10mm Thickness Gauge Digital 0.01mm Resolution, Ø10mm Measuring Faces, ISO 23529-A/ASTM D3767-03-A - Microtech Metrology
€699.00
Product information "10mm Thickness Gauge Digital 0.01mm Resolution, Ø10mm Measuring Faces, ISO 23529-A/ASTM D3767-03-A - Microtech Metrology"
Take advantage of a compact instrument that pairs digital high resolution with a low contact force for reliable thickness measurement of soft materials; the combination of 0–10 mm range, 0.001 mm display resolution and conformity to recognised test standards streamlines quality checks. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for application advice.
Thickness Gauge — digital, 0–10 mm measuring range (Microtech Metrology)
The Thickness Gauge is a compact digital instrument designed for precise thickness measurement of soft materials in laboratory and workshop environments, offering a fine measuring range and low contact pressure for reproducible results.
- Digital readout with 0.001 mm resolution
- Compact 0–10 mm measuring range
- Ø10 mm measuring faces for low deformation
- Compliant with ISO 23529-A and ASTM D3767-03-A
Accurate digital readings that speed up inspection workflows
The instrument delivers high-resolution digital readings on a fast display, making routine checks both quicker and more consistent than manual methods. With a 0.001 mm display resolution combined with an indicated 0.01 mm accuracy, this measuring device reduces uncertainty in pass/fail decisions and shortens inspection cycles. The electronic readout eliminates interpretation errors from analogue dials, supporting traceable documentation and faster reporting in production or R&D environments.
Gentle contact design protects delicate samples and improves repeatability
A controlled measuring force of 0.8 ±0.16 N and broad Ø10 mm measuring faces minimise local deformation when testing rubbers, elastomers and other soft materials, preserving sample geometry during measurement. This low-force concept is particularly valuable for materials below 35 IRHD, where even small compressive loads cause significant thickness variance. The result is repeatable thickness values with reduced operator influence, which is crucial when comparing batches or validating material properties.
Standards conformity and compact range match small-part testing needs
Conformity with ISO 23529‑A / ASTM D3767‑03‑A ensures that measurement procedures align with common material test protocols, making results comparable across laboratories and suppliers. The 0–10 mm range positions this instrument for micro-sample tasks—sheets, seals, gaskets and thin profiles—where precise short-range measurement is required. Built as a digital measurement instrument from Microtech Metrology, it integrates well into bench-top quality control workflows and supports systematic product validation.
Contact Metav Werkzeuge for tailored advice or to secure Microtech Metrology’s digital thickness gauge; reach the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 137331212
- GTIN: 4061905454288
- Manufacturer: Microtech Metrology
- Category: Dial gauges (Messuhren)
Facts
- Measuring range: 0–10 mm
- Resolution (display): 0.001 mm
- Indicated accuracy: 0.01 mm
- Measuring faces: Ø10 mm
- Measuring force: 0.8 ±0.16 N
- eCl@ss: 21170535
Special features
- Standards: ISO 23529‑A / ASTM D3767‑03‑A
- Suitable for: rubber and elastomer <35 IRHD
- Without timer
- Digital instrument for small-part thickness testing
FAQ
What sample types are suitable for this gauge?
The instrument is designed primarily for soft materials such as rubber and elastomers below 35 IRHD; the Thickness Gauge from Microtech Metrology provides low‑force contact and broad measuring faces to avoid sample compression.
What measurement resolution and accuracy can be expected?
The digital readout shows 0.001 mm increments with an indicated accuracy around 0.01 mm, suitable for high‑precision thickness checks in small ranges.
Does the gauge meet recognised testing standards?
Yes — the device conforms to ISO 23529‑A and ASTM D3767‑03‑A, supporting standardised test procedures and comparable results across laboratories.
Is this instrument suitable for very thin films and seals?
The 0–10 mm range and gentle measuring force make it well matched to thin sheets, seals and film-like materials where minimal deformation is essential.
Which SKU identifies this item for ordering?
The product is listed under SKU 137331212 and is supplied by Microtech Metrology; use this reference when enquiring via Metav Werkzeuge.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools