6–10mm Internal Fine Bore Gauge With Carbide Measuring Faces, 0.003mm Accuracy - Microtech Metrology
€425.00
Product information "6–10mm Internal Fine Bore Gauge With Carbide Measuring Faces, 0.003mm Accuracy - Microtech Metrology"
Combining compact design, carbide measuring faces and 0.003 mm accuracy ensures reliable internal measurements of small bores; order the gauge directly via Metav Werkzeuge or consult our advisors for application-specific guidance.
Internal Fine Measuring Gauge — Microtech Metrology · Carbide faces · 0.003 mm accuracy
The Internal Fine Measuring Gauge is an analogue instrument for precise internal bore measurement, designed for confined components and workshop use.
- Carbide measuring faces
- Resolution 0.001 mm
- Accuracy 0.003 mm
- Measuring depth 60 mm
Precision that suits the smallest bores
This gauge delivers measurable confidence where space is limited: with a measuring range of 6–10 mm and an accuracy of 0.003 mm, the instrument is intended for precision internal measurements in fine mechanical assemblies. The 0.001 mm resolution of the dial allows close reading of dimensional changes and supports quality checks during setup and production. Described by classification as micro class equipment (measuring ranges up to 10–100 mm), it combines the reach required for tiny bores with the stiffness and repeatability demanded in toolmaking and micro‑mechanics.
Durable contact surfaces and sufficient reach
The measuring faces are made of carbide, which resists wear and preserves the contact geometry over repeated measurements. A measuring depth of 60 mm gives access to moderately deep bores and recesses while keeping the tool compact and easy to handle. The hardened faces reduce rolling and deformation under contact pressure, improving repeatability and extending service life in a workshop environment where durability and low maintenance are priorities.
Easy handling for consistent results
As an analogue instrument with mechanical dial indication, the gauge offers a tactile, low‑complexity workflow that avoids battery dependence and simplifies traceability in routine checks. The instrument’s form factor supports stable positioning within narrow bores, and the clear mechanical dial with 0.001 mm increments provides immediate, readable feedback. This straightforward operation helps reduce operator variation and speeds up inspection cycles — a rational advantage for shops focused on throughput and reproducible quality control.
Where this gauge brings value in the workshop
Ideal for fine engineering, watch and instrument making, small hydraulic or pneumatic components, and precision toolrooms, the gauge is built to measure internal diameters where standard calipers cannot. Its combination of compact geometry, carbide measuring faces and fine resolution makes it suitable for incoming inspection, set‑up verification and short‑run quality control. The clear mechanical readout supports quick decisions on the shop floor, while the robust contact surfaces lower the lifetime cost by reducing wear‑related drift.
For tailored application advice or to secure this Microtech internal gauge (SKU 132010800) with proven 0.003 mm accuracy, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- SKU: 132010800
- GTIN: 4061905453366
- Brand: Microtech Metrology
- Category: Fine measuring instruments
Facts
- Measuring range: 6–10 mm
- Measuring depth: 60 mm
- Accuracy: 0.003 mm
- Resolution (dial): 0.001 mm
- Analogue: yes
Special features
- Carbide measuring faces
- Classification: Micro class (measuring range up to 10–100 mm)
- Designed for internal bore measurement of small components
FAQ
What measuring range does the gauge cover?
The Internal Fine Measuring Gauge covers a measuring range of 6–10 mm (SKU 132010800), suited to small internal bores.
What accuracy and resolution can be expected?
The instrument specifies an accuracy of 0.003 mm and a dial resolution of 0.001 mm for fine incremental readings.
Are the measuring faces wear‑resistant?
Yes — the gauge features carbide measuring faces, improving durability and dimensional stability under repeated use.
Is this an analogue or digital device?
This product is an analogue gauge with a mechanical dial readout providing 0.001 mm increments.
Which applications are best suited to this instrument?
The gauge is particularly useful for fine engineering, watch and instrument making, toolroom checks and any application requiring precise internal measurements of small components.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools