150mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution, IP67, ISO 17025 Calibrated - Microtech Metrology
€429.00
Product information "150mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the combination of IP67 protection, 0.01 mm resolution and delivery with an ISO 17025 calibration certificate for dependable workshop measurements; order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice.
Digital Caliper — Microtech Metrology with IP67 protection and ISO 17025 calibration
The Digital Caliper is a Standard-range precision measuring instrument designed for workshop and quality-control tasks, featuring a clear Swiss Digit 11 mm display and a measuring range of 0–150 mm.
- Swiss Digit display 11 mm high
- Resolution 0.01 mm for fine readings
- IP67 protection against dust and water
- Delivered calibrated to ISO 17025
Reliable precision for everyday inspection needs
Equipped with a Swiss Digit 11 mm display and a resolution of 0.01 mm, this caliper delivers readable results that speed up routine inspections and minimise transcription errors. The instrument is classified in the Standard range, covering 0–150 mm, which represents the typical workshop balance between reach and stiffness for tasks in machining and general metalwork. Readout clarity and fine resolution support consistent quality-control decisions without requiring specialist interpretation.
Robust design for repeatable measurements in the workshop
Built for demanding environments, the caliper's IP67 ingress protection ensures reliable operation at the machine bench or in dusty production areas; occasional splashes will not interrupt measurement sequences. The device features dual measuring force (8 N external and 4 N internal), which helps maintain consistent contact pressure for external and internal dimensions and reduces operator-induced variation. Together, these properties increase measurement repeatability and protect investment by extending service intervals.
Traceable calibration and audit-ready documentation
Supplied with an ISO 17025 calibration certificate, the instrument supports traceability requirements for quality systems and audit procedures. The calibration certificate documents the verification performed and provides confidence for acceptance in supplier control, incoming inspection and in-house calibration schedules. Integration into existing quality documentation is straightforward, and the clear numeric display facilitates fast recording of results during inspections.
For traceable, workshop-ready precision request the ISO 17025-calibrated Microtech Metrology digital caliper (SKU 141430156) from Metav Werkzeuge — our Emmerich-based consultants will advise on optimal calibration intervals and suitability for specific measurement tasks.
Technical data
- SKU: 141430156
- GTIN: 4061905459450
- Manufacturer: Microtech Metrology
- Digital display: Swiss Digit, height 11 mm
- IP rating: IP 67
- Calibration: ISO 17025 certificate included
Facts
- Measuring range: 0–150 mm
- Resolution: 0.01 mm
- Measuring force external: 8 N
- Measuring force internal: 4 N
Special features
- Standard range caliper suitable for machining and metalwork
- Robust housing and sealed electronics for harsh environments
- Clear, high-contrast digital readout for rapid readings
- Delivered with traceable calibration certificate
FAQ
What is the measuring range and classification of this caliper?
The caliper covers 0–150 mm and is classified in the Standard range, offering a practical balance of reach and stiffness for general workshop and machine-shop measurements.
Is the instrument delivered calibrated and suitable for audits?
Yes, the digital caliper from Microtech Metrology is supplied with an ISO 17025 calibration certificate, making it suitable for supplier control and internal audits.
How resistant is the caliper to shop-floor conditions?
The device has an IP67 rating, protecting electronics from dust ingress and temporary immersion, which supports use at the machine bench or in harsher workshop environments.
What sort of resolution and readout can be expected?
Readings are shown on a Swiss Digit 11 mm display with a resolution of 0.01 mm, providing clear and repeatable numeric results for standard quality-control tasks.
Does the caliper help reduce operator influence on measurements?
The caliper features a dual measuring force setup (8 N external, 4 N internal) that promotes consistent contact pressure, which improves repeatability and reduces measurement scatter related to manual handling.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.