12-25mm Precision Drill Grinder For HSS And SK Drills 90°–140° Point Angle, 4500rpm, CBN Wheel - Vertex
€2,099.00
Product information "12-25mm Precision Drill Grinder For HSS And SK Drills 90°–140° Point Angle, 4500rpm, CBN Wheel - Vertex"
Benefit from precise re‑sharpening for Ø12–25 mm drills and a robust 230 V / 300 W motor that keeps workshop workflow steady; the unit's CBN grinding wheel and adjustable point angle 90°–140° deliver consistent cutting geometry and longer tool life. Order the VDG-25 directly via Metav Werkzeuge or ask our consultants if needed.
VDG-25 Precision Drill Grinder — re‑sharpens Ø12–25 mm drills, 90°–140° point angle
The VDG-25 is a compact precision drill grinder designed for workshop and small production environments, engineered to re‑sharpen HSS and SK drills within a 12–25 mm diameter range.
- Re-sharpens drills Ø12–25 mm
- Adjustable point angle 90°–140°
- CBN grinding wheel included
- 230 V / 300 W motor, 4,500 rpm
Consistent hole quality through precise geometry control
The drill grinder delivers controlled re‑grinding that restores the original geometry of worn tooling. Using the integrated CBN grinding wheel and the adjustable point angle 90°–140°, the machine re‑establishes accurate lip form and chisel edge, which reduces radial runout and improves hole accuracy. For workshops that depend on repeatable results, this means fewer rejects and more predictable cycle times thanks to unchanged cutting conditions after re‑sharpening.
Faster turnaround and lower tooling costs for production
Equipped with a 230 V / 300 W motor running at 4,500 rpm, the unit provides a stable grinding speed appropriate for high‑quality re‑sharpening of HSS and carbide‑tipped SK drills. The included set of 14 collets covering the Ø12–25 mm range and the collet holder simplify tool changeovers, reducing downtime. By extending drill life with professional re‑conditioning, the grinder cuts consumable spending and supports efficient shift planning in small to medium production runs.
Practical operation, simple maintenance, ready accessories
The machine arrives with all standard accessories required for immediate use: a complete collet set, collet holder, CBN grinding wheel, and an Allen spanner for wheel changes (suitable for SK drills). The compact design and approximately 24 kg weight make installation straightforward on a bench or dedicated station. Routine upkeep is limited to wheel inspection and occasional dressing; the CE certificate documents compliance with applicable safety standards for workshop equipment.
Suited to workshops, tool rooms and maintenance shops
This precision grinder is intended for machinists, maintenance departments and small tool rooms that require consistent drill performance without outsourcing re‑sharpening. The device is particularly effective where a mix of HSS and SK drills must be maintained in‑house and where turnaround time is critical. Its specification supports an in‑house sharpening programme that increases autonomy and responsiveness while preserving cutting performance.
Contact Metav Werkzeuge to discuss how the Vertex VDG-25 can integrate into existing tool maintenance routines and to request tailored advice from our technical consultants.
Technical data
- Article number: VDG-25
- Brand: Vertex
- Product type: Precision drill grinder
- CE certificate included
Facts
- Sharpening range: Ø12–25 mm
- Point angle: 90°–140°
- Speed: 4,500 rpm
- Motor: 230 V / 300 W / 50 Hz
- Weight: 24 kg
Special features
- CBN grinding wheel included
- Accessories: 14 collets Ø12–25 mm
- Collet holder included
- Allen key for wheel change (for SK drills)
- Suitable for HSS and SK drill re‑sharpening
- Compact bench footprint
FAQ
What drill diameters can be re‑sharpened with this machine?
The VDG-25 re‑sharpening unit accepts drills in the Ø12–25 mm range, using the supplied collets to secure each diameter precisely.
Can both HSS and carbide‑tipped drills be processed?
Yes, the grinder is specified for re‑sharpening HSS and SK (carbide‑tipped) drills; the included CBN grinding wheel is suitable for consistent results on both tool types.
How adjustable is the cutting point geometry?
The machine allows point angles from 90° to 140°, enabling adaptation of the lip and chisel geometry to match specific drilling tasks and materials.
Is the VDG-25 suitable for continuous workshop use?
Designed for workshop and small production environments, the VDG-25 features a robust 230 V / 300 W motor and a stable 4,500 rpm grinding speed for repeated sharpening cycles.
Which accessories are supplied with the grinder?
Delivery includes a set of 14 collets covering Ø12–25 mm, a collet holder, CBN grinding wheel, and an Allen spanner for changing the wheel (for SK drills).
Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
| Produktart: | Bohrerschleifmaschine |
|---|
Zubehör
Take advantage of a compact, freestanding storage solution that combines three storage drawers with a padded top area for protected gauges and clamps, helping to streamline workshop workflow. Order the unit directly via Metav Werkzeuge or consult our advisors for integration guidance. VTC-20 freestanding tool cabinet with padded storage — Vertex The VTC-20 is a freestanding tooling rack designed as an accessory for universal knife grinders and general workshop storage. Freestanding tooling rack for workshop flexibility Three storage drawers for organised storage Padded storage area to protect precision gauges Supplied assembled — ready for immediate use Save time with organised, accessible tooling A compact tool cabinet that prioritises efficient tool organisation reduces search time and supports uninterrupted work processes. The VTC-20 provides three storage drawers for separated storage of clamps, jigs and hand tools, while the top compartment with protective pad keeps sensitive gauges and finishing tools cushioned. With clearly defined storage locations, setup and changeover times are shortened, contributing to a steadier production flow and measurable efficiency gains on the shop floor. Small footprint, flexible placement for any bench With a cabinet size of 460 x 370 x 860 mm (W x D x H) and a manageable mass of 30.25 kg, this freestanding rack is suited to confined workshop spaces and versatile positioning. The compact dimensions allow the unit to sit beside grinders, workbenches or finishing stations without consuming excess floor area; the freestanding design eliminates the need for permanent fixtures and enables rapid reorganisation of the workspace as tasks change, supporting agile workshop layouts. Ready-to-use storage that protects precision instruments Delivered supplied assembled, the rack arrives ready to integrate into daily operations, avoiding downtime from on-site setup. The dedicated storage area with protective pad reduces the risk of surface damage to precision instruments and gauges during storage, while the multiple drawers enable separation of delicate measuring tools from heavier accessories. This combination of protective storage and immediate usability supports longer tool life and fewer replacement costs over time. Practical workshop partner from a known brand Designed as a versatile accessory for universal knife grinders, the cabinet complements existing grinding and sharpening equipment with a purpose-built storage solution. Manufactured by Vertex, the unit aligns with workshop needs for durable, straightforward storage that emphasises practicality over complexity. Choosing a compact tooling rack of this kind supports consistent working standards and helps maintain order in environments where accuracy and tool availability matter. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VTC-20 into the workshop; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VTC-20 GTIN: 4061905095115 ECLASS: 21059113 Dimensions & weight Cabinet size: 460 x 370 x 860 mm (W x D x H) Weight: 30.25 kg Features & scope Freestanding tooling rack Three storage drawers Storage area with protective pad Supplied assembled; 1-pack Accessory for universal knife grinders FAQ What is the primary purpose of this tool cabinet? The VTC-20 is intended as a freestanding tooling rack and accessory for universal knife grinders, offering organised storage for clamps, gauges and workshop tools. Are the drawers and top storage suitable for precision gauges? Yes — the VTC-20 includes three storage drawers and a padded top area designed to protect precision gauges and delicate instruments during storage. Is the unit delivered ready for use? The unit is supplied assembled and packaged as a single item, so it is ready for immediate placement and use upon arrival. What are the exact dimensions and weight of the cabinet? Cabinet dimensions are 460 x 370 x 860 mm (W x D x H) and the weight is 30.25 kg. Can the cabinet be positioned anywhere in the workshop? The freestanding design allows flexible placement beside grinders, benches or finishing stations without the need for permanent installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan