6–10mm Internal Micrometer Tungsten Carbide Measuring Faces 0.01mm Graduation, Depth 60mm - Microtech Metrology
€225.00
Product information "6–10mm Internal Micrometer Tungsten Carbide Measuring Faces 0.01mm Graduation, Depth 60mm - Microtech Metrology"
The compact combination of high repeatability and concise measuring range makes this instrument ideal for precision workshop checks; its carbide measuring faces and 0.008 mm accuracy ensure reliable results in small-bore inspections. Order directly via Metav Werkzeuge or consult the Metav team for application support.
Internal Dial Bore Gauge by Microtech Metrology — 6–10 mm, carbide measuring faces
The Internal Dial Bore Gauge is a precision instrument for fast, repeatable internal diameter checks in small bores and fine mechanical applications.
- Carbide measuring faces for wear resistance
- Measuring range 6–10 mm for small-bore work
- 0.01 mm resolution on an analogue dial
- Measuring depth 60 mm for recessed checks
Accuracy that stabilises quality control processes
The instrument delivers 0.008 mm accuracy, supported by an analogue dial with 0.01 mm resolution, which makes it suitable for high‑precision incoming inspections and short‑run quality checks. Classified in the Micro measurement class (max. range up to 10 mm), this gauge offers the stiffness and control required for small components where even minor deviations matter. The numerical accuracy figures allow statistical traceability and straightforward inclusion in measurement reports.
Repeatable inside measurements with durable contact faces
Equipped with carbide measuring faces, the gauge maintains geometry and repeatability under frequent use, reducing downtime for tool replacement. The measuring depth of 60 mm permits checks in recessed bores and socketed components without auxiliary extensions. As an analogue instrument, the dial provides an immediate visual readout for rapid decision‑making on the shop floor while supporting documented tolerance checks for process control.
Compact handling and simple maintenance for production workflows
The compact design supports ergonomic handling during one‑handed measurements and minimises measurement force variation, which helps achieve consistent results across operators. Maintenance is limited to cleaning and occasional lubrication of the contact mechanism; the carbide tips resist abrasion, extending service intervals. Combined with clear numerical performance data, this instrument integrates into regular inspection routines and supports reproducible acceptance criteria.
For precise small‑bore inspection tasks, choose the Microtech Metrology internal dial bore gauge and contact Metav Werkzeuge for tailored supply and technical advice from Emmerich.
Technical Data
- Article number: 132010100
- GTIN: 4061905453359
- Brand: Microtech Metrology
- Type: internal dial bore gauge
Facts
- Measuring range: 6–10 mm
- Resolution (dial): 0.01 mm
- Stated accuracy: 0.008 mm
- Measuring depth: 60 mm
- Display: analogue
Special features
- Carbide measuring faces
- Analogue dial readout
- Classified as Micro (compact, high‑precision)
FAQ
How precise is the gauge for small internal diameters?
The Internal Dial Bore Gauge offers a stated accuracy of 0.008 mm with a 0.01 mm dial resolution, making it suitable for fine internal diameter checks in precision workshop and quality‑control settings.
What measuring range does the instrument cover?
This gauge covers a 6–10 mm measuring range, designed for small‑bore applications typical in micro‑mechanics and fine assembly.
Are the measuring faces durable for frequent use?
Yes, the carbide measuring faces resist wear and extend the service life of the instrument, supporting repeated measurements without rapid degradation of contact geometry.
Can recessed bores be inspected with this tool?
The 60 mm measuring depth allows measurement in recessed or slightly deep bores without the need for additional extensions.
Is this an analogue or digital instrument?
This is an analogue dial instrument with 0.01 mm resolution, providing immediate visual feedback for quick go/no‑go decisions.
Which SKU should be ordered for this gauge?
Order SKU 132010100 for the Microtech Metrology internal dial bore gauge described here
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools