200mm Digital Precision Caliper for Pipe Wall Thickness Measurement Swiss Digit Display IP67, ISO 17025 Calibrated - Microtech Metrology
€319.00
Product information "200mm Digital Precision Caliper for Pipe Wall Thickness Measurement Swiss Digit Display IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of precise, traceable measurement delivered with robust ingress protection and handcrafted measuring jaws — ideal for reliable workshop quality control. Choose the calibrated solution with ISO 17025 certification and quick-read digital display; order via Metav Werkzeuge or consult our advisors for application-specific advice.
Digital Caliper 0–200 mm by Microtech Metrology — IP67, ISO 17025 calibrated
A Digital Caliper 0–200 mm designed for standard workshop and industrial measurement tasks, combining rugged protection and metrological traceability in a compact instrument.
- IP67 protection for harsh environments
- ISO 17025-calibrated with certificate
- High-precision 0.01 mm resolution
Consistent accuracy for quality assurance
The instrument delivers a reproducible measurement basis thanks to its 0.01 mm resolution and an indicated accuracy of ±0.03 mm; this makes it suitable for standard machining and incoming inspection where repeatable tolerances matter. The included ISO 17025 calibration and accompanying certificate provide documented traceability for production records and audit purposes, reducing uncertainty in part acceptance and supporting quality-management processes.
Built to withstand workshop conditions
Engineered for everyday industrial use, this caliper carries an IP67 rating that protects internal electronics from dust and temporary immersion, extending service intervals in wet or chip-prone environments. The handcrafted measuring jaws and a 50 mm jaw length ensure a secure contact geometry, while the slide is self-lubricating for smooth operation under frequent use. Together these features reduce handling errors and deliver robust performance on the shop floor.
Faster inspections, fewer reworks
The combination of a clear Swiss Digit display (11 mm high digits) and a compact 0–200 mm measuring range speeds routine checks without compromising rigidity — classified as a Standard caliper size that balances reach and stiffness for most metalworking tasks. Rapid, legible readings and the instrument’s mechanical quality help to shorten inspection cycles, supporting throughput improvements and fewer corrective actions during production.
For ISO 17025-certified measurement with rugged IP67 protection, contact Metav Werkzeuge to discuss delivery options or specific application requirements and secure the right measuring solution for your process.
Technical Data
- Article number: 141230203
- GTIN: 4061905037375
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–200 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Jaw length: 50 mm
- Display height: 11 mm
Special features
- IP67 protection
- ISO 17025 calibration with certificate
- Handcrafted measuring jaws
- Self-lubricating slide
- Swiss Digit display
FAQ
What measuring range does this caliper cover?
The caliper measures within a 0–200 mm range, making it a Standard-size instrument for workshop and machine-shop applications.
Is the instrument delivered calibrated?
Yes — the Digital Caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability.
How precise is the readout?
The readout resolution is 0.01 mm with an overall stated accuracy of ±0.03 mm, suitable for standard quality-control tasks.
Can this caliper be used in damp or dusty environments?
The caliper is rated IP67, which protects the electronics from dust and temporary immersion, so it is well suited to harsher workshop conditions.
Who manufactures this caliper?
The instrument is produced by Microtech Metrology (see manufacturer details below)
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.