150mm Digital Caliper For Pipe Wall Thickness Measurement, Swiss Digit Display 11mm, IP67, Calibrated To ISO 17025 - Microtech Metrology
€399.00
Product information "150mm Digital Caliper For Pipe Wall Thickness Measurement, Swiss Digit Display 11mm, IP67, Calibrated To ISO 17025 - Microtech Metrology"
Benefit from ISO 17025‑calibrated accuracy, IP67 protection and a dual measuring force for consistent pipe‑wall and general workshop measurements; order this precision digital caliper directly via Metav Werkzeuge or contact our consultants for tailored advice.
Microtech digital caliper (0–150 mm) — ISO 17025 calibrated, IP67 protected
The Microtech digital caliper is a robust, workshop-grade digital measuring instrument for precise length checks within a 0–150 mm range.
- ISO 17025‑calibrated delivery
- IP67 dust- and water‑resistant
- Swiss Digit 11 mm display
- Dual measuring force for repeatability
Accuracy guaranteed for quality control
Delivered fully calibrated to ISO 17025, this digital caliper provides documented measurement traceability and a calibration certificate included with the instrument. With a specified accuracy of ±0.015 mm and a reading resolution of 0.001 mm, the device combines traceable precision and fine resolution suitable for tighter quality‑control tolerances. The formal calibration process reduces acceptance risk during incoming‑inspection and supports repeatable inspection routines in production environments.
Durable design for workshop conditions
Constructed for everyday industrial use, the instrument is rated IP67, offering reliable protection against dust ingress and temporary immersion in water. The clear Swiss Digit 11 mm display ensures rapid numeric legibility on the shop floor, while a jaw length of 46 mm gives practical reach for many common measurement tasks. The calibrated dual measuring force (8 N external and 4 N internal) stabilises contact pressure and reduces operator‑induced variation, improving repeatability when measuring both external and internal dimensions.
Practical range and suitability for standard tasks
Classified as a standard caliper for the 0–150 mm measuring range, the tool hits the balance between reach and rigidity that workshops and quality departments require. This size is ideal for machine building, component inspection and general metrology tasks where ergonomic one‑hand operation and robust construction matter. The data sheet values and industrial protection rating make the device appropriate for regular use in manufacturing, maintenance and inspection workflows where documented accuracy and durability are priorities.
Contact Metav Werkzeuge for technical advice and to secure an ISO 17025‑calibrated digital caliper ready for delivery from Emmerich
Technical data
- SKU: 141230156
- GTIN: 4061905457852
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–150 mm
- Resolution (reading): 0.001 mm
- Accuracy: ±0.015 mm
- Display height: 11 mm
- Jaw length: 46 mm
- Protection class: IP67
- Measuring force: 8 N external / 4 N internal
Special features
- ISO 17025 calibration with certificate included
- Swiss Digit display for clear readout
- Digital caliper, standard class (100–300 mm category)
- Dual measuring force to reduce operator influence
- Suitable for workshop and quality‑control applications
FAQ
Is this caliper supplied with a calibration certificate?
Yes. The Microtech digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate with the instrument.
What accuracy and resolution can be expected?
The caliper offers a resolution of 0.001 mm and a specified accuracy of ±0.015 mm, making it suitable for precise workshop and inspection tasks.
Can the tool be used in wet or dusty environments?
With an IP67 rating, the instrument is protected against dust ingress and temporary immersion, making it resilient in typical workshop conditions.
How does the dual measuring force help measurement results?
The dual measuring force (8 N external, 4 N internal) stabilises contact pressure for external and internal checks, improving reproducibility and reducing operator‑related variance.
Is the 0–150 mm range suitable for general machine‑shop work?
Yes; the 0–150 mm range places the caliper in the standard class, offering an effective compromise between reach and stiffness for everyday machine‑shop and quality‑control measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.