1000mm Internal Micrometer Carbide Measuring Faces 0.03mm Accuracy, 1000mm Depth - Microtech Metrology
€1,450.00
Product information "1000mm Internal Micrometer Carbide Measuring Faces 0.03mm Accuracy, 1000mm Depth - Microtech Metrology"
Take advantage of the combination of a 400–1000 mm working range, ±0.03 mm accuracy and carbide measuring faces for dependable bore inspection of large components; order this instrument directly via Metav Werkzeuge or consult our specialists for application advice.
Internal Precision Gauge — Dial bore gauge for 400–1000 mm with carbide measuring faces (Microtech Metrology)
The Internal Precision Gauge is an analogue dial bore gauge designed for reproducible internal measurements of large bores in workshop and production environments.
- Large range 400–1000 mm
- Resolution 0.01 mm dial reading
- Carbide measuring faces for wear resistance
- Accuracy ±0.03 mm for consistent results
Precise measurement for large bores that reduces rework
This analogue instrument combines a broad measuring span with a fine reading, making it suitable where reproducibility and clear decision limits matter. The 400–1000 mm measurement window and a dial graduation of 0.01 mm allow rapid assessment of large internal diameters while keeping handling straightforward. With an indicated accuracy of ±0.03 mm, the device supports quality control steps that prevent costly rework and scrap by making out-of-tolerance conditions immediately visible. The analogue display gives immediate visual feedback, which speeds up serial inspection and supports lean production routines.
Robust design and durable measuring faces for industrial use
Durability is central for gauges that are used on shop floors. The instrument is fitted with carbide measuring faces, which resist wear during repeated contact and provide a stable measuring interface over prolonged use. The construction and hardened contact surfaces ensure unchanged geometry even after many measuring cycles, improving long-term repeatability. Because the depth capability is extended to 1000 mm, the gauge handles deep bores and long sleeves without compromising measurement integrity, so large assemblies can be checked with confidence.
Easy integration into workshop routines and traceable quality control
Handling and set‑up have been optimised for practical workshop use: the analogue dial indicator is intuitive to read and allows quick go/no‑go decisions. The instrument is classified for the large‑range internal measurement segment (suitable where profile stiffness and reach are critical), making it a pragmatic choice for maintenance, jigs and fixture checks, and incoming inspection of bulky parts. For procurement and process planning, Metav’s experience as a precision distributor provides an additional quality filter and supply reliability that supports uninterrupted production.
Discuss specific applications with Metav Werkzeuge—our experts in Emmerich will advise on fitting this Microtech Metrology internal gauge into existing inspection routines and arrange prompt delivery; call +49 2822 7131930 or email info@metav-werkzeuge.com
Technical data
- Article number: 132900122
- GTIN: 4061905454035
- Manufacturer: Microtech Metrology
Core specifications
- Measuring range: 400–1000 mm
- Measuring depth: 1000 mm
- Reading / Resolution: 0.01 mm
- Accuracy: ±0.03 mm
Features and materials
- Analogue dial indicator
- Carbide measuring faces
- Category: Fine measuring instrument — internal gauge
- Image reference available
FAQ
What is the measurement range and suitability for large bores?
The instrument covers 400–1000 mm and is designed specifically for large internal diameters where reach and profile rigidity are required.
What resolution and accuracy does the gauge provide?
The analogue dial shows a 0.01 mm graduation and the device offers an accuracy of ±0.03 mm, suitable for routine industrial inspection.
Are the measuring faces wear-resistant?
Yes — the gauge comes with carbide measuring faces, providing high wear resistance and stable contact geometry for repeated measurements.
Is this instrument suitable for deep internal measurements?
The design supports a measuring depth of 1000 mm, making it appropriate for deep bores, sleeves and long housings.
Which manufacturer and article number identify this product?
This internal gauge is supplied by Microtech Metrology; article number 132900122 and GTIN 4061905454035 identify the exact model.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools