50-160mm Internal Micrometer With Carbide Measuring Faces 0.015mm Accuracy, 2000mm Depth Stop - Microtech Metrology
€910.00
Product information "50-160mm Internal Micrometer With Carbide Measuring Faces 0.015mm Accuracy, 2000mm Depth Stop - Microtech Metrology"
Precise internal measurements become repeatable with a 0.01 mm reading and carbide measuring faces across a 50–160 mm range; the combination of fine resolution and robust contact surfaces supports consistent workshop and laboratory inspection. Order the internal precision gauge directly via Metav Werkzeuge or consult our specialists for application advice.
Internal Precision Gauge — analogue, 0.01 mm resolution (Microtech Metrology)
Internal Precision Gauge for accurate internal diameter and bore measurements in workshop and inspection environments
- Analogue dial with 0.01 mm graduation
- Carbide measuring faces for abrasion resistance
- Measurement range 50–160 mm
- Accuracy ±0.015 mm for reliable readings
Reliable readings where tolerances matter
The analogue dial with a 0.01 mm graduation provides a clear, immediate indication of small deviations, while the instrument’s accuracy of ±0.015 mm ensures measurements that are suitable for standard quality control tasks. The device’s construction places emphasis on repeatability: carbide measuring faces resist wear and maintain contact geometry over many cycles, reducing drift in bore measurements. This makes the instrument a pragmatic choice when reproducible internal dimensions are required without the complexity of electronic data systems.
Built for everyday workshop and inspection use
Designed for routine use in both workshops and inspection benches, the gauge balances stiffness and handling within its 50–160 mm measuring span. The analogue nature simplifies operation under shop conditions and reduces dependency on batteries or electronics, supporting uninterrupted measurement cycles. The robust contact surfaces and clear dial also shorten setup time, letting production or inspection staff stay focused on throughput and quality — a practical advantage during batch checks or incoming inspections.
Practical interpretation and integration
Interpreting the scale and assessing conformity is straightforward: the 0.01 mm graduation delivers practical resolution for common machining tolerances, and the stated ±0.015 mm accuracy gives a clear error band for pass/fail decisions during inspection. The gauge is suitable for use alongside conventional inspection procedures and can be incorporated into documentation routines by recording dial readings directly or by transcribing values into quality logs. For operators seeking minimal complexity with reliable precision, this analogue instrument is a solid tool for bore and internal diameter control.
For traceable, workshop-ready internal measurement choose Microtech Metrology instruments — contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply from our European quality hub.
Basic data
- Article number: 132160144
- GTIN/EAN: 4061905453878
- Manufacturer: Microtech Metrology
Measurements and accuracy
- Measurement range: 50–160 mm
- Resolution: 0.01 mm
- Accuracy: ±0.015 mm
- Measuring depth: 2000 mm
Features and materials
- Analogue dial display
- Carbide measuring faces
- Category: Precision measuring instrument
- Suitable for workshop and laboratory inspection
FAQ
What measurement range does the instrument cover?
The instrument covers a measurement range of 50–160 mm, allowing internal diameter inspection across a broad span of common workshop components.
What is the display resolution and accuracy?
The analogue dial shows a 0.01 mm graduation and the device delivers an accuracy of ±0.015 mm, suitable for routine quality control and production checks.
What are the measuring faces made from?
The measuring faces are manufactured from carbide, providing high abrasion resistance and stable contact geometry for repeatable internal measurements.
Can this gauge be used in both workshop and laboratory settings?
Yes — the gauge is designed for reliable use in workshop environments and inspection benches, combining robust materials with clear analogue indication for practical integration into inspection routines.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools