75-100mm Micrometer Screw Gauge 0.001mm Resolution, Ratchet, ISO 17025 Cal Cert - Microtech Metrology
€129.00
Product information "75-100mm Micrometer Screw Gauge 0.001mm Resolution, Ratchet, ISO 17025 Cal Cert - Microtech Metrology"
Take advantage of the combination of 1 µm resolution, a ratchet stop for repeatable contact pressure and an ISO 17025 calibration certificate for immediate traceability; order the micrometer directly via Metav Werkzeuge or consult our technical team for application advice.
Microtech Precision Outside Micrometer — 75–100 mm, 0.001 mm resolution
The Precision Outside Micrometer by Microtech Metrology is a workshop-grade measuring instrument for accurate external measurements across the 75–100 mm range.
- 1 µm resolution for ultra-fine measurement
- Friction thimble with ratchet stop for repeatable readings
- ISO 17025 calibration certificate included
- Anvil diameter Ø 6.5 mm for secure contact
Precision that secures process control
The instrument delivers 1 µm resolution combined with a stated accuracy of ±0.003 mm, which means exceptionally fine discrimination and reliable tolerance checking. Resolution describes the smallest incremental step the scale shows; accuracy defines how close measurements are to the true value. Together they allow stable pass/fail decisions on small tolerances, reducing rework and scrap. Classified as a micro-range device (measuring range up to 100 mm), it suits fine mechanical work where repeatability and clear numerical resolution are decisive for quality control.
Designed for consistent, fatigue‑free measurement
A friction thimble paired with a ratchet stop ensures consistent application of measuring force, removing a common source of operator error and providing uniform contact pressure across many cycles. The Ø 6.5 mm anvils give a defined contact area that supports stable centring on turned or milled diameters. The mechanical, analogue construction is robust and immediate to use on the shop floor; the ratchet also protects delicate surfaces and helps avoid over‑tightening, which extends tool life and preserves part geometry.
Calibrated and traceable for compliance
The tool is supplied fully calibrated with an ISO 17025 calibration certificate, which documents traceability and measurement uncertainty for audits and internal quality procedures. This formal calibration eliminates the need for an additional initial verification step and supports integration into documented quality workflows. For precision labs and suppliers that must demonstrate conformity, the included certificate simplifies acceptance and saves time during inspection rounds.
Contact Metav Werkzeuge today for tailored advice and to reserve calibrated units for immediate delivery from Emmerich.
Technical Data
- Article number: 110111000
- GTIN: 4061905456879
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 75–100 mm
- Resolution: 0.001 mm
- Accuracy: ±0.003 mm
- Analogue display: yes
- Calibration: ISO 17025 certificate included
Special features
- Friction thimble with ratchet stop
- Anvil diameter Ø 6.5 mm
- High accuracy, micro-range classification
- Suitable for precision workshop and laboratory use
FAQ
What measuring range does this micrometer cover?
The micrometer covers a measuring range of 75–100 mm, placing it in the micro-range class for fine mechanical measurements.
Is the instrument delivered calibrated?
Yes. The micrometer is supplied fully calibrated with an ISO 17025 calibration certificate issued by Microtech Metrology.
How does the ratchet stop improve measurements?
The ratchet stop ensures a uniform contact pressure for each measurement, improving repeatability and protecting the part surface during use.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools