720-1020mm Internal Precision Bore Gauge With Retractable Probe, ISO 17025 Calibrated - Microtech Metrology
€2,990.00
Product information "720-1020mm Internal Precision Bore Gauge With Retractable Probe, ISO 17025 Calibrated - Microtech Metrology"
With an ISO 17025 calibration and a 720–1020 mm measuring range, this digital internal bore gauge delivers certified traceability and consistent large‑bore checks; combine 0.035 mm accuracy with a fine 0.001 mm resolution for dependable production control and order the instrument directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance.
Internal Precision Bore Gauge (digital) — 720–1020 mm range, ISO 17025 calibrated, Microtech Metrology
The Internal Precision Bore Gauge (digital) is a calibrated instrument for accurate internal diameter measurement of large bores in machine construction, jig and fixture work, and component inspection.
Digital readout with 0.001 mm resolution
Measuring range 720–1020 mm
400 mm measuring depth
Delivered calibrated to ISO 17025
Certified accuracy that supports production decisions
The instrument offers a combination of certified measurement confidence and practical resolution: the ISO 17025 calibration and supplied calibration certificate document traceability, while the 0.035 mm accuracy and 0.001 mm resolution ensure results suitable for quality control and final inspection stages. This level of verification reduces doubt in measurement records and helps to avoid costly rework by providing repeatable values for acceptance tests and statistical process control.
Large‑bore capability with workshop handling in mind
Designed for internal diameters from 720 to 1020 mm with a 400 mm effective measuring depth, the device addresses the needs of production departments that handle sizeable housings, sleeves or bearing bores. Classified in the long‑range internal category, the instrument balances reach with handling practicality so that teams can carry out reproducible checks without resorting to customised setups. The digital readout simplifies interpretation and shortens inspection cycles, supporting faster throughput on the shop floor.
Practical integration into industrial metrology workflows
As a digital precision instrument from Microtech Metrology, this gauge fits established metrology processes and documentation routines. The calibrated output and readable values allow straightforward logging into inspection reports; traceable measurements support supplier chains and audit requirements. Metav’s role as a precision partner further complements the tool: the company supplies certified instruments and offers advice on measurement strategy, promoting consistent metrology across the workshop and production line.
Contact Metav Werkzeuge to request a quotation or application advice for Microtech Metrology gauges; certified ISO 17025 instruments and calibration certificates are available from our Emmerich site
Technical data
- Article number: 139910800
- GTIN: 4061905454264
- Manufacturer: Microtech Metrology
- Digital: yes
- SKU: 139910800
Facts
- Measuring range: 720–1020 mm
- Measuring range (max): 1020 mm
- Measuring range (min): 720 mm
- Measuring depth: 400 mm
- Readout resolution: 0.001 mm
- Accuracy: 0.035 mm
Special features
- Delivered with ISO 17025 calibration certificate
- Digital internal bore measurement
- Classification: Long (1,000–2,000 mm range)
- Category: precision measuring instruments
FAQ
What accuracy can be expected from this internal gauge?
The gauge provides an accuracy of 0.035 mm and a display resolution of 0.001 mm, enabling repeatable inspection data for large‑bore checks.
Is the instrument supplied with a calibration certificate?
Yes, the device is delivered calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability.
Which diameter range does the instrument cover?
The measuring range covers internal diameters from 720 mm up to 1020 mm with a measuring depth of 400 mm.
Can this digital gauge be used in a production environment for routine checks?
Yes, the digital readout and certified calibration make it suitable for routine inspection and production control in machine shops and fixture manufacturing.
Who manufactures this instrument and what is the SKU?
The instrument is manufactured by Microtech Metrology and sold under SKU 139910800.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools