300mm Precision Caliper Digital Display 12.5mm Micro-USB ISO 17025 Calibrated, Hand-Finished Jaws - Microtech Metrology
€115.00
Product information "300mm Precision Caliper Digital Display 12.5mm Micro-USB ISO 17025 Calibrated, Hand-Finished Jaws - Microtech Metrology"
Take advantage of fully traceable ISO 17025 calibration, a clear digital display with 0.01 mm resolution and reliable Micro‑USB data output to streamline quality checks; order directly via Metav Werkzeuge or consult our advisers for integration and delivery.
Precision Caliper — Microtech Metrology, Digital 0–300 mm, ISO 17025-calibrated
A precision caliper designed for workshop and quality-control tasks, combining a large digital readout with traceable calibration and robust, hand-finished measuring faces for repeatable results.
- Large 12.5 mm digital display
- ISO 17025-calibrated with certificate included
- Micro‑USB data output for measurement logging
- Hand-finished measuring jaws and depth gauge
Faster, traceable measurements for production control
The large digital display (12.5 mm) with 0.01 mm resolution reduces read-off errors and speeds up inspection routines, making process control more efficient. With a clear numerical readout and a robust slider, this digital measuring instrument supports rapid sequence checks and hand‑held sampling without sacrificing clarity. The Micro‑USB interface simplifies data transfer to spreadsheets or inspection software, which cuts manual transcription and reduces risk of entry mistakes — a practical benefit for shops that log results or run traceability protocols.
Accuracy assured by certified calibration and workshop suitability
Delivered complete with an ISO 17025 calibration certificate, the device arrives ready for use in formal quality workflows and internal audits. The 0–300 mm measurement range places the tool firmly in the standard range (0–300 mm) category, which is optimised for everyday mechanical and metalworking tasks — a balance of reach, stiffness and one‑hand handling that fits most bench and shop requirements. Hand‑finished jaws improve contact repeatability on mating surfaces, while the integrated depth gauge extends usefulness for stepped and recess features, providing reliable single‑tool inspection for many components.
Built for integration and dependable workshop service
Constructed for routine use, the caliper pairs practical ergonomics with data capability so measurement becomes part of the process rather than a separate chore. The combination of hand-finished jaws and calibrated electronics yields measurement results that can be trusted for pass/fail decisions and incoming inspection. Connectivity via Micro‑USB supports digital archiving, and the compact footprint suits busy benches and inspection stations. As a component in a pragmatic quality strategy, this caliper reduces rework and supports consistent output — helping to keep production on schedule.
Discuss application details or booking from Metav Werkzeuge in Emmerich for quick delivery and professional advice on integration and calibration traceability
Technical Data
- Article number: 141083312
- GTIN: 4061905037986
- Manufacturer: Microtech Metrology
Core data
- Measurement range: 0–300 mm
- Display resolution: 0.01 mm
- Display height: 12.5 mm
- Jaw length: 60/21 mm
Special features
- Digital display (12.5 mm)
- Micro‑USB data output
- ISO 17025 calibration with certificate included
- Hand-finished measuring jaws
- Integrated depth gauge
- Digital readout
FAQ
Is the caliper delivered with an official calibration certificate?
Yes. The precision caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate.
What is the measurement resolution and suitability for workshop QC?
The instrument offers 0.01 mm resolution, suitable for standard machine‑shop quality control across the 0–300 mm range.
Can measurement data be exported to inspection software?
Yes. The device provides a Micro‑USB data output for straightforward transfer of readings into spreadsheets or measurement systems.
Which measurements can be performed with this caliper?
The caliper supports outside and inside measurements as well as depth checks, making it versatile for general inspection tasks.
What is the article number for ordering or referencing?
The SKU for this Microtech Metrology precision caliper is 141083312.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools