300mm Digital Precision Caliper Long Internal Measuring Tips, IP67, ISO 17025 Calibrated - Microtech Metrology
€429.00
Product information "300mm Digital Precision Caliper Long Internal Measuring Tips, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of a robust, workshop-grade digital measuring instrument with IP67 protection and a 0–300 mm measuring range for dependable everyday use; the caliper arrives fully calibrated under ISO 17025 with a traceable calibration certificate. Order the instrument directly via Metav Werkzeuge or consult the Metav team for technical advice.
Digital Caliper (0–300 mm) by Microtech Metrology — IP67, ISO 17025
The Digital Caliper (0–300 mm) is a rugged, precision measuring instrument designed for general machine‑shop and metalworking tasks where repeatable results and environmental resistance are required.
- IP67 protection for wet and dusty environments
- Delivered with ISO 17025 calibration certificate
- 0–300 mm range, 0.01 mm resolution
- 11 mm high digital display for clear readout
Consistent measurement performance for production environments
With a measuring range of 0–300 mm and an electronic resolution of 0.01 mm, this digital caliper is sized for the standard workshop needs of maintenance, production inspection and toolroom use. The instrument’s specified accuracy of 0.04 mm ensures that checks on finished parts, fixtures and assemblies remain within practical tolerance bands for everyday mechanical and metalworking tasks. The large 11 mm digital display improves legibility in busy workplaces, reducing reading errors and speeding routine checks.
Built to withstand workshop conditions and daily handling
Rated IP67, the caliper is protected against dust ingress and short‑term water immersion, which adds reliability in harsher production environments or near coolants and oils. The unit’s robust construction and long internal measuring tips (40/41.5 mm) extend the useful jaw reach for deeper internal features while preserving jaw stiffness. This combination of environmental protection and extended jaw geometry reduces rework caused by damaged instruments and supports longer service intervals.
Ergonomics and practical operation that save time
The instrument’s intuitive digital function and crisp display make measurement faster than interpreting nonius scales, while the electronic reading reduces subjective reading error. The long tip geometry provides better access for internal measurements without needing specialized gauges, and the smooth slide action with secure locking allows repeatable set‑ups. For calibration-sensitive workflows the included ISO 17025 certificate documents traceability and simplifies quality‑management records for incoming inspections or in‑house audits.
Traceability and quality assurance for serial production
Delivered fully calibrated according to ISO 17025, the caliper comes with a traceable calibration certificate suitable for integration into formal inspection routines. This guarantees documented measurement performance and supports compliance with quality systems. As a standard-range instrument, it covers the most common workshop tasks while offering data suitable for statistical process control and operator checks, increasing confidence in pass/fail decisions on the shop floor.
For traceable, workshop-ready measurements contact Metav Werkzeuge to order the Microtech digital caliper with ISO 17025 calibration and to discuss immediate delivery from Emmerich.
Technical data
- Article number: 141130303
- GTIN: 4061905452390
- Brand: Microtech Metrology
Facts
- Measuring range: 0–300 mm
- Resolution: 0.01 mm
- Specified accuracy: 0.04 mm
- Display height: 11 mm
- Protection class: IP67
- Long measuring tips: 40 / 41.5 mm
Special features
- Digital caliper, workshop grade
- Delivered with ISO 17025 calibration certificate
- Robust, sealed electronics
- Large, high‑contrast digital display
FAQ
What measuring range does the caliper cover?
The Microtech digital caliper covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop applications.
Is the instrument delivered calibrated and traceable?
Yes, the caliper is supplied fully calibrated according to ISO 17025 and includes a calibration certificate for traceable documentation.
Can the caliper be used near coolants or in dusty areas?
With an IP67 rating, the instrument is protected against dust ingress and temporary immersion, making it suitable for challenging workshop conditions.
How legible is the display for rapid checks?
The caliper features a clear 11 mm high digital display, designed for quick and reliable readings during repetitive inspection tasks.
Do the long internal tips improve access for internal measurements?
The extended tip lengths of 40 / 41.5 mm increase reach for internal features, enabling measurements in deeper bores and recesses without specialised fixtures.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.