70-160mm Inside Micrometer Digital Retractable Anvil 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology
€2,490.00
Product information "70-160mm Inside Micrometer Digital Retractable Anvil 0.001mm Resolution ISO 17025 Calibrated - Microtech Metrology"
Compact precision, traceable calibration and a wide measuring depth combine to make this digital internal gauge a dependable choice for inspection benches and production lines; its 0.001 mm resolution and ISO 17025 calibration certificate ensure repeatable results. Order via Metav Werkzeuge or consult our specialists for application guidance.
Internal Fine Measuring Instrument — digital bore gauge, 70–160 mm range, high resolution
A Internal Fine Measuring Instrument designed for precise internal diameter inspection in workshops and metrology labs; suitable where repeatable, traceable bore measurement is required.
- Digital readout with 0.001 mm resolution
- Measurement range 70–160 mm
- ISO 17025 calibration certificate included
- Measuring depth up to 2000 mm
Precision where it matters: consistent, measurable results
The instrument delivers a resolution of 0.001 mm and a stated accuracy of ±0.03 mm, translating into fine control over tolerance verification and dimensional inspection. The digital readout reduces interpretation errors compared with analogue scales and documents minute changes across serial production. For process control, the combination of high resolution and a wide measurement range (70–160 mm) shortens inspection cycles and supports faster decision-making on the shop floor. Technical terms: resolution refers to the smallest increment the display shows; accuracy indicates the maximum expected deviation from the true value.
Practical operation: designed for efficient inspection workflows
Compact and straightforward, the gauge fits inspection benches and portable measurement rigs alike. The instrument’s digital output and stable mechanical guidance reduce rework caused by inconsistent manual readings, improving throughput. Where access or depth is a concern, the measuring depth of 2000 mm enables measurements in deeper bores or assemblies without improvised extensions. Built features that simplify handling translate into fewer interruptions during routine quality checks and a clearer audit trail for compliance documentation.
Traceability and quality assurance for regulated environments
Calibrated to ISO 17025, the device is supplied with a traceable calibration certificate, meeting laboratory and supplier quality system requirements. This formal calibration ensures measurement results can be relied upon in contractual inspections and internal quality control. The gauge is categorised among fine measuring instruments for internal diameters and is suitable for integration into quality assurance routines where documented measurement uncertainty and traceability are obligatory. The brand reputation supports confidence in long-term reproducibility.
Choose the ISO 17025‑calibrated Microtech Metrology internal gauge via Metav Werkzeuge for traceable precision — our Emmerich team can advise on integration and specification matching.
Technical data
- Article number: 139160822
- GTIN: 4061905045851
- Manufacturer: Microtech Metrology
Data
- Measurement range: 70–160 mm
- Resolution: 0.001 mm
- Accuracy: ±0.03 mm
- Measuring depth: 2000 mm
Special features
- Digital readout
- ISO 17025 calibration certificate included
- Category: Fine measuring instruments
FAQ
What resolution does the instrument provide?
The digital readout on the Internal Fine Measuring Instrument provides a resolution of 0.001 mm, enabling micrometre‑level differentiation for internal diameter checks.
Is a calibration certificate supplied?
Yes — the device is delivered with an ISO 17025 calibration certificate, ensuring traceable measurement results suitable for laboratory and contractual use.
What measurement range is covered by this gauge?
The instrument covers a measurement range of 70–160 mm, making it suitable for many small to medium bore inspection tasks.
Can the gauge be used for deep bores or assemblies?
Yes; the specified measuring depth of 2000 mm supports measurements in deeper components and assemblies without improvised extensions.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools