300mm Digital Precision Caliper Long Inside Jaws IP54, ISO 17025 Calibrated - Microtech Metrology
€299.00
Product information "300mm Digital Precision Caliper Long Inside Jaws IP54, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of traceable calibration and robust workshop performance: the instrument combines an extended 0–300 mm measuring range with a clear digital readout and an ISO 17025 calibration certificate for guaranteed measurement reliability. Order through Metav Werkzeuge or consult our technical advisers for specification matching and delivery.
Digital Precision Caliper (0–300 mm, ISO 17025 calibrated) — Microtech Metrology
Digital Precision Caliper for general workshop and quality control tasks, offering a wide standard range and protected electronics for robust everyday use
- ISO 17025 calibration certificate included
- 0–300 mm measurement range
- Digital display with 0.01 mm resolution
- IP54 splash protection
Consistent, traceable results for shop-floor quality control
The caliper delivers reproducible readings across common workshop tasks thanks to its 0–300 mm range and a clear digital display with 0.01 mm resolution. The stated measurement accuracy of ±0.04 mm supports routine dimensional checks where fast, reliable decisions are required. These characteristics reduce rework and downtime by enabling quicker pass/fail assessments at control stations and on assembly benches. The instrument is suitable for both component inspection and setup verification in mechanical and metalworking environments.
Calibrated for compliance and audit readiness
Supplied with a full ISO 17025 calibration certificate, the measuring tool meets formal traceability requirements for quality systems and audits. The calibration documentation records the instrument’s performance against national standards and simplifies incorporation into internal quality records. For procurement and inspection processes that demand documented traceability, the included calibration certificate removes ambiguity and saves administrative effort during incoming inspection or periodic verification rounds.
Robust design that copes with workshop conditions
Protected to IP54, the caliper’s electronics are resistant to dust ingress and splashing fluids commonly encountered at machine tools and preparation benches. The slider and jaws are engineered for frequent handling: long measuring jaws (40 / 41.5 mm) extend access for internal measurements while maintaining jaw stiffness for repeatability. The combination of practical ergonomics and ingress protection supports prolonged service life in daily industrial use.
Practical efficiency and application focus
As a digital measuring instrument from Microtech Metrology, the caliper is tailored to standard machine‑shop needs: rapid readout, straightforward operation and a rugged specification minimise measurement interruptions. Typical applications include incoming part checks, set-up measurements and quick dimensional validation on the shop floor. The instrument’s features help streamline inspection routines and reduce the time spent transferring values into quality reports or process control systems.
Contact Metav Werkzeuge for delivery details, calibration documentation and advice on integrating the Microtech Metrology digital precision caliper into existing inspection procedures
Technical data
- SKU: 141130301
- GTIN: 4061905452376
- Manufacturer: Microtech Metrology
- ECLASS: 21170344
Numbers / Core technical data
- Measurement range: 0–300 mm
- Resolution (display): 0.01 mm
- Stated accuracy: ±0.04 mm
- Display height: 11 mm
- Jaw lengths: 40 / 41.5 mm
- Protection class: IP54
- Calibration: ISO 17025 certificate supplied
Special features / Designs
- Digital caliper design for workshop and quality control
- Long measuring jaws for internal measurements
- Robust slider and ergonomic thumb roll
- Supplied with traceable calibration documentation
FAQ
Is an official calibration certificate supplied with the caliper?
Yes. The Microtech Metrology digital precision caliper is delivered with an ISO 17025 calibration certificate, documenting traceability and measured values.
What measurement resolution and accuracy can be expected?
The instrument provides a 0.01 mm display resolution with a stated accuracy of ±0.04 mm, suitable for routine workshop and inspection tasks.
Is the caliper protected against coolant or dust?
The caliper carries an IP54 rating, offering protection against dust ingress and splashing liquids typical in machine-shop environments.
Can the caliper handle internal measurements reliably?
Yes. The long measuring jaws (40 / 41.5 mm) are designed to facilitate internal measurements while maintaining jaw stiffness for repeatable results.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools