300mm Precision Digital Caliper With 60/40 Dual Jaws, 0.01mm Resolution, IP67, ISO 17025 Calibrated - Microtech Metrology
€339.00
Product information "300mm Precision Digital Caliper With 60/40 Dual Jaws, 0.01mm Resolution, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of high-resolution measurement (0.01 mm) combined with a robust IP67 enclosure and ISO 17025 traceable calibration for reliable quality control on the shop floor; order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed.
Precision Caliper — Digital 0–300 mm with IP67 and ISO 17025
The Precision Caliper is a digital measuring instrument designed for standard workshop use in metalworking and machine assembly, offering protected operation and traceable calibration for consistent results.
- Swiss Digital display, 11 mm height
- IP67 dust and water protection
- ISO 17025 calibrated with certificate
- Measuring range 0–300 mm, 0.03 mm accuracy
Consistent results for production and inspection
The instrument delivers repeatable measurements thanks to a 0.01 mm display resolution and an accuracy of ±0.03 mm, making it suitable for routine quality checks and machining verification. The clear Swiss Digital readout, with an 11 mm-high digit row, reduces interpretation errors and speeds up data capture on the production line. Where documentation and traceability matter, the combination of fine resolution and guaranteed accuracy provides a rational basis for process decisions and reduces rework rates.
Built to withstand the workshop
A sealed housing rated IP67 protects the electronics from dust and immersion, enabling reliable operation in harsher environments such as coolants‑sprayed benches or oily workstations. The asymmetric jaw geometry (60/40 mm) improves access to narrow grooves and deeper bores without compromising clamping stability. With a measuring span of 0–300 mm, the caliper sits in the standard category for machine and metalworking tasks, delivering an optimal balance between reach and rigidity for everyday workshop requirements.
Traceable calibration and efficient handling
Delivered fully calibrated to ISO 17025, the tool comes with an official calibration certificate, ensuring measurement traceability for internal audits and external compliance. The durable digital format simplifies reading and shortens inspection cycles, while the compact profile supports one-handed operation. For procurement and inventory control the device is available from Metav Werkzeuge, whose distribution hub in Emmerich acts as a quality filter for European workshops and small production facilities.
For traceable precision and workshop-ready robustness from Microtech Metrology, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich.
Technical Data
- Article number: 141072323
- GTIN: 4061905037269
- Brand: Microtech Metrology
Facts
- Measuring range: 0–300 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Display height: 11 mm
- Jaw length: 60/40 mm
Special features
- Digital display: Swiss Digital
- Protection class: IP67
- Delivered calibrated to ISO 17025 with certificate
- Standard workshop category for machine and metalworking
FAQ
Is the caliper supplied with a calibration certificate?
The Precision Caliper from Microtech Metrology (Article 141072323) is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes.
What resolution and accuracy can be expected?
The digital readout provides a resolution of 0.01 mm and an accuracy of ±0.03 mm across the 0–300 mm range, making it suitable for standard quality control and measurement tasks.
Can the instrument be used in damp or oily environments?
Yes — the caliper features an IP67 rating, which protects it against dust ingress and temporary immersion, improving reliability in workshop conditions.
For which applications is this caliper intended?
With a 0–300 mm measuring range and robust construction, the caliper is classified in the standard category and is ideal for general machine‑shop, metalworking and assembly measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.