22-300mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67 - Microtech Metrology
€569.00
Product information "22-300mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67 - Microtech Metrology"
Take advantage of the combination of robust ingress protection, clear Swiss Digit read‑out and a practical 22–300 mm measuring range for reliable internal dimension control in production and workshop environments; order the Internal Digital Caliper directly via Metav Werkzeuge or ask our consultants if needed.
Internal Digital Caliper by Microtech Metrology — IP67, 22–300 mm range
The Internal Digital Caliper from Microtech Metrology is a rugged, workshop‑ready instrument for precise internal dimension checks across the standard 22–300 mm range.
- IP67 dust- and water-resistant housing
- Swiss Digit 11 mm high-contrast display
- Measurement range 22–300 mm for workshop standards
Reliable precision that keeps production moving
With a stated accuracy of 0.05 mm and a display resolution of 0.01 mm, this instrument delivers measurable improvements in inspection speed and repeatability compared with analogue gauges. The caliper’s measuring span is classified within the standard range (max 300 mm), which offers an optimal balance of reach and rigidity for general engineering, maintenance and quality‑control tasks. The clear numeric read‑out reduces interpretive error, shortening cycle times in repetitive checks and supporting faster decision‑making on the shop floor.
Robust construction and a clear digital display for fewer interruptions
The IP67 rating means the device resists dust ingress and temporary immersion, protecting the electronics during everyday use and cleaning. The Swiss Digit 11 mm display provides high‑contrast digits that are readable under factory lighting, reducing eye strain and missed readings. A longer internal jaw (150 mm) helps access deeper bores and recessed features without improvised fixturing. Together, these design choices lower downtime and the need for repeat measures, supporting a smoother production flow.
Practical features that support traceable workshop inspection
Designed by Microtech Metrology for routine internal measurements, the instrument is suited to both standalone checks and batch inspection routines. The compact electronics and ergonomic slide mechanism permit single‑hand operation for quick sampling; the robust enclosure reduces risk of damage from coolant splash or fine particulate. For purchasers seeking a dependable, entry‑to‑mid level digital measuring tool, this caliper bridges bench‑tool convenience with industrial resilience, making it a solid choice for machine shops and service departments.
Contact Metav Werkzeuge today to discuss how Microtech Metrology’s IP67 internal digital caliper can improve inspection reliability in your workshop — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and immediate ordering support
Technical Data
- Article number (SKU): 141210303
- GTIN: 4061905457784
- Manufacturer: Microtech Metrology
- Digital display: Swiss Digit, 11 mm
- Protection class: IP67
Facts
- Measuring range: 22–300 mm
- Resolution: 0.01 mm
- Accuracy: 0.05 mm
- Inner jaw length: 150 mm
Special features
- Digital instrument for internal dimension measurement
- Workshop‑grade ingress protection
- High‑contrast numeric read‑out
FAQ
What measurement tasks is this caliper best suited for?
The internal digital caliper is tailored to internal dimension checks—bores, recesses and similar features—across the 22–300 mm span, making it suitable for general machine‑shop and maintenance inspection.
How precise is the instrument for routine quality control?
The caliper provides a resolution of 0.01 mm and a declared accuracy of 0.05 mm, which is appropriate for standard production sampling and workshop tolerance verification.
Does the device tolerate coolant and shop dust?
Yes—the IP67 protection rating means the instrument is resistant to dust ingress and temporary immersion, improving durability in harsher workshop conditions.
Is the read‑out easy to read under factory lighting?
The Swiss Digit 11 mm display offers high‑contrast numerals designed for clear readability in typical workshop illumination, reducing reading errors and inspection time.
Who manufactures this caliper and where can more technical information be obtained?
The instrument is produced by Microtech Metrology; further product and ordering details are available from Metav Werkzeuge.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.