1000mm Internal Micrometer Set With Carbide Faces, 0.01mm Resolution - Microtech Metrology
€1,690.00
Product information "1000mm Internal Micrometer Set With Carbide Faces, 0.01mm Resolution - Microtech Metrology"
The combination of a 6–1000 mm measurement range, hardened carbide measuring faces and a repeatable ±0.03 mm accuracy delivers reliable internal measurements across small bores and large cavities; the analogue dial readout with 0.01 mm resolution supports fast decisions on the shop floor. Order the instrument set directly via Metav Werkzeuge or contact our consultants for specification matching and delivery from Emmerich.
Microtech Metrology Internal bore gauge set – 6–1000 mm, carbide faces
The Internal fine measuring instrument set provides a rugged, analogue solution for precise internal diameter checks across workshops and production environments, suitable for bores, cylinders and cavity inspection.
- Wide coverage 6–1000 mm range
- Carbide measuring faces for long life
- Analogue dial with 0.01 mm resolution
Accurate internal checks that speed up quality decisions
The set has been designed for reproducible internal measurements across a broad span of diameters. With an indicated accuracy of 0.03 mm and a dial resolution of 0.01 mm, the instrument provides clear, incremental readings that support rapid go/no‑go assessments during incoming inspection or inline sampling. The analogue display avoids software dependencies and enables immediate interpretation; this reduces cycle time at the inspection station while maintaining documented repeatability for part acceptance.
Built for durability and repeatable contact quality
Hardened carbide measuring faces give the contact geometry resistance to wear and maintain measurement integrity under frequent use. The mechanical construction prioritises stable contact and low hysteresis so results remain consistent across batches. For applications where surface hardness varies, the carbide tips help protect the sensing surface and extend service intervals, resulting in lower lifecycle cost compared with non‑hardened contacts.
Practical set configuration for flexible workshop use
Delivered as a set covering 6–1000 mm, the kit suits a wide mix of small to large bores without the need for multiple specialised tools. The instruments are analogue and mechanically intuitive, reducing training time for operators who require dependable, hands‑on gauges rather than networked metrology. The measured depth range of 60–2000 mm allows access to deep cavities and stepped bores, broadening the set’s applicability from maintenance tasks to production sampling.
Clear benefits for production and inspection workflows
Choosing this gauge set brings two principal advantages: swift, on‑the‑spot inspection decisions and durable contact performance for high‑volume cycles. The straightforward mechanical readout minimises interpretation errors and the robust tip material keeps calibration drift low over long intervals. For users seeking a pragmatic balance of range and resilience, the combination of wide measuring span and carbide tips offers a dependable inspection backbone without complex electronics.
For a detailed technical match to an application or to secure supply from our Emmerich hub, contact Metav Werkzeuge to discuss the Microtech Metrology internal bore gauge set and delivery options.
Technical data
- Article number: 132990105
- GTIN: 4061905454158
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 6–1000 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Measuring depth: 60–2000 mm
Special features
- Analogue dial readout
- Carbide measuring faces
- Supplied as a set
FAQ
What range does the set cover?
The Microtech Metrology internal bore gauge set covers diameters from 6 to 1000 mm, offering flexible coverage for small bores up to larger cavities.
How precise are the measurements with this instrument?
The instrument provides a reading resolution of 0.01 mm and an overall accuracy of ±0.03 mm, enabling reliable tolerance checks for standard workshop inspection.
Are the measuring faces durable for production use?
Yes, the gauges feature hardened carbide measuring faces that resist wear and help maintain consistent contact geometry during repeated measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools