300mm Precision Caliper Digital 0.01mm Resolution, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
€339.00
Product information "300mm Precision Caliper Digital 0.01mm Resolution, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology"
Consistent measurement force, robust ingress protection and traceable calibration combine to deliver reproducible workshop results. The device pairs an 8 N bidirectional measuring force with a clear Swiss Digital readout and an ISO 17025 calibration certificate for documented quality assurance. Order the Precision Caliper directly via Metav Werkzeuge or ask consultants if needed.
Precision Caliper – Digital caliper, 0–300 mm, ISO 17025 (Microtech Metrology)
Precision Caliper with bidirectional 8 N measuring force, Swiss Digital display and IP67 rating for workshop and laboratory use
- ISO 17025 calibration with certificate
- IP67 water and dust protection
- 0–300 mm measuring range (standard)
- Swiss Digital display, 11 mm height
Traceable calibration for verifiable results
The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, which documents measurement traceability and supports quality audits. This level of verification is particularly relevant for service shops and quality departments that require documented proof of conformity. With the certificate, records for incoming inspection or production control are straightforward to compile and present.
Reproducible measurements through controlled contact force
A bidirectional 8 N measuring force with integrated force control reduces variation caused by differing operator pressure and improves repeatability on serial checks. The controlled contact ensures that thin-walled components and delicate surfaces are measured without deformation, while still providing a consistent tactile feedback for manual operation. This results in fewer re-measures and a faster throughput in inspection routines.
Designed for the shop floor: robust, readable and practical
Rated IP67, the caliper resists dust ingress and temporary immersion, making it suitable for harsher workshop environments as well as clean laboratory benches. The Swiss Digital display with 11 mm high digits offers clear legibility at a glance, and the instrument’s resolution of 0.01 mm enables standard fine measurements across the full 0–300 mm span. Hardened measuring faces contribute to long service life and stable contact geometry under frequent use, so the tool maintains its performance over time.
Practical handling and workplace efficiency
The combination of compact ergonomics and dedicated jaw geometry (jaw lengths 60/21 mm) supports both external and internal measurements without changing tools. The instrument’s classification as a standard-range caliper makes it a versatile choice for general machine‑shop tasks: it balances reach, stiffness and single‑hand operation for rapid checks on assemblies, fixtures and components. Integration into regular quality workflows is therefore straightforward, with less downtime for measurement changeovers.
For traceable workshop measurement, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply and technical advice for the Microtech Metrology precision caliper calibrated to ISO 17025
Technical Data
- Article number: 141078322C
- GTIN: 4061905036682
- Brand: Microtech Metrology
- Display: Swiss Digital, height 11 mm
- Protection rating: IP 67
Facts
- Measuring range: 0–300 mm
- Resolution: 0.01 mm
- Measuring force: 8 N
- Jaw length: 60/21 mm
Special features
- ISO 17025 calibration with certificate
- Hardened measuring faces
- Digital caliper design
- IP67 protection
FAQ
What calibration documentation is supplied with the caliper?
The caliper is delivered with an ISO 17025 calibration certificate, documenting traceability and measurement results for audit and quality records.
What accuracy can be expected across the 0–300 mm range?
With a display resolution of 0.01 mm and standard digital-caliper tolerances for this range, the device provides stable readings suitable for workshop quality control and inspection routines.
How does the 8 N measuring force benefit repetitive checks?
A consistent 8 N contact force reduces operator-induced variation and improves repeatability during serial measurements, making results more reliable across multiple operators.
Is the caliper suitable for use in a production environment?
Yes — the IP67 rating and hardened measuring faces make the instrument robust enough for typical shop-floor conditions while maintaining precise measurement capability.
Which measurement tasks does the jaw length support?
The jaw geometry (60/21 mm) is designed to handle both external and internal measurements efficiently, reducing the need to switch instruments for common inspection tasks.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Datenübertragung
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.