10mm Thickness Gauge Dial Indicator, 0.01mm Resolution, 120mm Depth, ISO 17025 Calibrated - Microtech Metrology
€159.00
Product information "10mm Thickness Gauge Dial Indicator, 0.01mm Resolution, 120mm Depth, ISO 17025 Calibrated - Microtech Metrology"
The combination of verified traceability, fine resolution and compact design makes this thickness gauge a reliable choice for routine production checks and laboratory use. Supplied fully calibrated to ISO 17025, the instrument delivers measurable confidence for inspection protocols; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice.
Thickness gauge with dial indicator — compact analogue instrument, calibrated to ISO 17025
The Thickness gauge with dial indicator is a compact, analogue measuring instrument for precise thickness checks up to 0–10 mm, designed for workshop and laboratory use with a 120 mm measuring depth.
- ISO 17025 calibrated delivery
- 0.01 mm dial resolution
- Measuring range 0–10 mm
- 120 mm measuring depth
Precision where measurement certainty matters
This analogue thickness gauge combines a readable dial indicator with a fine display resolution of 0.01 mm, enabling repeatable thickness checks on thin materials and small components. The instrument’s stated accuracy ±0.03 mm positions it within a reliable tolerance band for quality-control tasks where clear pass/fail criteria are required. The mechanical dial avoids electronic drift and provides immediate visual feedback during fast inspection cycles, while the compact construction keeps thermal and handling effects low, supporting consistent results across multiple operators.
Calibrated traceability and workshop readiness
Supplied fully calibrated to ISO 17025, the device includes an official calibration certificate, ensuring traceability for internal audits and supplier quality documentation. The Microtech Metrology build is tuned for routine use: a robust housing, clearly graduated dial and straightforward mounting make the instrument suitable for bench-top verification or in-line spot checks. Inclusion of the calibration certificate simplifies quality management procedures and reduces administrative effort when integrating the gauge into established inspection plans.
Practical efficiency for everyday quality control
With a measuring range of 0–10 mm and a 120 mm measuring depth, this gauge addresses common thickness verification tasks for film, foil, gasket and small components without cumbersome setup. The analogue mechanism supports rapid, tactile measurement sequences and immediate decision-making on the shop floor, improving throughput in repetitive test programmes. The instrument’s durable design and simple operation reduce training time and downtime, helping teams maintain consistent inspection throughput while preserving measurement integrity.
For specification confirmation or to request the ISO 17025 certificate and delivery options, contact Metav Werkzeuge for tailored advice and swift handling of your order.
Technical Data
- Article number: 137010121
- GTIN: 4061905044670
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–10 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Measuring depth: 120 mm
- Display type: analogue dial indicator
Special features
- Supplied calibrated to ISO 17025 with certificate
- Robust analogue construction for workshop use
- Compact format for bench and lab applications
- Intended for industrial metrology & scales tasks
FAQ
Is the instrument supplied with a calibration certificate?
Yes. The thickness gauge is delivered fully calibrated to ISO 17025, and the calibration certificate is included with the instrument.
What is the smallest increment visible on the dial?
The dial indicator provides a resolution of 0.01 mm, allowing fine discrimination for routine thickness checks.
Can this gauge handle measurements beyond 10 mm?
No. This model is specified for a 0–10 mm measuring range; for larger components a different instrument with greater range is recommended.
How repeatable are the readings in daily operation?
With an accuracy of ±0.03 mm and a stable analogue dial mechanism, the gauge offers consistent repeatability for standard workshop inspections.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools