300mm Precision Digital Caliper Double Jaws 0.01mm Resolution IP54 ISO 17025 Calibrated, Micro-USB Data Output - Microtech Metrology
€189.00
Product information "300mm Precision Digital Caliper Double Jaws 0.01mm Resolution IP54 ISO 17025 Calibrated, Micro-USB Data Output - Microtech Metrology"
Benefit from consistent shop-floor results thanks to the combination of ±0.03 mm measurement accuracy, robust IP54 protection and an included ISO 17025 calibration certificate; the integrated Micro‑USB data output speeds up documentation and traceability. Order the Precision caliper directly via Metav Werkzeuge or ask our consultants if needed.
Precision caliper — digital 0–300 mm, Microtech Metrology
The Precision caliper is a digitally driven measuring instrument for workshop and quality‑control use, offering a 0–300 mm measuring range and clear-read display for efficient dimensional checks.
- Digital display 14 mm for fast reading
- Measuring range 0–300 mm for workshop tasks
- Accuracy ±0.03 mm, industrial standard
- ISO 17025 calibration included
Reliable accuracy for industrial measurement tasks
The instrument delivers ±0.03 mm accuracy across its 0–300 mm range, combining a 0.01 mm display resolution with repeatable mechanics to support production control and inspection procedures. Classified as a Standard range caliper, it balances reach and stiffness for the common needs of machining and metalwork; this makes it suitable for component checks, incoming inspections and rapid dimensional verifications. The clear, tall digital display (14 mm) reduces reading errors and shortens cycle time when multiple measurements are required.
Robust design and practical handling on the shop floor
Built to withstand daily use, the device includes IP54 protection against dust and splash water, which protects electronics and prolongs service life under workshop conditions. The double jaws (60/40) provide secure contact for external and internal measurements while maintaining jaw stability during clamping operations. Ergonomic controls and a compact form factor enable single‑hand operation and fast switching between measuring tasks, leading to fewer interruptions in production and a smoother inspection workflow.
Data output, calibration and traceability for quality systems
Equipped with a Micro‑USB data interface, the caliper enables direct capture of measurement values into spreadsheets or quality software, reducing transcription errors and supporting digital record‑keeping. The tool is supplied fully calibrated to ISO 17025, with a traceable calibration certificate included, ensuring documented measurement uncertainty and conformity with laboratory and quality‑assurance requirements. For customers who integrate measured values into production reports or SPC routines, this combination of a data interface and accredited calibration streamlines documentation and shortens audit preparation time.
For purchase or technical advice about this Microtech Metrology precision caliper and its integration into measurement routines, contact Metav Werkzeuge in Emmerich — our consultants will advise on suitability and delivery options.
Technical data
- Article number: 141083321
- GTIN: 4061905036309
- Manufacturer: Microtech Metrology
- ECLASS: 21170344
- SKU: 141083321
Facts
- Measuring range: 0–300 mm
- Display resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Digital display height: 14 mm
- Protection class: IP54
- Data interface: Micro‑USB
- Jaw lengths: 60/40 mm
- ISO 17025: calibration included
Special features
- Digital caliper for workshop and quality control
- Double measuring jaws for internal/external checks
- Supplied with ISO 17025 calibration certificate
- Robust housing suitable for shop‑floor conditions
- Fast data capture via Micro‑USB
FAQ
What is the measuring range and resolution of the caliper?
The caliper measures from 0 to 300 mm with a display resolution of 0.01 mm and an accuracy of ±0.03 mm.
Does the caliper come calibrated?
Yes — the tool is delivered fully calibrated with an ISO 17025 certificate included for traceability.
How are measurement results exported?
Measurement values can be exported via the integrated Micro‑USB interface for direct entry into inspection software or spreadsheets.
Is the device suitable for use on the shop floor?
With an IP54 rating and robust construction, the caliper is designed for everyday workshop and production environments.
What types of measurements can be performed with the jaws supplied?
The double jaws (60/40) support reliable external and internal dimensional checks required in machining and quality control.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools