400-1000mm Internal Dial Bore Gauge With Carbide Measuring Faces, 0.03mm Accuracy - Microtech Metrology
€820.00
Product information "400-1000mm Internal Dial Bore Gauge With Carbide Measuring Faces, 0.03mm Accuracy - Microtech Metrology"
Take advantage of a wide 400–1,000 mm measuring range, carbide measuring faces and an analogue dial with 0.01 mm graduations for dependable bore inspection. Benefit from robust construction and clear readout for consistent workshop results — order the instrument directly via Metav Werkzeuge or ask our consultants if needed.
Internal Precision Bore Gauge — 400–1,000 mm range, carbide measuring faces (Microtech Metrology)
The Internal Precision Bore Gauge is an analogue internal measuring instrument designed for precise inspection of large bores and deep internal diameters in heavy machining environments
- Large measuring range 400–1,000 mm
- Carbide measuring faces for wear resistance
- Analogue dial with 0.01 mm graduations
- 440 mm measuring depth for deep bores
Confident tolerance control for large components
The gauge delivers a clear measurement solution where long-range precision matters: with a resolution of 0.01 mm on an analogue dial and a stated accuracy of ±0.03 mm, the instrument enables reliable decision-making during incoming inspection and shop‑floor checks. This level of performance is particularly suited to applications that require repeatable diameter verification over large components; the numerical specification provides a concrete basis for tolerance planning and process control.
Built to withstand regular workshop use
Wear-critical contact surfaces are equipped with carbide measuring faces, providing enhanced abrasion resistance and longer intervals between servicing. The mechanical design focuses on stability and repeatability, so readings remain consistent across repeated measurements. For production environments where instrument longevity directly affects uptime, the robust contact geometry reduces the risk of surface damage and measurement drift, supporting uninterrupted inspection routines.
Practical reach and handling for deep bores
With a measuring depth of 440 mm and an overall range of 400–1,000 mm, the gauge is classified for the longer-bar segment, making it suitable for large housings, pipes and cylinder liners that require internal verification. The instrument balances reach and manageability so that deep-diameter checks remain practical without sacrificing rigidity. Simple analogue operation reduces dependency on batteries and electronics, supporting straightforward adoption in busy workshops while maintaining the precision expected from a Microtech Metrology instrument.
Contact Metav Werkzeuge for a tailored quotation or to discuss how Microtech Metrology’s internal precision gauge can be integrated into current inspection routines
Technical Data
- Article number: 132900100
- GTIN: 4061905454028
- Manufacturer: Microtech Metrology
Core measurements
- Measuring range: 400–1,000 mm
- Resolution / reading: 0.01 mm
- Accuracy: ±0.03 mm
- Measuring depth: 440 mm
Special features
- Analogue dial indicator
- Carbide measuring faces
- Analog instrument (mechanical)
FAQ
What measurement range does the instrument cover?
The instrument covers a measuring range of 400–1,000 mm, designed for large internal diameters and deep-bore checks.
How fine is the readable graduation and what is the stated accuracy?
Readout is 0.01 mm per division on the analogue dial; the declared accuracy is ±0.03 mm for routine workshop verification.
Are the contact faces suitable for heavy use?
Yes, the contact surfaces are fitted with carbide measuring faces, offering enhanced wear resistance for frequent measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools