150mm Precision Caliper Digital Swiss Display 0.01mm Resolution ±0.03mm, IP67 Self-Lubricating - Microtech Metrology
€299.00
Product information "150mm Precision Caliper Digital Swiss Display 0.01mm Resolution ±0.03mm, IP67 Self-Lubricating - Microtech Metrology"
Reliable workshop measurements are attainable with IP67 protection, 0.03 mm accuracy and a clear Swiss Digital display; combine these features for consistent inspection results and order via Metav Werkzeuge or consult our specialists for application advice.
Digital Precision Caliper — Microtech Metrology, IP67, 0–150 mm
The Digital Precision Caliper from Microtech Metrology delivers robust, IP67-protected measurement for standard workshop and quality-control tasks across a 0–150 mm range.
- IP67 protection for harsh environments
- 0.03 mm accuracy for reliable measurements
- Swiss Digital display, 11 mm height
Engineered reach and industrial accuracy
The instrument covers a 0–150 mm measuring range, placing it in the Standard class for machine and metalworking tasks where a balance of reach and stiffness is essential. With a display resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, the caliper supports routine dimensional checks and incoming inspections. The combination of fine resolution and workshop-grade accuracy shortens decision cycles at the inspection bench and reduces rework caused by undetected deviations.
Protection and build that reduce downtime
Built to withstand demanding environments, the caliper carries an IP67 rating, which protects the electronic display and slider from dust ingress and temporary immersion. The smooth operation is enhanced by a self-lubricating slider surface and a jaw geometry with a 25 mm beak length, improving stability during external measurements. These attributes extend service intervals, lower maintenance effort and keep measurement throughput steady under daily workshop conditions.
Readability and handling for efficient workflows
A high-contrast Swiss Digital display with an 11 mm digit height improves legibility at the bench, reducing interpretation errors and speeding up repetitive tasks. The digital readout complements the mechanical guidance so that each measurement is quick to capture and document. Note that the device is specified without an integrated measuring-force control; consistent handling and steady contact pressure ensure repeatable results when using this class of caliper.
Practical applications and supplier confidence
This caliper is suited to general inspection, assembly verification and quality control in metalworking and mechanical workshops, and it is particularly useful where a compact 150 mm range is the workshop standard. Supplied by Microtech Metrology and available through Metav Werkzeuge, the instrument benefits from established distribution channels that make precision accessible across industry and trade, supporting reliable supply and practical purchase choices.
For workshop-grade, IP67-protected measurement and expert advice on the Microtech Metrology Digital Precision Caliper (SKU 141430153), contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to request a tailored quotation
Technical data
- Article number: 141430153
- GTIN: 4061905037771
- Manufacturer: Microtech Metrology
- ECLASS: 21170344
Facts
- Measuring range: 0–150 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Jaw (beak) length: 25 mm
Special features
- Digital display: Swiss Digital, 11 mm digit height
- Protection class: IP67
- Self-lubricating slider
- No built-in measuring-force control
- Digital instrument for external measurements
FAQ
What is the measuring range of the Digital Precision Caliper?
The Digital Precision Caliper from Microtech Metrology has a measuring range of 0–150 mm, categorised as a Standard-length caliper suitable for general workshop use.
What resolution and accuracy does this caliper provide?
The Digital Precision Caliper provides a display resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, matching typical requirements for machine‑shop dimensional checks.
Is the caliper protected against dust and moisture?
The Digital Precision Caliper carries an IP67 rating, which means the instrument is dust-tight and protected against temporary immersion in water, making it suitable for harsher workshop environments.
Which display is fitted to the caliper and how readable is it?
The caliper is fitted with a Swiss Digital display featuring 11 mm high digits, offering clear legibility at the inspection bench for faster, less error-prone readings.
For which workshop tasks is this caliper most appropriate?
This Digital Precision Caliper (Microtech Metrology, SKU 141430153) is ideal for routine inspection, assembly checks and quality-control tasks in metalworking and mechanical workshops where a 0–150 mm range is required.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.