit is recommended. What practical benefits does the high numerical aperture provide? A numerical aperture of 1.25 increases light collection and resolution, resulting in clearer, more detailed images and reducing the need for extensive image processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, calibrated observation and a wide viewing field for faster inspection workflows; the integrated 10/100 micrometer and cross reticle support direct measurement while the 10x magnification with a 20 mm field number improves inspection speed. Order the eyepiece directly via Metav Werkzeuge or ask our consultants for tailored technical advice. iScope IS.6010-CM microscope eyepiece — 10x magnification, 20 mm field number (Euromex) An iScope IS.6010-CM microscope eyepiece designed for measurement and inspection tasks, combining a clear wide field with an integrated micrometer reticle. 10× magnification for detailed inspection 20 mm field number for wide view Integrated 10/100 micrometer and reticle cross Calibrated measurement without extra tooling The eyepiece is supplied with an integrated 10/100 micrometer and a cross reticle, enabling direct, calibrated readings at eyepiece level. This design removes the need for repeated stage calibration when quick comparative measurements are required, supporting faster decision-making on the bench. As a measurement eyepiece, it is particularly useful where traceable, repeatable visual quantification is needed; the reticle provides a consistent reference that is compatible with common optical measurement procedures. The built-in scale reduces handling time and lowers the risk of interpretation errors during routine inspections. Wide field for efficient sample assessment With a 20 mm field number, the eyepiece offers an extensive apparent field; at 10x magnification this corresponds to a real field of view of 2 mm, allowing more of the specimen to be seen without moving the stage. The Extra Wide Field (EWF) characteristic helps users scan samples faster and reduces eye strain during extended use. For educational and life-science settings, a larger view expedites teaching and documentation tasks, while in industrial inspection the benefit is fewer repositioning actions and improved throughput per operator. Practical compatibility and workshop advantages The instrument is part of the iScope series, crafted for integration into standard optical setups used in education and laboratory environments. The eyepiece’s combination of a wide field and a calibrated reticle supports both qualitative observation and quantitative checks, making it a versatile accessory for microscopes where measurement and documentation are required. Specification references are available in the Education and Life Science product PDFs (Education PDF S.24; Life Science PDF S.16), which document the EWF 10x/20 mm configuration and the included reticle. For bespoke system matching or confirmation of mechanical fit, further clarification can be provided by the distributor’s technical advisors. For workshop-ready measurement capability and reliable supply, contact Metav Werkzeuge for direct procurement or technical consultation from Emmerich – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: IS.6010-CM SKU: IS.6010-CM Brand: Euromex Series: iScope Product type: microscope eyepiece Data Magnification: 10x Field number: 20 mm Special features EWF (Extra Wide Field) 10x/20 mm eyepiece Integrated 10/100 micrometer Cross reticle Source: Education PDF S.24; Life Science PDF S.16 FAQ What measurement capability does the eyepiece provide? The integrated 10/100 micrometer and cross reticle permit direct, calibrated measurements through the eyepiece for visual dimension checks without additional accessories. Is the field of view suitable for teaching and documentation? Yes, the 20 mm field number at 10x magnification yields a broad view that supports quicker specimen scanning and clearer visual documentation in both education and laboratory contexts. Can this eyepiece be used for industrial inspection tasks? The iScope IS.6010-CM eyepiece is suited to inspection where quick visual quantification is required; the combination of 10x magnification and the reticle supports routine bench checks and comparative measurements. Where are the official specifications documented? Detailed specifications and configuration notes are provided in the Education and Life Science PDFs (Education PDF S.24; Life Science PDF S.16), which reference the EWF 10x/20 mm configuration. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Fehlinformation: Der angegebene Hersteller "Euromex" ist nicht in der vorgegebenen Herstellerliste enthalten. Bitte Herstellerangabe prüfen oder einen Hersteller aus der Liste verwenden, da nur die in der Liste aufgeführten Hersteller für die weitere Bearbeitung zugelassen sind. Es ist wichtig, sicherzustellen, dass die Angaben korrekt sind, um Verzögerungen oder mögliche Fehler bei der Verarbeitung zu vermeiden. Falls der gewünschte Hersteller nicht in der Liste enthalten ist, könnte es hilfreich sein, alternative Optionen zu prüfen oder sich an den zuständigen Support zu wenden, um weitere Informationen oder Unterstützung zu erhalten.

Benefit from 10× magnification combined with a broad 20 mm field number for precise visual measurement; order the bScope BS.6010-P directly via Metav Werkzeuge or ask our consultants if needed bScope BS.6010-P – 10× Measuring Eyepiece, 20 mm Field Number (Euromex) The bScope BS.6010-P is a measuring eyepiece intended for accurate visual measurement tasks, offering 10× magnification and a 20 mm field number for inspection and documentation workflows 10× magnification for clear detail 20 mm wide visual field for measurements Built-in pointer for precise targeting Precise measurement through larger field and magnification The combination of 10× magnification and a 20 mm field number ensures a generous viewing area while retaining the enlargement required for fine inspection. A larger field number increases the observable scene at a given magnification, which in practice means fewer stage movements and a simpler measurement routine. The integrated pointer provides a visible reference inside the field of view, enabling unambiguous marking of features and improving repeatability when comparing multiple specimens. This configuration supports consistent measurement capture and reduces the time spent aligning targets under the microscope. Streamlined inspection and documentation for workflows As a dedicated measuring eyepiece, the ocular is designed to integrate with standard inspection setups where visual scale and target indication matter. The clear numerical values for magnification and field number translate directly into predictable image scale, easing the conversion from observed units to documented dimensions. Reduced setup time and clearer alignment contribute to faster throughput and lower risk of rework, which benefits quality assurance processes and repetitive inspection tasks. The eyepiece’s features help simplify training for operators by providing an intuitive visual reference. How the eyepiece fits into metrology and education environments A measuring ocular of this specification is suited to both technical education and light industrial metrology where optical measurement remains a preferred method. The field number describes the internal diameter of the image circle in millimetres and is a standard reference for determining the actual field of view at a given magnification; understanding this helps select the right ocular for specific objectives and sample sizes. Supplied data derives from technical documentation (Education PDF S. 21; Life Science PDF S. 9), which lists the core optical parameters and confirms the presence of a pointer. For users seeking simple, repeatable optical measurement without complex digital retrofits, this eyepiece offers a compact, cost-effective solution. For tailored advice on whether the bScope BS.6010-P suits a particular microscope or application, contact Metav Werkzeuge to discuss specifications and procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.6010-P SKU: BS.6010-P Model series: bScope Type: Microscope eyepiece Core specifications Magnification: 10× Field number: 20 mm Special features With pointer Brand: Euromex Category: Measuring eyepieces Source: Education PDF S. 21; Life Science PDF S. 9 FAQ What does the 20 mm field number mean for measurements? The field number denotes the diameter of the image circle in millimetres; with the bScope BS.6010-P, a 20 mm field number provides a wider observable area at 10× magnification, simplifying alignment and stage movement during visual measurement. Is the eyepiece suitable for use in teaching laboratories? Yes. The measuring ocular’s combination of 10× magnification and a visible pointer supports demonstrative measurement tasks and student exercises that require clear reference points. Can the pointer be used for documentation and repeat measurements? The built-in pointer in the bScope BS.6010-P serves as a consistent visual reference, which aids repeatability and documentation when marking or photographing features under the ocular. Which microscopes is this eyepiece compatible with? Compatibility depends on the eyepiece tube dimensions and the microscope’s optical system; the bScope BS.6010-P is designed as a standard eyepiece for systems that accept measuring oculars—check the microscope’s eyepiece tube specification to confirm fit. Where do the technical specifications come from? The listed parameters are taken from the manufacturer’s technical documentation (Education PDF S. 21; Life Science PDF S. 9), which details the optical data for the measuring eyepiece Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a wide field of view and precise optical measurement in one compact eyepiece; the built‑in reticle and micrometer 10 mm/100 reduce measurement steps and speed up inspection routines. Order directly via Metav Werkzeuge or consult the technical team for compatibility advice. EWF Extra Wide Field 10x/22 Eyepiece DZ.3012 – 10× magnification, 22 mm extra wide field, with reticle and micrometer (Euromex) The EWF Extra Wide Field 10x/22 Eyepiece DZ.3012 is a measurement eyepiece designed for the DZ series; it combines a large visual field with an integrated reticle and a 10 mm/100 micrometer for reliable optical measurement in quality control and inspection tasks Extra wide field 22 mm Integrated reticle with 10 mm/100 micrometer 10x magnification for measurement optics Faster, more reliable optical measurements with a wide view This measurement eyepiece is engineered to increase throughput in routine inspections. The 10× magnification provides a balanced enlargement for clear component detail while the extra wide field—specified by the 22 mm field number—means more of the specimen is visible at once, reducing the need for repeated stage moves. The integrated reticle supplies fixed reference lines for alignment, while the micrometer 10 mm/100 offers a calibrated scale: a 10 mm range divided into 100 increments, yielding straightforward readings for dimensional checks. Together these features help to cut inspection time and to maintain consistent measurement conditions across shifts. Practical benefits for workshop and laboratory workflows Compatibility with the DZ series makes integration into existing microscopes uncomplicated; the eyepiece functions as a direct measurement tool without additional camera or software. The optical scale permits quick comparative checks and basic quantification at the eyepiece, which is particularly useful during setup, first-article inspection and spot‑checks. The clear markings of the micrometer and the reticle support repeatable positioning and reduce operator interpretation. For users who require traceable measurement procedures, the eyepiece simplifies visual verification steps and complements digital measuring equipment by providing a robust analogue reference. Why this eyepiece is a sensible choice through Metav Sourcing measurement optics via Metav adds a practical layer of procurement assurance: Metav combines broad product availability with established quality control processes, helping to bring precise instruments into everyday workshop use. As a distribution partner, Metav supports selection for industrial and trade customers and offers access to a wide range of metrology accessories. For additional technical data or to confirm compatibility with a particular DZ microscope model, the technical team at Metav can provide the necessary information and guidance. Contact Metav Werkzeuge to discuss the Euromex EWF eyepiece DZ.3012 and confirm fitment for DZ series microscopes; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: DZ.3012 SKU: DZ.3012 Manufacturer: Euromex Product type: Microscope eyepiece Packaging: 1 piece Key figures Magnification: 10x Field number: 22 Micrometer: 10 mm / 100 divisions Special features Extra wide field eyepiece Integrated reticle Measurement scale for optical checks Designed for DZ series microscopes FAQ What magnification does the eyepiece provide? The eyepiece offers 10× magnification, suitable for inspection work and optical measurement when used with DZ series microscopes. How does the micrometer 10 mm/100 work in practice? The micrometer integrates a 10 mm scale divided into 100 increments, enabling simple readings equivalent to 0.1 mm per division for quick dimensional checks at the eyepiece. Is this eyepiece compatible with all DZ series models? Compatibility is intended for the DZ series; confirm the specific DZ microscope model and optical tube specifications when selecting the eyepiece to ensure a correct fit. Can the reticle be used for alignment and comparative measurement? Yes, the integrated reticle provides fixed reference lines for alignment and supports comparative measurements without additional instrumentation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data error: the manufacturer "Euromex" is not included in the provided manufacturer list; as a result, it is not possible to generate the requested product description because the necessary information about this specific manufacturer is missing from the database, which prevents the system from accurately creating or delivering a detailed and reliable description for the product in question, highlighting the importance of ensuring that all relevant manufacturers are included in the list to avoid such issues and enable the generation of complete and accurate product descriptions for all requested items.

Take advantage of the combination of optical precision, a 20 mm field of view and an integrated pointer for reliable measurement and efficient inspection workflows; order the eyepiece directly via Metav Werkzeuge or consult their technical advisors for integration support. iScope IS.6010-P — Euromex microscope eyepiece, 10× magnification, 20 mm field The iScope IS.6010-P is a precision measuring eyepiece intended for microscopy applications and quality inspection where clear 10× magnification and a generous 20 mm field aid rapid visual assessment. 10× magnification for accurate observation 20 mm wide field of view for efficient surveying Integrated pointer for clear target marking Compatible with standard eyepiece tubes Precision visualisation for repeatable inspection results This eyepiece delivers 10× magnification combined with a 20 mm field number, which together provide a clear, stable image across a wide visible area. For practical purposes, the field number indicates the diameter of the observable field at the eyepiece and a larger value reduces the need for frequent stage adjustments during component inspection. The built-in pointer enables straightforward annotation of critical points in a specimen or sample without additional mechanical aids, supporting repeatable measurement routines in laboratory, teaching and incoming goods checks. Faster workflows through simple integration and clear marking Engineered as a measuring accessory, the eyepiece is designed for quick fitting into standard ocular tubes, minimising downtime when changing between instruments. The presence of the integrated pointer speeds defect marking and feature identification on-screen or through a camera adapter, which helps to reduce handling steps and increases throughput in routine inspections. This combination of optical clarity and straightforward handling enhances operational efficiency in production control and educational settings while keeping documentation processes direct and traceable. Trusted use and support for professional environments The optical specification and practical design make the measuring eyepiece suitable for a broad range of users from technical trainers to quality technicians in industry. As a component in a measurement chain, the eyepiece contributes to reliable visual checks that complement quantitative instruments. For procurement and long-term supply, partnering with a distributor that offers consistent availability and technical advice ensures that optical accessories remain a predictable part of the workflow; Metav Werkzeuge provides centralised sourcing and technical guidance for workshop and laboratory buyers. Contact Metav Werkzeuge for a technical discussion on integrating the iScope IS.6010-P measuring eyepiece into inspection setups and to arrange tailored delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: IS.6010-P Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece SKU: IS.6010-P Facts Magnification: 10x Field number: 20 mm Special features Integrated pointer EWF 10x/20 mm eyepiece with pointer (source: Education PDF p.24; Life Science PDF p.16) FAQ What magnification does the eyepiece provide? The eyepiece provides 10× magnification, suitable for standard laboratory visual inspection and teaching applications. What does the 20 mm field number mean for inspections? A 20 mm field number denotes a wide observable field at the eyepiece, reducing the need for frequent stage movement during sample review and speeding up visual surveys. Is the pointer suitable for measurement documentation? Yes, the integrated pointer allows precise marking of features within the field of view and supports consistent visual documentation when used alongside camera or digital capture setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the integrated 10/100 micrometre reticle and 22 mm super wide field to speed up routine measurements while maintaining visual comfort; order directly via Metav Werkzeuge or contact our consultants for technical advice. Euromex Super wide-field SWF 10x/22 mm eyepiece DX.6210-CM — measurement eyepiece with integrated micrometre and 30 mm tube The Super wide-field SWF 10x/22 mm eyepiece DX.6210-CM is a measurement eyepiece designed for calibrated visual inspection and routine microscopy measurement tasks, suitable for laboratory and industrial quality control applications 10× magnification for precise observation 22 mm super wide field of view Integrated 10/100 micrometre reticle Ø 30 mm standard eyepiece tube Faster measurement on the stage with an integrated scale The built-in 10/100 micrometre scale with a central reticle turns visual inspection into a repeatable measuring routine, eliminating an additional external scale for many tasks. This design shortens cycle times in inspection and quality control because measurements can be read directly through the eyepiece when combined with a suitable objective. The presence of a calibrated eyepiece scale supports traceable checks and reduces handling steps, which in turn lowers the risk of user-induced variation during series inspections. Wider view reduces repositioning and speeds inspection A 22 mm super wide field paired with 10× magnification offers a comfortable, extended viewing area that keeps more of the specimen in view and minimises frequent stage moves. For tasks that require visual comparison or surface scanning, the wider field increases throughput by enabling quicker visual assessment without sacrificing resolution. Operators experience reduced eye and neck strain during extended use, which contributes to consistent inspection quality across longer shifts. Straightforward integration with standard microscopes The eyepiece is built for compatibility with conventional housings thanks to its Ø 30 mm tube, which matches many commercial microscopes and inspection systems. Integration is typically uncomplicated: the eyepiece replaces an existing ocular insert and provides an immediate measurement capability without altering the optical train. For installations where a different tube size is present, standard adapters are commonly available to retain optical alignment and preserve the calibrated reticle functionality. Practical choice for labs and production benches Designed for routine metrology and inspection, this measurement eyepiece supports a range of users from workshop technicians to laboratory analysts who need a reliable visual measuring aid. The robust SWF optical concept improves image comfort during repetitive checks, while the integrated scale supports rapid decision-making in process control. If additional technical data or calibration guidance is required, Metav Werkzeuge provides product support and procurement assistance to ensure the eyepiece fits the application and workflow. Contact Metav Werkzeuge for tailored advice on adopting the Euromex measurement eyepiece DX.6210-CM in inspection processes; Metav's team in Emmerich can advise on compatibility, supply and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.6210-CM SKU: DX.6210-CM Manufacturer: Euromex Product type: microscope eyepiece Core specifications Magnification: 10× Field of view: 22 mm Tube diameter: Ø 30 mm Special features Super wide-field (SWF) design Integrated 10/100 micrometre and reticle Category: measurement eyepiece (messokulare) FAQ What magnification does the eyepiece provide? The eyepiece delivers 10× magnification, which is suitable for calibrated visual inspection and complements a wide range of microscope objectives when using the Euromex measurement eyepiece DX.6210-CM. Will this fit my microscope's eyepiece tube? The eyepiece uses a Ø 30 mm tube, compatible with many standard microscopes; the Euromex DX.6210-CM typically installs without optical modification when the instrument accepts a 30 mm ocular. How is the 10/100 micrometre reticle used for measurements? The 10/100 micrometre reticle provides an internal calibrated scale visible in the eyepiece; when used together with the objective's calibration factor, the scale enables direct measurements at the specimen plane with the Euromex measurement eyepiece DX.6210-CM. What applications suit this measurement eyepiece? Typical uses include routine quality control, dimensional checks, surface inspection and laboratory measurements where a quick, eyepiece-based scale supports decision-making and process control. How should the eyepiece be cleaned and maintained? Clean optical surfaces with appropriate lens tissue and cleaning fluid; avoid abrasive materials and excessive pressure. The reticle requires careful handling to maintain calibration and image clarity. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precision measurement is delivered by the combination of a 10x WF eyepiece and a 20 mm field number; the focusable micrometer lens and a standard 30 mm barrel diameter ensure accurate, repeatable readings and straightforward integration — order directly via Metav Werkzeuge or consult their specialists for technical advice. BioBlue.Lab BB.6110 microscope eyepiece — WF 10x, 20 mm field number BioBlue.Lab BB.6110 is a WF 10x micrometer eyepiece with a focusable lens and a Ø 30 mm tube, designed for measurement and teaching applications in laboratory and education environments. WF 10x magnification for clear detail 20 mm field number for wide viewing Focusable lens for precision measurement 30 mm barrel diameter, industry standard Precise optical basis for reliable measurements The WF 10x configuration with a 20 mm field number provides a broad, sharp field of view that supports measurement tasks with less eyepiece rotation and faster target acquisition. As a micrometer eyepiece, the optical assembly includes a focusable lens which helps to eliminate parallax and stabilise the reticle plane relative to the specimen, improving repeatability in routine measurements. The combination of wide field and moderate magnification makes this ocular suitable for standard documentation and measurement routines in teaching labs and light-microscopy workflows. Measurement benefits and practical integration A focusable micrometer eyepiece allows fine adjustment of the optical plane so the measurement scale can be brought into sharp alignment with the sample plane; this reduces reading error when comparing dimensions. Compatibility with a Ø 30 mm tube ensures mechanical fit with a large number of microscopes and heads commonly used in educational and life-science settings. The optical design supports straightforward calibration against stage micrometers and delivers consistent measurement references without complex setup. Fit, use cases and reference documentation The eyepiece is particularly well suited to instructional laboratories, routine quality checks and comparative measurement tasks where clear, reproducible visual scales are required. The robust, standard-sized barrel simplifies swapping between instruments and keeps instrument downtime low. Reference: Education PDF S. 16; Life Science PDF S. 12 for original specification details and application notes that document magnification and field characteristics for teaching and research contexts. For reliable measurement tasks select the Euromex BioBlue.Lab BB.6110 eyepiece and contact Metav Werkzeuge for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BB.6110 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope eyepiece SKU: BB.6110 Facts Magnification: 10x Field number (FN): 20 mm Barrel diameter: Ø 30 mm Special features WF eyepiece Micrometer eyepiece with focusable lens Reference: Education PDF S. 16; Life Science PDF S. 12 FAQ What magnification and field size does the eyepiece provide? The BioBlue.Lab BB.6110 delivers 10x magnification with a 20 mm field number, providing a wide visual field suitable for measurement and observational tasks. Is the eyepiece suitable for measurement work? Yes; the BB.6110 is a micrometer eyepiece with a focusable lens, designed specifically to support measurement and to reduce parallax when used with stage micrometers. Will the eyepiece fit common microscope tubes? The eyepiece uses a Ø 30 mm barrel diameter, matching the industry standard for many educational and research microscopes and simplifying instrument pairing. Can this eyepiece be used in teaching laboratories? The optical design and robust compatibility make the BioBlue.Lab BB.6110 well suited to teaching environments, where repeatable visual measurement and ease of use are priorities. How should the eyepiece be calibrated for accurate readings? Calibration is typically performed with a stage micrometer; the focusable lens on the BB.6110 facilitates alignment of the reticle plane to the specimen plane before recording measurement values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 10x magnification and a wide 18 mm field number for precise, repeatable measurements; the integrated pointer supports quick alignment and documentation. Order the eyepiece directly via Metav Werkzeuge or consult the Metav specialists for application advice. EcoBlue EC.6010-P microscope eyepiece – 10x wide-field with pointer (Euromex) EcoBlue EC.6010-P is a measurement-focused microscope eyepiece designed for accurate visual inspection and simple coordinate marking in laboratory and workshop environments. Wide-field 10x magnification 18 mm field number for extended view Integrated pointer for alignment Measurement eyepiece category for metrology Accurate magnification for consistent inspections The 10x magnification of this eyepiece provides a reliable, standard level of enlargement that is widely used in visual inspection and metrology tasks. With a wide-field design, operators benefit from a larger apparent field of view, which reduces the need for repeated stage adjustments and speeds up routine checks. This results in measurable time savings in repeated inspection cycles and supports consistent documentation when comparing specimens or components. Pointer-assisted alignment that simplifies measurement An integrated pointer is built into the eyepiece to mark features directly in the field of view. The pointer speeds up visual alignment and reduces reading errors during manual measurement tasks; it is particularly useful for comparing positions, marking defect locations or guiding digital image annotation. As a measurement eyepiece, it turns a standard visual inspection into a more controlled, reproducible process without the need for additional accessories. Wide field number explained and practical benefits The field number (18 mm) indicates the diameter of the viewable area at the eyepiece and, together with magnification, determines how much of the specimen can be seen at once. A larger field number means less panning and quicker context assessment for complex parts. For busy workshops and teaching labs, this translates into fewer interruptions during inspections and a smoother workflow when scanning assemblies or aligning multiple reference points. Durable specification and series consistency Part of the EcoBlue series, this eyepiece is specified to fit standard optical tubes and to integrate with common inspection microscopes used in education, quality control and light metrology. The design focuses on functional robustness and straightforward handling so that throughput remains high in repetitive tasks. The measured construction ensures that repeatability and clarity are prioritised over decorative features, supporting a professional, task-oriented environment. Contact Metav Werkzeuge for tailored advice on integrating the EcoBlue EC.6010-P into an inspection routine or to discuss suitable microscope pairings and calibration options. Technical data Article number: EC.6010-P Manufacturer article number: EC.6010-P SKU: EC.6010-P Brand: Euromex Model series: EcoBlue Product type: microscope eyepiece Numerical data Magnification: 10x Field number: 18 mm Features WF (wide-field) eyepiece Integrated pointer for alignment Measurement eyepiece category Source: Education PDF, p. 9 FAQ What magnification does the eyepiece provide? The EcoBlue EC.6010-P delivers 10x magnification, a standard level for visual inspection and metrology tasks. How wide is the visible field with this eyepiece? The eyepiece has a field number of 18 mm, offering an extended view to reduce stage adjustments and speed inspections. Is there a way to mark or indicate features in the view? Yes, the integrated pointer in the EcoBlue EC.6010-P enables direct alignment and marking within the field of view for quicker comparison and documentation. Can this eyepiece be used for measurement tasks in educational settings? The measurement-focused design and wide field suit teaching labs and training environments where visual alignment and reproducible observation are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 10x magnification, a wide 18 mm field number and an integrated micrometer scale for faster, more reliable measurement and documentation in routine microscopy. Order the eyepiece directly via Metav Werkzeuge or contact our consultants for matching and calibration advice. MicroBlue MB.6010-M — Measuring eyepiece, 10x wide field (Euromex) MicroBlue MB.6010-M is a 10x measuring eyepiece designed for precise scale measurements and documentation in microscopy and inspection applications. Wide field 10x / 18 mm eyepiece Integrated micrometer scale for measurement Designed for measurement and documentation Precision measurement ready for routine labs The 10x magnification combined with an 18 mm field number delivers a noticeably wider visual area compared with standard eyepieces. The field number denotes the diameter of the view in millimetres and, when paired with a defined objective, determines the actual field of view at specimen level. This wider field reduces time spent repositioning samples and helps technicians achieve precision measurement more efficiently, supporting higher throughput in inspection and teaching environments. Measure directly through the eyepiece for faster results The integrated micrometer scale allows visual measurements without immediate recourse to external calibration targets or complex camera setups. As a measuring eyepiece, it supplies a built-in reference that streamlines simple dimensional checks and quick comparative assessments. For users less familiar with optical metrology, this means fewer steps from observation to result and clearer traceability when documenting component dimensions or specimen features. A practical component for metrology-focused workflows Designed as an accessory for measurement-focused microscopy, this eyepiece supports consistent documentation and improved repeatability in routine tasks. The combination of wide field optics and an eyepiece scale reduces the need for repeated image captures and post-processing, which in turn speeds decision-making on the shop floor or in the laboratory. For procurement, the eyepiece represents a compact, low-complexity option that complements digital imaging or analogue inspection systems while maintaining clarity and measurement reliability. For specification matching or procurement support for the Euromex measuring eyepiece, contact Metav Werkzeuge for tailored advice and stock information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MB.6010-M Manufacturer: Euromex Model series: MicroBlue Product type: Measuring eyepiece Facts Magnification: 10x Field number: 18 mm SKU: MB.6010-M Special features Wide field design Integrated micrometer scale Education PDF reference: page 7 FAQ What magnification and field of view does the eyepiece provide? The eyepiece delivers 10x magnification with a field number of 18 mm, giving a wide visual area for measurement and observation with reduced need for specimen repositioning. How does the field number affect measurements? The field number determines the visible diameter in the eyepiece; combined with objective magnification it defines the actual field of view at specimen level, which is essential for converting eyepiece graduations into real-world units when using the micrometer scale. Can the micrometer scale be used for documentation and teaching? Yes, the integrated micrometer scale in the measuring eyepiece supports direct visual measurement and clear documentation during demonstrations and routine inspections without immediate reliance on image-processing calibration. Is additional calibration required to obtain absolute dimensions? Absolute dimensions depend on the microscope objective and tube length; the eyepiece scale provides repeatable relative measurements, and calibration against a stage micrometre is recommended for traceable absolute values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a 0.5x reduction optic with a robust C‑mount interface for 1/2 inch microscopy cameras, this adapter expands the usable field of view while preserving image alignment; order directly via Metav Werkzeuge or contact our consultants for fit and compatibility advice. Euromex SB.9850 C‑mount adapter — 0.5x for 1/2 inch cameras The Euromex SB.9850 is a C‑mount adapter engineered to integrate 1/2 inch microscopy cameras into standard C‑mount systems for imaging, documentation and inspection tasks. Secure C‑mount coupling for reliable fit 0.5x optics for expanded field of view Optimised for 1/2 inch camera sensors Widen the observation area without sacrificing clarity The 0.5x reduction lens decreases effective magnification, which directly increases the observable scene on a 1/2 inch sensor. This is particularly valuable when documenting larger specimens or when a broader context is needed during inspection; the result is an enlarged field of view that reduces the need for mechanical stage movement and accelerates routine workflows. The optical reduction also helps to match microscope optics to smaller camera sensors, improving image framing while keeping central sharpness and maintaining alignment with C‑mount optical trains. Fast, secure mechanical integration with established standards As a C‑mount device, the adapter offers a standardised mechanical interface that simplifies attachment to microscope camera ports and C‑mount objectives. Installation is straightforward: the adapter threads onto the microscope camera or camera tube and the camera mounts onto the adapter via the C‑mount thread, avoiding bespoke fittings. The mechanical reliability reduces setup time in repeat tasks and aids reproducibility in inspection reports. The SB.9850 is therefore well suited to labs and inspection benches where rapid camera changes or frequent reconfiguration occurs. Practical benefits explained for procurement and operators Beyond the optical conversion, the adapter reduces the number of additional elements required to adapt cameras to microscopes, which can lower inventory complexity. By expanding the scene captured on a 1/2 inch camera, fewer stitched images are required and documentation speed is improved, offering a measurable efficiency gain in high-throughput environments. The design reduces reliance on expensive camera upgrades when the principal requirement is a wider overview rather than higher magnification, making it a cost-effective addition to imaging setups. Typical applications and where this adapter adds value The device is suitable for educational laboratories, quality-control stations and industrial inspection where accurate visual records are needed quickly. In metallography, electronics inspection and general microscopy documentation it provides an intuitive way to adapt existing cameras for broader scenes. Supported by Metav’s technical advisors, compatibility checks are straightforward and help ensure the adapter meets the specific needs of the imaging chain, from optics to sensor geometry. Contact Metav Werkzeuge for compatibility assessment and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SB.9850 and its fit for intended workflows Technical Data Article number: SB.9850 SKU: SB.9850 Brand: Euromex Product type: Microscope camera adapter Data Magnification: 0.5x Compatible sensor size: 1/2 inch Special features C‑mount standard Optimises field of view for inspection imaging For 1/2 inch microscope cameras FAQ Is the SB.9850 compatible with other sensor sizes besides 1/2 inch? The SB.9850 is optimised for 1/2 inch sensors; use with other sensor sizes is possible but will change the effective field of view and framing, so checks are recommended. How does the 0.5x reduction affect image magnification and field of view? A 0.5x reduction halves the microscope's effective magnification on the camera and approximately doubles the field of view, making larger areas visible without moving the specimen. Does the adapter fit standard C‑mount threads? Yes, the SB.9850 conforms to the C‑mount standard for mechanical connection, providing a secure and repeatable mounting solution. Which applications benefit most from this adapter? Documentation, inspection and educational imaging tasks benefit most where wider scene capture is required without changing objectives or cameras. Will the SB.9850 require optical recalibration of the microscope? In most cases no recalibration is necessary; alignment checks and focus adjustment are sufficient after fitting the SB.9850 to confirm optimal image quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Product data error: the manufacturer "Euromex" is not included in the approved manufacturer list; please verify the product's brand information, ensure that the details provided align with the authorised manufacturers, and confirm whether the product meets the necessary compliance requirements or if additional steps are needed to rectify the discrepancy before proceeding with any further actions or decisions related to this item.

The compact stage combines a reliably sized working surface with a central glass plate for transmitted-light observation, giving a stable, versatile platform for routine microscopy. Order the unit directly via Metav Werkzeuge or contact their consultants for tailored advice and secure delivery. Euromex AE.1896 microscope stage — 145 x 115 mm with central glass plate Euromex AE.1896 is a compact microscope stage designed for precise specimen positioning in standard laboratory and educational setups. Stage size 145 x 115 mm Central glass plate for transmitted light Compact, stable platform for microscopes Article number AE.1896 Accurate specimen positioning for consistent results A clearly defined working area of 145 x 115 mm offers a predictable footprint for trays, slides and small fixtures; this measured format supports reproducible specimen placement across multiple tasks. The central glass plate is intended for transmitted-light applications, enabling illumination from below without additional stage modification. Together, the compact dimensions and glass insert provide a practical balance of precision and visibility that assists routine inspection and documentation workflows. Stable platform engineered for straightforward integration Engineered as a simple yet robust accessory, the stage provides a stable platform that reduces lateral movement during observation. The unobtrusive design keeps the optical path clear while allowing other microscope accessories to remain accessible. Its form factor suits benches and teaching microscopes where space is at a premium, offering a dependable support surface without complex mounting requirements. This reliability helps to maintain measurement consistency and reduces time spent on repositioning. Practical benefits in laboratory and classroom environments Designed with everyday use in mind, the stage assists tasks such as sample preparation, quality checks and instructional demonstrations. The glass plate simplifies transmitted-light inspection, improving contrast for thin or translucent specimens and making visual assessment more efficient. The compact stage format also eases storage and transport between workstations, supporting flexible lab layouts and shared equipment pools without compromising on handling comfort or visual access. Handling and upkeep for long service life The central glass insert can be kept clear with routine cleaning using appropriate, microscope-safe agents and lint-free wipes, preserving optical clarity and reducing artefacts in observation. The simple construction minimises strands and crevices where contaminants can accumulate, so maintenance is quick and predictable. Careful handling during slide placement and removal further extends the practical lifespan of the stage while ensuring consistent performance. For professional specimen handling with reliable visibility and repeatable placement, request the Euromex AE.1896 via Metav Werkzeuge — experienced consultants in Emmerich can advise on compatibility and delivery; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements Technical Data Article number: AE.1896 SKU: AE.1896 Manufacturer: Euromex Product type: Microscope stage Facts Stage size: 145 x 115 mm Central glass plate: yes Special features Central glass plate for transmitted-light observation Compact footprint for laboratory and teaching use FAQ What are the exact dimensions of the stage? The stage measures 145 x 115 mm; these dimensions refer to the working surface of the Euromex AE.1896 microscope stage. Is the central glass plate suitable for transmitted-light illumination? Yes, the central glass plate in the Euromex AE.1896 is intended to facilitate transmitted-light observation and to improve contrast for thin or translucent specimens. Which article number and brand identify this stage? The product is the Euromex AE.1896 microscope stage, article number and SKU AE.1896. What typical applications suit this stage? The compact stage is suitable for routine laboratory inspection, educational demonstrations and general microscopy tasks where a stable, accessible working surface is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Optimised camera coupling for routine documentation: the OX.9833 provides a 0.33x optical reduction for correct sensor coverage and mounts to Oxion (Revision 2) and Oxion Inverso inverted microscopes via a C‑ring, ensuring consistent imaging across sessions; order the Euromex OX.9833 directly via Metav Werkzeuge or ask our consultants if needed. Euromex OX.9833 — Photo adapter with 0.33x objective for Oxion inverted microscopes The OX.9833 is a photo adapter with a 0.33x objective designed to couple 1/3‑inch cameras to Oxion (Revision 2) and Oxion Inverso inverted microscopes for reliable image capture in laboratory and teaching environments 0.33x optical reduction for correct scaling Compatible with Oxion Revision 2 and Inverso Fits 1/3‑inch cameras with C‑ring Ensure correct image scale for documentation and analysis The optical reduction of 0.33x delivers a predictable field of view adjustment that aligns microscope ocular optics with small‑format camera sensors. This adapter reduces the microscope image so that a 1/3‑inch sensor receives a properly scaled image, avoiding unexpected cropping or loss of peripheral detail. Such predictable scaling improves repeatability in image documentation and simplifies post‑processing, which is particularly valuable for routine quality control and comparative imaging tasks. Simple integration with Oxion inverted microscope systems Designed for direct mounting to Oxion (Revision 2) and Oxion Inverso models, the adapter uses a C‑ring interface compatible with standard C‑mount camera fittings. The mechanical fit allows fast attachment and removal, supporting workflows that alternate between visual inspection and image capture. By matching the mechanical and optical interfaces, the unit reduces setup time and prevents unnecessary realignments, supporting higher throughput in busy labs and teaching rooms. Optical behaviour explained for reliable sensor matching The adapter’s 0.33x objective functions as an image reducer: the microscope’s intermediate image is reduced to the correct size for a 1/3‑inch sensor, lowering the risk of vignetting and improving image uniformity across the frame. In practice, this means a larger effective working area is captured on the camera sensor without changing the microscope’s objective or tube optics. For users unfamiliar with sensor geometry, this optical reduction translates directly into fewer retakes and more usable images from the first capture. Stable performance for workshop, teaching and laboratory use Built to complement established microscope systems, this camera adapter offers consistent mechanical alignment and optical behaviour for repeated daily use. The Euromex construction emphasises precision and compatibility rather than superfluous features, supporting reliable image capture across sessions. For mixed environments where several camera types or microscopes are in use, the adapter simplifies equipment standardisation and helps maintain consistent documentation standards across teams. Request the Euromex OX.9833 from Metav Werkzeuge for dependable camera coupling and advice on integration to your Oxion system — Metav’s consultants in Emmerich can advise on compatibility and delivery to your workshop. Technical data Article number: OX.9833 Manufacturer: Euromex Product type: Microscope camera adapter Facts Magnification: 0.33x Camera format: 1/3‑inch Mount: C‑ring / C‑mount Special features Compatible with Oxion (Revision 2) and Oxion Inverso For inverted microscopes and camera coupling Optical reduction for camera sensors FAQ What cameras are compatible with this adapter? The adapter is designed for 1/3‑inch cameras with a C‑ring interface; the Euromex OX.9833 matches standard C‑mount fittings for direct camera attachment. Does the adapter change the microscope magnification? The unit provides a 0.33x optical reduction to match the microscope image to the camera sensor; it does not alter the objective seated in the microscope but changes the image scale delivered to the camera. Is the adapter suitable for Oxion Revision 1 models? Compatibility is specified for Oxion (Revision 2) and Oxion Inverso; the Euromex OX.9833 is not listed for older revisions and should be checked against the microscope’s mechanical interface before use. Will the adapter reduce vignetting on small sensors? By matching the intermediate image to a 1/3‑inch sensor, the adapter helps reduce vignetting and improves image uniformity for cameras with smaller sensors. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust aluminium case that is designed specifically for safe handling and storage of NexiusZoom microscopes with their stands; the lightweight construction supports frequent transport while preserving instrument integrity. Order the case directly via Metav Werkzeuge or consult their specialists for delivery and compatibility advice. Aluminium case for NexiusZoom microscopes with stands (P/S/PG) NZ.4300 by Euromex The aluminium case for NexiusZoom microscopes with stands (P/S/PG) NZ.4300 offers secure transport and storage for laboratory and field use, engineered for compatibility with the NexiusZoom range and their P, S and PG stand variants. Robust aluminium shell for secure transport Compatible with NexiusZoom P, S and PG stands Designed for microscope transport and safe storage Protection that keeps instruments ready for work The aluminium case is intended to provide reliable protection when microscopes are moved between workstations or stored between uses. Constructed from metal that resists everyday knocks and handling, it reduces the risk of impact and environmental exposure during transit. This means instruments remain calibrated and ready, so operational downtime is minimised and productivity is supported. Compatibility and practical handling for workshops and labs Designed specifically for the NexiusZoom microscopes, the case accommodates the microscope together with its stand variants and associated small components, helping to keep items organised during transport. The tailored design supports safe handling routines in both industrial and educational settings, enabling technicians and engineers to move equipment confidently between locations without compromising instrument alignment. Reliable logistics and professional support for purchasing decisions Suppliers and procurement teams benefit from a transport solution that simplifies logistics: a single, durable case reduces packing time and protects capital equipment during distribution. Metav Werkzeuge acts as a dependable sourcing partner and can supply product information, availability updates and logistics support from their Emmerich location, helping to integrate procurement into existing workshop supply chains. Contact Metav Werkzeuge today for availability and tailored advice on the Euromex aluminium case NZ.4300; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: NZ.4300 SKU: NZ.4300 Manufacturer: Euromex Dimensions & weights No numerical data provided Materials & features Material: aluminium case Application: transport for NexiusZoom microscopes with stands P/S/PG Product category: microscope transport case FAQ Is the case suitable for all NexiusZoom microscope models? The aluminium case NZ.4300 is specified for NexiusZoom microscopes with the P, S and PG stand variants and is intended to accommodate the instrument and its stand configuration. What level of protection does the case offer during transport? The Euromex aluminium case provides secure transport and protection against routine handling and movement, helping to reduce shock and exposure-related risks when instruments are relocated. Can the case be used for storage as well as transport? Yes, the design of the microscope transport case supports both safe storage and transport, helping to keep equipment organised and ready for immediate use. Are additional accessories included with the case? The product information lists the aluminium transport case intended for NexiusZoom microscopes; details on included accessories are not specified and can be confirmed with Metav Werkzeuge. How can procurement teams confirm availability and lead times? Availability and delivery information can be provided by Metav Werkzeuge; contact details are available in the product listing and in the purchase communication. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 0.5x optical reduction combined with the standard C‑Mount interface for flexible camera integration and wider fields of view; order the adapter directly via Metav Werkzeuge or consult our team for compatibility advice. C‑Mount Adapter 0.5x for Zeiss 60N‑C / 60N‑T2 (AE.9850‑ZA) — Microscope Camera Adapter by Euromex The C‑Mount Adapter 0.5x for Zeiss 60N‑C / 60N‑T2 (AE.9850‑ZA) is a microscope camera adapter that enables 0.5x optical coupling between Zeiss photo ports and C‑mount cameras for documentation and inspection tasks 0.5x optical reduction for wider field of view Compatible with Zeiss 60N‑C and 60N‑T2 ports Standard C‑Mount thread Ø25.4 mm, 32 TPI Fits Axio, Imager, Observer and Stemi series Capture larger areas with reduced effective magnification The 0.5x reduction provided by this adapter increases the observable area on the sensor, making it easier to document larger specimens or assemblies without changing objective lenses. By halving the image scale, the adapter helps to reduce vignetting when using larger camera sensors and improves the match between microscope optics and digital detectors. This results in more efficient image capture for routine documentation, teaching or process control while preserving optical integrity. Dependable compatibility across Zeiss photo ports and microscope lines Designed for direct use with Zeiss 60N‑C / 60N‑T2 photo interfaces, the adapter supports a broad range of systems including Axio Examiner, Imager, Lab, Observer, Scope and Zoom configurations as well as Stemi 508 and SteREO Discovery. Compatibility with established Zeiss ports ensures predictable mechanical fit and optical alignment, reducing setup time in laboratory and inspection environments and allowing existing imaging chains to be extended with minimal adjustments. Standardised mechanical interface for reliable mounting The adapter uses the recognised C‑Mount standard with a thread diameter of Ø25.4 mm (1 inch) and 32 threads per inch (TPI), ensuring secure connection to C‑mount cameras and accessories. The standardised thread and precision machining maintain concentricity and minimise tilt, which supports consistent sensor coverage and reliable repeatability when cameras are mounted and removed for maintenance or tool changes. Sensor selection should follow the camera matrix to avoid mismatches in sensor size and optics. Practical applications and target users This adapter is suited to laboratories, quality assurance departments, educational institutes and industrial inspection stations that require dependable camera integration with Zeiss microscopes. It is particularly useful for users who need to increase the field of view without replacing objectives, for photodocumentation workflows, and for teams standardising camera setups across multiple benches. The accessory supports streamlined workflows and reduces the number of objective swaps during routine imaging tasks. For technical guidance and fast delivery of the Euromex C‑Mount Adapter 0.5x (AE.9850‑ZA), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — Metav Werkzeuge can advise on sensor selection and compatibility and arrange prompt supply to the workshop Technical Data Article number: AE.9850‑ZA Adapter: 0.5x Connection: C‑Mount Manufacturer: Euromex Product type: Microscope camera adapter SKU: AE.9850‑ZA Core specifications Magnification: 0.5x Thread diameter: Ø25.4 mm (1 inch) Thread pitch: 32 TPI Compatibility & special features Compatible with Zeiss 60N‑C and 60N‑T2 photo ports Fits Axio Examiner, Imager, Lab, Observer, Scope, Zoom Compatible with Stemi 508 and SteREO Discovery Standard C‑Mount interface Sensor class: select according to camera matrix FAQ Can this adapter be used with all C‑mount cameras? The adapter provides a standard C‑Mount thread and therefore mounts to typical C‑mount cameras; sensor size and camera matrix should be checked to ensure optimal coverage when using the Euromex AE.9850‑ZA. Will the 0.5x adapter change the working distance or image quality? The 0.5x optical reduction alters the image scale and increases the field of view but does not change the microscope’s objective working distance; image quality depends on the match between optics and the chosen camera sensor. Is the adapter compatible with non‑Zeiss microscopes that have a C‑mount port? If a microscope exposes a standard C‑Mount thread, the Euromex adapter can interface mechanically; when using non‑Zeiss photo ports, optical alignment and sensor class should be verified before routine use. Does the AE.9850‑ZA require additional spacers or adapters for certain camera models? Some camera-lens combinations may need spacers to achieve optimal back focal distance; consult camera specifications and the sensor matrix to determine if additional spacing is necessary for the Euromex adapter. Which applications benefit most from the 0.5x reduction? Applications that require broader context imaging—such as assembly inspection, educational demonstrations, or documentation of larger samples—benefit from the reduced magnification and larger field of view provided by this adapter. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precision optics and compact C‑Mount format to expand field of view and improve sensor coverage in existing Delphi‑X imaging setups; order the relay lens directly via Metav Werkzeuge or consult our specialists for application advice. C-Mount high-resolution relay 0.35x lens for 1/3 inch C-Mount camera – Euromex DX.9835 The C-Mount with high-resolution relay 0.35x lens for 1/3 inch C‑Mount camera for Delphi‑X DX.9835 is a compact relay optic designed to adapt and optimise 1/3 inch camera sensors within Delphi‑X microscope and inspection systems. High-resolution 0.35x relay lens For 1/3 inch C-Mount cameras Compatible with Delphi-X systems Model DX.9835 by Euromex Optimised optics for wider sensor coverage and image fidelity The relay lens delivers a 0.35x optical reduction that increases the field of view on a 1/3 inch sensor while preserving image sharpness. By using a high-resolution relay lens, the optical image circle is matched to the camera format, which reduces vignetting and improves sensor coverage so more pixels capture useful image information. In practice this means larger inspection areas per frame and fewer stitching operations for metrology or defect analysis, enabling more efficient image acquisition in routine inspection tasks. Seamless integration into microscopy and industrial inspection The adaptor is built to the C‑Mount standard, ensuring mechanical compatibility with a wide range of microscope camera ports and industrial imaging heads. Designed for Delphi‑X camera systems, the relay optic maintains alignment and focus stability required in quality control and laboratory environments. By converting the microscope output to an optimised scale for the sensor, the relay lens supports accurate documentation and reliable measurement workflows, which is particularly valuable for traceable inspections and photographic records in production environments. Practical performance, mounting and the right application fit Mechanical mounting follows the established C‑Mount thread, enabling quick attachment and repeatable positioning. The optical design emphasises precision over decorative features: reliable imaging, consistent scale conversion and durable use in laboratory and workshop conditions. This relay lens is suited for microscopy, material inspection and any application where increasing the effective field of view of a 1/3 inch sensor benefits throughput. The compact format keeps the optical path short, reducing handling effort and simplifying integration into existing setups. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DX.9835 relay lens into Delphi‑X systems and to arrange procurement or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.9835 SKU: DX.9835 Brand: Euromex Product type: microscope camera adapter Facts Magnification: 0.35x Special features C‑Mount compatibility For 1/3 inch C‑Mount camera High-resolution relay lens Compatible with Delphi‑X FAQ What sensor formats is the relay lens optimised for? The relay lens is optimised for 1/3 inch C‑Mount cameras and improves sensor coverage when used with compatible Delphi‑X imaging setups. Does the lens change the working distance of the microscope objective? The relay lens modifies the image scale delivered to the camera; working distance at the specimen is set by the microscope objective, while the relay adapts the image to the 1/3 inch sensor. Is the Euromex DX.9835 suitable for industrial inspection cameras? Yes, the Euromex DX.9835 microscope camera adapter is intended for inspection and microscopy workflows where a 0.35x relay improves field of view and imaging efficiency. Will the relay lens cause vignetting on larger sensors? The relay is specified for small‑format sensors; when used with a 1/3 inch sensor the design reduces vignetting. Larger sensors may experience image circle limitations and are not the intended application. How does the relay lens affect image resolution? By matching the optical image circle to the sensor and providing a high-resolution relay, the DX.9835 maintains usable resolution while increasing the captured area, supporting clearer images for inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com